|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * sysctl.c: General linux system control interface | 
|  | * | 
|  | * Begun 24 March 1995, Stephen Tweedie | 
|  | * Added /proc support, Dec 1995 | 
|  | * Added bdflush entry and intvec min/max checking, 2/23/96, Tom Dyas. | 
|  | * Added hooks for /proc/sys/net (minor, minor patch), 96/4/1, Mike Shaver. | 
|  | * Added kernel/java-{interpreter,appletviewer}, 96/5/10, Mike Shaver. | 
|  | * Dynamic registration fixes, Stephen Tweedie. | 
|  | * Added kswapd-interval, ctrl-alt-del, printk stuff, 1/8/97, Chris Horn. | 
|  | * Made sysctl support optional via CONFIG_SYSCTL, 1/10/97, Chris | 
|  | *  Horn. | 
|  | * Added proc_doulongvec_ms_jiffies_minmax, 09/08/99, Carlos H. Bauer. | 
|  | * Added proc_doulongvec_minmax, 09/08/99, Carlos H. Bauer. | 
|  | * Changed linked lists to use list.h instead of lists.h, 02/24/00, Bill | 
|  | *  Wendling. | 
|  | * The list_for_each() macro wasn't appropriate for the sysctl loop. | 
|  | *  Removed it and replaced it with older style, 03/23/00, Bill Wendling | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/swap.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sysctl.h> | 
|  | #include <linux/bitmap.h> | 
|  | #include <linux/signal.h> | 
|  | #include <linux/panic.h> | 
|  | #include <linux/printk.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/security.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/kmemleak.h> | 
|  | #include <linux/filter.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/kobject.h> | 
|  | #include <linux/net.h> | 
|  | #include <linux/sysrq.h> | 
|  | #include <linux/highuid.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/ratelimit.h> | 
|  | #include <linux/hugetlb.h> | 
|  | #include <linux/initrd.h> | 
|  | #include <linux/key.h> | 
|  | #include <linux/times.h> | 
|  | #include <linux/limits.h> | 
|  | #include <linux/dcache.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/vmstat.h> | 
|  | #include <linux/nfs_fs.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/ftrace.h> | 
|  | #include <linux/perf_event.h> | 
|  | #include <linux/oom.h> | 
|  | #include <linux/kmod.h> | 
|  | #include <linux/capability.h> | 
|  | #include <linux/binfmts.h> | 
|  | #include <linux/sched/sysctl.h> | 
|  | #include <linux/mount.h> | 
|  | #include <linux/userfaultfd_k.h> | 
|  | #include <linux/pid.h> | 
|  |  | 
|  | #include "../lib/kstrtox.h" | 
|  |  | 
|  | #include <linux/uaccess.h> | 
|  | #include <asm/processor.h> | 
|  |  | 
|  | #ifdef CONFIG_X86 | 
|  | #include <asm/nmi.h> | 
|  | #include <asm/stacktrace.h> | 
|  | #include <asm/io.h> | 
|  | #endif | 
|  | #ifdef CONFIG_SPARC | 
|  | #include <asm/setup.h> | 
|  | #endif | 
|  | #ifdef CONFIG_RT_MUTEXES | 
|  | #include <linux/rtmutex.h> | 
|  | #endif | 
|  |  | 
|  | /* shared constants to be used in various sysctls */ | 
|  | const int sysctl_vals[] = { 0, 1, 2, 3, 4, 100, 200, 1000, 3000, INT_MAX, 65535, -1 }; | 
|  | EXPORT_SYMBOL(sysctl_vals); | 
|  |  | 
|  | const unsigned long sysctl_long_vals[] = { 0, 1, LONG_MAX }; | 
|  | EXPORT_SYMBOL_GPL(sysctl_long_vals); | 
|  |  | 
|  | #if defined(CONFIG_SYSCTL) | 
|  |  | 
|  | /* Constants used for minimum and maximum */ | 
|  |  | 
|  | #ifdef CONFIG_PERF_EVENTS | 
|  | static const int six_hundred_forty_kb = 640 * 1024; | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static const int ngroups_max = NGROUPS_MAX; | 
|  | static const int cap_last_cap = CAP_LAST_CAP; | 
|  |  | 
|  | #ifdef CONFIG_PROC_SYSCTL | 
|  |  | 
|  | /** | 
|  | * enum sysctl_writes_mode - supported sysctl write modes | 
|  | * | 
|  | * @SYSCTL_WRITES_LEGACY: each write syscall must fully contain the sysctl value | 
|  | *	to be written, and multiple writes on the same sysctl file descriptor | 
|  | *	will rewrite the sysctl value, regardless of file position. No warning | 
|  | *	is issued when the initial position is not 0. | 
|  | * @SYSCTL_WRITES_WARN: same as above but warn when the initial file position is | 
|  | *	not 0. | 
|  | * @SYSCTL_WRITES_STRICT: writes to numeric sysctl entries must always be at | 
|  | *	file position 0 and the value must be fully contained in the buffer | 
|  | *	sent to the write syscall. If dealing with strings respect the file | 
|  | *	position, but restrict this to the max length of the buffer, anything | 
|  | *	passed the max length will be ignored. Multiple writes will append | 
|  | *	to the buffer. | 
|  | * | 
|  | * These write modes control how current file position affects the behavior of | 
|  | * updating sysctl values through the proc interface on each write. | 
|  | */ | 
|  | enum sysctl_writes_mode { | 
|  | SYSCTL_WRITES_LEGACY		= -1, | 
|  | SYSCTL_WRITES_WARN		= 0, | 
|  | SYSCTL_WRITES_STRICT		= 1, | 
|  | }; | 
|  |  | 
|  | static enum sysctl_writes_mode sysctl_writes_strict = SYSCTL_WRITES_STRICT; | 
|  | #endif /* CONFIG_PROC_SYSCTL */ | 
|  |  | 
|  | #if defined(HAVE_ARCH_PICK_MMAP_LAYOUT) || \ | 
|  | defined(CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT) | 
|  | int sysctl_legacy_va_layout; | 
|  | #endif | 
|  |  | 
|  | #endif /* CONFIG_SYSCTL */ | 
|  |  | 
|  | /* | 
|  | * /proc/sys support | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_PROC_SYSCTL | 
|  |  | 
|  | static int _proc_do_string(char *data, int maxlen, int write, | 
|  | char *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | size_t len; | 
|  | char c, *p; | 
|  |  | 
|  | if (!data || !maxlen || !*lenp) { | 
|  | *lenp = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (write) { | 
|  | if (sysctl_writes_strict == SYSCTL_WRITES_STRICT) { | 
|  | /* Only continue writes not past the end of buffer. */ | 
|  | len = strlen(data); | 
|  | if (len > maxlen - 1) | 
|  | len = maxlen - 1; | 
|  |  | 
|  | if (*ppos > len) | 
|  | return 0; | 
|  | len = *ppos; | 
|  | } else { | 
|  | /* Start writing from beginning of buffer. */ | 
|  | len = 0; | 
|  | } | 
|  |  | 
|  | *ppos += *lenp; | 
|  | p = buffer; | 
|  | while ((p - buffer) < *lenp && len < maxlen - 1) { | 
|  | c = *(p++); | 
|  | if (c == 0 || c == '\n') | 
|  | break; | 
|  | data[len++] = c; | 
|  | } | 
|  | data[len] = 0; | 
|  | } else { | 
|  | len = strlen(data); | 
|  | if (len > maxlen) | 
|  | len = maxlen; | 
|  |  | 
|  | if (*ppos > len) { | 
|  | *lenp = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | data += *ppos; | 
|  | len  -= *ppos; | 
|  |  | 
|  | if (len > *lenp) | 
|  | len = *lenp; | 
|  | if (len) | 
|  | memcpy(buffer, data, len); | 
|  | if (len < *lenp) { | 
|  | buffer[len] = '\n'; | 
|  | len++; | 
|  | } | 
|  | *lenp = len; | 
|  | *ppos += len; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void warn_sysctl_write(struct ctl_table *table) | 
|  | { | 
|  | pr_warn_once("%s wrote to %s when file position was not 0!\n" | 
|  | "This will not be supported in the future. To silence this\n" | 
|  | "warning, set kernel.sysctl_writes_strict = -1\n", | 
|  | current->comm, table->procname); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_first_pos_non_zero_ignore - check if first position is allowed | 
|  | * @ppos: file position | 
|  | * @table: the sysctl table | 
|  | * | 
|  | * Returns true if the first position is non-zero and the sysctl_writes_strict | 
|  | * mode indicates this is not allowed for numeric input types. String proc | 
|  | * handlers can ignore the return value. | 
|  | */ | 
|  | static bool proc_first_pos_non_zero_ignore(loff_t *ppos, | 
|  | struct ctl_table *table) | 
|  | { | 
|  | if (!*ppos) | 
|  | return false; | 
|  |  | 
|  | switch (sysctl_writes_strict) { | 
|  | case SYSCTL_WRITES_STRICT: | 
|  | return true; | 
|  | case SYSCTL_WRITES_WARN: | 
|  | warn_sysctl_write(table); | 
|  | return false; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dostring - read a string sysctl | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes a string from/to the user buffer. If the kernel | 
|  | * buffer provided is not large enough to hold the string, the | 
|  | * string is truncated. The copied string is %NULL-terminated. | 
|  | * If the string is being read by the user process, it is copied | 
|  | * and a newline '\n' is added. It is truncated if the buffer is | 
|  | * not large enough. | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_dostring(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | if (write) | 
|  | proc_first_pos_non_zero_ignore(ppos, table); | 
|  |  | 
|  | return _proc_do_string(table->data, table->maxlen, write, buffer, lenp, | 
|  | ppos); | 
|  | } | 
|  |  | 
|  | static void proc_skip_spaces(char **buf, size_t *size) | 
|  | { | 
|  | while (*size) { | 
|  | if (!isspace(**buf)) | 
|  | break; | 
|  | (*size)--; | 
|  | (*buf)++; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void proc_skip_char(char **buf, size_t *size, const char v) | 
|  | { | 
|  | while (*size) { | 
|  | if (**buf != v) | 
|  | break; | 
|  | (*size)--; | 
|  | (*buf)++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * strtoul_lenient - parse an ASCII formatted integer from a buffer and only | 
|  | *                   fail on overflow | 
|  | * | 
|  | * @cp: kernel buffer containing the string to parse | 
|  | * @endp: pointer to store the trailing characters | 
|  | * @base: the base to use | 
|  | * @res: where the parsed integer will be stored | 
|  | * | 
|  | * In case of success 0 is returned and @res will contain the parsed integer, | 
|  | * @endp will hold any trailing characters. | 
|  | * This function will fail the parse on overflow. If there wasn't an overflow | 
|  | * the function will defer the decision what characters count as invalid to the | 
|  | * caller. | 
|  | */ | 
|  | static int strtoul_lenient(const char *cp, char **endp, unsigned int base, | 
|  | unsigned long *res) | 
|  | { | 
|  | unsigned long long result; | 
|  | unsigned int rv; | 
|  |  | 
|  | cp = _parse_integer_fixup_radix(cp, &base); | 
|  | rv = _parse_integer(cp, base, &result); | 
|  | if ((rv & KSTRTOX_OVERFLOW) || (result != (unsigned long)result)) | 
|  | return -ERANGE; | 
|  |  | 
|  | cp += rv; | 
|  |  | 
|  | if (endp) | 
|  | *endp = (char *)cp; | 
|  |  | 
|  | *res = (unsigned long)result; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define TMPBUFLEN 22 | 
|  | /** | 
|  | * proc_get_long - reads an ASCII formatted integer from a user buffer | 
|  | * | 
|  | * @buf: a kernel buffer | 
|  | * @size: size of the kernel buffer | 
|  | * @val: this is where the number will be stored | 
|  | * @neg: set to %TRUE if number is negative | 
|  | * @perm_tr: a vector which contains the allowed trailers | 
|  | * @perm_tr_len: size of the perm_tr vector | 
|  | * @tr: pointer to store the trailer character | 
|  | * | 
|  | * In case of success %0 is returned and @buf and @size are updated with | 
|  | * the amount of bytes read. If @tr is non-NULL and a trailing | 
|  | * character exists (size is non-zero after returning from this | 
|  | * function), @tr is updated with the trailing character. | 
|  | */ | 
|  | static int proc_get_long(char **buf, size_t *size, | 
|  | unsigned long *val, bool *neg, | 
|  | const char *perm_tr, unsigned perm_tr_len, char *tr) | 
|  | { | 
|  | char *p, tmp[TMPBUFLEN]; | 
|  | ssize_t len = *size; | 
|  |  | 
|  | if (len <= 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (len > TMPBUFLEN - 1) | 
|  | len = TMPBUFLEN - 1; | 
|  |  | 
|  | memcpy(tmp, *buf, len); | 
|  |  | 
|  | tmp[len] = 0; | 
|  | p = tmp; | 
|  | if (*p == '-' && *size > 1) { | 
|  | *neg = true; | 
|  | p++; | 
|  | } else | 
|  | *neg = false; | 
|  | if (!isdigit(*p)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (strtoul_lenient(p, &p, 0, val)) | 
|  | return -EINVAL; | 
|  |  | 
|  | len = p - tmp; | 
|  |  | 
|  | /* We don't know if the next char is whitespace thus we may accept | 
|  | * invalid integers (e.g. 1234...a) or two integers instead of one | 
|  | * (e.g. 123...1). So lets not allow such large numbers. */ | 
|  | if (len == TMPBUFLEN - 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (len < *size && perm_tr_len && !memchr(perm_tr, *p, perm_tr_len)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (tr && (len < *size)) | 
|  | *tr = *p; | 
|  |  | 
|  | *buf += len; | 
|  | *size -= len; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_put_long - converts an integer to a decimal ASCII formatted string | 
|  | * | 
|  | * @buf: the user buffer | 
|  | * @size: the size of the user buffer | 
|  | * @val: the integer to be converted | 
|  | * @neg: sign of the number, %TRUE for negative | 
|  | * | 
|  | * In case of success @buf and @size are updated with the amount of bytes | 
|  | * written. | 
|  | */ | 
|  | static void proc_put_long(void **buf, size_t *size, unsigned long val, bool neg) | 
|  | { | 
|  | int len; | 
|  | char tmp[TMPBUFLEN], *p = tmp; | 
|  |  | 
|  | sprintf(p, "%s%lu", neg ? "-" : "", val); | 
|  | len = strlen(tmp); | 
|  | if (len > *size) | 
|  | len = *size; | 
|  | memcpy(*buf, tmp, len); | 
|  | *size -= len; | 
|  | *buf += len; | 
|  | } | 
|  | #undef TMPBUFLEN | 
|  |  | 
|  | static void proc_put_char(void **buf, size_t *size, char c) | 
|  | { | 
|  | if (*size) { | 
|  | char **buffer = (char **)buf; | 
|  | **buffer = c; | 
|  |  | 
|  | (*size)--; | 
|  | (*buffer)++; | 
|  | *buf = *buffer; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int do_proc_dointvec_conv(bool *negp, unsigned long *lvalp, | 
|  | int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | if (write) { | 
|  | if (*negp) { | 
|  | if (*lvalp > (unsigned long) INT_MAX + 1) | 
|  | return -EINVAL; | 
|  | WRITE_ONCE(*valp, -*lvalp); | 
|  | } else { | 
|  | if (*lvalp > (unsigned long) INT_MAX) | 
|  | return -EINVAL; | 
|  | WRITE_ONCE(*valp, *lvalp); | 
|  | } | 
|  | } else { | 
|  | int val = READ_ONCE(*valp); | 
|  | if (val < 0) { | 
|  | *negp = true; | 
|  | *lvalp = -(unsigned long)val; | 
|  | } else { | 
|  | *negp = false; | 
|  | *lvalp = (unsigned long)val; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int do_proc_douintvec_conv(unsigned long *lvalp, | 
|  | unsigned int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | if (write) { | 
|  | if (*lvalp > UINT_MAX) | 
|  | return -EINVAL; | 
|  | WRITE_ONCE(*valp, *lvalp); | 
|  | } else { | 
|  | unsigned int val = READ_ONCE(*valp); | 
|  | *lvalp = (unsigned long)val; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char proc_wspace_sep[] = { ' ', '\t', '\n' }; | 
|  |  | 
|  | static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table, | 
|  | int write, void *buffer, | 
|  | size_t *lenp, loff_t *ppos, | 
|  | int (*conv)(bool *negp, unsigned long *lvalp, int *valp, | 
|  | int write, void *data), | 
|  | void *data) | 
|  | { | 
|  | int *i, vleft, first = 1, err = 0; | 
|  | size_t left; | 
|  | char *p; | 
|  |  | 
|  | if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) { | 
|  | *lenp = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | i = (int *) tbl_data; | 
|  | vleft = table->maxlen / sizeof(*i); | 
|  | left = *lenp; | 
|  |  | 
|  | if (!conv) | 
|  | conv = do_proc_dointvec_conv; | 
|  |  | 
|  | if (write) { | 
|  | if (proc_first_pos_non_zero_ignore(ppos, table)) | 
|  | goto out; | 
|  |  | 
|  | if (left > PAGE_SIZE - 1) | 
|  | left = PAGE_SIZE - 1; | 
|  | p = buffer; | 
|  | } | 
|  |  | 
|  | for (; left && vleft--; i++, first=0) { | 
|  | unsigned long lval; | 
|  | bool neg; | 
|  |  | 
|  | if (write) { | 
|  | proc_skip_spaces(&p, &left); | 
|  |  | 
|  | if (!left) | 
|  | break; | 
|  | err = proc_get_long(&p, &left, &lval, &neg, | 
|  | proc_wspace_sep, | 
|  | sizeof(proc_wspace_sep), NULL); | 
|  | if (err) | 
|  | break; | 
|  | if (conv(&neg, &lval, i, 1, data)) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | if (conv(&neg, &lval, i, 0, data)) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (!first) | 
|  | proc_put_char(&buffer, &left, '\t'); | 
|  | proc_put_long(&buffer, &left, lval, neg); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!write && !first && left && !err) | 
|  | proc_put_char(&buffer, &left, '\n'); | 
|  | if (write && !err && left) | 
|  | proc_skip_spaces(&p, &left); | 
|  | if (write && first) | 
|  | return err ? : -EINVAL; | 
|  | *lenp -= left; | 
|  | out: | 
|  | *ppos += *lenp; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int do_proc_dointvec(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos, | 
|  | int (*conv)(bool *negp, unsigned long *lvalp, int *valp, | 
|  | int write, void *data), | 
|  | void *data) | 
|  | { | 
|  | return __do_proc_dointvec(table->data, table, write, | 
|  | buffer, lenp, ppos, conv, data); | 
|  | } | 
|  |  | 
|  | static int do_proc_douintvec_w(unsigned int *tbl_data, | 
|  | struct ctl_table *table, | 
|  | void *buffer, | 
|  | size_t *lenp, loff_t *ppos, | 
|  | int (*conv)(unsigned long *lvalp, | 
|  | unsigned int *valp, | 
|  | int write, void *data), | 
|  | void *data) | 
|  | { | 
|  | unsigned long lval; | 
|  | int err = 0; | 
|  | size_t left; | 
|  | bool neg; | 
|  | char *p = buffer; | 
|  |  | 
|  | left = *lenp; | 
|  |  | 
|  | if (proc_first_pos_non_zero_ignore(ppos, table)) | 
|  | goto bail_early; | 
|  |  | 
|  | if (left > PAGE_SIZE - 1) | 
|  | left = PAGE_SIZE - 1; | 
|  |  | 
|  | proc_skip_spaces(&p, &left); | 
|  | if (!left) { | 
|  | err = -EINVAL; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | err = proc_get_long(&p, &left, &lval, &neg, | 
|  | proc_wspace_sep, | 
|  | sizeof(proc_wspace_sep), NULL); | 
|  | if (err || neg) { | 
|  | err = -EINVAL; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | if (conv(&lval, tbl_data, 1, data)) { | 
|  | err = -EINVAL; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | if (!err && left) | 
|  | proc_skip_spaces(&p, &left); | 
|  |  | 
|  | out_free: | 
|  | if (err) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | /* This is in keeping with old __do_proc_dointvec() */ | 
|  | bail_early: | 
|  | *ppos += *lenp; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int do_proc_douintvec_r(unsigned int *tbl_data, void *buffer, | 
|  | size_t *lenp, loff_t *ppos, | 
|  | int (*conv)(unsigned long *lvalp, | 
|  | unsigned int *valp, | 
|  | int write, void *data), | 
|  | void *data) | 
|  | { | 
|  | unsigned long lval; | 
|  | int err = 0; | 
|  | size_t left; | 
|  |  | 
|  | left = *lenp; | 
|  |  | 
|  | if (conv(&lval, tbl_data, 0, data)) { | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | proc_put_long(&buffer, &left, lval, false); | 
|  | if (!left) | 
|  | goto out; | 
|  |  | 
|  | proc_put_char(&buffer, &left, '\n'); | 
|  |  | 
|  | out: | 
|  | *lenp -= left; | 
|  | *ppos += *lenp; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __do_proc_douintvec(void *tbl_data, struct ctl_table *table, | 
|  | int write, void *buffer, | 
|  | size_t *lenp, loff_t *ppos, | 
|  | int (*conv)(unsigned long *lvalp, | 
|  | unsigned int *valp, | 
|  | int write, void *data), | 
|  | void *data) | 
|  | { | 
|  | unsigned int *i, vleft; | 
|  |  | 
|  | if (!tbl_data || !table->maxlen || !*lenp || (*ppos && !write)) { | 
|  | *lenp = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | i = (unsigned int *) tbl_data; | 
|  | vleft = table->maxlen / sizeof(*i); | 
|  |  | 
|  | /* | 
|  | * Arrays are not supported, keep this simple. *Do not* add | 
|  | * support for them. | 
|  | */ | 
|  | if (vleft != 1) { | 
|  | *lenp = 0; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!conv) | 
|  | conv = do_proc_douintvec_conv; | 
|  |  | 
|  | if (write) | 
|  | return do_proc_douintvec_w(i, table, buffer, lenp, ppos, | 
|  | conv, data); | 
|  | return do_proc_douintvec_r(i, buffer, lenp, ppos, conv, data); | 
|  | } | 
|  |  | 
|  | int do_proc_douintvec(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos, | 
|  | int (*conv)(unsigned long *lvalp, | 
|  | unsigned int *valp, | 
|  | int write, void *data), | 
|  | void *data) | 
|  | { | 
|  | return __do_proc_douintvec(table->data, table, write, | 
|  | buffer, lenp, ppos, conv, data); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dobool - read/write a bool | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes one integer value from/to the user buffer, | 
|  | * treated as an ASCII string. | 
|  | * | 
|  | * table->data must point to a bool variable and table->maxlen must | 
|  | * be sizeof(bool). | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_dobool(struct ctl_table *table, int write, void *buffer, | 
|  | size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct ctl_table tmp; | 
|  | bool *data = table->data; | 
|  | int res, val; | 
|  |  | 
|  | /* Do not support arrays yet. */ | 
|  | if (table->maxlen != sizeof(bool)) | 
|  | return -EINVAL; | 
|  |  | 
|  | tmp = *table; | 
|  | tmp.maxlen = sizeof(val); | 
|  | tmp.data = &val; | 
|  |  | 
|  | val = READ_ONCE(*data); | 
|  | res = proc_dointvec(&tmp, write, buffer, lenp, ppos); | 
|  | if (res) | 
|  | return res; | 
|  | if (write) | 
|  | WRITE_ONCE(*data, val); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dointvec - read a vector of integers | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned int) integer | 
|  | * values from/to the user buffer, treated as an ASCII string. | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_dointvec(struct ctl_table *table, int write, void *buffer, | 
|  | size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_dointvec(table, write, buffer, lenp, ppos, NULL, NULL); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_douintvec - read a vector of unsigned integers | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned int) unsigned integer | 
|  | * values from/to the user buffer, treated as an ASCII string. | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_douintvec(struct ctl_table *table, int write, void *buffer, | 
|  | size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_douintvec(table, write, buffer, lenp, ppos, | 
|  | do_proc_douintvec_conv, NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Taint values can only be increased | 
|  | * This means we can safely use a temporary. | 
|  | */ | 
|  | static int proc_taint(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct ctl_table t; | 
|  | unsigned long tmptaint = get_taint(); | 
|  | int err; | 
|  |  | 
|  | if (write && !capable(CAP_SYS_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | t = *table; | 
|  | t.data = &tmptaint; | 
|  | err = proc_doulongvec_minmax(&t, write, buffer, lenp, ppos); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | if (write) { | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * If we are relying on panic_on_taint not producing | 
|  | * false positives due to userspace input, bail out | 
|  | * before setting the requested taint flags. | 
|  | */ | 
|  | if (panic_on_taint_nousertaint && (tmptaint & panic_on_taint)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Poor man's atomic or. Not worth adding a primitive | 
|  | * to everyone's atomic.h for this | 
|  | */ | 
|  | for (i = 0; i < TAINT_FLAGS_COUNT; i++) | 
|  | if ((1UL << i) & tmptaint) | 
|  | add_taint(i, LOCKDEP_STILL_OK); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * struct do_proc_dointvec_minmax_conv_param - proc_dointvec_minmax() range checking structure | 
|  | * @min: pointer to minimum allowable value | 
|  | * @max: pointer to maximum allowable value | 
|  | * | 
|  | * The do_proc_dointvec_minmax_conv_param structure provides the | 
|  | * minimum and maximum values for doing range checking for those sysctl | 
|  | * parameters that use the proc_dointvec_minmax() handler. | 
|  | */ | 
|  | struct do_proc_dointvec_minmax_conv_param { | 
|  | int *min; | 
|  | int *max; | 
|  | }; | 
|  |  | 
|  | static int do_proc_dointvec_minmax_conv(bool *negp, unsigned long *lvalp, | 
|  | int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | int tmp, ret; | 
|  | struct do_proc_dointvec_minmax_conv_param *param = data; | 
|  | /* | 
|  | * If writing, first do so via a temporary local int so we can | 
|  | * bounds-check it before touching *valp. | 
|  | */ | 
|  | int *ip = write ? &tmp : valp; | 
|  |  | 
|  | ret = do_proc_dointvec_conv(negp, lvalp, ip, write, data); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (write) { | 
|  | if ((param->min && *param->min > tmp) || | 
|  | (param->max && *param->max < tmp)) | 
|  | return -EINVAL; | 
|  | WRITE_ONCE(*valp, tmp); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dointvec_minmax - read a vector of integers with min/max values | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned int) integer | 
|  | * values from/to the user buffer, treated as an ASCII string. | 
|  | * | 
|  | * This routine will ensure the values are within the range specified by | 
|  | * table->extra1 (min) and table->extra2 (max). | 
|  | * | 
|  | * Returns 0 on success or -EINVAL on write when the range check fails. | 
|  | */ | 
|  | int proc_dointvec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct do_proc_dointvec_minmax_conv_param param = { | 
|  | .min = (int *) table->extra1, | 
|  | .max = (int *) table->extra2, | 
|  | }; | 
|  | return do_proc_dointvec(table, write, buffer, lenp, ppos, | 
|  | do_proc_dointvec_minmax_conv, ¶m); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * struct do_proc_douintvec_minmax_conv_param - proc_douintvec_minmax() range checking structure | 
|  | * @min: pointer to minimum allowable value | 
|  | * @max: pointer to maximum allowable value | 
|  | * | 
|  | * The do_proc_douintvec_minmax_conv_param structure provides the | 
|  | * minimum and maximum values for doing range checking for those sysctl | 
|  | * parameters that use the proc_douintvec_minmax() handler. | 
|  | */ | 
|  | struct do_proc_douintvec_minmax_conv_param { | 
|  | unsigned int *min; | 
|  | unsigned int *max; | 
|  | }; | 
|  |  | 
|  | static int do_proc_douintvec_minmax_conv(unsigned long *lvalp, | 
|  | unsigned int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | int ret; | 
|  | unsigned int tmp; | 
|  | struct do_proc_douintvec_minmax_conv_param *param = data; | 
|  | /* write via temporary local uint for bounds-checking */ | 
|  | unsigned int *up = write ? &tmp : valp; | 
|  |  | 
|  | ret = do_proc_douintvec_conv(lvalp, up, write, data); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (write) { | 
|  | if ((param->min && *param->min > tmp) || | 
|  | (param->max && *param->max < tmp)) | 
|  | return -ERANGE; | 
|  |  | 
|  | WRITE_ONCE(*valp, tmp); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_douintvec_minmax - read a vector of unsigned ints with min/max values | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned int) unsigned integer | 
|  | * values from/to the user buffer, treated as an ASCII string. Negative | 
|  | * strings are not allowed. | 
|  | * | 
|  | * This routine will ensure the values are within the range specified by | 
|  | * table->extra1 (min) and table->extra2 (max). There is a final sanity | 
|  | * check for UINT_MAX to avoid having to support wrap around uses from | 
|  | * userspace. | 
|  | * | 
|  | * Returns 0 on success or -ERANGE on write when the range check fails. | 
|  | */ | 
|  | int proc_douintvec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct do_proc_douintvec_minmax_conv_param param = { | 
|  | .min = (unsigned int *) table->extra1, | 
|  | .max = (unsigned int *) table->extra2, | 
|  | }; | 
|  | return do_proc_douintvec(table, write, buffer, lenp, ppos, | 
|  | do_proc_douintvec_minmax_conv, ¶m); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dou8vec_minmax - read a vector of unsigned chars with min/max values | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(u8) unsigned chars | 
|  | * values from/to the user buffer, treated as an ASCII string. Negative | 
|  | * strings are not allowed. | 
|  | * | 
|  | * This routine will ensure the values are within the range specified by | 
|  | * table->extra1 (min) and table->extra2 (max). | 
|  | * | 
|  | * Returns 0 on success or an error on write when the range check fails. | 
|  | */ | 
|  | int proc_dou8vec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct ctl_table tmp; | 
|  | unsigned int min = 0, max = 255U, val; | 
|  | u8 *data = table->data; | 
|  | struct do_proc_douintvec_minmax_conv_param param = { | 
|  | .min = &min, | 
|  | .max = &max, | 
|  | }; | 
|  | int res; | 
|  |  | 
|  | /* Do not support arrays yet. */ | 
|  | if (table->maxlen != sizeof(u8)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (table->extra1) { | 
|  | min = *(unsigned int *) table->extra1; | 
|  | if (min > 255U) | 
|  | return -EINVAL; | 
|  | } | 
|  | if (table->extra2) { | 
|  | max = *(unsigned int *) table->extra2; | 
|  | if (max > 255U) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | tmp = *table; | 
|  |  | 
|  | tmp.maxlen = sizeof(val); | 
|  | tmp.data = &val; | 
|  | val = READ_ONCE(*data); | 
|  | res = do_proc_douintvec(&tmp, write, buffer, lenp, ppos, | 
|  | do_proc_douintvec_minmax_conv, ¶m); | 
|  | if (res) | 
|  | return res; | 
|  | if (write) | 
|  | WRITE_ONCE(*data, val); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(proc_dou8vec_minmax); | 
|  |  | 
|  | #ifdef CONFIG_MAGIC_SYSRQ | 
|  | static int sysrq_sysctl_handler(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | int tmp, ret; | 
|  |  | 
|  | tmp = sysrq_mask(); | 
|  |  | 
|  | ret = __do_proc_dointvec(&tmp, table, write, buffer, | 
|  | lenp, ppos, NULL, NULL); | 
|  | if (ret || !write) | 
|  | return ret; | 
|  |  | 
|  | if (write) | 
|  | sysrq_toggle_support(tmp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, | 
|  | int write, void *buffer, size_t *lenp, loff_t *ppos, | 
|  | unsigned long convmul, unsigned long convdiv) | 
|  | { | 
|  | unsigned long *i, *min, *max; | 
|  | int vleft, first = 1, err = 0; | 
|  | size_t left; | 
|  | char *p; | 
|  |  | 
|  | if (!data || !table->maxlen || !*lenp || (*ppos && !write)) { | 
|  | *lenp = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | i = data; | 
|  | min = table->extra1; | 
|  | max = table->extra2; | 
|  | vleft = table->maxlen / sizeof(unsigned long); | 
|  | left = *lenp; | 
|  |  | 
|  | if (write) { | 
|  | if (proc_first_pos_non_zero_ignore(ppos, table)) | 
|  | goto out; | 
|  |  | 
|  | if (left > PAGE_SIZE - 1) | 
|  | left = PAGE_SIZE - 1; | 
|  | p = buffer; | 
|  | } | 
|  |  | 
|  | for (; left && vleft--; i++, first = 0) { | 
|  | unsigned long val; | 
|  |  | 
|  | if (write) { | 
|  | bool neg; | 
|  |  | 
|  | proc_skip_spaces(&p, &left); | 
|  | if (!left) | 
|  | break; | 
|  |  | 
|  | err = proc_get_long(&p, &left, &val, &neg, | 
|  | proc_wspace_sep, | 
|  | sizeof(proc_wspace_sep), NULL); | 
|  | if (err || neg) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | val = convmul * val / convdiv; | 
|  | if ((min && val < *min) || (max && val > *max)) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  | WRITE_ONCE(*i, val); | 
|  | } else { | 
|  | val = convdiv * READ_ONCE(*i) / convmul; | 
|  | if (!first) | 
|  | proc_put_char(&buffer, &left, '\t'); | 
|  | proc_put_long(&buffer, &left, val, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!write && !first && left && !err) | 
|  | proc_put_char(&buffer, &left, '\n'); | 
|  | if (write && !err) | 
|  | proc_skip_spaces(&p, &left); | 
|  | if (write && first) | 
|  | return err ? : -EINVAL; | 
|  | *lenp -= left; | 
|  | out: | 
|  | *ppos += *lenp; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int do_proc_doulongvec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos, unsigned long convmul, | 
|  | unsigned long convdiv) | 
|  | { | 
|  | return __do_proc_doulongvec_minmax(table->data, table, write, | 
|  | buffer, lenp, ppos, convmul, convdiv); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_doulongvec_minmax - read a vector of long integers with min/max values | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long | 
|  | * values from/to the user buffer, treated as an ASCII string. | 
|  | * | 
|  | * This routine will ensure the values are within the range specified by | 
|  | * table->extra1 (min) and table->extra2 (max). | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_doulongvec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_doulongvec_minmax(table, write, buffer, lenp, ppos, 1l, 1l); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long | 
|  | * values from/to the user buffer, treated as an ASCII string. The values | 
|  | * are treated as milliseconds, and converted to jiffies when they are stored. | 
|  | * | 
|  | * This routine will ensure the values are within the range specified by | 
|  | * table->extra1 (min) and table->extra2 (max). | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_doulongvec_minmax(table, write, buffer, | 
|  | lenp, ppos, HZ, 1000l); | 
|  | } | 
|  |  | 
|  |  | 
|  | static int do_proc_dointvec_jiffies_conv(bool *negp, unsigned long *lvalp, | 
|  | int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | if (write) { | 
|  | if (*lvalp > INT_MAX / HZ) | 
|  | return 1; | 
|  | if (*negp) | 
|  | WRITE_ONCE(*valp, -*lvalp * HZ); | 
|  | else | 
|  | WRITE_ONCE(*valp, *lvalp * HZ); | 
|  | } else { | 
|  | int val = READ_ONCE(*valp); | 
|  | unsigned long lval; | 
|  | if (val < 0) { | 
|  | *negp = true; | 
|  | lval = -(unsigned long)val; | 
|  | } else { | 
|  | *negp = false; | 
|  | lval = (unsigned long)val; | 
|  | } | 
|  | *lvalp = lval / HZ; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int do_proc_dointvec_userhz_jiffies_conv(bool *negp, unsigned long *lvalp, | 
|  | int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | if (write) { | 
|  | if (USER_HZ < HZ && *lvalp > (LONG_MAX / HZ) * USER_HZ) | 
|  | return 1; | 
|  | *valp = clock_t_to_jiffies(*negp ? -*lvalp : *lvalp); | 
|  | } else { | 
|  | int val = *valp; | 
|  | unsigned long lval; | 
|  | if (val < 0) { | 
|  | *negp = true; | 
|  | lval = -(unsigned long)val; | 
|  | } else { | 
|  | *negp = false; | 
|  | lval = (unsigned long)val; | 
|  | } | 
|  | *lvalp = jiffies_to_clock_t(lval); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int do_proc_dointvec_ms_jiffies_conv(bool *negp, unsigned long *lvalp, | 
|  | int *valp, | 
|  | int write, void *data) | 
|  | { | 
|  | if (write) { | 
|  | unsigned long jif = msecs_to_jiffies(*negp ? -*lvalp : *lvalp); | 
|  |  | 
|  | if (jif > INT_MAX) | 
|  | return 1; | 
|  | WRITE_ONCE(*valp, (int)jif); | 
|  | } else { | 
|  | int val = READ_ONCE(*valp); | 
|  | unsigned long lval; | 
|  | if (val < 0) { | 
|  | *negp = true; | 
|  | lval = -(unsigned long)val; | 
|  | } else { | 
|  | *negp = false; | 
|  | lval = (unsigned long)val; | 
|  | } | 
|  | *lvalp = jiffies_to_msecs(lval); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int do_proc_dointvec_ms_jiffies_minmax_conv(bool *negp, unsigned long *lvalp, | 
|  | int *valp, int write, void *data) | 
|  | { | 
|  | int tmp, ret; | 
|  | struct do_proc_dointvec_minmax_conv_param *param = data; | 
|  | /* | 
|  | * If writing, first do so via a temporary local int so we can | 
|  | * bounds-check it before touching *valp. | 
|  | */ | 
|  | int *ip = write ? &tmp : valp; | 
|  |  | 
|  | ret = do_proc_dointvec_ms_jiffies_conv(negp, lvalp, ip, write, data); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (write) { | 
|  | if ((param->min && *param->min > tmp) || | 
|  | (param->max && *param->max < tmp)) | 
|  | return -EINVAL; | 
|  | *valp = tmp; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dointvec_jiffies - read a vector of integers as seconds | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned int) integer | 
|  | * values from/to the user buffer, treated as an ASCII string. | 
|  | * The values read are assumed to be in seconds, and are converted into | 
|  | * jiffies. | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_dointvec_jiffies(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_dointvec(table,write,buffer,lenp,ppos, | 
|  | do_proc_dointvec_jiffies_conv,NULL); | 
|  | } | 
|  |  | 
|  | int proc_dointvec_ms_jiffies_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct do_proc_dointvec_minmax_conv_param param = { | 
|  | .min = (int *) table->extra1, | 
|  | .max = (int *) table->extra2, | 
|  | }; | 
|  | return do_proc_dointvec(table, write, buffer, lenp, ppos, | 
|  | do_proc_dointvec_ms_jiffies_minmax_conv, ¶m); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: pointer to the file position | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned int) integer | 
|  | * values from/to the user buffer, treated as an ASCII string. | 
|  | * The values read are assumed to be in 1/USER_HZ seconds, and | 
|  | * are converted into jiffies. | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_dointvec(table, write, buffer, lenp, ppos, | 
|  | do_proc_dointvec_userhz_jiffies_conv, NULL); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * @ppos: the current position in the file | 
|  | * | 
|  | * Reads/writes up to table->maxlen/sizeof(unsigned int) integer | 
|  | * values from/to the user buffer, treated as an ASCII string. | 
|  | * The values read are assumed to be in 1/1000 seconds, and | 
|  | * are converted into jiffies. | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, void *buffer, | 
|  | size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return do_proc_dointvec(table, write, buffer, lenp, ppos, | 
|  | do_proc_dointvec_ms_jiffies_conv, NULL); | 
|  | } | 
|  |  | 
|  | static int proc_do_cad_pid(struct ctl_table *table, int write, void *buffer, | 
|  | size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct pid *new_pid; | 
|  | pid_t tmp; | 
|  | int r; | 
|  |  | 
|  | tmp = pid_vnr(cad_pid); | 
|  |  | 
|  | r = __do_proc_dointvec(&tmp, table, write, buffer, | 
|  | lenp, ppos, NULL, NULL); | 
|  | if (r || !write) | 
|  | return r; | 
|  |  | 
|  | new_pid = find_get_pid(tmp); | 
|  | if (!new_pid) | 
|  | return -ESRCH; | 
|  |  | 
|  | put_pid(xchg(&cad_pid, new_pid)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * proc_do_large_bitmap - read/write from/to a large bitmap | 
|  | * @table: the sysctl table | 
|  | * @write: %TRUE if this is a write to the sysctl file | 
|  | * @buffer: the user buffer | 
|  | * @lenp: the size of the user buffer | 
|  | * @ppos: file position | 
|  | * | 
|  | * The bitmap is stored at table->data and the bitmap length (in bits) | 
|  | * in table->maxlen. | 
|  | * | 
|  | * We use a range comma separated format (e.g. 1,3-4,10-10) so that | 
|  | * large bitmaps may be represented in a compact manner. Writing into | 
|  | * the file will clear the bitmap then update it with the given input. | 
|  | * | 
|  | * Returns 0 on success. | 
|  | */ | 
|  | int proc_do_large_bitmap(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | int err = 0; | 
|  | size_t left = *lenp; | 
|  | unsigned long bitmap_len = table->maxlen; | 
|  | unsigned long *bitmap = *(unsigned long **) table->data; | 
|  | unsigned long *tmp_bitmap = NULL; | 
|  | char tr_a[] = { '-', ',', '\n' }, tr_b[] = { ',', '\n', 0 }, c; | 
|  |  | 
|  | if (!bitmap || !bitmap_len || !left || (*ppos && !write)) { | 
|  | *lenp = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (write) { | 
|  | char *p = buffer; | 
|  | size_t skipped = 0; | 
|  |  | 
|  | if (left > PAGE_SIZE - 1) { | 
|  | left = PAGE_SIZE - 1; | 
|  | /* How much of the buffer we'll skip this pass */ | 
|  | skipped = *lenp - left; | 
|  | } | 
|  |  | 
|  | tmp_bitmap = bitmap_zalloc(bitmap_len, GFP_KERNEL); | 
|  | if (!tmp_bitmap) | 
|  | return -ENOMEM; | 
|  | proc_skip_char(&p, &left, '\n'); | 
|  | while (!err && left) { | 
|  | unsigned long val_a, val_b; | 
|  | bool neg; | 
|  | size_t saved_left; | 
|  |  | 
|  | /* In case we stop parsing mid-number, we can reset */ | 
|  | saved_left = left; | 
|  | err = proc_get_long(&p, &left, &val_a, &neg, tr_a, | 
|  | sizeof(tr_a), &c); | 
|  | /* | 
|  | * If we consumed the entirety of a truncated buffer or | 
|  | * only one char is left (may be a "-"), then stop here, | 
|  | * reset, & come back for more. | 
|  | */ | 
|  | if ((left <= 1) && skipped) { | 
|  | left = saved_left; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (err) | 
|  | break; | 
|  | if (val_a >= bitmap_len || neg) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | val_b = val_a; | 
|  | if (left) { | 
|  | p++; | 
|  | left--; | 
|  | } | 
|  |  | 
|  | if (c == '-') { | 
|  | err = proc_get_long(&p, &left, &val_b, | 
|  | &neg, tr_b, sizeof(tr_b), | 
|  | &c); | 
|  | /* | 
|  | * If we consumed all of a truncated buffer or | 
|  | * then stop here, reset, & come back for more. | 
|  | */ | 
|  | if (!left && skipped) { | 
|  | left = saved_left; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (err) | 
|  | break; | 
|  | if (val_b >= bitmap_len || neg || | 
|  | val_a > val_b) { | 
|  | err = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (left) { | 
|  | p++; | 
|  | left--; | 
|  | } | 
|  | } | 
|  |  | 
|  | bitmap_set(tmp_bitmap, val_a, val_b - val_a + 1); | 
|  | proc_skip_char(&p, &left, '\n'); | 
|  | } | 
|  | left += skipped; | 
|  | } else { | 
|  | unsigned long bit_a, bit_b = 0; | 
|  | bool first = 1; | 
|  |  | 
|  | while (left) { | 
|  | bit_a = find_next_bit(bitmap, bitmap_len, bit_b); | 
|  | if (bit_a >= bitmap_len) | 
|  | break; | 
|  | bit_b = find_next_zero_bit(bitmap, bitmap_len, | 
|  | bit_a + 1) - 1; | 
|  |  | 
|  | if (!first) | 
|  | proc_put_char(&buffer, &left, ','); | 
|  | proc_put_long(&buffer, &left, bit_a, false); | 
|  | if (bit_a != bit_b) { | 
|  | proc_put_char(&buffer, &left, '-'); | 
|  | proc_put_long(&buffer, &left, bit_b, false); | 
|  | } | 
|  |  | 
|  | first = 0; bit_b++; | 
|  | } | 
|  | proc_put_char(&buffer, &left, '\n'); | 
|  | } | 
|  |  | 
|  | if (!err) { | 
|  | if (write) { | 
|  | if (*ppos) | 
|  | bitmap_or(bitmap, bitmap, tmp_bitmap, bitmap_len); | 
|  | else | 
|  | bitmap_copy(bitmap, tmp_bitmap, bitmap_len); | 
|  | } | 
|  | *lenp -= left; | 
|  | *ppos += *lenp; | 
|  | } | 
|  |  | 
|  | bitmap_free(tmp_bitmap); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #else /* CONFIG_PROC_SYSCTL */ | 
|  |  | 
|  | int proc_dostring(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dobool(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dointvec(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_douintvec(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dointvec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_douintvec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dou8vec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dointvec_jiffies(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dointvec_ms_jiffies_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_doulongvec_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | int proc_do_large_bitmap(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_PROC_SYSCTL */ | 
|  |  | 
|  | #if defined(CONFIG_SYSCTL) | 
|  | int proc_do_static_key(struct ctl_table *table, int write, | 
|  | void *buffer, size_t *lenp, loff_t *ppos) | 
|  | { | 
|  | struct static_key *key = (struct static_key *)table->data; | 
|  | static DEFINE_MUTEX(static_key_mutex); | 
|  | int val, ret; | 
|  | struct ctl_table tmp = { | 
|  | .data   = &val, | 
|  | .maxlen = sizeof(val), | 
|  | .mode   = table->mode, | 
|  | .extra1 = SYSCTL_ZERO, | 
|  | .extra2 = SYSCTL_ONE, | 
|  | }; | 
|  |  | 
|  | if (write && !capable(CAP_SYS_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | mutex_lock(&static_key_mutex); | 
|  | val = static_key_enabled(key); | 
|  | ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); | 
|  | if (write && !ret) { | 
|  | if (val) | 
|  | static_key_enable(key); | 
|  | else | 
|  | static_key_disable(key); | 
|  | } | 
|  | mutex_unlock(&static_key_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct ctl_table kern_table[] = { | 
|  | { | 
|  | .procname	= "panic", | 
|  | .data		= &panic_timeout, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #ifdef CONFIG_PROC_SYSCTL | 
|  | { | 
|  | .procname	= "tainted", | 
|  | .maxlen 	= sizeof(long), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_taint, | 
|  | }, | 
|  | { | 
|  | .procname	= "sysctl_writes_strict", | 
|  | .data		= &sysctl_writes_strict, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_NEG_ONE, | 
|  | .extra2		= SYSCTL_ONE, | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .procname	= "print-fatal-signals", | 
|  | .data		= &print_fatal_signals, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #ifdef CONFIG_SPARC | 
|  | { | 
|  | .procname	= "reboot-cmd", | 
|  | .data		= reboot_command, | 
|  | .maxlen		= 256, | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dostring, | 
|  | }, | 
|  | { | 
|  | .procname	= "stop-a", | 
|  | .data		= &stop_a_enabled, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "scons-poweroff", | 
|  | .data		= &scons_pwroff, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_SPARC64 | 
|  | { | 
|  | .procname	= "tsb-ratio", | 
|  | .data		= &sysctl_tsb_ratio, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_PARISC | 
|  | { | 
|  | .procname	= "soft-power", | 
|  | .data		= &pwrsw_enabled, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW | 
|  | { | 
|  | .procname	= "unaligned-trap", | 
|  | .data		= &unaligned_enabled, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_STACK_TRACER | 
|  | { | 
|  | .procname	= "stack_tracer_enabled", | 
|  | .data		= &stack_tracer_enabled, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= stack_trace_sysctl, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_TRACING | 
|  | { | 
|  | .procname	= "ftrace_dump_on_oops", | 
|  | .data		= &ftrace_dump_on_oops, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "traceoff_on_warning", | 
|  | .data		= &__disable_trace_on_warning, | 
|  | .maxlen		= sizeof(__disable_trace_on_warning), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "tracepoint_printk", | 
|  | .data		= &tracepoint_printk, | 
|  | .maxlen		= sizeof(tracepoint_printk), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= tracepoint_printk_sysctl, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_MODULES | 
|  | { | 
|  | .procname	= "modprobe", | 
|  | .data		= &modprobe_path, | 
|  | .maxlen		= KMOD_PATH_LEN, | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dostring, | 
|  | }, | 
|  | { | 
|  | .procname	= "modules_disabled", | 
|  | .data		= &modules_disabled, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | /* only handle a transition from default "0" to "1" */ | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ONE, | 
|  | .extra2		= SYSCTL_ONE, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_UEVENT_HELPER | 
|  | { | 
|  | .procname	= "hotplug", | 
|  | .data		= &uevent_helper, | 
|  | .maxlen		= UEVENT_HELPER_PATH_LEN, | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dostring, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_MAGIC_SYSRQ | 
|  | { | 
|  | .procname	= "sysrq", | 
|  | .data		= NULL, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= sysrq_sysctl_handler, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_PROC_SYSCTL | 
|  | { | 
|  | .procname	= "cad_pid", | 
|  | .data		= NULL, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0600, | 
|  | .proc_handler	= proc_do_cad_pid, | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .procname	= "threads-max", | 
|  | .data		= NULL, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= sysctl_max_threads, | 
|  | }, | 
|  | { | 
|  | .procname	= "overflowuid", | 
|  | .data		= &overflowuid, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_MAXOLDUID, | 
|  | }, | 
|  | { | 
|  | .procname	= "overflowgid", | 
|  | .data		= &overflowgid, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_MAXOLDUID, | 
|  | }, | 
|  | #ifdef CONFIG_S390 | 
|  | { | 
|  | .procname	= "userprocess_debug", | 
|  | .data		= &show_unhandled_signals, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .procname	= "pid_max", | 
|  | .data		= &pid_max, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= &pid_max_min, | 
|  | .extra2		= &pid_max_max, | 
|  | }, | 
|  | { | 
|  | .procname	= "panic_on_oops", | 
|  | .data		= &panic_on_oops, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "panic_print", | 
|  | .data		= &panic_print, | 
|  | .maxlen		= sizeof(unsigned long), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_doulongvec_minmax, | 
|  | }, | 
|  | { | 
|  | .procname	= "ngroups_max", | 
|  | .data		= (void *)&ngroups_max, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0444, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "cap_last_cap", | 
|  | .data		= (void *)&cap_last_cap, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0444, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) | 
|  | { | 
|  | .procname       = "unknown_nmi_panic", | 
|  | .data           = &unknown_nmi_panic, | 
|  | .maxlen         = sizeof (int), | 
|  | .mode           = 0644, | 
|  | .proc_handler   = proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  |  | 
|  | #if (defined(CONFIG_X86_32) || defined(CONFIG_PARISC)) && \ | 
|  | defined(CONFIG_DEBUG_STACKOVERFLOW) | 
|  | { | 
|  | .procname	= "panic_on_stackoverflow", | 
|  | .data		= &sysctl_panic_on_stackoverflow, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #if defined(CONFIG_X86) | 
|  | { | 
|  | .procname	= "panic_on_unrecovered_nmi", | 
|  | .data		= &panic_on_unrecovered_nmi, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "panic_on_io_nmi", | 
|  | .data		= &panic_on_io_nmi, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "bootloader_type", | 
|  | .data		= &bootloader_type, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0444, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "bootloader_version", | 
|  | .data		= &bootloader_version, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0444, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "io_delay_type", | 
|  | .data		= &io_delay_type, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #if defined(CONFIG_MMU) | 
|  | { | 
|  | .procname	= "randomize_va_space", | 
|  | .data		= &randomize_va_space, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #if defined(CONFIG_S390) && defined(CONFIG_SMP) | 
|  | { | 
|  | .procname	= "spin_retry", | 
|  | .data		= &spin_retry, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #if	defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86) | 
|  | { | 
|  | .procname	= "acpi_video_flags", | 
|  | .data		= &acpi_realmode_flags, | 
|  | .maxlen		= sizeof (unsigned long), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_doulongvec_minmax, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN | 
|  | { | 
|  | .procname	= "ignore-unaligned-usertrap", | 
|  | .data		= &no_unaligned_warning, | 
|  | .maxlen		= sizeof (int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_RT_MUTEXES | 
|  | { | 
|  | .procname	= "max_lock_depth", | 
|  | .data		= &max_lock_depth, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_PERF_EVENTS | 
|  | /* | 
|  | * User-space scripts rely on the existence of this file | 
|  | * as a feature check for perf_events being enabled. | 
|  | * | 
|  | * So it's an ABI, do not remove! | 
|  | */ | 
|  | { | 
|  | .procname	= "perf_event_paranoid", | 
|  | .data		= &sysctl_perf_event_paranoid, | 
|  | .maxlen		= sizeof(sysctl_perf_event_paranoid), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "perf_event_mlock_kb", | 
|  | .data		= &sysctl_perf_event_mlock, | 
|  | .maxlen		= sizeof(sysctl_perf_event_mlock), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | }, | 
|  | { | 
|  | .procname	= "perf_event_max_sample_rate", | 
|  | .data		= &sysctl_perf_event_sample_rate, | 
|  | .maxlen		= sizeof(sysctl_perf_event_sample_rate), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= perf_event_max_sample_rate_handler, | 
|  | .extra1		= SYSCTL_ONE, | 
|  | }, | 
|  | { | 
|  | .procname	= "perf_cpu_time_max_percent", | 
|  | .data		= &sysctl_perf_cpu_time_max_percent, | 
|  | .maxlen		= sizeof(sysctl_perf_cpu_time_max_percent), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= perf_cpu_time_max_percent_handler, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_ONE_HUNDRED, | 
|  | }, | 
|  | { | 
|  | .procname	= "perf_event_max_stack", | 
|  | .data		= &sysctl_perf_event_max_stack, | 
|  | .maxlen		= sizeof(sysctl_perf_event_max_stack), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= perf_event_max_stack_handler, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= (void *)&six_hundred_forty_kb, | 
|  | }, | 
|  | { | 
|  | .procname	= "perf_event_max_contexts_per_stack", | 
|  | .data		= &sysctl_perf_event_max_contexts_per_stack, | 
|  | .maxlen		= sizeof(sysctl_perf_event_max_contexts_per_stack), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= perf_event_max_stack_handler, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_ONE_THOUSAND, | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .procname	= "panic_on_warn", | 
|  | .data		= &panic_on_warn, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_ONE, | 
|  | }, | 
|  | #ifdef CONFIG_TREE_RCU | 
|  | { | 
|  | .procname	= "panic_on_rcu_stall", | 
|  | .data		= &sysctl_panic_on_rcu_stall, | 
|  | .maxlen		= sizeof(sysctl_panic_on_rcu_stall), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_ONE, | 
|  | }, | 
|  | { | 
|  | .procname	= "max_rcu_stall_to_panic", | 
|  | .data		= &sysctl_max_rcu_stall_to_panic, | 
|  | .maxlen		= sizeof(sysctl_max_rcu_stall_to_panic), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ONE, | 
|  | .extra2		= SYSCTL_INT_MAX, | 
|  | }, | 
|  | #endif | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static struct ctl_table vm_table[] = { | 
|  | { | 
|  | .procname	= "overcommit_memory", | 
|  | .data		= &sysctl_overcommit_memory, | 
|  | .maxlen		= sizeof(sysctl_overcommit_memory), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= overcommit_policy_handler, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_TWO, | 
|  | }, | 
|  | { | 
|  | .procname	= "overcommit_ratio", | 
|  | .data		= &sysctl_overcommit_ratio, | 
|  | .maxlen		= sizeof(sysctl_overcommit_ratio), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= overcommit_ratio_handler, | 
|  | }, | 
|  | { | 
|  | .procname	= "overcommit_kbytes", | 
|  | .data		= &sysctl_overcommit_kbytes, | 
|  | .maxlen		= sizeof(sysctl_overcommit_kbytes), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= overcommit_kbytes_handler, | 
|  | }, | 
|  | { | 
|  | .procname	= "page-cluster", | 
|  | .data		= &page_cluster, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= (void *)&page_cluster_max, | 
|  | }, | 
|  | { | 
|  | .procname	= "dirtytime_expire_seconds", | 
|  | .data		= &dirtytime_expire_interval, | 
|  | .maxlen		= sizeof(dirtytime_expire_interval), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= dirtytime_interval_handler, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | { | 
|  | .procname	= "swappiness", | 
|  | .data		= &vm_swappiness, | 
|  | .maxlen		= sizeof(vm_swappiness), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_TWO_HUNDRED, | 
|  | }, | 
|  | #ifdef CONFIG_NUMA | 
|  | { | 
|  | .procname	= "numa_stat", | 
|  | .data		= &sysctl_vm_numa_stat, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= sysctl_vm_numa_stat_handler, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_ONE, | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .procname	= "drop_caches", | 
|  | .data		= &sysctl_drop_caches, | 
|  | .maxlen		= sizeof(int), | 
|  | .mode		= 0200, | 
|  | .proc_handler	= drop_caches_sysctl_handler, | 
|  | .extra1		= SYSCTL_ONE, | 
|  | .extra2		= SYSCTL_FOUR, | 
|  | }, | 
|  | { | 
|  | .procname	= "page_lock_unfairness", | 
|  | .data		= &sysctl_page_lock_unfairness, | 
|  | .maxlen		= sizeof(sysctl_page_lock_unfairness), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | #ifdef CONFIG_MMU | 
|  | { | 
|  | .procname	= "max_map_count", | 
|  | .data		= &sysctl_max_map_count, | 
|  | .maxlen		= sizeof(sysctl_max_map_count), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | #else | 
|  | { | 
|  | .procname	= "nr_trim_pages", | 
|  | .data		= &sysctl_nr_trim_pages, | 
|  | .maxlen		= sizeof(sysctl_nr_trim_pages), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .procname	= "vfs_cache_pressure", | 
|  | .data		= &sysctl_vfs_cache_pressure, | 
|  | .maxlen		= sizeof(sysctl_vfs_cache_pressure), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | #if defined(HAVE_ARCH_PICK_MMAP_LAYOUT) || \ | 
|  | defined(CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT) | 
|  | { | 
|  | .procname	= "legacy_va_layout", | 
|  | .data		= &sysctl_legacy_va_layout, | 
|  | .maxlen		= sizeof(sysctl_legacy_va_layout), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_NUMA | 
|  | { | 
|  | .procname	= "zone_reclaim_mode", | 
|  | .data		= &node_reclaim_mode, | 
|  | .maxlen		= sizeof(node_reclaim_mode), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_SMP | 
|  | { | 
|  | .procname	= "stat_interval", | 
|  | .data		= &sysctl_stat_interval, | 
|  | .maxlen		= sizeof(sysctl_stat_interval), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec_jiffies, | 
|  | }, | 
|  | { | 
|  | .procname	= "stat_refresh", | 
|  | .data		= NULL, | 
|  | .maxlen		= 0, | 
|  | .mode		= 0600, | 
|  | .proc_handler	= vmstat_refresh, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_MMU | 
|  | { | 
|  | .procname	= "mmap_min_addr", | 
|  | .data		= &dac_mmap_min_addr, | 
|  | .maxlen		= sizeof(unsigned long), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= mmap_min_addr_handler, | 
|  | }, | 
|  | #endif | 
|  | #if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \ | 
|  | (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL)) | 
|  | { | 
|  | .procname	= "vdso_enabled", | 
|  | #ifdef CONFIG_X86_32 | 
|  | .data		= &vdso32_enabled, | 
|  | .maxlen		= sizeof(vdso32_enabled), | 
|  | #else | 
|  | .data		= &vdso_enabled, | 
|  | .maxlen		= sizeof(vdso_enabled), | 
|  | #endif | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_dointvec, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | }, | 
|  | #endif | 
|  | { | 
|  | .procname	= "user_reserve_kbytes", | 
|  | .data		= &sysctl_user_reserve_kbytes, | 
|  | .maxlen		= sizeof(sysctl_user_reserve_kbytes), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_doulongvec_minmax, | 
|  | }, | 
|  | { | 
|  | .procname	= "admin_reserve_kbytes", | 
|  | .data		= &sysctl_admin_reserve_kbytes, | 
|  | .maxlen		= sizeof(sysctl_admin_reserve_kbytes), | 
|  | .mode		= 0644, | 
|  | .proc_handler	= proc_doulongvec_minmax, | 
|  | }, | 
|  | #ifdef CONFIG_HAVE_ARCH_MMAP_RND_BITS | 
|  | { | 
|  | .procname	= "mmap_rnd_bits", | 
|  | .data		= &mmap_rnd_bits, | 
|  | .maxlen		= sizeof(mmap_rnd_bits), | 
|  | .mode		= 0600, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= (void *)&mmap_rnd_bits_min, | 
|  | .extra2		= (void *)&mmap_rnd_bits_max, | 
|  | }, | 
|  | #endif | 
|  | #ifdef CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS | 
|  | { | 
|  | .procname	= "mmap_rnd_compat_bits", | 
|  | .data		= &mmap_rnd_compat_bits, | 
|  | .maxlen		= sizeof(mmap_rnd_compat_bits), | 
|  | .mode		= 0600, | 
|  | .proc_handler	= proc_dointvec_minmax, | 
|  | .extra1		= (void *)&mmap_rnd_compat_bits_min, | 
|  | .extra2		= (void *)&mmap_rnd_compat_bits_max, | 
|  | }, | 
|  | #endif | 
|  | { } | 
|  | }; | 
|  |  | 
|  | int __init sysctl_init_bases(void) | 
|  | { | 
|  | register_sysctl_init("kernel", kern_table); | 
|  | register_sysctl_init("vm", vm_table); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_SYSCTL */ | 
|  | /* | 
|  | * No sense putting this after each symbol definition, twice, | 
|  | * exception granted :-) | 
|  | */ | 
|  | EXPORT_SYMBOL(proc_dobool); | 
|  | EXPORT_SYMBOL(proc_dointvec); | 
|  | EXPORT_SYMBOL(proc_douintvec); | 
|  | EXPORT_SYMBOL(proc_dointvec_jiffies); | 
|  | EXPORT_SYMBOL(proc_dointvec_minmax); | 
|  | EXPORT_SYMBOL_GPL(proc_douintvec_minmax); | 
|  | EXPORT_SYMBOL(proc_dointvec_userhz_jiffies); | 
|  | EXPORT_SYMBOL(proc_dointvec_ms_jiffies); | 
|  | EXPORT_SYMBOL(proc_dostring); | 
|  | EXPORT_SYMBOL(proc_doulongvec_minmax); | 
|  | EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax); | 
|  | EXPORT_SYMBOL(proc_do_large_bitmap); |