| // SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) | |
| /* Copyright (c) 2019 Facebook */ | |
| #ifdef __KERNEL__ | |
| #include <linux/bpf.h> | |
| #include <linux/btf.h> | |
| #include <linux/string.h> | |
| #include <linux/bpf_verifier.h> | |
| #include "relo_core.h" | |
| static const char *btf_kind_str(const struct btf_type *t) | |
| { | |
| return btf_type_str(t); | |
| } | |
| static bool is_ldimm64_insn(struct bpf_insn *insn) | |
| { | |
| return insn->code == (BPF_LD | BPF_IMM | BPF_DW); | |
| } | |
| static const struct btf_type * | |
| skip_mods_and_typedefs(const struct btf *btf, u32 id, u32 *res_id) | |
| { | |
| return btf_type_skip_modifiers(btf, id, res_id); | |
| } | |
| static const char *btf__name_by_offset(const struct btf *btf, u32 offset) | |
| { | |
| return btf_name_by_offset(btf, offset); | |
| } | |
| static s64 btf__resolve_size(const struct btf *btf, u32 type_id) | |
| { | |
| const struct btf_type *t; | |
| int size; | |
| t = btf_type_by_id(btf, type_id); | |
| t = btf_resolve_size(btf, t, &size); | |
| if (IS_ERR(t)) | |
| return PTR_ERR(t); | |
| return size; | |
| } | |
| enum libbpf_print_level { | |
| LIBBPF_WARN, | |
| LIBBPF_INFO, | |
| LIBBPF_DEBUG, | |
| }; | |
| #undef pr_warn | |
| #undef pr_info | |
| #undef pr_debug | |
| #define pr_warn(fmt, log, ...) bpf_log((void *)log, fmt, "", ##__VA_ARGS__) | |
| #define pr_info(fmt, log, ...) bpf_log((void *)log, fmt, "", ##__VA_ARGS__) | |
| #define pr_debug(fmt, log, ...) bpf_log((void *)log, fmt, "", ##__VA_ARGS__) | |
| #define libbpf_print(level, fmt, ...) bpf_log((void *)prog_name, fmt, ##__VA_ARGS__) | |
| #else | |
| #include <stdio.h> | |
| #include <string.h> | |
| #include <errno.h> | |
| #include <ctype.h> | |
| #include <linux/err.h> | |
| #include "libbpf.h" | |
| #include "bpf.h" | |
| #include "btf.h" | |
| #include "str_error.h" | |
| #include "libbpf_internal.h" | |
| #endif | |
| static bool is_flex_arr(const struct btf *btf, | |
| const struct bpf_core_accessor *acc, | |
| const struct btf_array *arr) | |
| { | |
| const struct btf_type *t; | |
| /* not a flexible array, if not inside a struct or has non-zero size */ | |
| if (!acc->name || arr->nelems > 0) | |
| return false; | |
| /* has to be the last member of enclosing struct */ | |
| t = btf_type_by_id(btf, acc->type_id); | |
| return acc->idx == btf_vlen(t) - 1; | |
| } | |
| static const char *core_relo_kind_str(enum bpf_core_relo_kind kind) | |
| { | |
| switch (kind) { | |
| case BPF_CORE_FIELD_BYTE_OFFSET: return "byte_off"; | |
| case BPF_CORE_FIELD_BYTE_SIZE: return "byte_sz"; | |
| case BPF_CORE_FIELD_EXISTS: return "field_exists"; | |
| case BPF_CORE_FIELD_SIGNED: return "signed"; | |
| case BPF_CORE_FIELD_LSHIFT_U64: return "lshift_u64"; | |
| case BPF_CORE_FIELD_RSHIFT_U64: return "rshift_u64"; | |
| case BPF_CORE_TYPE_ID_LOCAL: return "local_type_id"; | |
| case BPF_CORE_TYPE_ID_TARGET: return "target_type_id"; | |
| case BPF_CORE_TYPE_EXISTS: return "type_exists"; | |
| case BPF_CORE_TYPE_MATCHES: return "type_matches"; | |
| case BPF_CORE_TYPE_SIZE: return "type_size"; | |
| case BPF_CORE_ENUMVAL_EXISTS: return "enumval_exists"; | |
| case BPF_CORE_ENUMVAL_VALUE: return "enumval_value"; | |
| default: return "unknown"; | |
| } | |
| } | |
| static bool core_relo_is_field_based(enum bpf_core_relo_kind kind) | |
| { | |
| switch (kind) { | |
| case BPF_CORE_FIELD_BYTE_OFFSET: | |
| case BPF_CORE_FIELD_BYTE_SIZE: | |
| case BPF_CORE_FIELD_EXISTS: | |
| case BPF_CORE_FIELD_SIGNED: | |
| case BPF_CORE_FIELD_LSHIFT_U64: | |
| case BPF_CORE_FIELD_RSHIFT_U64: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static bool core_relo_is_type_based(enum bpf_core_relo_kind kind) | |
| { | |
| switch (kind) { | |
| case BPF_CORE_TYPE_ID_LOCAL: | |
| case BPF_CORE_TYPE_ID_TARGET: | |
| case BPF_CORE_TYPE_EXISTS: | |
| case BPF_CORE_TYPE_MATCHES: | |
| case BPF_CORE_TYPE_SIZE: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static bool core_relo_is_enumval_based(enum bpf_core_relo_kind kind) | |
| { | |
| switch (kind) { | |
| case BPF_CORE_ENUMVAL_EXISTS: | |
| case BPF_CORE_ENUMVAL_VALUE: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| int __bpf_core_types_are_compat(const struct btf *local_btf, __u32 local_id, | |
| const struct btf *targ_btf, __u32 targ_id, int level) | |
| { | |
| const struct btf_type *local_type, *targ_type; | |
| int depth = 32; /* max recursion depth */ | |
| /* caller made sure that names match (ignoring flavor suffix) */ | |
| local_type = btf_type_by_id(local_btf, local_id); | |
| targ_type = btf_type_by_id(targ_btf, targ_id); | |
| if (!btf_kind_core_compat(local_type, targ_type)) | |
| return 0; | |
| recur: | |
| depth--; | |
| if (depth < 0) | |
| return -EINVAL; | |
| local_type = skip_mods_and_typedefs(local_btf, local_id, &local_id); | |
| targ_type = skip_mods_and_typedefs(targ_btf, targ_id, &targ_id); | |
| if (!local_type || !targ_type) | |
| return -EINVAL; | |
| if (!btf_kind_core_compat(local_type, targ_type)) | |
| return 0; | |
| switch (btf_kind(local_type)) { | |
| case BTF_KIND_UNKN: | |
| case BTF_KIND_STRUCT: | |
| case BTF_KIND_UNION: | |
| case BTF_KIND_ENUM: | |
| case BTF_KIND_FWD: | |
| case BTF_KIND_ENUM64: | |
| return 1; | |
| case BTF_KIND_INT: | |
| /* just reject deprecated bitfield-like integers; all other | |
| * integers are by default compatible between each other | |
| */ | |
| return btf_int_offset(local_type) == 0 && btf_int_offset(targ_type) == 0; | |
| case BTF_KIND_PTR: | |
| local_id = local_type->type; | |
| targ_id = targ_type->type; | |
| goto recur; | |
| case BTF_KIND_ARRAY: | |
| local_id = btf_array(local_type)->type; | |
| targ_id = btf_array(targ_type)->type; | |
| goto recur; | |
| case BTF_KIND_FUNC_PROTO: { | |
| struct btf_param *local_p = btf_params(local_type); | |
| struct btf_param *targ_p = btf_params(targ_type); | |
| __u16 local_vlen = btf_vlen(local_type); | |
| __u16 targ_vlen = btf_vlen(targ_type); | |
| int i, err; | |
| if (local_vlen != targ_vlen) | |
| return 0; | |
| for (i = 0; i < local_vlen; i++, local_p++, targ_p++) { | |
| if (level <= 0) | |
| return -EINVAL; | |
| skip_mods_and_typedefs(local_btf, local_p->type, &local_id); | |
| skip_mods_and_typedefs(targ_btf, targ_p->type, &targ_id); | |
| err = __bpf_core_types_are_compat(local_btf, local_id, targ_btf, targ_id, | |
| level - 1); | |
| if (err <= 0) | |
| return err; | |
| } | |
| /* tail recurse for return type check */ | |
| skip_mods_and_typedefs(local_btf, local_type->type, &local_id); | |
| skip_mods_and_typedefs(targ_btf, targ_type->type, &targ_id); | |
| goto recur; | |
| } | |
| default: | |
| pr_warn("unexpected kind %s relocated, local [%d], target [%d]\n", | |
| btf_kind_str(local_type), local_id, targ_id); | |
| return 0; | |
| } | |
| } | |
| /* | |
| * Turn bpf_core_relo into a low- and high-level spec representation, | |
| * validating correctness along the way, as well as calculating resulting | |
| * field bit offset, specified by accessor string. Low-level spec captures | |
| * every single level of nestedness, including traversing anonymous | |
| * struct/union members. High-level one only captures semantically meaningful | |
| * "turning points": named fields and array indicies. | |
| * E.g., for this case: | |
| * | |
| * struct sample { | |
| * int __unimportant; | |
| * struct { | |
| * int __1; | |
| * int __2; | |
| * int a[7]; | |
| * }; | |
| * }; | |
| * | |
| * struct sample *s = ...; | |
| * | |
| * int x = &s->a[3]; // access string = '0:1:2:3' | |
| * | |
| * Low-level spec has 1:1 mapping with each element of access string (it's | |
| * just a parsed access string representation): [0, 1, 2, 3]. | |
| * | |
| * High-level spec will capture only 3 points: | |
| * - initial zero-index access by pointer (&s->... is the same as &s[0]...); | |
| * - field 'a' access (corresponds to '2' in low-level spec); | |
| * - array element #3 access (corresponds to '3' in low-level spec). | |
| * | |
| * Type-based relocations (TYPE_EXISTS/TYPE_MATCHES/TYPE_SIZE, | |
| * TYPE_ID_LOCAL/TYPE_ID_TARGET) don't capture any field information. Their | |
| * spec and raw_spec are kept empty. | |
| * | |
| * Enum value-based relocations (ENUMVAL_EXISTS/ENUMVAL_VALUE) use access | |
| * string to specify enumerator's value index that need to be relocated. | |
| */ | |
| int bpf_core_parse_spec(const char *prog_name, const struct btf *btf, | |
| const struct bpf_core_relo *relo, | |
| struct bpf_core_spec *spec) | |
| { | |
| int access_idx, parsed_len, i; | |
| struct bpf_core_accessor *acc; | |
| const struct btf_type *t; | |
| const char *name, *spec_str; | |
| __u32 id, name_off; | |
| __s64 sz; | |
| spec_str = btf__name_by_offset(btf, relo->access_str_off); | |
| if (str_is_empty(spec_str) || *spec_str == ':') | |
| return -EINVAL; | |
| memset(spec, 0, sizeof(*spec)); | |
| spec->btf = btf; | |
| spec->root_type_id = relo->type_id; | |
| spec->relo_kind = relo->kind; | |
| /* type-based relocations don't have a field access string */ | |
| if (core_relo_is_type_based(relo->kind)) { | |
| if (strcmp(spec_str, "0")) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* parse spec_str="0:1:2:3:4" into array raw_spec=[0, 1, 2, 3, 4] */ | |
| while (*spec_str) { | |
| if (*spec_str == ':') | |
| ++spec_str; | |
| if (sscanf(spec_str, "%d%n", &access_idx, &parsed_len) != 1) | |
| return -EINVAL; | |
| if (spec->raw_len == BPF_CORE_SPEC_MAX_LEN) | |
| return -E2BIG; | |
| spec_str += parsed_len; | |
| spec->raw_spec[spec->raw_len++] = access_idx; | |
| } | |
| if (spec->raw_len == 0) | |
| return -EINVAL; | |
| t = skip_mods_and_typedefs(btf, relo->type_id, &id); | |
| if (!t) | |
| return -EINVAL; | |
| access_idx = spec->raw_spec[0]; | |
| acc = &spec->spec[0]; | |
| acc->type_id = id; | |
| acc->idx = access_idx; | |
| spec->len++; | |
| if (core_relo_is_enumval_based(relo->kind)) { | |
| if (!btf_is_any_enum(t) || spec->raw_len > 1 || access_idx >= btf_vlen(t)) | |
| return -EINVAL; | |
| /* record enumerator name in a first accessor */ | |
| name_off = btf_is_enum(t) ? btf_enum(t)[access_idx].name_off | |
| : btf_enum64(t)[access_idx].name_off; | |
| acc->name = btf__name_by_offset(btf, name_off); | |
| return 0; | |
| } | |
| if (!core_relo_is_field_based(relo->kind)) | |
| return -EINVAL; | |
| sz = btf__resolve_size(btf, id); | |
| if (sz < 0) | |
| return sz; | |
| spec->bit_offset = access_idx * sz * 8; | |
| for (i = 1; i < spec->raw_len; i++) { | |
| t = skip_mods_and_typedefs(btf, id, &id); | |
| if (!t) | |
| return -EINVAL; | |
| access_idx = spec->raw_spec[i]; | |
| acc = &spec->spec[spec->len]; | |
| if (btf_is_composite(t)) { | |
| const struct btf_member *m; | |
| __u32 bit_offset; | |
| if (access_idx >= btf_vlen(t)) | |
| return -EINVAL; | |
| bit_offset = btf_member_bit_offset(t, access_idx); | |
| spec->bit_offset += bit_offset; | |
| m = btf_members(t) + access_idx; | |
| if (m->name_off) { | |
| name = btf__name_by_offset(btf, m->name_off); | |
| if (str_is_empty(name)) | |
| return -EINVAL; | |
| acc->type_id = id; | |
| acc->idx = access_idx; | |
| acc->name = name; | |
| spec->len++; | |
| } | |
| id = m->type; | |
| } else if (btf_is_array(t)) { | |
| const struct btf_array *a = btf_array(t); | |
| bool flex; | |
| t = skip_mods_and_typedefs(btf, a->type, &id); | |
| if (!t) | |
| return -EINVAL; | |
| flex = is_flex_arr(btf, acc - 1, a); | |
| if (!flex && access_idx >= a->nelems) | |
| return -EINVAL; | |
| spec->spec[spec->len].type_id = id; | |
| spec->spec[spec->len].idx = access_idx; | |
| spec->len++; | |
| sz = btf__resolve_size(btf, id); | |
| if (sz < 0) | |
| return sz; | |
| spec->bit_offset += access_idx * sz * 8; | |
| } else { | |
| pr_warn("prog '%s': relo for [%u] %s (at idx %d) captures type [%d] of unexpected kind %s\n", | |
| prog_name, relo->type_id, spec_str, i, id, btf_kind_str(t)); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* Check two types for compatibility for the purpose of field access | |
| * relocation. const/volatile/restrict and typedefs are skipped to ensure we | |
| * are relocating semantically compatible entities: | |
| * - any two STRUCTs/UNIONs are compatible and can be mixed; | |
| * - any two FWDs are compatible, if their names match (modulo flavor suffix); | |
| * - any two PTRs are always compatible; | |
| * - for ENUMs, names should be the same (ignoring flavor suffix) or at | |
| * least one of enums should be anonymous; | |
| * - for ENUMs, check sizes, names are ignored; | |
| * - for INT, size and signedness are ignored; | |
| * - any two FLOATs are always compatible; | |
| * - for ARRAY, dimensionality is ignored, element types are checked for | |
| * compatibility recursively; | |
| * - everything else shouldn't be ever a target of relocation. | |
| * These rules are not set in stone and probably will be adjusted as we get | |
| * more experience with using BPF CO-RE relocations. | |
| */ | |
| static int bpf_core_fields_are_compat(const struct btf *local_btf, | |
| __u32 local_id, | |
| const struct btf *targ_btf, | |
| __u32 targ_id) | |
| { | |
| const struct btf_type *local_type, *targ_type; | |
| recur: | |
| local_type = skip_mods_and_typedefs(local_btf, local_id, &local_id); | |
| targ_type = skip_mods_and_typedefs(targ_btf, targ_id, &targ_id); | |
| if (!local_type || !targ_type) | |
| return -EINVAL; | |
| if (btf_is_composite(local_type) && btf_is_composite(targ_type)) | |
| return 1; | |
| if (!btf_kind_core_compat(local_type, targ_type)) | |
| return 0; | |
| switch (btf_kind(local_type)) { | |
| case BTF_KIND_PTR: | |
| case BTF_KIND_FLOAT: | |
| return 1; | |
| case BTF_KIND_FWD: | |
| case BTF_KIND_ENUM64: | |
| case BTF_KIND_ENUM: { | |
| const char *local_name, *targ_name; | |
| size_t local_len, targ_len; | |
| local_name = btf__name_by_offset(local_btf, | |
| local_type->name_off); | |
| targ_name = btf__name_by_offset(targ_btf, targ_type->name_off); | |
| local_len = bpf_core_essential_name_len(local_name); | |
| targ_len = bpf_core_essential_name_len(targ_name); | |
| /* one of them is anonymous or both w/ same flavor-less names */ | |
| return local_len == 0 || targ_len == 0 || | |
| (local_len == targ_len && | |
| strncmp(local_name, targ_name, local_len) == 0); | |
| } | |
| case BTF_KIND_INT: | |
| /* just reject deprecated bitfield-like integers; all other | |
| * integers are by default compatible between each other | |
| */ | |
| return btf_int_offset(local_type) == 0 && | |
| btf_int_offset(targ_type) == 0; | |
| case BTF_KIND_ARRAY: | |
| local_id = btf_array(local_type)->type; | |
| targ_id = btf_array(targ_type)->type; | |
| goto recur; | |
| default: | |
| return 0; | |
| } | |
| } | |
| /* | |
| * Given single high-level named field accessor in local type, find | |
| * corresponding high-level accessor for a target type. Along the way, | |
| * maintain low-level spec for target as well. Also keep updating target | |
| * bit offset. | |
| * | |
| * Searching is performed through recursive exhaustive enumeration of all | |
| * fields of a struct/union. If there are any anonymous (embedded) | |
| * structs/unions, they are recursively searched as well. If field with | |
| * desired name is found, check compatibility between local and target types, | |
| * before returning result. | |
| * | |
| * 1 is returned, if field is found. | |
| * 0 is returned if no compatible field is found. | |
| * <0 is returned on error. | |
| */ | |
| static int bpf_core_match_member(const struct btf *local_btf, | |
| const struct bpf_core_accessor *local_acc, | |
| const struct btf *targ_btf, | |
| __u32 targ_id, | |
| struct bpf_core_spec *spec, | |
| __u32 *next_targ_id) | |
| { | |
| const struct btf_type *local_type, *targ_type; | |
| const struct btf_member *local_member, *m; | |
| const char *local_name, *targ_name; | |
| __u32 local_id; | |
| int i, n, found; | |
| targ_type = skip_mods_and_typedefs(targ_btf, targ_id, &targ_id); | |
| if (!targ_type) | |
| return -EINVAL; | |
| if (!btf_is_composite(targ_type)) | |
| return 0; | |
| local_id = local_acc->type_id; | |
| local_type = btf_type_by_id(local_btf, local_id); | |
| local_member = btf_members(local_type) + local_acc->idx; | |
| local_name = btf__name_by_offset(local_btf, local_member->name_off); | |
| n = btf_vlen(targ_type); | |
| m = btf_members(targ_type); | |
| for (i = 0; i < n; i++, m++) { | |
| __u32 bit_offset; | |
| bit_offset = btf_member_bit_offset(targ_type, i); | |
| /* too deep struct/union/array nesting */ | |
| if (spec->raw_len == BPF_CORE_SPEC_MAX_LEN) | |
| return -E2BIG; | |
| /* speculate this member will be the good one */ | |
| spec->bit_offset += bit_offset; | |
| spec->raw_spec[spec->raw_len++] = i; | |
| targ_name = btf__name_by_offset(targ_btf, m->name_off); | |
| if (str_is_empty(targ_name)) { | |
| /* embedded struct/union, we need to go deeper */ | |
| found = bpf_core_match_member(local_btf, local_acc, | |
| targ_btf, m->type, | |
| spec, next_targ_id); | |
| if (found) /* either found or error */ | |
| return found; | |
| } else if (strcmp(local_name, targ_name) == 0) { | |
| /* matching named field */ | |
| struct bpf_core_accessor *targ_acc; | |
| targ_acc = &spec->spec[spec->len++]; | |
| targ_acc->type_id = targ_id; | |
| targ_acc->idx = i; | |
| targ_acc->name = targ_name; | |
| *next_targ_id = m->type; | |
| found = bpf_core_fields_are_compat(local_btf, | |
| local_member->type, | |
| targ_btf, m->type); | |
| if (!found) | |
| spec->len--; /* pop accessor */ | |
| return found; | |
| } | |
| /* member turned out not to be what we looked for */ | |
| spec->bit_offset -= bit_offset; | |
| spec->raw_len--; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Try to match local spec to a target type and, if successful, produce full | |
| * target spec (high-level, low-level + bit offset). | |
| */ | |
| static int bpf_core_spec_match(struct bpf_core_spec *local_spec, | |
| const struct btf *targ_btf, __u32 targ_id, | |
| struct bpf_core_spec *targ_spec) | |
| { | |
| const struct btf_type *targ_type; | |
| const struct bpf_core_accessor *local_acc; | |
| struct bpf_core_accessor *targ_acc; | |
| int i, sz, matched; | |
| __u32 name_off; | |
| memset(targ_spec, 0, sizeof(*targ_spec)); | |
| targ_spec->btf = targ_btf; | |
| targ_spec->root_type_id = targ_id; | |
| targ_spec->relo_kind = local_spec->relo_kind; | |
| if (core_relo_is_type_based(local_spec->relo_kind)) { | |
| if (local_spec->relo_kind == BPF_CORE_TYPE_MATCHES) | |
| return bpf_core_types_match(local_spec->btf, | |
| local_spec->root_type_id, | |
| targ_btf, targ_id); | |
| else | |
| return bpf_core_types_are_compat(local_spec->btf, | |
| local_spec->root_type_id, | |
| targ_btf, targ_id); | |
| } | |
| local_acc = &local_spec->spec[0]; | |
| targ_acc = &targ_spec->spec[0]; | |
| if (core_relo_is_enumval_based(local_spec->relo_kind)) { | |
| size_t local_essent_len, targ_essent_len; | |
| const char *targ_name; | |
| /* has to resolve to an enum */ | |
| targ_type = skip_mods_and_typedefs(targ_spec->btf, targ_id, &targ_id); | |
| if (!btf_is_any_enum(targ_type)) | |
| return 0; | |
| local_essent_len = bpf_core_essential_name_len(local_acc->name); | |
| for (i = 0; i < btf_vlen(targ_type); i++) { | |
| if (btf_is_enum(targ_type)) | |
| name_off = btf_enum(targ_type)[i].name_off; | |
| else | |
| name_off = btf_enum64(targ_type)[i].name_off; | |
| targ_name = btf__name_by_offset(targ_spec->btf, name_off); | |
| targ_essent_len = bpf_core_essential_name_len(targ_name); | |
| if (targ_essent_len != local_essent_len) | |
| continue; | |
| if (strncmp(local_acc->name, targ_name, local_essent_len) == 0) { | |
| targ_acc->type_id = targ_id; | |
| targ_acc->idx = i; | |
| targ_acc->name = targ_name; | |
| targ_spec->len++; | |
| targ_spec->raw_spec[targ_spec->raw_len] = targ_acc->idx; | |
| targ_spec->raw_len++; | |
| return 1; | |
| } | |
| } | |
| return 0; | |
| } | |
| if (!core_relo_is_field_based(local_spec->relo_kind)) | |
| return -EINVAL; | |
| for (i = 0; i < local_spec->len; i++, local_acc++, targ_acc++) { | |
| targ_type = skip_mods_and_typedefs(targ_spec->btf, targ_id, | |
| &targ_id); | |
| if (!targ_type) | |
| return -EINVAL; | |
| if (local_acc->name) { | |
| matched = bpf_core_match_member(local_spec->btf, | |
| local_acc, | |
| targ_btf, targ_id, | |
| targ_spec, &targ_id); | |
| if (matched <= 0) | |
| return matched; | |
| } else { | |
| /* for i=0, targ_id is already treated as array element | |
| * type (because it's the original struct), for others | |
| * we should find array element type first | |
| */ | |
| if (i > 0) { | |
| const struct btf_array *a; | |
| bool flex; | |
| if (!btf_is_array(targ_type)) | |
| return 0; | |
| a = btf_array(targ_type); | |
| flex = is_flex_arr(targ_btf, targ_acc - 1, a); | |
| if (!flex && local_acc->idx >= a->nelems) | |
| return 0; | |
| if (!skip_mods_and_typedefs(targ_btf, a->type, | |
| &targ_id)) | |
| return -EINVAL; | |
| } | |
| /* too deep struct/union/array nesting */ | |
| if (targ_spec->raw_len == BPF_CORE_SPEC_MAX_LEN) | |
| return -E2BIG; | |
| targ_acc->type_id = targ_id; | |
| targ_acc->idx = local_acc->idx; | |
| targ_acc->name = NULL; | |
| targ_spec->len++; | |
| targ_spec->raw_spec[targ_spec->raw_len] = targ_acc->idx; | |
| targ_spec->raw_len++; | |
| sz = btf__resolve_size(targ_btf, targ_id); | |
| if (sz < 0) | |
| return sz; | |
| targ_spec->bit_offset += local_acc->idx * sz * 8; | |
| } | |
| } | |
| return 1; | |
| } | |
| static int bpf_core_calc_field_relo(const char *prog_name, | |
| const struct bpf_core_relo *relo, | |
| const struct bpf_core_spec *spec, | |
| __u64 *val, __u32 *field_sz, __u32 *type_id, | |
| bool *validate) | |
| { | |
| const struct bpf_core_accessor *acc; | |
| const struct btf_type *t; | |
| __u32 byte_off, byte_sz, bit_off, bit_sz, field_type_id; | |
| const struct btf_member *m; | |
| const struct btf_type *mt; | |
| bool bitfield; | |
| __s64 sz; | |
| *field_sz = 0; | |
| if (relo->kind == BPF_CORE_FIELD_EXISTS) { | |
| *val = spec ? 1 : 0; | |
| return 0; | |
| } | |
| if (!spec) | |
| return -EUCLEAN; /* request instruction poisoning */ | |
| acc = &spec->spec[spec->len - 1]; | |
| t = btf_type_by_id(spec->btf, acc->type_id); | |
| /* a[n] accessor needs special handling */ | |
| if (!acc->name) { | |
| if (relo->kind == BPF_CORE_FIELD_BYTE_OFFSET) { | |
| *val = spec->bit_offset / 8; | |
| /* remember field size for load/store mem size */ | |
| sz = btf__resolve_size(spec->btf, acc->type_id); | |
| if (sz < 0) | |
| return -EINVAL; | |
| *field_sz = sz; | |
| *type_id = acc->type_id; | |
| } else if (relo->kind == BPF_CORE_FIELD_BYTE_SIZE) { | |
| sz = btf__resolve_size(spec->btf, acc->type_id); | |
| if (sz < 0) | |
| return -EINVAL; | |
| *val = sz; | |
| } else { | |
| pr_warn("prog '%s': relo %d at insn #%d can't be applied to array access\n", | |
| prog_name, relo->kind, relo->insn_off / 8); | |
| return -EINVAL; | |
| } | |
| if (validate) | |
| *validate = true; | |
| return 0; | |
| } | |
| m = btf_members(t) + acc->idx; | |
| mt = skip_mods_and_typedefs(spec->btf, m->type, &field_type_id); | |
| bit_off = spec->bit_offset; | |
| bit_sz = btf_member_bitfield_size(t, acc->idx); | |
| bitfield = bit_sz > 0; | |
| if (bitfield) { | |
| byte_sz = mt->size; | |
| byte_off = bit_off / 8 / byte_sz * byte_sz; | |
| /* figure out smallest int size necessary for bitfield load */ | |
| while (bit_off + bit_sz - byte_off * 8 > byte_sz * 8) { | |
| if (byte_sz >= 8) { | |
| /* bitfield can't be read with 64-bit read */ | |
| pr_warn("prog '%s': relo %d at insn #%d can't be satisfied for bitfield\n", | |
| prog_name, relo->kind, relo->insn_off / 8); | |
| return -E2BIG; | |
| } | |
| byte_sz *= 2; | |
| byte_off = bit_off / 8 / byte_sz * byte_sz; | |
| } | |
| } else { | |
| sz = btf__resolve_size(spec->btf, field_type_id); | |
| if (sz < 0) | |
| return -EINVAL; | |
| byte_sz = sz; | |
| byte_off = spec->bit_offset / 8; | |
| bit_sz = byte_sz * 8; | |
| } | |
| /* for bitfields, all the relocatable aspects are ambiguous and we | |
| * might disagree with compiler, so turn off validation of expected | |
| * value, except for signedness | |
| */ | |
| if (validate) | |
| *validate = !bitfield; | |
| switch (relo->kind) { | |
| case BPF_CORE_FIELD_BYTE_OFFSET: | |
| *val = byte_off; | |
| if (!bitfield) { | |
| *field_sz = byte_sz; | |
| *type_id = field_type_id; | |
| } | |
| break; | |
| case BPF_CORE_FIELD_BYTE_SIZE: | |
| *val = byte_sz; | |
| break; | |
| case BPF_CORE_FIELD_SIGNED: | |
| *val = (btf_is_any_enum(mt) && BTF_INFO_KFLAG(mt->info)) || | |
| (btf_is_int(mt) && (btf_int_encoding(mt) & BTF_INT_SIGNED)); | |
| if (validate) | |
| *validate = true; /* signedness is never ambiguous */ | |
| break; | |
| case BPF_CORE_FIELD_LSHIFT_U64: | |
| #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ | |
| *val = 64 - (bit_off + bit_sz - byte_off * 8); | |
| #else | |
| *val = (8 - byte_sz) * 8 + (bit_off - byte_off * 8); | |
| #endif | |
| break; | |
| case BPF_CORE_FIELD_RSHIFT_U64: | |
| *val = 64 - bit_sz; | |
| if (validate) | |
| *validate = true; /* right shift is never ambiguous */ | |
| break; | |
| case BPF_CORE_FIELD_EXISTS: | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int bpf_core_calc_type_relo(const struct bpf_core_relo *relo, | |
| const struct bpf_core_spec *spec, | |
| __u64 *val, bool *validate) | |
| { | |
| __s64 sz; | |
| /* by default, always check expected value in bpf_insn */ | |
| if (validate) | |
| *validate = true; | |
| /* type-based relos return zero when target type is not found */ | |
| if (!spec) { | |
| *val = 0; | |
| return 0; | |
| } | |
| switch (relo->kind) { | |
| case BPF_CORE_TYPE_ID_TARGET: | |
| *val = spec->root_type_id; | |
| /* type ID, embedded in bpf_insn, might change during linking, | |
| * so enforcing it is pointless | |
| */ | |
| if (validate) | |
| *validate = false; | |
| break; | |
| case BPF_CORE_TYPE_EXISTS: | |
| case BPF_CORE_TYPE_MATCHES: | |
| *val = 1; | |
| break; | |
| case BPF_CORE_TYPE_SIZE: | |
| sz = btf__resolve_size(spec->btf, spec->root_type_id); | |
| if (sz < 0) | |
| return -EINVAL; | |
| *val = sz; | |
| break; | |
| case BPF_CORE_TYPE_ID_LOCAL: | |
| /* BPF_CORE_TYPE_ID_LOCAL is handled specially and shouldn't get here */ | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int bpf_core_calc_enumval_relo(const struct bpf_core_relo *relo, | |
| const struct bpf_core_spec *spec, | |
| __u64 *val) | |
| { | |
| const struct btf_type *t; | |
| switch (relo->kind) { | |
| case BPF_CORE_ENUMVAL_EXISTS: | |
| *val = spec ? 1 : 0; | |
| break; | |
| case BPF_CORE_ENUMVAL_VALUE: | |
| if (!spec) | |
| return -EUCLEAN; /* request instruction poisoning */ | |
| t = btf_type_by_id(spec->btf, spec->spec[0].type_id); | |
| if (btf_is_enum(t)) | |
| *val = btf_enum(t)[spec->spec[0].idx].val; | |
| else | |
| *val = btf_enum64_value(btf_enum64(t) + spec->spec[0].idx); | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| /* Calculate original and target relocation values, given local and target | |
| * specs and relocation kind. These values are calculated for each candidate. | |
| * If there are multiple candidates, resulting values should all be consistent | |
| * with each other. Otherwise, libbpf will refuse to proceed due to ambiguity. | |
| * If instruction has to be poisoned, *poison will be set to true. | |
| */ | |
| static int bpf_core_calc_relo(const char *prog_name, | |
| const struct bpf_core_relo *relo, | |
| int relo_idx, | |
| const struct bpf_core_spec *local_spec, | |
| const struct bpf_core_spec *targ_spec, | |
| struct bpf_core_relo_res *res) | |
| { | |
| int err = -EOPNOTSUPP; | |
| res->orig_val = 0; | |
| res->new_val = 0; | |
| res->poison = false; | |
| res->validate = true; | |
| res->fail_memsz_adjust = false; | |
| res->orig_sz = res->new_sz = 0; | |
| res->orig_type_id = res->new_type_id = 0; | |
| if (core_relo_is_field_based(relo->kind)) { | |
| err = bpf_core_calc_field_relo(prog_name, relo, local_spec, | |
| &res->orig_val, &res->orig_sz, | |
| &res->orig_type_id, &res->validate); | |
| err = err ?: bpf_core_calc_field_relo(prog_name, relo, targ_spec, | |
| &res->new_val, &res->new_sz, | |
| &res->new_type_id, NULL); | |
| if (err) | |
| goto done; | |
| /* Validate if it's safe to adjust load/store memory size. | |
| * Adjustments are performed only if original and new memory | |
| * sizes differ. | |
| */ | |
| res->fail_memsz_adjust = false; | |
| if (res->orig_sz != res->new_sz) { | |
| const struct btf_type *orig_t, *new_t; | |
| orig_t = btf_type_by_id(local_spec->btf, res->orig_type_id); | |
| new_t = btf_type_by_id(targ_spec->btf, res->new_type_id); | |
| /* There are two use cases in which it's safe to | |
| * adjust load/store's mem size: | |
| * - reading a 32-bit kernel pointer, while on BPF | |
| * size pointers are always 64-bit; in this case | |
| * it's safe to "downsize" instruction size due to | |
| * pointer being treated as unsigned integer with | |
| * zero-extended upper 32-bits; | |
| * - reading unsigned integers, again due to | |
| * zero-extension is preserving the value correctly. | |
| * | |
| * In all other cases it's incorrect to attempt to | |
| * load/store field because read value will be | |
| * incorrect, so we poison relocated instruction. | |
| */ | |
| if (btf_is_ptr(orig_t) && btf_is_ptr(new_t)) | |
| goto done; | |
| if (btf_is_int(orig_t) && btf_is_int(new_t) && | |
| btf_int_encoding(orig_t) != BTF_INT_SIGNED && | |
| btf_int_encoding(new_t) != BTF_INT_SIGNED) | |
| goto done; | |
| /* mark as invalid mem size adjustment, but this will | |
| * only be checked for LDX/STX/ST insns | |
| */ | |
| res->fail_memsz_adjust = true; | |
| } | |
| } else if (core_relo_is_type_based(relo->kind)) { | |
| err = bpf_core_calc_type_relo(relo, local_spec, &res->orig_val, &res->validate); | |
| err = err ?: bpf_core_calc_type_relo(relo, targ_spec, &res->new_val, NULL); | |
| } else if (core_relo_is_enumval_based(relo->kind)) { | |
| err = bpf_core_calc_enumval_relo(relo, local_spec, &res->orig_val); | |
| err = err ?: bpf_core_calc_enumval_relo(relo, targ_spec, &res->new_val); | |
| } | |
| done: | |
| if (err == -EUCLEAN) { | |
| /* EUCLEAN is used to signal instruction poisoning request */ | |
| res->poison = true; | |
| err = 0; | |
| } else if (err == -EOPNOTSUPP) { | |
| /* EOPNOTSUPP means unknown/unsupported relocation */ | |
| pr_warn("prog '%s': relo #%d: unrecognized CO-RE relocation %s (%d) at insn #%d\n", | |
| prog_name, relo_idx, core_relo_kind_str(relo->kind), | |
| relo->kind, relo->insn_off / 8); | |
| } | |
| return err; | |
| } | |
| /* | |
| * Turn instruction for which CO_RE relocation failed into invalid one with | |
| * distinct signature. | |
| */ | |
| static void bpf_core_poison_insn(const char *prog_name, int relo_idx, | |
| int insn_idx, struct bpf_insn *insn) | |
| { | |
| pr_debug("prog '%s': relo #%d: substituting insn #%d w/ invalid insn\n", | |
| prog_name, relo_idx, insn_idx); | |
| insn->code = BPF_JMP | BPF_CALL; | |
| insn->dst_reg = 0; | |
| insn->src_reg = 0; | |
| insn->off = 0; | |
| /* if this instruction is reachable (not a dead code), | |
| * verifier will complain with the following message: | |
| * invalid func unknown#195896080 | |
| */ | |
| insn->imm = 195896080; /* => 0xbad2310 => "bad relo" */ | |
| } | |
| static int insn_bpf_size_to_bytes(struct bpf_insn *insn) | |
| { | |
| switch (BPF_SIZE(insn->code)) { | |
| case BPF_DW: return 8; | |
| case BPF_W: return 4; | |
| case BPF_H: return 2; | |
| case BPF_B: return 1; | |
| default: return -1; | |
| } | |
| } | |
| static int insn_bytes_to_bpf_size(__u32 sz) | |
| { | |
| switch (sz) { | |
| case 8: return BPF_DW; | |
| case 4: return BPF_W; | |
| case 2: return BPF_H; | |
| case 1: return BPF_B; | |
| default: return -1; | |
| } | |
| } | |
| /* | |
| * Patch relocatable BPF instruction. | |
| * | |
| * Patched value is determined by relocation kind and target specification. | |
| * For existence relocations target spec will be NULL if field/type is not found. | |
| * Expected insn->imm value is determined using relocation kind and local | |
| * spec, and is checked before patching instruction. If actual insn->imm value | |
| * is wrong, bail out with error. | |
| * | |
| * Currently supported classes of BPF instruction are: | |
| * 1. rX = <imm> (assignment with immediate operand); | |
| * 2. rX += <imm> (arithmetic operations with immediate operand); | |
| * 3. rX = <imm64> (load with 64-bit immediate value); | |
| * 4. rX = *(T *)(rY + <off>), where T is one of {u8, u16, u32, u64}; | |
| * 5. *(T *)(rX + <off>) = rY, where T is one of {u8, u16, u32, u64}; | |
| * 6. *(T *)(rX + <off>) = <imm>, where T is one of {u8, u16, u32, u64}. | |
| */ | |
| int bpf_core_patch_insn(const char *prog_name, struct bpf_insn *insn, | |
| int insn_idx, const struct bpf_core_relo *relo, | |
| int relo_idx, const struct bpf_core_relo_res *res) | |
| { | |
| __u64 orig_val, new_val; | |
| __u8 class; | |
| class = BPF_CLASS(insn->code); | |
| if (res->poison) { | |
| poison: | |
| /* poison second part of ldimm64 to avoid confusing error from | |
| * verifier about "unknown opcode 00" | |
| */ | |
| if (is_ldimm64_insn(insn)) | |
| bpf_core_poison_insn(prog_name, relo_idx, insn_idx + 1, insn + 1); | |
| bpf_core_poison_insn(prog_name, relo_idx, insn_idx, insn); | |
| return 0; | |
| } | |
| orig_val = res->orig_val; | |
| new_val = res->new_val; | |
| switch (class) { | |
| case BPF_ALU: | |
| case BPF_ALU64: | |
| if (BPF_SRC(insn->code) != BPF_K) | |
| return -EINVAL; | |
| if (res->validate && insn->imm != orig_val) { | |
| pr_warn("prog '%s': relo #%d: unexpected insn #%d (ALU/ALU64) value: got %u, exp %llu -> %llu\n", | |
| prog_name, relo_idx, | |
| insn_idx, insn->imm, (unsigned long long)orig_val, | |
| (unsigned long long)new_val); | |
| return -EINVAL; | |
| } | |
| orig_val = insn->imm; | |
| insn->imm = new_val; | |
| pr_debug("prog '%s': relo #%d: patched insn #%d (ALU/ALU64) imm %llu -> %llu\n", | |
| prog_name, relo_idx, insn_idx, | |
| (unsigned long long)orig_val, (unsigned long long)new_val); | |
| break; | |
| case BPF_LDX: | |
| case BPF_ST: | |
| case BPF_STX: | |
| if (res->validate && insn->off != orig_val) { | |
| pr_warn("prog '%s': relo #%d: unexpected insn #%d (LDX/ST/STX) value: got %u, exp %llu -> %llu\n", | |
| prog_name, relo_idx, insn_idx, insn->off, (unsigned long long)orig_val, | |
| (unsigned long long)new_val); | |
| return -EINVAL; | |
| } | |
| if (new_val > SHRT_MAX) { | |
| pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) value too big: %llu\n", | |
| prog_name, relo_idx, insn_idx, (unsigned long long)new_val); | |
| return -ERANGE; | |
| } | |
| if (res->fail_memsz_adjust) { | |
| pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) accesses field incorrectly. " | |
| "Make sure you are accessing pointers, unsigned integers, or fields of matching type and size.\n", | |
| prog_name, relo_idx, insn_idx); | |
| goto poison; | |
| } | |
| orig_val = insn->off; | |
| insn->off = new_val; | |
| pr_debug("prog '%s': relo #%d: patched insn #%d (LDX/ST/STX) off %llu -> %llu\n", | |
| prog_name, relo_idx, insn_idx, (unsigned long long)orig_val, | |
| (unsigned long long)new_val); | |
| if (res->new_sz != res->orig_sz) { | |
| int insn_bytes_sz, insn_bpf_sz; | |
| insn_bytes_sz = insn_bpf_size_to_bytes(insn); | |
| if (insn_bytes_sz != res->orig_sz) { | |
| pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) unexpected mem size: got %d, exp %u\n", | |
| prog_name, relo_idx, insn_idx, insn_bytes_sz, res->orig_sz); | |
| return -EINVAL; | |
| } | |
| insn_bpf_sz = insn_bytes_to_bpf_size(res->new_sz); | |
| if (insn_bpf_sz < 0) { | |
| pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) invalid new mem size: %u\n", | |
| prog_name, relo_idx, insn_idx, res->new_sz); | |
| return -EINVAL; | |
| } | |
| insn->code = BPF_MODE(insn->code) | insn_bpf_sz | BPF_CLASS(insn->code); | |
| pr_debug("prog '%s': relo #%d: patched insn #%d (LDX/ST/STX) mem_sz %u -> %u\n", | |
| prog_name, relo_idx, insn_idx, res->orig_sz, res->new_sz); | |
| } | |
| break; | |
| case BPF_LD: { | |
| __u64 imm; | |
| if (!is_ldimm64_insn(insn) || | |
| insn[0].src_reg != 0 || insn[0].off != 0 || | |
| insn[1].code != 0 || insn[1].dst_reg != 0 || | |
| insn[1].src_reg != 0 || insn[1].off != 0) { | |
| pr_warn("prog '%s': relo #%d: insn #%d (LDIMM64) has unexpected form\n", | |
| prog_name, relo_idx, insn_idx); | |
| return -EINVAL; | |
| } | |
| imm = (__u32)insn[0].imm | ((__u64)insn[1].imm << 32); | |
| if (res->validate && imm != orig_val) { | |
| pr_warn("prog '%s': relo #%d: unexpected insn #%d (LDIMM64) value: got %llu, exp %llu -> %llu\n", | |
| prog_name, relo_idx, | |
| insn_idx, (unsigned long long)imm, | |
| (unsigned long long)orig_val, (unsigned long long)new_val); | |
| return -EINVAL; | |
| } | |
| insn[0].imm = new_val; | |
| insn[1].imm = new_val >> 32; | |
| pr_debug("prog '%s': relo #%d: patched insn #%d (LDIMM64) imm64 %llu -> %llu\n", | |
| prog_name, relo_idx, insn_idx, | |
| (unsigned long long)imm, (unsigned long long)new_val); | |
| break; | |
| } | |
| default: | |
| pr_warn("prog '%s': relo #%d: trying to relocate unrecognized insn #%d, code:0x%x, src:0x%x, dst:0x%x, off:0x%x, imm:0x%x\n", | |
| prog_name, relo_idx, insn_idx, insn->code, | |
| insn->src_reg, insn->dst_reg, insn->off, insn->imm); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* Output spec definition in the format: | |
| * [<type-id>] (<type-name>) + <raw-spec> => <offset>@<spec>, | |
| * where <spec> is a C-syntax view of recorded field access, e.g.: x.a[3].b | |
| */ | |
| int bpf_core_format_spec(char *buf, size_t buf_sz, const struct bpf_core_spec *spec) | |
| { | |
| const struct btf_type *t; | |
| const char *s; | |
| __u32 type_id; | |
| int i, len = 0; | |
| #define append_buf(fmt, args...) \ | |
| ({ \ | |
| int r; \ | |
| r = snprintf(buf, buf_sz, fmt, ##args); \ | |
| len += r; \ | |
| if (r >= buf_sz) \ | |
| r = buf_sz; \ | |
| buf += r; \ | |
| buf_sz -= r; \ | |
| }) | |
| type_id = spec->root_type_id; | |
| t = btf_type_by_id(spec->btf, type_id); | |
| s = btf__name_by_offset(spec->btf, t->name_off); | |
| append_buf("<%s> [%u] %s %s", | |
| core_relo_kind_str(spec->relo_kind), | |
| type_id, btf_kind_str(t), str_is_empty(s) ? "<anon>" : s); | |
| if (core_relo_is_type_based(spec->relo_kind)) | |
| return len; | |
| if (core_relo_is_enumval_based(spec->relo_kind)) { | |
| t = skip_mods_and_typedefs(spec->btf, type_id, NULL); | |
| if (btf_is_enum(t)) { | |
| const struct btf_enum *e; | |
| const char *fmt_str; | |
| e = btf_enum(t) + spec->raw_spec[0]; | |
| s = btf__name_by_offset(spec->btf, e->name_off); | |
| fmt_str = BTF_INFO_KFLAG(t->info) ? "::%s = %d" : "::%s = %u"; | |
| append_buf(fmt_str, s, e->val); | |
| } else { | |
| const struct btf_enum64 *e; | |
| const char *fmt_str; | |
| e = btf_enum64(t) + spec->raw_spec[0]; | |
| s = btf__name_by_offset(spec->btf, e->name_off); | |
| fmt_str = BTF_INFO_KFLAG(t->info) ? "::%s = %lld" : "::%s = %llu"; | |
| append_buf(fmt_str, s, (unsigned long long)btf_enum64_value(e)); | |
| } | |
| return len; | |
| } | |
| if (core_relo_is_field_based(spec->relo_kind)) { | |
| for (i = 0; i < spec->len; i++) { | |
| if (spec->spec[i].name) | |
| append_buf(".%s", spec->spec[i].name); | |
| else if (i > 0 || spec->spec[i].idx > 0) | |
| append_buf("[%u]", spec->spec[i].idx); | |
| } | |
| append_buf(" ("); | |
| for (i = 0; i < spec->raw_len; i++) | |
| append_buf("%s%d", i == 0 ? "" : ":", spec->raw_spec[i]); | |
| if (spec->bit_offset % 8) | |
| append_buf(" @ offset %u.%u)", spec->bit_offset / 8, spec->bit_offset % 8); | |
| else | |
| append_buf(" @ offset %u)", spec->bit_offset / 8); | |
| return len; | |
| } | |
| return len; | |
| #undef append_buf | |
| } | |
| /* | |
| * Calculate CO-RE relocation target result. | |
| * | |
| * The outline and important points of the algorithm: | |
| * 1. For given local type, find corresponding candidate target types. | |
| * Candidate type is a type with the same "essential" name, ignoring | |
| * everything after last triple underscore (___). E.g., `sample`, | |
| * `sample___flavor_one`, `sample___flavor_another_one`, are all candidates | |
| * for each other. Names with triple underscore are referred to as | |
| * "flavors" and are useful, among other things, to allow to | |
| * specify/support incompatible variations of the same kernel struct, which | |
| * might differ between different kernel versions and/or build | |
| * configurations. | |
| * | |
| * N.B. Struct "flavors" could be generated by bpftool's BTF-to-C | |
| * converter, when deduplicated BTF of a kernel still contains more than | |
| * one different types with the same name. In that case, ___2, ___3, etc | |
| * are appended starting from second name conflict. But start flavors are | |
| * also useful to be defined "locally", in BPF program, to extract same | |
| * data from incompatible changes between different kernel | |
| * versions/configurations. For instance, to handle field renames between | |
| * kernel versions, one can use two flavors of the struct name with the | |
| * same common name and use conditional relocations to extract that field, | |
| * depending on target kernel version. | |
| * 2. For each candidate type, try to match local specification to this | |
| * candidate target type. Matching involves finding corresponding | |
| * high-level spec accessors, meaning that all named fields should match, | |
| * as well as all array accesses should be within the actual bounds. Also, | |
| * types should be compatible (see bpf_core_fields_are_compat for details). | |
| * 3. It is supported and expected that there might be multiple flavors | |
| * matching the spec. As long as all the specs resolve to the same set of | |
| * offsets across all candidates, there is no error. If there is any | |
| * ambiguity, CO-RE relocation will fail. This is necessary to accommodate | |
| * imperfection of BTF deduplication, which can cause slight duplication of | |
| * the same BTF type, if some directly or indirectly referenced (by | |
| * pointer) type gets resolved to different actual types in different | |
| * object files. If such a situation occurs, deduplicated BTF will end up | |
| * with two (or more) structurally identical types, which differ only in | |
| * types they refer to through pointer. This should be OK in most cases and | |
| * is not an error. | |
| * 4. Candidate types search is performed by linearly scanning through all | |
| * types in target BTF. It is anticipated that this is overall more | |
| * efficient memory-wise and not significantly worse (if not better) | |
| * CPU-wise compared to prebuilding a map from all local type names to | |
| * a list of candidate type names. It's also sped up by caching resolved | |
| * list of matching candidates per each local "root" type ID, that has at | |
| * least one bpf_core_relo associated with it. This list is shared | |
| * between multiple relocations for the same type ID and is updated as some | |
| * of the candidates are pruned due to structural incompatibility. | |
| */ | |
| int bpf_core_calc_relo_insn(const char *prog_name, | |
| const struct bpf_core_relo *relo, | |
| int relo_idx, | |
| const struct btf *local_btf, | |
| struct bpf_core_cand_list *cands, | |
| struct bpf_core_spec *specs_scratch, | |
| struct bpf_core_relo_res *targ_res) | |
| { | |
| struct bpf_core_spec *local_spec = &specs_scratch[0]; | |
| struct bpf_core_spec *cand_spec = &specs_scratch[1]; | |
| struct bpf_core_spec *targ_spec = &specs_scratch[2]; | |
| struct bpf_core_relo_res cand_res; | |
| const struct btf_type *local_type; | |
| const char *local_name; | |
| __u32 local_id; | |
| char spec_buf[256]; | |
| int i, j, err; | |
| local_id = relo->type_id; | |
| local_type = btf_type_by_id(local_btf, local_id); | |
| local_name = btf__name_by_offset(local_btf, local_type->name_off); | |
| if (!local_name) | |
| return -EINVAL; | |
| err = bpf_core_parse_spec(prog_name, local_btf, relo, local_spec); | |
| if (err) { | |
| const char *spec_str; | |
| spec_str = btf__name_by_offset(local_btf, relo->access_str_off); | |
| pr_warn("prog '%s': relo #%d: parsing [%d] %s %s + %s failed: %d\n", | |
| prog_name, relo_idx, local_id, btf_kind_str(local_type), | |
| str_is_empty(local_name) ? "<anon>" : local_name, | |
| spec_str ?: "<?>", err); | |
| return -EINVAL; | |
| } | |
| bpf_core_format_spec(spec_buf, sizeof(spec_buf), local_spec); | |
| pr_debug("prog '%s': relo #%d: %s\n", prog_name, relo_idx, spec_buf); | |
| /* TYPE_ID_LOCAL relo is special and doesn't need candidate search */ | |
| if (relo->kind == BPF_CORE_TYPE_ID_LOCAL) { | |
| /* bpf_insn's imm value could get out of sync during linking */ | |
| memset(targ_res, 0, sizeof(*targ_res)); | |
| targ_res->validate = false; | |
| targ_res->poison = false; | |
| targ_res->orig_val = local_spec->root_type_id; | |
| targ_res->new_val = local_spec->root_type_id; | |
| return 0; | |
| } | |
| /* libbpf doesn't support candidate search for anonymous types */ | |
| if (str_is_empty(local_name)) { | |
| pr_warn("prog '%s': relo #%d: <%s> (%d) relocation doesn't support anonymous types\n", | |
| prog_name, relo_idx, core_relo_kind_str(relo->kind), relo->kind); | |
| return -EOPNOTSUPP; | |
| } | |
| for (i = 0, j = 0; i < cands->len; i++) { | |
| err = bpf_core_spec_match(local_spec, cands->cands[i].btf, | |
| cands->cands[i].id, cand_spec); | |
| if (err < 0) { | |
| bpf_core_format_spec(spec_buf, sizeof(spec_buf), cand_spec); | |
| pr_warn("prog '%s': relo #%d: error matching candidate #%d %s: %d\n", | |
| prog_name, relo_idx, i, spec_buf, err); | |
| return err; | |
| } | |
| bpf_core_format_spec(spec_buf, sizeof(spec_buf), cand_spec); | |
| pr_debug("prog '%s': relo #%d: %s candidate #%d %s\n", prog_name, | |
| relo_idx, err == 0 ? "non-matching" : "matching", i, spec_buf); | |
| if (err == 0) | |
| continue; | |
| err = bpf_core_calc_relo(prog_name, relo, relo_idx, local_spec, cand_spec, &cand_res); | |
| if (err) | |
| return err; | |
| if (j == 0) { | |
| *targ_res = cand_res; | |
| *targ_spec = *cand_spec; | |
| } else if (cand_spec->bit_offset != targ_spec->bit_offset) { | |
| /* if there are many field relo candidates, they | |
| * should all resolve to the same bit offset | |
| */ | |
| pr_warn("prog '%s': relo #%d: field offset ambiguity: %u != %u\n", | |
| prog_name, relo_idx, cand_spec->bit_offset, | |
| targ_spec->bit_offset); | |
| return -EINVAL; | |
| } else if (cand_res.poison != targ_res->poison || | |
| cand_res.new_val != targ_res->new_val) { | |
| /* all candidates should result in the same relocation | |
| * decision and value, otherwise it's dangerous to | |
| * proceed due to ambiguity | |
| */ | |
| pr_warn("prog '%s': relo #%d: relocation decision ambiguity: %s %llu != %s %llu\n", | |
| prog_name, relo_idx, | |
| cand_res.poison ? "failure" : "success", | |
| (unsigned long long)cand_res.new_val, | |
| targ_res->poison ? "failure" : "success", | |
| (unsigned long long)targ_res->new_val); | |
| return -EINVAL; | |
| } | |
| cands->cands[j++] = cands->cands[i]; | |
| } | |
| /* | |
| * For BPF_CORE_FIELD_EXISTS relo or when used BPF program has field | |
| * existence checks or kernel version/config checks, it's expected | |
| * that we might not find any candidates. In this case, if field | |
| * wasn't found in any candidate, the list of candidates shouldn't | |
| * change at all, we'll just handle relocating appropriately, | |
| * depending on relo's kind. | |
| */ | |
| if (j > 0) | |
| cands->len = j; | |
| /* | |
| * If no candidates were found, it might be both a programmer error, | |
| * as well as expected case, depending whether instruction w/ | |
| * relocation is guarded in some way that makes it unreachable (dead | |
| * code) if relocation can't be resolved. This is handled in | |
| * bpf_core_patch_insn() uniformly by replacing that instruction with | |
| * BPF helper call insn (using invalid helper ID). If that instruction | |
| * is indeed unreachable, then it will be ignored and eliminated by | |
| * verifier. If it was an error, then verifier will complain and point | |
| * to a specific instruction number in its log. | |
| */ | |
| if (j == 0) { | |
| pr_debug("prog '%s': relo #%d: no matching targets found\n", | |
| prog_name, relo_idx); | |
| /* calculate single target relo result explicitly */ | |
| err = bpf_core_calc_relo(prog_name, relo, relo_idx, local_spec, NULL, targ_res); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static bool bpf_core_names_match(const struct btf *local_btf, size_t local_name_off, | |
| const struct btf *targ_btf, size_t targ_name_off) | |
| { | |
| const char *local_n, *targ_n; | |
| size_t local_len, targ_len; | |
| local_n = btf__name_by_offset(local_btf, local_name_off); | |
| targ_n = btf__name_by_offset(targ_btf, targ_name_off); | |
| if (str_is_empty(targ_n)) | |
| return str_is_empty(local_n); | |
| targ_len = bpf_core_essential_name_len(targ_n); | |
| local_len = bpf_core_essential_name_len(local_n); | |
| return targ_len == local_len && strncmp(local_n, targ_n, local_len) == 0; | |
| } | |
| static int bpf_core_enums_match(const struct btf *local_btf, const struct btf_type *local_t, | |
| const struct btf *targ_btf, const struct btf_type *targ_t) | |
| { | |
| __u16 local_vlen = btf_vlen(local_t); | |
| __u16 targ_vlen = btf_vlen(targ_t); | |
| int i, j; | |
| if (local_t->size != targ_t->size) | |
| return 0; | |
| if (local_vlen > targ_vlen) | |
| return 0; | |
| /* iterate over the local enum's variants and make sure each has | |
| * a symbolic name correspondent in the target | |
| */ | |
| for (i = 0; i < local_vlen; i++) { | |
| bool matched = false; | |
| __u32 local_n_off, targ_n_off; | |
| local_n_off = btf_is_enum(local_t) ? btf_enum(local_t)[i].name_off : | |
| btf_enum64(local_t)[i].name_off; | |
| for (j = 0; j < targ_vlen; j++) { | |
| targ_n_off = btf_is_enum(targ_t) ? btf_enum(targ_t)[j].name_off : | |
| btf_enum64(targ_t)[j].name_off; | |
| if (bpf_core_names_match(local_btf, local_n_off, targ_btf, targ_n_off)) { | |
| matched = true; | |
| break; | |
| } | |
| } | |
| if (!matched) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static int bpf_core_composites_match(const struct btf *local_btf, const struct btf_type *local_t, | |
| const struct btf *targ_btf, const struct btf_type *targ_t, | |
| bool behind_ptr, int level) | |
| { | |
| const struct btf_member *local_m = btf_members(local_t); | |
| __u16 local_vlen = btf_vlen(local_t); | |
| __u16 targ_vlen = btf_vlen(targ_t); | |
| int i, j, err; | |
| if (local_vlen > targ_vlen) | |
| return 0; | |
| /* check that all local members have a match in the target */ | |
| for (i = 0; i < local_vlen; i++, local_m++) { | |
| const struct btf_member *targ_m = btf_members(targ_t); | |
| bool matched = false; | |
| for (j = 0; j < targ_vlen; j++, targ_m++) { | |
| if (!bpf_core_names_match(local_btf, local_m->name_off, | |
| targ_btf, targ_m->name_off)) | |
| continue; | |
| err = __bpf_core_types_match(local_btf, local_m->type, targ_btf, | |
| targ_m->type, behind_ptr, level - 1); | |
| if (err < 0) | |
| return err; | |
| if (err > 0) { | |
| matched = true; | |
| break; | |
| } | |
| } | |
| if (!matched) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* Check that two types "match". This function assumes that root types were | |
| * already checked for name match. | |
| * | |
| * The matching relation is defined as follows: | |
| * - modifiers and typedefs are stripped (and, hence, effectively ignored) | |
| * - generally speaking types need to be of same kind (struct vs. struct, union | |
| * vs. union, etc.) | |
| * - exceptions are struct/union behind a pointer which could also match a | |
| * forward declaration of a struct or union, respectively, and enum vs. | |
| * enum64 (see below) | |
| * Then, depending on type: | |
| * - integers: | |
| * - match if size and signedness match | |
| * - arrays & pointers: | |
| * - target types are recursively matched | |
| * - structs & unions: | |
| * - local members need to exist in target with the same name | |
| * - for each member we recursively check match unless it is already behind a | |
| * pointer, in which case we only check matching names and compatible kind | |
| * - enums: | |
| * - local variants have to have a match in target by symbolic name (but not | |
| * numeric value) | |
| * - size has to match (but enum may match enum64 and vice versa) | |
| * - function pointers: | |
| * - number and position of arguments in local type has to match target | |
| * - for each argument and the return value we recursively check match | |
| */ | |
| int __bpf_core_types_match(const struct btf *local_btf, __u32 local_id, const struct btf *targ_btf, | |
| __u32 targ_id, bool behind_ptr, int level) | |
| { | |
| const struct btf_type *local_t, *targ_t; | |
| int depth = 32; /* max recursion depth */ | |
| __u16 local_k, targ_k; | |
| if (level <= 0) | |
| return -EINVAL; | |
| recur: | |
| depth--; | |
| if (depth < 0) | |
| return -EINVAL; | |
| local_t = skip_mods_and_typedefs(local_btf, local_id, &local_id); | |
| targ_t = skip_mods_and_typedefs(targ_btf, targ_id, &targ_id); | |
| if (!local_t || !targ_t) | |
| return -EINVAL; | |
| /* While the name check happens after typedefs are skipped, root-level | |
| * typedefs would still be name-matched as that's the contract with | |
| * callers. | |
| */ | |
| if (!bpf_core_names_match(local_btf, local_t->name_off, targ_btf, targ_t->name_off)) | |
| return 0; | |
| local_k = btf_kind(local_t); | |
| targ_k = btf_kind(targ_t); | |
| switch (local_k) { | |
| case BTF_KIND_UNKN: | |
| return local_k == targ_k; | |
| case BTF_KIND_FWD: { | |
| bool local_f = BTF_INFO_KFLAG(local_t->info); | |
| if (behind_ptr) { | |
| if (local_k == targ_k) | |
| return local_f == BTF_INFO_KFLAG(targ_t->info); | |
| /* for forward declarations kflag dictates whether the | |
| * target is a struct (0) or union (1) | |
| */ | |
| return (targ_k == BTF_KIND_STRUCT && !local_f) || | |
| (targ_k == BTF_KIND_UNION && local_f); | |
| } else { | |
| if (local_k != targ_k) | |
| return 0; | |
| /* match if the forward declaration is for the same kind */ | |
| return local_f == BTF_INFO_KFLAG(targ_t->info); | |
| } | |
| } | |
| case BTF_KIND_ENUM: | |
| case BTF_KIND_ENUM64: | |
| if (!btf_is_any_enum(targ_t)) | |
| return 0; | |
| return bpf_core_enums_match(local_btf, local_t, targ_btf, targ_t); | |
| case BTF_KIND_STRUCT: | |
| case BTF_KIND_UNION: | |
| if (behind_ptr) { | |
| bool targ_f = BTF_INFO_KFLAG(targ_t->info); | |
| if (local_k == targ_k) | |
| return 1; | |
| if (targ_k != BTF_KIND_FWD) | |
| return 0; | |
| return (local_k == BTF_KIND_UNION) == targ_f; | |
| } else { | |
| if (local_k != targ_k) | |
| return 0; | |
| return bpf_core_composites_match(local_btf, local_t, targ_btf, targ_t, | |
| behind_ptr, level); | |
| } | |
| case BTF_KIND_INT: { | |
| __u8 local_sgn; | |
| __u8 targ_sgn; | |
| if (local_k != targ_k) | |
| return 0; | |
| local_sgn = btf_int_encoding(local_t) & BTF_INT_SIGNED; | |
| targ_sgn = btf_int_encoding(targ_t) & BTF_INT_SIGNED; | |
| return local_t->size == targ_t->size && local_sgn == targ_sgn; | |
| } | |
| case BTF_KIND_PTR: | |
| if (local_k != targ_k) | |
| return 0; | |
| behind_ptr = true; | |
| local_id = local_t->type; | |
| targ_id = targ_t->type; | |
| goto recur; | |
| case BTF_KIND_ARRAY: { | |
| const struct btf_array *local_array = btf_array(local_t); | |
| const struct btf_array *targ_array = btf_array(targ_t); | |
| if (local_k != targ_k) | |
| return 0; | |
| if (local_array->nelems != targ_array->nelems) | |
| return 0; | |
| local_id = local_array->type; | |
| targ_id = targ_array->type; | |
| goto recur; | |
| } | |
| case BTF_KIND_FUNC_PROTO: { | |
| struct btf_param *local_p = btf_params(local_t); | |
| struct btf_param *targ_p = btf_params(targ_t); | |
| __u16 local_vlen = btf_vlen(local_t); | |
| __u16 targ_vlen = btf_vlen(targ_t); | |
| int i, err; | |
| if (local_k != targ_k) | |
| return 0; | |
| if (local_vlen != targ_vlen) | |
| return 0; | |
| for (i = 0; i < local_vlen; i++, local_p++, targ_p++) { | |
| err = __bpf_core_types_match(local_btf, local_p->type, targ_btf, | |
| targ_p->type, behind_ptr, level - 1); | |
| if (err <= 0) | |
| return err; | |
| } | |
| /* tail recurse for return type check */ | |
| local_id = local_t->type; | |
| targ_id = targ_t->type; | |
| goto recur; | |
| } | |
| default: | |
| pr_warn("unexpected kind %s relocated, local [%d], target [%d]\n", | |
| btf_kind_str(local_t), local_id, targ_id); | |
| return 0; | |
| } | |
| } |