Documentation/devicetree/bindings/power/reset/toradex,smarc-ec.yaml

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/reset/toradex,smarc-ec.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Toradex Embedded Controller

maintainers:
  - Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
  - Francesco Dolcini <francesco.dolcini@toradex.com>

description: |
  The Toradex Embedded Controller (EC) is used on Toradex SMARC modules,
  primarily to manage power and reset functionalities.

  The EC provides the following functions:
    - Reads the SMARC POWER_BTN# and RESET_IN# signals and controls the PMIC accordingly.
    - Controls the SoC boot mode signals based on the SMARC BOOT_SEL# and FORCE_RECOV# inputs.
    - Manages the CARRIER_STDBY# signal in response to relevant SoC signals.

  The EC runs a small firmware, factory programmed into its internal flash, and communicates over I2C.
  It allows software to control power-off and reset functionalities of the module.

properties:
  compatible:
    items:
      - enum:
          - toradex,smarc-imx95-ec
          - toradex,smarc-imx8mp-ec
      - const: toradex,smarc-ec

  reg:
    maxItems: 1

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        reset-controller@28 {
            compatible = "toradex,smarc-imx95-ec", "toradex,smarc-ec";
            reg = <0x28>;
        };
    };