Google Git
Sign in
gbmc / linux / ae6bd7f9b46a29af52ebfac25d395757e2031d0d / . / sound / pci / emu10k1 / emu10k1_main.c
blob: de5c41e578e1f4ac3cf085f1c8b20c75a545fce8 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) by Jaroslav Kysela <perex@perex.cz>
* James Courtier-Dutton <James@superbug.co.uk>
* Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
* Creative Labs, Inc.
*
* Routines for control of EMU10K1 chips
*/
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/iommu.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/emu10k1.h>
#include <linux/firmware.h>
#include "p16v.h"
#include "tina2.h"
#include "p17v.h"
#define HANA_FILENAME "emu/hana.fw"
#define DOCK_FILENAME "emu/audio_dock.fw"
#define EMU1010B_FILENAME "emu/emu1010b.fw"
#define MICRO_DOCK_FILENAME "emu/micro_dock.fw"
#define EMU0404_FILENAME "emu/emu0404.fw"
#define EMU1010_NOTEBOOK_FILENAME "emu/emu1010_notebook.fw"
MODULE_FIRMWARE(HANA_FILENAME);
MODULE_FIRMWARE(DOCK_FILENAME);
MODULE_FIRMWARE(EMU1010B_FILENAME);
MODULE_FIRMWARE(MICRO_DOCK_FILENAME);
MODULE_FIRMWARE(EMU0404_FILENAME);
MODULE_FIRMWARE(EMU1010_NOTEBOOK_FILENAME);
/*************************************************************************
* EMU10K1 init / done
*************************************************************************/
void snd_emu10k1_voice_init(struct snd_emu10k1 *emu, int ch)
{
snd_emu10k1_ptr_write_multiple(emu, ch,
DCYSUSV, 0,
VTFT, VTFT_FILTERTARGET_MASK,
CVCF, CVCF_CURRENTFILTER_MASK,
PTRX, 0,
CPF, 0,
CCR, 0,
PSST, 0,
DSL, 0x10,
CCCA, 0,
Z1, 0,
Z2, 0,
FXRT, 0x32100000,
// The rest is meaningless as long as DCYSUSV_CHANNELENABLE_MASK is zero
DCYSUSM, 0,
ATKHLDV, 0,
ATKHLDM, 0,
IP, 0,
IFATN, IFATN_FILTERCUTOFF_MASK | IFATN_ATTENUATION_MASK,
PEFE, 0,
FMMOD, 0,
TREMFRQ, 24, /* 1 Hz */
FM2FRQ2, 24, /* 1 Hz */
LFOVAL2, 0,
LFOVAL1, 0,
ENVVOL, 0,
ENVVAL, 0,
REGLIST_END);
/* Audigy extra stuffs */
if (emu->audigy) {
snd_emu10k1_ptr_write_multiple(emu, ch,
A_CSBA, 0,
A_CSDC, 0,
A_CSFE, 0,
A_CSHG, 0,
A_FXRT1, 0x03020100,
A_FXRT2, 0x07060504,
A_SENDAMOUNTS, 0,
REGLIST_END);
}
}
static const unsigned int spi_dac_init[] = {
0x00ff,
0x02ff,
0x0400,
0x0520,
0x0600,
0x08ff,
0x0aff,
0x0cff,
0x0eff,
0x10ff,
0x1200,
0x1400,
0x1480,
0x1800,
0x1aff,
0x1cff,
0x1e00,
0x0530,
0x0602,
0x0622,
0x1400,
};
static const unsigned int i2c_adc_init[][2] = {
{ 0x17, 0x00 }, /* Reset */
{ 0x07, 0x00 }, /* Timeout */
{ 0x0b, 0x22 }, /* Interface control */
{ 0x0c, 0x22 }, /* Master mode control */
{ 0x0d, 0x08 }, /* Powerdown control */
{ 0x0e, 0xcf }, /* Attenuation Left 0x01 = -103dB, 0xff = 24dB */
{ 0x0f, 0xcf }, /* Attenuation Right 0.5dB steps */
{ 0x10, 0x7b }, /* ALC Control 1 */
{ 0x11, 0x00 }, /* ALC Control 2 */
{ 0x12, 0x32 }, /* ALC Control 3 */
{ 0x13, 0x00 }, /* Noise gate control */
{ 0x14, 0xa6 }, /* Limiter control */
{ 0x15, ADC_MUX_2 }, /* ADC Mixer control. Mic for A2ZS Notebook */
};
static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir)
{
unsigned int silent_page;
int ch;
u32 tmp;
/* disable audio and lock cache */
outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK |
HCFG_MUTEBUTTONENABLE, emu->port + HCFG);
outl(0, emu->port + INTE);
snd_emu10k1_ptr_write_multiple(emu, 0,
/* reset recording buffers */
MICBS, ADCBS_BUFSIZE_NONE,
MICBA, 0,
FXBS, ADCBS_BUFSIZE_NONE,
FXBA, 0,
ADCBS, ADCBS_BUFSIZE_NONE,
ADCBA, 0,
/* disable channel interrupt */
CLIEL, 0,
CLIEH, 0,
/* disable stop on loop end */
SOLEL, 0,
SOLEH, 0,
REGLIST_END);
if (emu->audigy) {
/* set SPDIF bypass mode */
snd_emu10k1_ptr_write(emu, SPBYPASS, 0, SPBYPASS_FORMAT);
/* enable rear left + rear right AC97 slots */
snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_REAR_RIGHT |
AC97SLOT_REAR_LEFT);
}
/* init envelope engine */
for (ch = 0; ch < NUM_G; ch++)
snd_emu10k1_voice_init(emu, ch);
snd_emu10k1_ptr_write_multiple(emu, 0,
SPCS0, emu->spdif_bits[0],
SPCS1, emu->spdif_bits[1],
SPCS2, emu->spdif_bits[2],
REGLIST_END);
if (emu->card_capabilities->emu_model) {
} else if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
/* Hacks for Alice3 to work independent of haP16V driver */
/* Setup SRCMulti_I2S SamplingRate */
snd_emu10k1_ptr_write(emu, A_I2S_CAPTURE_RATE, 0, A_I2S_CAPTURE_96000);
/* Setup SRCSel (Enable Spdif,I2S SRCMulti) */
snd_emu10k1_ptr20_write(emu, SRCSel, 0, 0x14);
/* Setup SRCMulti Input Audio Enable */
/* Use 0xFFFFFFFF to enable P16V sounds. */
snd_emu10k1_ptr20_write(emu, SRCMULTI_ENABLE, 0, 0xFFFFFFFF);
/* Enabled Phased (8-channel) P16V playback */
outl(0x0201, emu->port + HCFG2);
/* Set playback routing. */
snd_emu10k1_ptr20_write(emu, CAPTURE_P16V_SOURCE, 0, 0x78e4);
} else if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
/* Hacks for Alice3 to work independent of haP16V driver */
dev_info(emu->card->dev, "Audigy2 value: Special config.\n");
/* Setup SRCMulti_I2S SamplingRate */
snd_emu10k1_ptr_write(emu, A_I2S_CAPTURE_RATE, 0, A_I2S_CAPTURE_96000);
/* Setup SRCSel (Enable Spdif,I2S SRCMulti) */
snd_emu10k1_ptr20_write(emu, P17V_SRCSel, 0, 0x14);
/* Setup SRCMulti Input Audio Enable */
snd_emu10k1_ptr20_write(emu, P17V_MIXER_I2S_ENABLE, 0, 0xFF000000);
/* Setup SPDIF Out Audio Enable */
/* The Audigy 2 Value has a separate SPDIF out,
* so no need for a mixer switch
*/
snd_emu10k1_ptr20_write(emu, P17V_MIXER_SPDIF_ENABLE, 0, 0xFF000000);
tmp = inw(emu->port + A_IOCFG) & ~0x8; /* Clear bit 3 */
outw(tmp, emu->port + A_IOCFG);
}
if (emu->card_capabilities->spi_dac) { /* Audigy 2 ZS Notebook with DAC Wolfson WM8768/WM8568 */
int size, n;
size = ARRAY_SIZE(spi_dac_init);
for (n = 0; n < size; n++)
snd_emu10k1_spi_write(emu, spi_dac_init[n]);
snd_emu10k1_ptr20_write(emu, 0x60, 0, 0x10);
/* Enable GPIOs
* GPIO0: Unknown
* GPIO1: Speakers-enabled.
* GPIO2: Unknown
* GPIO3: Unknown
* GPIO4: IEC958 Output on.
* GPIO5: Unknown
* GPIO6: Unknown
* GPIO7: Unknown
*/
outw(0x76, emu->port + A_IOCFG); /* Windows uses 0x3f76 */
}
if (emu->card_capabilities->i2c_adc) { /* Audigy 2 ZS Notebook with ADC Wolfson WM8775 */
int size, n;
snd_emu10k1_ptr20_write(emu, P17V_I2S_SRC_SEL, 0, 0x2020205f);
tmp = inw(emu->port + A_IOCFG);
outw(tmp | 0x4, emu->port + A_IOCFG); /* Set bit 2 for mic input */
tmp = inw(emu->port + A_IOCFG);
size = ARRAY_SIZE(i2c_adc_init);
for (n = 0; n < size; n++)
snd_emu10k1_i2c_write(emu, i2c_adc_init[n][0], i2c_adc_init[n][1]);
for (n = 0; n < 4; n++) {
emu->i2c_capture_volume[n][0] = 0xcf;
emu->i2c_capture_volume[n][1] = 0xcf;
}
}
snd_emu10k1_ptr_write(emu, PTB, 0, emu->ptb_pages.addr);
snd_emu10k1_ptr_write(emu, TCB, 0, 0); /* taken from original driver */
snd_emu10k1_ptr_write(emu, TCBS, 0, TCBS_BUFFSIZE_256K); /* taken from original driver */
silent_page = (emu->silent_page.addr << emu->address_mode) | (emu->address_mode ? MAP_PTI_MASK1 : MAP_PTI_MASK0);
for (ch = 0; ch < NUM_G; ch++) {
snd_emu10k1_ptr_write(emu, MAPA, ch, silent_page);
snd_emu10k1_ptr_write(emu, MAPB, ch, silent_page);
}
if (emu->card_capabilities->emu_model) {
outl(HCFG_AUTOMUTE_ASYNC |
HCFG_EMU32_SLAVE |
HCFG_AUDIOENABLE, emu->port + HCFG);
/*
* Hokay, setup HCFG
* Mute Disable Audio = 0
* Lock Tank Memory = 1
* Lock Sound Memory = 0
* Auto Mute = 1
*/
} else if (emu->audigy) {
if (emu->revision == 4) /* audigy2 */
outl(HCFG_AUDIOENABLE |
HCFG_AC3ENABLE_CDSPDIF |
HCFG_AC3ENABLE_GPSPDIF |
HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
else
outl(HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
/* FIXME: Remove all these emu->model and replace it with a card recognition parameter,
* e.g. card_capabilities->joystick */
} else if (emu->model == 0x20 ||
emu->model == 0xc400 ||
(emu->model == 0x21 && emu->revision < 6))
outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE, emu->port + HCFG);
else
/* With on-chip joystick */
outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
if (enable_ir) { /* enable IR for SB Live */
if (emu->card_capabilities->emu_model) {
; /* Disable all access to A_IOCFG for the emu1010 */
} else if (emu->card_capabilities->i2c_adc) {
; /* Disable A_IOCFG for Audigy 2 ZS Notebook */
} else if (emu->audigy) {
u16 reg = inw(emu->port + A_IOCFG);
outw(reg | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
udelay(500);
outw(reg | A_IOCFG_GPOUT1 | A_IOCFG_GPOUT2, emu->port + A_IOCFG);
udelay(100);
outw(reg, emu->port + A_IOCFG);
} else {
unsigned int reg = inl(emu->port + HCFG);
outl(reg | HCFG_GPOUT2, emu->port + HCFG);
udelay(500);
outl(reg | HCFG_GPOUT1 | HCFG_GPOUT2, emu->port + HCFG);
udelay(100);
outl(reg, emu->port + HCFG);
}
}
if (emu->card_capabilities->emu_model) {
; /* Disable all access to A_IOCFG for the emu1010 */
} else if (emu->card_capabilities->i2c_adc) {
; /* Disable A_IOCFG for Audigy 2 ZS Notebook */
} else if (emu->audigy) { /* enable analog output */
u16 reg = inw(emu->port + A_IOCFG);
outw(reg | A_IOCFG_GPOUT0, emu->port + A_IOCFG);
}
if (emu->address_mode == 0) {
/* use 16M in 4G */
outl(inl(emu->port + HCFG) | HCFG_EXPANDED_MEM, emu->port + HCFG);
}
return 0;
}
static void snd_emu10k1_audio_enable(struct snd_emu10k1 *emu)
{
/*
* Enable the audio bit
*/
outl(inl(emu->port + HCFG) | HCFG_AUDIOENABLE, emu->port + HCFG);
/* Enable analog/digital outs on audigy */
if (emu->card_capabilities->emu_model) {
; /* Disable all access to A_IOCFG for the emu1010 */
} else if (emu->card_capabilities->i2c_adc) {
; /* Disable A_IOCFG for Audigy 2 ZS Notebook */
} else if (emu->audigy) {
outw(inw(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG);
if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
/* Unmute Analog now. Set GPO6 to 1 for Apollo.
* This has to be done after init ALice3 I2SOut beyond 48KHz.
* So, sequence is important. */
outw(inw(emu->port + A_IOCFG) | 0x0040, emu->port + A_IOCFG);
} else if (emu->card_capabilities->ca0108_chip) { /* audigy2 value */
/* Unmute Analog now. */
outw(inw(emu->port + A_IOCFG) | 0x0060, emu->port + A_IOCFG);
} else {
/* Disable routing from AC97 line out to Front speakers */
outw(inw(emu->port + A_IOCFG) | 0x0080, emu->port + A_IOCFG);
}
}
#if 0
{
unsigned int tmp;
/* FIXME: the following routine disables LiveDrive-II !! */
/* TOSLink detection */
emu->tos_link = 0;
tmp = inl(emu->port + HCFG);
if (tmp & (HCFG_GPINPUT0 | HCFG_GPINPUT1)) {
outl(tmp|0x800, emu->port + HCFG);
udelay(50);
if (tmp != (inl(emu->port + HCFG) & ~0x800)) {
emu->tos_link = 1;
outl(tmp, emu->port + HCFG);
}
}
}
#endif
if (emu->card_capabilities->emu_model)
snd_emu10k1_intr_enable(emu, INTE_PCIERRORENABLE | INTE_A_GPIOENABLE);
else
snd_emu10k1_intr_enable(emu, INTE_PCIERRORENABLE);
}
int snd_emu10k1_done(struct snd_emu10k1 *emu)
{
int ch;
outl(0, emu->port + INTE);
/*
* Shutdown the voices
*/
for (ch = 0; ch < NUM_G; ch++) {
snd_emu10k1_ptr_write_multiple(emu, ch,
DCYSUSV, 0,
VTFT, 0,
CVCF, 0,
PTRX, 0,
CPF, 0,
REGLIST_END);
}
// stop the DSP
if (emu->audigy)
snd_emu10k1_ptr_write(emu, A_DBG, 0, A_DBG_SINGLE_STEP);
else
snd_emu10k1_ptr_write(emu, DBG, 0, EMU10K1_DBG_SINGLE_STEP);
snd_emu10k1_ptr_write_multiple(emu, 0,
/* reset recording buffers */
MICBS, 0,
MICBA, 0,
FXBS, 0,
FXBA, 0,
FXWC, 0,
ADCBS, ADCBS_BUFSIZE_NONE,
ADCBA, 0,
TCBS, TCBS_BUFFSIZE_16K,
TCB, 0,
/* disable channel interrupt */
CLIEL, 0,
CLIEH, 0,
SOLEL, 0,
SOLEH, 0,
PTB, 0,
REGLIST_END);
/* disable audio and lock cache */
outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE, emu->port + HCFG);
return 0;
}
/*************************************************************************
* ECARD functional implementation
*************************************************************************/
/* In A1 Silicon, these bits are in the HC register */
#define HOOKN_BIT (1L << 12)
#define HANDN_BIT (1L << 11)
#define PULSEN_BIT (1L << 10)
#define EC_GDI1 (1 << 13)
#define EC_GDI0 (1 << 14)
#define EC_NUM_CONTROL_BITS 20
#define EC_AC3_DATA_SELN 0x0001L
#define EC_EE_DATA_SEL 0x0002L
#define EC_EE_CNTRL_SELN 0x0004L
#define EC_EECLK 0x0008L
#define EC_EECS 0x0010L
#define EC_EESDO 0x0020L
#define EC_TRIM_CSN 0x0040L
#define EC_TRIM_SCLK 0x0080L
#define EC_TRIM_SDATA 0x0100L
#define EC_TRIM_MUTEN 0x0200L
#define EC_ADCCAL 0x0400L
#define EC_ADCRSTN 0x0800L
#define EC_DACCAL 0x1000L
#define EC_DACMUTEN 0x2000L
#define EC_LEDN 0x4000L
#define EC_SPDIF0_SEL_SHIFT 15
#define EC_SPDIF1_SEL_SHIFT 17
#define EC_SPDIF0_SEL_MASK (0x3L << EC_SPDIF0_SEL_SHIFT)
#define EC_SPDIF1_SEL_MASK (0x7L << EC_SPDIF1_SEL_SHIFT)
#define EC_SPDIF0_SELECT(_x) (((_x) << EC_SPDIF0_SEL_SHIFT) & EC_SPDIF0_SEL_MASK)
#define EC_SPDIF1_SELECT(_x) (((_x) << EC_SPDIF1_SEL_SHIFT) & EC_SPDIF1_SEL_MASK)
#define EC_CURRENT_PROM_VERSION 0x01 /* Self-explanatory. This should
* be incremented any time the EEPROM's
* format is changed. */
#define EC_EEPROM_SIZE 0x40 /* ECARD EEPROM has 64 16-bit words */
/* Addresses for special values stored in to EEPROM */
#define EC_PROM_VERSION_ADDR 0x20 /* Address of the current prom version */
#define EC_BOARDREV0_ADDR 0x21 /* LSW of board rev */
#define EC_BOARDREV1_ADDR 0x22 /* MSW of board rev */
#define EC_LAST_PROMFILE_ADDR 0x2f
#define EC_SERIALNUM_ADDR 0x30 /* First word of serial number. The
* can be up to 30 characters in length
* and is stored as a NULL-terminated
* ASCII string. Any unused bytes must be
* filled with zeros */
#define EC_CHECKSUM_ADDR 0x3f /* Location at which checksum is stored */
/* Most of this stuff is pretty self-evident. According to the hardware
* dudes, we need to leave the ADCCAL bit low in order to avoid a DC
* offset problem. Weird.
*/
#define EC_RAW_RUN_MODE (EC_DACMUTEN | EC_ADCRSTN | EC_TRIM_MUTEN | \
EC_TRIM_CSN)
#define EC_DEFAULT_ADC_GAIN 0xC4C4
#define EC_DEFAULT_SPDIF0_SEL 0x0
#define EC_DEFAULT_SPDIF1_SEL 0x4
/**************************************************************************
* @func Clock bits into the Ecard's control latch. The Ecard uses a
* control latch will is loaded bit-serially by toggling the Modem control
* lines from function 2 on the E8010. This function hides these details
* and presents the illusion that we are actually writing to a distinct
* register.
*/
static void snd_emu10k1_ecard_write(struct snd_emu10k1 *emu, unsigned int value)
{
unsigned short count;
unsigned int data;
unsigned long hc_port;
unsigned int hc_value;
hc_port = emu->port + HCFG;
hc_value = inl(hc_port) & ~(HOOKN_BIT | HANDN_BIT | PULSEN_BIT);
outl(hc_value, hc_port);
for (count = 0; count < EC_NUM_CONTROL_BITS; count++) {
/* Set up the value */
data = ((value & 0x1) ? PULSEN_BIT : 0);
value >>= 1;
outl(hc_value | data, hc_port);
/* Clock the shift register */
outl(hc_value | data | HANDN_BIT, hc_port);
outl(hc_value | data, hc_port);
}
/* Latch the bits */
outl(hc_value | HOOKN_BIT, hc_port);
outl(hc_value, hc_port);
}
/**************************************************************************
* @func Set the gain of the ECARD's CS3310 Trim/gain controller. The
* trim value consists of a 16bit value which is composed of two
* 8 bit gain/trim values, one for the left channel and one for the
* right channel. The following table maps from the Gain/Attenuation
* value in decibels into the corresponding bit pattern for a single
* channel.
*/
static void snd_emu10k1_ecard_setadcgain(struct snd_emu10k1 *emu,
unsigned short gain)
{
unsigned int bit;
/* Enable writing to the TRIM registers */
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN);
/* Do it again to insure that we meet hold time requirements */
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl & ~EC_TRIM_CSN);
for (bit = (1 << 15); bit; bit >>= 1) {
unsigned int value;
value = emu->ecard_ctrl & ~(EC_TRIM_CSN | EC_TRIM_SDATA);
if (gain & bit)
value |= EC_TRIM_SDATA;
/* Clock the bit */
snd_emu10k1_ecard_write(emu, value);
snd_emu10k1_ecard_write(emu, value | EC_TRIM_SCLK);
snd_emu10k1_ecard_write(emu, value);
}
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
}
static int snd_emu10k1_ecard_init(struct snd_emu10k1 *emu)
{
unsigned int hc_value;
/* Set up the initial settings */
emu->ecard_ctrl = EC_RAW_RUN_MODE |
EC_SPDIF0_SELECT(EC_DEFAULT_SPDIF0_SEL) |
EC_SPDIF1_SELECT(EC_DEFAULT_SPDIF1_SEL);
/* Step 0: Set the codec type in the hardware control register
* and enable audio output */
hc_value = inl(emu->port + HCFG);
outl(hc_value | HCFG_AUDIOENABLE | HCFG_CODECFORMAT_I2S, emu->port + HCFG);
inl(emu->port + HCFG);
/* Step 1: Turn off the led and deassert TRIM_CS */
snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN);
/* Step 2: Calibrate the ADC and DAC */
snd_emu10k1_ecard_write(emu, EC_DACCAL | EC_LEDN | EC_TRIM_CSN);
/* Step 3: Wait for awhile; XXX We can't get away with this
* under a real operating system; we'll need to block and wait that
* way. */
snd_emu10k1_wait(emu, 48000);
/* Step 4: Switch off the DAC and ADC calibration. Note
* That ADC_CAL is actually an inverted signal, so we assert
* it here to stop calibration. */
snd_emu10k1_ecard_write(emu, EC_ADCCAL | EC_LEDN | EC_TRIM_CSN);
/* Step 4: Switch into run mode */
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
/* Step 5: Set the analog input gain */
snd_emu10k1_ecard_setadcgain(emu, EC_DEFAULT_ADC_GAIN);
return 0;
}
static int snd_emu10k1_cardbus_init(struct snd_emu10k1 *emu)
{
unsigned long special_port;
__always_unused unsigned int value;
/* Special initialisation routine
* before the rest of the IO-Ports become active.
*/
special_port = emu->port + 0x38;
value = inl(special_port);
outl(0x00d00000, special_port);
value = inl(special_port);
outl(0x00d00001, special_port);
value = inl(special_port);
outl(0x00d0005f, special_port);
value = inl(special_port);
outl(0x00d0007f, special_port);
value = inl(special_port);
outl(0x0090007f, special_port);
value = inl(special_port);
snd_emu10k1_ptr20_write(emu, TINA2_VOLUME, 0, 0xfefefefe); /* Defaults to 0x30303030 */
/* Delay to give time for ADC chip to switch on. It needs 113ms */
msleep(200);
return 0;
}
static int snd_emu1010_load_firmware_entry(struct snd_emu10k1 *emu,
const struct firmware *fw_entry)
{
int n, i;
u16 reg;
u8 value;
__always_unused u16 write_post;
if (!fw_entry)
return -EIO;
/* The FPGA is a Xilinx Spartan IIE XC2S50E */
/* On E-MU 0404b it is a Xilinx Spartan III XC3S50 */
/* GPIO7 -> FPGA PGMN
* GPIO6 -> FPGA CCLK
* GPIO5 -> FPGA DIN
* FPGA CONFIG OFF -> FPGA PGMN
*/
spin_lock_irq(&emu->emu_lock);
outw(0x00, emu->port + A_GPIO); /* Set PGMN low for 100uS. */
write_post = inw(emu->port + A_GPIO);
udelay(100);
outw(0x80, emu->port + A_GPIO); /* Leave bit 7 set during netlist setup. */
write_post = inw(emu->port + A_GPIO);
udelay(100); /* Allow FPGA memory to clean */
for (n = 0; n < fw_entry->size; n++) {
value = fw_entry->data[n];
for (i = 0; i < 8; i++) {
reg = 0x80;
if (value & 0x1)
reg = reg | 0x20;
value = value >> 1;
outw(reg, emu->port + A_GPIO);
write_post = inw(emu->port + A_GPIO);
outw(reg | 0x40, emu->port + A_GPIO);
write_post = inw(emu->port + A_GPIO);
}
}
/* After programming, set GPIO bit 4 high again. */
outw(0x10, emu->port + A_GPIO);
write_post = inw(emu->port + A_GPIO);
spin_unlock_irq(&emu->emu_lock);
return 0;
}
/* firmware file names, per model, init-fw and dock-fw (optional) */
static const char * const firmware_names[5][2] = {
[EMU_MODEL_EMU1010] = {
HANA_FILENAME, DOCK_FILENAME
},
[EMU_MODEL_EMU1010B] = {
EMU1010B_FILENAME, MICRO_DOCK_FILENAME
},
[EMU_MODEL_EMU1616] = {
EMU1010_NOTEBOOK_FILENAME, MICRO_DOCK_FILENAME
},
[EMU_MODEL_EMU0404] = {
EMU0404_FILENAME, NULL
},
};
static int snd_emu1010_load_firmware(struct snd_emu10k1 *emu, int dock,
const struct firmware **fw)
{
const char *filename;
int err;
if (!*fw) {
filename = firmware_names[emu->card_capabilities->emu_model][dock];
if (!filename)
return 0;
err = request_firmware(fw, filename, &emu->pci->dev);
if (err)
return err;
}
return snd_emu1010_load_firmware_entry(emu, *fw);
}
static void emu1010_firmware_work(struct work_struct *work)
{
struct snd_emu10k1 *emu;
u32 tmp, tmp2, reg;
int err;
emu = container_of(work, struct snd_emu10k1,
emu1010.firmware_work);
if (emu->card->shutdown)
return;
#ifdef CONFIG_PM_SLEEP
if (emu->suspend)
return;
#endif
snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg); /* OPTIONS: Which cards are attached to the EMU */
if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) {
/* Audio Dock attached */
/* Return to Audio Dock programming mode */
dev_info(emu->card->dev,
"emu1010: Loading Audio Dock Firmware\n");
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG,
EMU_HANA_FPGA_CONFIG_AUDIODOCK);
err = snd_emu1010_load_firmware(emu, 1, &emu->dock_fw);
if (err < 0)
return;
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0);
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &tmp);
dev_info(emu->card->dev,
"emu1010: EMU_HANA+DOCK_ID = 0x%x\n", tmp);
if ((tmp & 0x1f) != 0x15) {
/* FPGA failed to be programmed */
dev_info(emu->card->dev,
"emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n",
tmp);
return;
}
dev_info(emu->card->dev,
"emu1010: Audio Dock Firmware loaded\n");
snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp);
snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2);
dev_info(emu->card->dev, "Audio Dock ver: %u.%u\n", tmp, tmp2);
/* Sync clocking between 1010 and Dock */
/* Allow DLL to settle */
msleep(10);
/* Unmute all. Default is muted after a firmware load */
snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
}
}
static void emu1010_clock_work(struct work_struct *work)
{
struct snd_emu10k1 *emu;
struct snd_ctl_elem_id id;
emu = container_of(work, struct snd_emu10k1,
emu1010.clock_work);
if (emu->card->shutdown)
return;
#ifdef CONFIG_PM_SLEEP
if (emu->suspend)
return;
#endif
spin_lock_irq(&emu->reg_lock);
// This is the only thing that can actually happen.
emu->emu1010.clock_source = emu->emu1010.clock_fallback;
emu->emu1010.wclock = 1 - emu->emu1010.clock_source;
snd_emu1010_update_clock(emu);
spin_unlock_irq(&emu->reg_lock);
snd_ctl_build_ioff(&id, emu->ctl_clock_source, 0);
snd_ctl_notify(emu->card, SNDRV_CTL_EVENT_MASK_VALUE, &id);
}
static void emu1010_interrupt(struct snd_emu10k1 *emu)
{
u32 sts;
snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &sts);
if (sts & EMU_HANA_IRQ_DOCK_LOST) {
/* Audio Dock removed */
dev_info(emu->card->dev, "emu1010: Audio Dock detached\n");
/* The hardware auto-mutes all, so we unmute again */
snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
} else if (sts & EMU_HANA_IRQ_DOCK) {
schedule_work(&emu->emu1010.firmware_work);
}
if (sts & EMU_HANA_IRQ_WCLK_CHANGED)
schedule_work(&emu->emu1010.clock_work);
}
/*
* Current status of the driver:
* ----------------------------
* * only 44.1/48kHz supported (the MS Win driver supports up to 192 kHz)
* * PCM device nb. 2:
* 16 x 16-bit playback - snd_emu10k1_fx8010_playback_ops
* 16 x 32-bit capture - snd_emu10k1_capture_efx_ops
*/
static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
{
u32 tmp, tmp2, reg;
int err;
dev_info(emu->card->dev, "emu1010: Special config.\n");
/* Mute, and disable audio and lock cache, just in case.
* Proper init follows in snd_emu10k1_init(). */
outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK, emu->port + HCFG);
/* Disable 48Volt power to Audio Dock */
snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0);
/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
dev_dbg(emu->card->dev, "reg1 = 0x%x\n", reg);
if ((reg & 0x3f) == 0x15) {
/* FPGA netlist already present so clear it */
/* Return to programming mode */
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_HANA);
}
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
dev_dbg(emu->card->dev, "reg2 = 0x%x\n", reg);
if ((reg & 0x3f) == 0x15) {
/* FPGA failed to return to programming mode */
dev_info(emu->card->dev,
"emu1010: FPGA failed to return to programming mode\n");
return -ENODEV;
}
dev_info(emu->card->dev, "emu1010: EMU_HANA_ID = 0x%x\n", reg);
err = snd_emu1010_load_firmware(emu, 0, &emu->firmware);
if (err < 0) {
dev_info(emu->card->dev, "emu1010: Loading Firmware failed\n");
return err;
}
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, &reg);
if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
dev_info(emu->card->dev,
"emu1010: Loading Hana Firmware file failed, reg = 0x%x\n",
reg);
return -ENODEV;
}
dev_info(emu->card->dev, "emu1010: Hana Firmware loaded\n");
snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp);
snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2);
dev_info(emu->card->dev, "emu1010: Hana version: %u.%u\n", tmp, tmp2);
/* Enable 48Volt power to Audio Dock */
snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON);
snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &reg);
dev_info(emu->card->dev, "emu1010: Card options = 0x%x\n", reg);
if (reg & EMU_HANA_OPTION_DOCK_OFFLINE)
schedule_work(&emu->emu1010.firmware_work);
if (emu->card_capabilities->no_adat) {
emu->emu1010.optical_in = 0; /* IN_SPDIF */
emu->emu1010.optical_out = 0; /* OUT_SPDIF */
} else {
/* Optical -> ADAT I/O */
emu->emu1010.optical_in = 1; /* IN_ADAT */
emu->emu1010.optical_out = 1; /* OUT_ADAT */
}
tmp = (emu->emu1010.optical_in ? EMU_HANA_OPTICAL_IN_ADAT : EMU_HANA_OPTICAL_IN_SPDIF) |
(emu->emu1010.optical_out ? EMU_HANA_OPTICAL_OUT_ADAT : EMU_HANA_OPTICAL_OUT_SPDIF);
snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, tmp);
/* Set no attenuation on Audio Dock pads. */
emu->emu1010.adc_pads = 0x00;
snd_emu1010_fpga_write(emu, EMU_HANA_ADC_PADS, emu->emu1010.adc_pads);
/* Unmute Audio dock DACs, Headphone source DAC-4. */
snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_MISC, EMU_HANA_DOCK_PHONES_192_DAC4);
/* DAC PADs. */
emu->emu1010.dac_pads = EMU_HANA_DOCK_DAC_PAD1 | EMU_HANA_DOCK_DAC_PAD2 |
EMU_HANA_DOCK_DAC_PAD3 | EMU_HANA_DOCK_DAC_PAD4;
snd_emu1010_fpga_write(emu, EMU_HANA_DAC_PADS, emu->emu1010.dac_pads);
/* SPDIF Format. Set Consumer mode, 24bit, copy enable */
snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, EMU_HANA_SPDIF_MODE_RX_INVALID);
/* MIDI routing */
snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, EMU_HANA_MIDI_INA_FROM_HAMOA | EMU_HANA_MIDI_INB_FROM_DOCK2);
snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, EMU_HANA_MIDI_OUT_DOCK2 | EMU_HANA_MIDI_OUT_SYNC2);
emu->gpio_interrupt = emu1010_interrupt;
// Note: The Audigy INTE is set later
snd_emu1010_fpga_write(emu, EMU_HANA_IRQ_ENABLE,
EMU_HANA_IRQ_DOCK | EMU_HANA_IRQ_DOCK_LOST | EMU_HANA_IRQ_WCLK_CHANGED);
snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &reg); // Clear pending IRQs
emu->emu1010.clock_source = 1; /* 48000 */
emu->emu1010.clock_fallback = 1; /* 48000 */
/* Default WCLK set to 48kHz. */
snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, EMU_HANA_DEFCLOCK_48K);
/* Word Clock source, Internal 48kHz x1 */
emu->emu1010.wclock = EMU_HANA_WCLOCK_INT_48K;
snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K);
/* snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X); */
snd_emu1010_update_clock(emu);
// The routes are all set to EMU_SRC_SILENCE due to the reset,
// so it is safe to simply enable the outputs.
snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
return 0;
}
/*
* Create the EMU10K1 instance
*/
#ifdef CONFIG_PM_SLEEP
static int alloc_pm_buffer(struct snd_emu10k1 *emu);
static void free_pm_buffer(struct snd_emu10k1 *emu);
#endif
static void snd_emu10k1_free(struct snd_card *card)
{
struct snd_emu10k1 *emu = card->private_data;
if (emu->port) { /* avoid access to already used hardware */
snd_emu10k1_fx8010_tram_setup(emu, 0);
snd_emu10k1_done(emu);
snd_emu10k1_free_efx(emu);
}
if (emu->card_capabilities->emu_model == EMU_MODEL_EMU1010) {
/* Disable 48Volt power to Audio Dock */
snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0);
}
cancel_work_sync(&emu->emu1010.firmware_work);
cancel_work_sync(&emu->emu1010.clock_work);
release_firmware(emu->firmware);
release_firmware(emu->dock_fw);
snd_util_memhdr_free(emu->memhdr);
if (emu->silent_page.area)
snd_dma_free_pages(&emu->silent_page);
if (emu->ptb_pages.area)
snd_dma_free_pages(&emu->ptb_pages);
vfree(emu->page_ptr_table);
vfree(emu->page_addr_table);
#ifdef CONFIG_PM_SLEEP
free_pm_buffer(emu);
#endif
}
static const struct snd_emu_chip_details emu_chip_details[] = {
/* Audigy 5/Rx SB1550 */
/* Tested by michael@gernoth.net 28 Mar 2015 */
/* DSP: CA10300-IAT LF
* DAC: Cirrus Logic CS4382-KQZ
* ADC: Philips 1361T
* AC97: Sigmatel STAC9750
* CA0151: None
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10241102,
.driver = "Audigy2", .name = "SB Audigy 5/Rx [SB1550]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit */
.ac97_chip = 1},
/* Audigy4 (Not PRO) SB0610 */
/* Tested by James@superbug.co.uk 4th April 2006 */
/* A_IOCFG bits
* Output
* 0: ?
* 1: ?
* 2: ?
* 3: 0 - Digital Out, 1 - Line in
* 4: ?
* 5: ?
* 6: ?
* 7: ?
* Input
* 8: ?
* 9: ?
* A: Green jack sense (Front)
* B: ?
* C: Black jack sense (Rear/Side Right)
* D: Yellow jack sense (Center/LFE/Side Left)
* E: ?
* F: ?
*
* Digital Out/Line in switch using A_IOCFG bit 3 (0x08)
* 0 - Digital Out
* 1 - Line in
*/
/* Mic input not tested.
* Analog CD input not tested
* Digital Out not tested.
* Line in working.
* Audio output 5.1 working. Side outputs not working.
*/
/* DSP: CA10300-IAT LF
* DAC: Cirrus Logic CS4382-KQZ
* ADC: Philips 1361T
* AC97: Sigmatel STAC9750
* CA0151: None
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
.driver = "Audigy2", .name = "SB Audigy 4 [SB0610]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit */
.ac97_chip = 1} ,
/* Audigy 2 Value AC3 out does not work yet.
* Need to find out how to turn off interpolators.
*/
/* Tested by James@superbug.co.uk 3rd July 2005 */
/* DSP: CA0108-IAT
* DAC: CS4382-KQ
* ADC: Philips 1361T
* AC97: STAC9750
* CA0151: None
*/
/*
* A_IOCFG Input (GPIO)
* 0x400 = Front analog jack plugged in. (Green socket)
* 0x1000 = Rear analog jack plugged in. (Black socket)
* 0x2000 = Center/LFE analog jack plugged in. (Orange socket)
* A_IOCFG Output (GPIO)
* 0x60 = Sound out of front Left.
* Win sets it to 0xXX61
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
.driver = "Audigy2", .name = "SB Audigy 2 Value [SB0400]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.ac97_chip = 1} ,
/* Audigy 2 ZS Notebook Cardbus card.*/
/* Tested by James@superbug.co.uk 6th November 2006 */
/* Audio output 7.1/Headphones working.
* Digital output working. (AC3 not checked, only PCM)
* Audio Mic/Line inputs working.
* Digital input not tested.
*/
/* DSP: Tina2
* DAC: Wolfson WM8768/WM8568
* ADC: Wolfson WM8775
* AC97: None
* CA0151: None
*/
/* Tested by James@superbug.co.uk 4th April 2006 */
/* A_IOCFG bits
* Output
* 0: Not Used
* 1: 0 = Mute all the 7.1 channel out. 1 = unmute.
* 2: Analog input 0 = line in, 1 = mic in
* 3: Not Used
* 4: Digital output 0 = off, 1 = on.
* 5: Not Used
* 6: Not Used
* 7: Not Used
* Input
* All bits 1 (0x3fxx) means nothing plugged in.
* 8-9: 0 = Line in/Mic, 2 = Optical in, 3 = Nothing.
* A-B: 0 = Headphones, 2 = Optical out, 3 = Nothing.
* C-D: 2 = Front/Rear/etc, 3 = nothing.
* E-F: Always 0
*
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x20011102,
.driver = "Audigy2", .name = "Audigy 2 ZS Notebook [SB0530]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ca_cardbus_chip = 1,
.spi_dac = 1,
.i2c_adc = 1,
.spk71 = 1} ,
/* This is MAEM8950 "Mana" */
/* Attach MicroDock[M] to make it an E-MU 1616[m]. */
/* Does NOT support sync daughter card (obviously). */
/* Tested by James@superbug.co.uk 4th Nov 2007. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x42011102,
.driver = "Audigy2", .name = "E-MU 02 CardBus [MAEM8950]",
.id = "EMU1010",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ca_cardbus_chip = 1,
.spk71 = 1 ,
.emu_model = EMU_MODEL_EMU1616},
/* Tested by James@superbug.co.uk 4th Nov 2007. */
/* This is MAEM8960 "Hana3", 0202 is MAEM8980 */
/* Attach 0202 daughter card to make it an E-MU 1212m, OR a
* MicroDock[M] to make it an E-MU 1616[m]. */
/* Does NOT support sync daughter card. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102,
.driver = "Audigy2", .name = "E-MU 1010b PCI [MAEM8960]",
.id = "EMU1010",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */
/* Tested by Maxim Kachur <mcdebugger@duganet.ru> 17th Oct 2012. */
/* This is MAEM8986, 0202 is MAEM8980 */
/* Attach 0202 daughter card to make it an E-MU 1212m, OR a
* MicroDockM to make it an E-MU 1616m. The non-m
* version was never sold with this card, but should
* still work. */
/* Does NOT support sync daughter card. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102,
.driver = "Audigy2", .name = "E-MU 1010 PCIe [MAEM8986]",
.id = "EMU1010",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */
/* Tested by James@superbug.co.uk 8th July 2005. */
/* This is MAEM8810 "Hana", 0202 is MAEM8820 "Hamoa" */
/* Attach 0202 daughter card to make it an E-MU 1212m, OR an
* AudioDock[M] to make it an E-MU 1820[m]. */
/* Supports sync daughter card. */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
.driver = "Audigy2", .name = "E-MU 1010 [MAEM8810]",
.id = "EMU1010",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spk71 = 1,
.emu_model = EMU_MODEL_EMU1010}, /* EMU 1010 old revision */
/* This is MAEM8852 "HanaLiteLite" */
/* Supports sync daughter card. */
/* Tested by oswald.buddenhagen@gmx.de Mar 2023. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40021102,
.driver = "Audigy2", .name = "E-MU 0404b PCI [MAEM8852]",
.id = "EMU0404",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk20 = 1,
.no_adat = 1,
.emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 new revision */
/* This is MAEM8850 "HanaLite" */
/* Supports sync daughter card. */
/* Tested by James@superbug.co.uk 20-3-2007. */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40021102,
.driver = "Audigy2", .name = "E-MU 0404 [MAEM8850]",
.id = "EMU0404",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spk20 = 1,
.no_adat = 1,
.emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */
/* EMU0404 PCIe */
/* Does NOT support sync daughter card. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40051102,
.driver = "Audigy2", .name = "E-MU 0404 PCIe [MAEM8984]",
.id = "EMU0404",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk20 = 1,
.no_adat = 1,
.emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 PCIe ver_03 */
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "SB Audigy 2 Value [Unknown]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ac97_chip = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20071102,
.driver = "Audigy2", .name = "SB Audigy 4 PRO [SB0380]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
/* Tested by shane-alsa@cm.nu 5th Nov 2005 */
/* The 0x20061102 does have SB0350 written on it
* Just like 0x20021102
*/
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20061102,
.driver = "Audigy2", .name = "SB Audigy 2 [SB0350b]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
/* 0x20051102 also has SB0350 written on it, treated as Audigy 2 ZS by
Creative's Windows driver */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20051102,
.driver = "Audigy2", .name = "SB Audigy 2 ZS [SB0350a]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20021102,
.driver = "Audigy2", .name = "SB Audigy 2 ZS [SB0350]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20011102,
.driver = "Audigy2", .name = "SB Audigy 2 ZS [SB0360]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
/* Audigy 2 */
/* Tested by James@superbug.co.uk 3rd July 2005 */
/* DSP: CA0102-IAT
* DAC: CS4382-KQ
* ADC: Philips 1361T
* AC97: STAC9721
* CA0151: Yes
*/
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10071102,
.driver = "Audigy2", .name = "SB Audigy 2 [SB0240]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit */
.ac97_chip = 1} ,
/* Audigy 2 Platinum EX */
/* Win driver sets A_IOCFG output to 0x1c00 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10051102,
.driver = "Audigy2", .name = "Audigy 2 Platinum EX [SB0280]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1} ,
/* Dell OEM/Creative Labs Audigy 2 ZS */
/* See ALSA bug#1365 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10031102,
.driver = "Audigy2", .name = "SB Audigy 2 ZS [SB0353]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
/* Audigy 2 Platinum */
/* Win driver sets A_IOCFG output to 0xa00 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
.driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.adc_1361t = 1, /* 24 bit capture instead of 16bit. Fixes ALSA bug#324 */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .revision = 0x04,
.driver = "Audigy2", .name = "SB Audigy 2 [Unknown]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ca0151_chip = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00531102,
.driver = "Audigy", .name = "SB Audigy 1 [SB0092]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00521102,
.driver = "Audigy", .name = "SB Audigy 1 ES [SB0160]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00511102,
.driver = "Audigy", .name = "SB Audigy 1 [SB0090]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004,
.driver = "Audigy", .name = "Audigy 1 [Unknown]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x100a1102,
.driver = "EMU10K1", .name = "SB Live! 5.1 [SB0220]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806b1102,
.driver = "EMU10K1", .name = "SB Live! [SB0105]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806a1102,
.driver = "EMU10K1", .name = "SB Live! Value [SB0103]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80691102,
.driver = "EMU10K1", .name = "SB Live! Value [SB0101]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by ALSA bug#1680 26th December 2005 */
/* note: It really has SB0220 written on the card, */
/* but it's SB0228 according to kx.inf */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80661102,
.driver = "EMU10K1", .name = "SB Live! 5.1 Dell OEM [SB0228]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by Thomas Zehetbauer 27th Aug 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80651102,
.driver = "EMU10K1", .name = "SB Live! 5.1 [SB0220]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
.driver = "EMU10K1", .name = "SB Live! 5.1",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by alsa bugtrack user "hus" bug #1297 12th Aug 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102,
.driver = "EMU10K1", .name = "SB Live! 5.1 [SB0060]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 2, /* ac97 is optional; both SBLive 5.1 and platinum
* share the same IDs!
*/
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4850]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* SB Live! Platinum */
/* Win driver sets A_IOCFG output to 0 */
/* Tested by Jonathan Dowland <jon@dow.land> Apr 2023. */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
.driver = "EMU10K1", .name = "SB Live! Platinum [CT4760P]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80321102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4871]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80311102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4831]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80281102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4870]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4832]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80261102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4830]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80231102,
.driver = "EMU10K1", .name = "SB PCI512 [CT4790]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80221102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4780]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102,
.driver = "EMU10K1", .name = "E-MU APS [PC545]",
.id = "APS",
.emu10k1_chip = 1,
.ecard = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00211102,
.driver = "EMU10K1", .name = "SB Live! [CT4620]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00201102,
.driver = "EMU10K1", .name = "SB Live! Value [CT4670]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002,
.driver = "EMU10K1", .name = "SB Live! [Unknown]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{ } /* terminator */
};
/*
* The chip (at least the Audigy 2 CA0102 chip, but most likely others, too)
* has a problem that from time to time it likes to do few DMA reads a bit
* beyond its normal allocation and gets very confused if these reads get
* blocked by a IOMMU.
*
* This behaviour has been observed for the first (reserved) page
* (for which it happens multiple times at every playback), often for various
* synth pages and sometimes for PCM playback buffers and the page table
* memory itself.
*
* As a workaround let's widen these DMA allocations by an extra page if we
* detect that the device is behind a non-passthrough IOMMU.
*/
static void snd_emu10k1_detect_iommu(struct snd_emu10k1 *emu)
{
struct iommu_domain *domain;
emu->iommu_workaround = false;
domain = iommu_get_domain_for_dev(emu->card->dev);
if (!domain || domain->type == IOMMU_DOMAIN_IDENTITY)
return;
dev_notice(emu->card->dev,
"non-passthrough IOMMU detected, widening DMA allocations");
emu->iommu_workaround = true;
}
int snd_emu10k1_create(struct snd_card *card,
struct pci_dev *pci,
unsigned short extin_mask,
unsigned short extout_mask,
long max_cache_bytes,
int enable_ir,
uint subsystem)
{
struct snd_emu10k1 *emu = card->private_data;
int idx, err;
int is_audigy;
size_t page_table_size;
__le32 *pgtbl;
unsigned int silent_page;
const struct snd_emu_chip_details *c;
/* enable PCI device */
err = pcim_enable_device(pci);
if (err < 0)
return err;
card->private_free = snd_emu10k1_free;
emu->card = card;
spin_lock_init(&emu->reg_lock);
spin_lock_init(&emu->emu_lock);
spin_lock_init(&emu->spi_lock);
spin_lock_init(&emu->i2c_lock);
spin_lock_init(&emu->voice_lock);
spin_lock_init(&emu->synth_lock);
spin_lock_init(&emu->memblk_lock);
mutex_init(&emu->fx8010.lock);
INIT_LIST_HEAD(&emu->mapped_link_head);
INIT_LIST_HEAD(&emu->mapped_order_link_head);
emu->pci = pci;
emu->irq = -1;
emu->synth = NULL;
emu->get_synth_voice = NULL;
INIT_WORK(&emu->emu1010.firmware_work, emu1010_firmware_work);
INIT_WORK(&emu->emu1010.clock_work, emu1010_clock_work);
/* read revision & serial */
emu->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
dev_dbg(card->dev,
"vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n",
pci->vendor, pci->device, emu->serial, emu->model);
for (c = emu_chip_details; c->vendor; c++) {
if (c->vendor == pci->vendor && c->device == pci->device) {
if (subsystem) {
if (c->subsystem && (c->subsystem == subsystem))
break;
else
continue;
} else {
if (c->subsystem && (c->subsystem != emu->serial))
continue;
if (c->revision && c->revision != emu->revision)
continue;
}
break;
}
}
if (c->vendor == 0) {
dev_err(card->dev, "emu10k1: Card not recognised\n");
return -ENOENT;
}
emu->card_capabilities = c;
if (c->subsystem && !subsystem)
dev_dbg(card->dev, "Sound card name = %s\n", c->name);
else if (subsystem)
dev_dbg(card->dev, "Sound card name = %s, "
"vendor = 0x%x, device = 0x%x, subsystem = 0x%x. "
"Forced to subsystem = 0x%x\n", c->name,
pci->vendor, pci->device, emu->serial, c->subsystem);
else
dev_dbg(card->dev, "Sound card name = %s, "
"vendor = 0x%x, device = 0x%x, subsystem = 0x%x.\n",
c->name, pci->vendor, pci->device,
emu->serial);
if (!*card->id && c->id)
strscpy(card->id, c->id, sizeof(card->id));
is_audigy = emu->audigy = c->emu10k2_chip;
snd_emu10k1_detect_iommu(emu);
/* set addressing mode */
emu->address_mode = is_audigy ? 0 : 1;
/* set the DMA transfer mask */
emu->dma_mask = emu->address_mode ? EMU10K1_DMA_MASK : AUDIGY_DMA_MASK;
if (dma_set_mask_and_coherent(&pci->dev, emu->dma_mask) < 0) {
dev_err(card->dev,
"architecture does not support PCI busmaster DMA with mask 0x%lx\n",
emu->dma_mask);
return -ENXIO;
}
if (is_audigy)
emu->gpr_base = A_FXGPREGBASE;
else
emu->gpr_base = FXGPREGBASE;
err = pci_request_regions(pci, "EMU10K1");
if (err < 0)
return err;
emu->port = pci_resource_start(pci, 0);
emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
page_table_size = sizeof(u32) * (emu->address_mode ? MAXPAGES1 :
MAXPAGES0);
if (snd_emu10k1_alloc_pages_maybe_wider(emu, page_table_size,
&emu->ptb_pages) < 0)
return -ENOMEM;
dev_dbg(card->dev, "page table address range is %.8lx:%.8lx\n",
(unsigned long)emu->ptb_pages.addr,
(unsigned long)(emu->ptb_pages.addr + emu->ptb_pages.bytes));
emu->page_ptr_table = vmalloc(array_size(sizeof(void *),
emu->max_cache_pages));
emu->page_addr_table = vmalloc(array_size(sizeof(unsigned long),
emu->max_cache_pages));
if (!emu->page_ptr_table || !emu->page_addr_table)
return -ENOMEM;
if (snd_emu10k1_alloc_pages_maybe_wider(emu, EMUPAGESIZE,
&emu->silent_page) < 0)
return -ENOMEM;
dev_dbg(card->dev, "silent page range is %.8lx:%.8lx\n",
(unsigned long)emu->silent_page.addr,
(unsigned long)(emu->silent_page.addr +
emu->silent_page.bytes));
emu->memhdr = snd_util_memhdr_new(emu->max_cache_pages * PAGE_SIZE);
if (!emu->memhdr)
return -ENOMEM;
emu->memhdr->block_extra_size = sizeof(struct snd_emu10k1_memblk) -
sizeof(struct snd_util_memblk);
pci_set_master(pci);
// The masks are not used for Audigy.
// FIXME: these should come from the card_capabilites table.
if (extin_mask == 0)
extin_mask = 0x3fcf; // EXTIN_*
if (extout_mask == 0)
extout_mask = 0x7fff; // EXTOUT_*
emu->fx8010.extin_mask = extin_mask;
emu->fx8010.extout_mask = extout_mask;
emu->enable_ir = enable_ir;
if (emu->card_capabilities->ca_cardbus_chip) {
err = snd_emu10k1_cardbus_init(emu);
if (err < 0)
return err;
}
if (emu->card_capabilities->ecard) {
err = snd_emu10k1_ecard_init(emu);
if (err < 0)
return err;
} else if (emu->card_capabilities->emu_model) {
err = snd_emu10k1_emu1010_init(emu);
if (err < 0)
return err;
} else {
/* 5.1: Enable the additional AC97 Slots. If the emu10k1 version
does not support this, it shouldn't do any harm */
snd_emu10k1_ptr_write(emu, AC97SLOT, 0,
AC97SLOT_CNTR|AC97SLOT_LFE);
}
/* initialize TRAM setup */
emu->fx8010.itram_size = (16 * 1024)/2;
emu->fx8010.etram_pages.area = NULL;
emu->fx8010.etram_pages.bytes = 0;
/* irq handler must be registered after I/O ports are activated */
if (devm_request_irq(&pci->dev, pci->irq, snd_emu10k1_interrupt,
IRQF_SHARED, KBUILD_MODNAME, emu))
return -EBUSY;
emu->irq = pci->irq;
card->sync_irq = emu->irq;
/*
* Init to 0x02109204 :
* Clock accuracy = 0 (1000ppm)
* Sample Rate = 2 (48kHz)
* Audio Channel = 1 (Left of 2)
* Source Number = 0 (Unspecified)
* Generation Status = 1 (Original for Cat Code 12)
* Cat Code = 12 (Digital Signal Mixer)
* Mode = 0 (Mode 0)
* Emphasis = 0 (None)
* CP = 1 (Copyright unasserted)
* AN = 0 (Audio data)
* P = 0 (Consumer)
*/
emu->spdif_bits[0] = emu->spdif_bits[1] =
emu->spdif_bits[2] = SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
SPCS_GENERATIONSTATUS | 0x00001200 |
0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT;
/* Clear silent pages and set up pointers */
memset(emu->silent_page.area, 0, emu->silent_page.bytes);
silent_page = emu->silent_page.addr << emu->address_mode;
pgtbl = (__le32 *)emu->ptb_pages.area;
for (idx = 0; idx < (emu->address_mode ? MAXPAGES1 : MAXPAGES0); idx++)
pgtbl[idx] = cpu_to_le32(silent_page | idx);
/* set up voice indices */
for (idx = 0; idx < NUM_G; idx++)
emu->voices[idx].number = idx;
err = snd_emu10k1_init(emu, enable_ir);
if (err < 0)
return err;
#ifdef CONFIG_PM_SLEEP
err = alloc_pm_buffer(emu);
if (err < 0)
return err;
#endif
/* Initialize the effect engine */
err = snd_emu10k1_init_efx(emu);
if (err < 0)
return err;
snd_emu10k1_audio_enable(emu);
#ifdef CONFIG_SND_PROC_FS
snd_emu10k1_proc_init(emu);
#endif
return 0;
}
#ifdef CONFIG_PM_SLEEP
static const unsigned char saved_regs[] = {
CPF, PTRX, CVCF, VTFT, Z1, Z2, PSST, DSL, CCCA, CCR, CLP,
FXRT, MAPA, MAPB, ENVVOL, ATKHLDV, DCYSUSV, LFOVAL1, ENVVAL,
ATKHLDM, DCYSUSM, LFOVAL2, IP, IFATN, PEFE, FMMOD, TREMFRQ, FM2FRQ2,
TEMPENV, ADCCR, FXWC, MICBA, ADCBA, FXBA,
MICBS, ADCBS, FXBS, CDCS, GPSCS, SPCS0, SPCS1, SPCS2,
SPBYPASS, AC97SLOT, CDSRCS, GPSRCS, ZVSRCS, MICIDX, ADCIDX, FXIDX,
0xff /* end */
};
static const unsigned char saved_regs_audigy[] = {
A_ADCIDX, A_MICIDX, A_FXWC1, A_FXWC2, A_EHC,
A_FXRT2, A_SENDAMOUNTS, A_FXRT1,
0xff /* end */
};
static int alloc_pm_buffer(struct snd_emu10k1 *emu)
{
int size;
size = ARRAY_SIZE(saved_regs);
if (emu->audigy)
size += ARRAY_SIZE(saved_regs_audigy);
emu->saved_ptr = vmalloc(array3_size(4, NUM_G, size));
if (!emu->saved_ptr)
return -ENOMEM;
if (snd_emu10k1_efx_alloc_pm_buffer(emu) < 0)
return -ENOMEM;
if (emu->card_capabilities->ca0151_chip &&
snd_p16v_alloc_pm_buffer(emu) < 0)
return -ENOMEM;
return 0;
}
static void free_pm_buffer(struct snd_emu10k1 *emu)
{
vfree(emu->saved_ptr);
snd_emu10k1_efx_free_pm_buffer(emu);
if (emu->card_capabilities->ca0151_chip)
snd_p16v_free_pm_buffer(emu);
}
void snd_emu10k1_suspend_regs(struct snd_emu10k1 *emu)
{
int i;
const unsigned char *reg;
unsigned int *val;
val = emu->saved_ptr;
for (reg = saved_regs; *reg != 0xff; reg++)
for (i = 0; i < NUM_G; i++, val++)
*val = snd_emu10k1_ptr_read(emu, *reg, i);
if (emu->audigy) {
for (reg = saved_regs_audigy; *reg != 0xff; reg++)
for (i = 0; i < NUM_G; i++, val++)
*val = snd_emu10k1_ptr_read(emu, *reg, i);
}
if (emu->audigy)
emu->saved_a_iocfg = inw(emu->port + A_IOCFG);
emu->saved_hcfg = inl(emu->port + HCFG);
}
void snd_emu10k1_resume_init(struct snd_emu10k1 *emu)
{
if (emu->card_capabilities->ca_cardbus_chip)
snd_emu10k1_cardbus_init(emu);
if (emu->card_capabilities->ecard)
snd_emu10k1_ecard_init(emu);
else if (emu->card_capabilities->emu_model)
snd_emu10k1_emu1010_init(emu);
else
snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
snd_emu10k1_init(emu, emu->enable_ir);
}
void snd_emu10k1_resume_regs(struct snd_emu10k1 *emu)
{
int i;
const unsigned char *reg;
unsigned int *val;
snd_emu10k1_audio_enable(emu);
/* resore for spdif */
if (emu->audigy)
outw(emu->saved_a_iocfg, emu->port + A_IOCFG);
outl(emu->saved_hcfg, emu->port + HCFG);
val = emu->saved_ptr;
for (reg = saved_regs; *reg != 0xff; reg++)
for (i = 0; i < NUM_G; i++, val++)
snd_emu10k1_ptr_write(emu, *reg, i, *val);
if (emu->audigy) {
for (reg = saved_regs_audigy; *reg != 0xff; reg++)
for (i = 0; i < NUM_G; i++, val++)
snd_emu10k1_ptr_write(emu, *reg, i, *val);
}
}
#endif