| /* | |
| * Copyright 2022 Advanced Micro Devices, Inc. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in | |
| * all copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR | |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, | |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
| * OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: AMD | |
| * | |
| */ | |
| /* FILE POLICY AND INTENDED USAGE: | |
| * This file manages link detection states and receiver states by using various | |
| * link protocols. It also provides helper functions to interpret certain | |
| * capabilities or status based on the states it manages or retrieve them | |
| * directly from connected receivers. | |
| */ | |
| #include "link_dpms.h" | |
| #include "link_detection.h" | |
| #include "link_hwss.h" | |
| #include "protocols/link_edp_panel_control.h" | |
| #include "protocols/link_ddc.h" | |
| #include "protocols/link_hpd.h" | |
| #include "protocols/link_dpcd.h" | |
| #include "protocols/link_dp_capability.h" | |
| #include "protocols/link_dp_dpia.h" | |
| #include "protocols/link_dp_phy.h" | |
| #include "protocols/link_dp_training.h" | |
| #include "protocols/link_hdmi_frl.h" | |
| #include "protocols/link_dp_dpia_bw.h" | |
| #include "accessories/link_dp_trace.h" | |
| #include "link_enc_cfg.h" | |
| #include "dm_helpers.h" | |
| #include "clk_mgr.h" | |
| // Offset DPCD 050Eh == 0x5A | |
| #define MST_HUB_ID_0x5A 0x5A | |
| #define DC_LOGGER \ | |
| link->ctx->logger | |
| #define DC_LOGGER_INIT(logger) | |
| #define LINK_INFO(...) \ | |
| DC_LOG_HW_HOTPLUG( \ | |
| __VA_ARGS__) | |
| /* | |
| * Some receivers fail to train on first try and are good | |
| * on subsequent tries. 2 retries should be plenty. If we | |
| * don't have a successful training then we don't expect to | |
| * ever get one. | |
| */ | |
| #define LINK_TRAINING_MAX_VERIFY_RETRY 2 | |
| static const u8 DP_SINK_BRANCH_DEV_NAME_7580[] = "7580\x80u"; | |
| static const u8 dp_hdmi_dongle_signature_str[] = "DP-HDMI ADAPTOR"; | |
| static enum ddc_transaction_type get_ddc_transaction_type(enum signal_type sink_signal) | |
| { | |
| enum ddc_transaction_type transaction_type = DDC_TRANSACTION_TYPE_NONE; | |
| switch (sink_signal) { | |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: | |
| case SIGNAL_TYPE_DVI_DUAL_LINK: | |
| case SIGNAL_TYPE_HDMI_TYPE_A: | |
| case SIGNAL_TYPE_HDMI_FRL: | |
| case SIGNAL_TYPE_LVDS: | |
| case SIGNAL_TYPE_RGB: | |
| transaction_type = DDC_TRANSACTION_TYPE_I2C; | |
| break; | |
| case SIGNAL_TYPE_DISPLAY_PORT: | |
| case SIGNAL_TYPE_EDP: | |
| transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; | |
| break; | |
| case SIGNAL_TYPE_DISPLAY_PORT_MST: | |
| /* MST does not use I2COverAux, but there is the | |
| * SPECIAL use case for "immediate dwnstrm device | |
| * access" (EPR#370830). | |
| */ | |
| transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; | |
| break; | |
| default: | |
| break; | |
| } | |
| return transaction_type; | |
| } | |
| static enum signal_type get_basic_signal_type(struct graphics_object_id encoder, | |
| struct graphics_object_id downstream) | |
| { | |
| if (downstream.type == OBJECT_TYPE_CONNECTOR) { | |
| switch (downstream.id) { | |
| case CONNECTOR_ID_SINGLE_LINK_DVII: | |
| switch (encoder.id) { | |
| case ENCODER_ID_INTERNAL_DAC1: | |
| case ENCODER_ID_INTERNAL_KLDSCP_DAC1: | |
| case ENCODER_ID_INTERNAL_DAC2: | |
| case ENCODER_ID_INTERNAL_KLDSCP_DAC2: | |
| return SIGNAL_TYPE_RGB; | |
| default: | |
| return SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| } | |
| break; | |
| case CONNECTOR_ID_DUAL_LINK_DVII: | |
| { | |
| switch (encoder.id) { | |
| case ENCODER_ID_INTERNAL_DAC1: | |
| case ENCODER_ID_INTERNAL_KLDSCP_DAC1: | |
| case ENCODER_ID_INTERNAL_DAC2: | |
| case ENCODER_ID_INTERNAL_KLDSCP_DAC2: | |
| return SIGNAL_TYPE_RGB; | |
| default: | |
| return SIGNAL_TYPE_DVI_DUAL_LINK; | |
| } | |
| } | |
| break; | |
| case CONNECTOR_ID_SINGLE_LINK_DVID: | |
| return SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| case CONNECTOR_ID_DUAL_LINK_DVID: | |
| return SIGNAL_TYPE_DVI_DUAL_LINK; | |
| case CONNECTOR_ID_VGA: | |
| return SIGNAL_TYPE_RGB; | |
| case CONNECTOR_ID_HDMI_TYPE_A: | |
| return SIGNAL_TYPE_HDMI_TYPE_A; | |
| case CONNECTOR_ID_LVDS: | |
| return SIGNAL_TYPE_LVDS; | |
| case CONNECTOR_ID_DISPLAY_PORT: | |
| case CONNECTOR_ID_USBC: | |
| return SIGNAL_TYPE_DISPLAY_PORT; | |
| case CONNECTOR_ID_EDP: | |
| return SIGNAL_TYPE_EDP; | |
| default: | |
| return SIGNAL_TYPE_NONE; | |
| } | |
| } | |
| return SIGNAL_TYPE_NONE; | |
| } | |
| /* | |
| * @brief | |
| * Detect output sink type | |
| */ | |
| static enum signal_type link_detect_sink_signal_type(struct dc_link *link, | |
| enum dc_detect_reason reason) | |
| { | |
| enum signal_type result; | |
| struct audio_support *aud_support; | |
| struct graphics_object_id enc_id; | |
| /* External DP bridges should use DP signal regardless of connector type. */ | |
| if (link->ext_enc_id.id) | |
| return SIGNAL_TYPE_DISPLAY_PORT; | |
| if (link->is_dig_mapping_flexible) | |
| enc_id = (struct graphics_object_id){.id = ENCODER_ID_UNKNOWN}; | |
| else | |
| enc_id = link->link_enc->id; | |
| result = get_basic_signal_type(enc_id, link->link_id); | |
| /* Use basic signal type for link without physical connector. */ | |
| if (link->ep_type != DISPLAY_ENDPOINT_PHY) | |
| return result; | |
| /* | |
| * Internal digital encoder will detect only dongles | |
| * that require digital signal | |
| */ | |
| /* | |
| * Detection mechanism is different | |
| * for different native connectors. | |
| * LVDS connector supports only LVDS signal; | |
| * PCIE is a bus slot, the actual connector needs to be detected first; | |
| * eDP connector supports only eDP signal; | |
| * HDMI should check straps for audio | |
| */ | |
| switch (link->link_id.id) { | |
| case CONNECTOR_ID_HDMI_TYPE_A: | |
| /* | |
| * check audio support: | |
| * if native HDMI is not supported, switch to DVI | |
| */ | |
| aud_support = &link->dc->res_pool->audio_support; | |
| if (!aud_support->hdmi_audio_native) | |
| result = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| break; | |
| case CONNECTOR_ID_DISPLAY_PORT: | |
| case CONNECTOR_ID_USBC: | |
| /* | |
| * DP HPD short pulse. Passive DP dongle will not | |
| * have short pulse | |
| */ | |
| if (reason != DETECT_REASON_HPDRX) { | |
| /* | |
| * Check whether DP signal detected: if not - | |
| * we assume signal is DVI; it could be corrected | |
| * to HDMI after dongle detection | |
| */ | |
| if (!dm_helpers_is_dp_sink_present(link)) | |
| result = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| } | |
| break; | |
| case CONNECTOR_ID_PCIE: | |
| /* ZAZTODO implement PCIE add-on card detection */ | |
| break; | |
| default: | |
| break; | |
| } | |
| return result; | |
| } | |
| static enum signal_type decide_signal_from_strap_and_dongle_type(enum display_dongle_type dongle_type, | |
| struct audio_support *audio_support) | |
| { | |
| enum signal_type signal = SIGNAL_TYPE_NONE; | |
| switch (dongle_type) { | |
| case DISPLAY_DONGLE_DP_HDMI_DONGLE: | |
| if (audio_support->hdmi_audio_on_dongle) | |
| signal = SIGNAL_TYPE_HDMI_TYPE_A; | |
| else | |
| signal = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| break; | |
| case DISPLAY_DONGLE_DP_DVI_DONGLE: | |
| signal = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| break; | |
| case DISPLAY_DONGLE_DP_HDMI_MISMATCHED_DONGLE: | |
| if (audio_support->hdmi_audio_native) | |
| signal = SIGNAL_TYPE_HDMI_TYPE_A; | |
| else | |
| signal = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| break; | |
| default: | |
| signal = SIGNAL_TYPE_NONE; | |
| break; | |
| } | |
| return signal; | |
| } | |
| static void read_scdc_caps(struct ddc_service *ddc_service, | |
| struct dc_sink *sink) | |
| { | |
| uint8_t slave_address = HDMI_SCDC_ADDRESS; | |
| uint8_t offset = HDMI_SCDC_MANUFACTURER_OUI; | |
| if (ddc_service->link->local_sink && | |
| !ddc_service->link->local_sink->edid_caps.scdc_present) | |
| return; | |
| link_query_ddc_data(ddc_service, slave_address, &offset, | |
| sizeof(offset), sink->scdc_caps.manufacturer_OUI.byte, | |
| sizeof(sink->scdc_caps.manufacturer_OUI.byte)); | |
| offset = HDMI_SCDC_DEVICE_ID; | |
| link_query_ddc_data(ddc_service, slave_address, &offset, | |
| sizeof(offset), &(sink->scdc_caps.device_id.byte), | |
| sizeof(sink->scdc_caps.device_id.byte)); | |
| } | |
| static bool i2c_read( | |
| struct ddc_service *ddc, | |
| uint32_t address, | |
| uint8_t *buffer, | |
| uint32_t len) | |
| { | |
| uint8_t offs_data = 0; | |
| struct i2c_payload payloads[2] = { | |
| { | |
| .write = true, | |
| .address = (uint8_t)address, | |
| .length = 1, | |
| .data = &offs_data }, | |
| { | |
| .write = false, | |
| .address = (uint8_t)address, | |
| .length = len, | |
| .data = buffer } }; | |
| struct i2c_command command = { | |
| .payloads = payloads, | |
| .number_of_payloads = 2, | |
| .engine = DDC_I2C_COMMAND_ENGINE, | |
| .speed = ddc->ctx->dc->caps.i2c_speed_in_khz }; | |
| return dm_helpers_submit_i2c( | |
| ddc->ctx, | |
| ddc->link, | |
| &command); | |
| } | |
| enum { | |
| DP_SINK_CAP_SIZE = | |
| DP_EDP_CONFIGURATION_CAP - DP_DPCD_REV + 1 | |
| }; | |
| static void query_dp_dual_mode_adaptor( | |
| struct ddc_service *ddc, | |
| struct display_sink_capability *sink_cap) | |
| { | |
| uint8_t i; | |
| bool is_valid_hdmi_signature; | |
| enum display_dongle_type *dongle = &sink_cap->dongle_type; | |
| uint8_t type2_dongle_buf[DP_ADAPTOR_TYPE2_SIZE]; | |
| bool is_type2_dongle = false; | |
| int retry_count = 2; | |
| struct dp_hdmi_dongle_signature_data *dongle_signature; | |
| struct dc_link *link = ddc->link; | |
| /* Assume we have no valid DP passive dongle connected */ | |
| *dongle = DISPLAY_DONGLE_NONE; | |
| sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_DVI_MAX_TMDS_CLK; | |
| /* Read DP-HDMI dongle I2c (no response interpreted as DP-DVI dongle)*/ | |
| if (link->force_to_use_aux) { | |
| if (!dm_helpers_submit_i2c_over_aux( | |
| ddc, | |
| DP_HDMI_DONGLE_ADDRESS, | |
| 0, | |
| type2_dongle_buf, | |
| sizeof(type2_dongle_buf), | |
| true)) { | |
| /* Use same approach as below with native i2c - HDMI dongles can sometimes fail here without retrying*/ | |
| while (retry_count > 0) { | |
| if (dm_helpers_submit_i2c_over_aux( | |
| ddc, | |
| DP_HDMI_DONGLE_ADDRESS, | |
| 0, | |
| type2_dongle_buf, | |
| sizeof(type2_dongle_buf), | |
| true)) | |
| break; | |
| retry_count--; | |
| } | |
| /* In case I2C over Aux no response, it is interpreted as DISPLAY_DONGLE_NONE */ | |
| if (retry_count == 0) { | |
| return; | |
| } | |
| } | |
| } else { | |
| if (!i2c_read( | |
| ddc, | |
| DP_HDMI_DONGLE_ADDRESS, | |
| type2_dongle_buf, | |
| sizeof(type2_dongle_buf))) { | |
| /* Passive HDMI dongles can sometimes fail here without retrying*/ | |
| while (retry_count > 0) { | |
| if (i2c_read(ddc, | |
| DP_HDMI_DONGLE_ADDRESS, | |
| type2_dongle_buf, | |
| sizeof(type2_dongle_buf))) | |
| break; | |
| retry_count--; | |
| } | |
| if (retry_count == 0) { | |
| *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE; | |
| sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_DVI_MAX_TMDS_CLK; | |
| CONN_DATA_DETECT(link, type2_dongle_buf, sizeof(type2_dongle_buf), | |
| "DP-DVI passive dongle %dMhz: ", | |
| DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000); | |
| return; | |
| } | |
| } | |
| } | |
| /* Check if Type 2 dongle.*/ | |
| if (type2_dongle_buf[DP_ADAPTOR_TYPE2_REG_ID] == DP_ADAPTOR_TYPE2_ID) | |
| is_type2_dongle = true; | |
| dongle_signature = | |
| (struct dp_hdmi_dongle_signature_data *)type2_dongle_buf; | |
| is_valid_hdmi_signature = true; | |
| /* Check EOT */ | |
| if (dongle_signature->eot != DP_HDMI_DONGLE_SIGNATURE_EOT) { | |
| is_valid_hdmi_signature = false; | |
| } | |
| /* Check signature */ | |
| for (i = 0; i < sizeof(dongle_signature->id); ++i) { | |
| /* If its not the right signature, | |
| * skip mismatch in subversion byte.*/ | |
| if (dongle_signature->id[i] != | |
| dp_hdmi_dongle_signature_str[i] && i != 3) { | |
| if (is_type2_dongle) { | |
| is_valid_hdmi_signature = false; | |
| break; | |
| } | |
| } | |
| } | |
| if (is_valid_hdmi_signature) | |
| sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_HDMI_SAFE_MAX_TMDS_CLK; | |
| if (is_type2_dongle) { | |
| uint32_t max_tmds_clk = | |
| type2_dongle_buf[DP_ADAPTOR_TYPE2_REG_MAX_TMDS_CLK]; | |
| max_tmds_clk = max_tmds_clk * 2 + max_tmds_clk / 2; | |
| if (0 == max_tmds_clk || | |
| max_tmds_clk < DP_ADAPTOR_TYPE2_MIN_TMDS_CLK || | |
| max_tmds_clk > DP_ADAPTOR_TYPE2_MAX_TMDS_CLK) { | |
| *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE; | |
| CONN_DATA_DETECT(ddc->link, type2_dongle_buf, | |
| sizeof(type2_dongle_buf), | |
| "DP-DVI passive dongle %dMhz: ", | |
| DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000); | |
| } else { | |
| if (is_valid_hdmi_signature == true) { | |
| *dongle = DISPLAY_DONGLE_DP_HDMI_DONGLE; | |
| CONN_DATA_DETECT(ddc->link, type2_dongle_buf, | |
| sizeof(type2_dongle_buf), | |
| "Type 2 DP-HDMI passive dongle %dMhz: ", | |
| max_tmds_clk); | |
| } else { | |
| *dongle = DISPLAY_DONGLE_DP_HDMI_MISMATCHED_DONGLE; | |
| CONN_DATA_DETECT(ddc->link, type2_dongle_buf, | |
| sizeof(type2_dongle_buf), | |
| "Type 2 DP-HDMI passive dongle (no signature) %dMhz: ", | |
| max_tmds_clk); | |
| } | |
| /* Multiply by 1000 to convert to kHz. */ | |
| sink_cap->max_hdmi_pixel_clock = | |
| max_tmds_clk * 1000; | |
| } | |
| sink_cap->is_dongle_type_one = false; | |
| } else { | |
| if (is_valid_hdmi_signature == true) { | |
| *dongle = DISPLAY_DONGLE_DP_HDMI_DONGLE; | |
| CONN_DATA_DETECT(ddc->link, type2_dongle_buf, | |
| sizeof(type2_dongle_buf), | |
| "Type 1 DP-HDMI passive dongle %dMhz: ", | |
| sink_cap->max_hdmi_pixel_clock / 1000); | |
| } else { | |
| *dongle = DISPLAY_DONGLE_DP_HDMI_MISMATCHED_DONGLE; | |
| CONN_DATA_DETECT(ddc->link, type2_dongle_buf, | |
| sizeof(type2_dongle_buf), | |
| "Type 1 DP-HDMI passive dongle (no signature) %dMhz: ", | |
| sink_cap->max_hdmi_pixel_clock / 1000); | |
| } | |
| sink_cap->is_dongle_type_one = true; | |
| } | |
| return; | |
| } | |
| static enum signal_type dp_passive_dongle_detection(struct ddc_service *ddc, | |
| struct display_sink_capability *sink_cap, | |
| struct audio_support *audio_support) | |
| { | |
| query_dp_dual_mode_adaptor(ddc, sink_cap); | |
| return decide_signal_from_strap_and_dongle_type(sink_cap->dongle_type, | |
| audio_support); | |
| } | |
| static void link_disconnect_sink(struct dc_link *link) | |
| { | |
| if (link->local_sink) { | |
| dc_sink_release(link->local_sink); | |
| link->local_sink = NULL; | |
| } | |
| link->dpcd_sink_count = 0; | |
| //link->dpcd_caps.dpcd_rev.raw = 0; | |
| } | |
| static void link_disconnect_remap(struct dc_sink *prev_sink, struct dc_link *link) | |
| { | |
| dc_sink_release(link->local_sink); | |
| link->local_sink = prev_sink; | |
| } | |
| static void query_hdcp_capability(enum signal_type signal, struct dc_link *link) | |
| { | |
| struct hdcp_protection_message msg22; | |
| struct hdcp_protection_message msg14; | |
| memset(&msg22, 0, sizeof(struct hdcp_protection_message)); | |
| memset(&msg14, 0, sizeof(struct hdcp_protection_message)); | |
| memset(link->hdcp_caps.rx_caps.raw, 0, | |
| sizeof(link->hdcp_caps.rx_caps.raw)); | |
| if ((link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT && | |
| link->ddc->transaction_type == | |
| DDC_TRANSACTION_TYPE_I2C_OVER_AUX) || | |
| link->connector_signal == SIGNAL_TYPE_EDP) { | |
| msg22.data = link->hdcp_caps.rx_caps.raw; | |
| msg22.length = sizeof(link->hdcp_caps.rx_caps.raw); | |
| msg22.msg_id = HDCP_MESSAGE_ID_RX_CAPS; | |
| if (link->force_to_use_aux && (signal == SIGNAL_TYPE_HDMI_TYPE_A)) { | |
| // case with passive dongle with i2c over aux | |
| msg22.data = &link->hdcp_caps.rx_caps.fields.version; | |
| msg22.length = sizeof(link->hdcp_caps.rx_caps.fields.version); | |
| msg22.msg_id = HDCP_MESSAGE_ID_HDCP2VERSION; | |
| } | |
| } else { | |
| msg22.data = &link->hdcp_caps.rx_caps.fields.version; | |
| msg22.length = sizeof(link->hdcp_caps.rx_caps.fields.version); | |
| msg22.msg_id = HDCP_MESSAGE_ID_HDCP2VERSION; | |
| } | |
| msg22.version = HDCP_VERSION_22; | |
| msg22.link = HDCP_LINK_PRIMARY; | |
| msg22.max_retries = 5; | |
| dc_process_hdcp_msg(signal, link, &msg22); | |
| if (signal == SIGNAL_TYPE_DISPLAY_PORT || signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { | |
| msg14.data = &link->hdcp_caps.bcaps.raw; | |
| msg14.length = sizeof(link->hdcp_caps.bcaps.raw); | |
| msg14.msg_id = HDCP_MESSAGE_ID_READ_BCAPS; | |
| msg14.version = HDCP_VERSION_14; | |
| msg14.link = HDCP_LINK_PRIMARY; | |
| msg14.max_retries = 5; | |
| dc_process_hdcp_msg(signal, link, &msg14); | |
| } | |
| } | |
| static void read_current_link_settings_on_detect(struct dc_link *link) | |
| { | |
| union lane_count_set lane_count_set = {0}; | |
| uint8_t link_bw_set = 0; | |
| uint8_t link_rate_set = 0; | |
| uint32_t read_dpcd_retry_cnt = 10; | |
| enum dc_status status = DC_ERROR_UNEXPECTED; | |
| unsigned int i; | |
| union max_down_spread max_down_spread = {0}; | |
| // Read DPCD 00101h to find out the number of lanes currently set | |
| for (i = 0; i < read_dpcd_retry_cnt; i++) { | |
| status = core_link_read_dpcd(link, | |
| DP_LANE_COUNT_SET, | |
| &lane_count_set.raw, | |
| sizeof(lane_count_set)); | |
| /* First DPCD read after VDD ON can fail if the particular board | |
| * does not have HPD pin wired correctly. So if DPCD read fails, | |
| * which it should never happen, retry a few times. Target worst | |
| * case scenario of 80 ms. | |
| */ | |
| if (status == DC_OK) { | |
| link->cur_link_settings.lane_count = | |
| lane_count_set.bits.LANE_COUNT_SET; | |
| break; | |
| } | |
| msleep(8); | |
| } | |
| // Read DPCD 00100h to find if standard link rates are set | |
| core_link_read_dpcd(link, DP_LINK_BW_SET, | |
| &link_bw_set, sizeof(link_bw_set)); | |
| if (link_bw_set == 0) { | |
| if (link->connector_signal == SIGNAL_TYPE_EDP) { | |
| /* If standard link rates are not being used, | |
| * Read DPCD 00115h to find the edp link rate set used | |
| */ | |
| core_link_read_dpcd(link, DP_LINK_RATE_SET, | |
| &link_rate_set, sizeof(link_rate_set)); | |
| // edp_supported_link_rates_count = 0 for DP | |
| if (link_rate_set < link->dpcd_caps.edp_supported_link_rates_count) { | |
| link->cur_link_settings.link_rate = | |
| link->dpcd_caps.edp_supported_link_rates[link_rate_set]; | |
| link->cur_link_settings.link_rate_set = link_rate_set; | |
| link->cur_link_settings.use_link_rate_set = true; | |
| } | |
| } else { | |
| // Link Rate not found. Seamless boot may not work. | |
| ASSERT(false); | |
| } | |
| } else { | |
| link->cur_link_settings.link_rate = link_bw_set; | |
| link->cur_link_settings.use_link_rate_set = false; | |
| } | |
| // Read DPCD 00003h to find the max down spread. | |
| core_link_read_dpcd(link, DP_MAX_DOWNSPREAD, | |
| &max_down_spread.raw, sizeof(max_down_spread)); | |
| link->cur_link_settings.link_spread = | |
| max_down_spread.bits.MAX_DOWN_SPREAD ? | |
| LINK_SPREAD_05_DOWNSPREAD_30KHZ : LINK_SPREAD_DISABLED; | |
| } | |
| static bool detect_dp(struct dc_link *link, | |
| struct display_sink_capability *sink_caps, | |
| enum dc_detect_reason reason) | |
| { | |
| struct audio_support *audio_support = &link->dc->res_pool->audio_support; | |
| sink_caps->signal = link_detect_sink_signal_type(link, reason); | |
| sink_caps->transaction_type = | |
| get_ddc_transaction_type(sink_caps->signal); | |
| if (sink_caps->transaction_type == DDC_TRANSACTION_TYPE_I2C_OVER_AUX) { | |
| sink_caps->signal = SIGNAL_TYPE_DISPLAY_PORT; | |
| if (!detect_dp_sink_caps(link)) { | |
| if (link->force_to_use_aux) { | |
| sink_caps->signal = dp_passive_dongle_detection(link->ddc, sink_caps, audio_support); | |
| link->dpcd_caps.dongle_type = sink_caps->dongle_type; | |
| link->dpcd_caps.is_dongle_type_one = sink_caps->is_dongle_type_one; | |
| link->dpcd_caps.dpcd_rev.raw = 0; | |
| /* Type 1 dongles do not work with I2C over Aux and also some of | |
| * Type 2 dongles do not support I2C over Aux well, so for these | |
| * cases when native Aux transactons fails and I2C over Aux fails | |
| * report that nothing is connected, as we can't tell is it bad | |
| * DP sink or bad passive dongle. | |
| */ | |
| if (sink_caps->dongle_type == DISPLAY_DONGLE_NONE) | |
| return false; | |
| else | |
| return true; | |
| } else { | |
| return false; | |
| } | |
| } | |
| if (is_dp_branch_device(link)) | |
| /* DP SST branch */ | |
| link->type = dc_connection_sst_branch; | |
| } else { | |
| if (link->dc->debug.disable_dp_plus_plus_wa && | |
| link->link_enc->features.flags.bits.IS_UHBR20_CAPABLE) | |
| return false; | |
| /* DP passive dongles */ | |
| sink_caps->signal = dp_passive_dongle_detection(link->ddc, | |
| sink_caps, | |
| audio_support); | |
| link->dpcd_caps.dongle_type = sink_caps->dongle_type; | |
| link->dpcd_caps.is_dongle_type_one = sink_caps->is_dongle_type_one; | |
| link->dpcd_caps.dpcd_rev.raw = 0; | |
| link->dpcd_caps.usb4_dp_tun_info.dp_tun_cap.raw = 0; | |
| } | |
| if (link->ext_enc_id.id) { | |
| /* Fix number of connected sinks reported by external DP bridge */ | |
| link->dpcd_caps.sink_count.bits.SINK_COUNT = 1; | |
| /* NUTMEG requires that we use HBR, doesn't work with RBR. */ | |
| if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_00001A) | |
| link->wa_flags.dp_skip_rbr = true; | |
| } | |
| return true; | |
| } | |
| static bool is_same_edid(struct dc_edid *old_edid, struct dc_edid *new_edid) | |
| { | |
| if (old_edid == NULL || new_edid == NULL) | |
| return false; | |
| if (old_edid->length != new_edid->length) | |
| return false; | |
| if (new_edid->length == 0) | |
| return false; | |
| return (memcmp(old_edid->raw_edid, | |
| new_edid->raw_edid, new_edid->length) == 0); | |
| } | |
| static bool wait_for_entering_dp_alt_mode(struct dc_link *link) | |
| { | |
| /** | |
| * something is terribly wrong if time out is > 200ms. (5Hz) | |
| * 500 microseconds * 400 tries us 200 ms | |
| **/ | |
| unsigned int sleep_time_in_microseconds = 500; | |
| unsigned int tries_allowed = 400; | |
| bool is_in_alt_mode; | |
| unsigned long long enter_timestamp; | |
| unsigned long long finish_timestamp; | |
| unsigned long long time_taken_in_ns; | |
| unsigned int tries_taken; | |
| /** | |
| * this function will only exist if we are on dcn21 (is_in_alt_mode is a | |
| * function pointer, so checking to see if it is equal to 0 is the same | |
| * as checking to see if it is null | |
| **/ | |
| if (!link->link_enc->funcs->is_in_alt_mode) | |
| return true; | |
| is_in_alt_mode = link->link_enc->funcs->is_in_alt_mode(link->link_enc); | |
| DC_LOG_DC("DP Alt mode state on HPD: %d Link=%d\n", is_in_alt_mode, link->link_index); | |
| if (is_in_alt_mode) | |
| return true; | |
| enter_timestamp = dm_get_timestamp(link->ctx); | |
| for (tries_taken = 0; tries_taken < tries_allowed; tries_taken++) { | |
| udelay(sleep_time_in_microseconds); | |
| /* ask the link if alt mode is enabled, if so return ok */ | |
| if (link->link_enc->funcs->is_in_alt_mode(link->link_enc)) { | |
| finish_timestamp = dm_get_timestamp(link->ctx); | |
| time_taken_in_ns = | |
| dm_get_elapse_time_in_ns(link->ctx, | |
| finish_timestamp, | |
| enter_timestamp); | |
| DC_LOG_WARNING("Alt mode entered finished after %llu ms\n", | |
| div_u64(time_taken_in_ns, 1000000)); | |
| return true; | |
| } | |
| } | |
| finish_timestamp = dm_get_timestamp(link->ctx); | |
| time_taken_in_ns = dm_get_elapse_time_in_ns(link->ctx, finish_timestamp, | |
| enter_timestamp); | |
| DC_LOG_WARNING("Alt mode has timed out after %llu ms\n", | |
| div_u64(time_taken_in_ns, 1000000)); | |
| return false; | |
| } | |
| static void apply_dpia_mst_dsc_always_on_wa(struct dc_link *link) | |
| { | |
| /* Apply work around for tunneled MST on certain USB4 docks. Always use DSC if dock | |
| * reports DSC support. | |
| */ | |
| if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && | |
| link->type == dc_connection_mst_branch && | |
| link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 && | |
| link->dpcd_caps.branch_hw_revision == DP_BRANCH_HW_REV_20 && | |
| link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT && | |
| !link->dc->debug.dpia_debug.bits.disable_mst_dsc_work_around) | |
| link->wa_flags.dpia_mst_dsc_always_on = true; | |
| if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && | |
| link->type == dc_connection_mst_branch && | |
| link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 && | |
| link->dpcd_caps.branch_vendor_specific_data[2] == MST_HUB_ID_0x5A && | |
| link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT && | |
| !link->dc->debug.dpia_debug.bits.disable_mst_dsc_work_around) { | |
| link->wa_flags.dpia_mst_dsc_always_on = true; | |
| } | |
| } | |
| static void revert_dpia_mst_dsc_always_on_wa(struct dc_link *link) | |
| { | |
| /* Disable work around which keeps DSC on for tunneled MST on certain USB4 docks. */ | |
| if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) | |
| link->wa_flags.dpia_mst_dsc_always_on = false; | |
| } | |
| static bool discover_dp_mst_topology(struct dc_link *link, enum dc_detect_reason reason) | |
| { | |
| LINK_INFO("link=%d, mst branch is now Connected\n", | |
| link->link_index); | |
| link->type = dc_connection_mst_branch; | |
| apply_dpia_mst_dsc_always_on_wa(link); | |
| dm_helpers_dp_update_branch_info(link->ctx, link); | |
| if (dm_helpers_dp_mst_start_top_mgr(link->ctx, | |
| link, (reason == DETECT_REASON_BOOT || reason == DETECT_REASON_RESUMEFROMS3S4))) { | |
| link_disconnect_sink(link); | |
| } else { | |
| link->type = dc_connection_sst_branch; | |
| } | |
| return link->type == dc_connection_mst_branch; | |
| } | |
| bool link_reset_cur_dp_mst_topology(struct dc_link *link) | |
| { | |
| LINK_INFO("link=%d, mst branch is now Disconnected\n", | |
| link->link_index); | |
| revert_dpia_mst_dsc_always_on_wa(link); | |
| return dm_helpers_dp_mst_stop_top_mgr(link->ctx, link); | |
| } | |
| static bool should_prepare_phy_clocks_for_link_verification(const struct dc *dc, | |
| enum dc_detect_reason reason) | |
| { | |
| int i; | |
| bool can_apply_seamless_boot = false; | |
| for (i = 0; i < dc->current_state->stream_count; i++) { | |
| if (dc->current_state->streams[i]->apply_seamless_boot_optimization) { | |
| can_apply_seamless_boot = true; | |
| break; | |
| } | |
| } | |
| return !can_apply_seamless_boot && reason != DETECT_REASON_BOOT; | |
| } | |
| static bool is_hdmi_frl_in_use(struct dc_link *link) | |
| { | |
| int i; | |
| unsigned int hdmi_conn_count = 0; | |
| unsigned int hdmi_stream_count = 0; | |
| bool hdmi_frl_in_use = false; | |
| bool incoming_link_identical = false; | |
| /*Enumerate HDMI connector from all present links */ | |
| for (i = 0; i < link->dc->link_count; i++) { | |
| if (link->dc->links[i] != NULL && | |
| dc_is_hdmi_signal(link->dc->links[i]->connector_signal)) | |
| hdmi_conn_count++; | |
| } | |
| /* If less than 2 HDMI Connector, assume HPO is always available*/ | |
| if (hdmi_conn_count < 2) | |
| return false; | |
| /*Enumerate existing HDMI stream count*/ | |
| for (i = 0; i < link->dc->current_state->stream_count; i++) { | |
| if (dc_is_hdmi_signal(link->dc->current_state->streams[i]->signal)) | |
| hdmi_stream_count++; | |
| if (link == link->dc->current_state->streams[i]->link && | |
| (dc_is_hdmi_frl_signal(link->dc->current_state->streams[i]->signal))) | |
| incoming_link_identical = true; | |
| } | |
| if (hdmi_stream_count > 1 || (hdmi_stream_count == 1 && !incoming_link_identical)) { | |
| for (i = 0; i < link->dc->current_state->stream_count; i++) { | |
| if (dc_is_hdmi_frl_signal( | |
| link->dc->current_state->streams[i]->signal)) { | |
| hdmi_frl_in_use = true; | |
| break; | |
| } | |
| } | |
| } | |
| /* Check if previous link already has been assigned with FRL*/ | |
| if (!hdmi_frl_in_use && !incoming_link_identical) { | |
| for (i = 0; i < link->dc->link_count; i++) { | |
| if (link->dc->links[i] != NULL && | |
| link->dc->links[i]->local_sink != NULL && | |
| link != link->dc->links[i] && | |
| dc_is_hdmi_frl_signal( | |
| link->dc->links[i]->local_sink->sink_signal)) { | |
| hdmi_frl_in_use = true; | |
| break; | |
| } | |
| } | |
| } | |
| return hdmi_frl_in_use; | |
| } | |
| static void prepare_phy_clocks_for_destructive_link_verification(const struct dc *dc) | |
| { | |
| dc_z10_restore(dc); | |
| clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); | |
| } | |
| static void restore_phy_clocks_for_destructive_link_verification(const struct dc *dc) | |
| { | |
| clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); | |
| } | |
| static void verify_link_capability_destructive(struct dc_link *link, | |
| enum dc_detect_reason reason) | |
| { | |
| bool should_prepare_phy_clocks = | |
| should_prepare_phy_clocks_for_link_verification(link->dc, reason); | |
| if (should_prepare_phy_clocks) | |
| prepare_phy_clocks_for_destructive_link_verification(link->dc); | |
| if (dc_is_dp_signal(link->local_sink->sink_signal)) { | |
| struct dc_link_settings known_limit_link_setting = | |
| dp_get_max_link_cap(link); | |
| link_set_all_streams_dpms_off_for_link(link); | |
| dp_verify_link_cap_with_retries( | |
| link, &known_limit_link_setting, | |
| LINK_TRAINING_MAX_VERIFY_RETRY); | |
| } else if (dc_is_hdmi_signal(link->local_sink->sink_signal)) { | |
| if (!is_hdmi_frl_in_use(link)) { | |
| link_set_all_streams_dpms_off_for_link(link); | |
| hdmi_frl_verify_link_cap(link, &link->frl_reported_link_cap); | |
| link->local_sink->sink_signal = (link->frl_verified_link_cap.frl_link_rate != HDMI_FRL_LINK_RATE_DISABLE) | |
| ? SIGNAL_TYPE_HDMI_FRL : SIGNAL_TYPE_HDMI_TYPE_A; | |
| } else { | |
| link->local_sink->sink_signal = SIGNAL_TYPE_HDMI_TYPE_A; | |
| link->frl_verified_link_cap.frl_link_rate = HDMI_FRL_LINK_RATE_DISABLE; | |
| } | |
| } else { | |
| ASSERT(0); | |
| } | |
| if (should_prepare_phy_clocks) | |
| restore_phy_clocks_for_destructive_link_verification(link->dc); | |
| } | |
| static void verify_link_capability_non_destructive(struct dc_link *link) | |
| { | |
| if (dc_is_dp_signal(link->local_sink->sink_signal)) { | |
| if (dc_is_embedded_signal(link->local_sink->sink_signal) || | |
| link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) | |
| /* TODO - should we check link encoder's max link caps here? | |
| * How do we know which link encoder to check from? | |
| */ | |
| link->verified_link_cap = link->reported_link_cap; | |
| else | |
| link->verified_link_cap = dp_get_max_link_cap(link); | |
| } else if (dc_is_hdmi_signal(link->local_sink->sink_signal)) { | |
| link->frl_verified_link_cap = link->frl_reported_link_cap; | |
| if (is_hdmi_frl_in_use(link)) { | |
| link->local_sink->sink_signal = SIGNAL_TYPE_HDMI_TYPE_A; | |
| link->frl_verified_link_cap.frl_link_rate = HDMI_FRL_LINK_RATE_DISABLE; | |
| } | |
| } | |
| } | |
| static bool should_verify_link_capability_destructively(struct dc_link *link, | |
| enum dc_detect_reason reason) | |
| { | |
| (void)reason; | |
| bool destrictive = false; | |
| struct dc_link_settings max_link_cap; | |
| bool is_link_enc_unavailable = false; | |
| if (!link->dc->config.unify_link_enc_assignment) | |
| is_link_enc_unavailable = link->link_enc && | |
| link->dc->res_pool->funcs->link_encs_assign && | |
| !link_enc_cfg_is_link_enc_avail( | |
| link->ctx->dc, | |
| link->link_enc->preferred_engine, | |
| link); | |
| if (dc_is_dp_signal(link->local_sink->sink_signal)) { | |
| max_link_cap = dp_get_max_link_cap(link); | |
| destrictive = true; | |
| if (link->dc->debug.skip_detection_link_training || | |
| dc_is_embedded_signal(link->local_sink->sink_signal) || | |
| (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && | |
| !link->dc->config.enable_dpia_pre_training)) { | |
| destrictive = false; | |
| } else if (link_dp_get_encoding_format(&max_link_cap) == | |
| DP_8b_10b_ENCODING) { | |
| if (link->dpcd_caps.is_mst_capable || | |
| is_link_enc_unavailable) { | |
| destrictive = false; | |
| } | |
| } | |
| } else if (dc_is_hdmi_signal(link->local_sink->sink_signal) && link->link_enc && | |
| link->link_enc->features.flags.bits.IS_HDMI_FRL_CAPABLE && | |
| link->local_sink->edid_caps.max_frl_rate != 0) { | |
| int i = 0; | |
| struct pipe_ctx *pipes = | |
| link->dc->current_state->res_ctx.pipe_ctx; | |
| destrictive = true; | |
| if (is_hdmi_frl_in_use(link)) { | |
| destrictive = false; | |
| } else if (link->local_sink->edid_caps.panel_patch.skip_frl_pre_training) { | |
| for (i = 0; i < MAX_PIPES; i++) { | |
| if (pipes[i].stream != NULL && | |
| pipes[i].stream->link == link) { | |
| /*If link is already active, skip PHY programming*/ | |
| if (link->link_status.link_active) { | |
| destrictive = false; | |
| } | |
| } | |
| } | |
| } else if (link->dc->debug.skip_detection_link_training) { | |
| destrictive = false; | |
| } | |
| } | |
| return destrictive; | |
| } | |
| static void verify_link_capability(struct dc_link *link, | |
| enum dc_detect_reason reason) | |
| { | |
| if (should_verify_link_capability_destructively(link, reason)) | |
| verify_link_capability_destructive(link, reason); | |
| else | |
| verify_link_capability_non_destructive(link); | |
| } | |
| /** | |
| * link_detect_evaluate_edid_header() - Evaluate if an EDID header is acceptable. | |
| * | |
| * Evaluates an 8-byte EDID header to check if it's good enough | |
| * for the purpose of determining whether a display is connected | |
| * without reading the full EDID. | |
| * | |
| * @edid_header: The first 8 bytes of the EDID read from DDC. | |
| * | |
| * Return: true if the header looks valid (>= 6 of 8 bytes match the | |
| * expected 00/FF pattern), false otherwise. | |
| */ | |
| static bool link_detect_evaluate_edid_header(uint8_t edid_header[8]) | |
| { | |
| int edid_header_score = 0; | |
| int i; | |
| for (i = 0; i < 8; ++i) | |
| edid_header_score += edid_header[i] == ((i == 0 || i == 7) ? 0x00 : 0xff); | |
| return edid_header_score >= 6; | |
| } | |
| /** | |
| * link_detect_ddc_probe() - Probe the DDC to see if a display is connected. | |
| * | |
| * Detect whether a display is connected to DDC without reading full EDID. | |
| * Reads only the EDID header (the first 8 bytes of EDID) from DDC and | |
| * evaluates whether that matches. | |
| * | |
| * @link: DC link whose DDC/I2C is probed for the EDID header. | |
| * | |
| * Return: true if the EDID header was read and passes validation, | |
| * false otherwise. | |
| */ | |
| static bool link_detect_ddc_probe(struct dc_link *link) | |
| { | |
| enum signal_type signal = link_detect_sink_signal_type(link, DETECT_REASON_HPD); | |
| enum ddc_transaction_type transaction_type = get_ddc_transaction_type(signal); | |
| uint8_t edid_header[8] = {0}; | |
| uint8_t zero = 0; | |
| bool ddc_probed; | |
| if (!link->ddc) | |
| return false; | |
| if (link->dc->hwss.prepare_ddc) | |
| link->dc->hwss.prepare_ddc(link); | |
| set_ddc_transaction_type(link->ddc, transaction_type); | |
| ddc_probed = link_query_ddc_data(link->ddc, 0x50, &zero, 1, edid_header, sizeof(edid_header)); | |
| if (!ddc_probed) | |
| return false; | |
| if (!link_detect_evaluate_edid_header(edid_header)) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * link_detect_dac_load_detect() - Performs DAC load detection. | |
| * | |
| * Load detection can be used to detect the presence of an | |
| * analog display when we can't read DDC. This causes a visible | |
| * visual glitch so it should be used sparingly. | |
| * | |
| * @link: DC link to test using the DAC load-detect path. | |
| * | |
| * Return: true if the VBIOS load-detect call reports OK, false | |
| * otherwise. | |
| */ | |
| static bool link_detect_dac_load_detect(struct dc_link *link) | |
| { | |
| if (!link->dc->hwss.dac_load_detect) | |
| return false; | |
| return link->dc->hwss.dac_load_detect(link); | |
| } | |
| /* | |
| * detect_link_and_local_sink() - Detect if a sink is attached to a given link | |
| * | |
| * link->local_sink is created or destroyed as needed. | |
| * | |
| * This does not create remote sinks. | |
| */ | |
| static bool detect_link_and_local_sink(struct dc_link *link, | |
| enum dc_detect_reason reason) | |
| { | |
| struct dc_sink_init_data sink_init_data = { 0 }; | |
| struct display_sink_capability sink_caps = { 0 }; | |
| uint32_t i; | |
| bool converter_disable_audio = false; | |
| struct audio_support *aud_support = &link->dc->res_pool->audio_support; | |
| bool same_edid = false; | |
| enum dc_edid_status edid_status; | |
| struct dc_context *dc_ctx = link->ctx; | |
| struct dc *dc = dc_ctx->dc; | |
| struct dc_sink *sink = NULL; | |
| struct dc_sink *prev_sink = NULL; | |
| struct dpcd_caps prev_dpcd_caps; | |
| enum dc_connection_type new_connection_type = dc_connection_none; | |
| const uint32_t post_oui_delay = 30; // 30ms | |
| if (dc_is_virtual_signal(link->connector_signal)) | |
| return false; | |
| if (((link->connector_signal == SIGNAL_TYPE_LVDS || | |
| link->connector_signal == SIGNAL_TYPE_EDP) && | |
| (!link->dc->config.allow_edp_hotplug_detection)) && | |
| link->local_sink) { | |
| // need to re-write OUI and brightness in resume case | |
| if (link->connector_signal == SIGNAL_TYPE_EDP && | |
| (link->dpcd_sink_ext_caps.bits.oled == 1)) { | |
| dpcd_set_source_specific_data(link); | |
| msleep(post_oui_delay); | |
| set_default_brightness_aux(link); | |
| } | |
| return true; | |
| } | |
| if (!link_detect_connection_type(link, &new_connection_type)) { | |
| BREAK_TO_DEBUGGER(); | |
| return false; | |
| } | |
| prev_sink = link->local_sink; | |
| if (prev_sink) { | |
| dc_sink_retain(prev_sink); | |
| memcpy(&prev_dpcd_caps, &link->dpcd_caps, sizeof(struct dpcd_caps)); | |
| } | |
| link_disconnect_sink(link); | |
| if (new_connection_type != dc_connection_none) { | |
| link->type = new_connection_type; | |
| link->link_state_valid = false; | |
| /* From Disconnected-to-Connected. */ | |
| switch (link->connector_signal) { | |
| case SIGNAL_TYPE_HDMI_FRL: | |
| case SIGNAL_TYPE_HDMI_TYPE_A: { | |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; | |
| if (aud_support->hdmi_audio_native) | |
| sink_caps.signal = SIGNAL_TYPE_HDMI_TYPE_A; | |
| else | |
| sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| break; | |
| } | |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: { | |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; | |
| sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| break; | |
| } | |
| case SIGNAL_TYPE_DVI_DUAL_LINK: { | |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; | |
| sink_caps.signal = SIGNAL_TYPE_DVI_DUAL_LINK; | |
| break; | |
| } | |
| case SIGNAL_TYPE_RGB: { | |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; | |
| sink_caps.signal = SIGNAL_TYPE_RGB; | |
| break; | |
| } | |
| case SIGNAL_TYPE_LVDS: { | |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; | |
| sink_caps.signal = SIGNAL_TYPE_LVDS; | |
| break; | |
| } | |
| case SIGNAL_TYPE_EDP: { | |
| detect_edp_sink_caps(link); | |
| read_current_link_settings_on_detect(link); | |
| /* Disable power sequence on MIPI panel + converter | |
| */ | |
| if (dc->config.enable_mipi_converter_optimization && | |
| dc_ctx->dce_version == DCN_VERSION_3_01 && | |
| link->dpcd_caps.sink_dev_id == DP_BRANCH_DEVICE_ID_0022B9 && | |
| memcmp(&link->dpcd_caps.branch_dev_name, DP_SINK_BRANCH_DEV_NAME_7580, | |
| sizeof(link->dpcd_caps.branch_dev_name)) == 0) { | |
| dc->config.edp_no_power_sequencing = true; | |
| if (!link->dpcd_caps.set_power_state_capable_edp) | |
| link->wa_flags.dp_keep_receiver_powered = true; | |
| } | |
| sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C_OVER_AUX; | |
| sink_caps.signal = SIGNAL_TYPE_EDP; | |
| break; | |
| } | |
| case SIGNAL_TYPE_DISPLAY_PORT: { | |
| /* wa HPD high coming too early*/ | |
| if (link->ep_type == DISPLAY_ENDPOINT_PHY && | |
| link->link_enc->features.flags.bits.DP_IS_USB_C == 1) { | |
| /* if alt mode times out, return false */ | |
| if (!wait_for_entering_dp_alt_mode(link)) { | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| return false; | |
| } | |
| } | |
| if (!detect_dp(link, &sink_caps, reason)) { | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| return false; | |
| } | |
| /* Active SST downstream branch device unplug*/ | |
| if (link->type == dc_connection_sst_branch && | |
| link->dpcd_caps.sink_count.bits.SINK_COUNT == 0) { | |
| if (prev_sink) | |
| /* Downstream unplug */ | |
| dc_sink_release(prev_sink); | |
| return true; | |
| } | |
| /* disable audio for non DP to HDMI active sst converter */ | |
| if (link->type == dc_connection_sst_branch && | |
| is_dp_active_dongle(link) && | |
| (link->dpcd_caps.dongle_type != | |
| DISPLAY_DONGLE_DP_HDMI_CONVERTER)) | |
| converter_disable_audio = true; | |
| /* limited link rate to HBR3 for DPIA until we implement USB4 V2 */ | |
| if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && | |
| link->reported_link_cap.link_rate > LINK_RATE_HIGH3) | |
| link->reported_link_cap.link_rate = LINK_RATE_HIGH3; | |
| if (link->dpcd_caps.usb4_dp_tun_info.dp_tun_cap.bits.dp_tunneling | |
| && link->dpcd_caps.usb4_dp_tun_info.dp_tun_cap.bits.dpia_bw_alloc | |
| && link->dpcd_caps.usb4_dp_tun_info.driver_bw_cap.bits.driver_bw_alloc_support) { | |
| if (link_dpia_enable_usb4_dp_bw_alloc_mode(link) == false) | |
| link->dpcd_caps.usb4_dp_tun_info.dp_tun_cap.bits.dpia_bw_alloc = false; | |
| } | |
| break; | |
| } | |
| default: | |
| DC_ERROR("Invalid connector type! signal:%d\n", | |
| link->connector_signal); | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| return false; | |
| } /* switch() */ | |
| if (link->dpcd_caps.sink_count.bits.SINK_COUNT) | |
| link->dpcd_sink_count = | |
| link->dpcd_caps.sink_count.bits.SINK_COUNT; | |
| else | |
| link->dpcd_sink_count = 1; | |
| set_ddc_transaction_type(link->ddc, | |
| sink_caps.transaction_type); | |
| link->aux_mode = | |
| link_is_in_aux_transaction_mode(link->ddc); | |
| sink_init_data.link = link; | |
| sink_init_data.sink_signal = sink_caps.signal; | |
| sink = dc_sink_create(&sink_init_data); | |
| if (!sink) { | |
| DC_ERROR("Failed to create sink!\n"); | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| return false; | |
| } | |
| sink->link->dongle_max_pix_clk = sink_caps.max_hdmi_pixel_clock; | |
| sink->converter_disable_audio = converter_disable_audio; | |
| /* dc_sink_create returns a new reference */ | |
| link->local_sink = sink; | |
| edid_status = dm_helpers_read_local_edid(link->ctx, | |
| link, sink); | |
| switch (edid_status) { | |
| case EDID_BAD_CHECKSUM: | |
| DC_LOG_ERROR("EDID checksum invalid.\n"); | |
| break; | |
| case EDID_PARTIAL_VALID: | |
| DC_LOG_ERROR("Partial EDID valid, abandon invalid blocks.\n"); | |
| break; | |
| case EDID_NO_RESPONSE: | |
| /* Analog connectors without EDID: | |
| * - old monitor that actually doesn't have EDID | |
| * - cheap DVI-A cable or adapter that doesn't connect DDC | |
| */ | |
| if (dc_connector_supports_analog(link->link_id.id)) { | |
| /* If we didn't already detect a display using | |
| * DAC load detection, we know it isn't connected. | |
| */ | |
| if (link->type != dc_connection_analog_load) { | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| link_disconnect_sink(link); | |
| return false; | |
| } | |
| LINK_INFO("link=%d, analog display detected without EDID\n", | |
| link->link_index); | |
| link->type = dc_connection_analog_load; | |
| sink->edid_caps.analog = true; | |
| break; | |
| } | |
| DC_LOG_ERROR("No EDID read.\n"); | |
| /* | |
| * Abort detection for non-DP connectors if we have | |
| * no EDID | |
| * | |
| * DP needs to report as connected if HDP is high | |
| * even if we have no EDID in order to go to | |
| * fail-safe mode | |
| */ | |
| if (dc_is_hdmi_signal(link->connector_signal) || | |
| dc_is_dvi_signal(link->connector_signal)) { | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| return false; | |
| } | |
| if (link->type == dc_connection_sst_branch && | |
| link->dpcd_caps.dongle_type == | |
| DISPLAY_DONGLE_DP_VGA_CONVERTER && | |
| reason == DETECT_REASON_HPDRX) { | |
| /* Abort detection for DP-VGA adapters when EDID | |
| * can't be read and detection reason is VGA-side | |
| * hotplug | |
| */ | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| link_disconnect_sink(link); | |
| return true; | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| // Check if edid is the same | |
| if ((prev_sink) && | |
| (edid_status == EDID_THE_SAME || edid_status == EDID_OK)) | |
| same_edid = is_same_edid(&prev_sink->dc_edid, | |
| &sink->dc_edid); | |
| if (sink->edid_caps.panel_patch.skip_scdc_overwrite) | |
| link->ctx->dc->debug.hdmi20_disable = true; | |
| if (sink->edid_caps.panel_patch.remove_sink_ext_caps) | |
| link->dpcd_sink_ext_caps.raw = 0; | |
| if (dc_is_hdmi_signal(link->connector_signal)) | |
| read_scdc_caps(link->ddc, link->local_sink); | |
| if (dc_is_hdmi_signal(link->connector_signal) && dc->debug.enable_hdmi_idcc) { | |
| memset(&link->hdmi_cable_id, 0, sizeof(union hdmi_idcc_cable_id)); | |
| read_idcc_data(link->ddc, HDMI_IDCC_SCOPE_RW_CA, | |
| link->hdmi_cable_id.raw, 0, 4); | |
| } | |
| if (sink->edid_caps.rr_capable && !dc->debug.skip_hdmi_rr_enable) | |
| hdmi_frl_write_read_request_enable(link->ddc); | |
| /* When FreeSync is toggled through OSD, | |
| * we see same EDID no matter what. Check MCCS caps | |
| * to see if we should update FreeSync caps now. | |
| */ | |
| dm_helpers_read_mccs_caps( | |
| link->ctx, | |
| link, | |
| sink); | |
| if (prev_sink != NULL) { | |
| if (memcmp(&sink->mccs_caps, &prev_sink->mccs_caps, sizeof(struct mccs_caps))) | |
| same_edid = false; | |
| } | |
| if (reason != DETECT_REASON_FALLBACK && dc_is_hdmi_signal(link->connector_signal) && | |
| link->link_enc->features.flags.bits.IS_HDMI_FRL_CAPABLE && sink->edid_caps.max_frl_rate != 0) { | |
| hdmi_frl_retrieve_link_cap(link, link->local_sink); | |
| } | |
| if (reason == DETECT_REASON_FALLBACK && sink->sink_signal == SIGNAL_TYPE_HDMI_FRL) | |
| same_edid = false; | |
| if (link->connector_signal == SIGNAL_TYPE_DISPLAY_PORT && | |
| sink_caps.transaction_type == | |
| DDC_TRANSACTION_TYPE_I2C_OVER_AUX) { | |
| /* | |
| * TODO debug why certain monitors don't like | |
| * two link trainings | |
| */ | |
| query_hdcp_capability(sink->sink_signal, link); | |
| } else { | |
| // If edid is the same, then discard new sink and revert back to original sink | |
| if (same_edid) { | |
| link_disconnect_remap(prev_sink, link); | |
| sink = prev_sink; | |
| prev_sink = NULL; | |
| if (reason == DETECT_REASON_FALLBACK && sink->sink_signal == SIGNAL_TYPE_HDMI_FRL) | |
| sink->sink_signal = SIGNAL_TYPE_HDMI_TYPE_A; | |
| } | |
| if (!sink->edid_caps.analog) | |
| query_hdcp_capability(sink->sink_signal, link); | |
| } | |
| /* DVI-I connector connected to analog display. */ | |
| if ((link->link_id.id == CONNECTOR_ID_DUAL_LINK_DVII || | |
| link->link_id.id == CONNECTOR_ID_SINGLE_LINK_DVII) && | |
| sink->edid_caps.analog) | |
| sink->sink_signal = SIGNAL_TYPE_RGB; | |
| /* HDMI-DVI Dongle */ | |
| if (sink->sink_signal == SIGNAL_TYPE_HDMI_TYPE_A && | |
| !sink->edid_caps.edid_hdmi) | |
| sink->sink_signal = SIGNAL_TYPE_DVI_SINGLE_LINK; | |
| else if (dc_is_dvi_signal(sink->sink_signal) && | |
| dc_is_dvi_signal(link->connector_signal) && | |
| aud_support->hdmi_audio_native && | |
| sink->edid_caps.edid_hdmi) | |
| sink->sink_signal = SIGNAL_TYPE_HDMI_TYPE_A; | |
| if (link->local_sink && dc_is_dp_signal(sink_caps.signal)) | |
| dp_trace_init(link); | |
| /* Connectivity log: detection */ | |
| for (i = 0; i < sink->dc_edid.length / DC_EDID_BLOCK_SIZE; i++) { | |
| CONN_DATA_DETECT(link, | |
| &sink->dc_edid.raw_edid[i * DC_EDID_BLOCK_SIZE], | |
| DC_EDID_BLOCK_SIZE, | |
| "%s: [Block %d] ", sink->edid_caps.display_name, i); | |
| } | |
| DC_LOG_DETECTION_EDID_PARSER("%s: " | |
| "manufacturer_id = %X, " | |
| "product_id = %X, " | |
| "serial_number = %X, " | |
| "manufacture_week = %d, " | |
| "manufacture_year = %d, " | |
| "display_name = %s, " | |
| "speaker_flag = %d, " | |
| "audio_mode_count = %d\n", | |
| __func__, | |
| sink->edid_caps.manufacturer_id, | |
| sink->edid_caps.product_id, | |
| sink->edid_caps.serial_number, | |
| sink->edid_caps.manufacture_week, | |
| sink->edid_caps.manufacture_year, | |
| sink->edid_caps.display_name, | |
| sink->edid_caps.speaker_flags, | |
| sink->edid_caps.audio_mode_count); | |
| for (i = 0; i < sink->edid_caps.audio_mode_count; i++) { | |
| DC_LOG_DETECTION_EDID_PARSER("%s: mode number = %d, " | |
| "format_code = %d, " | |
| "channel_count = %d, " | |
| "sample_rate = %d, " | |
| "sample_size = %d\n", | |
| __func__, | |
| i, | |
| sink->edid_caps.audio_modes[i].format_code, | |
| sink->edid_caps.audio_modes[i].channel_count, | |
| sink->edid_caps.audio_modes[i].sample_rate, | |
| sink->edid_caps.audio_modes[i].sample_size); | |
| } | |
| if (link->connector_signal == SIGNAL_TYPE_EDP) { | |
| // Init dc_panel_config by HW config | |
| if (dc_ctx->dc->res_pool->funcs->get_panel_config_defaults) | |
| dc_ctx->dc->res_pool->funcs->get_panel_config_defaults(&link->panel_config); | |
| // Pickup base DM settings | |
| dm_helpers_init_panel_settings(dc_ctx, &link->panel_config, sink); | |
| // Override dc_panel_config if system has specific settings | |
| dm_helpers_override_panel_settings(dc_ctx, link); | |
| //sink only can use supported link rate table, we are foreced to enable it | |
| if (link->reported_link_cap.link_rate == LINK_RATE_UNKNOWN) | |
| link->panel_config.ilr.optimize_edp_link_rate = true; | |
| link->reported_link_cap.link_rate = get_max_edp_link_rate(link); | |
| } | |
| } else { | |
| /* From Connected-to-Disconnected. */ | |
| link->type = dc_connection_none; | |
| sink_caps.signal = SIGNAL_TYPE_NONE; | |
| memset(&link->hdcp_caps, 0, sizeof(struct hdcp_caps)); | |
| /* When we unplug a passive DP-HDMI dongle connection, dongle_max_pix_clk | |
| * is not cleared. If we emulate a DP signal on this connection, it thinks | |
| * the dongle is still there and limits the number of modes we can emulate. | |
| * Clear dongle_max_pix_clk on disconnect to fix this | |
| */ | |
| link->dongle_max_pix_clk = 0; | |
| dc_link_clear_dprx_states(link); | |
| dp_trace_reset(link); | |
| } | |
| LINK_INFO("link=%d, dc_sink_in=%p is now %s prev_sink=%p edid same=%d\n", | |
| link->link_index, sink, | |
| (sink_caps.signal == | |
| SIGNAL_TYPE_NONE ? "Disconnected" : "Connected"), | |
| prev_sink, same_edid); | |
| if (prev_sink) | |
| dc_sink_release(prev_sink); | |
| return true; | |
| } | |
| /** | |
| * link_detect_connection_type_analog() - Determines if an analog sink is connected. | |
| * | |
| * @link: DC link to evaluate (must support analog signalling). | |
| * @type: Updated with the detected connection type: | |
| * dc_connection_single (analog via DDC), | |
| * dc_connection_analog_load (via load-detect), | |
| * or dc_connection_none. | |
| * | |
| * Return: true if detection completed. | |
| */ | |
| static bool link_detect_connection_type_analog(struct dc_link *link, enum dc_connection_type *type) | |
| { | |
| /* Don't care about connectors that don't support an analog signal. */ | |
| ASSERT(dc_connector_supports_analog(link->link_id.id)); | |
| if (link_detect_ddc_probe(link)) { | |
| *type = dc_connection_single; | |
| return true; | |
| } | |
| if (link_detect_dac_load_detect(link)) { | |
| *type = dc_connection_analog_load; | |
| return true; | |
| } | |
| *type = dc_connection_none; | |
| return true; | |
| } | |
| /* | |
| * link_detect_connection_type() - Determine if there is a sink connected | |
| * | |
| * @type: Returned connection type | |
| * Does not detect downstream devices, such as MST sinks | |
| * or display connected through active dongles | |
| */ | |
| bool link_detect_connection_type(struct dc_link *link, enum dc_connection_type *type) | |
| { | |
| if (link->connector_signal == SIGNAL_TYPE_LVDS) { | |
| *type = dc_connection_single; | |
| return true; | |
| } | |
| /* Ignore the HPD pin (if any) for analog connectors. | |
| * Instead rely on DDC and DAC. | |
| * | |
| * - VGA connectors don't have any HPD at all. | |
| * - Some DVI-A cables don't connect the HPD pin. | |
| * - Some DVI-A cables pull up the HPD pin. | |
| * (So it's high even when no display is connected.) | |
| */ | |
| if (dc_connector_supports_analog(link->link_id.id)) | |
| return link_detect_connection_type_analog(link, type); | |
| if (link->connector_signal == SIGNAL_TYPE_EDP) { | |
| /*in case it is not on*/ | |
| if (!link->dc->config.edp_no_power_sequencing) | |
| link->dc->hwss.edp_power_control(link, true); | |
| link->dc->hwss.edp_wait_for_hpd_ready(link, true); | |
| } | |
| /* Link may not have physical HPD pin. */ | |
| if (link->ep_type != DISPLAY_ENDPOINT_PHY) { | |
| if (link->is_hpd_pending || !dpia_query_hpd_status(link)) | |
| *type = dc_connection_none; | |
| else | |
| *type = dc_connection_single; | |
| return true; | |
| } | |
| if (link_get_hpd_state(link)) { | |
| *type = dc_connection_single; | |
| /* TODO: need to do the actual detection */ | |
| } else { | |
| *type = dc_connection_none; | |
| if (link->connector_signal == SIGNAL_TYPE_EDP) { | |
| /* eDP is not connected, power down it */ | |
| if (!link->dc->config.edp_no_power_sequencing) | |
| link->dc->hwss.edp_power_control(link, false); | |
| } | |
| } | |
| return true; | |
| } | |
| bool link_detect(struct dc_link *link, enum dc_detect_reason reason) | |
| { | |
| bool is_local_sink_detect_success; | |
| bool is_delegated_to_mst_top_mgr = false; | |
| enum dc_connection_type pre_link_type = link->type; | |
| is_local_sink_detect_success = detect_link_and_local_sink(link, reason); | |
| if (is_local_sink_detect_success && link->local_sink) { | |
| verify_link_capability(link, reason); | |
| } | |
| DC_LOG_DC("%s: link_index=%d is_local_sink_detect_success=%d pre_link_type=%d link_type=%d\n", __func__, | |
| link->link_index, is_local_sink_detect_success, pre_link_type, link->type); | |
| if (is_local_sink_detect_success && link->local_sink && | |
| dc_is_dp_signal(link->local_sink->sink_signal) && | |
| link->dpcd_caps.is_mst_capable) | |
| is_delegated_to_mst_top_mgr = discover_dp_mst_topology(link, reason); | |
| if (pre_link_type == dc_connection_mst_branch && | |
| link->type != dc_connection_mst_branch) | |
| is_delegated_to_mst_top_mgr = link_reset_cur_dp_mst_topology(link); | |
| return is_local_sink_detect_success && !is_delegated_to_mst_top_mgr; | |
| } | |
| void link_clear_dprx_states(struct dc_link *link) | |
| { | |
| memset(&link->dprx_states, 0, sizeof(link->dprx_states)); | |
| } | |
| bool link_is_hdcp14(struct dc_link *link, enum signal_type signal) | |
| { | |
| bool ret = false; | |
| switch (signal) { | |
| case SIGNAL_TYPE_DISPLAY_PORT: | |
| case SIGNAL_TYPE_DISPLAY_PORT_MST: | |
| ret = link->hdcp_caps.bcaps.bits.HDCP_CAPABLE; | |
| break; | |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: | |
| case SIGNAL_TYPE_DVI_DUAL_LINK: | |
| case SIGNAL_TYPE_HDMI_TYPE_A: | |
| /* HDMI doesn't tell us its HDCP(1.4) capability, so assume to always be capable, | |
| * we can poll for bksv but some displays have an issue with this. Since its so rare | |
| * for a display to not be 1.4 capable, this assumtion is ok | |
| */ | |
| ret = true; | |
| break; | |
| default: | |
| break; | |
| } | |
| return ret; | |
| } | |
| bool link_is_hdcp22(struct dc_link *link, enum signal_type signal) | |
| { | |
| bool ret = false; | |
| switch (signal) { | |
| case SIGNAL_TYPE_DISPLAY_PORT: | |
| case SIGNAL_TYPE_DISPLAY_PORT_MST: | |
| ret = (link->hdcp_caps.bcaps.bits.HDCP_CAPABLE && | |
| link->hdcp_caps.rx_caps.fields.byte0.hdcp_capable && | |
| (link->hdcp_caps.rx_caps.fields.version == 0x2)) ? 1 : 0; | |
| break; | |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: | |
| case SIGNAL_TYPE_DVI_DUAL_LINK: | |
| case SIGNAL_TYPE_HDMI_TYPE_A: | |
| case SIGNAL_TYPE_HDMI_FRL: | |
| ret = (link->hdcp_caps.rx_caps.fields.version == 0x4) ? 1:0; | |
| break; | |
| default: | |
| break; | |
| } | |
| return ret; | |
| } | |
| const struct dc_link_status *link_get_status(const struct dc_link *link) | |
| { | |
| return &link->link_status; | |
| } | |
| static bool link_add_remote_sink_helper(struct dc_link *dc_link, struct dc_sink *sink) | |
| { | |
| if (dc_link->sink_count >= MAX_SINKS_PER_LINK) { | |
| BREAK_TO_DEBUGGER(); | |
| return false; | |
| } | |
| dc_sink_retain(sink); | |
| dc_link->remote_sinks[dc_link->sink_count] = sink; | |
| dc_link->sink_count++; | |
| return true; | |
| } | |
| struct dc_sink *link_add_remote_sink( | |
| struct dc_link *link, | |
| const uint8_t *edid, | |
| unsigned int len, | |
| struct dc_sink_init_data *init_data) | |
| { | |
| struct dc_sink *dc_sink; | |
| enum dc_edid_status edid_status; | |
| if (len > DC_MAX_EDID_BUFFER_SIZE) { | |
| dm_error("Max EDID buffer size breached!\n"); | |
| return NULL; | |
| } | |
| if (!init_data) { | |
| BREAK_TO_DEBUGGER(); | |
| return NULL; | |
| } | |
| if (!init_data->link) { | |
| BREAK_TO_DEBUGGER(); | |
| return NULL; | |
| } | |
| dc_sink = dc_sink_create(init_data); | |
| if (!dc_sink) | |
| return NULL; | |
| memmove(dc_sink->dc_edid.raw_edid, edid, len); | |
| dc_sink->dc_edid.length = len; | |
| if (!link_add_remote_sink_helper( | |
| link, | |
| dc_sink)) | |
| goto fail_add_sink; | |
| edid_status = dm_helpers_parse_edid_caps( | |
| link, | |
| &dc_sink->dc_edid, | |
| &dc_sink->edid_caps); | |
| /* | |
| * Treat device as no EDID device if EDID | |
| * parsing fails | |
| */ | |
| if (edid_status != EDID_OK && edid_status != EDID_PARTIAL_VALID) { | |
| dc_sink->dc_edid.length = 0; | |
| dm_error("Bad EDID, status%d!\n", edid_status); | |
| } | |
| return dc_sink; | |
| fail_add_sink: | |
| dc_sink_release(dc_sink); | |
| return NULL; | |
| } | |
| void link_remove_remote_sink(struct dc_link *link, struct dc_sink *sink) | |
| { | |
| unsigned int i; | |
| if (!link->sink_count) { | |
| BREAK_TO_DEBUGGER(); | |
| return; | |
| } | |
| for (i = 0; i < link->sink_count; i++) { | |
| if (link->remote_sinks[i] == sink) { | |
| dc_sink_release(sink); | |
| link->remote_sinks[i] = NULL; | |
| /* shrink array to remove empty place */ | |
| while (i < link->sink_count - 1) { | |
| link->remote_sinks[i] = link->remote_sinks[i+1]; | |
| i++; | |
| } | |
| link->remote_sinks[i] = NULL; | |
| link->sink_count--; | |
| return; | |
| } | |
| } | |
| } |