| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Fast Userspace Mutexes (which I call "Futexes!"). | |
| * (C) Rusty Russell, IBM 2002 | |
| * | |
| * Generalized futexes, futex requeueing, misc fixes by Ingo Molnar | |
| * (C) Copyright 2003 Red Hat Inc, All Rights Reserved | |
| * | |
| * Removed page pinning, fix privately mapped COW pages and other cleanups | |
| * (C) Copyright 2003, 2004 Jamie Lokier | |
| * | |
| * Robust futex support started by Ingo Molnar | |
| * (C) Copyright 2006 Red Hat Inc, All Rights Reserved | |
| * Thanks to Thomas Gleixner for suggestions, analysis and fixes. | |
| * | |
| * PI-futex support started by Ingo Molnar and Thomas Gleixner | |
| * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> | |
| * Copyright (C) 2006 Timesys Corp., Thomas Gleixner <tglx@timesys.com> | |
| * | |
| * PRIVATE futexes by Eric Dumazet | |
| * Copyright (C) 2007 Eric Dumazet <dada1@cosmosbay.com> | |
| * | |
| * Requeue-PI support by Darren Hart <dvhltc@us.ibm.com> | |
| * Copyright (C) IBM Corporation, 2009 | |
| * Thanks to Thomas Gleixner for conceptual design and careful reviews. | |
| * | |
| * Thanks to Ben LaHaise for yelling "hashed waitqueues" loudly | |
| * enough at me, Linus for the original (flawed) idea, Matthew | |
| * Kirkwood for proof-of-concept implementation. | |
| * | |
| * "The futexes are also cursed." | |
| * "But they come in a choice of three flavours!" | |
| */ | |
| #include <linux/compat.h> | |
| #include <linux/jhash.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/plist.h> | |
| #include <linux/memblock.h> | |
| #include <linux/fault-inject.h> | |
| #include <linux/slab.h> | |
| #include "futex.h" | |
| #include "../locking/rtmutex_common.h" | |
| /* | |
| * The base of the bucket array and its size are always used together | |
| * (after initialization only in futex_hash()), so ensure that they | |
| * reside in the same cacheline. | |
| */ | |
| static struct { | |
| struct futex_hash_bucket *queues; | |
| unsigned long hashmask; | |
| } __futex_data __read_mostly __aligned(2*sizeof(long)); | |
| #define futex_queues (__futex_data.queues) | |
| #define futex_hashmask (__futex_data.hashmask) | |
| /* | |
| * Fault injections for futexes. | |
| */ | |
| #ifdef CONFIG_FAIL_FUTEX | |
| static struct { | |
| struct fault_attr attr; | |
| bool ignore_private; | |
| } fail_futex = { | |
| .attr = FAULT_ATTR_INITIALIZER, | |
| .ignore_private = false, | |
| }; | |
| static int __init setup_fail_futex(char *str) | |
| { | |
| return setup_fault_attr(&fail_futex.attr, str); | |
| } | |
| __setup("fail_futex=", setup_fail_futex); | |
| bool should_fail_futex(bool fshared) | |
| { | |
| if (fail_futex.ignore_private && !fshared) | |
| return false; | |
| return should_fail(&fail_futex.attr, 1); | |
| } | |
| #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS | |
| static int __init fail_futex_debugfs(void) | |
| { | |
| umode_t mode = S_IFREG | S_IRUSR | S_IWUSR; | |
| struct dentry *dir; | |
| dir = fault_create_debugfs_attr("fail_futex", NULL, | |
| &fail_futex.attr); | |
| if (IS_ERR(dir)) | |
| return PTR_ERR(dir); | |
| debugfs_create_bool("ignore-private", mode, dir, | |
| &fail_futex.ignore_private); | |
| return 0; | |
| } | |
| late_initcall(fail_futex_debugfs); | |
| #endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */ | |
| #endif /* CONFIG_FAIL_FUTEX */ | |
| /** | |
| * futex_hash - Return the hash bucket in the global hash | |
| * @key: Pointer to the futex key for which the hash is calculated | |
| * | |
| * We hash on the keys returned from get_futex_key (see below) and return the | |
| * corresponding hash bucket in the global hash. | |
| */ | |
| struct futex_hash_bucket *futex_hash(union futex_key *key) | |
| { | |
| u32 hash = jhash2((u32 *)key, offsetof(typeof(*key), both.offset) / 4, | |
| key->both.offset); | |
| return &futex_queues[hash & futex_hashmask]; | |
| } | |
| /** | |
| * futex_setup_timer - set up the sleeping hrtimer. | |
| * @time: ptr to the given timeout value | |
| * @timeout: the hrtimer_sleeper structure to be set up | |
| * @flags: futex flags | |
| * @range_ns: optional range in ns | |
| * | |
| * Return: Initialized hrtimer_sleeper structure or NULL if no timeout | |
| * value given | |
| */ | |
| struct hrtimer_sleeper * | |
| futex_setup_timer(ktime_t *time, struct hrtimer_sleeper *timeout, | |
| int flags, u64 range_ns) | |
| { | |
| if (!time) | |
| return NULL; | |
| hrtimer_setup_sleeper_on_stack(timeout, | |
| (flags & FLAGS_CLOCKRT) ? CLOCK_REALTIME : CLOCK_MONOTONIC, | |
| HRTIMER_MODE_ABS); | |
| /* | |
| * If range_ns is 0, calling hrtimer_set_expires_range_ns() is | |
| * effectively the same as calling hrtimer_set_expires(). | |
| */ | |
| hrtimer_set_expires_range_ns(&timeout->timer, *time, range_ns); | |
| return timeout; | |
| } | |
| /* | |
| * Generate a machine wide unique identifier for this inode. | |
| * | |
| * This relies on u64 not wrapping in the life-time of the machine; which with | |
| * 1ns resolution means almost 585 years. | |
| * | |
| * This further relies on the fact that a well formed program will not unmap | |
| * the file while it has a (shared) futex waiting on it. This mapping will have | |
| * a file reference which pins the mount and inode. | |
| * | |
| * If for some reason an inode gets evicted and read back in again, it will get | |
| * a new sequence number and will _NOT_ match, even though it is the exact same | |
| * file. | |
| * | |
| * It is important that futex_match() will never have a false-positive, esp. | |
| * for PI futexes that can mess up the state. The above argues that false-negatives | |
| * are only possible for malformed programs. | |
| */ | |
| static u64 get_inode_sequence_number(struct inode *inode) | |
| { | |
| static atomic64_t i_seq; | |
| u64 old; | |
| /* Does the inode already have a sequence number? */ | |
| old = atomic64_read(&inode->i_sequence); | |
| if (likely(old)) | |
| return old; | |
| for (;;) { | |
| u64 new = atomic64_inc_return(&i_seq); | |
| if (WARN_ON_ONCE(!new)) | |
| continue; | |
| old = 0; | |
| if (!atomic64_try_cmpxchg_relaxed(&inode->i_sequence, &old, new)) | |
| return old; | |
| return new; | |
| } | |
| } | |
| /** | |
| * get_futex_key() - Get parameters which are the keys for a futex | |
| * @uaddr: virtual address of the futex | |
| * @flags: FLAGS_* | |
| * @key: address where result is stored. | |
| * @rw: mapping needs to be read/write (values: FUTEX_READ, | |
| * FUTEX_WRITE) | |
| * | |
| * Return: a negative error code or 0 | |
| * | |
| * The key words are stored in @key on success. | |
| * | |
| * For shared mappings (when @fshared), the key is: | |
| * | |
| * ( inode->i_sequence, page->index, offset_within_page ) | |
| * | |
| * [ also see get_inode_sequence_number() ] | |
| * | |
| * For private mappings (or when !@fshared), the key is: | |
| * | |
| * ( current->mm, address, 0 ) | |
| * | |
| * This allows (cross process, where applicable) identification of the futex | |
| * without keeping the page pinned for the duration of the FUTEX_WAIT. | |
| * | |
| * lock_page() might sleep, the caller should not hold a spinlock. | |
| */ | |
| int get_futex_key(u32 __user *uaddr, unsigned int flags, union futex_key *key, | |
| enum futex_access rw) | |
| { | |
| unsigned long address = (unsigned long)uaddr; | |
| struct mm_struct *mm = current->mm; | |
| struct page *page; | |
| struct folio *folio; | |
| struct address_space *mapping; | |
| int err, ro = 0; | |
| bool fshared; | |
| fshared = flags & FLAGS_SHARED; | |
| /* | |
| * The futex address must be "naturally" aligned. | |
| */ | |
| key->both.offset = address % PAGE_SIZE; | |
| if (unlikely((address % sizeof(u32)) != 0)) | |
| return -EINVAL; | |
| address -= key->both.offset; | |
| if (unlikely(!access_ok(uaddr, sizeof(u32)))) | |
| return -EFAULT; | |
| if (unlikely(should_fail_futex(fshared))) | |
| return -EFAULT; | |
| /* | |
| * PROCESS_PRIVATE futexes are fast. | |
| * As the mm cannot disappear under us and the 'key' only needs | |
| * virtual address, we dont even have to find the underlying vma. | |
| * Note : We do have to check 'uaddr' is a valid user address, | |
| * but access_ok() should be faster than find_vma() | |
| */ | |
| if (!fshared) { | |
| /* | |
| * On no-MMU, shared futexes are treated as private, therefore | |
| * we must not include the current process in the key. Since | |
| * there is only one address space, the address is a unique key | |
| * on its own. | |
| */ | |
| if (IS_ENABLED(CONFIG_MMU)) | |
| key->private.mm = mm; | |
| else | |
| key->private.mm = NULL; | |
| key->private.address = address; | |
| return 0; | |
| } | |
| again: | |
| /* Ignore any VERIFY_READ mapping (futex common case) */ | |
| if (unlikely(should_fail_futex(true))) | |
| return -EFAULT; | |
| err = get_user_pages_fast(address, 1, FOLL_WRITE, &page); | |
| /* | |
| * If write access is not required (eg. FUTEX_WAIT), try | |
| * and get read-only access. | |
| */ | |
| if (err == -EFAULT && rw == FUTEX_READ) { | |
| err = get_user_pages_fast(address, 1, 0, &page); | |
| ro = 1; | |
| } | |
| if (err < 0) | |
| return err; | |
| else | |
| err = 0; | |
| /* | |
| * The treatment of mapping from this point on is critical. The folio | |
| * lock protects many things but in this context the folio lock | |
| * stabilizes mapping, prevents inode freeing in the shared | |
| * file-backed region case and guards against movement to swap cache. | |
| * | |
| * Strictly speaking the folio lock is not needed in all cases being | |
| * considered here and folio lock forces unnecessarily serialization. | |
| * From this point on, mapping will be re-verified if necessary and | |
| * folio lock will be acquired only if it is unavoidable | |
| * | |
| * Mapping checks require the folio so it is looked up now. For | |
| * anonymous pages, it does not matter if the folio is split | |
| * in the future as the key is based on the address. For | |
| * filesystem-backed pages, the precise page is required as the | |
| * index of the page determines the key. | |
| */ | |
| folio = page_folio(page); | |
| mapping = READ_ONCE(folio->mapping); | |
| /* | |
| * If folio->mapping is NULL, then it cannot be an anonymous | |
| * page; but it might be the ZERO_PAGE or in the gate area or | |
| * in a special mapping (all cases which we are happy to fail); | |
| * or it may have been a good file page when get_user_pages_fast | |
| * found it, but truncated or holepunched or subjected to | |
| * invalidate_complete_page2 before we got the folio lock (also | |
| * cases which we are happy to fail). And we hold a reference, | |
| * so refcount care in invalidate_inode_page's remove_mapping | |
| * prevents drop_caches from setting mapping to NULL beneath us. | |
| * | |
| * The case we do have to guard against is when memory pressure made | |
| * shmem_writepage move it from filecache to swapcache beneath us: | |
| * an unlikely race, but we do need to retry for folio->mapping. | |
| */ | |
| if (unlikely(!mapping)) { | |
| int shmem_swizzled; | |
| /* | |
| * Folio lock is required to identify which special case above | |
| * applies. If this is really a shmem page then the folio lock | |
| * will prevent unexpected transitions. | |
| */ | |
| folio_lock(folio); | |
| shmem_swizzled = folio_test_swapcache(folio) || folio->mapping; | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| if (shmem_swizzled) | |
| goto again; | |
| return -EFAULT; | |
| } | |
| /* | |
| * Private mappings are handled in a simple way. | |
| * | |
| * If the futex key is stored in anonymous memory, then the associated | |
| * object is the mm which is implicitly pinned by the calling process. | |
| * | |
| * NOTE: When userspace waits on a MAP_SHARED mapping, even if | |
| * it's a read-only handle, it's expected that futexes attach to | |
| * the object not the particular process. | |
| */ | |
| if (folio_test_anon(folio)) { | |
| /* | |
| * A RO anonymous page will never change and thus doesn't make | |
| * sense for futex operations. | |
| */ | |
| if (unlikely(should_fail_futex(true)) || ro) { | |
| err = -EFAULT; | |
| goto out; | |
| } | |
| key->both.offset |= FUT_OFF_MMSHARED; /* ref taken on mm */ | |
| key->private.mm = mm; | |
| key->private.address = address; | |
| } else { | |
| struct inode *inode; | |
| /* | |
| * The associated futex object in this case is the inode and | |
| * the folio->mapping must be traversed. Ordinarily this should | |
| * be stabilised under folio lock but it's not strictly | |
| * necessary in this case as we just want to pin the inode, not | |
| * update i_pages or anything like that. | |
| * | |
| * The RCU read lock is taken as the inode is finally freed | |
| * under RCU. If the mapping still matches expectations then the | |
| * mapping->host can be safely accessed as being a valid inode. | |
| */ | |
| rcu_read_lock(); | |
| if (READ_ONCE(folio->mapping) != mapping) { | |
| rcu_read_unlock(); | |
| folio_put(folio); | |
| goto again; | |
| } | |
| inode = READ_ONCE(mapping->host); | |
| if (!inode) { | |
| rcu_read_unlock(); | |
| folio_put(folio); | |
| goto again; | |
| } | |
| key->both.offset |= FUT_OFF_INODE; /* inode-based key */ | |
| key->shared.i_seq = get_inode_sequence_number(inode); | |
| key->shared.pgoff = page_pgoff(folio, page); | |
| rcu_read_unlock(); | |
| } | |
| out: | |
| folio_put(folio); | |
| return err; | |
| } | |
| /** | |
| * fault_in_user_writeable() - Fault in user address and verify RW access | |
| * @uaddr: pointer to faulting user space address | |
| * | |
| * Slow path to fixup the fault we just took in the atomic write | |
| * access to @uaddr. | |
| * | |
| * We have no generic implementation of a non-destructive write to the | |
| * user address. We know that we faulted in the atomic pagefault | |
| * disabled section so we can as well avoid the #PF overhead by | |
| * calling get_user_pages() right away. | |
| */ | |
| int fault_in_user_writeable(u32 __user *uaddr) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| int ret; | |
| mmap_read_lock(mm); | |
| ret = fixup_user_fault(mm, (unsigned long)uaddr, | |
| FAULT_FLAG_WRITE, NULL); | |
| mmap_read_unlock(mm); | |
| return ret < 0 ? ret : 0; | |
| } | |
| /** | |
| * futex_top_waiter() - Return the highest priority waiter on a futex | |
| * @hb: the hash bucket the futex_q's reside in | |
| * @key: the futex key (to distinguish it from other futex futex_q's) | |
| * | |
| * Must be called with the hb lock held. | |
| */ | |
| struct futex_q *futex_top_waiter(struct futex_hash_bucket *hb, union futex_key *key) | |
| { | |
| struct futex_q *this; | |
| plist_for_each_entry(this, &hb->chain, list) { | |
| if (futex_match(&this->key, key)) | |
| return this; | |
| } | |
| return NULL; | |
| } | |
| /** | |
| * wait_for_owner_exiting - Block until the owner has exited | |
| * @ret: owner's current futex lock status | |
| * @exiting: Pointer to the exiting task | |
| * | |
| * Caller must hold a refcount on @exiting. | |
| */ | |
| void wait_for_owner_exiting(int ret, struct task_struct *exiting) | |
| { | |
| if (ret != -EBUSY) { | |
| WARN_ON_ONCE(exiting); | |
| return; | |
| } | |
| if (WARN_ON_ONCE(ret == -EBUSY && !exiting)) | |
| return; | |
| mutex_lock(&exiting->futex_exit_mutex); | |
| /* | |
| * No point in doing state checking here. If the waiter got here | |
| * while the task was in exec()->exec_futex_release() then it can | |
| * have any FUTEX_STATE_* value when the waiter has acquired the | |
| * mutex. OK, if running, EXITING or DEAD if it reached exit() | |
| * already. Highly unlikely and not a problem. Just one more round | |
| * through the futex maze. | |
| */ | |
| mutex_unlock(&exiting->futex_exit_mutex); | |
| put_task_struct(exiting); | |
| } | |
| /** | |
| * __futex_unqueue() - Remove the futex_q from its futex_hash_bucket | |
| * @q: The futex_q to unqueue | |
| * | |
| * The q->lock_ptr must not be NULL and must be held by the caller. | |
| */ | |
| void __futex_unqueue(struct futex_q *q) | |
| { | |
| struct futex_hash_bucket *hb; | |
| if (WARN_ON_SMP(!q->lock_ptr) || WARN_ON(plist_node_empty(&q->list))) | |
| return; | |
| lockdep_assert_held(q->lock_ptr); | |
| hb = container_of(q->lock_ptr, struct futex_hash_bucket, lock); | |
| plist_del(&q->list, &hb->chain); | |
| futex_hb_waiters_dec(hb); | |
| } | |
| /* The key must be already stored in q->key. */ | |
| struct futex_hash_bucket *futex_q_lock(struct futex_q *q) | |
| __acquires(&hb->lock) | |
| { | |
| struct futex_hash_bucket *hb; | |
| hb = futex_hash(&q->key); | |
| /* | |
| * Increment the counter before taking the lock so that | |
| * a potential waker won't miss a to-be-slept task that is | |
| * waiting for the spinlock. This is safe as all futex_q_lock() | |
| * users end up calling futex_queue(). Similarly, for housekeeping, | |
| * decrement the counter at futex_q_unlock() when some error has | |
| * occurred and we don't end up adding the task to the list. | |
| */ | |
| futex_hb_waiters_inc(hb); /* implies smp_mb(); (A) */ | |
| q->lock_ptr = &hb->lock; | |
| spin_lock(&hb->lock); | |
| return hb; | |
| } | |
| void futex_q_unlock(struct futex_hash_bucket *hb) | |
| __releases(&hb->lock) | |
| { | |
| spin_unlock(&hb->lock); | |
| futex_hb_waiters_dec(hb); | |
| } | |
| void __futex_queue(struct futex_q *q, struct futex_hash_bucket *hb, | |
| struct task_struct *task) | |
| { | |
| int prio; | |
| /* | |
| * The priority used to register this element is | |
| * - either the real thread-priority for the real-time threads | |
| * (i.e. threads with a priority lower than MAX_RT_PRIO) | |
| * - or MAX_RT_PRIO for non-RT threads. | |
| * Thus, all RT-threads are woken first in priority order, and | |
| * the others are woken last, in FIFO order. | |
| */ | |
| prio = min(current->normal_prio, MAX_RT_PRIO); | |
| plist_node_init(&q->list, prio); | |
| plist_add(&q->list, &hb->chain); | |
| q->task = task; | |
| } | |
| /** | |
| * futex_unqueue() - Remove the futex_q from its futex_hash_bucket | |
| * @q: The futex_q to unqueue | |
| * | |
| * The q->lock_ptr must not be held by the caller. A call to futex_unqueue() must | |
| * be paired with exactly one earlier call to futex_queue(). | |
| * | |
| * Return: | |
| * - 1 - if the futex_q was still queued (and we removed unqueued it); | |
| * - 0 - if the futex_q was already removed by the waking thread | |
| */ | |
| int futex_unqueue(struct futex_q *q) | |
| { | |
| spinlock_t *lock_ptr; | |
| int ret = 0; | |
| /* In the common case we don't take the spinlock, which is nice. */ | |
| retry: | |
| /* | |
| * q->lock_ptr can change between this read and the following spin_lock. | |
| * Use READ_ONCE to forbid the compiler from reloading q->lock_ptr and | |
| * optimizing lock_ptr out of the logic below. | |
| */ | |
| lock_ptr = READ_ONCE(q->lock_ptr); | |
| if (lock_ptr != NULL) { | |
| spin_lock(lock_ptr); | |
| /* | |
| * q->lock_ptr can change between reading it and | |
| * spin_lock(), causing us to take the wrong lock. This | |
| * corrects the race condition. | |
| * | |
| * Reasoning goes like this: if we have the wrong lock, | |
| * q->lock_ptr must have changed (maybe several times) | |
| * between reading it and the spin_lock(). It can | |
| * change again after the spin_lock() but only if it was | |
| * already changed before the spin_lock(). It cannot, | |
| * however, change back to the original value. Therefore | |
| * we can detect whether we acquired the correct lock. | |
| */ | |
| if (unlikely(lock_ptr != q->lock_ptr)) { | |
| spin_unlock(lock_ptr); | |
| goto retry; | |
| } | |
| __futex_unqueue(q); | |
| BUG_ON(q->pi_state); | |
| spin_unlock(lock_ptr); | |
| ret = 1; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * PI futexes can not be requeued and must remove themselves from the hash | |
| * bucket. The hash bucket lock (i.e. lock_ptr) is held. | |
| */ | |
| void futex_unqueue_pi(struct futex_q *q) | |
| { | |
| /* | |
| * If the lock was not acquired (due to timeout or signal) then the | |
| * rt_waiter is removed before futex_q is. If this is observed by | |
| * an unlocker after dropping the rtmutex wait lock and before | |
| * acquiring the hash bucket lock, then the unlocker dequeues the | |
| * futex_q from the hash bucket list to guarantee consistent state | |
| * vs. userspace. Therefore the dequeue here must be conditional. | |
| */ | |
| if (!plist_node_empty(&q->list)) | |
| __futex_unqueue(q); | |
| BUG_ON(!q->pi_state); | |
| put_pi_state(q->pi_state); | |
| q->pi_state = NULL; | |
| } | |
| /* Constants for the pending_op argument of handle_futex_death */ | |
| #define HANDLE_DEATH_PENDING true | |
| #define HANDLE_DEATH_LIST false | |
| /* | |
| * Process a futex-list entry, check whether it's owned by the | |
| * dying task, and do notification if so: | |
| */ | |
| static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, | |
| bool pi, bool pending_op) | |
| { | |
| u32 uval, nval, mval; | |
| pid_t owner; | |
| int err; | |
| /* Futex address must be 32bit aligned */ | |
| if ((((unsigned long)uaddr) % sizeof(*uaddr)) != 0) | |
| return -1; | |
| retry: | |
| if (get_user(uval, uaddr)) | |
| return -1; | |
| /* | |
| * Special case for regular (non PI) futexes. The unlock path in | |
| * user space has two race scenarios: | |
| * | |
| * 1. The unlock path releases the user space futex value and | |
| * before it can execute the futex() syscall to wake up | |
| * waiters it is killed. | |
| * | |
| * 2. A woken up waiter is killed before it can acquire the | |
| * futex in user space. | |
| * | |
| * In the second case, the wake up notification could be generated | |
| * by the unlock path in user space after setting the futex value | |
| * to zero or by the kernel after setting the OWNER_DIED bit below. | |
| * | |
| * In both cases the TID validation below prevents a wakeup of | |
| * potential waiters which can cause these waiters to block | |
| * forever. | |
| * | |
| * In both cases the following conditions are met: | |
| * | |
| * 1) task->robust_list->list_op_pending != NULL | |
| * @pending_op == true | |
| * 2) The owner part of user space futex value == 0 | |
| * 3) Regular futex: @pi == false | |
| * | |
| * If these conditions are met, it is safe to attempt waking up a | |
| * potential waiter without touching the user space futex value and | |
| * trying to set the OWNER_DIED bit. If the futex value is zero, | |
| * the rest of the user space mutex state is consistent, so a woken | |
| * waiter will just take over the uncontended futex. Setting the | |
| * OWNER_DIED bit would create inconsistent state and malfunction | |
| * of the user space owner died handling. Otherwise, the OWNER_DIED | |
| * bit is already set, and the woken waiter is expected to deal with | |
| * this. | |
| */ | |
| owner = uval & FUTEX_TID_MASK; | |
| if (pending_op && !pi && !owner) { | |
| futex_wake(uaddr, FLAGS_SIZE_32 | FLAGS_SHARED, 1, | |
| FUTEX_BITSET_MATCH_ANY); | |
| return 0; | |
| } | |
| if (owner != task_pid_vnr(curr)) | |
| return 0; | |
| /* | |
| * Ok, this dying thread is truly holding a futex | |
| * of interest. Set the OWNER_DIED bit atomically | |
| * via cmpxchg, and if the value had FUTEX_WAITERS | |
| * set, wake up a waiter (if any). (We have to do a | |
| * futex_wake() even if OWNER_DIED is already set - | |
| * to handle the rare but possible case of recursive | |
| * thread-death.) The rest of the cleanup is done in | |
| * userspace. | |
| */ | |
| mval = (uval & FUTEX_WAITERS) | FUTEX_OWNER_DIED; | |
| /* | |
| * We are not holding a lock here, but we want to have | |
| * the pagefault_disable/enable() protection because | |
| * we want to handle the fault gracefully. If the | |
| * access fails we try to fault in the futex with R/W | |
| * verification via get_user_pages. get_user() above | |
| * does not guarantee R/W access. If that fails we | |
| * give up and leave the futex locked. | |
| */ | |
| if ((err = futex_cmpxchg_value_locked(&nval, uaddr, uval, mval))) { | |
| switch (err) { | |
| case -EFAULT: | |
| if (fault_in_user_writeable(uaddr)) | |
| return -1; | |
| goto retry; | |
| case -EAGAIN: | |
| cond_resched(); | |
| goto retry; | |
| default: | |
| WARN_ON_ONCE(1); | |
| return err; | |
| } | |
| } | |
| if (nval != uval) | |
| goto retry; | |
| /* | |
| * Wake robust non-PI futexes here. The wakeup of | |
| * PI futexes happens in exit_pi_state(): | |
| */ | |
| if (!pi && (uval & FUTEX_WAITERS)) { | |
| futex_wake(uaddr, FLAGS_SIZE_32 | FLAGS_SHARED, 1, | |
| FUTEX_BITSET_MATCH_ANY); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Fetch a robust-list pointer. Bit 0 signals PI futexes: | |
| */ | |
| static inline int fetch_robust_entry(struct robust_list __user **entry, | |
| struct robust_list __user * __user *head, | |
| unsigned int *pi) | |
| { | |
| unsigned long uentry; | |
| if (get_user(uentry, (unsigned long __user *)head)) | |
| return -EFAULT; | |
| *entry = (void __user *)(uentry & ~1UL); | |
| *pi = uentry & 1; | |
| return 0; | |
| } | |
| /* | |
| * Walk curr->robust_list (very carefully, it's a userspace list!) | |
| * and mark any locks found there dead, and notify any waiters. | |
| * | |
| * We silently return on any sign of list-walking problem. | |
| */ | |
| static void exit_robust_list(struct task_struct *curr) | |
| { | |
| struct robust_list_head __user *head = curr->robust_list; | |
| struct robust_list __user *entry, *next_entry, *pending; | |
| unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; | |
| unsigned int next_pi; | |
| unsigned long futex_offset; | |
| int rc; | |
| /* | |
| * Fetch the list head (which was registered earlier, via | |
| * sys_set_robust_list()): | |
| */ | |
| if (fetch_robust_entry(&entry, &head->list.next, &pi)) | |
| return; | |
| /* | |
| * Fetch the relative futex offset: | |
| */ | |
| if (get_user(futex_offset, &head->futex_offset)) | |
| return; | |
| /* | |
| * Fetch any possibly pending lock-add first, and handle it | |
| * if it exists: | |
| */ | |
| if (fetch_robust_entry(&pending, &head->list_op_pending, &pip)) | |
| return; | |
| next_entry = NULL; /* avoid warning with gcc */ | |
| while (entry != &head->list) { | |
| /* | |
| * Fetch the next entry in the list before calling | |
| * handle_futex_death: | |
| */ | |
| rc = fetch_robust_entry(&next_entry, &entry->next, &next_pi); | |
| /* | |
| * A pending lock might already be on the list, so | |
| * don't process it twice: | |
| */ | |
| if (entry != pending) { | |
| if (handle_futex_death((void __user *)entry + futex_offset, | |
| curr, pi, HANDLE_DEATH_LIST)) | |
| return; | |
| } | |
| if (rc) | |
| return; | |
| entry = next_entry; | |
| pi = next_pi; | |
| /* | |
| * Avoid excessively long or circular lists: | |
| */ | |
| if (!--limit) | |
| break; | |
| cond_resched(); | |
| } | |
| if (pending) { | |
| handle_futex_death((void __user *)pending + futex_offset, | |
| curr, pip, HANDLE_DEATH_PENDING); | |
| } | |
| } | |
| #ifdef CONFIG_COMPAT | |
| static void __user *futex_uaddr(struct robust_list __user *entry, | |
| compat_long_t futex_offset) | |
| { | |
| compat_uptr_t base = ptr_to_compat(entry); | |
| void __user *uaddr = compat_ptr(base + futex_offset); | |
| return uaddr; | |
| } | |
| /* | |
| * Fetch a robust-list pointer. Bit 0 signals PI futexes: | |
| */ | |
| static inline int | |
| compat_fetch_robust_entry(compat_uptr_t *uentry, struct robust_list __user **entry, | |
| compat_uptr_t __user *head, unsigned int *pi) | |
| { | |
| if (get_user(*uentry, head)) | |
| return -EFAULT; | |
| *entry = compat_ptr((*uentry) & ~1); | |
| *pi = (unsigned int)(*uentry) & 1; | |
| return 0; | |
| } | |
| /* | |
| * Walk curr->robust_list (very carefully, it's a userspace list!) | |
| * and mark any locks found there dead, and notify any waiters. | |
| * | |
| * We silently return on any sign of list-walking problem. | |
| */ | |
| static void compat_exit_robust_list(struct task_struct *curr) | |
| { | |
| struct compat_robust_list_head __user *head = curr->compat_robust_list; | |
| struct robust_list __user *entry, *next_entry, *pending; | |
| unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; | |
| unsigned int next_pi; | |
| compat_uptr_t uentry, next_uentry, upending; | |
| compat_long_t futex_offset; | |
| int rc; | |
| /* | |
| * Fetch the list head (which was registered earlier, via | |
| * sys_set_robust_list()): | |
| */ | |
| if (compat_fetch_robust_entry(&uentry, &entry, &head->list.next, &pi)) | |
| return; | |
| /* | |
| * Fetch the relative futex offset: | |
| */ | |
| if (get_user(futex_offset, &head->futex_offset)) | |
| return; | |
| /* | |
| * Fetch any possibly pending lock-add first, and handle it | |
| * if it exists: | |
| */ | |
| if (compat_fetch_robust_entry(&upending, &pending, | |
| &head->list_op_pending, &pip)) | |
| return; | |
| next_entry = NULL; /* avoid warning with gcc */ | |
| while (entry != (struct robust_list __user *) &head->list) { | |
| /* | |
| * Fetch the next entry in the list before calling | |
| * handle_futex_death: | |
| */ | |
| rc = compat_fetch_robust_entry(&next_uentry, &next_entry, | |
| (compat_uptr_t __user *)&entry->next, &next_pi); | |
| /* | |
| * A pending lock might already be on the list, so | |
| * dont process it twice: | |
| */ | |
| if (entry != pending) { | |
| void __user *uaddr = futex_uaddr(entry, futex_offset); | |
| if (handle_futex_death(uaddr, curr, pi, | |
| HANDLE_DEATH_LIST)) | |
| return; | |
| } | |
| if (rc) | |
| return; | |
| uentry = next_uentry; | |
| entry = next_entry; | |
| pi = next_pi; | |
| /* | |
| * Avoid excessively long or circular lists: | |
| */ | |
| if (!--limit) | |
| break; | |
| cond_resched(); | |
| } | |
| if (pending) { | |
| void __user *uaddr = futex_uaddr(pending, futex_offset); | |
| handle_futex_death(uaddr, curr, pip, HANDLE_DEATH_PENDING); | |
| } | |
| } | |
| #endif | |
| #ifdef CONFIG_FUTEX_PI | |
| /* | |
| * This task is holding PI mutexes at exit time => bad. | |
| * Kernel cleans up PI-state, but userspace is likely hosed. | |
| * (Robust-futex cleanup is separate and might save the day for userspace.) | |
| */ | |
| static void exit_pi_state_list(struct task_struct *curr) | |
| { | |
| struct list_head *next, *head = &curr->pi_state_list; | |
| struct futex_pi_state *pi_state; | |
| struct futex_hash_bucket *hb; | |
| union futex_key key = FUTEX_KEY_INIT; | |
| /* | |
| * We are a ZOMBIE and nobody can enqueue itself on | |
| * pi_state_list anymore, but we have to be careful | |
| * versus waiters unqueueing themselves: | |
| */ | |
| raw_spin_lock_irq(&curr->pi_lock); | |
| while (!list_empty(head)) { | |
| next = head->next; | |
| pi_state = list_entry(next, struct futex_pi_state, list); | |
| key = pi_state->key; | |
| hb = futex_hash(&key); | |
| /* | |
| * We can race against put_pi_state() removing itself from the | |
| * list (a waiter going away). put_pi_state() will first | |
| * decrement the reference count and then modify the list, so | |
| * its possible to see the list entry but fail this reference | |
| * acquire. | |
| * | |
| * In that case; drop the locks to let put_pi_state() make | |
| * progress and retry the loop. | |
| */ | |
| if (!refcount_inc_not_zero(&pi_state->refcount)) { | |
| raw_spin_unlock_irq(&curr->pi_lock); | |
| cpu_relax(); | |
| raw_spin_lock_irq(&curr->pi_lock); | |
| continue; | |
| } | |
| raw_spin_unlock_irq(&curr->pi_lock); | |
| spin_lock(&hb->lock); | |
| raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock); | |
| raw_spin_lock(&curr->pi_lock); | |
| /* | |
| * We dropped the pi-lock, so re-check whether this | |
| * task still owns the PI-state: | |
| */ | |
| if (head->next != next) { | |
| /* retain curr->pi_lock for the loop invariant */ | |
| raw_spin_unlock(&pi_state->pi_mutex.wait_lock); | |
| spin_unlock(&hb->lock); | |
| put_pi_state(pi_state); | |
| continue; | |
| } | |
| WARN_ON(pi_state->owner != curr); | |
| WARN_ON(list_empty(&pi_state->list)); | |
| list_del_init(&pi_state->list); | |
| pi_state->owner = NULL; | |
| raw_spin_unlock(&curr->pi_lock); | |
| raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); | |
| spin_unlock(&hb->lock); | |
| rt_mutex_futex_unlock(&pi_state->pi_mutex); | |
| put_pi_state(pi_state); | |
| raw_spin_lock_irq(&curr->pi_lock); | |
| } | |
| raw_spin_unlock_irq(&curr->pi_lock); | |
| } | |
| #else | |
| static inline void exit_pi_state_list(struct task_struct *curr) { } | |
| #endif | |
| static void futex_cleanup(struct task_struct *tsk) | |
| { | |
| if (unlikely(tsk->robust_list)) { | |
| exit_robust_list(tsk); | |
| tsk->robust_list = NULL; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| if (unlikely(tsk->compat_robust_list)) { | |
| compat_exit_robust_list(tsk); | |
| tsk->compat_robust_list = NULL; | |
| } | |
| #endif | |
| if (unlikely(!list_empty(&tsk->pi_state_list))) | |
| exit_pi_state_list(tsk); | |
| } | |
| /** | |
| * futex_exit_recursive - Set the tasks futex state to FUTEX_STATE_DEAD | |
| * @tsk: task to set the state on | |
| * | |
| * Set the futex exit state of the task lockless. The futex waiter code | |
| * observes that state when a task is exiting and loops until the task has | |
| * actually finished the futex cleanup. The worst case for this is that the | |
| * waiter runs through the wait loop until the state becomes visible. | |
| * | |
| * This is called from the recursive fault handling path in make_task_dead(). | |
| * | |
| * This is best effort. Either the futex exit code has run already or | |
| * not. If the OWNER_DIED bit has been set on the futex then the waiter can | |
| * take it over. If not, the problem is pushed back to user space. If the | |
| * futex exit code did not run yet, then an already queued waiter might | |
| * block forever, but there is nothing which can be done about that. | |
| */ | |
| void futex_exit_recursive(struct task_struct *tsk) | |
| { | |
| /* If the state is FUTEX_STATE_EXITING then futex_exit_mutex is held */ | |
| if (tsk->futex_state == FUTEX_STATE_EXITING) | |
| mutex_unlock(&tsk->futex_exit_mutex); | |
| tsk->futex_state = FUTEX_STATE_DEAD; | |
| } | |
| static void futex_cleanup_begin(struct task_struct *tsk) | |
| { | |
| /* | |
| * Prevent various race issues against a concurrent incoming waiter | |
| * including live locks by forcing the waiter to block on | |
| * tsk->futex_exit_mutex when it observes FUTEX_STATE_EXITING in | |
| * attach_to_pi_owner(). | |
| */ | |
| mutex_lock(&tsk->futex_exit_mutex); | |
| /* | |
| * Switch the state to FUTEX_STATE_EXITING under tsk->pi_lock. | |
| * | |
| * This ensures that all subsequent checks of tsk->futex_state in | |
| * attach_to_pi_owner() must observe FUTEX_STATE_EXITING with | |
| * tsk->pi_lock held. | |
| * | |
| * It guarantees also that a pi_state which was queued right before | |
| * the state change under tsk->pi_lock by a concurrent waiter must | |
| * be observed in exit_pi_state_list(). | |
| */ | |
| raw_spin_lock_irq(&tsk->pi_lock); | |
| tsk->futex_state = FUTEX_STATE_EXITING; | |
| raw_spin_unlock_irq(&tsk->pi_lock); | |
| } | |
| static void futex_cleanup_end(struct task_struct *tsk, int state) | |
| { | |
| /* | |
| * Lockless store. The only side effect is that an observer might | |
| * take another loop until it becomes visible. | |
| */ | |
| tsk->futex_state = state; | |
| /* | |
| * Drop the exit protection. This unblocks waiters which observed | |
| * FUTEX_STATE_EXITING to reevaluate the state. | |
| */ | |
| mutex_unlock(&tsk->futex_exit_mutex); | |
| } | |
| void futex_exec_release(struct task_struct *tsk) | |
| { | |
| /* | |
| * The state handling is done for consistency, but in the case of | |
| * exec() there is no way to prevent further damage as the PID stays | |
| * the same. But for the unlikely and arguably buggy case that a | |
| * futex is held on exec(), this provides at least as much state | |
| * consistency protection which is possible. | |
| */ | |
| futex_cleanup_begin(tsk); | |
| futex_cleanup(tsk); | |
| /* | |
| * Reset the state to FUTEX_STATE_OK. The task is alive and about | |
| * exec a new binary. | |
| */ | |
| futex_cleanup_end(tsk, FUTEX_STATE_OK); | |
| } | |
| void futex_exit_release(struct task_struct *tsk) | |
| { | |
| futex_cleanup_begin(tsk); | |
| futex_cleanup(tsk); | |
| futex_cleanup_end(tsk, FUTEX_STATE_DEAD); | |
| } | |
| static int __init futex_init(void) | |
| { | |
| unsigned long hashsize, i; | |
| unsigned int futex_shift; | |
| #ifdef CONFIG_BASE_SMALL | |
| hashsize = 16; | |
| #else | |
| hashsize = roundup_pow_of_two(256 * num_possible_cpus()); | |
| #endif | |
| futex_queues = alloc_large_system_hash("futex", sizeof(*futex_queues), | |
| hashsize, 0, 0, | |
| &futex_shift, NULL, | |
| hashsize, hashsize); | |
| hashsize = 1UL << futex_shift; | |
| for (i = 0; i < hashsize; i++) { | |
| atomic_set(&futex_queues[i].waiters, 0); | |
| plist_head_init(&futex_queues[i].chain); | |
| spin_lock_init(&futex_queues[i].lock); | |
| } | |
| futex_hashmask = hashsize - 1; | |
| return 0; | |
| } | |
| core_initcall(futex_init); |