|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III | 
|  | *            platforms. | 
|  | * | 
|  | * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net) | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <asm/bbc.h> | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #include "bbc_i2c.h" | 
|  |  | 
|  | /* Convert this driver to use i2c bus layer someday... */ | 
|  | #define I2C_PCF_PIN	0x80 | 
|  | #define I2C_PCF_ESO	0x40 | 
|  | #define I2C_PCF_ES1	0x20 | 
|  | #define I2C_PCF_ES2	0x10 | 
|  | #define I2C_PCF_ENI	0x08 | 
|  | #define I2C_PCF_STA	0x04 | 
|  | #define I2C_PCF_STO	0x02 | 
|  | #define I2C_PCF_ACK	0x01 | 
|  |  | 
|  | #define I2C_PCF_START    (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ENI | I2C_PCF_STA | I2C_PCF_ACK) | 
|  | #define I2C_PCF_STOP     (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK) | 
|  | #define I2C_PCF_REPSTART (              I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK) | 
|  | #define I2C_PCF_IDLE     (I2C_PCF_PIN | I2C_PCF_ESO               | I2C_PCF_ACK) | 
|  |  | 
|  | #define I2C_PCF_INI 0x40   /* 1 if not initialized */ | 
|  | #define I2C_PCF_STS 0x20 | 
|  | #define I2C_PCF_BER 0x10 | 
|  | #define I2C_PCF_AD0 0x08 | 
|  | #define I2C_PCF_LRB 0x08 | 
|  | #define I2C_PCF_AAS 0x04 | 
|  | #define I2C_PCF_LAB 0x02 | 
|  | #define I2C_PCF_BB  0x01 | 
|  |  | 
|  | /* The BBC devices have two I2C controllers.  The first I2C controller | 
|  | * connects mainly to configuration proms (NVRAM, cpu configuration, | 
|  | * dimm types, etc.).  Whereas the second I2C controller connects to | 
|  | * environmental control devices such as fans and temperature sensors. | 
|  | * The second controller also connects to the smartcard reader, if present. | 
|  | */ | 
|  |  | 
|  | static void set_device_claimage(struct bbc_i2c_bus *bp, struct platform_device *op, int val) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < NUM_CHILDREN; i++) { | 
|  | if (bp->devs[i].device == op) { | 
|  | bp->devs[i].client_claimed = val; | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #define claim_device(BP,ECHILD)		set_device_claimage(BP,ECHILD,1) | 
|  | #define release_device(BP,ECHILD)	set_device_claimage(BP,ECHILD,0) | 
|  |  | 
|  | struct platform_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index) | 
|  | { | 
|  | struct platform_device *op = NULL; | 
|  | int curidx = 0, i; | 
|  |  | 
|  | for (i = 0; i < NUM_CHILDREN; i++) { | 
|  | if (!(op = bp->devs[i].device)) | 
|  | break; | 
|  | if (curidx == index) | 
|  | goto out; | 
|  | op = NULL; | 
|  | curidx++; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (curidx == index) | 
|  | return op; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct platform_device *op) | 
|  | { | 
|  | struct bbc_i2c_client *client; | 
|  | const u32 *reg; | 
|  |  | 
|  | client = kzalloc(sizeof(*client), GFP_KERNEL); | 
|  | if (!client) | 
|  | return NULL; | 
|  | client->bp = bp; | 
|  | client->op = op; | 
|  |  | 
|  | reg = of_get_property(op->dev.of_node, "reg", NULL); | 
|  | if (!reg) { | 
|  | kfree(client); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | client->bus = reg[0]; | 
|  | client->address = reg[1]; | 
|  |  | 
|  | claim_device(bp, op); | 
|  |  | 
|  | return client; | 
|  | } | 
|  |  | 
|  | void bbc_i2c_detach(struct bbc_i2c_client *client) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = client->bp; | 
|  | struct platform_device *op = client->op; | 
|  |  | 
|  | release_device(bp, op); | 
|  | kfree(client); | 
|  | } | 
|  |  | 
|  | static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) | 
|  | { | 
|  | DECLARE_WAITQUEUE(wait, current); | 
|  | int limit = 32; | 
|  | int ret = 1; | 
|  |  | 
|  | bp->waiting = 1; | 
|  | add_wait_queue(&bp->wq, &wait); | 
|  | while (limit-- > 0) { | 
|  | long val; | 
|  |  | 
|  | val = wait_event_interruptible_timeout( | 
|  | bp->wq, | 
|  | (((*status = readb(bp->i2c_control_regs + 0)) | 
|  | & I2C_PCF_PIN) == 0), | 
|  | msecs_to_jiffies(250)); | 
|  | if (val > 0) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | remove_wait_queue(&bp->wq, &wait); | 
|  | bp->waiting = 0; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_writeb(struct bbc_i2c_client *client, unsigned char val, int off) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = client->bp; | 
|  | int address = client->address; | 
|  | u8 status; | 
|  | int ret = -1; | 
|  |  | 
|  | if (bp->i2c_bussel_reg != NULL) | 
|  | writeb(client->bus, bp->i2c_bussel_reg); | 
|  |  | 
|  | writeb(address, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | writeb(off, bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status) || | 
|  | (status & I2C_PCF_LRB) != 0) | 
|  | goto out; | 
|  |  | 
|  | writeb(val, bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | out: | 
|  | writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_readb(struct bbc_i2c_client *client, unsigned char *byte, int off) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = client->bp; | 
|  | unsigned char address = client->address, status; | 
|  | int ret = -1; | 
|  |  | 
|  | if (bp->i2c_bussel_reg != NULL) | 
|  | writeb(client->bus, bp->i2c_bussel_reg); | 
|  |  | 
|  | writeb(address, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | writeb(off, bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status) || | 
|  | (status & I2C_PCF_LRB) != 0) | 
|  | goto out; | 
|  |  | 
|  | writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | 
|  |  | 
|  | address |= 0x1; /* READ */ | 
|  |  | 
|  | writeb(address, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | /* Set PIN back to one so the device sends the first | 
|  | * byte. | 
|  | */ | 
|  | (void) readb(bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | writeb(I2C_PCF_ESO | I2C_PCF_ENI, bp->i2c_control_regs + 0x0); | 
|  | *byte = readb(bp->i2c_control_regs + 0x1); | 
|  | if (wait_for_pin(bp, &status)) | 
|  | goto out; | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | out: | 
|  | writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); | 
|  | (void) readb(bp->i2c_control_regs + 0x1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_write_buf(struct bbc_i2c_client *client, | 
|  | char *buf, int len, int off) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | while (len > 0) { | 
|  | ret = bbc_i2c_writeb(client, *buf, off); | 
|  | if (ret < 0) | 
|  | break; | 
|  | len--; | 
|  | buf++; | 
|  | off++; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int bbc_i2c_read_buf(struct bbc_i2c_client *client, | 
|  | char *buf, int len, int off) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | while (len > 0) { | 
|  | ret = bbc_i2c_readb(client, buf, off); | 
|  | if (ret < 0) | 
|  | break; | 
|  | len--; | 
|  | buf++; | 
|  | off++; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(bbc_i2c_getdev); | 
|  | EXPORT_SYMBOL(bbc_i2c_attach); | 
|  | EXPORT_SYMBOL(bbc_i2c_detach); | 
|  | EXPORT_SYMBOL(bbc_i2c_writeb); | 
|  | EXPORT_SYMBOL(bbc_i2c_readb); | 
|  | EXPORT_SYMBOL(bbc_i2c_write_buf); | 
|  | EXPORT_SYMBOL(bbc_i2c_read_buf); | 
|  |  | 
|  | static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = dev_id; | 
|  |  | 
|  | /* PIN going from set to clear is the only event which | 
|  | * makes the i2c assert an interrupt. | 
|  | */ | 
|  | if (bp->waiting && | 
|  | !(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN)) | 
|  | wake_up_interruptible(&bp->wq); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void reset_one_i2c(struct bbc_i2c_bus *bp) | 
|  | { | 
|  | writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); | 
|  | writeb(bp->own, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); | 
|  | writeb(bp->clock, bp->i2c_control_regs + 0x1); | 
|  | writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0); | 
|  | } | 
|  |  | 
|  | static struct bbc_i2c_bus * attach_one_i2c(struct platform_device *op, int index) | 
|  | { | 
|  | struct bbc_i2c_bus *bp; | 
|  | struct device_node *dp; | 
|  | int entry; | 
|  |  | 
|  | bp = kzalloc(sizeof(*bp), GFP_KERNEL); | 
|  | if (!bp) | 
|  | return NULL; | 
|  |  | 
|  | INIT_LIST_HEAD(&bp->temps); | 
|  | INIT_LIST_HEAD(&bp->fans); | 
|  |  | 
|  | bp->i2c_control_regs = of_ioremap(&op->resource[0], 0, 0x2, "bbc_i2c_regs"); | 
|  | if (!bp->i2c_control_regs) | 
|  | goto fail; | 
|  |  | 
|  | if (op->num_resources == 2) { | 
|  | bp->i2c_bussel_reg = of_ioremap(&op->resource[1], 0, 0x1, "bbc_i2c_bussel"); | 
|  | if (!bp->i2c_bussel_reg) | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | bp->waiting = 0; | 
|  | init_waitqueue_head(&bp->wq); | 
|  | if (request_irq(op->archdata.irqs[0], bbc_i2c_interrupt, | 
|  | IRQF_SHARED, "bbc_i2c", bp)) | 
|  | goto fail; | 
|  |  | 
|  | bp->index = index; | 
|  | bp->op = op; | 
|  |  | 
|  | spin_lock_init(&bp->lock); | 
|  |  | 
|  | entry = 0; | 
|  | for (dp = op->dev.of_node->child; | 
|  | dp && entry < 8; | 
|  | dp = dp->sibling, entry++) { | 
|  | struct platform_device *child_op; | 
|  |  | 
|  | child_op = of_find_device_by_node(dp); | 
|  | bp->devs[entry].device = child_op; | 
|  | bp->devs[entry].client_claimed = 0; | 
|  | } | 
|  |  | 
|  | writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); | 
|  | bp->own = readb(bp->i2c_control_regs + 0x01); | 
|  | writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); | 
|  | bp->clock = readb(bp->i2c_control_regs + 0x01); | 
|  |  | 
|  | printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n", | 
|  | bp->index, bp->i2c_control_regs, entry, bp->own, bp->clock); | 
|  |  | 
|  | reset_one_i2c(bp); | 
|  |  | 
|  | return bp; | 
|  |  | 
|  | fail: | 
|  | if (bp->i2c_bussel_reg) | 
|  | of_iounmap(&op->resource[1], bp->i2c_bussel_reg, 1); | 
|  | if (bp->i2c_control_regs) | 
|  | of_iounmap(&op->resource[0], bp->i2c_control_regs, 2); | 
|  | kfree(bp); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | extern int bbc_envctrl_init(struct bbc_i2c_bus *bp); | 
|  | extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp); | 
|  |  | 
|  | static int bbc_i2c_probe(struct platform_device *op) | 
|  | { | 
|  | struct bbc_i2c_bus *bp; | 
|  | int err, index = 0; | 
|  |  | 
|  | bp = attach_one_i2c(op, index); | 
|  | if (!bp) | 
|  | return -EINVAL; | 
|  |  | 
|  | err = bbc_envctrl_init(bp); | 
|  | if (err) { | 
|  | free_irq(op->archdata.irqs[0], bp); | 
|  | if (bp->i2c_bussel_reg) | 
|  | of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1); | 
|  | if (bp->i2c_control_regs) | 
|  | of_iounmap(&op->resource[1], bp->i2c_control_regs, 2); | 
|  | kfree(bp); | 
|  | } else { | 
|  | dev_set_drvdata(&op->dev, bp); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int bbc_i2c_remove(struct platform_device *op) | 
|  | { | 
|  | struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev); | 
|  |  | 
|  | bbc_envctrl_cleanup(bp); | 
|  |  | 
|  | free_irq(op->archdata.irqs[0], bp); | 
|  |  | 
|  | if (bp->i2c_bussel_reg) | 
|  | of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1); | 
|  | if (bp->i2c_control_regs) | 
|  | of_iounmap(&op->resource[1], bp->i2c_control_regs, 2); | 
|  |  | 
|  | kfree(bp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id bbc_i2c_match[] = { | 
|  | { | 
|  | .name = "i2c", | 
|  | .compatible = "SUNW,bbc-i2c", | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, bbc_i2c_match); | 
|  |  | 
|  | static struct platform_driver bbc_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "bbc_i2c", | 
|  | .of_match_table = bbc_i2c_match, | 
|  | }, | 
|  | .probe		= bbc_i2c_probe, | 
|  | .remove		= bbc_i2c_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(bbc_i2c_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); |