| // SPDX-License-Identifier: MIT |
| /* Copyright © 2024 Intel Corporation */ |
| |
| #include <linux/debugfs.h> |
| |
| #include <drm/display/drm_dp.h> |
| #include <drm/display/drm_dp_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_file.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "intel_ddi.h" |
| #include "intel_de.h" |
| #include "intel_display_regs.h" |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_dp_link_training.h" |
| #include "intel_dp_mst.h" |
| #include "intel_dp_test.h" |
| |
| void intel_dp_test_reset(struct intel_dp *intel_dp) |
| { |
| /* |
| * Clearing compliance test variables to allow capturing |
| * of values for next automated test request. |
| */ |
| memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); |
| } |
| |
| /* Adjust link config limits based on compliance test requests. */ |
| void intel_dp_test_compute_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| struct link_config_limits *limits) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| /* For DP Compliance we override the computed bpp for the pipe */ |
| if (intel_dp->compliance.test_data.bpc != 0) { |
| int bpp = 3 * intel_dp->compliance.test_data.bpc; |
| |
| limits->pipe.min_bpp = bpp; |
| limits->pipe.max_bpp = bpp; |
| pipe_config->dither_force_disable = bpp == 6 * 3; |
| |
| drm_dbg_kms(display->drm, "Setting pipe_bpp to %d\n", bpp); |
| } |
| |
| /* Use values requested by Compliance Test Request */ |
| if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) { |
| int index; |
| |
| /* Validate the compliance test data since max values |
| * might have changed due to link train fallback. |
| */ |
| if (intel_dp_link_params_valid(intel_dp, intel_dp->compliance.test_link_rate, |
| intel_dp->compliance.test_lane_count)) { |
| index = intel_dp_rate_index(intel_dp->common_rates, |
| intel_dp->num_common_rates, |
| intel_dp->compliance.test_link_rate); |
| if (index >= 0) { |
| limits->min_rate = intel_dp->compliance.test_link_rate; |
| limits->max_rate = intel_dp->compliance.test_link_rate; |
| } |
| limits->min_lane_count = intel_dp->compliance.test_lane_count; |
| limits->max_lane_count = intel_dp->compliance.test_lane_count; |
| } |
| } |
| } |
| |
| /* Compliance test status bits */ |
| #define INTEL_DP_RESOLUTION_PREFERRED 1 |
| #define INTEL_DP_RESOLUTION_STANDARD 2 |
| #define INTEL_DP_RESOLUTION_FAILSAFE 3 |
| |
| static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| int status = 0; |
| int test_link_rate; |
| u8 test_lane_count, test_link_bw; |
| /* (DP CTS 1.2) |
| * 4.3.1.11 |
| */ |
| /* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */ |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT, |
| &test_lane_count); |
| |
| if (status <= 0) { |
| drm_dbg_kms(display->drm, "Lane count read failed\n"); |
| return DP_TEST_NAK; |
| } |
| test_lane_count &= DP_MAX_LANE_COUNT_MASK; |
| |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE, |
| &test_link_bw); |
| if (status <= 0) { |
| drm_dbg_kms(display->drm, "Link Rate read failed\n"); |
| return DP_TEST_NAK; |
| } |
| test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw); |
| |
| /* Validate the requested link rate and lane count */ |
| if (!intel_dp_link_params_valid(intel_dp, test_link_rate, |
| test_lane_count)) |
| return DP_TEST_NAK; |
| |
| intel_dp->compliance.test_lane_count = test_lane_count; |
| intel_dp->compliance.test_link_rate = test_link_rate; |
| |
| return DP_TEST_ACK; |
| } |
| |
| static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| u8 test_pattern; |
| u8 test_misc; |
| __be16 h_width, v_height; |
| int status = 0; |
| |
| /* Read the TEST_PATTERN (DP CTS 3.1.5) */ |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN, |
| &test_pattern); |
| if (status <= 0) { |
| drm_dbg_kms(display->drm, "Test pattern read failed\n"); |
| return DP_TEST_NAK; |
| } |
| if (test_pattern != DP_COLOR_RAMP) |
| return DP_TEST_NAK; |
| |
| status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI, |
| &h_width, 2); |
| if (status <= 0) { |
| drm_dbg_kms(display->drm, "H Width read failed\n"); |
| return DP_TEST_NAK; |
| } |
| |
| status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI, |
| &v_height, 2); |
| if (status <= 0) { |
| drm_dbg_kms(display->drm, "V Height read failed\n"); |
| return DP_TEST_NAK; |
| } |
| |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0, |
| &test_misc); |
| if (status <= 0) { |
| drm_dbg_kms(display->drm, "TEST MISC read failed\n"); |
| return DP_TEST_NAK; |
| } |
| if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB) |
| return DP_TEST_NAK; |
| if (test_misc & DP_TEST_DYNAMIC_RANGE_CEA) |
| return DP_TEST_NAK; |
| switch (test_misc & DP_TEST_BIT_DEPTH_MASK) { |
| case DP_TEST_BIT_DEPTH_6: |
| intel_dp->compliance.test_data.bpc = 6; |
| break; |
| case DP_TEST_BIT_DEPTH_8: |
| intel_dp->compliance.test_data.bpc = 8; |
| break; |
| default: |
| return DP_TEST_NAK; |
| } |
| |
| intel_dp->compliance.test_data.video_pattern = test_pattern; |
| intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width); |
| intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height); |
| /* Set test active flag here so userspace doesn't interrupt things */ |
| intel_dp->compliance.test_active = true; |
| |
| return DP_TEST_ACK; |
| } |
| |
| static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| u8 test_result = DP_TEST_ACK; |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| struct drm_connector *connector = &intel_connector->base; |
| |
| if (!intel_connector->detect_edid || connector->edid_corrupt || |
| intel_dp->aux.i2c_defer_count > 6) { |
| /* Check EDID read for NACKs, DEFERs and corruption |
| * (DP CTS 1.2 Core r1.1) |
| * 4.2.2.4 : Failed EDID read, I2C_NAK |
| * 4.2.2.5 : Failed EDID read, I2C_DEFER |
| * 4.2.2.6 : EDID corruption detected |
| * Use failsafe mode for all cases |
| */ |
| if (intel_dp->aux.i2c_nack_count > 0 || |
| intel_dp->aux.i2c_defer_count > 0) |
| drm_dbg_kms(display->drm, |
| "EDID read had %d NACKs, %d DEFERs\n", |
| intel_dp->aux.i2c_nack_count, |
| intel_dp->aux.i2c_defer_count); |
| intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE; |
| } else { |
| /* FIXME: Get rid of drm_edid_raw() */ |
| const struct edid *block = drm_edid_raw(intel_connector->detect_edid); |
| |
| /* We have to write the checksum of the last block read */ |
| block += block->extensions; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM, |
| block->checksum) <= 0) |
| drm_dbg_kms(display->drm, |
| "Failed to write EDID checksum\n"); |
| |
| test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE; |
| intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED; |
| } |
| |
| /* Set test active flag here so userspace doesn't interrupt things */ |
| intel_dp->compliance.test_active = true; |
| |
| return test_result; |
| } |
| |
| static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_dp_phy_test_params *data = |
| &intel_dp->compliance.test_data.phytest; |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| enum pipe pipe = crtc->pipe; |
| u32 pattern_val; |
| |
| switch (data->phy_pattern) { |
| case DP_LINK_QUAL_PATTERN_DISABLE: |
| drm_dbg_kms(display->drm, "Disable Phy Test Pattern\n"); |
| intel_de_write(display, DDI_DP_COMP_CTL(pipe), 0x0); |
| if (DISPLAY_VER(display) >= 10) |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), |
| DP_TP_CTL_TRAIN_PAT4_SEL_MASK | DP_TP_CTL_LINK_TRAIN_MASK, |
| DP_TP_CTL_LINK_TRAIN_NORMAL); |
| break; |
| case DP_LINK_QUAL_PATTERN_D10_2: |
| drm_dbg_kms(display->drm, "Set D10.2 Phy Test Pattern\n"); |
| intel_de_write(display, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2); |
| break; |
| case DP_LINK_QUAL_PATTERN_ERROR_RATE: |
| drm_dbg_kms(display->drm, |
| "Set Error Count Phy Test Pattern\n"); |
| intel_de_write(display, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | |
| DDI_DP_COMP_CTL_SCRAMBLED_0); |
| break; |
| case DP_LINK_QUAL_PATTERN_PRBS7: |
| drm_dbg_kms(display->drm, "Set PRBS7 Phy Test Pattern\n"); |
| intel_de_write(display, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7); |
| break; |
| case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM: |
| /* |
| * FIXME: Ideally pattern should come from DPCD 0x250. As |
| * current firmware of DPR-100 could not set it, so hardcoding |
| * now for compliance test. |
| */ |
| drm_dbg_kms(display->drm, |
| "Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n"); |
| pattern_val = 0x3e0f83e0; |
| intel_de_write(display, DDI_DP_COMP_PAT(pipe, 0), pattern_val); |
| pattern_val = 0x0f83e0f8; |
| intel_de_write(display, DDI_DP_COMP_PAT(pipe, 1), pattern_val); |
| pattern_val = 0x0000f83e; |
| intel_de_write(display, DDI_DP_COMP_PAT(pipe, 2), pattern_val); |
| intel_de_write(display, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | |
| DDI_DP_COMP_CTL_CUSTOM80); |
| break; |
| case DP_LINK_QUAL_PATTERN_CP2520_PAT_1: |
| /* |
| * FIXME: Ideally pattern should come from DPCD 0x24A. As |
| * current firmware of DPR-100 could not set it, so hardcoding |
| * now for compliance test. |
| */ |
| drm_dbg_kms(display->drm, |
| "Set HBR2 compliance Phy Test Pattern\n"); |
| pattern_val = 0xFB; |
| intel_de_write(display, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 | |
| pattern_val); |
| break; |
| case DP_LINK_QUAL_PATTERN_CP2520_PAT_3: |
| if (DISPLAY_VER(display) < 10) { |
| drm_warn(display->drm, |
| "Platform does not support TPS4\n"); |
| break; |
| } |
| drm_dbg_kms(display->drm, |
| "Set TPS4 compliance Phy Test Pattern\n"); |
| intel_de_write(display, DDI_DP_COMP_CTL(pipe), 0x0); |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), |
| DP_TP_CTL_TRAIN_PAT4_SEL_MASK | DP_TP_CTL_LINK_TRAIN_MASK, |
| DP_TP_CTL_TRAIN_PAT4_SEL_TP4A | DP_TP_CTL_LINK_TRAIN_PAT4); |
| break; |
| default: |
| drm_warn(display->drm, "Invalid Phy Test Pattern\n"); |
| } |
| } |
| |
| static void intel_dp_process_phy_request(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_dp_phy_test_params *data = |
| &intel_dp->compliance.test_data.phytest; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| |
| if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX, |
| link_status) < 0) { |
| drm_dbg_kms(display->drm, "failed to get link status\n"); |
| return; |
| } |
| |
| /* retrieve vswing & pre-emphasis setting */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, |
| link_status); |
| |
| intel_dp_set_signal_levels(intel_dp, crtc_state, DP_PHY_DPRX); |
| |
| intel_dp_phy_pattern_update(intel_dp, crtc_state); |
| |
| drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET, |
| intel_dp->train_set, crtc_state->lane_count); |
| |
| drm_dp_set_phy_test_pattern(&intel_dp->aux, data, |
| intel_dp->dpcd[DP_DPCD_REV]); |
| } |
| |
| static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_dp_phy_test_params *data = |
| &intel_dp->compliance.test_data.phytest; |
| |
| if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) { |
| drm_dbg_kms(display->drm, |
| "DP Phy Test pattern AUX read failure\n"); |
| return DP_TEST_NAK; |
| } |
| |
| /* Set test active flag here so userspace doesn't interrupt things */ |
| intel_dp->compliance.test_active = true; |
| |
| return DP_TEST_ACK; |
| } |
| |
| void intel_dp_test_request(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| u8 response = DP_TEST_NAK; |
| u8 request = 0; |
| int status; |
| |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request); |
| if (status <= 0) { |
| drm_dbg_kms(display->drm, |
| "Could not read test request from sink\n"); |
| goto update_status; |
| } |
| |
| switch (request) { |
| case DP_TEST_LINK_TRAINING: |
| drm_dbg_kms(display->drm, "LINK_TRAINING test requested\n"); |
| response = intel_dp_autotest_link_training(intel_dp); |
| break; |
| case DP_TEST_LINK_VIDEO_PATTERN: |
| drm_dbg_kms(display->drm, "TEST_PATTERN test requested\n"); |
| response = intel_dp_autotest_video_pattern(intel_dp); |
| break; |
| case DP_TEST_LINK_EDID_READ: |
| drm_dbg_kms(display->drm, "EDID test requested\n"); |
| response = intel_dp_autotest_edid(intel_dp); |
| break; |
| case DP_TEST_LINK_PHY_TEST_PATTERN: |
| drm_dbg_kms(display->drm, "PHY_PATTERN test requested\n"); |
| response = intel_dp_autotest_phy_pattern(intel_dp); |
| break; |
| default: |
| drm_dbg_kms(display->drm, "Invalid test request '%02x'\n", |
| request); |
| break; |
| } |
| |
| if (response & DP_TEST_ACK) |
| intel_dp->compliance.test_type = request; |
| |
| update_status: |
| status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response); |
| if (status <= 0) |
| drm_dbg_kms(display->drm, |
| "Could not write test response to sink\n"); |
| } |
| |
| /* phy test */ |
| |
| static int intel_dp_prep_phy_test(struct intel_dp *intel_dp, |
| struct drm_modeset_acquire_ctx *ctx, |
| u8 *pipe_mask) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_connector_list_iter conn_iter; |
| struct intel_connector *connector; |
| int ret = 0; |
| |
| *pipe_mask = 0; |
| |
| drm_connector_list_iter_begin(display->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *conn_state = |
| connector->base.state; |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| |
| if (!intel_dp_has_connector(intel_dp, conn_state)) |
| continue; |
| |
| crtc = to_intel_crtc(conn_state->crtc); |
| if (!crtc) |
| continue; |
| |
| ret = drm_modeset_lock(&crtc->base.mutex, ctx); |
| if (ret) |
| break; |
| |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| drm_WARN_ON(display->drm, |
| !intel_crtc_has_dp_encoder(crtc_state)); |
| |
| if (!crtc_state->hw.active) |
| continue; |
| |
| if (conn_state->commit && |
| !try_wait_for_completion(&conn_state->commit->hw_done)) |
| continue; |
| |
| *pipe_mask |= BIT(crtc->pipe); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return ret; |
| } |
| |
| static int intel_dp_do_phy_test(struct intel_encoder *encoder, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct intel_display *display = to_intel_display(encoder); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_crtc *crtc; |
| u8 pipe_mask; |
| int ret; |
| |
| ret = drm_modeset_lock(&display->drm->mode_config.connection_mutex, |
| ctx); |
| if (ret) |
| return ret; |
| |
| ret = intel_dp_prep_phy_test(intel_dp, ctx, &pipe_mask); |
| if (ret) |
| return ret; |
| |
| if (pipe_mask == 0) |
| return 0; |
| |
| drm_dbg_kms(display->drm, "[ENCODER:%d:%s] PHY test\n", |
| encoder->base.base.id, encoder->base.name); |
| |
| for_each_intel_crtc_in_pipe_mask(display->drm, crtc, pipe_mask) { |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| /* test on the MST master transcoder */ |
| if (DISPLAY_VER(display) >= 12 && |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) && |
| !intel_dp_mst_is_master_trans(crtc_state)) |
| continue; |
| |
| intel_dp_process_phy_request(intel_dp, crtc_state); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| bool intel_dp_test_phy(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &dig_port->base; |
| struct drm_modeset_acquire_ctx ctx; |
| int ret; |
| |
| if (!intel_dp->compliance.test_active || |
| intel_dp->compliance.test_type != DP_TEST_LINK_PHY_TEST_PATTERN) |
| return false; |
| |
| drm_modeset_acquire_init(&ctx, 0); |
| |
| for (;;) { |
| ret = intel_dp_do_phy_test(encoder, &ctx); |
| |
| if (ret == -EDEADLK) { |
| drm_modeset_backoff(&ctx); |
| continue; |
| } |
| |
| break; |
| } |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| drm_WARN(encoder->base.dev, ret, |
| "Acquiring modeset locks failed with %i\n", ret); |
| |
| return true; |
| } |
| |
| bool intel_dp_test_short_pulse(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| bool reprobe_needed = false; |
| |
| switch (intel_dp->compliance.test_type) { |
| case DP_TEST_LINK_TRAINING: |
| drm_dbg_kms(display->drm, |
| "Link Training Compliance Test requested\n"); |
| /* Send a Hotplug Uevent to userspace to start modeset */ |
| drm_kms_helper_hotplug_event(display->drm); |
| break; |
| case DP_TEST_LINK_PHY_TEST_PATTERN: |
| drm_dbg_kms(display->drm, |
| "PHY test pattern Compliance Test requested\n"); |
| /* |
| * Schedule long hpd to do the test |
| * |
| * FIXME get rid of the ad-hoc phy test modeset code |
| * and properly incorporate it into the normal modeset. |
| */ |
| reprobe_needed = true; |
| } |
| |
| return reprobe_needed; |
| } |
| |
| static ssize_t i915_displayport_test_active_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_display *display = m->private; |
| char *input_buffer; |
| int status = 0; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| int val = 0; |
| |
| if (len == 0) |
| return 0; |
| |
| input_buffer = memdup_user_nul(ubuf, len); |
| if (IS_ERR(input_buffer)) |
| return PTR_ERR(input_buffer); |
| |
| drm_dbg_kms(display->drm, "Copied %d bytes from user\n", (unsigned int)len); |
| |
| drm_connector_list_iter_begin(display->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| status = kstrtoint(input_buffer, 10, &val); |
| if (status < 0) |
| break; |
| drm_dbg_kms(display->drm, "Got %d for test active\n", val); |
| /* To prevent erroneous activation of the compliance |
| * testing code, only accept an actual value of 1 here |
| */ |
| if (val == 1) |
| intel_dp->compliance.test_active = true; |
| else |
| intel_dp->compliance.test_active = false; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| kfree(input_buffer); |
| if (status < 0) |
| return status; |
| |
| *offp += len; |
| return len; |
| } |
| |
| static int i915_displayport_test_active_show(struct seq_file *m, void *data) |
| { |
| struct intel_display *display = m->private; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| |
| drm_connector_list_iter_begin(display->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| if (intel_dp->compliance.test_active) |
| seq_puts(m, "1"); |
| else |
| seq_puts(m, "0"); |
| } else { |
| seq_puts(m, "0"); |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return 0; |
| } |
| |
| static int i915_displayport_test_active_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, i915_displayport_test_active_show, |
| inode->i_private); |
| } |
| |
| static const struct file_operations i915_displayport_test_active_fops = { |
| .owner = THIS_MODULE, |
| .open = i915_displayport_test_active_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = i915_displayport_test_active_write |
| }; |
| |
| static int i915_displayport_test_data_show(struct seq_file *m, void *data) |
| { |
| struct intel_display *display = m->private; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| |
| drm_connector_list_iter_begin(display->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| if (intel_dp->compliance.test_type == |
| DP_TEST_LINK_EDID_READ) |
| seq_printf(m, "%lx", |
| intel_dp->compliance.test_data.edid); |
| else if (intel_dp->compliance.test_type == |
| DP_TEST_LINK_VIDEO_PATTERN) { |
| seq_printf(m, "hdisplay: %d\n", |
| intel_dp->compliance.test_data.hdisplay); |
| seq_printf(m, "vdisplay: %d\n", |
| intel_dp->compliance.test_data.vdisplay); |
| seq_printf(m, "bpc: %u\n", |
| intel_dp->compliance.test_data.bpc); |
| } else if (intel_dp->compliance.test_type == |
| DP_TEST_LINK_PHY_TEST_PATTERN) { |
| seq_printf(m, "pattern: %d\n", |
| intel_dp->compliance.test_data.phytest.phy_pattern); |
| seq_printf(m, "Number of lanes: %d\n", |
| intel_dp->compliance.test_data.phytest.num_lanes); |
| seq_printf(m, "Link Rate: %d\n", |
| intel_dp->compliance.test_data.phytest.link_rate); |
| seq_printf(m, "level: %02x\n", |
| intel_dp->train_set[0]); |
| } |
| } else { |
| seq_puts(m, "0"); |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_displayport_test_data); |
| |
| static int i915_displayport_test_type_show(struct seq_file *m, void *data) |
| { |
| struct intel_display *display = m->private; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| |
| drm_connector_list_iter_begin(display->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| seq_printf(m, "%02lx\n", intel_dp->compliance.test_type); |
| } else { |
| seq_puts(m, "0"); |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_displayport_test_type); |
| |
| static const struct { |
| const char *name; |
| const struct file_operations *fops; |
| } intel_display_debugfs_files[] = { |
| {"i915_dp_test_data", &i915_displayport_test_data_fops}, |
| {"i915_dp_test_type", &i915_displayport_test_type_fops}, |
| {"i915_dp_test_active", &i915_displayport_test_active_fops}, |
| }; |
| |
| void intel_dp_test_debugfs_register(struct intel_display *display) |
| { |
| struct drm_minor *minor = display->drm->primary; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(intel_display_debugfs_files); i++) { |
| debugfs_create_file(intel_display_debugfs_files[i].name, |
| 0644, |
| minor->debugfs_root, |
| display, |
| intel_display_debugfs_files[i].fops); |
| } |
| } |