| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/clock/mediatek,mt8188-sys-clock.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: MediaTek System Clock Controller for MT8188 | |
| maintainers: | |
| - Garmin Chang <garmin.chang@mediatek.com> | |
| description: | | |
| The clock architecture in MediaTek like below | |
| PLLs --> | |
| dividers --> | |
| muxes | |
| --> | |
| clock gate | |
| The apmixedsys provides most of PLLs which generated from SoC 26m. | |
| The topckgen provides dividers and muxes which provide the clock source to other IP blocks. | |
| The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks. | |
| The mcusys provides mux control to select the clock source in AP MCU. | |
| The device nodes also provide the system control capacity for configuration. | |
| properties: | |
| compatible: | |
| items: | |
| - enum: | |
| - mediatek,mt8188-apmixedsys | |
| - mediatek,mt8188-infracfg-ao | |
| - mediatek,mt8188-pericfg-ao | |
| - mediatek,mt8188-topckgen | |
| - const: syscon | |
| reg: | |
| maxItems: 1 | |
| '#clock-cells': | |
| const: 1 | |
| '#reset-cells': | |
| const: 1 | |
| required: | |
| - compatible | |
| - reg | |
| - '#clock-cells' | |
| additionalProperties: false | |
| examples: | |
| - | | |
| clock-controller@10000000 { | |
| compatible = "mediatek,mt8188-topckgen", "syscon"; | |
| reg = <0x10000000 0x1000>; | |
| #clock-cells = <1>; | |
| }; |