| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Machine check handler. | |
| * | |
| * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs. | |
| * Rest from unknown author(s). | |
| * 2004 Andi Kleen. Rewrote most of it. | |
| * Copyright 2008 Intel Corporation | |
| * Author: Andi Kleen | |
| */ | |
| #include <linux/thread_info.h> | |
| #include <linux/capability.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/kobject.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/kdebug.h> | |
| #include <linux/kernel.h> | |
| #include <linux/percpu.h> | |
| #include <linux/string.h> | |
| #include <linux/device.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/delay.h> | |
| #include <linux/ctype.h> | |
| #include <linux/sched.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/kmod.h> | |
| #include <linux/poll.h> | |
| #include <linux/nmi.h> | |
| #include <linux/cpu.h> | |
| #include <linux/ras.h> | |
| #include <linux/smp.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/irq_work.h> | |
| #include <linux/export.h> | |
| #include <linux/set_memory.h> | |
| #include <linux/sync_core.h> | |
| #include <linux/task_work.h> | |
| #include <linux/hardirq.h> | |
| #include <linux/kexec.h> | |
| #include <linux/vmcore_info.h> | |
| #include <asm/fred.h> | |
| #include <asm/cpu_device_id.h> | |
| #include <asm/cpuid/api.h> | |
| #include <asm/processor.h> | |
| #include <asm/traps.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/mce.h> | |
| #include <asm/msr.h> | |
| #include <asm/reboot.h> | |
| #include <asm/tdx.h> | |
| #include "internal.h" | |
| /* sysfs synchronization */ | |
| static DEFINE_MUTEX(mce_sysfs_mutex); | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/mce.h> | |
| #define SPINUNIT 100 /* 100ns */ | |
| DEFINE_PER_CPU_READ_MOSTLY(unsigned int, mce_num_banks); | |
| DEFINE_PER_CPU_READ_MOSTLY(struct mce_bank[MAX_NR_BANKS], mce_banks_array); | |
| #define ATTR_LEN 16 | |
| /* One object for each MCE bank, shared by all CPUs */ | |
| struct mce_bank_dev { | |
| struct device_attribute attr; /* device attribute */ | |
| char attrname[ATTR_LEN]; /* attribute name */ | |
| u8 bank; /* bank number */ | |
| }; | |
| static struct mce_bank_dev mce_bank_devs[MAX_NR_BANKS]; | |
| struct mce_vendor_flags mce_flags __read_mostly; | |
| struct mca_config mca_cfg __read_mostly = { | |
| .bootlog = -1, | |
| .monarch_timeout = -1 | |
| }; | |
| static DEFINE_PER_CPU(struct mce_hw_err, hw_errs_seen); | |
| /* | |
| * MCA banks polled by the period polling timer for corrected events. | |
| * With Intel CMCI, this only has MCA banks which do not support CMCI (if any). | |
| */ | |
| DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { | |
| [0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL | |
| }; | |
| /* | |
| * MCA banks controlled through firmware first for corrected errors. | |
| * This is a global list of banks for which we won't enable CMCI and we | |
| * won't poll. Firmware controls these banks and is responsible for | |
| * reporting corrected errors through GHES. Uncorrected/recoverable | |
| * errors are still notified through a machine check. | |
| */ | |
| mce_banks_t mce_banks_ce_disabled; | |
| static struct work_struct mce_work; | |
| static struct irq_work mce_irq_work; | |
| /* | |
| * CPU/chipset specific EDAC code can register a notifier call here to print | |
| * MCE errors in a human-readable form. | |
| */ | |
| BLOCKING_NOTIFIER_HEAD(x86_mce_decoder_chain); | |
| void mce_prep_record_common(struct mce *m) | |
| { | |
| m->cpuid = cpuid_eax(1); | |
| m->cpuvendor = boot_cpu_data.x86_vendor; | |
| m->mcgcap = native_rdmsrq(MSR_IA32_MCG_CAP); | |
| /* need the internal __ version to avoid deadlocks */ | |
| m->time = __ktime_get_real_seconds(); | |
| } | |
| void mce_prep_record_per_cpu(unsigned int cpu, struct mce *m) | |
| { | |
| m->cpu = cpu; | |
| m->extcpu = cpu; | |
| m->apicid = cpu_data(cpu).topo.initial_apicid; | |
| m->microcode = cpu_data(cpu).microcode; | |
| m->ppin = topology_ppin(cpu); | |
| m->socketid = topology_physical_package_id(cpu); | |
| } | |
| /* Do initial initialization of struct mce_hw_err */ | |
| void mce_prep_record(struct mce_hw_err *err) | |
| { | |
| struct mce *m = &err->m; | |
| memset(err, 0, sizeof(struct mce_hw_err)); | |
| mce_prep_record_common(m); | |
| mce_prep_record_per_cpu(smp_processor_id(), m); | |
| } | |
| DEFINE_PER_CPU(struct mce, injectm); | |
| EXPORT_PER_CPU_SYMBOL_GPL(injectm); | |
| void mce_log(struct mce_hw_err *err) | |
| { | |
| if (mce_gen_pool_add(err)) { | |
| pr_info(HW_ERR "Machine check events logged\n"); | |
| irq_work_queue(&mce_irq_work); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(mce_log); | |
| void mce_register_decode_chain(struct notifier_block *nb) | |
| { | |
| if (WARN_ON(nb->priority < MCE_PRIO_LOWEST || | |
| nb->priority > MCE_PRIO_HIGHEST)) | |
| return; | |
| blocking_notifier_chain_register(&x86_mce_decoder_chain, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(mce_register_decode_chain); | |
| void mce_unregister_decode_chain(struct notifier_block *nb) | |
| { | |
| blocking_notifier_chain_unregister(&x86_mce_decoder_chain, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(mce_unregister_decode_chain); | |
| static void __print_mce(struct mce_hw_err *err) | |
| { | |
| struct mce *m = &err->m; | |
| pr_emerg(HW_ERR "CPU %d: Machine Check%s: %Lx Bank %d: %016Lx\n", | |
| m->extcpu, | |
| (m->mcgstatus & MCG_STATUS_MCIP ? " Exception" : ""), | |
| m->mcgstatus, m->bank, m->status); | |
| if (m->ip) { | |
| pr_emerg(HW_ERR "RIP%s %02x:<%016Lx> ", | |
| !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "", | |
| m->cs, m->ip); | |
| if (m->cs == __KERNEL_CS) | |
| pr_cont("{%pS}", (void *)(unsigned long)m->ip); | |
| pr_cont("\n"); | |
| } | |
| pr_emerg(HW_ERR "TSC %llx ", m->tsc); | |
| if (m->addr) | |
| pr_cont("ADDR %llx ", m->addr); | |
| if (m->misc) | |
| pr_cont("MISC %llx ", m->misc); | |
| if (m->ppin) | |
| pr_cont("PPIN %llx ", m->ppin); | |
| if (mce_flags.smca) { | |
| if (m->synd) | |
| pr_cont("SYND %llx ", m->synd); | |
| if (err->vendor.amd.synd1) | |
| pr_cont("SYND1 %llx ", err->vendor.amd.synd1); | |
| if (err->vendor.amd.synd2) | |
| pr_cont("SYND2 %llx ", err->vendor.amd.synd2); | |
| if (m->ipid) | |
| pr_cont("IPID %llx ", m->ipid); | |
| } | |
| pr_cont("\n"); | |
| /* | |
| * Note this output is parsed by external tools and old fields | |
| * should not be changed. | |
| */ | |
| pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x microcode %x\n", | |
| m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid, | |
| m->microcode); | |
| } | |
| static void print_mce(struct mce_hw_err *err) | |
| { | |
| struct mce *m = &err->m; | |
| __print_mce(err); | |
| if (m->cpuvendor != X86_VENDOR_AMD && m->cpuvendor != X86_VENDOR_HYGON) | |
| pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n"); | |
| } | |
| #define PANIC_TIMEOUT 5 /* 5 seconds */ | |
| static atomic_t mce_panicked; | |
| static int fake_panic; | |
| static atomic_t mce_fake_panicked; | |
| /* Panic in progress. Enable interrupts and wait for final IPI */ | |
| static void wait_for_panic(void) | |
| { | |
| long timeout = PANIC_TIMEOUT*USEC_PER_SEC; | |
| preempt_disable(); | |
| local_irq_enable(); | |
| while (timeout-- > 0) | |
| udelay(1); | |
| if (panic_timeout == 0) | |
| panic_timeout = mca_cfg.panic_timeout; | |
| panic("Panicing machine check CPU died"); | |
| } | |
| static const char *mce_dump_aux_info(struct mce *m) | |
| { | |
| if (boot_cpu_has_bug(X86_BUG_TDX_PW_MCE)) | |
| return tdx_dump_mce_info(m); | |
| return NULL; | |
| } | |
| static noinstr void mce_panic(const char *msg, struct mce_hw_err *final, char *exp) | |
| { | |
| struct llist_node *pending; | |
| struct mce_evt_llist *l; | |
| int apei_err = 0; | |
| const char *memmsg; | |
| /* | |
| * Allow instrumentation around external facilities usage. Not that it | |
| * matters a whole lot since the machine is going to panic anyway. | |
| */ | |
| instrumentation_begin(); | |
| if (!fake_panic) { | |
| /* | |
| * Make sure only one CPU runs in machine check panic | |
| */ | |
| if (atomic_inc_return(&mce_panicked) > 1) | |
| wait_for_panic(); | |
| barrier(); | |
| bust_spinlocks(1); | |
| console_verbose(); | |
| } else { | |
| /* Don't log too much for fake panic */ | |
| if (atomic_inc_return(&mce_fake_panicked) > 1) | |
| goto out; | |
| } | |
| pending = mce_gen_pool_prepare_records(); | |
| /* First print corrected ones that are still unlogged */ | |
| llist_for_each_entry(l, pending, llnode) { | |
| struct mce_hw_err *err = &l->err; | |
| struct mce *m = &err->m; | |
| if (!(m->status & MCI_STATUS_UC)) { | |
| print_mce(err); | |
| if (!apei_err) | |
| apei_err = apei_write_mce(m); | |
| } | |
| } | |
| /* Now print uncorrected but with the final one last */ | |
| llist_for_each_entry(l, pending, llnode) { | |
| struct mce_hw_err *err = &l->err; | |
| struct mce *m = &err->m; | |
| if (!(m->status & MCI_STATUS_UC)) | |
| continue; | |
| if (!final || mce_cmp(m, &final->m)) { | |
| print_mce(err); | |
| if (!apei_err) | |
| apei_err = apei_write_mce(m); | |
| } | |
| } | |
| if (final) { | |
| print_mce(final); | |
| if (!apei_err) | |
| apei_err = apei_write_mce(&final->m); | |
| } | |
| if (exp) | |
| pr_emerg(HW_ERR "Machine check: %s\n", exp); | |
| memmsg = mce_dump_aux_info(&final->m); | |
| if (memmsg) | |
| pr_emerg(HW_ERR "Machine check: %s\n", memmsg); | |
| if (!fake_panic) { | |
| if (panic_timeout == 0) | |
| panic_timeout = mca_cfg.panic_timeout; | |
| /* | |
| * Kdump skips the poisoned page in order to avoid | |
| * touching the error bits again. Poison the page even | |
| * if the error is fatal and the machine is about to | |
| * panic. | |
| */ | |
| if (kexec_crash_loaded()) { | |
| if (final && (final->m.status & MCI_STATUS_ADDRV)) { | |
| struct page *p; | |
| p = pfn_to_online_page(final->m.addr >> PAGE_SHIFT); | |
| if (p) | |
| SetPageHWPoison(p); | |
| } | |
| } | |
| panic(msg); | |
| } else | |
| pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg); | |
| out: | |
| instrumentation_end(); | |
| } | |
| /* Support code for software error injection */ | |
| static int msr_to_offset(u32 msr) | |
| { | |
| unsigned bank = __this_cpu_read(injectm.bank); | |
| if (msr == mca_cfg.rip_msr) | |
| return offsetof(struct mce, ip); | |
| if (msr == mca_msr_reg(bank, MCA_STATUS)) | |
| return offsetof(struct mce, status); | |
| if (msr == mca_msr_reg(bank, MCA_ADDR)) | |
| return offsetof(struct mce, addr); | |
| if (msr == mca_msr_reg(bank, MCA_MISC)) | |
| return offsetof(struct mce, misc); | |
| if (msr == MSR_IA32_MCG_STATUS) | |
| return offsetof(struct mce, mcgstatus); | |
| return -1; | |
| } | |
| void ex_handler_msr_mce(struct pt_regs *regs, bool wrmsr) | |
| { | |
| if (wrmsr) { | |
| pr_emerg("MSR access error: WRMSR to 0x%x (tried to write 0x%08x%08x) at rIP: 0x%lx (%pS)\n", | |
| (unsigned int)regs->cx, (unsigned int)regs->dx, (unsigned int)regs->ax, | |
| regs->ip, (void *)regs->ip); | |
| } else { | |
| pr_emerg("MSR access error: RDMSR from 0x%x at rIP: 0x%lx (%pS)\n", | |
| (unsigned int)regs->cx, regs->ip, (void *)regs->ip); | |
| } | |
| show_stack_regs(regs); | |
| panic("MCA architectural violation!\n"); | |
| while (true) | |
| cpu_relax(); | |
| } | |
| /* MSR access wrappers used for error injection */ | |
| noinstr u64 mce_rdmsrq(u32 msr) | |
| { | |
| EAX_EDX_DECLARE_ARGS(val, low, high); | |
| if (__this_cpu_read(injectm.finished)) { | |
| int offset; | |
| u64 ret; | |
| instrumentation_begin(); | |
| offset = msr_to_offset(msr); | |
| if (offset < 0) | |
| ret = 0; | |
| else | |
| ret = *(u64 *)((char *)this_cpu_ptr(&injectm) + offset); | |
| instrumentation_end(); | |
| return ret; | |
| } | |
| /* | |
| * RDMSR on MCA MSRs should not fault. If they do, this is very much an | |
| * architectural violation and needs to be reported to hw vendor. Panic | |
| * the box to not allow any further progress. | |
| */ | |
| asm volatile("1: rdmsr\n" | |
| "2:\n" | |
| _ASM_EXTABLE_TYPE(1b, 2b, EX_TYPE_RDMSR_IN_MCE) | |
| : EAX_EDX_RET(val, low, high) : "c" (msr)); | |
| return EAX_EDX_VAL(val, low, high); | |
| } | |
| noinstr void mce_wrmsrq(u32 msr, u64 v) | |
| { | |
| u32 low, high; | |
| if (__this_cpu_read(injectm.finished)) { | |
| int offset; | |
| instrumentation_begin(); | |
| offset = msr_to_offset(msr); | |
| if (offset >= 0) | |
| *(u64 *)((char *)this_cpu_ptr(&injectm) + offset) = v; | |
| instrumentation_end(); | |
| return; | |
| } | |
| low = (u32)v; | |
| high = (u32)(v >> 32); | |
| /* See comment in mce_rdmsrq() */ | |
| asm volatile("1: wrmsr\n" | |
| "2:\n" | |
| _ASM_EXTABLE_TYPE(1b, 2b, EX_TYPE_WRMSR_IN_MCE) | |
| : : "c" (msr), "a"(low), "d" (high) : "memory"); | |
| } | |
| /* | |
| * Collect all global (w.r.t. this processor) status about this machine | |
| * check into our "mce" struct so that we can use it later to assess | |
| * the severity of the problem as we read per-bank specific details. | |
| */ | |
| static noinstr void mce_gather_info(struct mce_hw_err *err, struct pt_regs *regs) | |
| { | |
| struct mce *m; | |
| /* | |
| * Enable instrumentation around mce_prep_record() which calls external | |
| * facilities. | |
| */ | |
| instrumentation_begin(); | |
| mce_prep_record(err); | |
| instrumentation_end(); | |
| m = &err->m; | |
| m->mcgstatus = mce_rdmsrq(MSR_IA32_MCG_STATUS); | |
| if (regs) { | |
| /* | |
| * Get the address of the instruction at the time of | |
| * the machine check error. | |
| */ | |
| if (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV)) { | |
| m->ip = regs->ip; | |
| m->cs = regs->cs; | |
| /* | |
| * When in VM86 mode make the cs look like ring 3 | |
| * always. This is a lie, but it's better than passing | |
| * the additional vm86 bit around everywhere. | |
| */ | |
| if (v8086_mode(regs)) | |
| m->cs |= 3; | |
| } | |
| /* Use accurate RIP reporting if available. */ | |
| if (mca_cfg.rip_msr) | |
| m->ip = mce_rdmsrq(mca_cfg.rip_msr); | |
| } | |
| } | |
| bool mce_available(struct cpuinfo_x86 *c) | |
| { | |
| if (mca_cfg.disabled) | |
| return false; | |
| return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA); | |
| } | |
| static void mce_schedule_work(void) | |
| { | |
| if (!mce_gen_pool_empty()) | |
| schedule_work(&mce_work); | |
| } | |
| static void mce_irq_work_cb(struct irq_work *entry) | |
| { | |
| mce_schedule_work(); | |
| } | |
| bool mce_usable_address(struct mce *m) | |
| { | |
| if (!(m->status & MCI_STATUS_ADDRV)) | |
| return false; | |
| switch (m->cpuvendor) { | |
| case X86_VENDOR_AMD: | |
| return amd_mce_usable_address(m); | |
| case X86_VENDOR_INTEL: | |
| case X86_VENDOR_ZHAOXIN: | |
| return intel_mce_usable_address(m); | |
| default: | |
| return true; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(mce_usable_address); | |
| bool mce_is_memory_error(struct mce *m) | |
| { | |
| switch (m->cpuvendor) { | |
| case X86_VENDOR_AMD: | |
| case X86_VENDOR_HYGON: | |
| return amd_mce_is_memory_error(m); | |
| case X86_VENDOR_INTEL: | |
| case X86_VENDOR_ZHAOXIN: | |
| /* | |
| * Intel SDM Volume 3B - 15.9.2 Compound Error Codes | |
| * | |
| * Bit 7 of the MCACOD field of IA32_MCi_STATUS is used for | |
| * indicating a memory error. Bit 8 is used for indicating a | |
| * cache hierarchy error. The combination of bit 2 and bit 3 | |
| * is used for indicating a `generic' cache hierarchy error | |
| * But we can't just blindly check the above bits, because if | |
| * bit 11 is set, then it is a bus/interconnect error - and | |
| * either way the above bits just gives more detail on what | |
| * bus/interconnect error happened. Note that bit 12 can be | |
| * ignored, as it's the "filter" bit. | |
| */ | |
| return (m->status & 0xef80) == BIT(7) || | |
| (m->status & 0xef00) == BIT(8) || | |
| (m->status & 0xeffc) == 0xc; | |
| default: | |
| return false; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(mce_is_memory_error); | |
| static bool whole_page(struct mce *m) | |
| { | |
| if (!mca_cfg.ser || !(m->status & MCI_STATUS_MISCV)) | |
| return true; | |
| return MCI_MISC_ADDR_LSB(m->misc) >= PAGE_SHIFT; | |
| } | |
| bool mce_is_correctable(struct mce *m) | |
| { | |
| if (m->cpuvendor == X86_VENDOR_AMD && m->status & MCI_STATUS_DEFERRED) | |
| return false; | |
| if (m->cpuvendor == X86_VENDOR_HYGON && m->status & MCI_STATUS_DEFERRED) | |
| return false; | |
| if (m->status & MCI_STATUS_UC) | |
| return false; | |
| return true; | |
| } | |
| EXPORT_SYMBOL_GPL(mce_is_correctable); | |
| static int mce_early_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce_hw_err *err = to_mce_hw_err(data); | |
| if (!err) | |
| return NOTIFY_DONE; | |
| /* Emit the trace record: */ | |
| trace_mce_record(err); | |
| mce_work_trigger(); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block early_nb = { | |
| .notifier_call = mce_early_notifier, | |
| .priority = MCE_PRIO_EARLY, | |
| }; | |
| static int uc_decode_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce *mce = (struct mce *)data; | |
| unsigned long pfn; | |
| if (!mce || !mce_usable_address(mce)) | |
| return NOTIFY_DONE; | |
| if (mce->severity != MCE_AO_SEVERITY && | |
| mce->severity != MCE_DEFERRED_SEVERITY) | |
| return NOTIFY_DONE; | |
| pfn = (mce->addr & MCI_ADDR_PHYSADDR) >> PAGE_SHIFT; | |
| if (!memory_failure(pfn, 0)) { | |
| set_mce_nospec(pfn); | |
| mce->kflags |= MCE_HANDLED_UC; | |
| } | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block mce_uc_nb = { | |
| .notifier_call = uc_decode_notifier, | |
| .priority = MCE_PRIO_UC, | |
| }; | |
| static int mce_default_notifier(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce_hw_err *err = to_mce_hw_err(data); | |
| if (!err) | |
| return NOTIFY_DONE; | |
| if (mca_cfg.print_all || !(err->m.kflags)) | |
| __print_mce(err); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block mce_default_nb = { | |
| .notifier_call = mce_default_notifier, | |
| /* lowest prio, we want it to run last. */ | |
| .priority = MCE_PRIO_LOWEST, | |
| }; | |
| /* | |
| * Read ADDR and MISC registers. | |
| */ | |
| static noinstr void mce_read_aux(struct mce_hw_err *err, int i) | |
| { | |
| struct mce *m = &err->m; | |
| if (m->status & MCI_STATUS_MISCV) | |
| m->misc = mce_rdmsrq(mca_msr_reg(i, MCA_MISC)); | |
| if (m->status & MCI_STATUS_ADDRV) { | |
| if (m->kflags & MCE_CHECK_DFR_REGS) | |
| m->addr = mce_rdmsrq(MSR_AMD64_SMCA_MCx_DEADDR(i)); | |
| else | |
| m->addr = mce_rdmsrq(mca_msr_reg(i, MCA_ADDR)); | |
| /* | |
| * Mask the reported address by the reported granularity. | |
| */ | |
| if (mca_cfg.ser && (m->status & MCI_STATUS_MISCV)) { | |
| u8 shift = MCI_MISC_ADDR_LSB(m->misc); | |
| m->addr >>= shift; | |
| m->addr <<= shift; | |
| } | |
| smca_extract_err_addr(m); | |
| } | |
| if (mce_flags.smca) { | |
| m->ipid = mce_rdmsrq(MSR_AMD64_SMCA_MCx_IPID(i)); | |
| if (m->status & MCI_STATUS_SYNDV) { | |
| m->synd = mce_rdmsrq(MSR_AMD64_SMCA_MCx_SYND(i)); | |
| err->vendor.amd.synd1 = mce_rdmsrq(MSR_AMD64_SMCA_MCx_SYND1(i)); | |
| err->vendor.amd.synd2 = mce_rdmsrq(MSR_AMD64_SMCA_MCx_SYND2(i)); | |
| } | |
| } | |
| } | |
| /* | |
| * We have three scenarios for checking for Deferred errors: | |
| * | |
| * 1) Non-SMCA systems check MCA_STATUS and log error if found. | |
| * 2) SMCA systems check MCA_STATUS. If error is found then log it and also | |
| * clear MCA_DESTAT. | |
| * 3) SMCA systems check MCA_DESTAT, if error was not found in MCA_STATUS, and | |
| * log it. | |
| */ | |
| static bool smca_should_log_poll_error(struct mce *m) | |
| { | |
| if (m->status & MCI_STATUS_VAL) | |
| return true; | |
| m->status = mce_rdmsrq(MSR_AMD64_SMCA_MCx_DESTAT(m->bank)); | |
| if ((m->status & MCI_STATUS_VAL) && (m->status & MCI_STATUS_DEFERRED)) { | |
| m->kflags |= MCE_CHECK_DFR_REGS; | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * Newer Intel systems that support software error | |
| * recovery need to make additional checks. Other | |
| * CPUs should skip over uncorrected errors, but log | |
| * everything else. | |
| */ | |
| static bool ser_should_log_poll_error(struct mce *m) | |
| { | |
| /* Log "not enabled" (speculative) errors */ | |
| if (!(m->status & MCI_STATUS_EN)) | |
| return true; | |
| /* | |
| * Log UCNA (SDM: 15.6.3 "UCR Error Classification") | |
| * UC == 1 && PCC == 0 && S == 0 | |
| */ | |
| if (!(m->status & MCI_STATUS_PCC) && !(m->status & MCI_STATUS_S)) | |
| return true; | |
| return false; | |
| } | |
| static bool should_log_poll_error(enum mcp_flags flags, struct mce_hw_err *err) | |
| { | |
| struct mce *m = &err->m; | |
| if (mce_flags.smca) | |
| return smca_should_log_poll_error(m); | |
| /* If this entry is not valid, ignore it. */ | |
| if (!(m->status & MCI_STATUS_VAL)) | |
| return false; | |
| /* | |
| * If we are logging everything (at CPU online) or this | |
| * is a corrected error, then we must log it. | |
| */ | |
| if ((flags & MCP_UC) || !(m->status & MCI_STATUS_UC)) | |
| return true; | |
| if (mca_cfg.ser) | |
| return ser_should_log_poll_error(m); | |
| if (m->status & MCI_STATUS_UC) | |
| return false; | |
| return true; | |
| } | |
| static void clear_bank(struct mce *m) | |
| { | |
| if (m->cpuvendor == X86_VENDOR_AMD) | |
| return amd_clear_bank(m); | |
| mce_wrmsrq(mca_msr_reg(m->bank, MCA_STATUS), 0); | |
| } | |
| /* | |
| * Poll for corrected events or events that happened before reset. | |
| * Those are just logged through /dev/mcelog. | |
| * | |
| * This is executed in standard interrupt context. | |
| * | |
| * Note: spec recommends to panic for fatal unsignalled | |
| * errors here. However this would be quite problematic -- | |
| * we would need to reimplement the Monarch handling and | |
| * it would mess up the exclusion between exception handler | |
| * and poll handler -- * so we skip this for now. | |
| * These cases should not happen anyways, or only when the CPU | |
| * is already totally * confused. In this case it's likely it will | |
| * not fully execute the machine check handler either. | |
| */ | |
| void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) | |
| { | |
| struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array); | |
| struct mce_hw_err err; | |
| struct mce *m; | |
| int i; | |
| inc_irq_stat(MCE_POLL); | |
| mce_gather_info(&err, NULL); | |
| m = &err.m; | |
| if (flags & MCP_TIMESTAMP) | |
| m->tsc = rdtsc(); | |
| for (i = 0; i < this_cpu_read(mce_num_banks); i++) { | |
| if (!mce_banks[i].ctl || !test_bit(i, *b)) | |
| continue; | |
| m->misc = 0; | |
| m->addr = 0; | |
| m->bank = i; | |
| barrier(); | |
| m->status = mce_rdmsrq(mca_msr_reg(i, MCA_STATUS)); | |
| /* | |
| * Update storm tracking here, before checking for the | |
| * MCI_STATUS_VAL bit. Valid corrected errors count | |
| * towards declaring, or maintaining, storm status. No | |
| * error in a bank counts towards avoiding, or ending, | |
| * storm status. | |
| */ | |
| if (!mca_cfg.cmci_disabled) | |
| mce_track_storm(m); | |
| /* Verify that the error should be logged based on hardware conditions. */ | |
| if (!should_log_poll_error(flags, &err)) | |
| continue; | |
| mce_read_aux(&err, i); | |
| m->severity = mce_severity(m, NULL, NULL, false); | |
| /* | |
| * Don't get the IP here because it's unlikely to | |
| * have anything to do with the actual error location. | |
| */ | |
| if (mca_cfg.dont_log_ce && !mce_usable_address(m)) | |
| goto clear_it; | |
| if (flags & MCP_QUEUE_LOG) | |
| mce_gen_pool_add(&err); | |
| else | |
| mce_log(&err); | |
| clear_it: | |
| clear_bank(m); | |
| } | |
| /* | |
| * Don't clear MCG_STATUS here because it's only defined for | |
| * exceptions. | |
| */ | |
| sync_core(); | |
| } | |
| EXPORT_SYMBOL_GPL(machine_check_poll); | |
| /* | |
| * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and | |
| * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM | |
| * Vol 3B Table 15-20). But this confuses both the code that determines | |
| * whether the machine check occurred in kernel or user mode, and also | |
| * the severity assessment code. Pretend that EIPV was set, and take the | |
| * ip/cs values from the pt_regs that mce_gather_info() ignored earlier. | |
| */ | |
| static __always_inline void | |
| quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs) | |
| { | |
| if (bank != 0) | |
| return; | |
| if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0) | |
| return; | |
| if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC| | |
| MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV| | |
| MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR| | |
| MCACOD)) != | |
| (MCI_STATUS_UC|MCI_STATUS_EN| | |
| MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S| | |
| MCI_STATUS_AR|MCACOD_INSTR)) | |
| return; | |
| m->mcgstatus |= MCG_STATUS_EIPV; | |
| m->ip = regs->ip; | |
| m->cs = regs->cs; | |
| } | |
| /* | |
| * Disable fast string copy and return from the MCE handler upon the first SRAR | |
| * MCE on bank 1 due to a CPU erratum on Intel Skylake/Cascade Lake/Cooper Lake | |
| * CPUs. | |
| * The fast string copy instructions ("REP; MOVS*") could consume an | |
| * uncorrectable memory error in the cache line _right after_ the desired region | |
| * to copy and raise an MCE with RIP pointing to the instruction _after_ the | |
| * "REP; MOVS*". | |
| * This mitigation addresses the issue completely with the caveat of performance | |
| * degradation on the CPU affected. This is still better than the OS crashing on | |
| * MCEs raised on an irrelevant process due to "REP; MOVS*" accesses from a | |
| * kernel context (e.g., copy_page). | |
| * | |
| * Returns true when fast string copy on CPU has been disabled. | |
| */ | |
| static noinstr bool quirk_skylake_repmov(void) | |
| { | |
| u64 mcgstatus = mce_rdmsrq(MSR_IA32_MCG_STATUS); | |
| u64 misc_enable = mce_rdmsrq(MSR_IA32_MISC_ENABLE); | |
| u64 mc1_status; | |
| /* | |
| * Apply the quirk only to local machine checks, i.e., no broadcast | |
| * sync is needed. | |
| */ | |
| if (!(mcgstatus & MCG_STATUS_LMCES) || | |
| !(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) | |
| return false; | |
| mc1_status = mce_rdmsrq(MSR_IA32_MCx_STATUS(1)); | |
| /* Check for a software-recoverable data fetch error. */ | |
| if ((mc1_status & | |
| (MCI_STATUS_VAL | MCI_STATUS_OVER | MCI_STATUS_UC | MCI_STATUS_EN | | |
| MCI_STATUS_ADDRV | MCI_STATUS_MISCV | MCI_STATUS_PCC | | |
| MCI_STATUS_AR | MCI_STATUS_S)) == | |
| (MCI_STATUS_VAL | MCI_STATUS_UC | MCI_STATUS_EN | | |
| MCI_STATUS_ADDRV | MCI_STATUS_MISCV | | |
| MCI_STATUS_AR | MCI_STATUS_S)) { | |
| misc_enable &= ~MSR_IA32_MISC_ENABLE_FAST_STRING; | |
| mce_wrmsrq(MSR_IA32_MISC_ENABLE, misc_enable); | |
| mce_wrmsrq(MSR_IA32_MCx_STATUS(1), 0); | |
| instrumentation_begin(); | |
| pr_err_once("Erratum detected, disable fast string copy instructions.\n"); | |
| instrumentation_end(); | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * Some Zen-based Instruction Fetch Units set EIPV=RIPV=0 on poison consumption | |
| * errors. This means mce_gather_info() will not save the "ip" and "cs" registers. | |
| * | |
| * However, the context is still valid, so save the "cs" register for later use. | |
| * | |
| * The "ip" register is truly unknown, so don't save it or fixup EIPV/RIPV. | |
| * | |
| * The Instruction Fetch Unit is at MCA bank 1 for all affected systems. | |
| */ | |
| static __always_inline void quirk_zen_ifu(int bank, struct mce *m, struct pt_regs *regs) | |
| { | |
| if (bank != 1) | |
| return; | |
| if (!(m->status & MCI_STATUS_POISON)) | |
| return; | |
| m->cs = regs->cs; | |
| } | |
| /* | |
| * Do a quick check if any of the events requires a panic. | |
| * This decides if we keep the events around or clear them. | |
| */ | |
| static __always_inline int mce_no_way_out(struct mce_hw_err *err, char **msg, unsigned long *validp, | |
| struct pt_regs *regs) | |
| { | |
| struct mce *m = &err->m; | |
| char *tmp = *msg; | |
| int i; | |
| for (i = 0; i < this_cpu_read(mce_num_banks); i++) { | |
| m->status = mce_rdmsrq(mca_msr_reg(i, MCA_STATUS)); | |
| if (!(m->status & MCI_STATUS_VAL)) | |
| continue; | |
| arch___set_bit(i, validp); | |
| if (mce_flags.snb_ifu_quirk) | |
| quirk_sandybridge_ifu(i, m, regs); | |
| if (mce_flags.zen_ifu_quirk) | |
| quirk_zen_ifu(i, m, regs); | |
| m->bank = i; | |
| if (mce_severity(m, regs, &tmp, true) >= MCE_PANIC_SEVERITY) { | |
| mce_read_aux(err, i); | |
| *msg = tmp; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Variable to establish order between CPUs while scanning. | |
| * Each CPU spins initially until executing is equal its number. | |
| */ | |
| static atomic_t mce_executing; | |
| /* | |
| * Defines order of CPUs on entry. First CPU becomes Monarch. | |
| */ | |
| static atomic_t mce_callin; | |
| /* | |
| * Track which CPUs entered the MCA broadcast synchronization and which not in | |
| * order to print holdouts. | |
| */ | |
| static cpumask_t mce_missing_cpus = CPU_MASK_ALL; | |
| /* | |
| * Check if a timeout waiting for other CPUs happened. | |
| */ | |
| static noinstr int mce_timed_out(u64 *t, const char *msg) | |
| { | |
| int ret = 0; | |
| /* Enable instrumentation around calls to external facilities */ | |
| instrumentation_begin(); | |
| /* | |
| * The others already did panic for some reason. | |
| * Bail out like in a timeout. | |
| * rmb() to tell the compiler that system_state | |
| * might have been modified by someone else. | |
| */ | |
| rmb(); | |
| if (atomic_read(&mce_panicked)) | |
| wait_for_panic(); | |
| if (!mca_cfg.monarch_timeout) | |
| goto out; | |
| if ((s64)*t < SPINUNIT) { | |
| if (cpumask_and(&mce_missing_cpus, cpu_online_mask, &mce_missing_cpus)) | |
| pr_emerg("CPUs not responding to MCE broadcast (may include false positives): %*pbl\n", | |
| cpumask_pr_args(&mce_missing_cpus)); | |
| mce_panic(msg, NULL, NULL); | |
| ret = 1; | |
| goto out; | |
| } | |
| *t -= SPINUNIT; | |
| out: | |
| touch_nmi_watchdog(); | |
| instrumentation_end(); | |
| return ret; | |
| } | |
| /* | |
| * The Monarch's reign. The Monarch is the CPU who entered | |
| * the machine check handler first. It waits for the others to | |
| * raise the exception too and then grades them. When any | |
| * error is fatal panic. Only then let the others continue. | |
| * | |
| * The other CPUs entering the MCE handler will be controlled by the | |
| * Monarch. They are called Subjects. | |
| * | |
| * This way we prevent any potential data corruption in a unrecoverable case | |
| * and also makes sure always all CPU's errors are examined. | |
| * | |
| * Also this detects the case of a machine check event coming from outer | |
| * space (not detected by any CPUs) In this case some external agent wants | |
| * us to shut down, so panic too. | |
| * | |
| * The other CPUs might still decide to panic if the handler happens | |
| * in a unrecoverable place, but in this case the system is in a semi-stable | |
| * state and won't corrupt anything by itself. It's ok to let the others | |
| * continue for a bit first. | |
| * | |
| * All the spin loops have timeouts; when a timeout happens a CPU | |
| * typically elects itself to be Monarch. | |
| */ | |
| static void mce_reign(void) | |
| { | |
| struct mce_hw_err *err = NULL; | |
| struct mce *m = NULL; | |
| int global_worst = 0; | |
| char *msg = NULL; | |
| int cpu; | |
| /* | |
| * This CPU is the Monarch and the other CPUs have run | |
| * through their handlers. | |
| * Grade the severity of the errors of all the CPUs. | |
| */ | |
| for_each_possible_cpu(cpu) { | |
| struct mce_hw_err *etmp = &per_cpu(hw_errs_seen, cpu); | |
| struct mce *mtmp = &etmp->m; | |
| if (mtmp->severity > global_worst) { | |
| global_worst = mtmp->severity; | |
| err = &per_cpu(hw_errs_seen, cpu); | |
| m = &err->m; | |
| } | |
| } | |
| /* | |
| * Cannot recover? Panic here then. | |
| * This dumps all the mces in the log buffer and stops the | |
| * other CPUs. | |
| */ | |
| if (m && global_worst >= MCE_PANIC_SEVERITY) { | |
| /* call mce_severity() to get "msg" for panic */ | |
| mce_severity(m, NULL, &msg, true); | |
| mce_panic("Fatal machine check", err, msg); | |
| } | |
| /* | |
| * For UC somewhere we let the CPU who detects it handle it. | |
| * Also must let continue the others, otherwise the handling | |
| * CPU could deadlock on a lock. | |
| */ | |
| /* | |
| * No machine check event found. Must be some external | |
| * source or one CPU is hung. Panic. | |
| */ | |
| if (global_worst <= MCE_KEEP_SEVERITY) | |
| mce_panic("Fatal machine check from unknown source", NULL, NULL); | |
| /* | |
| * Now clear all the hw_errs_seen so that they don't reappear on | |
| * the next mce. | |
| */ | |
| for_each_possible_cpu(cpu) | |
| memset(&per_cpu(hw_errs_seen, cpu), 0, sizeof(struct mce_hw_err)); | |
| } | |
| static atomic_t global_nwo; | |
| /* | |
| * Start of Monarch synchronization. This waits until all CPUs have | |
| * entered the exception handler and then determines if any of them | |
| * saw a fatal event that requires panic. Then it executes them | |
| * in the entry order. | |
| * TBD double check parallel CPU hotunplug | |
| */ | |
| static noinstr int mce_start(int *no_way_out) | |
| { | |
| u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC; | |
| int order, ret = -1; | |
| if (!timeout) | |
| return ret; | |
| raw_atomic_add(*no_way_out, &global_nwo); | |
| /* | |
| * Rely on the implied barrier below, such that global_nwo | |
| * is updated before mce_callin. | |
| */ | |
| order = raw_atomic_inc_return(&mce_callin); | |
| arch_cpumask_clear_cpu(smp_processor_id(), &mce_missing_cpus); | |
| /* Enable instrumentation around calls to external facilities */ | |
| instrumentation_begin(); | |
| /* | |
| * Wait for everyone. | |
| */ | |
| while (raw_atomic_read(&mce_callin) != num_online_cpus()) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Not all CPUs entered broadcast exception handler")) { | |
| raw_atomic_set(&global_nwo, 0); | |
| goto out; | |
| } | |
| ndelay(SPINUNIT); | |
| } | |
| /* | |
| * mce_callin should be read before global_nwo | |
| */ | |
| smp_rmb(); | |
| if (order == 1) { | |
| /* | |
| * Monarch: Starts executing now, the others wait. | |
| */ | |
| raw_atomic_set(&mce_executing, 1); | |
| } else { | |
| /* | |
| * Subject: Now start the scanning loop one by one in | |
| * the original callin order. | |
| * This way when there are any shared banks it will be | |
| * only seen by one CPU before cleared, avoiding duplicates. | |
| */ | |
| while (raw_atomic_read(&mce_executing) < order) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Subject CPUs unable to finish machine check processing")) { | |
| raw_atomic_set(&global_nwo, 0); | |
| goto out; | |
| } | |
| ndelay(SPINUNIT); | |
| } | |
| } | |
| /* | |
| * Cache the global no_way_out state. | |
| */ | |
| *no_way_out = raw_atomic_read(&global_nwo); | |
| ret = order; | |
| out: | |
| instrumentation_end(); | |
| return ret; | |
| } | |
| /* | |
| * Synchronize between CPUs after main scanning loop. | |
| * This invokes the bulk of the Monarch processing. | |
| */ | |
| static noinstr int mce_end(int order) | |
| { | |
| u64 timeout = (u64)mca_cfg.monarch_timeout * NSEC_PER_USEC; | |
| int ret = -1; | |
| /* Allow instrumentation around external facilities. */ | |
| instrumentation_begin(); | |
| if (!timeout) | |
| goto reset; | |
| if (order < 0) | |
| goto reset; | |
| /* | |
| * Allow others to run. | |
| */ | |
| atomic_inc(&mce_executing); | |
| if (order == 1) { | |
| /* | |
| * Monarch: Wait for everyone to go through their scanning | |
| * loops. | |
| */ | |
| while (atomic_read(&mce_executing) <= num_online_cpus()) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Monarch CPU unable to finish machine check processing")) | |
| goto reset; | |
| ndelay(SPINUNIT); | |
| } | |
| mce_reign(); | |
| barrier(); | |
| ret = 0; | |
| } else { | |
| /* | |
| * Subject: Wait for Monarch to finish. | |
| */ | |
| while (atomic_read(&mce_executing) != 0) { | |
| if (mce_timed_out(&timeout, | |
| "Timeout: Monarch CPU did not finish machine check processing")) | |
| goto reset; | |
| ndelay(SPINUNIT); | |
| } | |
| /* | |
| * Don't reset anything. That's done by the Monarch. | |
| */ | |
| ret = 0; | |
| goto out; | |
| } | |
| /* | |
| * Reset all global state. | |
| */ | |
| reset: | |
| atomic_set(&global_nwo, 0); | |
| atomic_set(&mce_callin, 0); | |
| cpumask_setall(&mce_missing_cpus); | |
| barrier(); | |
| /* | |
| * Let others run again. | |
| */ | |
| atomic_set(&mce_executing, 0); | |
| out: | |
| instrumentation_end(); | |
| return ret; | |
| } | |
| static __always_inline void mce_clear_state(unsigned long *toclear) | |
| { | |
| int i; | |
| for (i = 0; i < this_cpu_read(mce_num_banks); i++) { | |
| if (arch_test_bit(i, toclear)) | |
| mce_wrmsrq(mca_msr_reg(i, MCA_STATUS), 0); | |
| } | |
| } | |
| /* | |
| * Cases where we avoid rendezvous handler timeout: | |
| * 1) If this CPU is offline. | |
| * | |
| * 2) If crashing_cpu was set, e.g. we're entering kdump and we need to | |
| * skip those CPUs which remain looping in the 1st kernel - see | |
| * crash_nmi_callback(). | |
| * | |
| * Note: there still is a small window between kexec-ing and the new, | |
| * kdump kernel establishing a new #MC handler where a broadcasted MCE | |
| * might not get handled properly. | |
| */ | |
| static noinstr bool mce_check_crashing_cpu(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| if (arch_cpu_is_offline(cpu) || | |
| (crashing_cpu != -1 && crashing_cpu != cpu)) { | |
| u64 mcgstatus; | |
| mcgstatus = native_rdmsrq(MSR_IA32_MCG_STATUS); | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_ZHAOXIN) { | |
| if (mcgstatus & MCG_STATUS_LMCES) | |
| return false; | |
| } | |
| if (mcgstatus & MCG_STATUS_RIPV) { | |
| native_wrmsrq(MSR_IA32_MCG_STATUS, 0); | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| static __always_inline int | |
| __mc_scan_banks(struct mce_hw_err *err, struct pt_regs *regs, | |
| struct mce_hw_err *final, unsigned long *toclear, | |
| unsigned long *valid_banks, int no_way_out, int *worst) | |
| { | |
| struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array); | |
| struct mca_config *cfg = &mca_cfg; | |
| int severity, i, taint = 0; | |
| struct mce *m = &err->m; | |
| for (i = 0; i < this_cpu_read(mce_num_banks); i++) { | |
| arch___clear_bit(i, toclear); | |
| if (!arch_test_bit(i, valid_banks)) | |
| continue; | |
| if (!mce_banks[i].ctl) | |
| continue; | |
| m->misc = 0; | |
| m->addr = 0; | |
| m->bank = i; | |
| m->status = mce_rdmsrq(mca_msr_reg(i, MCA_STATUS)); | |
| if (!(m->status & MCI_STATUS_VAL)) | |
| continue; | |
| /* | |
| * Corrected or non-signaled errors are handled by | |
| * machine_check_poll(). Leave them alone, unless this panics. | |
| */ | |
| if (!(m->status & (cfg->ser ? MCI_STATUS_S : MCI_STATUS_UC)) && | |
| !no_way_out) | |
| continue; | |
| /* Set taint even when machine check was not enabled. */ | |
| taint++; | |
| severity = mce_severity(m, regs, NULL, true); | |
| /* | |
| * When machine check was for corrected/deferred handler don't | |
| * touch, unless we're panicking. | |
| */ | |
| if ((severity == MCE_KEEP_SEVERITY || | |
| severity == MCE_UCNA_SEVERITY) && !no_way_out) | |
| continue; | |
| arch___set_bit(i, toclear); | |
| /* Machine check event was not enabled. Clear, but ignore. */ | |
| if (severity == MCE_NO_SEVERITY) | |
| continue; | |
| mce_read_aux(err, i); | |
| /* assuming valid severity level != 0 */ | |
| m->severity = severity; | |
| /* | |
| * Enable instrumentation around the mce_log() call which is | |
| * done in #MC context, where instrumentation is disabled. | |
| */ | |
| instrumentation_begin(); | |
| mce_log(err); | |
| instrumentation_end(); | |
| if (severity > *worst) { | |
| *final = *err; | |
| *worst = severity; | |
| } | |
| } | |
| /* mce_clear_state will clear *final, save locally for use later */ | |
| *err = *final; | |
| return taint; | |
| } | |
| static void kill_me_now(struct callback_head *ch) | |
| { | |
| struct task_struct *p = container_of(ch, struct task_struct, mce_kill_me); | |
| p->mce_count = 0; | |
| force_sig(SIGBUS); | |
| } | |
| static void kill_me_maybe(struct callback_head *cb) | |
| { | |
| struct task_struct *p = container_of(cb, struct task_struct, mce_kill_me); | |
| int flags = MF_ACTION_REQUIRED; | |
| unsigned long pfn; | |
| int ret; | |
| p->mce_count = 0; | |
| pr_err("Uncorrected hardware memory error in user-access at %llx", p->mce_addr); | |
| if (!p->mce_ripv) | |
| flags |= MF_MUST_KILL; | |
| pfn = (p->mce_addr & MCI_ADDR_PHYSADDR) >> PAGE_SHIFT; | |
| ret = memory_failure(pfn, flags); | |
| if (!ret) { | |
| set_mce_nospec(pfn); | |
| sync_core(); | |
| return; | |
| } | |
| /* | |
| * -EHWPOISON from memory_failure() means that it already sent SIGBUS | |
| * to the current process with the proper error info, | |
| * -EOPNOTSUPP means hwpoison_filter() filtered the error event, | |
| * | |
| * In both cases, no further processing is required. | |
| */ | |
| if (ret == -EHWPOISON || ret == -EOPNOTSUPP) | |
| return; | |
| pr_err("Memory error not recovered"); | |
| kill_me_now(cb); | |
| } | |
| static void kill_me_never(struct callback_head *cb) | |
| { | |
| struct task_struct *p = container_of(cb, struct task_struct, mce_kill_me); | |
| unsigned long pfn; | |
| p->mce_count = 0; | |
| pr_err("Kernel accessed poison in user space at %llx\n", p->mce_addr); | |
| pfn = (p->mce_addr & MCI_ADDR_PHYSADDR) >> PAGE_SHIFT; | |
| if (!memory_failure(pfn, 0)) | |
| set_mce_nospec(pfn); | |
| } | |
| static void queue_task_work(struct mce_hw_err *err, char *msg, void (*func)(struct callback_head *)) | |
| { | |
| int count = ++current->mce_count; | |
| struct mce *m = &err->m; | |
| /* First call, save all the details */ | |
| if (count == 1) { | |
| current->mce_addr = m->addr; | |
| current->mce_kflags = m->kflags; | |
| current->mce_ripv = !!(m->mcgstatus & MCG_STATUS_RIPV); | |
| current->mce_whole_page = whole_page(m); | |
| current->mce_kill_me.func = func; | |
| } | |
| /* Ten is likely overkill. Don't expect more than two faults before task_work() */ | |
| if (count > 10) | |
| mce_panic("Too many consecutive machine checks while accessing user data", | |
| err, msg); | |
| /* Second or later call, make sure page address matches the one from first call */ | |
| if (count > 1 && (current->mce_addr >> PAGE_SHIFT) != (m->addr >> PAGE_SHIFT)) | |
| mce_panic("Consecutive machine checks to different user pages", err, msg); | |
| /* Do not call task_work_add() more than once */ | |
| if (count > 1) | |
| return; | |
| task_work_add(current, ¤t->mce_kill_me, TWA_RESUME); | |
| } | |
| /* Handle unconfigured int18 (should never happen) */ | |
| static noinstr void unexpected_machine_check(struct pt_regs *regs) | |
| { | |
| instrumentation_begin(); | |
| pr_err("CPU#%d: Unexpected int18 (Machine Check)\n", | |
| smp_processor_id()); | |
| instrumentation_end(); | |
| } | |
| /* | |
| * The actual machine check handler. This only handles real exceptions when | |
| * something got corrupted coming in through int 18. | |
| * | |
| * This is executed in #MC context not subject to normal locking rules. | |
| * This implies that most kernel services cannot be safely used. Don't even | |
| * think about putting a printk in there! | |
| * | |
| * On Intel systems this is entered on all CPUs in parallel through | |
| * MCE broadcast. However some CPUs might be broken beyond repair, | |
| * so be always careful when synchronizing with others. | |
| * | |
| * Tracing and kprobes are disabled: if we interrupted a kernel context | |
| * with IF=1, we need to minimize stack usage. There are also recursion | |
| * issues: if the machine check was due to a failure of the memory | |
| * backing the user stack, tracing that reads the user stack will cause | |
| * potentially infinite recursion. | |
| * | |
| * Currently, the #MC handler calls out to a number of external facilities | |
| * and, therefore, allows instrumentation around them. The optimal thing to | |
| * have would be to do the absolutely minimal work required in #MC context | |
| * and have instrumentation disabled only around that. Further processing can | |
| * then happen in process context where instrumentation is allowed. Achieving | |
| * that requires careful auditing and modifications. Until then, the code | |
| * allows instrumentation temporarily, where required. * | |
| */ | |
| noinstr void do_machine_check(struct pt_regs *regs) | |
| { | |
| int worst = 0, order, no_way_out, kill_current_task, lmce, taint = 0; | |
| DECLARE_BITMAP(valid_banks, MAX_NR_BANKS) = { 0 }; | |
| DECLARE_BITMAP(toclear, MAX_NR_BANKS) = { 0 }; | |
| struct mce_hw_err *final; | |
| struct mce_hw_err err; | |
| char *msg = NULL; | |
| struct mce *m; | |
| if (unlikely(mce_flags.p5)) | |
| return pentium_machine_check(regs); | |
| else if (unlikely(mce_flags.winchip)) | |
| return winchip_machine_check(regs); | |
| else if (unlikely(!mca_cfg.initialized)) | |
| return unexpected_machine_check(regs); | |
| if (mce_flags.skx_repmov_quirk && quirk_skylake_repmov()) | |
| goto clear; | |
| /* | |
| * Establish sequential order between the CPUs entering the machine | |
| * check handler. | |
| */ | |
| order = -1; | |
| /* | |
| * If no_way_out gets set, there is no safe way to recover from this | |
| * MCE. | |
| */ | |
| no_way_out = 0; | |
| /* | |
| * If kill_current_task is not set, there might be a way to recover from this | |
| * error. | |
| */ | |
| kill_current_task = 0; | |
| /* | |
| * MCEs are always local on AMD. Same is determined by MCG_STATUS_LMCES | |
| * on Intel. | |
| */ | |
| lmce = 1; | |
| inc_irq_stat(MCE_EXCEPTION); | |
| mce_gather_info(&err, regs); | |
| m = &err.m; | |
| m->tsc = rdtsc(); | |
| final = this_cpu_ptr(&hw_errs_seen); | |
| *final = err; | |
| no_way_out = mce_no_way_out(&err, &msg, valid_banks, regs); | |
| barrier(); | |
| /* | |
| * When no restart IP might need to kill or panic. | |
| * Assume the worst for now, but if we find the | |
| * severity is MCE_AR_SEVERITY we have other options. | |
| */ | |
| if (!(m->mcgstatus & MCG_STATUS_RIPV)) | |
| kill_current_task = 1; | |
| /* | |
| * Check if this MCE is signaled to only this logical processor, | |
| * on Intel, Zhaoxin only. | |
| */ | |
| if (m->cpuvendor == X86_VENDOR_INTEL || | |
| m->cpuvendor == X86_VENDOR_ZHAOXIN) | |
| lmce = m->mcgstatus & MCG_STATUS_LMCES; | |
| /* | |
| * Local machine check may already know that we have to panic. | |
| * Broadcast machine check begins rendezvous in mce_start() | |
| * Go through all banks in exclusion of the other CPUs. This way we | |
| * don't report duplicated events on shared banks because the first one | |
| * to see it will clear it. | |
| */ | |
| if (lmce) { | |
| if (no_way_out) | |
| mce_panic("Fatal local machine check", &err, msg); | |
| } else { | |
| order = mce_start(&no_way_out); | |
| } | |
| taint = __mc_scan_banks(&err, regs, final, toclear, valid_banks, no_way_out, &worst); | |
| if (!no_way_out) | |
| mce_clear_state(toclear); | |
| /* | |
| * Do most of the synchronization with other CPUs. | |
| * When there's any problem use only local no_way_out state. | |
| */ | |
| if (!lmce) { | |
| if (mce_end(order) < 0) { | |
| if (!no_way_out) | |
| no_way_out = worst >= MCE_PANIC_SEVERITY; | |
| if (no_way_out) | |
| mce_panic("Fatal machine check on current CPU", &err, msg); | |
| } | |
| } else { | |
| /* | |
| * If there was a fatal machine check we should have | |
| * already called mce_panic earlier in this function. | |
| * Since we re-read the banks, we might have found | |
| * something new. Check again to see if we found a | |
| * fatal error. We call "mce_severity()" again to | |
| * make sure we have the right "msg". | |
| */ | |
| if (worst >= MCE_PANIC_SEVERITY) { | |
| mce_severity(m, regs, &msg, true); | |
| mce_panic("Local fatal machine check!", &err, msg); | |
| } | |
| } | |
| /* | |
| * Enable instrumentation around the external facilities like task_work_add() | |
| * (via queue_task_work()), fixup_exception() etc. For now, that is. Fixing this | |
| * properly would need a lot more involved reorganization. | |
| */ | |
| instrumentation_begin(); | |
| if (taint) | |
| add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE); | |
| if (worst != MCE_AR_SEVERITY && !kill_current_task) | |
| goto out; | |
| /* Fault was in user mode and we need to take some action */ | |
| if ((m->cs & 3) == 3) { | |
| /* If this triggers there is no way to recover. Die hard. */ | |
| BUG_ON(!on_thread_stack() || !user_mode(regs)); | |
| if (!mce_usable_address(m)) | |
| queue_task_work(&err, msg, kill_me_now); | |
| else | |
| queue_task_work(&err, msg, kill_me_maybe); | |
| } else if (m->mcgstatus & MCG_STATUS_SEAM_NR) { | |
| /* | |
| * Saved RIP on stack makes it look like the machine check | |
| * was taken in the kernel on the instruction following | |
| * the entry to SEAM mode. But MCG_STATUS_SEAM_NR indicates | |
| * that the machine check was taken inside SEAM non-root | |
| * mode. CPU core has already marked that guest as dead. | |
| * It is OK for the kernel to resume execution at the | |
| * apparent point of the machine check as the fault did | |
| * not occur there. Mark the page as poisoned so it won't | |
| * be added to free list when the guest is terminated. | |
| */ | |
| if (mce_usable_address(m)) { | |
| struct page *p = pfn_to_online_page(m->addr >> PAGE_SHIFT); | |
| if (p) | |
| SetPageHWPoison(p); | |
| } | |
| } else { | |
| /* | |
| * Handle an MCE which has happened in kernel space but from | |
| * which the kernel can recover: ex_has_fault_handler() has | |
| * already verified that the rIP at which the error happened is | |
| * a rIP from which the kernel can recover (by jumping to | |
| * recovery code specified in _ASM_EXTABLE_FAULT()) and the | |
| * corresponding exception handler which would do that is the | |
| * proper one. | |
| */ | |
| if (m->kflags & MCE_IN_KERNEL_RECOV) { | |
| if (!fixup_exception(regs, X86_TRAP_MC, 0, 0)) | |
| mce_panic("Failed kernel mode recovery", &err, msg); | |
| } | |
| if (m->kflags & MCE_IN_KERNEL_COPYIN) | |
| queue_task_work(&err, msg, kill_me_never); | |
| } | |
| out: | |
| /* Given it didn't panic, mark it as recoverable */ | |
| hwerr_log_error_type(HWERR_RECOV_OTHERS); | |
| instrumentation_end(); | |
| clear: | |
| mce_wrmsrq(MSR_IA32_MCG_STATUS, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(do_machine_check); | |
| #ifndef CONFIG_MEMORY_FAILURE | |
| int memory_failure(unsigned long pfn, int flags) | |
| { | |
| /* mce_severity() should not hand us an ACTION_REQUIRED error */ | |
| BUG_ON(flags & MF_ACTION_REQUIRED); | |
| pr_err("Uncorrected memory error in page 0x%lx ignored\n" | |
| "Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n", | |
| pfn); | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * Periodic polling timer for "silent" machine check errors. If the | |
| * poller finds an MCE, poll 2x faster. When the poller finds no more | |
| * errors, poll 2x slower (up to check_interval seconds). | |
| */ | |
| static unsigned long check_interval = INITIAL_CHECK_INTERVAL; | |
| static DEFINE_PER_CPU(unsigned long, mce_next_interval); /* in jiffies */ | |
| static DEFINE_PER_CPU(struct timer_list, mce_timer); | |
| static void __start_timer(struct timer_list *t, unsigned long interval) | |
| { | |
| unsigned long when = jiffies + interval; | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| if (!timer_pending(t) || time_before(when, t->expires)) | |
| mod_timer(t, round_jiffies(when)); | |
| local_irq_restore(flags); | |
| } | |
| static void mc_poll_banks_default(void) | |
| { | |
| machine_check_poll(0, this_cpu_ptr(&mce_poll_banks)); | |
| } | |
| void (*mc_poll_banks)(void) = mc_poll_banks_default; | |
| static bool should_enable_timer(unsigned long iv) | |
| { | |
| return !mca_cfg.ignore_ce && iv; | |
| } | |
| static void mce_timer_fn(struct timer_list *t) | |
| { | |
| struct timer_list *cpu_t = this_cpu_ptr(&mce_timer); | |
| unsigned long iv; | |
| WARN_ON(cpu_t != t); | |
| iv = __this_cpu_read(mce_next_interval); | |
| if (mce_available(this_cpu_ptr(&cpu_info))) | |
| mc_poll_banks(); | |
| /* | |
| * Alert userspace if needed. If we logged an MCE, reduce the polling | |
| * interval, otherwise increase the polling interval. | |
| */ | |
| if (!mce_gen_pool_empty()) | |
| iv = max(iv / 2, (unsigned long) HZ/100); | |
| else | |
| iv = min(iv * 2, round_jiffies_relative(check_interval * HZ)); | |
| if (mce_get_storm_mode()) { | |
| __start_timer(t, HZ); | |
| } else if (should_enable_timer(iv)) { | |
| __this_cpu_write(mce_next_interval, iv); | |
| __start_timer(t, iv); | |
| } | |
| } | |
| /* | |
| * When a storm starts on any bank on this CPU, switch to polling | |
| * once per second. When the storm ends, revert to the default | |
| * polling interval. | |
| */ | |
| void mce_timer_kick(bool storm) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| mce_set_storm_mode(storm); | |
| if (storm) | |
| __start_timer(t, HZ); | |
| else | |
| __this_cpu_write(mce_next_interval, check_interval * HZ); | |
| } | |
| /* Must not be called in IRQ context where timer_delete_sync() can deadlock */ | |
| static void mce_timer_delete_all(void) | |
| { | |
| int cpu; | |
| for_each_online_cpu(cpu) | |
| timer_delete_sync(&per_cpu(mce_timer, cpu)); | |
| } | |
| static void __mcheck_cpu_mce_banks_init(void) | |
| { | |
| struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array); | |
| u8 n_banks = this_cpu_read(mce_num_banks); | |
| int i; | |
| for (i = 0; i < n_banks; i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| /* | |
| * Init them all by default. | |
| * | |
| * The required vendor quirks will be applied before | |
| * __mcheck_cpu_init_prepare_banks() does the final bank setup. | |
| */ | |
| b->ctl = -1ULL; | |
| b->init = true; | |
| } | |
| } | |
| /* | |
| * Initialize Machine Checks for a CPU. | |
| */ | |
| static void __mcheck_cpu_cap_init(void) | |
| { | |
| u64 cap; | |
| u8 b; | |
| rdmsrq(MSR_IA32_MCG_CAP, cap); | |
| b = cap & MCG_BANKCNT_MASK; | |
| if (b > MAX_NR_BANKS) { | |
| pr_warn("CPU%d: Using only %u machine check banks out of %u\n", | |
| smp_processor_id(), MAX_NR_BANKS, b); | |
| b = MAX_NR_BANKS; | |
| } | |
| this_cpu_write(mce_num_banks, b); | |
| __mcheck_cpu_mce_banks_init(); | |
| } | |
| static void __mcheck_cpu_init_generic(void) | |
| { | |
| u64 cap; | |
| rdmsrq(MSR_IA32_MCG_CAP, cap); | |
| if (cap & MCG_CTL_P) | |
| wrmsrq(MSR_IA32_MCG_CTL, ~0ULL); | |
| } | |
| static void __mcheck_cpu_init_prepare_banks(void) | |
| { | |
| struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array); | |
| u64 msrval; | |
| int i; | |
| /* | |
| * Log the machine checks left over from the previous reset. Log them | |
| * only, do not start processing them. That will happen in mcheck_late_init() | |
| * when all consumers have been registered on the notifier chain. | |
| */ | |
| if (mca_cfg.bootlog) { | |
| mce_banks_t all_banks; | |
| bitmap_fill(all_banks, MAX_NR_BANKS); | |
| machine_check_poll(MCP_UC | MCP_QUEUE_LOG, &all_banks); | |
| } | |
| for (i = 0; i < this_cpu_read(mce_num_banks); i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| if (!b->init) | |
| continue; | |
| wrmsrq(mca_msr_reg(i, MCA_CTL), b->ctl); | |
| wrmsrq(mca_msr_reg(i, MCA_STATUS), 0); | |
| rdmsrq(mca_msr_reg(i, MCA_CTL), msrval); | |
| b->init = !!msrval; | |
| } | |
| } | |
| static void amd_apply_global_quirks(struct cpuinfo_x86 *c) | |
| { | |
| if (c->x86 < 0x11 && mca_cfg.bootlog < 0) { | |
| /* | |
| * Lots of broken BIOS around that don't clear them | |
| * by default and leave crap in there. Don't log: | |
| */ | |
| mca_cfg.bootlog = 0; | |
| } | |
| /* | |
| * overflow_recov is supported for F15h Models 00h-0fh | |
| * even though we don't have a CPUID bit for it. | |
| */ | |
| if (c->x86 == 0x15 && c->x86_model <= 0xf) | |
| mce_flags.overflow_recov = 1; | |
| if (c->x86 >= 0x17 && c->x86 <= 0x1A) | |
| mce_flags.zen_ifu_quirk = 1; | |
| } | |
| static void intel_apply_global_quirks(struct cpuinfo_x86 *c) | |
| { | |
| /* Older CPUs (prior to family 6) don't need quirks. */ | |
| if (c->x86_vfm < INTEL_PENTIUM_PRO) | |
| return; | |
| /* | |
| * All newer Intel systems support MCE broadcasting. Enable | |
| * synchronization with a one second timeout. | |
| */ | |
| if (c->x86_vfm >= INTEL_CORE_YONAH && mca_cfg.monarch_timeout < 0) | |
| mca_cfg.monarch_timeout = USEC_PER_SEC; | |
| /* | |
| * There are also broken BIOSes on some Pentium M and | |
| * earlier systems: | |
| */ | |
| if (c->x86_vfm < INTEL_CORE_YONAH && mca_cfg.bootlog < 0) | |
| mca_cfg.bootlog = 0; | |
| if (c->x86_vfm == INTEL_SANDYBRIDGE_X) | |
| mce_flags.snb_ifu_quirk = 1; | |
| /* | |
| * Skylake, Cascacde Lake and Cooper Lake require a quirk on | |
| * rep movs. | |
| */ | |
| if (c->x86_vfm == INTEL_SKYLAKE_X) | |
| mce_flags.skx_repmov_quirk = 1; | |
| } | |
| static void zhaoxin_apply_global_quirks(struct cpuinfo_x86 *c) | |
| { | |
| /* | |
| * All newer Zhaoxin CPUs support MCE broadcasting. Enable | |
| * synchronization with a one second timeout. | |
| */ | |
| if (c->x86 > 6 || (c->x86_model == 0x19 || c->x86_model == 0x1f)) { | |
| if (mca_cfg.monarch_timeout < 0) | |
| mca_cfg.monarch_timeout = USEC_PER_SEC; | |
| } | |
| } | |
| static bool __mcheck_cpu_ancient_init(struct cpuinfo_x86 *c) | |
| { | |
| if (c->x86 != 5) | |
| return false; | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_INTEL: | |
| intel_p5_mcheck_init(c); | |
| mce_flags.p5 = 1; | |
| return true; | |
| case X86_VENDOR_CENTAUR: | |
| winchip_mcheck_init(c); | |
| mce_flags.winchip = 1; | |
| return true; | |
| default: | |
| return false; | |
| } | |
| return false; | |
| } | |
| static void mce_centaur_feature_init(struct cpuinfo_x86 *c) | |
| { | |
| struct mca_config *cfg = &mca_cfg; | |
| /* | |
| * All newer Centaur CPUs support MCE broadcasting. Enable | |
| * synchronization with a one second timeout. | |
| */ | |
| if ((c->x86 == 6 && c->x86_model == 0xf && c->x86_stepping >= 0xe) || | |
| c->x86 > 6) { | |
| if (cfg->monarch_timeout < 0) | |
| cfg->monarch_timeout = USEC_PER_SEC; | |
| } | |
| } | |
| static void mce_zhaoxin_feature_init(struct cpuinfo_x86 *c) | |
| { | |
| struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array); | |
| /* | |
| * These CPUs have MCA bank 8 which reports only one error type called | |
| * SVAD (System View Address Decoder). The reporting of that error is | |
| * controlled by IA32_MC8.CTL.0. | |
| * | |
| * If enabled, prefetching on these CPUs will cause SVAD MCE when | |
| * virtual machines start and result in a system panic. Always disable | |
| * bank 8 SVAD error by default. | |
| */ | |
| if ((c->x86 == 7 && c->x86_model == 0x1b) || | |
| (c->x86_model == 0x19 || c->x86_model == 0x1f)) { | |
| if (this_cpu_read(mce_num_banks) > 8) | |
| mce_banks[8].ctl = 0; | |
| } | |
| intel_init_cmci(); | |
| intel_init_lmce(); | |
| } | |
| static void mce_zhaoxin_feature_clear(struct cpuinfo_x86 *c) | |
| { | |
| intel_clear_lmce(); | |
| } | |
| static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c) | |
| { | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_INTEL: | |
| mce_intel_feature_init(c); | |
| break; | |
| case X86_VENDOR_AMD: | |
| case X86_VENDOR_HYGON: | |
| mce_amd_feature_init(c); | |
| break; | |
| case X86_VENDOR_CENTAUR: | |
| mce_centaur_feature_init(c); | |
| break; | |
| case X86_VENDOR_ZHAOXIN: | |
| mce_zhaoxin_feature_init(c); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void __mcheck_cpu_clear_vendor(struct cpuinfo_x86 *c) | |
| { | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_INTEL: | |
| mce_intel_feature_clear(c); | |
| break; | |
| case X86_VENDOR_ZHAOXIN: | |
| mce_zhaoxin_feature_clear(c); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void mce_start_timer(struct timer_list *t) | |
| { | |
| unsigned long iv = check_interval * HZ; | |
| if (should_enable_timer(iv)) { | |
| this_cpu_write(mce_next_interval, iv); | |
| __start_timer(t, iv); | |
| } | |
| } | |
| static void __mcheck_cpu_setup_timer(void) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| timer_setup(t, mce_timer_fn, TIMER_PINNED); | |
| } | |
| static void __mcheck_cpu_init_timer(void) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| timer_setup(t, mce_timer_fn, TIMER_PINNED); | |
| mce_start_timer(t); | |
| } | |
| bool filter_mce(struct mce *m) | |
| { | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) | |
| return amd_filter_mce(m); | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) | |
| return intel_filter_mce(m); | |
| return false; | |
| } | |
| static __always_inline void exc_machine_check_kernel(struct pt_regs *regs) | |
| { | |
| irqentry_state_t irq_state; | |
| unsigned long dr7; | |
| dr7 = local_db_save(); | |
| WARN_ON_ONCE(user_mode(regs)); | |
| /* | |
| * Only required when from kernel mode. See | |
| * mce_check_crashing_cpu() for details. | |
| */ | |
| if (mca_cfg.initialized && mce_check_crashing_cpu()) | |
| goto out; | |
| irq_state = irqentry_nmi_enter(regs); | |
| do_machine_check(regs); | |
| irqentry_nmi_exit(regs, irq_state); | |
| out: | |
| local_db_restore(dr7); | |
| } | |
| static __always_inline void exc_machine_check_user(struct pt_regs *regs) | |
| { | |
| unsigned long dr7; | |
| irqentry_enter_from_user_mode(regs); | |
| dr7 = local_db_save(); | |
| do_machine_check(regs); | |
| local_db_restore(dr7); | |
| irqentry_exit_to_user_mode(regs); | |
| } | |
| #ifdef CONFIG_X86_64 | |
| /* MCE hit kernel mode */ | |
| DEFINE_IDTENTRY_MCE(exc_machine_check) | |
| { | |
| exc_machine_check_kernel(regs); | |
| } | |
| /* The user mode variant. */ | |
| DEFINE_IDTENTRY_MCE_USER(exc_machine_check) | |
| { | |
| exc_machine_check_user(regs); | |
| } | |
| #ifdef CONFIG_X86_FRED | |
| /* | |
| * When occurred on different ring level, i.e., from user or kernel | |
| * context, #MCE needs to be handled on different stack: User #MCE | |
| * on current task stack, while kernel #MCE on a dedicated stack. | |
| * | |
| * This is exactly how FRED event delivery invokes an exception | |
| * handler: ring 3 event on level 0 stack, i.e., current task stack; | |
| * ring 0 event on the #MCE dedicated stack specified in the | |
| * IA32_FRED_STKLVLS MSR. So unlike IDT, the FRED machine check entry | |
| * stub doesn't do stack switch. | |
| */ | |
| DEFINE_FREDENTRY_MCE(exc_machine_check) | |
| { | |
| if (user_mode(regs)) | |
| exc_machine_check_user(regs); | |
| else | |
| exc_machine_check_kernel(regs); | |
| } | |
| #endif | |
| #else | |
| /* 32bit unified entry point */ | |
| DEFINE_IDTENTRY_RAW(exc_machine_check) | |
| { | |
| if (user_mode(regs)) | |
| exc_machine_check_user(regs); | |
| else | |
| exc_machine_check_kernel(regs); | |
| } | |
| #endif | |
| void mca_bsp_init(struct cpuinfo_x86 *c) | |
| { | |
| u64 cap; | |
| if (!mce_available(c)) | |
| return; | |
| if (c->x86_vendor == X86_VENDOR_UNKNOWN) { | |
| mca_cfg.disabled = 1; | |
| pr_info("unknown CPU type - not enabling MCE support\n"); | |
| return; | |
| } | |
| mce_flags.overflow_recov = cpu_feature_enabled(X86_FEATURE_OVERFLOW_RECOV); | |
| mce_flags.succor = cpu_feature_enabled(X86_FEATURE_SUCCOR); | |
| mce_flags.smca = cpu_feature_enabled(X86_FEATURE_SMCA); | |
| if (mce_flags.smca) | |
| smca_bsp_init(); | |
| rdmsrq(MSR_IA32_MCG_CAP, cap); | |
| /* Use accurate RIP reporting if available. */ | |
| if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9) | |
| mca_cfg.rip_msr = MSR_IA32_MCG_EIP; | |
| if (cap & MCG_SER_P) | |
| mca_cfg.ser = 1; | |
| switch (c->x86_vendor) { | |
| case X86_VENDOR_AMD: | |
| amd_apply_global_quirks(c); | |
| break; | |
| case X86_VENDOR_INTEL: | |
| intel_apply_global_quirks(c); | |
| break; | |
| case X86_VENDOR_ZHAOXIN: | |
| zhaoxin_apply_global_quirks(c); | |
| break; | |
| } | |
| if (mca_cfg.monarch_timeout < 0) | |
| mca_cfg.monarch_timeout = 0; | |
| if (mca_cfg.bootlog != 0) | |
| mca_cfg.panic_timeout = 30; | |
| } | |
| /* | |
| * Called for each booted CPU to set up machine checks. | |
| * Must be called with preempt off: | |
| */ | |
| void mcheck_cpu_init(struct cpuinfo_x86 *c) | |
| { | |
| if (mca_cfg.disabled) | |
| return; | |
| if (__mcheck_cpu_ancient_init(c)) | |
| return; | |
| if (!mce_available(c)) | |
| return; | |
| __mcheck_cpu_cap_init(); | |
| if (!mce_gen_pool_init()) { | |
| mca_cfg.disabled = 1; | |
| pr_emerg("Couldn't allocate MCE records pool!\n"); | |
| return; | |
| } | |
| mca_cfg.initialized = 1; | |
| __mcheck_cpu_setup_timer(); | |
| __mcheck_cpu_init_generic(); | |
| __mcheck_cpu_init_vendor(c); | |
| __mcheck_cpu_init_prepare_banks(); | |
| cr4_set_bits(X86_CR4_MCE); | |
| } | |
| /* | |
| * Called for each booted CPU to clear some machine checks opt-ins | |
| */ | |
| void mcheck_cpu_clear(struct cpuinfo_x86 *c) | |
| { | |
| if (mca_cfg.disabled) | |
| return; | |
| if (!mce_available(c)) | |
| return; | |
| /* | |
| * Possibly to clear general settings generic to x86 | |
| * __mcheck_cpu_clear_generic(c); | |
| */ | |
| __mcheck_cpu_clear_vendor(c); | |
| } | |
| static void __mce_disable_bank(void *arg) | |
| { | |
| int bank = *((int *)arg); | |
| __clear_bit(bank, this_cpu_ptr(mce_poll_banks)); | |
| cmci_disable_bank(bank); | |
| } | |
| void mce_disable_bank(int bank) | |
| { | |
| if (bank >= this_cpu_read(mce_num_banks)) { | |
| pr_warn(FW_BUG | |
| "Ignoring request to disable invalid MCA bank %d.\n", | |
| bank); | |
| return; | |
| } | |
| set_bit(bank, mce_banks_ce_disabled); | |
| on_each_cpu(__mce_disable_bank, &bank, 1); | |
| } | |
| /* | |
| * mce=off Disables machine check | |
| * mce=no_cmci Disables CMCI | |
| * mce=no_lmce Disables LMCE | |
| * mce=dont_log_ce Clears corrected events silently, no log created for CEs. | |
| * mce=print_all Print all machine check logs to console | |
| * mce=ignore_ce Disables polling and CMCI, corrected events are not cleared. | |
| * mce=TOLERANCELEVEL[,monarchtimeout] (number, see above) | |
| * monarchtimeout is how long to wait for other CPUs on machine | |
| * check, or 0 to not wait | |
| * mce=bootlog Log MCEs from before booting. Disabled by default on AMD Fam10h | |
| and older. | |
| * mce=nobootlog Don't log MCEs from before booting. | |
| * mce=bios_cmci_threshold Don't program the CMCI threshold | |
| * mce=recovery force enable copy_mc_fragile() | |
| */ | |
| static int __init mcheck_enable(char *str) | |
| { | |
| struct mca_config *cfg = &mca_cfg; | |
| if (*str == 0) { | |
| enable_p5_mce(); | |
| return 1; | |
| } | |
| if (*str == '=') | |
| str++; | |
| if (!strcmp(str, "off")) | |
| cfg->disabled = 1; | |
| else if (!strcmp(str, "no_cmci")) | |
| cfg->cmci_disabled = true; | |
| else if (!strcmp(str, "no_lmce")) | |
| cfg->lmce_disabled = 1; | |
| else if (!strcmp(str, "dont_log_ce")) | |
| cfg->dont_log_ce = true; | |
| else if (!strcmp(str, "print_all")) | |
| cfg->print_all = true; | |
| else if (!strcmp(str, "ignore_ce")) | |
| cfg->ignore_ce = true; | |
| else if (!strcmp(str, "bootlog") || !strcmp(str, "nobootlog")) | |
| cfg->bootlog = (str[0] == 'b'); | |
| else if (!strcmp(str, "bios_cmci_threshold")) | |
| cfg->bios_cmci_threshold = 1; | |
| else if (!strcmp(str, "recovery")) | |
| cfg->recovery = 1; | |
| else if (isdigit(str[0])) | |
| get_option(&str, &(cfg->monarch_timeout)); | |
| else { | |
| pr_info("mce argument %s ignored. Please use /sys\n", str); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| __setup("mce", mcheck_enable); | |
| int __init mcheck_init(void) | |
| { | |
| mce_register_decode_chain(&early_nb); | |
| mce_register_decode_chain(&mce_uc_nb); | |
| mce_register_decode_chain(&mce_default_nb); | |
| INIT_WORK(&mce_work, mce_gen_pool_process); | |
| init_irq_work(&mce_irq_work, mce_irq_work_cb); | |
| return 0; | |
| } | |
| /* | |
| * mce_syscore: PM support | |
| */ | |
| /* | |
| * Disable machine checks on suspend and shutdown. We can't really handle | |
| * them later. | |
| */ | |
| static void mce_disable_error_reporting(void) | |
| { | |
| struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array); | |
| int i; | |
| for (i = 0; i < this_cpu_read(mce_num_banks); i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| if (b->init) | |
| wrmsrq(mca_msr_reg(i, MCA_CTL), 0); | |
| } | |
| return; | |
| } | |
| static void vendor_disable_error_reporting(void) | |
| { | |
| /* | |
| * Don't clear on Intel or AMD or Hygon or Zhaoxin CPUs. Some of these | |
| * MSRs are socket-wide. Disabling them for just a single offlined CPU | |
| * is bad, since it will inhibit reporting for all shared resources on | |
| * the socket like the last level cache (LLC), the integrated memory | |
| * controller (iMC), etc. | |
| */ | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL || | |
| boot_cpu_data.x86_vendor == X86_VENDOR_HYGON || | |
| boot_cpu_data.x86_vendor == X86_VENDOR_AMD || | |
| boot_cpu_data.x86_vendor == X86_VENDOR_ZHAOXIN) | |
| return; | |
| mce_disable_error_reporting(); | |
| } | |
| static int mce_syscore_suspend(void *data) | |
| { | |
| vendor_disable_error_reporting(); | |
| return 0; | |
| } | |
| static void mce_syscore_shutdown(void *data) | |
| { | |
| vendor_disable_error_reporting(); | |
| } | |
| /* | |
| * On resume clear all MCE state. Don't want to see leftovers from the BIOS. | |
| * Only one CPU is active at this time, the others get re-added later using | |
| * CPU hotplug: | |
| */ | |
| static void mce_syscore_resume(void *data) | |
| { | |
| __mcheck_cpu_init_generic(); | |
| __mcheck_cpu_init_vendor(raw_cpu_ptr(&cpu_info)); | |
| __mcheck_cpu_init_prepare_banks(); | |
| cr4_set_bits(X86_CR4_MCE); | |
| } | |
| static const struct syscore_ops mce_syscore_ops = { | |
| .suspend = mce_syscore_suspend, | |
| .shutdown = mce_syscore_shutdown, | |
| .resume = mce_syscore_resume, | |
| }; | |
| static struct syscore mce_syscore = { | |
| .ops = &mce_syscore_ops, | |
| }; | |
| /* | |
| * mce_device: Sysfs support | |
| */ | |
| static void mce_cpu_restart(void *data) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| __mcheck_cpu_init_generic(); | |
| __mcheck_cpu_init_prepare_banks(); | |
| __mcheck_cpu_init_timer(); | |
| cr4_set_bits(X86_CR4_MCE); | |
| } | |
| /* Reinit MCEs after user configuration changes */ | |
| static void mce_restart(void) | |
| { | |
| mce_timer_delete_all(); | |
| on_each_cpu(mce_cpu_restart, NULL, 1); | |
| mce_schedule_work(); | |
| } | |
| /* Toggle features for corrected errors */ | |
| static void mce_disable_cmci(void *data) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| cmci_clear(); | |
| } | |
| static void mce_enable_ce(void *all) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| cmci_reenable(); | |
| cmci_recheck(); | |
| if (all) | |
| __mcheck_cpu_init_timer(); | |
| } | |
| static const struct bus_type mce_subsys = { | |
| .name = "machinecheck", | |
| .dev_name = "machinecheck", | |
| }; | |
| DEFINE_PER_CPU(struct device *, mce_device); | |
| static inline struct mce_bank_dev *attr_to_bank(struct device_attribute *attr) | |
| { | |
| return container_of(attr, struct mce_bank_dev, attr); | |
| } | |
| static ssize_t show_bank(struct device *s, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| u8 bank = attr_to_bank(attr)->bank; | |
| struct mce_bank *b; | |
| if (bank >= per_cpu(mce_num_banks, s->id)) | |
| return -EINVAL; | |
| b = &per_cpu(mce_banks_array, s->id)[bank]; | |
| if (!b->init) | |
| return -ENODEV; | |
| return sprintf(buf, "%llx\n", b->ctl); | |
| } | |
| static ssize_t set_bank(struct device *s, struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| u8 bank = attr_to_bank(attr)->bank; | |
| struct mce_bank *b; | |
| u64 new; | |
| if (kstrtou64(buf, 0, &new) < 0) | |
| return -EINVAL; | |
| if (bank >= per_cpu(mce_num_banks, s->id)) | |
| return -EINVAL; | |
| b = &per_cpu(mce_banks_array, s->id)[bank]; | |
| if (!b->init) | |
| return -ENODEV; | |
| b->ctl = new; | |
| mutex_lock(&mce_sysfs_mutex); | |
| mce_restart(); | |
| mutex_unlock(&mce_sysfs_mutex); | |
| return size; | |
| } | |
| static ssize_t set_ignore_ce(struct device *s, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| u64 new; | |
| if (kstrtou64(buf, 0, &new) < 0) | |
| return -EINVAL; | |
| mutex_lock(&mce_sysfs_mutex); | |
| if (mca_cfg.ignore_ce ^ !!new) { | |
| if (new) { | |
| /* disable ce features */ | |
| mce_timer_delete_all(); | |
| on_each_cpu(mce_disable_cmci, NULL, 1); | |
| mca_cfg.ignore_ce = true; | |
| } else { | |
| /* enable ce features */ | |
| mca_cfg.ignore_ce = false; | |
| on_each_cpu(mce_enable_ce, (void *)1, 1); | |
| } | |
| } | |
| mutex_unlock(&mce_sysfs_mutex); | |
| return size; | |
| } | |
| static ssize_t set_cmci_disabled(struct device *s, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| u64 new; | |
| if (kstrtou64(buf, 0, &new) < 0) | |
| return -EINVAL; | |
| mutex_lock(&mce_sysfs_mutex); | |
| if (mca_cfg.cmci_disabled ^ !!new) { | |
| if (new) { | |
| /* disable cmci */ | |
| on_each_cpu(mce_disable_cmci, NULL, 1); | |
| mca_cfg.cmci_disabled = true; | |
| } else { | |
| /* enable cmci */ | |
| mca_cfg.cmci_disabled = false; | |
| on_each_cpu(mce_enable_ce, NULL, 1); | |
| } | |
| } | |
| mutex_unlock(&mce_sysfs_mutex); | |
| return size; | |
| } | |
| static ssize_t store_int_with_restart(struct device *s, | |
| struct device_attribute *attr, | |
| const char *buf, size_t size) | |
| { | |
| unsigned long old_check_interval = check_interval; | |
| ssize_t ret = device_store_ulong(s, attr, buf, size); | |
| if (check_interval == old_check_interval) | |
| return ret; | |
| mutex_lock(&mce_sysfs_mutex); | |
| mce_restart(); | |
| mutex_unlock(&mce_sysfs_mutex); | |
| return ret; | |
| } | |
| static DEVICE_INT_ATTR(monarch_timeout, 0644, mca_cfg.monarch_timeout); | |
| static DEVICE_BOOL_ATTR(dont_log_ce, 0644, mca_cfg.dont_log_ce); | |
| static DEVICE_BOOL_ATTR(print_all, 0644, mca_cfg.print_all); | |
| static struct dev_ext_attribute dev_attr_check_interval = { | |
| __DEVICE_ATTR(check_interval, 0644, device_show_int, store_int_with_restart), | |
| &check_interval | |
| }; | |
| static struct dev_ext_attribute dev_attr_ignore_ce = { | |
| __DEVICE_ATTR(ignore_ce, 0644, device_show_bool, set_ignore_ce), | |
| &mca_cfg.ignore_ce | |
| }; | |
| static struct dev_ext_attribute dev_attr_cmci_disabled = { | |
| __DEVICE_ATTR(cmci_disabled, 0644, device_show_bool, set_cmci_disabled), | |
| &mca_cfg.cmci_disabled | |
| }; | |
| static struct device_attribute *mce_device_attrs[] = { | |
| &dev_attr_check_interval.attr, | |
| #ifdef CONFIG_X86_MCELOG_LEGACY | |
| &dev_attr_trigger, | |
| #endif | |
| &dev_attr_monarch_timeout.attr, | |
| &dev_attr_dont_log_ce.attr, | |
| &dev_attr_print_all.attr, | |
| &dev_attr_ignore_ce.attr, | |
| &dev_attr_cmci_disabled.attr, | |
| NULL | |
| }; | |
| static cpumask_var_t mce_device_initialized; | |
| static void mce_device_release(struct device *dev) | |
| { | |
| kfree(dev); | |
| } | |
| /* Per CPU device init. All of the CPUs still share the same bank device: */ | |
| static int mce_device_create(unsigned int cpu) | |
| { | |
| struct device *dev; | |
| int err; | |
| int i, j; | |
| dev = per_cpu(mce_device, cpu); | |
| if (dev) | |
| return 0; | |
| dev = kzalloc_obj(*dev); | |
| if (!dev) | |
| return -ENOMEM; | |
| dev->id = cpu; | |
| dev->bus = &mce_subsys; | |
| dev->release = &mce_device_release; | |
| err = device_register(dev); | |
| if (err) { | |
| put_device(dev); | |
| return err; | |
| } | |
| for (i = 0; mce_device_attrs[i]; i++) { | |
| err = device_create_file(dev, mce_device_attrs[i]); | |
| if (err) | |
| goto error; | |
| } | |
| for (j = 0; j < per_cpu(mce_num_banks, cpu); j++) { | |
| err = device_create_file(dev, &mce_bank_devs[j].attr); | |
| if (err) | |
| goto error2; | |
| } | |
| cpumask_set_cpu(cpu, mce_device_initialized); | |
| per_cpu(mce_device, cpu) = dev; | |
| return 0; | |
| error2: | |
| while (--j >= 0) | |
| device_remove_file(dev, &mce_bank_devs[j].attr); | |
| error: | |
| while (--i >= 0) | |
| device_remove_file(dev, mce_device_attrs[i]); | |
| device_unregister(dev); | |
| return err; | |
| } | |
| static void mce_device_remove(unsigned int cpu) | |
| { | |
| struct device *dev = per_cpu(mce_device, cpu); | |
| int i; | |
| if (!cpumask_test_cpu(cpu, mce_device_initialized)) | |
| return; | |
| for (i = 0; mce_device_attrs[i]; i++) | |
| device_remove_file(dev, mce_device_attrs[i]); | |
| for (i = 0; i < per_cpu(mce_num_banks, cpu); i++) | |
| device_remove_file(dev, &mce_bank_devs[i].attr); | |
| device_unregister(dev); | |
| cpumask_clear_cpu(cpu, mce_device_initialized); | |
| per_cpu(mce_device, cpu) = NULL; | |
| } | |
| /* Make sure there are no machine checks on offlined CPUs. */ | |
| static void mce_disable_cpu(void) | |
| { | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| if (!cpuhp_tasks_frozen) | |
| cmci_clear(); | |
| vendor_disable_error_reporting(); | |
| } | |
| static void mce_reenable_cpu(void) | |
| { | |
| struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array); | |
| int i; | |
| if (!mce_available(raw_cpu_ptr(&cpu_info))) | |
| return; | |
| if (!cpuhp_tasks_frozen) | |
| cmci_reenable(); | |
| for (i = 0; i < this_cpu_read(mce_num_banks); i++) { | |
| struct mce_bank *b = &mce_banks[i]; | |
| if (b->init) | |
| wrmsrq(mca_msr_reg(i, MCA_CTL), b->ctl); | |
| } | |
| } | |
| static int mce_cpu_dead(unsigned int cpu) | |
| { | |
| /* intentionally ignoring frozen here */ | |
| if (!cpuhp_tasks_frozen) | |
| cmci_rediscover(); | |
| return 0; | |
| } | |
| static int mce_cpu_online(unsigned int cpu) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| mce_device_create(cpu); | |
| mce_threshold_create_device(cpu); | |
| mce_reenable_cpu(); | |
| mce_start_timer(t); | |
| return 0; | |
| } | |
| static int mce_cpu_pre_down(unsigned int cpu) | |
| { | |
| struct timer_list *t = this_cpu_ptr(&mce_timer); | |
| mce_disable_cpu(); | |
| timer_delete_sync(t); | |
| mce_threshold_remove_device(cpu); | |
| mce_device_remove(cpu); | |
| return 0; | |
| } | |
| static __init void mce_init_banks(void) | |
| { | |
| int i; | |
| for (i = 0; i < MAX_NR_BANKS; i++) { | |
| struct mce_bank_dev *b = &mce_bank_devs[i]; | |
| struct device_attribute *a = &b->attr; | |
| b->bank = i; | |
| sysfs_attr_init(&a->attr); | |
| a->attr.name = b->attrname; | |
| snprintf(b->attrname, ATTR_LEN, "bank%d", i); | |
| a->attr.mode = 0644; | |
| a->show = show_bank; | |
| a->store = set_bank; | |
| } | |
| } | |
| /* | |
| * When running on XEN, this initcall is ordered against the XEN mcelog | |
| * initcall: | |
| * | |
| * device_initcall(xen_late_init_mcelog); | |
| * device_initcall_sync(mcheck_init_device); | |
| */ | |
| static __init int mcheck_init_device(void) | |
| { | |
| int err; | |
| /* | |
| * Check if we have a spare virtual bit. This will only become | |
| * a problem if/when we move beyond 5-level page tables. | |
| */ | |
| MAYBE_BUILD_BUG_ON(__VIRTUAL_MASK_SHIFT >= 63); | |
| if (!mce_available(&boot_cpu_data)) { | |
| err = -EIO; | |
| goto err_out; | |
| } | |
| if (!zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL)) { | |
| err = -ENOMEM; | |
| goto err_out; | |
| } | |
| mce_init_banks(); | |
| err = subsys_system_register(&mce_subsys, NULL); | |
| if (err) | |
| goto err_out_mem; | |
| err = cpuhp_setup_state(CPUHP_X86_MCE_DEAD, "x86/mce:dead", NULL, | |
| mce_cpu_dead); | |
| if (err) | |
| goto err_out_mem; | |
| /* | |
| * Invokes mce_cpu_online() on all CPUs which are online when | |
| * the state is installed. | |
| */ | |
| err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/mce:online", | |
| mce_cpu_online, mce_cpu_pre_down); | |
| if (err < 0) | |
| goto err_out_online; | |
| register_syscore(&mce_syscore); | |
| return 0; | |
| err_out_online: | |
| cpuhp_remove_state(CPUHP_X86_MCE_DEAD); | |
| err_out_mem: | |
| free_cpumask_var(mce_device_initialized); | |
| err_out: | |
| pr_err("Unable to init MCE device (rc: %d)\n", err); | |
| return err; | |
| } | |
| device_initcall_sync(mcheck_init_device); | |
| /* | |
| * Old style boot options parsing. Only for compatibility. | |
| */ | |
| static int __init mcheck_disable(char *str) | |
| { | |
| mca_cfg.disabled = 1; | |
| return 1; | |
| } | |
| __setup("nomce", mcheck_disable); | |
| #ifdef CONFIG_DEBUG_FS | |
| struct dentry *mce_get_debugfs_dir(void) | |
| { | |
| static struct dentry *dmce; | |
| if (!dmce) | |
| dmce = debugfs_create_dir("mce", NULL); | |
| return dmce; | |
| } | |
| static void mce_reset(void) | |
| { | |
| atomic_set(&mce_fake_panicked, 0); | |
| atomic_set(&mce_executing, 0); | |
| atomic_set(&mce_callin, 0); | |
| atomic_set(&global_nwo, 0); | |
| cpumask_setall(&mce_missing_cpus); | |
| } | |
| static int fake_panic_get(void *data, u64 *val) | |
| { | |
| *val = fake_panic; | |
| return 0; | |
| } | |
| static int fake_panic_set(void *data, u64 val) | |
| { | |
| mce_reset(); | |
| fake_panic = val; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fake_panic_fops, fake_panic_get, fake_panic_set, | |
| "%llu\n"); | |
| static void __init mcheck_debugfs_init(void) | |
| { | |
| struct dentry *dmce; | |
| dmce = mce_get_debugfs_dir(); | |
| debugfs_create_file_unsafe("fake_panic", 0444, dmce, NULL, | |
| &fake_panic_fops); | |
| } | |
| #else | |
| static void __init mcheck_debugfs_init(void) { } | |
| #endif | |
| static int __init mcheck_late_init(void) | |
| { | |
| if (mca_cfg.recovery) | |
| enable_copy_mc_fragile(); | |
| mcheck_debugfs_init(); | |
| /* | |
| * Flush out everything that has been logged during early boot, now that | |
| * everything has been initialized (workqueues, decoders, ...). | |
| */ | |
| mce_schedule_work(); | |
| return 0; | |
| } | |
| late_initcall(mcheck_late_init); |