|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #define DPRINTK(fmt, ...)				\ | 
|  | pr_debug("(%s:%d) " fmt "\n",			\ | 
|  | __func__, __LINE__, ##__VA_ARGS__) | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/fcntl.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <asm/page.h> | 
|  | #include <asm/xen/hypervisor.h> | 
|  | #include <xen/xenbus.h> | 
|  | #include <xen/events.h> | 
|  | #include <xen/page.h> | 
|  | #include <xen/xen.h> | 
|  |  | 
|  | #include <xen/platform_pci.h> | 
|  |  | 
|  | #include "xenbus.h" | 
|  |  | 
|  |  | 
|  |  | 
|  | /* device/<type>/<id> => <type>-<id> */ | 
|  | static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename) | 
|  | { | 
|  | nodename = strchr(nodename, '/'); | 
|  | if (!nodename || strlen(nodename + 1) >= XEN_BUS_ID_SIZE) { | 
|  | pr_warn("bad frontend %s\n", nodename); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | strscpy(bus_id, nodename + 1, XEN_BUS_ID_SIZE); | 
|  | if (!strchr(bus_id, '/')) { | 
|  | pr_warn("bus_id %s no slash\n", bus_id); | 
|  | return -EINVAL; | 
|  | } | 
|  | *strchr(bus_id, '/') = '-'; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* device/<typename>/<name> */ | 
|  | static int xenbus_probe_frontend(struct xen_bus_type *bus, const char *type, | 
|  | const char *name) | 
|  | { | 
|  | char *nodename; | 
|  | int err; | 
|  |  | 
|  | /* ignore console/0 */ | 
|  | if (!strncmp(type, "console", 7) && !strncmp(name, "0", 1)) { | 
|  | DPRINTK("Ignoring buggy device entry console/0"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | nodename = kasprintf(GFP_KERNEL, "%s/%s/%s", bus->root, type, name); | 
|  | if (!nodename) | 
|  | return -ENOMEM; | 
|  |  | 
|  | DPRINTK("%s", nodename); | 
|  |  | 
|  | err = xenbus_probe_node(bus, type, nodename); | 
|  | kfree(nodename); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int xenbus_uevent_frontend(const struct device *_dev, | 
|  | struct kobj_uevent_env *env) | 
|  | { | 
|  | const struct xenbus_device *dev = to_xenbus_device(_dev); | 
|  |  | 
|  | if (add_uevent_var(env, "MODALIAS=xen:%s", dev->devicetype)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void backend_changed(struct xenbus_watch *watch, | 
|  | const char *path, const char *token) | 
|  | { | 
|  | xenbus_otherend_changed(watch, path, token, 1); | 
|  | } | 
|  |  | 
|  | static void xenbus_frontend_delayed_resume(struct work_struct *w) | 
|  | { | 
|  | struct xenbus_device *xdev = container_of(w, struct xenbus_device, work); | 
|  |  | 
|  | xenbus_dev_resume(&xdev->dev); | 
|  | } | 
|  |  | 
|  | static int xenbus_frontend_dev_resume(struct device *dev) | 
|  | { | 
|  | /* | 
|  | * If xenstored is running in this domain, we cannot access the backend | 
|  | * state at the moment, so we need to defer xenbus_dev_resume | 
|  | */ | 
|  | if (xen_store_domain_type == XS_LOCAL) { | 
|  | struct xenbus_device *xdev = to_xenbus_device(dev); | 
|  |  | 
|  | schedule_work(&xdev->work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return xenbus_dev_resume(dev); | 
|  | } | 
|  |  | 
|  | static int xenbus_frontend_dev_probe(struct device *dev) | 
|  | { | 
|  | if (xen_store_domain_type == XS_LOCAL) { | 
|  | struct xenbus_device *xdev = to_xenbus_device(dev); | 
|  | INIT_WORK(&xdev->work, xenbus_frontend_delayed_resume); | 
|  | } | 
|  |  | 
|  | return xenbus_dev_probe(dev); | 
|  | } | 
|  |  | 
|  | static void xenbus_frontend_dev_shutdown(struct device *_dev) | 
|  | { | 
|  | struct xenbus_device *dev = to_xenbus_device(_dev); | 
|  | unsigned long timeout = 5*HZ; | 
|  |  | 
|  | DPRINTK("%s", dev->nodename); | 
|  |  | 
|  | get_device(&dev->dev); | 
|  | if (dev->state != XenbusStateConnected) { | 
|  | pr_info("%s: %s: %s != Connected, skipping\n", | 
|  | __func__, dev->nodename, xenbus_strstate(dev->state)); | 
|  | goto out; | 
|  | } | 
|  | xenbus_switch_state(dev, XenbusStateClosing); | 
|  | timeout = wait_for_completion_timeout(&dev->down, timeout); | 
|  | if (!timeout) | 
|  | pr_info("%s: %s timeout closing device\n", | 
|  | __func__, dev->nodename); | 
|  | out: | 
|  | put_device(&dev->dev); | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops xenbus_pm_ops = { | 
|  | .suspend	= xenbus_dev_suspend, | 
|  | .resume		= xenbus_frontend_dev_resume, | 
|  | .freeze		= xenbus_dev_suspend, | 
|  | .thaw		= xenbus_dev_cancel, | 
|  | .restore	= xenbus_dev_resume, | 
|  | }; | 
|  |  | 
|  | static struct xen_bus_type xenbus_frontend = { | 
|  | .root = "device", | 
|  | .levels = 2,		/* device/type/<id> */ | 
|  | .get_bus_id = frontend_bus_id, | 
|  | .probe = xenbus_probe_frontend, | 
|  | .otherend_changed = backend_changed, | 
|  | .bus = { | 
|  | .name		= "xen", | 
|  | .match		= xenbus_match, | 
|  | .uevent		= xenbus_uevent_frontend, | 
|  | .probe		= xenbus_frontend_dev_probe, | 
|  | .remove		= xenbus_dev_remove, | 
|  | .shutdown	= xenbus_frontend_dev_shutdown, | 
|  | .dev_groups	= xenbus_dev_groups, | 
|  |  | 
|  | .pm		= &xenbus_pm_ops, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void frontend_changed(struct xenbus_watch *watch, | 
|  | const char *path, const char *token) | 
|  | { | 
|  | DPRINTK(""); | 
|  |  | 
|  | xenbus_dev_changed(path, &xenbus_frontend); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* We watch for devices appearing and vanishing. */ | 
|  | static struct xenbus_watch fe_watch = { | 
|  | .node = "device", | 
|  | .callback = frontend_changed, | 
|  | }; | 
|  |  | 
|  | static int read_backend_details(struct xenbus_device *xendev) | 
|  | { | 
|  | return xenbus_read_otherend_details(xendev, "backend-id", "backend"); | 
|  | } | 
|  |  | 
|  | static int is_device_connecting(struct device *dev, void *data, bool ignore_nonessential) | 
|  | { | 
|  | struct xenbus_device *xendev = to_xenbus_device(dev); | 
|  | struct device_driver *drv = data; | 
|  | struct xenbus_driver *xendrv; | 
|  |  | 
|  | /* | 
|  | * A device with no driver will never connect. We care only about | 
|  | * devices which should currently be in the process of connecting. | 
|  | */ | 
|  | if (!dev->driver) | 
|  | return 0; | 
|  |  | 
|  | /* Is this search limited to a particular driver? */ | 
|  | if (drv && (dev->driver != drv)) | 
|  | return 0; | 
|  |  | 
|  | xendrv = to_xenbus_driver(dev->driver); | 
|  |  | 
|  | if (ignore_nonessential && xendrv->not_essential) | 
|  | return 0; | 
|  |  | 
|  | return (xendev->state < XenbusStateConnected || | 
|  | (xendev->state == XenbusStateConnected && | 
|  | xendrv->is_ready && !xendrv->is_ready(xendev))); | 
|  | } | 
|  | static int essential_device_connecting(struct device *dev, void *data) | 
|  | { | 
|  | return is_device_connecting(dev, data, true /* ignore PV[KBB+FB] */); | 
|  | } | 
|  | static int non_essential_device_connecting(struct device *dev, void *data) | 
|  | { | 
|  | return is_device_connecting(dev, data, false); | 
|  | } | 
|  |  | 
|  | static int exists_essential_connecting_device(struct device_driver *drv) | 
|  | { | 
|  | return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, | 
|  | essential_device_connecting); | 
|  | } | 
|  | static int exists_non_essential_connecting_device(struct device_driver *drv) | 
|  | { | 
|  | return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, | 
|  | non_essential_device_connecting); | 
|  | } | 
|  |  | 
|  | static int print_device_status(struct device *dev, void *data) | 
|  | { | 
|  | struct xenbus_device *xendev = to_xenbus_device(dev); | 
|  | struct device_driver *drv = data; | 
|  |  | 
|  | /* Is this operation limited to a particular driver? */ | 
|  | if (drv && (dev->driver != drv)) | 
|  | return 0; | 
|  |  | 
|  | if (!dev->driver) { | 
|  | /* Information only: is this too noisy? */ | 
|  | pr_info("Device with no driver: %s\n", xendev->nodename); | 
|  | } else if (xendev->state < XenbusStateConnected) { | 
|  | enum xenbus_state rstate = XenbusStateUnknown; | 
|  | if (xendev->otherend) | 
|  | rstate = xenbus_read_driver_state(xendev->otherend); | 
|  | pr_warn("Timeout connecting to device: %s (local state %d, remote state %d)\n", | 
|  | xendev->nodename, xendev->state, rstate); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* We only wait for device setup after most initcalls have run. */ | 
|  | static int ready_to_wait_for_devices; | 
|  |  | 
|  | static bool wait_loop(unsigned long start, unsigned int max_delay, | 
|  | unsigned int *seconds_waited) | 
|  | { | 
|  | if (time_after(jiffies, start + (*seconds_waited+5)*HZ)) { | 
|  | if (!*seconds_waited) | 
|  | pr_warn("Waiting for devices to initialise: "); | 
|  | *seconds_waited += 5; | 
|  | pr_cont("%us...", max_delay - *seconds_waited); | 
|  | if (*seconds_waited == max_delay) { | 
|  | pr_cont("\n"); | 
|  | return true; | 
|  | } | 
|  | } | 
|  |  | 
|  | schedule_timeout_interruptible(HZ/10); | 
|  |  | 
|  | return false; | 
|  | } | 
|  | /* | 
|  | * On a 5-minute timeout, wait for all devices currently configured.  We need | 
|  | * to do this to guarantee that the filesystems and / or network devices | 
|  | * needed for boot are available, before we can allow the boot to proceed. | 
|  | * | 
|  | * This needs to be on a late_initcall, to happen after the frontend device | 
|  | * drivers have been initialised, but before the root fs is mounted. | 
|  | * | 
|  | * A possible improvement here would be to have the tools add a per-device | 
|  | * flag to the store entry, indicating whether it is needed at boot time. | 
|  | * This would allow people who knew what they were doing to accelerate their | 
|  | * boot slightly, but of course needs tools or manual intervention to set up | 
|  | * those flags correctly. | 
|  | */ | 
|  | static void wait_for_devices(struct xenbus_driver *xendrv) | 
|  | { | 
|  | unsigned long start = jiffies; | 
|  | struct device_driver *drv = xendrv ? &xendrv->driver : NULL; | 
|  | unsigned int seconds_waited = 0; | 
|  |  | 
|  | if (!ready_to_wait_for_devices || !xen_domain()) | 
|  | return; | 
|  |  | 
|  | while (exists_non_essential_connecting_device(drv)) | 
|  | if (wait_loop(start, 30, &seconds_waited)) | 
|  | break; | 
|  |  | 
|  | /* Skips PVKB and PVFB check.*/ | 
|  | while (exists_essential_connecting_device(drv)) | 
|  | if (wait_loop(start, 270, &seconds_waited)) | 
|  | break; | 
|  |  | 
|  | if (seconds_waited) | 
|  | printk("\n"); | 
|  |  | 
|  | bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, | 
|  | print_device_status); | 
|  | } | 
|  |  | 
|  | int __xenbus_register_frontend(struct xenbus_driver *drv, struct module *owner, | 
|  | const char *mod_name) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | drv->read_otherend_details = read_backend_details; | 
|  |  | 
|  | ret = xenbus_register_driver_common(drv, &xenbus_frontend, | 
|  | owner, mod_name); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* If this driver is loaded as a module wait for devices to attach. */ | 
|  | wait_for_devices(drv); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(__xenbus_register_frontend); | 
|  |  | 
|  | static DECLARE_WAIT_QUEUE_HEAD(backend_state_wq); | 
|  | static int backend_state; | 
|  |  | 
|  | static void xenbus_reset_backend_state_changed(struct xenbus_watch *w, | 
|  | const char *path, const char *token) | 
|  | { | 
|  | if (xenbus_scanf(XBT_NIL, path, "", "%i", | 
|  | &backend_state) != 1) | 
|  | backend_state = XenbusStateUnknown; | 
|  | printk(KERN_DEBUG "XENBUS: backend %s %s\n", | 
|  | path, xenbus_strstate(backend_state)); | 
|  | wake_up(&backend_state_wq); | 
|  | } | 
|  |  | 
|  | static void xenbus_reset_wait_for_backend(char *be, int expected) | 
|  | { | 
|  | long timeout; | 
|  | timeout = wait_event_interruptible_timeout(backend_state_wq, | 
|  | backend_state == expected, 5 * HZ); | 
|  | if (timeout <= 0) | 
|  | pr_info("backend %s timed out\n", be); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset frontend if it is in Connected or Closed state. | 
|  | * Wait for backend to catch up. | 
|  | * State Connected happens during kdump, Closed after kexec. | 
|  | */ | 
|  | static void xenbus_reset_frontend(char *fe, char *be, int be_state) | 
|  | { | 
|  | struct xenbus_watch be_watch; | 
|  |  | 
|  | printk(KERN_DEBUG "XENBUS: backend %s %s\n", | 
|  | be, xenbus_strstate(be_state)); | 
|  |  | 
|  | memset(&be_watch, 0, sizeof(be_watch)); | 
|  | be_watch.node = kasprintf(GFP_NOIO | __GFP_HIGH, "%s/state", be); | 
|  | if (!be_watch.node) | 
|  | return; | 
|  |  | 
|  | be_watch.callback = xenbus_reset_backend_state_changed; | 
|  | backend_state = XenbusStateUnknown; | 
|  |  | 
|  | pr_info("triggering reconnect on %s\n", be); | 
|  | register_xenbus_watch(&be_watch); | 
|  |  | 
|  | /* fall through to forward backend to state XenbusStateInitialising */ | 
|  | switch (be_state) { | 
|  | case XenbusStateConnected: | 
|  | xenbus_printf(XBT_NIL, fe, "state", "%d", XenbusStateClosing); | 
|  | xenbus_reset_wait_for_backend(be, XenbusStateClosing); | 
|  | fallthrough; | 
|  |  | 
|  | case XenbusStateClosing: | 
|  | xenbus_printf(XBT_NIL, fe, "state", "%d", XenbusStateClosed); | 
|  | xenbus_reset_wait_for_backend(be, XenbusStateClosed); | 
|  | fallthrough; | 
|  |  | 
|  | case XenbusStateClosed: | 
|  | xenbus_printf(XBT_NIL, fe, "state", "%d", XenbusStateInitialising); | 
|  | xenbus_reset_wait_for_backend(be, XenbusStateInitWait); | 
|  | } | 
|  |  | 
|  | unregister_xenbus_watch(&be_watch); | 
|  | pr_info("reconnect done on %s\n", be); | 
|  | kfree(be_watch.node); | 
|  | } | 
|  |  | 
|  | static void xenbus_check_frontend(char *class, char *dev) | 
|  | { | 
|  | int be_state, fe_state, err; | 
|  | char *backend, *frontend; | 
|  |  | 
|  | frontend = kasprintf(GFP_NOIO | __GFP_HIGH, "device/%s/%s", class, dev); | 
|  | if (!frontend) | 
|  | return; | 
|  |  | 
|  | err = xenbus_scanf(XBT_NIL, frontend, "state", "%i", &fe_state); | 
|  | if (err != 1) | 
|  | goto out; | 
|  |  | 
|  | switch (fe_state) { | 
|  | case XenbusStateConnected: | 
|  | case XenbusStateClosed: | 
|  | printk(KERN_DEBUG "XENBUS: frontend %s %s\n", | 
|  | frontend, xenbus_strstate(fe_state)); | 
|  | backend = xenbus_read(XBT_NIL, frontend, "backend", NULL); | 
|  | if (IS_ERR_OR_NULL(backend)) | 
|  | goto out; | 
|  | err = xenbus_scanf(XBT_NIL, backend, "state", "%i", &be_state); | 
|  | if (err == 1) | 
|  | xenbus_reset_frontend(frontend, backend, be_state); | 
|  | kfree(backend); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | out: | 
|  | kfree(frontend); | 
|  | } | 
|  |  | 
|  | static void xenbus_reset_state(void) | 
|  | { | 
|  | char **devclass, **dev; | 
|  | int devclass_n, dev_n; | 
|  | int i, j; | 
|  |  | 
|  | devclass = xenbus_directory(XBT_NIL, "device", "", &devclass_n); | 
|  | if (IS_ERR(devclass)) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < devclass_n; i++) { | 
|  | dev = xenbus_directory(XBT_NIL, "device", devclass[i], &dev_n); | 
|  | if (IS_ERR(dev)) | 
|  | continue; | 
|  | for (j = 0; j < dev_n; j++) | 
|  | xenbus_check_frontend(devclass[i], dev[j]); | 
|  | kfree(dev); | 
|  | } | 
|  | kfree(devclass); | 
|  | } | 
|  |  | 
|  | static int frontend_probe_and_watch(struct notifier_block *notifier, | 
|  | unsigned long event, | 
|  | void *data) | 
|  | { | 
|  | /* reset devices in Connected or Closed state */ | 
|  | if (xen_hvm_domain()) | 
|  | xenbus_reset_state(); | 
|  | /* Enumerate devices in xenstore and watch for changes. */ | 
|  | xenbus_probe_devices(&xenbus_frontend); | 
|  | register_xenbus_watch(&fe_watch); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init xenbus_probe_frontend_init(void) | 
|  | { | 
|  | static struct notifier_block xenstore_notifier = { | 
|  | .notifier_call = frontend_probe_and_watch | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | DPRINTK(""); | 
|  |  | 
|  | /* Register ourselves with the kernel bus subsystem */ | 
|  | err = bus_register(&xenbus_frontend.bus); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | register_xenstore_notifier(&xenstore_notifier); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | subsys_initcall(xenbus_probe_frontend_init); | 
|  |  | 
|  | #ifndef MODULE | 
|  | static int __init boot_wait_for_devices(void) | 
|  | { | 
|  | if (!xen_has_pv_devices()) | 
|  | return -ENODEV; | 
|  |  | 
|  | ready_to_wait_for_devices = 1; | 
|  | wait_for_devices(NULL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | late_initcall(boot_wait_for_devices); | 
|  | #endif | 
|  |  | 
|  | MODULE_LICENSE("GPL"); |