| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Dynamic DMA mapping support. | |
| * | |
| * This implementation is a fallback for platforms that do not support | |
| * I/O TLBs (aka DMA address translation hardware). | |
| * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com> | |
| * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com> | |
| * Copyright (C) 2000, 2003 Hewlett-Packard Co | |
| * David Mosberger-Tang <davidm@hpl.hp.com> | |
| * | |
| * 03/05/07 davidm Switch from PCI-DMA to generic device DMA API. | |
| * 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid | |
| * unnecessary i-cache flushing. | |
| * 04/07/.. ak Better overflow handling. Assorted fixes. | |
| * 05/09/10 linville Add support for syncing ranges, support syncing for | |
| * DMA_BIDIRECTIONAL mappings, miscellaneous cleanup. | |
| * 08/12/11 beckyb Add highmem support | |
| */ | |
| #define pr_fmt(fmt) "software IO TLB: " fmt | |
| #include <linux/cache.h> | |
| #include <linux/cc_platform.h> | |
| #include <linux/ctype.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/dma-direct.h> | |
| #include <linux/dma-map-ops.h> | |
| #include <linux/export.h> | |
| #include <linux/gfp.h> | |
| #include <linux/highmem.h> | |
| #include <linux/io.h> | |
| #include <linux/iommu-helper.h> | |
| #include <linux/init.h> | |
| #include <linux/memblock.h> | |
| #include <linux/mm.h> | |
| #include <linux/pfn.h> | |
| #include <linux/rculist.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/set_memory.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/string.h> | |
| #include <linux/swiotlb.h> | |
| #include <linux/types.h> | |
| #ifdef CONFIG_DMA_RESTRICTED_POOL | |
| #include <linux/of.h> | |
| #include <linux/of_fdt.h> | |
| #include <linux/of_reserved_mem.h> | |
| #include <linux/slab.h> | |
| #endif | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/swiotlb.h> | |
| #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) | |
| /* | |
| * Minimum IO TLB size to bother booting with. Systems with mainly | |
| * 64bit capable cards will only lightly use the swiotlb. If we can't | |
| * allocate a contiguous 1MB, we're probably in trouble anyway. | |
| */ | |
| #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) | |
| #define INVALID_PHYS_ADDR (~(phys_addr_t)0) | |
| /** | |
| * struct io_tlb_slot - IO TLB slot descriptor | |
| * @orig_addr: The original address corresponding to a mapped entry. | |
| * @alloc_size: Size of the allocated buffer. | |
| * @list: The free list describing the number of free entries available | |
| * from each index. | |
| * @pad_slots: Number of preceding padding slots. Valid only in the first | |
| * allocated non-padding slot. | |
| */ | |
| struct io_tlb_slot { | |
| phys_addr_t orig_addr; | |
| size_t alloc_size; | |
| unsigned short list; | |
| unsigned short pad_slots; | |
| }; | |
| static bool swiotlb_force_bounce; | |
| static bool swiotlb_force_disable; | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| static void swiotlb_dyn_alloc(struct work_struct *work); | |
| static struct io_tlb_mem io_tlb_default_mem = { | |
| .lock = __SPIN_LOCK_UNLOCKED(io_tlb_default_mem.lock), | |
| .pools = LIST_HEAD_INIT(io_tlb_default_mem.pools), | |
| .dyn_alloc = __WORK_INITIALIZER(io_tlb_default_mem.dyn_alloc, | |
| swiotlb_dyn_alloc), | |
| }; | |
| #else /* !CONFIG_SWIOTLB_DYNAMIC */ | |
| static struct io_tlb_mem io_tlb_default_mem; | |
| #endif /* CONFIG_SWIOTLB_DYNAMIC */ | |
| static unsigned long default_nslabs = IO_TLB_DEFAULT_SIZE >> IO_TLB_SHIFT; | |
| static unsigned long default_nareas; | |
| /** | |
| * struct io_tlb_area - IO TLB memory area descriptor | |
| * | |
| * This is a single area with a single lock. | |
| * | |
| * @used: The number of used IO TLB block. | |
| * @index: The slot index to start searching in this area for next round. | |
| * @lock: The lock to protect the above data structures in the map and | |
| * unmap calls. | |
| */ | |
| struct io_tlb_area { | |
| unsigned long used; | |
| unsigned int index; | |
| spinlock_t lock; | |
| }; | |
| /* | |
| * Round up number of slabs to the next power of 2. The last area is going | |
| * be smaller than the rest if default_nslabs is not power of two. | |
| * The number of slot in an area should be a multiple of IO_TLB_SEGSIZE, | |
| * otherwise a segment may span two or more areas. It conflicts with free | |
| * contiguous slots tracking: free slots are treated contiguous no matter | |
| * whether they cross an area boundary. | |
| * | |
| * Return true if default_nslabs is rounded up. | |
| */ | |
| static bool round_up_default_nslabs(void) | |
| { | |
| if (!default_nareas) | |
| return false; | |
| if (default_nslabs < IO_TLB_SEGSIZE * default_nareas) | |
| default_nslabs = IO_TLB_SEGSIZE * default_nareas; | |
| else if (is_power_of_2(default_nslabs)) | |
| return false; | |
| default_nslabs = roundup_pow_of_two(default_nslabs); | |
| return true; | |
| } | |
| /** | |
| * swiotlb_adjust_nareas() - adjust the number of areas and slots | |
| * @nareas: Desired number of areas. Zero is treated as 1. | |
| * | |
| * Adjust the default number of areas in a memory pool. | |
| * The default size of the memory pool may also change to meet minimum area | |
| * size requirements. | |
| */ | |
| static void swiotlb_adjust_nareas(unsigned int nareas) | |
| { | |
| if (!nareas) | |
| nareas = 1; | |
| else if (!is_power_of_2(nareas)) | |
| nareas = roundup_pow_of_two(nareas); | |
| default_nareas = nareas; | |
| pr_info("area num %d.\n", nareas); | |
| if (round_up_default_nslabs()) | |
| pr_info("SWIOTLB bounce buffer size roundup to %luMB", | |
| (default_nslabs << IO_TLB_SHIFT) >> 20); | |
| } | |
| /** | |
| * limit_nareas() - get the maximum number of areas for a given memory pool size | |
| * @nareas: Desired number of areas. | |
| * @nslots: Total number of slots in the memory pool. | |
| * | |
| * Limit the number of areas to the maximum possible number of areas in | |
| * a memory pool of the given size. | |
| * | |
| * Return: Maximum possible number of areas. | |
| */ | |
| static unsigned int limit_nareas(unsigned int nareas, unsigned long nslots) | |
| { | |
| if (nslots < nareas * IO_TLB_SEGSIZE) | |
| return nslots / IO_TLB_SEGSIZE; | |
| return nareas; | |
| } | |
| static int __init | |
| setup_io_tlb_npages(char *str) | |
| { | |
| if (isdigit(*str)) { | |
| /* avoid tail segment of size < IO_TLB_SEGSIZE */ | |
| default_nslabs = | |
| ALIGN(simple_strtoul(str, &str, 0), IO_TLB_SEGSIZE); | |
| } | |
| if (*str == ',') | |
| ++str; | |
| if (isdigit(*str)) | |
| swiotlb_adjust_nareas(simple_strtoul(str, &str, 0)); | |
| if (*str == ',') | |
| ++str; | |
| if (!strcmp(str, "force")) | |
| swiotlb_force_bounce = true; | |
| else if (!strcmp(str, "noforce")) | |
| swiotlb_force_disable = true; | |
| return 0; | |
| } | |
| early_param("swiotlb", setup_io_tlb_npages); | |
| unsigned long swiotlb_size_or_default(void) | |
| { | |
| return default_nslabs << IO_TLB_SHIFT; | |
| } | |
| void __init swiotlb_adjust_size(unsigned long size) | |
| { | |
| /* | |
| * If swiotlb parameter has not been specified, give a chance to | |
| * architectures such as those supporting memory encryption to | |
| * adjust/expand SWIOTLB size for their use. | |
| */ | |
| if (default_nslabs != IO_TLB_DEFAULT_SIZE >> IO_TLB_SHIFT) | |
| return; | |
| size = ALIGN(size, IO_TLB_SIZE); | |
| default_nslabs = ALIGN(size >> IO_TLB_SHIFT, IO_TLB_SEGSIZE); | |
| if (round_up_default_nslabs()) | |
| size = default_nslabs << IO_TLB_SHIFT; | |
| pr_info("SWIOTLB bounce buffer size adjusted to %luMB", size >> 20); | |
| } | |
| void swiotlb_print_info(void) | |
| { | |
| struct io_tlb_pool *mem = &io_tlb_default_mem.defpool; | |
| if (!mem->nslabs) { | |
| pr_warn("No low mem\n"); | |
| return; | |
| } | |
| pr_info("mapped [mem %pa-%pa] (%luMB)\n", &mem->start, &mem->end, | |
| (mem->nslabs << IO_TLB_SHIFT) >> 20); | |
| } | |
| static inline unsigned long io_tlb_offset(unsigned long val) | |
| { | |
| return val & (IO_TLB_SEGSIZE - 1); | |
| } | |
| static inline unsigned long nr_slots(u64 val) | |
| { | |
| return DIV_ROUND_UP(val, IO_TLB_SIZE); | |
| } | |
| /* | |
| * Early SWIOTLB allocation may be too early to allow an architecture to | |
| * perform the desired operations. This function allows the architecture to | |
| * call SWIOTLB when the operations are possible. It needs to be called | |
| * before the SWIOTLB memory is used. | |
| */ | |
| void __init swiotlb_update_mem_attributes(void) | |
| { | |
| struct io_tlb_pool *mem = &io_tlb_default_mem.defpool; | |
| unsigned long bytes; | |
| if (!mem->nslabs || mem->late_alloc) | |
| return; | |
| bytes = PAGE_ALIGN(mem->nslabs << IO_TLB_SHIFT); | |
| set_memory_decrypted((unsigned long)mem->vaddr, bytes >> PAGE_SHIFT); | |
| } | |
| static void swiotlb_init_io_tlb_pool(struct io_tlb_pool *mem, phys_addr_t start, | |
| unsigned long nslabs, bool late_alloc, unsigned int nareas) | |
| { | |
| void *vaddr = phys_to_virt(start); | |
| unsigned long bytes = nslabs << IO_TLB_SHIFT, i; | |
| mem->nslabs = nslabs; | |
| mem->start = start; | |
| mem->end = mem->start + bytes; | |
| mem->late_alloc = late_alloc; | |
| mem->nareas = nareas; | |
| mem->area_nslabs = nslabs / mem->nareas; | |
| for (i = 0; i < mem->nareas; i++) { | |
| spin_lock_init(&mem->areas[i].lock); | |
| mem->areas[i].index = 0; | |
| mem->areas[i].used = 0; | |
| } | |
| for (i = 0; i < mem->nslabs; i++) { | |
| mem->slots[i].list = min(IO_TLB_SEGSIZE - io_tlb_offset(i), | |
| mem->nslabs - i); | |
| mem->slots[i].orig_addr = INVALID_PHYS_ADDR; | |
| mem->slots[i].alloc_size = 0; | |
| mem->slots[i].pad_slots = 0; | |
| } | |
| memset(vaddr, 0, bytes); | |
| mem->vaddr = vaddr; | |
| return; | |
| } | |
| /** | |
| * add_mem_pool() - add a memory pool to the allocator | |
| * @mem: Software IO TLB allocator. | |
| * @pool: Memory pool to be added. | |
| */ | |
| static void add_mem_pool(struct io_tlb_mem *mem, struct io_tlb_pool *pool) | |
| { | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| spin_lock(&mem->lock); | |
| list_add_rcu(&pool->node, &mem->pools); | |
| mem->nslabs += pool->nslabs; | |
| spin_unlock(&mem->lock); | |
| #else | |
| mem->nslabs = pool->nslabs; | |
| #endif | |
| } | |
| static void __init *swiotlb_memblock_alloc(unsigned long nslabs, | |
| unsigned int flags, | |
| int (*remap)(void *tlb, unsigned long nslabs)) | |
| { | |
| size_t bytes = PAGE_ALIGN(nslabs << IO_TLB_SHIFT); | |
| void *tlb; | |
| /* | |
| * By default allocate the bounce buffer memory from low memory, but | |
| * allow to pick a location everywhere for hypervisors with guest | |
| * memory encryption. | |
| */ | |
| if (flags & SWIOTLB_ANY) | |
| tlb = memblock_alloc(bytes, PAGE_SIZE); | |
| else | |
| tlb = memblock_alloc_low(bytes, PAGE_SIZE); | |
| if (!tlb) { | |
| pr_warn("%s: Failed to allocate %zu bytes tlb structure\n", | |
| __func__, bytes); | |
| return NULL; | |
| } | |
| if (remap && remap(tlb, nslabs) < 0) { | |
| memblock_free(tlb, PAGE_ALIGN(bytes)); | |
| pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes); | |
| return NULL; | |
| } | |
| return tlb; | |
| } | |
| /* | |
| * Statically reserve bounce buffer space and initialize bounce buffer data | |
| * structures for the software IO TLB used to implement the DMA API. | |
| */ | |
| void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags, | |
| int (*remap)(void *tlb, unsigned long nslabs)) | |
| { | |
| struct io_tlb_pool *mem = &io_tlb_default_mem.defpool; | |
| unsigned long nslabs; | |
| unsigned int nareas; | |
| size_t alloc_size; | |
| void *tlb; | |
| if (!addressing_limit && !swiotlb_force_bounce) | |
| return; | |
| if (swiotlb_force_disable) | |
| return; | |
| io_tlb_default_mem.force_bounce = | |
| swiotlb_force_bounce || (flags & SWIOTLB_FORCE); | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| if (!remap) | |
| io_tlb_default_mem.can_grow = true; | |
| if (flags & SWIOTLB_ANY) | |
| io_tlb_default_mem.phys_limit = virt_to_phys(high_memory - 1); | |
| else | |
| io_tlb_default_mem.phys_limit = ARCH_LOW_ADDRESS_LIMIT; | |
| #endif | |
| if (!default_nareas) | |
| swiotlb_adjust_nareas(num_possible_cpus()); | |
| nslabs = default_nslabs; | |
| nareas = limit_nareas(default_nareas, nslabs); | |
| while ((tlb = swiotlb_memblock_alloc(nslabs, flags, remap)) == NULL) { | |
| if (nslabs <= IO_TLB_MIN_SLABS) | |
| return; | |
| nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE); | |
| nareas = limit_nareas(nareas, nslabs); | |
| } | |
| if (default_nslabs != nslabs) { | |
| pr_info("SWIOTLB bounce buffer size adjusted %lu -> %lu slabs", | |
| default_nslabs, nslabs); | |
| default_nslabs = nslabs; | |
| } | |
| alloc_size = PAGE_ALIGN(array_size(sizeof(*mem->slots), nslabs)); | |
| mem->slots = memblock_alloc(alloc_size, PAGE_SIZE); | |
| if (!mem->slots) { | |
| pr_warn("%s: Failed to allocate %zu bytes align=0x%lx\n", | |
| __func__, alloc_size, PAGE_SIZE); | |
| return; | |
| } | |
| mem->areas = memblock_alloc(array_size(sizeof(struct io_tlb_area), | |
| nareas), SMP_CACHE_BYTES); | |
| if (!mem->areas) { | |
| pr_warn("%s: Failed to allocate mem->areas.\n", __func__); | |
| return; | |
| } | |
| swiotlb_init_io_tlb_pool(mem, __pa(tlb), nslabs, false, nareas); | |
| add_mem_pool(&io_tlb_default_mem, mem); | |
| if (flags & SWIOTLB_VERBOSE) | |
| swiotlb_print_info(); | |
| } | |
| void __init swiotlb_init(bool addressing_limit, unsigned int flags) | |
| { | |
| swiotlb_init_remap(addressing_limit, flags, NULL); | |
| } | |
| /* | |
| * Systems with larger DMA zones (those that don't support ISA) can | |
| * initialize the swiotlb later using the slab allocator if needed. | |
| * This should be just like above, but with some error catching. | |
| */ | |
| int swiotlb_init_late(size_t size, gfp_t gfp_mask, | |
| int (*remap)(void *tlb, unsigned long nslabs)) | |
| { | |
| struct io_tlb_pool *mem = &io_tlb_default_mem.defpool; | |
| unsigned long nslabs = ALIGN(size >> IO_TLB_SHIFT, IO_TLB_SEGSIZE); | |
| unsigned int nareas; | |
| unsigned char *vstart = NULL; | |
| unsigned int order, area_order; | |
| bool retried = false; | |
| int rc = 0; | |
| if (io_tlb_default_mem.nslabs) | |
| return 0; | |
| if (swiotlb_force_disable) | |
| return 0; | |
| io_tlb_default_mem.force_bounce = swiotlb_force_bounce; | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| if (!remap) | |
| io_tlb_default_mem.can_grow = true; | |
| if (IS_ENABLED(CONFIG_ZONE_DMA) && (gfp_mask & __GFP_DMA)) | |
| io_tlb_default_mem.phys_limit = zone_dma_limit; | |
| else if (IS_ENABLED(CONFIG_ZONE_DMA32) && (gfp_mask & __GFP_DMA32)) | |
| io_tlb_default_mem.phys_limit = max(DMA_BIT_MASK(32), zone_dma_limit); | |
| else | |
| io_tlb_default_mem.phys_limit = virt_to_phys(high_memory - 1); | |
| #endif | |
| if (!default_nareas) | |
| swiotlb_adjust_nareas(num_possible_cpus()); | |
| retry: | |
| order = get_order(nslabs << IO_TLB_SHIFT); | |
| nslabs = SLABS_PER_PAGE << order; | |
| while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { | |
| vstart = (void *)__get_free_pages(gfp_mask | __GFP_NOWARN, | |
| order); | |
| if (vstart) | |
| break; | |
| order--; | |
| nslabs = SLABS_PER_PAGE << order; | |
| retried = true; | |
| } | |
| if (!vstart) | |
| return -ENOMEM; | |
| if (remap) | |
| rc = remap(vstart, nslabs); | |
| if (rc) { | |
| free_pages((unsigned long)vstart, order); | |
| nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE); | |
| if (nslabs < IO_TLB_MIN_SLABS) | |
| return rc; | |
| retried = true; | |
| goto retry; | |
| } | |
| if (retried) { | |
| pr_warn("only able to allocate %ld MB\n", | |
| (PAGE_SIZE << order) >> 20); | |
| } | |
| nareas = limit_nareas(default_nareas, nslabs); | |
| area_order = get_order(array_size(sizeof(*mem->areas), nareas)); | |
| mem->areas = (struct io_tlb_area *) | |
| __get_free_pages(GFP_KERNEL | __GFP_ZERO, area_order); | |
| if (!mem->areas) | |
| goto error_area; | |
| mem->slots = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, | |
| get_order(array_size(sizeof(*mem->slots), nslabs))); | |
| if (!mem->slots) | |
| goto error_slots; | |
| set_memory_decrypted((unsigned long)vstart, | |
| (nslabs << IO_TLB_SHIFT) >> PAGE_SHIFT); | |
| swiotlb_init_io_tlb_pool(mem, virt_to_phys(vstart), nslabs, true, | |
| nareas); | |
| add_mem_pool(&io_tlb_default_mem, mem); | |
| swiotlb_print_info(); | |
| return 0; | |
| error_slots: | |
| free_pages((unsigned long)mem->areas, area_order); | |
| error_area: | |
| free_pages((unsigned long)vstart, order); | |
| return -ENOMEM; | |
| } | |
| void __init swiotlb_exit(void) | |
| { | |
| struct io_tlb_pool *mem = &io_tlb_default_mem.defpool; | |
| unsigned long tbl_vaddr; | |
| size_t tbl_size, slots_size; | |
| unsigned int area_order; | |
| if (swiotlb_force_bounce) | |
| return; | |
| if (!mem->nslabs) | |
| return; | |
| pr_info("tearing down default memory pool\n"); | |
| tbl_vaddr = (unsigned long)phys_to_virt(mem->start); | |
| tbl_size = PAGE_ALIGN(mem->end - mem->start); | |
| slots_size = PAGE_ALIGN(array_size(sizeof(*mem->slots), mem->nslabs)); | |
| set_memory_encrypted(tbl_vaddr, tbl_size >> PAGE_SHIFT); | |
| if (mem->late_alloc) { | |
| area_order = get_order(array_size(sizeof(*mem->areas), | |
| mem->nareas)); | |
| free_pages((unsigned long)mem->areas, area_order); | |
| free_pages(tbl_vaddr, get_order(tbl_size)); | |
| free_pages((unsigned long)mem->slots, get_order(slots_size)); | |
| } else { | |
| memblock_free_late(__pa(mem->areas), | |
| array_size(sizeof(*mem->areas), mem->nareas)); | |
| memblock_free_late(mem->start, tbl_size); | |
| memblock_free_late(__pa(mem->slots), slots_size); | |
| } | |
| memset(mem, 0, sizeof(*mem)); | |
| } | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| /** | |
| * alloc_dma_pages() - allocate pages to be used for DMA | |
| * @gfp: GFP flags for the allocation. | |
| * @bytes: Size of the buffer. | |
| * @phys_limit: Maximum allowed physical address of the buffer. | |
| * | |
| * Allocate pages from the buddy allocator. If successful, make the allocated | |
| * pages decrypted that they can be used for DMA. | |
| * | |
| * Return: Decrypted pages, %NULL on allocation failure, or ERR_PTR(-EAGAIN) | |
| * if the allocated physical address was above @phys_limit. | |
| */ | |
| static struct page *alloc_dma_pages(gfp_t gfp, size_t bytes, u64 phys_limit) | |
| { | |
| unsigned int order = get_order(bytes); | |
| struct page *page; | |
| phys_addr_t paddr; | |
| void *vaddr; | |
| page = alloc_pages(gfp, order); | |
| if (!page) | |
| return NULL; | |
| paddr = page_to_phys(page); | |
| if (paddr + bytes - 1 > phys_limit) { | |
| __free_pages(page, order); | |
| return ERR_PTR(-EAGAIN); | |
| } | |
| vaddr = phys_to_virt(paddr); | |
| if (set_memory_decrypted((unsigned long)vaddr, PFN_UP(bytes))) | |
| goto error; | |
| return page; | |
| error: | |
| /* Intentional leak if pages cannot be encrypted again. */ | |
| if (!set_memory_encrypted((unsigned long)vaddr, PFN_UP(bytes))) | |
| __free_pages(page, order); | |
| return NULL; | |
| } | |
| /** | |
| * swiotlb_alloc_tlb() - allocate a dynamic IO TLB buffer | |
| * @dev: Device for which a memory pool is allocated. | |
| * @bytes: Size of the buffer. | |
| * @phys_limit: Maximum allowed physical address of the buffer. | |
| * @gfp: GFP flags for the allocation. | |
| * | |
| * Return: Allocated pages, or %NULL on allocation failure. | |
| */ | |
| static struct page *swiotlb_alloc_tlb(struct device *dev, size_t bytes, | |
| u64 phys_limit, gfp_t gfp) | |
| { | |
| struct page *page; | |
| /* | |
| * Allocate from the atomic pools if memory is encrypted and | |
| * the allocation is atomic, because decrypting may block. | |
| */ | |
| if (!gfpflags_allow_blocking(gfp) && dev && force_dma_unencrypted(dev)) { | |
| void *vaddr; | |
| if (!IS_ENABLED(CONFIG_DMA_COHERENT_POOL)) | |
| return NULL; | |
| return dma_alloc_from_pool(dev, bytes, &vaddr, gfp, | |
| dma_coherent_ok); | |
| } | |
| gfp &= ~GFP_ZONEMASK; | |
| if (phys_limit <= zone_dma_limit) | |
| gfp |= __GFP_DMA; | |
| else if (phys_limit <= DMA_BIT_MASK(32)) | |
| gfp |= __GFP_DMA32; | |
| while (IS_ERR(page = alloc_dma_pages(gfp, bytes, phys_limit))) { | |
| if (IS_ENABLED(CONFIG_ZONE_DMA32) && | |
| phys_limit < DMA_BIT_MASK(64) && | |
| !(gfp & (__GFP_DMA32 | __GFP_DMA))) | |
| gfp |= __GFP_DMA32; | |
| else if (IS_ENABLED(CONFIG_ZONE_DMA) && | |
| !(gfp & __GFP_DMA)) | |
| gfp = (gfp & ~__GFP_DMA32) | __GFP_DMA; | |
| else | |
| return NULL; | |
| } | |
| return page; | |
| } | |
| /** | |
| * swiotlb_free_tlb() - free a dynamically allocated IO TLB buffer | |
| * @vaddr: Virtual address of the buffer. | |
| * @bytes: Size of the buffer. | |
| */ | |
| static void swiotlb_free_tlb(void *vaddr, size_t bytes) | |
| { | |
| if (IS_ENABLED(CONFIG_DMA_COHERENT_POOL) && | |
| dma_free_from_pool(NULL, vaddr, bytes)) | |
| return; | |
| /* Intentional leak if pages cannot be encrypted again. */ | |
| if (!set_memory_encrypted((unsigned long)vaddr, PFN_UP(bytes))) | |
| __free_pages(virt_to_page(vaddr), get_order(bytes)); | |
| } | |
| /** | |
| * swiotlb_alloc_pool() - allocate a new IO TLB memory pool | |
| * @dev: Device for which a memory pool is allocated. | |
| * @minslabs: Minimum number of slabs. | |
| * @nslabs: Desired (maximum) number of slabs. | |
| * @nareas: Number of areas. | |
| * @phys_limit: Maximum DMA buffer physical address. | |
| * @gfp: GFP flags for the allocations. | |
| * | |
| * Allocate and initialize a new IO TLB memory pool. The actual number of | |
| * slabs may be reduced if allocation of @nslabs fails. If even | |
| * @minslabs cannot be allocated, this function fails. | |
| * | |
| * Return: New memory pool, or %NULL on allocation failure. | |
| */ | |
| static struct io_tlb_pool *swiotlb_alloc_pool(struct device *dev, | |
| unsigned long minslabs, unsigned long nslabs, | |
| unsigned int nareas, u64 phys_limit, gfp_t gfp) | |
| { | |
| struct io_tlb_pool *pool; | |
| unsigned int slot_order; | |
| struct page *tlb; | |
| size_t pool_size; | |
| size_t tlb_size; | |
| if (nslabs > SLABS_PER_PAGE << MAX_PAGE_ORDER) { | |
| nslabs = SLABS_PER_PAGE << MAX_PAGE_ORDER; | |
| nareas = limit_nareas(nareas, nslabs); | |
| } | |
| pool_size = sizeof(*pool) + array_size(sizeof(*pool->areas), nareas); | |
| pool = kzalloc(pool_size, gfp); | |
| if (!pool) | |
| goto error; | |
| pool->areas = (void *)pool + sizeof(*pool); | |
| tlb_size = nslabs << IO_TLB_SHIFT; | |
| while (!(tlb = swiotlb_alloc_tlb(dev, tlb_size, phys_limit, gfp))) { | |
| if (nslabs <= minslabs) | |
| goto error_tlb; | |
| nslabs = ALIGN(nslabs >> 1, IO_TLB_SEGSIZE); | |
| nareas = limit_nareas(nareas, nslabs); | |
| tlb_size = nslabs << IO_TLB_SHIFT; | |
| } | |
| slot_order = get_order(array_size(sizeof(*pool->slots), nslabs)); | |
| pool->slots = (struct io_tlb_slot *) | |
| __get_free_pages(gfp, slot_order); | |
| if (!pool->slots) | |
| goto error_slots; | |
| swiotlb_init_io_tlb_pool(pool, page_to_phys(tlb), nslabs, true, nareas); | |
| return pool; | |
| error_slots: | |
| swiotlb_free_tlb(page_address(tlb), tlb_size); | |
| error_tlb: | |
| kfree(pool); | |
| error: | |
| return NULL; | |
| } | |
| /** | |
| * swiotlb_dyn_alloc() - dynamic memory pool allocation worker | |
| * @work: Pointer to dyn_alloc in struct io_tlb_mem. | |
| */ | |
| static void swiotlb_dyn_alloc(struct work_struct *work) | |
| { | |
| struct io_tlb_mem *mem = | |
| container_of(work, struct io_tlb_mem, dyn_alloc); | |
| struct io_tlb_pool *pool; | |
| pool = swiotlb_alloc_pool(NULL, IO_TLB_MIN_SLABS, default_nslabs, | |
| default_nareas, mem->phys_limit, GFP_KERNEL); | |
| if (!pool) { | |
| pr_warn_ratelimited("Failed to allocate new pool"); | |
| return; | |
| } | |
| add_mem_pool(mem, pool); | |
| } | |
| /** | |
| * swiotlb_dyn_free() - RCU callback to free a memory pool | |
| * @rcu: RCU head in the corresponding struct io_tlb_pool. | |
| */ | |
| static void swiotlb_dyn_free(struct rcu_head *rcu) | |
| { | |
| struct io_tlb_pool *pool = container_of(rcu, struct io_tlb_pool, rcu); | |
| size_t slots_size = array_size(sizeof(*pool->slots), pool->nslabs); | |
| size_t tlb_size = pool->end - pool->start; | |
| free_pages((unsigned long)pool->slots, get_order(slots_size)); | |
| swiotlb_free_tlb(pool->vaddr, tlb_size); | |
| kfree(pool); | |
| } | |
| /** | |
| * __swiotlb_find_pool() - find the IO TLB pool for a physical address | |
| * @dev: Device which has mapped the DMA buffer. | |
| * @paddr: Physical address within the DMA buffer. | |
| * | |
| * Find the IO TLB memory pool descriptor which contains the given physical | |
| * address, if any. This function is for use only when the dev is known to | |
| * be using swiotlb. Use swiotlb_find_pool() for the more general case | |
| * when this condition is not met. | |
| * | |
| * Return: Memory pool which contains @paddr, or %NULL if none. | |
| */ | |
| struct io_tlb_pool *__swiotlb_find_pool(struct device *dev, phys_addr_t paddr) | |
| { | |
| struct io_tlb_mem *mem = dev->dma_io_tlb_mem; | |
| struct io_tlb_pool *pool; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(pool, &mem->pools, node) { | |
| if (paddr >= pool->start && paddr < pool->end) | |
| goto out; | |
| } | |
| list_for_each_entry_rcu(pool, &dev->dma_io_tlb_pools, node) { | |
| if (paddr >= pool->start && paddr < pool->end) | |
| goto out; | |
| } | |
| pool = NULL; | |
| out: | |
| rcu_read_unlock(); | |
| return pool; | |
| } | |
| /** | |
| * swiotlb_del_pool() - remove an IO TLB pool from a device | |
| * @dev: Owning device. | |
| * @pool: Memory pool to be removed. | |
| */ | |
| static void swiotlb_del_pool(struct device *dev, struct io_tlb_pool *pool) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&dev->dma_io_tlb_lock, flags); | |
| list_del_rcu(&pool->node); | |
| spin_unlock_irqrestore(&dev->dma_io_tlb_lock, flags); | |
| call_rcu(&pool->rcu, swiotlb_dyn_free); | |
| } | |
| #endif /* CONFIG_SWIOTLB_DYNAMIC */ | |
| /** | |
| * swiotlb_dev_init() - initialize swiotlb fields in &struct device | |
| * @dev: Device to be initialized. | |
| */ | |
| void swiotlb_dev_init(struct device *dev) | |
| { | |
| dev->dma_io_tlb_mem = &io_tlb_default_mem; | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| INIT_LIST_HEAD(&dev->dma_io_tlb_pools); | |
| spin_lock_init(&dev->dma_io_tlb_lock); | |
| dev->dma_uses_io_tlb = false; | |
| #endif | |
| } | |
| /** | |
| * swiotlb_align_offset() - Get required offset into an IO TLB allocation. | |
| * @dev: Owning device. | |
| * @align_mask: Allocation alignment mask. | |
| * @addr: DMA address. | |
| * | |
| * Return the minimum offset from the start of an IO TLB allocation which is | |
| * required for a given buffer address and allocation alignment to keep the | |
| * device happy. | |
| * | |
| * First, the address bits covered by min_align_mask must be identical in the | |
| * original address and the bounce buffer address. High bits are preserved by | |
| * choosing a suitable IO TLB slot, but bits below IO_TLB_SHIFT require extra | |
| * padding bytes before the bounce buffer. | |
| * | |
| * Second, @align_mask specifies which bits of the first allocated slot must | |
| * be zero. This may require allocating additional padding slots, and then the | |
| * offset (in bytes) from the first such padding slot is returned. | |
| */ | |
| static unsigned int swiotlb_align_offset(struct device *dev, | |
| unsigned int align_mask, u64 addr) | |
| { | |
| return addr & dma_get_min_align_mask(dev) & | |
| (align_mask | (IO_TLB_SIZE - 1)); | |
| } | |
| /* | |
| * Bounce: copy the swiotlb buffer from or back to the original dma location | |
| */ | |
| static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr, size_t size, | |
| enum dma_data_direction dir, struct io_tlb_pool *mem) | |
| { | |
| int index = (tlb_addr - mem->start) >> IO_TLB_SHIFT; | |
| phys_addr_t orig_addr = mem->slots[index].orig_addr; | |
| size_t alloc_size = mem->slots[index].alloc_size; | |
| unsigned long pfn = PFN_DOWN(orig_addr); | |
| unsigned char *vaddr = mem->vaddr + tlb_addr - mem->start; | |
| int tlb_offset; | |
| if (orig_addr == INVALID_PHYS_ADDR) | |
| return; | |
| /* | |
| * It's valid for tlb_offset to be negative. This can happen when the | |
| * "offset" returned by swiotlb_align_offset() is non-zero, and the | |
| * tlb_addr is pointing within the first "offset" bytes of the second | |
| * or subsequent slots of the allocated swiotlb area. While it's not | |
| * valid for tlb_addr to be pointing within the first "offset" bytes | |
| * of the first slot, there's no way to check for such an error since | |
| * this function can't distinguish the first slot from the second and | |
| * subsequent slots. | |
| */ | |
| tlb_offset = (tlb_addr & (IO_TLB_SIZE - 1)) - | |
| swiotlb_align_offset(dev, 0, orig_addr); | |
| orig_addr += tlb_offset; | |
| alloc_size -= tlb_offset; | |
| if (size > alloc_size) { | |
| dev_WARN_ONCE(dev, 1, | |
| "Buffer overflow detected. Allocation size: %zu. Mapping size: %zu.\n", | |
| alloc_size, size); | |
| size = alloc_size; | |
| } | |
| if (PageHighMem(pfn_to_page(pfn))) { | |
| unsigned int offset = orig_addr & ~PAGE_MASK; | |
| struct page *page; | |
| unsigned int sz = 0; | |
| unsigned long flags; | |
| while (size) { | |
| sz = min_t(size_t, PAGE_SIZE - offset, size); | |
| local_irq_save(flags); | |
| page = pfn_to_page(pfn); | |
| if (dir == DMA_TO_DEVICE) | |
| memcpy_from_page(vaddr, page, offset, sz); | |
| else | |
| memcpy_to_page(page, offset, vaddr, sz); | |
| local_irq_restore(flags); | |
| size -= sz; | |
| pfn++; | |
| vaddr += sz; | |
| offset = 0; | |
| } | |
| } else if (dir == DMA_TO_DEVICE) { | |
| memcpy(vaddr, phys_to_virt(orig_addr), size); | |
| } else { | |
| memcpy(phys_to_virt(orig_addr), vaddr, size); | |
| } | |
| } | |
| static inline phys_addr_t slot_addr(phys_addr_t start, phys_addr_t idx) | |
| { | |
| return start + (idx << IO_TLB_SHIFT); | |
| } | |
| /* | |
| * Carefully handle integer overflow which can occur when boundary_mask == ~0UL. | |
| */ | |
| static inline unsigned long get_max_slots(unsigned long boundary_mask) | |
| { | |
| return (boundary_mask >> IO_TLB_SHIFT) + 1; | |
| } | |
| static unsigned int wrap_area_index(struct io_tlb_pool *mem, unsigned int index) | |
| { | |
| if (index >= mem->area_nslabs) | |
| return 0; | |
| return index; | |
| } | |
| /* | |
| * Track the total used slots with a global atomic value in order to have | |
| * correct information to determine the high water mark. The mem_used() | |
| * function gives imprecise results because there's no locking across | |
| * multiple areas. | |
| */ | |
| #ifdef CONFIG_DEBUG_FS | |
| static void inc_used_and_hiwater(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| unsigned long old_hiwater, new_used; | |
| new_used = atomic_long_add_return(nslots, &mem->total_used); | |
| old_hiwater = atomic_long_read(&mem->used_hiwater); | |
| do { | |
| if (new_used <= old_hiwater) | |
| break; | |
| } while (!atomic_long_try_cmpxchg(&mem->used_hiwater, | |
| &old_hiwater, new_used)); | |
| } | |
| static void dec_used(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| atomic_long_sub(nslots, &mem->total_used); | |
| } | |
| #else /* !CONFIG_DEBUG_FS */ | |
| static void inc_used_and_hiwater(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| } | |
| static void dec_used(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| } | |
| #endif /* CONFIG_DEBUG_FS */ | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| #ifdef CONFIG_DEBUG_FS | |
| static void inc_transient_used(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| atomic_long_add(nslots, &mem->transient_nslabs); | |
| } | |
| static void dec_transient_used(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| atomic_long_sub(nslots, &mem->transient_nslabs); | |
| } | |
| #else /* !CONFIG_DEBUG_FS */ | |
| static void inc_transient_used(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| } | |
| static void dec_transient_used(struct io_tlb_mem *mem, unsigned int nslots) | |
| { | |
| } | |
| #endif /* CONFIG_DEBUG_FS */ | |
| #endif /* CONFIG_SWIOTLB_DYNAMIC */ | |
| /** | |
| * swiotlb_search_pool_area() - search one memory area in one pool | |
| * @dev: Device which maps the buffer. | |
| * @pool: Memory pool to be searched. | |
| * @area_index: Index of the IO TLB memory area to be searched. | |
| * @orig_addr: Original (non-bounced) IO buffer address. | |
| * @alloc_size: Total requested size of the bounce buffer, | |
| * including initial alignment padding. | |
| * @alloc_align_mask: Required alignment of the allocated buffer. | |
| * | |
| * Find a suitable sequence of IO TLB entries for the request and allocate | |
| * a buffer from the given IO TLB memory area. | |
| * This function takes care of locking. | |
| * | |
| * Return: Index of the first allocated slot, or -1 on error. | |
| */ | |
| static int swiotlb_search_pool_area(struct device *dev, struct io_tlb_pool *pool, | |
| int area_index, phys_addr_t orig_addr, size_t alloc_size, | |
| unsigned int alloc_align_mask) | |
| { | |
| struct io_tlb_area *area = pool->areas + area_index; | |
| unsigned long boundary_mask = dma_get_seg_boundary(dev); | |
| dma_addr_t tbl_dma_addr = | |
| phys_to_dma_unencrypted(dev, pool->start) & boundary_mask; | |
| unsigned long max_slots = get_max_slots(boundary_mask); | |
| unsigned int iotlb_align_mask = dma_get_min_align_mask(dev); | |
| unsigned int nslots = nr_slots(alloc_size), stride; | |
| unsigned int offset = swiotlb_align_offset(dev, 0, orig_addr); | |
| unsigned int index, slots_checked, count = 0, i; | |
| unsigned long flags; | |
| unsigned int slot_base; | |
| unsigned int slot_index; | |
| BUG_ON(!nslots); | |
| BUG_ON(area_index >= pool->nareas); | |
| /* | |
| * Historically, swiotlb allocations >= PAGE_SIZE were guaranteed to be | |
| * page-aligned in the absence of any other alignment requirements. | |
| * 'alloc_align_mask' was later introduced to specify the alignment | |
| * explicitly, however this is passed as zero for streaming mappings | |
| * and so we preserve the old behaviour there in case any drivers are | |
| * relying on it. | |
| */ | |
| if (!alloc_align_mask && !iotlb_align_mask && alloc_size >= PAGE_SIZE) | |
| alloc_align_mask = PAGE_SIZE - 1; | |
| /* | |
| * Ensure that the allocation is at least slot-aligned and update | |
| * 'iotlb_align_mask' to ignore bits that will be preserved when | |
| * offsetting into the allocation. | |
| */ | |
| alloc_align_mask |= (IO_TLB_SIZE - 1); | |
| iotlb_align_mask &= ~alloc_align_mask; | |
| /* | |
| * For mappings with an alignment requirement don't bother looping to | |
| * unaligned slots once we found an aligned one. | |
| */ | |
| stride = get_max_slots(max(alloc_align_mask, iotlb_align_mask)); | |
| spin_lock_irqsave(&area->lock, flags); | |
| if (unlikely(nslots > pool->area_nslabs - area->used)) | |
| goto not_found; | |
| slot_base = area_index * pool->area_nslabs; | |
| index = area->index; | |
| for (slots_checked = 0; slots_checked < pool->area_nslabs; ) { | |
| phys_addr_t tlb_addr; | |
| slot_index = slot_base + index; | |
| tlb_addr = slot_addr(tbl_dma_addr, slot_index); | |
| if ((tlb_addr & alloc_align_mask) || | |
| (orig_addr && (tlb_addr & iotlb_align_mask) != | |
| (orig_addr & iotlb_align_mask))) { | |
| index = wrap_area_index(pool, index + 1); | |
| slots_checked++; | |
| continue; | |
| } | |
| if (!iommu_is_span_boundary(slot_index, nslots, | |
| nr_slots(tbl_dma_addr), | |
| max_slots)) { | |
| if (pool->slots[slot_index].list >= nslots) | |
| goto found; | |
| } | |
| index = wrap_area_index(pool, index + stride); | |
| slots_checked += stride; | |
| } | |
| not_found: | |
| spin_unlock_irqrestore(&area->lock, flags); | |
| return -1; | |
| found: | |
| /* | |
| * If we find a slot that indicates we have 'nslots' number of | |
| * contiguous buffers, we allocate the buffers from that slot onwards | |
| * and set the list of free entries to '0' indicating unavailable. | |
| */ | |
| for (i = slot_index; i < slot_index + nslots; i++) { | |
| pool->slots[i].list = 0; | |
| pool->slots[i].alloc_size = alloc_size - (offset + | |
| ((i - slot_index) << IO_TLB_SHIFT)); | |
| } | |
| for (i = slot_index - 1; | |
| io_tlb_offset(i) != IO_TLB_SEGSIZE - 1 && | |
| pool->slots[i].list; i--) | |
| pool->slots[i].list = ++count; | |
| /* | |
| * Update the indices to avoid searching in the next round. | |
| */ | |
| area->index = wrap_area_index(pool, index + nslots); | |
| area->used += nslots; | |
| spin_unlock_irqrestore(&area->lock, flags); | |
| inc_used_and_hiwater(dev->dma_io_tlb_mem, nslots); | |
| return slot_index; | |
| } | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| /** | |
| * swiotlb_search_area() - search one memory area in all pools | |
| * @dev: Device which maps the buffer. | |
| * @start_cpu: Start CPU number. | |
| * @cpu_offset: Offset from @start_cpu. | |
| * @orig_addr: Original (non-bounced) IO buffer address. | |
| * @alloc_size: Total requested size of the bounce buffer, | |
| * including initial alignment padding. | |
| * @alloc_align_mask: Required alignment of the allocated buffer. | |
| * @retpool: Used memory pool, updated on return. | |
| * | |
| * Search one memory area in all pools for a sequence of slots that match the | |
| * allocation constraints. | |
| * | |
| * Return: Index of the first allocated slot, or -1 on error. | |
| */ | |
| static int swiotlb_search_area(struct device *dev, int start_cpu, | |
| int cpu_offset, phys_addr_t orig_addr, size_t alloc_size, | |
| unsigned int alloc_align_mask, struct io_tlb_pool **retpool) | |
| { | |
| struct io_tlb_mem *mem = dev->dma_io_tlb_mem; | |
| struct io_tlb_pool *pool; | |
| int area_index; | |
| int index = -1; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(pool, &mem->pools, node) { | |
| if (cpu_offset >= pool->nareas) | |
| continue; | |
| area_index = (start_cpu + cpu_offset) & (pool->nareas - 1); | |
| index = swiotlb_search_pool_area(dev, pool, area_index, | |
| orig_addr, alloc_size, | |
| alloc_align_mask); | |
| if (index >= 0) { | |
| *retpool = pool; | |
| break; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| return index; | |
| } | |
| /** | |
| * swiotlb_find_slots() - search for slots in the whole swiotlb | |
| * @dev: Device which maps the buffer. | |
| * @orig_addr: Original (non-bounced) IO buffer address. | |
| * @alloc_size: Total requested size of the bounce buffer, | |
| * including initial alignment padding. | |
| * @alloc_align_mask: Required alignment of the allocated buffer. | |
| * @retpool: Used memory pool, updated on return. | |
| * | |
| * Search through the whole software IO TLB to find a sequence of slots that | |
| * match the allocation constraints. | |
| * | |
| * Return: Index of the first allocated slot, or -1 on error. | |
| */ | |
| static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr, | |
| size_t alloc_size, unsigned int alloc_align_mask, | |
| struct io_tlb_pool **retpool) | |
| { | |
| struct io_tlb_mem *mem = dev->dma_io_tlb_mem; | |
| struct io_tlb_pool *pool; | |
| unsigned long nslabs; | |
| unsigned long flags; | |
| u64 phys_limit; | |
| int cpu, i; | |
| int index; | |
| if (alloc_size > IO_TLB_SEGSIZE * IO_TLB_SIZE) | |
| return -1; | |
| cpu = raw_smp_processor_id(); | |
| for (i = 0; i < default_nareas; ++i) { | |
| index = swiotlb_search_area(dev, cpu, i, orig_addr, alloc_size, | |
| alloc_align_mask, &pool); | |
| if (index >= 0) | |
| goto found; | |
| } | |
| if (!mem->can_grow) | |
| return -1; | |
| schedule_work(&mem->dyn_alloc); | |
| nslabs = nr_slots(alloc_size); | |
| phys_limit = min_not_zero(*dev->dma_mask, dev->bus_dma_limit); | |
| pool = swiotlb_alloc_pool(dev, nslabs, nslabs, 1, phys_limit, | |
| GFP_NOWAIT | __GFP_NOWARN); | |
| if (!pool) | |
| return -1; | |
| index = swiotlb_search_pool_area(dev, pool, 0, orig_addr, | |
| alloc_size, alloc_align_mask); | |
| if (index < 0) { | |
| swiotlb_dyn_free(&pool->rcu); | |
| return -1; | |
| } | |
| pool->transient = true; | |
| spin_lock_irqsave(&dev->dma_io_tlb_lock, flags); | |
| list_add_rcu(&pool->node, &dev->dma_io_tlb_pools); | |
| spin_unlock_irqrestore(&dev->dma_io_tlb_lock, flags); | |
| inc_transient_used(mem, pool->nslabs); | |
| found: | |
| WRITE_ONCE(dev->dma_uses_io_tlb, true); | |
| /* | |
| * The general barrier orders reads and writes against a presumed store | |
| * of the SWIOTLB buffer address by a device driver (to a driver private | |
| * data structure). It serves two purposes. | |
| * | |
| * First, the store to dev->dma_uses_io_tlb must be ordered before the | |
| * presumed store. This guarantees that the returned buffer address | |
| * cannot be passed to another CPU before updating dev->dma_uses_io_tlb. | |
| * | |
| * Second, the load from mem->pools must be ordered before the same | |
| * presumed store. This guarantees that the returned buffer address | |
| * cannot be observed by another CPU before an update of the RCU list | |
| * that was made by swiotlb_dyn_alloc() on a third CPU (cf. multicopy | |
| * atomicity). | |
| * | |
| * See also the comment in swiotlb_find_pool(). | |
| */ | |
| smp_mb(); | |
| *retpool = pool; | |
| return index; | |
| } | |
| #else /* !CONFIG_SWIOTLB_DYNAMIC */ | |
| static int swiotlb_find_slots(struct device *dev, phys_addr_t orig_addr, | |
| size_t alloc_size, unsigned int alloc_align_mask, | |
| struct io_tlb_pool **retpool) | |
| { | |
| struct io_tlb_pool *pool; | |
| int start, i; | |
| int index; | |
| *retpool = pool = &dev->dma_io_tlb_mem->defpool; | |
| i = start = raw_smp_processor_id() & (pool->nareas - 1); | |
| do { | |
| index = swiotlb_search_pool_area(dev, pool, i, orig_addr, | |
| alloc_size, alloc_align_mask); | |
| if (index >= 0) | |
| return index; | |
| if (++i >= pool->nareas) | |
| i = 0; | |
| } while (i != start); | |
| return -1; | |
| } | |
| #endif /* CONFIG_SWIOTLB_DYNAMIC */ | |
| #ifdef CONFIG_DEBUG_FS | |
| /** | |
| * mem_used() - get number of used slots in an allocator | |
| * @mem: Software IO TLB allocator. | |
| * | |
| * The result is accurate in this version of the function, because an atomic | |
| * counter is available if CONFIG_DEBUG_FS is set. | |
| * | |
| * Return: Number of used slots. | |
| */ | |
| static unsigned long mem_used(struct io_tlb_mem *mem) | |
| { | |
| return atomic_long_read(&mem->total_used); | |
| } | |
| #else /* !CONFIG_DEBUG_FS */ | |
| /** | |
| * mem_pool_used() - get number of used slots in a memory pool | |
| * @pool: Software IO TLB memory pool. | |
| * | |
| * The result is not accurate, see mem_used(). | |
| * | |
| * Return: Approximate number of used slots. | |
| */ | |
| static unsigned long mem_pool_used(struct io_tlb_pool *pool) | |
| { | |
| int i; | |
| unsigned long used = 0; | |
| for (i = 0; i < pool->nareas; i++) | |
| used += pool->areas[i].used; | |
| return used; | |
| } | |
| /** | |
| * mem_used() - get number of used slots in an allocator | |
| * @mem: Software IO TLB allocator. | |
| * | |
| * The result is not accurate, because there is no locking of individual | |
| * areas. | |
| * | |
| * Return: Approximate number of used slots. | |
| */ | |
| static unsigned long mem_used(struct io_tlb_mem *mem) | |
| { | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| struct io_tlb_pool *pool; | |
| unsigned long used = 0; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(pool, &mem->pools, node) | |
| used += mem_pool_used(pool); | |
| rcu_read_unlock(); | |
| return used; | |
| #else | |
| return mem_pool_used(&mem->defpool); | |
| #endif | |
| } | |
| #endif /* CONFIG_DEBUG_FS */ | |
| /** | |
| * swiotlb_tbl_map_single() - bounce buffer map a single contiguous physical area | |
| * @dev: Device which maps the buffer. | |
| * @orig_addr: Original (non-bounced) physical IO buffer address | |
| * @mapping_size: Requested size of the actual bounce buffer, excluding | |
| * any pre- or post-padding for alignment | |
| * @alloc_align_mask: Required start and end alignment of the allocated buffer | |
| * @dir: DMA direction | |
| * @attrs: Optional DMA attributes for the map operation | |
| * | |
| * Find and allocate a suitable sequence of IO TLB slots for the request. | |
| * The allocated space starts at an alignment specified by alloc_align_mask, | |
| * and the size of the allocated space is rounded up so that the total amount | |
| * of allocated space is a multiple of (alloc_align_mask + 1). If | |
| * alloc_align_mask is zero, the allocated space may be at any alignment and | |
| * the size is not rounded up. | |
| * | |
| * The returned address is within the allocated space and matches the bits | |
| * of orig_addr that are specified in the DMA min_align_mask for the device. As | |
| * such, this returned address may be offset from the beginning of the allocated | |
| * space. The bounce buffer space starting at the returned address for | |
| * mapping_size bytes is initialized to the contents of the original IO buffer | |
| * area. Any pre-padding (due to an offset) and any post-padding (due to | |
| * rounding-up the size) is not initialized. | |
| */ | |
| phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, | |
| size_t mapping_size, unsigned int alloc_align_mask, | |
| enum dma_data_direction dir, unsigned long attrs) | |
| { | |
| struct io_tlb_mem *mem = dev->dma_io_tlb_mem; | |
| unsigned int offset; | |
| struct io_tlb_pool *pool; | |
| unsigned int i; | |
| size_t size; | |
| int index; | |
| phys_addr_t tlb_addr; | |
| unsigned short pad_slots; | |
| if (!mem || !mem->nslabs) { | |
| dev_warn_ratelimited(dev, | |
| "Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer"); | |
| return (phys_addr_t)DMA_MAPPING_ERROR; | |
| } | |
| if (cc_platform_has(CC_ATTR_MEM_ENCRYPT)) | |
| pr_warn_once("Memory encryption is active and system is using DMA bounce buffers\n"); | |
| /* | |
| * The default swiotlb memory pool is allocated with PAGE_SIZE | |
| * alignment. If a mapping is requested with larger alignment, | |
| * the mapping may be unable to use the initial slot(s) in all | |
| * sets of IO_TLB_SEGSIZE slots. In such case, a mapping request | |
| * of or near the maximum mapping size would always fail. | |
| */ | |
| dev_WARN_ONCE(dev, alloc_align_mask > ~PAGE_MASK, | |
| "Alloc alignment may prevent fulfilling requests with max mapping_size\n"); | |
| offset = swiotlb_align_offset(dev, alloc_align_mask, orig_addr); | |
| size = ALIGN(mapping_size + offset, alloc_align_mask + 1); | |
| index = swiotlb_find_slots(dev, orig_addr, size, alloc_align_mask, &pool); | |
| if (index == -1) { | |
| if (!(attrs & DMA_ATTR_NO_WARN)) | |
| dev_warn_ratelimited(dev, | |
| "swiotlb buffer is full (sz: %zd bytes), total %lu (slots), used %lu (slots)\n", | |
| size, mem->nslabs, mem_used(mem)); | |
| return (phys_addr_t)DMA_MAPPING_ERROR; | |
| } | |
| /* | |
| * If dma_skip_sync was set, reset it on first SWIOTLB buffer | |
| * mapping to always sync SWIOTLB buffers. | |
| */ | |
| dma_reset_need_sync(dev); | |
| /* | |
| * Save away the mapping from the original address to the DMA address. | |
| * This is needed when we sync the memory. Then we sync the buffer if | |
| * needed. | |
| */ | |
| pad_slots = offset >> IO_TLB_SHIFT; | |
| offset &= (IO_TLB_SIZE - 1); | |
| index += pad_slots; | |
| pool->slots[index].pad_slots = pad_slots; | |
| for (i = 0; i < (nr_slots(size) - pad_slots); i++) | |
| pool->slots[index + i].orig_addr = slot_addr(orig_addr, i); | |
| tlb_addr = slot_addr(pool->start, index) + offset; | |
| /* | |
| * When the device is writing memory, i.e. dir == DMA_FROM_DEVICE, copy | |
| * the original buffer to the TLB buffer before initiating DMA in order | |
| * to preserve the original's data if the device does a partial write, | |
| * i.e. if the device doesn't overwrite the entire buffer. Preserving | |
| * the original data, even if it's garbage, is necessary to match | |
| * hardware behavior. Use of swiotlb is supposed to be transparent, | |
| * i.e. swiotlb must not corrupt memory by clobbering unwritten bytes. | |
| */ | |
| swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE, pool); | |
| return tlb_addr; | |
| } | |
| static void swiotlb_release_slots(struct device *dev, phys_addr_t tlb_addr, | |
| struct io_tlb_pool *mem) | |
| { | |
| unsigned long flags; | |
| unsigned int offset = swiotlb_align_offset(dev, 0, tlb_addr); | |
| int index, nslots, aindex; | |
| struct io_tlb_area *area; | |
| int count, i; | |
| index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT; | |
| index -= mem->slots[index].pad_slots; | |
| nslots = nr_slots(mem->slots[index].alloc_size + offset); | |
| aindex = index / mem->area_nslabs; | |
| area = &mem->areas[aindex]; | |
| /* | |
| * Return the buffer to the free list by setting the corresponding | |
| * entries to indicate the number of contiguous entries available. | |
| * While returning the entries to the free list, we merge the entries | |
| * with slots below and above the pool being returned. | |
| */ | |
| BUG_ON(aindex >= mem->nareas); | |
| spin_lock_irqsave(&area->lock, flags); | |
| if (index + nslots < ALIGN(index + 1, IO_TLB_SEGSIZE)) | |
| count = mem->slots[index + nslots].list; | |
| else | |
| count = 0; | |
| /* | |
| * Step 1: return the slots to the free list, merging the slots with | |
| * superceeding slots | |
| */ | |
| for (i = index + nslots - 1; i >= index; i--) { | |
| mem->slots[i].list = ++count; | |
| mem->slots[i].orig_addr = INVALID_PHYS_ADDR; | |
| mem->slots[i].alloc_size = 0; | |
| mem->slots[i].pad_slots = 0; | |
| } | |
| /* | |
| * Step 2: merge the returned slots with the preceding slots, if | |
| * available (non zero) | |
| */ | |
| for (i = index - 1; | |
| io_tlb_offset(i) != IO_TLB_SEGSIZE - 1 && mem->slots[i].list; | |
| i--) | |
| mem->slots[i].list = ++count; | |
| area->used -= nslots; | |
| spin_unlock_irqrestore(&area->lock, flags); | |
| dec_used(dev->dma_io_tlb_mem, nslots); | |
| } | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| /** | |
| * swiotlb_del_transient() - delete a transient memory pool | |
| * @dev: Device which mapped the buffer. | |
| * @tlb_addr: Physical address within a bounce buffer. | |
| * @pool: Pointer to the transient memory pool to be checked and deleted. | |
| * | |
| * Check whether the address belongs to a transient SWIOTLB memory pool. | |
| * If yes, then delete the pool. | |
| * | |
| * Return: %true if @tlb_addr belonged to a transient pool that was released. | |
| */ | |
| static bool swiotlb_del_transient(struct device *dev, phys_addr_t tlb_addr, | |
| struct io_tlb_pool *pool) | |
| { | |
| if (!pool->transient) | |
| return false; | |
| dec_used(dev->dma_io_tlb_mem, pool->nslabs); | |
| swiotlb_del_pool(dev, pool); | |
| dec_transient_used(dev->dma_io_tlb_mem, pool->nslabs); | |
| return true; | |
| } | |
| #else /* !CONFIG_SWIOTLB_DYNAMIC */ | |
| static inline bool swiotlb_del_transient(struct device *dev, | |
| phys_addr_t tlb_addr, struct io_tlb_pool *pool) | |
| { | |
| return false; | |
| } | |
| #endif /* CONFIG_SWIOTLB_DYNAMIC */ | |
| /* | |
| * tlb_addr is the physical address of the bounce buffer to unmap. | |
| */ | |
| void __swiotlb_tbl_unmap_single(struct device *dev, phys_addr_t tlb_addr, | |
| size_t mapping_size, enum dma_data_direction dir, | |
| unsigned long attrs, struct io_tlb_pool *pool) | |
| { | |
| /* | |
| * First, sync the memory before unmapping the entry | |
| */ | |
| if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && | |
| (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)) | |
| swiotlb_bounce(dev, tlb_addr, mapping_size, | |
| DMA_FROM_DEVICE, pool); | |
| if (swiotlb_del_transient(dev, tlb_addr, pool)) | |
| return; | |
| swiotlb_release_slots(dev, tlb_addr, pool); | |
| } | |
| void __swiotlb_sync_single_for_device(struct device *dev, phys_addr_t tlb_addr, | |
| size_t size, enum dma_data_direction dir, | |
| struct io_tlb_pool *pool) | |
| { | |
| if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) | |
| swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE, pool); | |
| else | |
| BUG_ON(dir != DMA_FROM_DEVICE); | |
| } | |
| void __swiotlb_sync_single_for_cpu(struct device *dev, phys_addr_t tlb_addr, | |
| size_t size, enum dma_data_direction dir, | |
| struct io_tlb_pool *pool) | |
| { | |
| if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) | |
| swiotlb_bounce(dev, tlb_addr, size, DMA_FROM_DEVICE, pool); | |
| else | |
| BUG_ON(dir != DMA_TO_DEVICE); | |
| } | |
| /* | |
| * Create a swiotlb mapping for the buffer at @paddr, and in case of DMAing | |
| * to the device copy the data into it as well. | |
| */ | |
| dma_addr_t swiotlb_map(struct device *dev, phys_addr_t paddr, size_t size, | |
| enum dma_data_direction dir, unsigned long attrs) | |
| { | |
| phys_addr_t swiotlb_addr; | |
| dma_addr_t dma_addr; | |
| trace_swiotlb_bounced(dev, phys_to_dma(dev, paddr), size); | |
| swiotlb_addr = swiotlb_tbl_map_single(dev, paddr, size, 0, dir, attrs); | |
| if (swiotlb_addr == (phys_addr_t)DMA_MAPPING_ERROR) | |
| return DMA_MAPPING_ERROR; | |
| /* Ensure that the address returned is DMA'ble */ | |
| dma_addr = phys_to_dma_unencrypted(dev, swiotlb_addr); | |
| if (unlikely(!dma_capable(dev, dma_addr, size, true))) { | |
| __swiotlb_tbl_unmap_single(dev, swiotlb_addr, size, dir, | |
| attrs | DMA_ATTR_SKIP_CPU_SYNC, | |
| swiotlb_find_pool(dev, swiotlb_addr)); | |
| dev_WARN_ONCE(dev, 1, | |
| "swiotlb addr %pad+%zu overflow (mask %llx, bus limit %llx).\n", | |
| &dma_addr, size, *dev->dma_mask, dev->bus_dma_limit); | |
| return DMA_MAPPING_ERROR; | |
| } | |
| if (!dev_is_dma_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) | |
| arch_sync_dma_for_device(swiotlb_addr, size, dir); | |
| return dma_addr; | |
| } | |
| size_t swiotlb_max_mapping_size(struct device *dev) | |
| { | |
| int min_align_mask = dma_get_min_align_mask(dev); | |
| int min_align = 0; | |
| /* | |
| * swiotlb_find_slots() skips slots according to | |
| * min align mask. This affects max mapping size. | |
| * Take it into acount here. | |
| */ | |
| if (min_align_mask) | |
| min_align = roundup(min_align_mask, IO_TLB_SIZE); | |
| return ((size_t)IO_TLB_SIZE) * IO_TLB_SEGSIZE - min_align; | |
| } | |
| /** | |
| * is_swiotlb_allocated() - check if the default software IO TLB is initialized | |
| */ | |
| bool is_swiotlb_allocated(void) | |
| { | |
| return io_tlb_default_mem.nslabs; | |
| } | |
| bool is_swiotlb_active(struct device *dev) | |
| { | |
| struct io_tlb_mem *mem = dev->dma_io_tlb_mem; | |
| return mem && mem->nslabs; | |
| } | |
| /** | |
| * default_swiotlb_base() - get the base address of the default SWIOTLB | |
| * | |
| * Get the lowest physical address used by the default software IO TLB pool. | |
| */ | |
| phys_addr_t default_swiotlb_base(void) | |
| { | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| io_tlb_default_mem.can_grow = false; | |
| #endif | |
| return io_tlb_default_mem.defpool.start; | |
| } | |
| /** | |
| * default_swiotlb_limit() - get the address limit of the default SWIOTLB | |
| * | |
| * Get the highest physical address used by the default software IO TLB pool. | |
| */ | |
| phys_addr_t default_swiotlb_limit(void) | |
| { | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| return io_tlb_default_mem.phys_limit; | |
| #else | |
| return io_tlb_default_mem.defpool.end - 1; | |
| #endif | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| static unsigned long mem_transient_used(struct io_tlb_mem *mem) | |
| { | |
| return atomic_long_read(&mem->transient_nslabs); | |
| } | |
| static int io_tlb_transient_used_get(void *data, u64 *val) | |
| { | |
| struct io_tlb_mem *mem = data; | |
| *val = mem_transient_used(mem); | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_transient_used, io_tlb_transient_used_get, | |
| NULL, "%llu\n"); | |
| #endif /* CONFIG_SWIOTLB_DYNAMIC */ | |
| static int io_tlb_used_get(void *data, u64 *val) | |
| { | |
| struct io_tlb_mem *mem = data; | |
| *val = mem_used(mem); | |
| return 0; | |
| } | |
| static int io_tlb_hiwater_get(void *data, u64 *val) | |
| { | |
| struct io_tlb_mem *mem = data; | |
| *val = atomic_long_read(&mem->used_hiwater); | |
| return 0; | |
| } | |
| static int io_tlb_hiwater_set(void *data, u64 val) | |
| { | |
| struct io_tlb_mem *mem = data; | |
| /* Only allow setting to zero */ | |
| if (val != 0) | |
| return -EINVAL; | |
| atomic_long_set(&mem->used_hiwater, val); | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_used, io_tlb_used_get, NULL, "%llu\n"); | |
| DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_hiwater, io_tlb_hiwater_get, | |
| io_tlb_hiwater_set, "%llu\n"); | |
| static void swiotlb_create_debugfs_files(struct io_tlb_mem *mem, | |
| const char *dirname) | |
| { | |
| mem->debugfs = debugfs_create_dir(dirname, io_tlb_default_mem.debugfs); | |
| if (!mem->nslabs) | |
| return; | |
| debugfs_create_ulong("io_tlb_nslabs", 0400, mem->debugfs, &mem->nslabs); | |
| debugfs_create_file("io_tlb_used", 0400, mem->debugfs, mem, | |
| &fops_io_tlb_used); | |
| debugfs_create_file("io_tlb_used_hiwater", 0600, mem->debugfs, mem, | |
| &fops_io_tlb_hiwater); | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| debugfs_create_file("io_tlb_transient_nslabs", 0400, mem->debugfs, | |
| mem, &fops_io_tlb_transient_used); | |
| #endif | |
| } | |
| static int __init swiotlb_create_default_debugfs(void) | |
| { | |
| swiotlb_create_debugfs_files(&io_tlb_default_mem, "swiotlb"); | |
| return 0; | |
| } | |
| late_initcall(swiotlb_create_default_debugfs); | |
| #else /* !CONFIG_DEBUG_FS */ | |
| static inline void swiotlb_create_debugfs_files(struct io_tlb_mem *mem, | |
| const char *dirname) | |
| { | |
| } | |
| #endif /* CONFIG_DEBUG_FS */ | |
| #ifdef CONFIG_DMA_RESTRICTED_POOL | |
| struct page *swiotlb_alloc(struct device *dev, size_t size) | |
| { | |
| struct io_tlb_mem *mem = dev->dma_io_tlb_mem; | |
| struct io_tlb_pool *pool; | |
| phys_addr_t tlb_addr; | |
| unsigned int align; | |
| int index; | |
| if (!mem) | |
| return NULL; | |
| align = (1 << (get_order(size) + PAGE_SHIFT)) - 1; | |
| index = swiotlb_find_slots(dev, 0, size, align, &pool); | |
| if (index == -1) | |
| return NULL; | |
| tlb_addr = slot_addr(pool->start, index); | |
| if (unlikely(!PAGE_ALIGNED(tlb_addr))) { | |
| dev_WARN_ONCE(dev, 1, "Cannot allocate pages from non page-aligned swiotlb addr 0x%pa.\n", | |
| &tlb_addr); | |
| swiotlb_release_slots(dev, tlb_addr, pool); | |
| return NULL; | |
| } | |
| return pfn_to_page(PFN_DOWN(tlb_addr)); | |
| } | |
| bool swiotlb_free(struct device *dev, struct page *page, size_t size) | |
| { | |
| phys_addr_t tlb_addr = page_to_phys(page); | |
| struct io_tlb_pool *pool; | |
| pool = swiotlb_find_pool(dev, tlb_addr); | |
| if (!pool) | |
| return false; | |
| swiotlb_release_slots(dev, tlb_addr, pool); | |
| return true; | |
| } | |
| static int rmem_swiotlb_device_init(struct reserved_mem *rmem, | |
| struct device *dev) | |
| { | |
| struct io_tlb_mem *mem = rmem->priv; | |
| unsigned long nslabs = rmem->size >> IO_TLB_SHIFT; | |
| /* Set Per-device io tlb area to one */ | |
| unsigned int nareas = 1; | |
| if (PageHighMem(pfn_to_page(PHYS_PFN(rmem->base)))) { | |
| dev_err(dev, "Restricted DMA pool must be accessible within the linear mapping."); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Since multiple devices can share the same pool, the private data, | |
| * io_tlb_mem struct, will be initialized by the first device attached | |
| * to it. | |
| */ | |
| if (!mem) { | |
| struct io_tlb_pool *pool; | |
| mem = kzalloc(sizeof(*mem), GFP_KERNEL); | |
| if (!mem) | |
| return -ENOMEM; | |
| pool = &mem->defpool; | |
| pool->slots = kcalloc(nslabs, sizeof(*pool->slots), GFP_KERNEL); | |
| if (!pool->slots) { | |
| kfree(mem); | |
| return -ENOMEM; | |
| } | |
| pool->areas = kcalloc(nareas, sizeof(*pool->areas), | |
| GFP_KERNEL); | |
| if (!pool->areas) { | |
| kfree(pool->slots); | |
| kfree(mem); | |
| return -ENOMEM; | |
| } | |
| set_memory_decrypted((unsigned long)phys_to_virt(rmem->base), | |
| rmem->size >> PAGE_SHIFT); | |
| swiotlb_init_io_tlb_pool(pool, rmem->base, nslabs, | |
| false, nareas); | |
| mem->force_bounce = true; | |
| mem->for_alloc = true; | |
| #ifdef CONFIG_SWIOTLB_DYNAMIC | |
| spin_lock_init(&mem->lock); | |
| INIT_LIST_HEAD_RCU(&mem->pools); | |
| #endif | |
| add_mem_pool(mem, pool); | |
| rmem->priv = mem; | |
| swiotlb_create_debugfs_files(mem, rmem->name); | |
| } | |
| dev->dma_io_tlb_mem = mem; | |
| return 0; | |
| } | |
| static void rmem_swiotlb_device_release(struct reserved_mem *rmem, | |
| struct device *dev) | |
| { | |
| dev->dma_io_tlb_mem = &io_tlb_default_mem; | |
| } | |
| static const struct reserved_mem_ops rmem_swiotlb_ops = { | |
| .device_init = rmem_swiotlb_device_init, | |
| .device_release = rmem_swiotlb_device_release, | |
| }; | |
| static int __init rmem_swiotlb_setup(struct reserved_mem *rmem) | |
| { | |
| unsigned long node = rmem->fdt_node; | |
| if (of_get_flat_dt_prop(node, "reusable", NULL) || | |
| of_get_flat_dt_prop(node, "linux,cma-default", NULL) || | |
| of_get_flat_dt_prop(node, "linux,dma-default", NULL) || | |
| of_get_flat_dt_prop(node, "no-map", NULL)) | |
| return -EINVAL; | |
| rmem->ops = &rmem_swiotlb_ops; | |
| pr_info("Reserved memory: created restricted DMA pool at %pa, size %ld MiB\n", | |
| &rmem->base, (unsigned long)rmem->size / SZ_1M); | |
| return 0; | |
| } | |
| RESERVEDMEM_OF_DECLARE(dma, "restricted-dma-pool", rmem_swiotlb_setup); | |
| #endif /* CONFIG_DMA_RESTRICTED_POOL */ |