| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * AXP20x pinctrl and GPIO driver | |
| * | |
| * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> | |
| * Copyright (C) 2017 Quentin Schulz <quentin.schulz@free-electrons.com> | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/device.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mfd/axp20x.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/slab.h> | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/pinctrl/pinconf-generic.h> | |
| #include <linux/pinctrl/pinctrl.h> | |
| #include <linux/pinctrl/pinmux.h> | |
| #define AXP20X_GPIO_FUNCTIONS 0x7 | |
| #define AXP20X_GPIO_FUNCTION_OUT_LOW 0 | |
| #define AXP20X_GPIO_FUNCTION_OUT_HIGH 1 | |
| #define AXP20X_GPIO_FUNCTION_INPUT 2 | |
| #define AXP20X_GPIO3_FUNCTIONS GENMASK(2, 1) | |
| #define AXP20X_GPIO3_FUNCTION_OUT_LOW 0 | |
| #define AXP20X_GPIO3_FUNCTION_OUT_HIGH 2 | |
| #define AXP20X_GPIO3_FUNCTION_INPUT 4 | |
| #define AXP20X_FUNC_GPIO_OUT 0 | |
| #define AXP20X_FUNC_GPIO_IN 1 | |
| #define AXP20X_FUNC_LDO 2 | |
| #define AXP20X_FUNC_ADC 3 | |
| #define AXP20X_FUNCS_NB 4 | |
| #define AXP20X_MUX_GPIO_OUT 0 | |
| #define AXP20X_MUX_GPIO_IN BIT(1) | |
| #define AXP20X_MUX_ADC BIT(2) | |
| #define AXP813_MUX_ADC (BIT(2) | BIT(0)) | |
| struct axp20x_pctrl_desc { | |
| const struct pinctrl_pin_desc *pins; | |
| unsigned int npins; | |
| /* Stores the pins supporting LDO function. Bit offset is pin number. */ | |
| u8 ldo_mask; | |
| /* Stores the pins supporting ADC function. Bit offset is pin number. */ | |
| u8 adc_mask; | |
| u8 gpio_status_offset; | |
| u8 adc_mux; | |
| }; | |
| struct axp20x_pinctrl_function { | |
| const char *name; | |
| unsigned int muxval; | |
| const char **groups; | |
| unsigned int ngroups; | |
| }; | |
| struct axp20x_pctl { | |
| struct gpio_chip chip; | |
| struct regmap *regmap; | |
| struct pinctrl_dev *pctl_dev; | |
| struct device *dev; | |
| const struct axp20x_pctrl_desc *desc; | |
| struct axp20x_pinctrl_function funcs[AXP20X_FUNCS_NB]; | |
| }; | |
| static const struct pinctrl_pin_desc axp209_pins[] = { | |
| PINCTRL_PIN(0, "GPIO0"), | |
| PINCTRL_PIN(1, "GPIO1"), | |
| PINCTRL_PIN(2, "GPIO2"), | |
| PINCTRL_PIN(3, "GPIO3"), | |
| }; | |
| static const struct pinctrl_pin_desc axp22x_pins[] = { | |
| PINCTRL_PIN(0, "GPIO0"), | |
| PINCTRL_PIN(1, "GPIO1"), | |
| }; | |
| static const struct axp20x_pctrl_desc axp20x_data = { | |
| .pins = axp209_pins, | |
| .npins = ARRAY_SIZE(axp209_pins), | |
| .ldo_mask = BIT(0) | BIT(1), | |
| .adc_mask = BIT(0) | BIT(1), | |
| .gpio_status_offset = 4, | |
| .adc_mux = AXP20X_MUX_ADC, | |
| }; | |
| static const struct axp20x_pctrl_desc axp22x_data = { | |
| .pins = axp22x_pins, | |
| .npins = ARRAY_SIZE(axp22x_pins), | |
| .ldo_mask = BIT(0) | BIT(1), | |
| .gpio_status_offset = 0, | |
| }; | |
| static const struct axp20x_pctrl_desc axp813_data = { | |
| .pins = axp22x_pins, | |
| .npins = ARRAY_SIZE(axp22x_pins), | |
| .ldo_mask = BIT(0) | BIT(1), | |
| .adc_mask = BIT(0), | |
| .gpio_status_offset = 0, | |
| .adc_mux = AXP813_MUX_ADC, | |
| }; | |
| static int axp20x_gpio_get_reg(unsigned int offset) | |
| { | |
| switch (offset) { | |
| case 0: | |
| return AXP20X_GPIO0_CTRL; | |
| case 1: | |
| return AXP20X_GPIO1_CTRL; | |
| case 2: | |
| return AXP20X_GPIO2_CTRL; | |
| } | |
| return -EINVAL; | |
| } | |
| static int axp20x_gpio_get(struct gpio_chip *chip, unsigned int offset) | |
| { | |
| struct axp20x_pctl *pctl = gpiochip_get_data(chip); | |
| unsigned int val; | |
| int ret; | |
| /* AXP209 has GPIO3 status sharing the settings register */ | |
| if (offset == 3) { | |
| ret = regmap_read(pctl->regmap, AXP20X_GPIO3_CTRL, &val); | |
| if (ret) | |
| return ret; | |
| return !!(val & BIT(0)); | |
| } | |
| ret = regmap_read(pctl->regmap, AXP20X_GPIO20_SS, &val); | |
| if (ret) | |
| return ret; | |
| return !!(val & BIT(offset + pctl->desc->gpio_status_offset)); | |
| } | |
| static int axp20x_gpio_get_direction(struct gpio_chip *chip, | |
| unsigned int offset) | |
| { | |
| struct axp20x_pctl *pctl = gpiochip_get_data(chip); | |
| unsigned int val; | |
| int reg, ret; | |
| /* AXP209 GPIO3 settings have a different layout */ | |
| if (offset == 3) { | |
| ret = regmap_read(pctl->regmap, AXP20X_GPIO3_CTRL, &val); | |
| if (ret) | |
| return ret; | |
| if (val & AXP20X_GPIO3_FUNCTION_INPUT) | |
| return GPIO_LINE_DIRECTION_IN; | |
| return GPIO_LINE_DIRECTION_OUT; | |
| } | |
| reg = axp20x_gpio_get_reg(offset); | |
| if (reg < 0) | |
| return reg; | |
| ret = regmap_read(pctl->regmap, reg, &val); | |
| if (ret) | |
| return ret; | |
| /* | |
| * This shouldn't really happen if the pin is in use already, | |
| * or if it's not in use yet, it doesn't matter since we're | |
| * going to change the value soon anyway. Default to output. | |
| */ | |
| if ((val & AXP20X_GPIO_FUNCTIONS) > 2) | |
| return GPIO_LINE_DIRECTION_OUT; | |
| /* | |
| * The GPIO directions are the three lowest values. | |
| * 2 is input, 0 and 1 are output | |
| */ | |
| if (val & 2) | |
| return GPIO_LINE_DIRECTION_IN; | |
| return GPIO_LINE_DIRECTION_OUT; | |
| } | |
| static int axp20x_gpio_output(struct gpio_chip *chip, unsigned int offset, | |
| int value) | |
| { | |
| return chip->set(chip, offset, value); | |
| } | |
| static int axp20x_gpio_set(struct gpio_chip *chip, unsigned int offset, | |
| int value) | |
| { | |
| struct axp20x_pctl *pctl = gpiochip_get_data(chip); | |
| int reg; | |
| /* AXP209 has GPIO3 status sharing the settings register */ | |
| if (offset == 3) | |
| return regmap_update_bits(pctl->regmap, AXP20X_GPIO3_CTRL, | |
| AXP20X_GPIO3_FUNCTIONS, | |
| value ? | |
| AXP20X_GPIO3_FUNCTION_OUT_HIGH : | |
| AXP20X_GPIO3_FUNCTION_OUT_LOW); | |
| reg = axp20x_gpio_get_reg(offset); | |
| if (reg < 0) | |
| return reg; | |
| return regmap_update_bits(pctl->regmap, reg, AXP20X_GPIO_FUNCTIONS, | |
| value ? AXP20X_GPIO_FUNCTION_OUT_HIGH : | |
| AXP20X_GPIO_FUNCTION_OUT_LOW); | |
| } | |
| static int axp20x_pmx_set(struct pinctrl_dev *pctldev, unsigned int offset, | |
| u8 config) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| int reg; | |
| /* AXP209 GPIO3 settings have a different layout */ | |
| if (offset == 3) | |
| return regmap_update_bits(pctl->regmap, AXP20X_GPIO3_CTRL, | |
| AXP20X_GPIO3_FUNCTIONS, | |
| config == AXP20X_MUX_GPIO_OUT ? AXP20X_GPIO3_FUNCTION_OUT_LOW : | |
| AXP20X_GPIO3_FUNCTION_INPUT); | |
| reg = axp20x_gpio_get_reg(offset); | |
| if (reg < 0) | |
| return reg; | |
| return regmap_update_bits(pctl->regmap, reg, AXP20X_GPIO_FUNCTIONS, | |
| config); | |
| } | |
| static int axp20x_pmx_func_cnt(struct pinctrl_dev *pctldev) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| return ARRAY_SIZE(pctl->funcs); | |
| } | |
| static const char *axp20x_pmx_func_name(struct pinctrl_dev *pctldev, | |
| unsigned int selector) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| return pctl->funcs[selector].name; | |
| } | |
| static int axp20x_pmx_func_groups(struct pinctrl_dev *pctldev, | |
| unsigned int selector, | |
| const char * const **groups, | |
| unsigned int *num_groups) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| *groups = pctl->funcs[selector].groups; | |
| *num_groups = pctl->funcs[selector].ngroups; | |
| return 0; | |
| } | |
| static int axp20x_pmx_set_mux(struct pinctrl_dev *pctldev, | |
| unsigned int function, unsigned int group) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| unsigned int mask; | |
| /* Every pin supports GPIO_OUT and GPIO_IN functions */ | |
| if (function <= AXP20X_FUNC_GPIO_IN) | |
| return axp20x_pmx_set(pctldev, group, | |
| pctl->funcs[function].muxval); | |
| if (function == AXP20X_FUNC_LDO) | |
| mask = pctl->desc->ldo_mask; | |
| else | |
| mask = pctl->desc->adc_mask; | |
| if (!(BIT(group) & mask)) | |
| return -EINVAL; | |
| /* | |
| * We let the regulator framework handle the LDO muxing as muxing bits | |
| * are basically also regulators on/off bits. It's better not to enforce | |
| * any state of the regulator when selecting LDO mux so that we don't | |
| * interfere with the regulator driver. | |
| */ | |
| if (function == AXP20X_FUNC_LDO) | |
| return 0; | |
| return axp20x_pmx_set(pctldev, group, pctl->funcs[function].muxval); | |
| } | |
| static int axp20x_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, | |
| struct pinctrl_gpio_range *range, | |
| unsigned int offset, bool input) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| if (input) | |
| return axp20x_pmx_set(pctldev, offset, | |
| pctl->funcs[AXP20X_FUNC_GPIO_IN].muxval); | |
| return axp20x_pmx_set(pctldev, offset, | |
| pctl->funcs[AXP20X_FUNC_GPIO_OUT].muxval); | |
| } | |
| static const struct pinmux_ops axp20x_pmx_ops = { | |
| .get_functions_count = axp20x_pmx_func_cnt, | |
| .get_function_name = axp20x_pmx_func_name, | |
| .get_function_groups = axp20x_pmx_func_groups, | |
| .set_mux = axp20x_pmx_set_mux, | |
| .gpio_set_direction = axp20x_pmx_gpio_set_direction, | |
| .strict = true, | |
| }; | |
| static int axp20x_groups_cnt(struct pinctrl_dev *pctldev) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| return pctl->desc->npins; | |
| } | |
| static int axp20x_group_pins(struct pinctrl_dev *pctldev, unsigned int selector, | |
| const unsigned int **pins, unsigned int *num_pins) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| *pins = (unsigned int *)&pctl->desc->pins[selector]; | |
| *num_pins = 1; | |
| return 0; | |
| } | |
| static const char *axp20x_group_name(struct pinctrl_dev *pctldev, | |
| unsigned int selector) | |
| { | |
| struct axp20x_pctl *pctl = pinctrl_dev_get_drvdata(pctldev); | |
| return pctl->desc->pins[selector].name; | |
| } | |
| static const struct pinctrl_ops axp20x_pctrl_ops = { | |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_group, | |
| .dt_free_map = pinconf_generic_dt_free_map, | |
| .get_groups_count = axp20x_groups_cnt, | |
| .get_group_name = axp20x_group_name, | |
| .get_group_pins = axp20x_group_pins, | |
| }; | |
| static int axp20x_funcs_groups_from_mask(struct device *dev, unsigned int mask, | |
| unsigned int mask_len, | |
| struct axp20x_pinctrl_function *func, | |
| const struct pinctrl_pin_desc *pins) | |
| { | |
| unsigned long int mask_cpy = mask; | |
| const char **group; | |
| unsigned int ngroups = hweight8(mask); | |
| int bit; | |
| func->ngroups = ngroups; | |
| if (func->ngroups > 0) { | |
| func->groups = devm_kcalloc(dev, | |
| ngroups, sizeof(const char *), | |
| GFP_KERNEL); | |
| if (!func->groups) | |
| return -ENOMEM; | |
| group = func->groups; | |
| for_each_set_bit(bit, &mask_cpy, mask_len) { | |
| *group = pins[bit].name; | |
| group++; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int axp20x_build_funcs_groups(struct platform_device *pdev) | |
| { | |
| struct axp20x_pctl *pctl = platform_get_drvdata(pdev); | |
| int i, ret, pin, npins = pctl->desc->npins; | |
| pctl->funcs[AXP20X_FUNC_GPIO_OUT].name = "gpio_out"; | |
| pctl->funcs[AXP20X_FUNC_GPIO_OUT].muxval = AXP20X_MUX_GPIO_OUT; | |
| pctl->funcs[AXP20X_FUNC_GPIO_IN].name = "gpio_in"; | |
| pctl->funcs[AXP20X_FUNC_GPIO_IN].muxval = AXP20X_MUX_GPIO_IN; | |
| pctl->funcs[AXP20X_FUNC_LDO].name = "ldo"; | |
| /* | |
| * Muxval for LDO is useless as we won't use it. | |
| * See comment in axp20x_pmx_set_mux. | |
| */ | |
| pctl->funcs[AXP20X_FUNC_ADC].name = "adc"; | |
| pctl->funcs[AXP20X_FUNC_ADC].muxval = pctl->desc->adc_mux; | |
| /* Every pin supports GPIO_OUT and GPIO_IN functions */ | |
| for (i = 0; i <= AXP20X_FUNC_GPIO_IN; i++) { | |
| pctl->funcs[i].ngroups = npins; | |
| pctl->funcs[i].groups = devm_kcalloc(&pdev->dev, | |
| npins, sizeof(char *), | |
| GFP_KERNEL); | |
| if (!pctl->funcs[i].groups) | |
| return -ENOMEM; | |
| for (pin = 0; pin < npins; pin++) | |
| pctl->funcs[i].groups[pin] = pctl->desc->pins[pin].name; | |
| } | |
| ret = axp20x_funcs_groups_from_mask(&pdev->dev, pctl->desc->ldo_mask, | |
| npins, &pctl->funcs[AXP20X_FUNC_LDO], | |
| pctl->desc->pins); | |
| if (ret) | |
| return ret; | |
| ret = axp20x_funcs_groups_from_mask(&pdev->dev, pctl->desc->adc_mask, | |
| npins, &pctl->funcs[AXP20X_FUNC_ADC], | |
| pctl->desc->pins); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static const struct of_device_id axp20x_pctl_match[] = { | |
| { .compatible = "x-powers,axp209-gpio", .data = &axp20x_data, }, | |
| { .compatible = "x-powers,axp221-gpio", .data = &axp22x_data, }, | |
| { .compatible = "x-powers,axp813-gpio", .data = &axp813_data, }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, axp20x_pctl_match); | |
| static int axp20x_pctl_probe(struct platform_device *pdev) | |
| { | |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); | |
| struct axp20x_pctl *pctl; | |
| struct device *dev = &pdev->dev; | |
| struct pinctrl_desc *pctrl_desc; | |
| int ret; | |
| if (!axp20x) { | |
| dev_err(&pdev->dev, "Parent drvdata not set\n"); | |
| return -EINVAL; | |
| } | |
| pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); | |
| if (!pctl) | |
| return -ENOMEM; | |
| pctl->chip.base = -1; | |
| pctl->chip.can_sleep = true; | |
| pctl->chip.request = gpiochip_generic_request; | |
| pctl->chip.free = gpiochip_generic_free; | |
| pctl->chip.parent = &pdev->dev; | |
| pctl->chip.label = dev_name(&pdev->dev); | |
| pctl->chip.owner = THIS_MODULE; | |
| pctl->chip.get = axp20x_gpio_get; | |
| pctl->chip.get_direction = axp20x_gpio_get_direction; | |
| pctl->chip.set = axp20x_gpio_set; | |
| pctl->chip.direction_input = pinctrl_gpio_direction_input; | |
| pctl->chip.direction_output = axp20x_gpio_output; | |
| pctl->desc = of_device_get_match_data(dev); | |
| pctl->chip.ngpio = pctl->desc->npins; | |
| pctl->regmap = axp20x->regmap; | |
| pctl->dev = &pdev->dev; | |
| platform_set_drvdata(pdev, pctl); | |
| ret = axp20x_build_funcs_groups(pdev); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to build groups\n"); | |
| return ret; | |
| } | |
| pctrl_desc = devm_kzalloc(&pdev->dev, sizeof(*pctrl_desc), GFP_KERNEL); | |
| if (!pctrl_desc) | |
| return -ENOMEM; | |
| pctrl_desc->name = dev_name(&pdev->dev); | |
| pctrl_desc->owner = THIS_MODULE; | |
| pctrl_desc->pins = pctl->desc->pins; | |
| pctrl_desc->npins = pctl->desc->npins; | |
| pctrl_desc->pctlops = &axp20x_pctrl_ops; | |
| pctrl_desc->pmxops = &axp20x_pmx_ops; | |
| pctl->pctl_dev = devm_pinctrl_register(&pdev->dev, pctrl_desc, pctl); | |
| if (IS_ERR(pctl->pctl_dev)) { | |
| dev_err(&pdev->dev, "couldn't register pinctrl driver\n"); | |
| return PTR_ERR(pctl->pctl_dev); | |
| } | |
| ret = devm_gpiochip_add_data(&pdev->dev, &pctl->chip, pctl); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to register GPIO chip\n"); | |
| return ret; | |
| } | |
| ret = gpiochip_add_pin_range(&pctl->chip, dev_name(&pdev->dev), | |
| pctl->desc->pins->number, | |
| pctl->desc->pins->number, | |
| pctl->desc->npins); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to add pin range\n"); | |
| return ret; | |
| } | |
| dev_info(&pdev->dev, "AXP209 pinctrl and GPIO driver loaded\n"); | |
| return 0; | |
| } | |
| static struct platform_driver axp20x_pctl_driver = { | |
| .probe = axp20x_pctl_probe, | |
| .driver = { | |
| .name = "axp20x-gpio", | |
| .of_match_table = axp20x_pctl_match, | |
| }, | |
| }; | |
| module_platform_driver(axp20x_pctl_driver); | |
| MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); | |
| MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>"); | |
| MODULE_DESCRIPTION("AXP20x PMIC pinctrl and GPIO driver"); | |
| MODULE_LICENSE("GPL"); |