| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/clock/raspberrypi,rp1-clocks.h> |
| |
| pci_ep_bus: pci-ep-bus@1 { |
| compatible = "simple-bus"; |
| ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; |
| dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| rp1_clocks: clocks@40018000 { |
| compatible = "raspberrypi,rp1-clocks"; |
| reg = <0x00 0x40018000 0x0 0x10038>; |
| #clock-cells = <1>; |
| clocks = <&clk_rp1_xosc>; |
| assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>, |
| <&rp1_clocks RP1_PLL_SYS>, |
| <&rp1_clocks RP1_PLL_SYS_SEC>, |
| <&rp1_clocks RP1_CLK_SYS>; |
| assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE |
| <200000000>, // RP1_PLL_SYS |
| <125000000>, // RP1_PLL_SYS_SEC |
| <200000000>; // RP1_CLK_SYS |
| }; |
| |
| rp1_gpio: pinctrl@400d0000 { |
| compatible = "raspberrypi,rp1-gpio"; |
| reg = <0x00 0x400d0000 0x0 0xc000>, |
| <0x00 0x400e0000 0x0 0xc000>, |
| <0x00 0x400f0000 0x0 0xc000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, |
| <1 IRQ_TYPE_LEVEL_HIGH>, |
| <2 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| rp1_eth: ethernet@40100000 { |
| compatible = "raspberrypi,rp1-gem"; |
| reg = <0x00 0x40100000 0x0 0x4000>; |
| interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&rp1_clocks RP1_CLK_SYS>, |
| <&rp1_clocks RP1_CLK_SYS>, |
| <&rp1_clocks RP1_CLK_ETH>, |
| <&rp1_clocks RP1_CLK_ETH_TSU>; |
| clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; |
| local-mac-address = [00 00 00 00 00 00]; |
| status = "disabled"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| rp1_usb0: usb@40200000 { |
| compatible = "snps,dwc3"; |
| reg = <0x00 0x40200000 0x0 0x100000>; |
| interrupts = <31 IRQ_TYPE_EDGE_RISING>; |
| dr_mode = "host"; |
| usb3-lpm-capable; |
| snps,dis_rxdet_inp3_quirk; |
| snps,parkmode-disable-hs-quirk; |
| snps,parkmode-disable-ss-quirk; |
| snps,tx-max-burst = /bits/ 8 <8>; |
| snps,tx-thr-num-pkt = /bits/ 8 <2>; |
| status = "disabled"; |
| }; |
| |
| rp1_usb1: usb@40300000 { |
| compatible = "snps,dwc3"; |
| reg = <0x00 0x40300000 0x0 0x100000>; |
| interrupts = <36 IRQ_TYPE_EDGE_RISING>; |
| dr_mode = "host"; |
| usb3-lpm-capable; |
| snps,dis_rxdet_inp3_quirk; |
| snps,parkmode-disable-hs-quirk; |
| snps,parkmode-disable-ss-quirk; |
| snps,tx-max-burst = /bits/ 8 <8>; |
| snps,tx-thr-num-pkt = /bits/ 8 <2>; |
| status = "disabled"; |
| }; |
| }; |