| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller | |
| * | |
| * Copyright 2022 NXP | |
| * Copyright 2024 Ideas on Board Oy | |
| */ | |
| #include <linux/array_size.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mfd/adp5585.h> | |
| #include <linux/mfd/core.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/module.h> | |
| #include <linux/regmap.h> | |
| #include <linux/types.h> | |
| static const struct mfd_cell adp5585_devs[] = { | |
| { .name = "adp5585-gpio", }, | |
| { .name = "adp5585-pwm", }, | |
| }; | |
| static const struct regmap_range adp5585_volatile_ranges[] = { | |
| regmap_reg_range(ADP5585_ID, ADP5585_GPI_STATUS_B), | |
| }; | |
| static const struct regmap_access_table adp5585_volatile_regs = { | |
| .yes_ranges = adp5585_volatile_ranges, | |
| .n_yes_ranges = ARRAY_SIZE(adp5585_volatile_ranges), | |
| }; | |
| /* | |
| * Chip variants differ in the default configuration of pull-up and pull-down | |
| * resistors, and therefore have different default register values: | |
| * | |
| * - The -00, -01 and -03 variants (collectively referred to as | |
| * ADP5585_REGMAP_00) have pull-up on all GPIO pins by default. | |
| * - The -02 variant has no default pull-up or pull-down resistors. | |
| * - The -04 variant has default pull-down resistors on all GPIO pins. | |
| */ | |
| static const u8 adp5585_regmap_defaults_00[ADP5585_MAX_REG + 1] = { | |
| /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x18 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, | |
| }; | |
| static const u8 adp5585_regmap_defaults_02[ADP5585_MAX_REG + 1] = { | |
| /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, | |
| /* 0x18 */ 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, | |
| }; | |
| static const u8 adp5585_regmap_defaults_04[ADP5585_MAX_REG + 1] = { | |
| /* 0x00 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x08 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x10 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, | |
| /* 0x18 */ 0x05, 0x55, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x20 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x28 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x30 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
| /* 0x38 */ 0x00, 0x00, 0x00, 0x00, 0x00, | |
| }; | |
| enum adp5585_regmap_type { | |
| ADP5585_REGMAP_00, | |
| ADP5585_REGMAP_02, | |
| ADP5585_REGMAP_04, | |
| }; | |
| static const struct regmap_config adp5585_regmap_configs[] = { | |
| [ADP5585_REGMAP_00] = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = ADP5585_MAX_REG, | |
| .volatile_table = &adp5585_volatile_regs, | |
| .cache_type = REGCACHE_MAPLE, | |
| .reg_defaults_raw = adp5585_regmap_defaults_00, | |
| .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_00), | |
| }, | |
| [ADP5585_REGMAP_02] = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = ADP5585_MAX_REG, | |
| .volatile_table = &adp5585_volatile_regs, | |
| .cache_type = REGCACHE_MAPLE, | |
| .reg_defaults_raw = adp5585_regmap_defaults_02, | |
| .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_02), | |
| }, | |
| [ADP5585_REGMAP_04] = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = ADP5585_MAX_REG, | |
| .volatile_table = &adp5585_volatile_regs, | |
| .cache_type = REGCACHE_MAPLE, | |
| .reg_defaults_raw = adp5585_regmap_defaults_04, | |
| .num_reg_defaults_raw = sizeof(adp5585_regmap_defaults_04), | |
| }, | |
| }; | |
| static int adp5585_i2c_probe(struct i2c_client *i2c) | |
| { | |
| const struct regmap_config *regmap_config; | |
| struct adp5585_dev *adp5585; | |
| unsigned int id; | |
| int ret; | |
| adp5585 = devm_kzalloc(&i2c->dev, sizeof(*adp5585), GFP_KERNEL); | |
| if (!adp5585) | |
| return -ENOMEM; | |
| i2c_set_clientdata(i2c, adp5585); | |
| regmap_config = i2c_get_match_data(i2c); | |
| adp5585->regmap = devm_regmap_init_i2c(i2c, regmap_config); | |
| if (IS_ERR(adp5585->regmap)) | |
| return dev_err_probe(&i2c->dev, PTR_ERR(adp5585->regmap), | |
| "Failed to initialize register map\n"); | |
| ret = regmap_read(adp5585->regmap, ADP5585_ID, &id); | |
| if (ret) | |
| return dev_err_probe(&i2c->dev, ret, | |
| "Failed to read device ID\n"); | |
| if ((id & ADP5585_MAN_ID_MASK) != ADP5585_MAN_ID_VALUE) | |
| return dev_err_probe(&i2c->dev, -ENODEV, | |
| "Invalid device ID 0x%02x\n", id); | |
| ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, | |
| adp5585_devs, ARRAY_SIZE(adp5585_devs), | |
| NULL, 0, NULL); | |
| if (ret) | |
| return dev_err_probe(&i2c->dev, ret, | |
| "Failed to add child devices\n"); | |
| return 0; | |
| } | |
| static int adp5585_suspend(struct device *dev) | |
| { | |
| struct adp5585_dev *adp5585 = dev_get_drvdata(dev); | |
| regcache_cache_only(adp5585->regmap, true); | |
| return 0; | |
| } | |
| static int adp5585_resume(struct device *dev) | |
| { | |
| struct adp5585_dev *adp5585 = dev_get_drvdata(dev); | |
| regcache_cache_only(adp5585->regmap, false); | |
| regcache_mark_dirty(adp5585->regmap); | |
| return regcache_sync(adp5585->regmap); | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(adp5585_pm, adp5585_suspend, adp5585_resume); | |
| static const struct of_device_id adp5585_of_match[] = { | |
| { | |
| .compatible = "adi,adp5585-00", | |
| .data = &adp5585_regmap_configs[ADP5585_REGMAP_00], | |
| }, { | |
| .compatible = "adi,adp5585-01", | |
| .data = &adp5585_regmap_configs[ADP5585_REGMAP_00], | |
| }, { | |
| .compatible = "adi,adp5585-02", | |
| .data = &adp5585_regmap_configs[ADP5585_REGMAP_02], | |
| }, { | |
| .compatible = "adi,adp5585-03", | |
| .data = &adp5585_regmap_configs[ADP5585_REGMAP_00], | |
| }, { | |
| .compatible = "adi,adp5585-04", | |
| .data = &adp5585_regmap_configs[ADP5585_REGMAP_04], | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, adp5585_of_match); | |
| static struct i2c_driver adp5585_i2c_driver = { | |
| .driver = { | |
| .name = "adp5585", | |
| .of_match_table = adp5585_of_match, | |
| .pm = pm_sleep_ptr(&adp5585_pm), | |
| }, | |
| .probe = adp5585_i2c_probe, | |
| }; | |
| module_i2c_driver(adp5585_i2c_driver); | |
| MODULE_DESCRIPTION("ADP5585 core driver"); | |
| MODULE_AUTHOR("Haibo Chen <haibo.chen@nxp.com>"); | |
| MODULE_LICENSE("GPL"); |