blob: dcbe89dc4d2b5405fc4a856b2e5fc0801dbb2e4b [file]
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef _UAPI_ASM_X86_AMD_HSMP_H_
#define _UAPI_ASM_X86_AMD_HSMP_H_
#include <linux/types.h>
#pragma pack(4)
#define HSMP_MAX_MSG_LEN 8
/*
* HSMP client platforms (Ryzen Master SMC) accept at most four input
* argument words and four output/response words per message.
*/
#define HSMP_CLIENT_MAX_MSG_LEN 4
/*
* HSMP Messages supported
*/
enum hsmp_message_ids {
HSMP_TEST = 1, /* 01h Increments input value by 1 */
HSMP_GET_SMU_VER, /* 02h SMU FW version */
HSMP_GET_PROTO_VER, /* 03h HSMP interface version */
HSMP_GET_SOCKET_POWER, /* 04h average package power consumption */
HSMP_SET_SOCKET_POWER_LIMIT, /* 05h Set the socket power limit */
HSMP_GET_SOCKET_POWER_LIMIT, /* 06h Get current socket power limit */
HSMP_GET_SOCKET_POWER_LIMIT_MAX,/* 07h Get maximum socket power value */
HSMP_SET_BOOST_LIMIT, /* 08h Set a core maximum frequency limit */
HSMP_SET_BOOST_LIMIT_SOCKET, /* 09h Set socket maximum frequency level */
HSMP_GET_BOOST_LIMIT, /* 0Ah Get current frequency limit */
HSMP_GET_PROC_HOT, /* 0Bh Get PROCHOT status */
HSMP_SET_XGMI_LINK_WIDTH, /* 0Ch Set max and min width of xGMI Link */
HSMP_SET_DF_PSTATE, /* 0Dh Alter APEnable/Disable messages behavior */
HSMP_SET_AUTO_DF_PSTATE, /* 0Eh Enable DF P-State Performance Boost algorithm */
HSMP_GET_FCLK_MCLK, /* 0Fh Get FCLK and MEMCLK for current socket */
HSMP_GET_CCLK_THROTTLE_LIMIT, /* 10h Get CCLK frequency limit in socket */
HSMP_GET_C0_PERCENT, /* 11h Get average C0 residency in socket */
HSMP_SET_NBIO_DPM_LEVEL, /* 12h Set max/min LCLK DPM Level for a given NBIO */
HSMP_GET_NBIO_DPM_LEVEL, /* 13h Get LCLK DPM level min and max for a given NBIO */
HSMP_GET_DDR_BANDWIDTH, /* 14h Get theoretical maximum and current DDR Bandwidth */
HSMP_GET_TEMP_MONITOR, /* 15h Get socket temperature */
HSMP_GET_DIMM_TEMP_RANGE, /* 16h Get per-DIMM temperature range and refresh rate */
HSMP_GET_DIMM_POWER, /* 17h Get per-DIMM power consumption */
HSMP_GET_DIMM_THERMAL, /* 18h Get per-DIMM thermal sensors */
HSMP_GET_SOCKET_FREQ_LIMIT, /* 19h Get current active frequency per socket */
HSMP_GET_CCLK_CORE_LIMIT, /* 1Ah Get CCLK frequency limit per core */
HSMP_GET_RAILS_SVI, /* 1Bh Get SVI-based Telemetry for all rails */
HSMP_GET_SOCKET_FMAX_FMIN, /* 1Ch Get Fmax and Fmin per socket */
HSMP_GET_IOLINK_BANDWITH, /* 1Dh Get current bandwidth on IO Link */
HSMP_GET_XGMI_BANDWITH, /* 1Eh Get current bandwidth on xGMI Link */
HSMP_SET_GMI3_WIDTH, /* 1Fh Set max and min GMI3 Link width */
HSMP_SET_PCI_RATE, /* 20h Control link rate on PCIe devices */
HSMP_SET_POWER_MODE, /* 21h Select power efficiency profile policy */
HSMP_SET_PSTATE_MAX_MIN, /* 22h Set the max and min DF P-State */
HSMP_GET_METRIC_TABLE_VER, /* 23h Get metrics table version */
HSMP_GET_METRIC_TABLE, /* 24h Get metrics table */
HSMP_GET_METRIC_TABLE_DRAM_ADDR,/* 25h Get metrics table dram address */
HSMP_SET_XGMI_PSTATE_RANGE, /* 26h Set xGMI P-state range */
HSMP_CPU_RAIL_ISO_FREQ_POLICY, /* 27h Get/Set Cpu Iso frequency policy */
HSMP_DFC_ENABLE_CTRL, /* 28h Enable/Disable DF C-state */
HSMP_PC6_ENABLE, /* 29h Get/Set PC6 enable/disable status */
HSMP_CC6_ENABLE, /* 2Ah Get/Set CC6 enable/disable status */
HSMP_GET_RAPL_UNITS = 0x30, /* 30h Get scaling factor for energy */
HSMP_GET_RAPL_CORE_COUNTER, /* 31h Get core energy counter value */
HSMP_GET_RAPL_PACKAGE_COUNTER, /* 32h Get package energy counter value */
HSMP_DIMM_SB_RD, /* 33h Get DIMM sideband data */
HSMP_READ_CCD_POWER, /* 34h Get average CCD power */
HSMP_READ_TDELTA, /* 35h Get thermal behaviour */
HSMP_GET_SVI3_VR_CTRL_TEMP, /* 36h Get SVI3 VR controller rail temp */
HSMP_GET_ENABLED_HSMP_CMDS, /* 37h Get supported HSMP commands */
HSMP_SET_GET_FLOOR_LIMIT, /* 38h Get/Set core floor frequency limit */
HSMP_DIMM_SB_WR, /* 39h Set DIMM sideband data */
HSMP_SDPS_LIMIT, /* 3Ah Get/Set SDPS limit */
HSMP_PQOS_TRAFFIC_PRIORITY, /* 3Bh Get/Set traffic priority */
HSMP_PQOS_FLOATING_BW, /* 3Ch Get/Set max floating bandwidth */
HSMP_MSG_ID_MAX,
};
/*
* The driver validates num_args and response_sz before sending a message.
* HSMP client platforms are bound to HSMP_CLIENT_MAX_MSG_LEN in each
* direction; server platforms are bound per-message by hsmp_msg_desc_table[].
*/
struct hsmp_message {
__u32 msg_id; /* Message ID */
__u16 num_args; /* Number of input argument words in message */
__u16 response_sz; /* Number of expected output/response words */
__u32 args[HSMP_MAX_MSG_LEN]; /* argument/response buffer */
__u16 sock_ind; /* socket number */
};
enum hsmp_msg_type {
HSMP_RSVD = -1,
HSMP_SET = 0,
HSMP_GET = 1,
HSMP_SET_GET = 2,
};
enum hsmp_proto_versions {
HSMP_PROTO_VER2 = 2,
HSMP_PROTO_VER3,
HSMP_PROTO_VER4,
HSMP_PROTO_VER5,
HSMP_PROTO_VER6,
HSMP_PROTO_VER7
};
/*
* Ryzen Master SMC interface version, reported by
* HSMP_CLIENT_GET_INTERFACE_VER. Separate numbering space from enum
* hsmp_proto_versions, which applies to the server set only.
*/
enum ryzen_master_proto_versions {
RYZEN_MASTER_PROTO_VER1 = 1,
};
struct hsmp_msg_desc {
int num_args;
int response_sz;
enum hsmp_msg_type type;
};
/*
* User may use these comments as reference, please find the
* supported list of messages and message definition in the
* HSMP chapter of respective family/model PPR.
*
* Not supported messages would return -ENOMSG.
*/
static const struct hsmp_msg_desc hsmp_msg_desc_table[]
__attribute__((unused)) = {
/* RESERVED */
{0, 0, HSMP_RSVD},
/*
* HSMP_TEST, num_args = 1, response_sz = 1
* input: args[0] = xx
* output: args[0] = xx + 1
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_SMU_VER, num_args = 0, response_sz = 1
* output: args[0] = smu fw ver
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_PROTO_VER, num_args = 0, response_sz = 1
* output: args[0] = proto version
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_SOCKET_POWER, num_args = 0, response_sz = 1
* output: args[0] = socket power in mWatts
*/
{0, 1, HSMP_GET},
/*
* HSMP_SET_SOCKET_POWER_LIMIT, num_args = 1, response_sz = 0
* input: args[0] = power limit value in mWatts
*/
{1, 0, HSMP_SET},
/*
* HSMP_GET_SOCKET_POWER_LIMIT, num_args = 0, response_sz = 1
* output: args[0] = socket power limit value in mWatts
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_SOCKET_POWER_LIMIT_MAX, num_args = 0, response_sz = 1
* output: args[0] = maximuam socket power limit in mWatts
*/
{0, 1, HSMP_GET},
/*
* HSMP_SET_BOOST_LIMIT, num_args = 1, response_sz = 0
* input: args[0] = apic id[31:16] + boost limit value in MHz[15:0]
*/
{1, 0, HSMP_SET},
/*
* HSMP_SET_BOOST_LIMIT_SOCKET, num_args = 1, response_sz = 0
* input: args[0] = boost limit value in MHz
*/
{1, 0, HSMP_SET},
/*
* HSMP_GET_BOOST_LIMIT, num_args = 1, response_sz = 1
* input: args[0] = apic id
* output: args[0] = boost limit value in MHz
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_PROC_HOT, num_args = 0, response_sz = 1
* output: args[0] = proc hot status
*/
{0, 1, HSMP_GET},
/*
* HSMP_SET_XGMI_LINK_WIDTH, num_args = 1, response_sz = 0/1
* input: args[0] = set/get XGMI Link width[31] (0 = set, 1 = get) +
* min link width[15:8] + max link width[7:0]
* Link width encoding: 0 = x4, 1 = x8, 2 = x16.
* On SET, max must be >= min. On GET, [15:0] are reserved.
* output: args[0] = reserved[31:16] + min link width[15:8] +
* max link width[7:0]
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_SET_DF_PSTATE (APBDisable), num_args = 1, response_sz = 0/1
* input: args[0] = set APB_DISABLE / get APB state[31]
* (0 = set & lock DF P-state, 1 = get) +
* reserved[30:8] +
* DF P-state[7:0] (0..2; reserved on GET)
* output: args[0] = reserved[31:9] +
* APB state[8] (1 = disabled, 0 = enabled) +
* locked DF P-state[7:0] if [8] = 1, else reserved
*/
{1, 1, HSMP_SET_GET},
/* HSMP_SET_AUTO_DF_PSTATE, num_args = 0, response_sz = 0 */
{0, 0, HSMP_SET},
/*
* HSMP_GET_FCLK_MCLK, num_args = 0, response_sz = 2
* output: args[0] = fclk in MHz, args[1] = mclk in MHz
*/
{0, 2, HSMP_GET},
/*
* HSMP_GET_CCLK_THROTTLE_LIMIT, num_args = 0, response_sz = 1
* output: args[0] = core clock in MHz
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_C0_PERCENT, num_args = 0, response_sz = 1
* output: args[0] = average c0 residency
*/
{0, 1, HSMP_GET},
/*
* HSMP_SET_NBIO_DPM_LEVEL, num_args = 1, response_sz = 0
* input: args[0] = nbioid[23:16] + max dpm level[15:8] + min dpm level[7:0]
*/
{1, 0, HSMP_SET},
/*
* HSMP_GET_NBIO_DPM_LEVEL, num_args = 1, response_sz = 1
* input: args[0] = nbioid[23:16]
* output: args[0] = max dpm level[15:8] + min dpm level[7:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_DDR_BANDWIDTH, num_args = 0, response_sz = 1
* output: args[0] = max bw in Gbps[31:20] + utilised bw in Gbps[19:8] +
* bw in percentage[7:0]
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_TEMP_MONITOR, num_args = 0, response_sz = 1
* output: args[0] = temperature in degree celsius. [15:8] integer part +
* [7:5] fractional part
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_DIMM_TEMP_RANGE, num_args = 1, response_sz = 1
* input: args[0] = DIMM address[7:0]
* output: args[0] = refresh rate[3] + temperature range[2:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_DIMM_POWER, num_args = 1, response_sz = 1
* input: args[0] = DIMM address[7:0]
* output: args[0] = DIMM power in mW[31:17] + update rate in ms[16:8] +
* DIMM address[7:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_DIMM_THERMAL, num_args = 1, response_sz = 1
* input: args[0] = DIMM address[7:0]
* output: args[0] = temperature in degree celsius[31:21] + update rate in ms[16:8] +
* DIMM address[7:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_SOCKET_FREQ_LIMIT, num_args = 0, response_sz = 1
* output: args[0] = frequency in MHz[31:16] + frequency source[15:0]
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_CCLK_CORE_LIMIT, num_args = 1, response_sz = 1
* input: args[0] = apic id [31:0]
* output: args[0] = frequency in MHz[31:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_RAILS_SVI, num_args = 0, response_sz = 1
* output: args[0] = power in mW[31:0]
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_SOCKET_FMAX_FMIN, num_args = 0, response_sz = 1
* output: args[0] = fmax in MHz[31:16] + fmin in MHz[15:0]
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_IOLINK_BANDWITH, num_args = 1, response_sz = 1
* input: args[0] = link id[15:8] + bw type[2:0]
* output: args[0] = io bandwidth in Mbps[31:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_XGMI_BANDWITH, num_args = 1, response_sz = 1
* input: args[0] = link id[15:8] + bw type[2:0]
* output: args[0] = xgmi bandwidth in Mbps[31:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_SET_GMI3_WIDTH, num_args = 1, response_sz = 0
* input: args[0] = min link width[15:8] + max link width[7:0]
*/
{1, 0, HSMP_SET},
/*
* HSMP_SET_PCI_RATE, num_args = 1, response_sz = 1
* input: args[0] = link rate control value
* output: args[0] = previous link rate control value
*/
{1, 1, HSMP_SET},
/*
* HSMP_SET_POWER_MODE (PwrEfficiencyModeSelection),
* num_args = 1, response_sz = 1
* input: args[0] = set/get policy[31] (0 = set, 1 = get) +
* high util point[30:24] +
* low util point[23:17] +
* PPT limit[16:5] +
* reserved[4:3] + mode selection[2:0]
* [30:5] are valid only when [2:0] is a balanced core mode
* (4 or 5). [2:0] is reserved when getting (bit[31] = 1).
* output: args[0] same layout, [31] reserved, [2:0] = arbitrated
* current efficiency mode.
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_SET_PSTATE_MAX_MIN (DfPstateRange), num_args = 1, response_sz = 0/1
* input: args[0] = set/get DF P-state range[31] (0 = set, 1 = get) +
* reserved[30:16] +
* min DF P-state[15:8] + max DF P-state[7:0]
* DF P-state encoding: 0 = DFP0 (high performance),
* 1 = DFP1, 2 = DFP2 (low performance).
* [15:0] are reserved when getting (args[0] bit[31] = 1).
* output: args[0] = reserved[31:16] + min DF P-state[15:8] +
* max DF P-state[7:0]
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_GET_METRIC_TABLE_VER, num_args = 0, response_sz = 1
* output: args[0] = metrics table version
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_METRIC_TABLE, num_args = 0, response_sz = 0
*/
{0, 0, HSMP_GET},
/*
* HSMP_GET_METRIC_TABLE_DRAM_ADDR, num_args = 0, response_sz = 3
* output: args[0] = lower 32 bits of the address
* output: args[1] = upper 32 bits of the address
* output: args[2] = DRAM region size in bytes
*/
{0, 3, HSMP_GET},
/*
* HSMP_SET_XGMI_PSTATE_RANGE, num_args = 1, response_sz = 0
* input: args[0] = min xGMI p-state[15:8] + max xGMI p-state[7:0]
*/
{1, 0, HSMP_SET},
/*
* HSMP_CPU_RAIL_ISO_FREQ_POLICY, num_args = 1, response_sz = 1
* input: args[0] = set/get policy[31] +
* disable/enable independent control[0]
* output: args[0] = current policy[0]
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_DFC_ENABLE_CTRL, num_args = 1, response_sz = 1
* input: args[0] = set/get policy[31] + enable/disable DFC[0]
* output: args[0] = current policy[0]
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_PC6_ENABLE (Pc6Enable), num_args = 1, response_sz = 0/1
* input: args[0] = set/get PC6 control[31] (0 = set, 1 = get) +
* reserved[30:1] +
* enable PC6[0] (0 = disable, 1 = enable;
* reserved on GET)
* output: args[0] = reserved[31:1] + current PC6 control[0]
* (last value configured via HSMP or APML)
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_CC6_ENABLE (CC6Enable), num_args = 1, response_sz = 0/1
* Configures CC6 enable for all cores; changing the setting does
* not by itself transition cores in or out of CC6.
* input: args[0] = set/get CC6 control[31] (0 = set, 1 = get) +
* reserved[30:1] +
* enable CC6[0] (0 = disable, 1 = enable;
* reserved on GET)
* output: args[0] = reserved[31:1] + current CC6 control[0]
* (last value configured via HSMP or APML)
*/
{1, 1, HSMP_SET_GET},
/* RESERVED(0x2B-0x2F) */
{0, 0, HSMP_RSVD},
{0, 0, HSMP_RSVD},
{0, 0, HSMP_RSVD},
{0, 0, HSMP_RSVD},
{0, 0, HSMP_RSVD},
/*
* HSMP_GET_RAPL_UNITS, response_sz = 1
* output: args[0] = tu value[19:16] + esu value[12:8]
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_RAPL_CORE_COUNTER, num_args = 1, response_sz = 1
* input: args[0] = apic id[15:0]
* output: args[0] = lower 32 bits of energy
* output: args[1] = upper 32 bits of energy
*/
{1, 2, HSMP_GET},
/*
* HSMP_GET_RAPL_PACKAGE_COUNTER, num_args = 0, response_sz = 1
* output: args[0] = lower 32 bits of energy
* output: args[1] = upper 32 bits of energy
*/
{0, 2, HSMP_GET},
/*
* HSMP_DIMM_SB_RD, num_args = 1, response_sz = 1
* input: args[0] = reg space[23] + reg offset[22:12] +
* device LID[11:8] + DIMM address[7:0]
* output: args[0] = read data byte[3:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_READ_CCD_POWER, num_args = 1, response_sz = 1
* input: args[0] = apic id of core[15:0]
* output: args[0] = CCD power(mWatts)[31:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_READ_TDELTA, num_args = 0, response_sz = 1
* output: args[0] = thermal behaviour[31:0]
*/
{0, 1, HSMP_GET},
/*
* HSMP_GET_SVI3_VR_CTRL_TEMP, num_args = 1, response_sz = 1
* input: args[0] = SVI3 rail index[3:1] + read temperature[0]
* output: args[0] = SVI3 rail index[30:28] +
* rail temperature in degree C[27:0]
*/
{1, 1, HSMP_GET},
/*
* HSMP_GET_ENABLED_HSMP_CMDS, num_args = 1, response_sz = 3
* input: args[0] = HSMP command mask[0]
* output: status of HSMP command = args[0], args[1], args[2]
*/
{1, 3, HSMP_GET},
/*
* HSMP_SET_GET_FLOOR_LIMIT, num_args = 1, response_sz = 1
* input: args[0] = op[31:30] + reserved[29:28] +
* apic id[27:16] + floor frequency MHz[15:0]
* op encoding: 00 = set per-core floor,
* 01 = set all-cores floor (apic id reserved),
* 10 = get per-core floor,
* 11 = get per-core effective floor.
* Floor frequency field is reserved on GET (bit[31] = 1).
* output: args[0] = floor frequency MHz[15:0]
* (effective for op 11, configured for op 10;
* reserved on SET)
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_DIMM_SB_WR, num_args = 1, response_sz = 0
* input: args[0] = write data[31:24] + reg space[23] +
* reg offset[22:12] + device LID[11:8] +
* DIMM address[7:0]
*/
{1, 0, HSMP_SET},
/*
* HSMP_SDPS_LIMIT, num_args = 1, response_sz = 1
* input: args[0] = set/get SDPS limit[31] (0 = set, 1 = get) +
* SDPS limit[30:0]
* output: args[0] = SDPS limit[30:0]
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_PQOS_TRAFFIC_PRIORITY, num_args = 1, response_sz = 1
* input: args[0] = op[31:30] + priority sel[27:26] +
* priority val[21:20] + input[19:0]
* output: args[0] = supported priorities or priority val[1:0]
*/
{1, 1, HSMP_SET_GET},
/*
* HSMP_PQOS_FLOATING_BW, num_args = 1, response_sz = 2
* input: args[0] = op[31] + sub-op[30:29] + params[28:0]
* output: args[0] = discovery bits or floating/global memory BW (Gbps)
* output: args[1] = reserved or config (drop adj, sampling delay,
* hysteresis)
*/
{1, 2, HSMP_SET_GET},
};
/* Metrics table (supported only with proto version 6) */
struct hsmp_metric_table {
__u32 accumulation_counter;
/* TEMPERATURE */
__u32 max_socket_temperature;
__u32 max_vr_temperature;
__u32 max_hbm_temperature;
__u64 max_socket_temperature_acc;
__u64 max_vr_temperature_acc;
__u64 max_hbm_temperature_acc;
/* POWER */
__u32 socket_power_limit;
__u32 max_socket_power_limit;
__u32 socket_power;
/* ENERGY */
__u64 timestamp;
__u64 socket_energy_acc;
__u64 ccd_energy_acc;
__u64 xcd_energy_acc;
__u64 aid_energy_acc;
__u64 hbm_energy_acc;
/* FREQUENCY */
__u32 cclk_frequency_limit;
__u32 gfxclk_frequency_limit;
__u32 fclk_frequency;
__u32 uclk_frequency;
__u32 socclk_frequency[4];
__u32 vclk_frequency[4];
__u32 dclk_frequency[4];
__u32 lclk_frequency[4];
__u64 gfxclk_frequency_acc[8];
__u64 cclk_frequency_acc[96];
/* FREQUENCY RANGE */
__u32 max_cclk_frequency;
__u32 min_cclk_frequency;
__u32 max_gfxclk_frequency;
__u32 min_gfxclk_frequency;
__u32 fclk_frequency_table[4];
__u32 uclk_frequency_table[4];
__u32 socclk_frequency_table[4];
__u32 vclk_frequency_table[4];
__u32 dclk_frequency_table[4];
__u32 lclk_frequency_table[4];
__u32 max_lclk_dpm_range;
__u32 min_lclk_dpm_range;
/* XGMI */
__u32 xgmi_width;
__u32 xgmi_bitrate;
__u64 xgmi_read_bandwidth_acc[8];
__u64 xgmi_write_bandwidth_acc[8];
/* ACTIVITY */
__u32 socket_c0_residency;
__u32 socket_gfx_busy;
__u32 dram_bandwidth_utilization;
__u64 socket_c0_residency_acc;
__u64 socket_gfx_busy_acc;
__u64 dram_bandwidth_acc;
__u32 max_dram_bandwidth;
__u64 dram_bandwidth_utilization_acc;
__u64 pcie_bandwidth_acc[4];
/* THROTTLERS */
__u32 prochot_residency_acc;
__u32 ppt_residency_acc;
__u32 socket_thm_residency_acc;
__u32 vr_thm_residency_acc;
__u32 hbm_thm_residency_acc;
__u32 spare;
/* New items at the end to maintain driver compatibility */
__u32 gfxclk_frequency[8];
};
/**
* struct hsmp_telemetry_data - Request descriptor for HSMP telemetry IOCTL
* @buf: Input. Userspace pointer (encoded as __u64 to keep the layout
* stable between 32-bit and 64-bit callers) to the destination
* buffer that receives the metric table.
* @size: Input. Size in bytes of the buffer pointed to by @buf, and the
* number of bytes copied out on success. Must be non-zero and no
* larger than the metric table size firmware reports for this
* socket; a larger value is rejected with -EINVAL rather than
* short-written. A smaller value returns the leading @size bytes
* of the snapshot. The kernel does not write this field back.
* @sock_ind: Input. Socket index from which the metric table is read.
* @reserved: Reserved for future use. Callers should set this to zero;
* future kernels may begin interpreting the field, so passing
* a non-zero value today is not forwards compatible.
*
* Placing @buf first lets all fields fall on their natural alignment under
* the surrounding #pragma pack(4), so the struct is a tight 16 bytes with
* the same wire layout on 32-bit and 64-bit userspace.
*
* The metric table layout depends on the HSMP protocol version reported by
* firmware, which userspace can read from the protocol_version sysfs
* attribute. Protocol version 6 uses struct hsmp_metric_table, so callers on
* that version pass sizeof(struct hsmp_metric_table). Later version metrics
* table layout is documented in the Public PPR.
*/
struct hsmp_telemetry_data {
__u64 buf;
__u32 size;
__u16 sock_ind;
__u16 reserved;
};
/* Reset to default packing */
#pragma pack()
/* Define unique ioctl command for hsmp msgs using generic _IOWR */
#define HSMP_BASE_IOCTL_NR 0xF8
#define HSMP_IOCTL_CMD _IOWR(HSMP_BASE_IOCTL_NR, 0, struct hsmp_message)
/*
* Fetch the firmware metric (telemetry) table for a given socket via the
* HSMP character device. This avoids the PAGE_SIZE limitation of the
* sysfs binary attribute path for tables larger than one page (such as the
* ~13 KB table used by HSMP protocol version 7).
*
* The direction is _IOW because the kernel only reads the request struct;
* the table itself is written to the buffer that @buf points at.
*/
#define HSMP_IOCTL_GET_TELEMETRY_DATA \
_IOW(HSMP_BASE_IOCTL_NR, 1, struct hsmp_telemetry_data)
/**
* enum hsmp_client_message_ids - Ryzen Master SMC (RMSMC) message IDs
* @HSMP_CLIENT_TEST: 01h. Test message. input: args[0] = xx. output:
* args[0] = xx + 1.
* @HSMP_CLIENT_GET_SMU_VER: 02h. Get MP1 firmware version. output:
* args[0] = MP1 firmware version.
* @HSMP_CLIENT_GET_INTERFACE_VER: 03h. Get interface version. output:
* args[0] = interface version.
* @HSMP_CLIENT_GET_METRICS_TABLE_VER: 04h. Get metrics table version.
* output: args[0] = metrics table version.
* @HSMP_CLIENT_GET_METRICS_TABLE: 05h. Get metrics table. No arguments.
* Success means firmware has written the metrics table to the DRAM
* address reported by @HSMP_CLIENT_GET_METRICS_TABLE_DRAM_ADDR.
* @HSMP_CLIENT_GET_METRICS_TABLE_DRAM_ADDR: 06h. Get metrics table DRAM
* address. output: args[0] = address[31:0], args[1] = address[63:32],
* args[2] = table size in bytes.
* @HSMP_CLIENT_SET_CORE_PSM_MARGIN: 07h. Set core voltage margin. input:
* args[0] = ccx number[31:28] + core number[27:20] + reserved[19:16] +
* margin in mV[15:0].
* @HSMP_CLIENT_SET_ALL_CORE_PSM_MARGIN: 08h. Set voltage margin for all
* cores. input: args[0] = margin in mV[15:0].
* @HSMP_CLIENT_SET_FAST_PPT_LIMIT: 09h. Set APU fast PPT limit. input:
* args[0] = limit in mW.
* @HSMP_CLIENT_SET_VRM_VDD_CURRENT_LIMIT: 0Ah. Set VDDCR_VDD TDC. input:
* args[0] = limit in mA.
* @HSMP_CLIENT_SET_VRM_VDD_MAX_CURRENT_LIMIT: 0Bh. Set VDDCR_VDD EDC.
* input: args[0] = limit in mA.
* @HSMP_CLIENT_SET_TJ_MAX: 0Ch. Set maximum junction temperature. input:
* args[0] = temperature in degrees C.
* @HSMP_CLIENT_SET_FIT_LIMIT_SCALAR: 0Dh. Set failures-in-time limit
* scalar. input: args[0] = scalar (0 to 100).
* @HSMP_CLIENT_ENABLE_OVERCLOCKING: 0Eh. Enable overclocking. No
* arguments.
* @HSMP_CLIENT_DISABLE_OVERCLOCKING: 0Fh. Disable overclocking. No
* arguments.
* @HSMP_CLIENT_SET_OVERCLOCK_FREQ_ALL_CORES: 10h. Set all-core overclock
* frequency. input: args[0] = frequency in MHz[15:0].
* @HSMP_CLIENT_SET_OVERCLOCK_FREQ_PER_CORE: 11h. Set per-core overclock
* frequency. input: args[0] = ccd number[31:28] + ccx number[27:24] +
* core number[23:20] + frequency in MHz[19:0].
* @HSMP_CLIENT_SET_OVERCLOCK_VID: 12h. Set overclock VID. input:
* args[0] = reserved[31:17] + vid[16:8] + pstate[7:0].
* @HSMP_CLIENT_SPARE_0X13: 13h. Reserved.
* @HSMP_CLIENT_GET_CORE_PERF_ORDER: 14h. Get core performance order.
* input: args[0] = core performance rank index[31:0] (0 to Enabled
* cores-1). output: args[0] = voltage in mV[31:21] + frequency in
* MHz[20:9] + fll[8:6] + core number[5:2] + ccx number[1:0].
* @HSMP_CLIENT_SET_SUSTAINED_POWER_LIMIT: 15h. Set SOC sustained power
* limit. input: args[0] = limit in mW.
* @HSMP_CLIENT_SET_SLOW_PPT_LIMIT: 16h. Set APU slow PPT limit. input:
* args[0] = limit in mW.
* @HSMP_CLIENT_SET_VRM_GFX_MAX_CURRENT_LIMIT: 17h. Set VDDCR_GFX EDC.
* input: args[0] = limit in mA.
* @HSMP_CLIENT_SET_VRM_SOC_CURRENT_LIMIT: 18h. Set VDDCR_SOC TDC. input:
* args[0] = limit in mA.
* @HSMP_CLIENT_SET_FAST_SPM_LIMIT: 19h. Set fast SPM limit. input:
* args[0] = limit in mW.
* @HSMP_CLIENT_SET_SLOW_SPM_LIMIT: 1Ah. Set slow SPM limit. input:
* args[0] = limit in mW.
* @HSMP_CLIENT_GET_CORE_PSM_MARGIN: 1Bh. Get core voltage margin. input:
* args[0] = ccx number[31:28] + core number[27:20] + reserved[19:0].
* output: args[0] = ccx number[31:28] + core number[27:20] +
* reserved[19:16] + margin in mV[15:0].
* @HSMP_CLIENT_GET_GFX_PSM_MARGIN: 1Ch. Get graphics voltage margin.
* output: args[0] = margin in mV[15:0].
* @HSMP_CLIENT_SPARE_0X1D: 1Dh. Reserved.
* @HSMP_CLIENT_SPARE_0X1E: 1Eh. Reserved.
* @HSMP_CLIENT_SPARE_0X1F: 1Fh. Reserved.
* @HSMP_CLIENT_SPARE_0X20: 20h. Reserved.
* @HSMP_CLIENT_SET_GFXCLK_OVERDRIVE_BY_FREQ_VID: 21h. Set GfxClk
* overdrive by frequency/VID. input: args[0] = reserved[31:25] +
* vid[24:16] + frequency in MHz[15:0].
* @HSMP_CLIENT_DISABLE_GFXCLK_OVERDRIVE: 22h. Disable GfxClk overdrive.
* No arguments.
* @HSMP_CLIENT_SET_GFX_PSM_MARGIN: 23h. Set graphics voltage margin.
* input: args[0] = margin in mV[15:0].
* @HSMP_CLIENT_SET_CCLK_FMAX_OFFSET: 24h. Set CCLK Fmax offset. input:
* args[0] = maximum frequency in MHz[15:0].
* @HSMP_CLIENT_SET_CORE_POWER_LIMIT_OFFSET: 25h. Set core power limit
* offset. input: args[0] = limit in mW.
* @HSMP_CLIENT_ADD_EXTRA_PSM_GUARDBAND: 26h. Add extra core PSM
* guardband. input: args[0] = PsmGuardband[2][31:24] +
* PsmGuardband[1][23:16] + PsmGuardband[0][15:8] + TriggerUpdate[7] +
* AvfsType[6:4] + frequency index[3:0].
* @HSMP_CLIENT_ADD_EXTRA_PSM_GUARDBAND_GFX: 27h. Add extra graphics PSM
* guardband. input: args[0] = PsmGuardband[2][31:24] +
* PsmGuardband[1][23:16] + PsmGuardband[0][15:8] + TriggerUpdate[7] +
* frequency index[6:0].
* @HSMP_CLIENT_SET_GFXCLK_FMAX: 28h. Set GfxClk Fmax. input: args[0] =
* maximum frequency in MHz[15:0].
* @HSMP_CLIENT_MSG_ID_MAX: Number of message IDs, not a valid ID itself.
*
* Message IDs accepted on the Family 1Ah client platforms, Models 80h-8Fh
* and E0h-E3h. These parts drive one mailbox and speak the Ryzen Master
* SMC message set instead of the server HSMP message set enumerated in
* &enum hsmp_message_ids. Not all platforms support all messages; consult
* the supported list of messages in the HSMP chapter of the respective
* family/model PPR. Unsupported messages return -ENOMSG.
*/
enum hsmp_client_message_ids {
HSMP_CLIENT_TEST = 1,
HSMP_CLIENT_GET_SMU_VER,
HSMP_CLIENT_GET_INTERFACE_VER,
HSMP_CLIENT_GET_METRICS_TABLE_VER,
HSMP_CLIENT_GET_METRICS_TABLE,
HSMP_CLIENT_GET_METRICS_TABLE_DRAM_ADDR,
HSMP_CLIENT_SET_CORE_PSM_MARGIN,
HSMP_CLIENT_SET_ALL_CORE_PSM_MARGIN,
HSMP_CLIENT_SET_FAST_PPT_LIMIT,
HSMP_CLIENT_SET_VRM_VDD_CURRENT_LIMIT,
HSMP_CLIENT_SET_VRM_VDD_MAX_CURRENT_LIMIT,
HSMP_CLIENT_SET_TJ_MAX,
HSMP_CLIENT_SET_FIT_LIMIT_SCALAR,
HSMP_CLIENT_ENABLE_OVERCLOCKING,
HSMP_CLIENT_DISABLE_OVERCLOCKING,
HSMP_CLIENT_SET_OVERCLOCK_FREQ_ALL_CORES,
HSMP_CLIENT_SET_OVERCLOCK_FREQ_PER_CORE,
HSMP_CLIENT_SET_OVERCLOCK_VID,
HSMP_CLIENT_SPARE_0X13,
HSMP_CLIENT_GET_CORE_PERF_ORDER,
HSMP_CLIENT_SET_SUSTAINED_POWER_LIMIT,
HSMP_CLIENT_SET_SLOW_PPT_LIMIT,
HSMP_CLIENT_SET_VRM_GFX_MAX_CURRENT_LIMIT,
HSMP_CLIENT_SET_VRM_SOC_CURRENT_LIMIT,
HSMP_CLIENT_SET_FAST_SPM_LIMIT,
HSMP_CLIENT_SET_SLOW_SPM_LIMIT,
HSMP_CLIENT_GET_CORE_PSM_MARGIN,
HSMP_CLIENT_GET_GFX_PSM_MARGIN,
HSMP_CLIENT_SPARE_0X1D,
HSMP_CLIENT_SPARE_0X1E,
HSMP_CLIENT_SPARE_0X1F,
HSMP_CLIENT_SPARE_0X20,
HSMP_CLIENT_SET_GFXCLK_OVERDRIVE_BY_FREQ_VID,
HSMP_CLIENT_DISABLE_GFXCLK_OVERDRIVE,
HSMP_CLIENT_SET_GFX_PSM_MARGIN,
HSMP_CLIENT_SET_CCLK_FMAX_OFFSET,
HSMP_CLIENT_SET_CORE_POWER_LIMIT_OFFSET,
HSMP_CLIENT_ADD_EXTRA_PSM_GUARDBAND,
HSMP_CLIENT_ADD_EXTRA_PSM_GUARDBAND_GFX,
HSMP_CLIENT_SET_GFXCLK_FMAX,
HSMP_CLIENT_MSG_ID_MAX,
};
#define HSMP_TELEMETRY_RM_MAX_CCX 4
#define HSMP_TELEMETRY_RM_CORES_PER_CCX 12
#define HSMP_TELEMETRY_RM_FREQ_TABLE_SIZE 8
#define HSMP_TELEMETRY_RM_NPU_BUSY_DOMAINS 3
#define HSMP_TELEMETRY_RM_OC_DOMAINS 5
#define HSMP_TELEMETRY_RM_OC_SUBDOMAINS 5
#define HSMP_TELEMETRY_RM_OC_GUARDBANDS 3
/* Firmware packs this table to a 4-byte boundary */
#pragma pack(push, 4)
/*
* struct hsmp_telemetry_table_rm_iod - I/O die counters for RM telemetry.
*
* Accumulator (*_acc) fields are monotonic counters; consumers derive
* deltas across two snapshots and normalise by accumulation_counter.
*/
struct hsmp_telemetry_table_rm_iod {
__u32 accumulation_counter;
/* SET VOLTAGES */
__u64 vddcr_set_voltage;
__u64 vddcr_soc_set_voltage;
__u64 vddcr_npu_set_voltage;
__u64 vddcr_lp_set_voltage;
__u64 vddcr_gfx_set_voltage;
__u64 vdd_misc_set_voltage;
/* TELEMETRY VOLTAGES */
__u64 vddcr_telemetry_voltage;
__u64 vddcr_soc_telemetry_voltage;
__u64 vddcr_npu_telemetry_voltage;
__u64 vddcr_lp_telemetry_voltage;
__u64 vddcr_gfx_telemetry_voltage;
__u64 vdd_misc_telemetry_voltage;
/* TELEMETRY POWERS */
__u64 vddcr_telemetry_power;
__u64 vddcr_soc_telemetry_power;
__u64 vddcr_npu_telemetry_power;
__u64 vddcr_lp_telemetry_power;
__u64 vddcr_gfx_telemetry_power;
__u64 vdd_misc_telemetry_power;
/* THROTTLERS - FAST PPT */
__u32 fppt_fused_limit;
__u32 fppt_max_irm_limit;
__u32 fppt_max_pbo_limit;
__u32 fppt_limit;
__u64 fppt_value_acc;
__u32 fppt_residency_acc;
/* THROTTLERS - SLOW PPT */
__u32 sppt_fused_limit;
__u32 sppt_max_irm_limit;
__u32 sppt_max_pbo_limit;
__u32 sppt_limit;
__u64 sppt_value_acc;
__u32 sppt_residency_acc;
/* THROTTLERS - SPL */
__u32 spl_fused_limit;
__u32 spl_max_irm_limit;
__u32 spl_max_pbo_limit;
__u32 spl_limit;
__u64 spl_value_acc;
__u32 spl_residency_acc;
/* THROTTLERS - TDC VDDCR */
__u32 tdc_vddcr_fused_limit;
__u32 tdc_vddcr_max_irm_limit;
__u32 tdc_vddcr_max_pbo_limit;
__u32 tdc_vddcr_limit;
__u64 tdc_vddcr_value_acc;
__u32 tdc_vddcr_residency_acc;
/* THROTTLERS - TDC VDDCR SOC */
__u32 tdc_vddcr_soc_fused_limit;
__u32 tdc_vddcr_soc_max_irm_limit;
__u32 tdc_vddcr_soc_max_pbo_limit;
__u32 tdc_vddcr_soc_limit;
__u64 tdc_vddcr_soc_value_acc;
__u32 tdc_vddcr_soc_residency_acc;
/* THROTTLERS - TDC VDDCR NPU */
__u32 tdc_vddcr_npu_fused_limit;
__u32 tdc_vddcr_npu_max_irm_limit;
__u32 tdc_vddcr_npu_max_pbo_limit;
__u32 tdc_vddcr_npu_limit;
__u64 tdc_vddcr_npu_value_acc;
__u32 tdc_vddcr_npu_residency_acc;
/* THROTTLERS - TDC VDDCR LP */
__u32 tdc_vddcr_lp_fused_limit;
__u32 tdc_vddcr_lp_max_irm_limit;
__u32 tdc_vddcr_lp_max_pbo_limit;
__u32 tdc_vddcr_lp_limit;
__u64 tdc_vddcr_lp_value_acc;
__u32 tdc_vddcr_lp_residency_acc;
/* THROTTLERS - TDC VDDCR GFX */
__u32 tdc_vddcr_gfx_fused_limit;
__u32 tdc_vddcr_gfx_max_irm_limit;
__u32 tdc_vddcr_gfx_max_pbo_limit;
__u32 tdc_vddcr_gfx_limit;
__u64 tdc_vddcr_gfx_value_acc;
__u32 tdc_vddcr_gfx_residency_acc;
/* THROTTLERS - EDC VDDCR */
__u32 edc_vddcr_fused_limit;
__u32 edc_vddcr_max_irm_limit;
__u32 edc_vddcr_max_pbo_limit;
__u32 edc_vddcr_limit;
/* THROTTLERS - THERMAL */
__u32 thm_fused_limit;
__u32 thm_limit;
__u64 thm_value_acc;
__u32 thm_residency_acc;
__u32 prochot_residency_acc;
__u64 gfx_temp_acc;
__u64 soc_temp_acc;
__u32 p3t_fused_limit;
__u64 p3t_value_acc;
/* POWER */
__u64 system_power_acc;
__u64 apu_power_acc;
__u64 dgpu_power_acc;
__u64 npu_power_acc;
/* FREQUENCIES */
__u64 fclk_freq_eff_acc;
__u64 memclk_freq_eff_acc;
__u64 lclk_freq_eff_acc;
__u64 gfxclk_freq_eff_acc;
__u64 socclk_freq_eff_acc;
__u64 vclk_freq_eff_acc;
__u64 vpeclk_freq_eff_acc;
__u64 aieclk_freq_eff_acc;
__u64 npuhclk_freq_eff_acc;
/* BANDWIDTH */
__u64 dram_read_bandwidth;
__u64 dram_write_bandwidth;
/* ACTIVITY MONITORS */
__u64 gfx_busy_acc;
__u64 vcn_busy_acc;
__u64 npu_busy_acc[HSMP_TELEMETRY_RM_NPU_BUSY_DOMAINS];
/* STT (Skin Temperature Tracking) */
__u32 stt_min_limit;
__u64 stt_apu_hot_spot_temp_acc;
__u64 stt_hs2_hot_spot_temp_acc;
__u32 stt_apu_temp_limit;
__u64 stt_apu_skin_temp_acc;
/* RESIDENCIES - per-CCX CPU off */
__u64 cpu_off_residency[HSMP_TELEMETRY_RM_MAX_CCX];
/* DF P-STATES */
__u32 fclk_freq_table[HSMP_TELEMETRY_RM_FREQ_TABLE_SIZE];
__u32 uclk_freq_table[HSMP_TELEMETRY_RM_FREQ_TABLE_SIZE];
__u32 ddr_rate_table[HSMP_TELEMETRY_RM_FREQ_TABLE_SIZE];
__u8 df_pstate_source[HSMP_TELEMETRY_RM_FREQ_TABLE_SIZE];
/* SYSTEM */
__u8 gfx_disabled;
__u8 spare2[3];
__u32 gfxclk_fmax;
__u8 cclk_core_fuse_enable[HSMP_TELEMETRY_RM_MAX_CCX][HSMP_TELEMETRY_RM_CORES_PER_CCX];
__u8 cclk_core_enabled[HSMP_TELEMETRY_RM_MAX_CCX][HSMP_TELEMETRY_RM_CORES_PER_CCX];
__u32 cclk_fmax[HSMP_TELEMETRY_RM_MAX_CCX][HSMP_TELEMETRY_RM_CORES_PER_CCX];
/* OVERCLOCK CAPABLE */
__u8 cpu_precise_and_direct_oc_capable;
__u8 gfx_precise_and_direct_oc_capable;
__u8 pbo_basic_oc_capable;
__u8 pbo_advanced_oc_capable;
__u8 pbo_nitro_oc_capable;
__u8 memory_and_fabric_oc_capable;
__u8 misc_oc_capable;
__u8 extreme_cold_oc_capable;
__u8 down_config_control_capable;
__u8 spare0[3];
/* OVERCLOCK STATUS */
__u32 fit_limit_scalar;
__u8 ln2_enabled;
__u8 cpu_precise_and_direct_oc_enabled;
__u8 gfx_precise_and_direct_oc_enabled;
__u8 spare1[2];
__s8 psm_guardband[HSMP_TELEMETRY_RM_OC_DOMAINS]
[HSMP_TELEMETRY_RM_OC_SUBDOMAINS]
[HSMP_TELEMETRY_RM_OC_GUARDBANDS];
__s32 core_power_limit_offset;
__u32 max_freq_offset[HSMP_TELEMETRY_RM_OC_DOMAINS];
__u64 npu_temp_acc;
__u64 df_pstate_residency_acc[HSMP_TELEMETRY_RM_FREQ_TABLE_SIZE];
__u32 cclk_fboost;
/* PMF */
__u32 pmf_fast_apu_ppt_limit;
__u64 pmf_fast_apu_ppt_value_acc;
__u32 pmf_fast_apu_ppt_residency_acc;
__u32 pmf_slow_apu_ppt_limit;
__u64 pmf_slow_apu_ppt_value_acc;
__u32 pmf_slow_apu_ppt_residency_acc;
__u32 pmf_fast_spm_limit;
__u64 pmf_fast_spm_value_acc;
__u32 pmf_fast_spm_residency_acc;
__u32 pmf_slow_spm_limit;
__u64 pmf_slow_spm_value_acc;
__u32 pmf_slow_spm_residency_acc;
__u32 spare3[5];
};
/*
* struct hsmp_telemetry_table_rm_ccx - Per-CCX core counters for RM telemetry.
*
* Arrays are sized for the maximum cores per CCX; use the
* cclk_core_enabled[] mask in struct hsmp_telemetry_table_rm_iod to tell
* which entries are valid.
*/
struct hsmp_telemetry_table_rm_ccx {
__u64 core_c0[HSMP_TELEMETRY_RM_CORES_PER_CCX];
__u64 core_cc6[HSMP_TELEMETRY_RM_CORES_PER_CCX];
__u64 core_freq[HSMP_TELEMETRY_RM_CORES_PER_CCX];
__u64 core_freq_eff[HSMP_TELEMETRY_RM_CORES_PER_CCX];
__u64 core_temp[HSMP_TELEMETRY_RM_CORES_PER_CCX];
__u64 core_power[HSMP_TELEMETRY_RM_CORES_PER_CCX];
};
/**
* struct hsmp_telemetry_table_rm - Top-level RM telemetry table.
* @iod: I/O die counters and per-rail/per-throttler/SYSTEM telemetry.
* @ccx: Per-CCX core counters, one entry per CCX.
*
* Layout of the table returned by HSMP_CLIENT_GET_METRICS_TABLE on the
* Family 1Ah client (Models 80h-8Fh and E0h-E3h), reported as table
* version 5 by HSMP_CLIENT_GET_METRICS_TABLE_VER. Units are
* firmware-defined; see the AMD HSMP/Ryzen Master SMC spec. Spare
* fields are firmware padding and must be preserved.
*/
struct hsmp_telemetry_table_rm {
struct hsmp_telemetry_table_rm_iod iod;
struct hsmp_telemetry_table_rm_ccx ccx[HSMP_TELEMETRY_RM_MAX_CCX];
};
#pragma pack(pop)
#endif /*_ASM_X86_AMD_HSMP_H_*/