| // SPDX-License-Identifier: GPL-2.0 |
| // nuvoton/NPCM-5.10-OpenBMC: 21b5f4c825c4b8e6349ec64dc27f918427534071 |
| // Copyright (c) 2014-2018 Nuvoton Technology corporation. |
| |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/sysfs.h> |
| #include <linux/thermal.h> |
| |
| /* NPCM7XX PWM registers */ |
| #define NPCM7XX_PWM_REG_BASE(base, n) ((base) + ((n) * 0x1000L)) |
| |
| #define NPCM7XX_PWM_REG_PR(base, n) (NPCM7XX_PWM_REG_BASE(base, n) + 0x00) |
| #define NPCM7XX_PWM_REG_CSR(base, n) (NPCM7XX_PWM_REG_BASE(base, n) + 0x04) |
| #define NPCM7XX_PWM_REG_CR(base, n) (NPCM7XX_PWM_REG_BASE(base, n) + 0x08) |
| #define NPCM7XX_PWM_REG_CNRx(base, n, ch) \ |
| (NPCM7XX_PWM_REG_BASE(base, n) + 0x0C + (12 * (ch))) |
| #define NPCM7XX_PWM_REG_CMRx(base, n, ch) \ |
| (NPCM7XX_PWM_REG_BASE(base, n) + 0x10 + (12 * (ch))) |
| #define NPCM7XX_PWM_REG_PDRx(base, n, ch) \ |
| (NPCM7XX_PWM_REG_BASE(base, n) + 0x14 + (12 * (ch))) |
| #define NPCM7XX_PWM_REG_PIER(base, n) (NPCM7XX_PWM_REG_BASE(base, n) + 0x3C) |
| #define NPCM7XX_PWM_REG_PIIR(base, n) (NPCM7XX_PWM_REG_BASE(base, n) + 0x40) |
| |
| #define NPCM7XX_PWM_CTRL_CH0_MODE_BIT BIT(3) |
| #define NPCM7XX_PWM_CTRL_CH1_MODE_BIT BIT(11) |
| #define NPCM7XX_PWM_CTRL_CH2_MODE_BIT BIT(15) |
| #define NPCM7XX_PWM_CTRL_CH3_MODE_BIT BIT(19) |
| |
| #define NPCM7XX_PWM_CTRL_CH0_INV_BIT BIT(2) |
| #define NPCM7XX_PWM_CTRL_CH1_INV_BIT BIT(10) |
| #define NPCM7XX_PWM_CTRL_CH2_INV_BIT BIT(14) |
| #define NPCM7XX_PWM_CTRL_CH3_INV_BIT BIT(18) |
| |
| #define NPCM7XX_PWM_CTRL_CH0_EN_BIT BIT(0) |
| #define NPCM7XX_PWM_CTRL_CH1_EN_BIT BIT(8) |
| #define NPCM7XX_PWM_CTRL_CH2_EN_BIT BIT(12) |
| #define NPCM7XX_PWM_CTRL_CH3_EN_BIT BIT(16) |
| |
| /* Define the maximum PWM channel number */ |
| #ifdef CONFIG_ARCH_NPCM7XX |
| #define NPCM7XX_PWM_MAX_CHN_NUM 8 |
| #define NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE 4 |
| #define NPCM7XX_PWM_MAX_MODULES 2 |
| #else |
| #define NPCM7XX_PWM_MAX_CHN_NUM 12 |
| #define NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE 4 |
| #define NPCM7XX_PWM_MAX_MODULES 3 |
| #endif |
| |
| /* Define the Counter Register, value = 100 for match 100% */ |
| #define NPCM7XX_PWM_COUNTER_DEFAULT_NUM 255 |
| #define NPCM7XX_PWM_CMR_DEFAULT_NUM 255 |
| #define NPCM7XX_PWM_CMR_MAX 255 |
| |
| /* default all PWM channels PRESCALE2 = 1 */ |
| #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH0 0x4 |
| #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH1 0x40 |
| #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH2 0x400 |
| #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH3 0x4000 |
| |
| #define PWM_OUTPUT_FREQ_25KHZ 25000 |
| #define PWN_CNT_DEFAULT 256 |
| #define MIN_PRESCALE1 2 |
| #define NPCM7XX_PWM_PRESCALE_SHIFT_CH01 8 |
| |
| #define NPCM7XX_PWM_PRESCALE2_DEFAULT (NPCM7XX_PWM_PRESCALE2_DEFAULT_CH0 | \ |
| NPCM7XX_PWM_PRESCALE2_DEFAULT_CH1 | \ |
| NPCM7XX_PWM_PRESCALE2_DEFAULT_CH2 | \ |
| NPCM7XX_PWM_PRESCALE2_DEFAULT_CH3) |
| |
| #define NPCM7XX_PWM_CTRL_MODE_DEFAULT (NPCM7XX_PWM_CTRL_CH0_MODE_BIT | \ |
| NPCM7XX_PWM_CTRL_CH1_MODE_BIT | \ |
| NPCM7XX_PWM_CTRL_CH2_MODE_BIT | \ |
| NPCM7XX_PWM_CTRL_CH3_MODE_BIT) |
| |
| /* NPCM7XX FAN Tacho registers */ |
| #define NPCM7XX_FAN_REG_BASE(base, n) ((base) + ((n) * 0x1000L)) |
| |
| #define NPCM7XX_FAN_REG_TCNT1(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x00) |
| #define NPCM7XX_FAN_REG_TCRA(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x02) |
| #define NPCM7XX_FAN_REG_TCRB(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x04) |
| #define NPCM7XX_FAN_REG_TCNT2(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x06) |
| #define NPCM7XX_FAN_REG_TPRSC(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x08) |
| #define NPCM7XX_FAN_REG_TCKC(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x0A) |
| #define NPCM7XX_FAN_REG_TMCTRL(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x0C) |
| #define NPCM7XX_FAN_REG_TICTRL(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x0E) |
| #define NPCM7XX_FAN_REG_TICLR(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x10) |
| #define NPCM7XX_FAN_REG_TIEN(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x12) |
| #define NPCM7XX_FAN_REG_TCPA(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x14) |
| #define NPCM7XX_FAN_REG_TCPB(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x16) |
| #define NPCM7XX_FAN_REG_TCPCFG(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x18) |
| #define NPCM7XX_FAN_REG_TINASEL(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x1A) |
| #define NPCM7XX_FAN_REG_TINBSEL(base, n) (NPCM7XX_FAN_REG_BASE(base, n) + 0x1C) |
| |
| #define NPCM7XX_FAN_TCKC_CLKX_NONE 0 |
| #define NPCM7XX_FAN_TCKC_CLK1_APB BIT(0) |
| #define NPCM7XX_FAN_TCKC_CLK2_APB BIT(3) |
| |
| #define NPCM7XX_FAN_TMCTRL_TBEN BIT(6) |
| #define NPCM7XX_FAN_TMCTRL_TAEN BIT(5) |
| #define NPCM7XX_FAN_TMCTRL_TBEDG BIT(4) |
| #define NPCM7XX_FAN_TMCTRL_TAEDG BIT(3) |
| #define NPCM7XX_FAN_TMCTRL_MODE_5 BIT(2) |
| |
| #define NPCM7XX_FAN_TICLR_CLEAR_ALL GENMASK(5, 0) |
| #define NPCM7XX_FAN_TICLR_TFCLR BIT(5) |
| #define NPCM7XX_FAN_TICLR_TECLR BIT(4) |
| #define NPCM7XX_FAN_TICLR_TDCLR BIT(3) |
| #define NPCM7XX_FAN_TICLR_TCCLR BIT(2) |
| #define NPCM7XX_FAN_TICLR_TBCLR BIT(1) |
| #define NPCM7XX_FAN_TICLR_TACLR BIT(0) |
| |
| #define NPCM7XX_FAN_TIEN_ENABLE_ALL GENMASK(5, 0) |
| #define NPCM7XX_FAN_TIEN_TFIEN BIT(5) |
| #define NPCM7XX_FAN_TIEN_TEIEN BIT(4) |
| #define NPCM7XX_FAN_TIEN_TDIEN BIT(3) |
| #define NPCM7XX_FAN_TIEN_TCIEN BIT(2) |
| #define NPCM7XX_FAN_TIEN_TBIEN BIT(1) |
| #define NPCM7XX_FAN_TIEN_TAIEN BIT(0) |
| |
| #define NPCM7XX_FAN_TICTRL_TFPND BIT(5) |
| #define NPCM7XX_FAN_TICTRL_TEPND BIT(4) |
| #define NPCM7XX_FAN_TICTRL_TDPND BIT(3) |
| #define NPCM7XX_FAN_TICTRL_TCPND BIT(2) |
| #define NPCM7XX_FAN_TICTRL_TBPND BIT(1) |
| #define NPCM7XX_FAN_TICTRL_TAPND BIT(0) |
| |
| #define NPCM7XX_FAN_TCPCFG_HIBEN BIT(7) |
| #define NPCM7XX_FAN_TCPCFG_EQBEN BIT(6) |
| #define NPCM7XX_FAN_TCPCFG_LOBEN BIT(5) |
| #define NPCM7XX_FAN_TCPCFG_CPBSEL BIT(4) |
| #define NPCM7XX_FAN_TCPCFG_HIAEN BIT(3) |
| #define NPCM7XX_FAN_TCPCFG_EQAEN BIT(2) |
| #define NPCM7XX_FAN_TCPCFG_LOAEN BIT(1) |
| #define NPCM7XX_FAN_TCPCFG_CPASEL BIT(0) |
| |
| /* FAN General Definition */ |
| /* Define the maximum FAN channel number */ |
| #define NPCM7XX_FAN_MAX_MODULE 8 |
| #define NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE 2 |
| #define NPCM7XX_FAN_MAX_CHN_NUM 16 |
| |
| /* |
| * Get Fan Tach Timeout (base on clock 214843.75Hz, 1 cnt = 4.654us) |
| * Timeout 94ms ~= 0x5000 |
| * (The minimum FAN speed could to support ~640RPM/pulse 1, |
| * 320RPM/pulse 2, ...-- 10.6Hz) |
| */ |
| #define NPCM7XX_FAN_TIMEOUT 0x5000 |
| #define NPCM7XX_FAN_TCNT 0xFFFF |
| #define NPCM7XX_FAN_TCPA (NPCM7XX_FAN_TCNT - NPCM7XX_FAN_TIMEOUT) |
| #define NPCM7XX_FAN_TCPB (NPCM7XX_FAN_TCNT - NPCM7XX_FAN_TIMEOUT) |
| |
| #define NPCM7XX_FAN_POLL_TIMER_200MS 200 |
| #define NPCM7XX_FAN_DEFAULT_PULSE_PER_REVOLUTION 2 |
| #define NPCM7XX_FAN_TINASEL_FANIN_DEFAULT 0 |
| #define NPCM7XX_FAN_CLK_PRESCALE 255 |
| #define NPCM7XX_FAN_FILTER_COUNT 4 |
| |
| #define NPCM7XX_FAN_CMPA 0 |
| #define NPCM7XX_FAN_CMPB 1 |
| |
| /* Obtain the fan number */ |
| #define NPCM7XX_FAN_INPUT(fan, cmp) (((fan) << 1) + (cmp)) |
| |
| /* fan sample status */ |
| #define FAN_DISABLE 0xFF |
| #define FAN_INIT 0x00 |
| #define FAN_PREPARE_TO_GET_FIRST_CAPTURE 0x01 |
| #define FAN_ENOUGH_SAMPLE 0x02 |
| |
| struct npcm7xx_fan_dev { |
| u8 fan_pls_per_rev; |
| u16 fan_cnt; |
| u32 fan_cnt_tmp; |
| bool fan_filter_en; |
| }; |
| |
| struct npcm7xx_cooling_device { |
| char name[THERMAL_NAME_LENGTH]; |
| struct npcm7xx_pwm_fan_data *data; |
| struct thermal_cooling_device *tcdev; |
| int pwm_port; |
| u8 *cooling_levels; |
| u8 max_state; |
| u8 cur_state; |
| }; |
| |
| struct npcm7xx_pwm_fan_data { |
| void __iomem *pwm_base; |
| void __iomem *fan_base; |
| unsigned long pwm_clk_freq; |
| unsigned long fan_clk_freq; |
| struct clk *pwm_clk; |
| struct clk *fan_clk; |
| struct mutex pwm_lock[NPCM7XX_PWM_MAX_MODULES]; |
| spinlock_t fan_lock[NPCM7XX_FAN_MAX_MODULE]; |
| int fan_irq[NPCM7XX_FAN_MAX_MODULE]; |
| bool pwm_present[NPCM7XX_PWM_MAX_CHN_NUM]; |
| bool fan_present[NPCM7XX_FAN_MAX_CHN_NUM]; |
| u16 fan_filter_array[NPCM7XX_FAN_MAX_CHN_NUM][NPCM7XX_FAN_FILTER_COUNT]; |
| int fan_filter_cnt; |
| u32 input_clk_freq; |
| struct timer_list fan_filter_timer; |
| struct npcm7xx_fan_dev fan_dev[NPCM7XX_FAN_MAX_CHN_NUM]; |
| struct npcm7xx_cooling_device *cdev[NPCM7XX_PWM_MAX_CHN_NUM]; |
| u8 fan_select; |
| }; |
| |
| static int npcm7xx_pwm_config_set(struct npcm7xx_pwm_fan_data *data, |
| int channel, u16 val) |
| { |
| u32 pwm_ch = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE); |
| u32 module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE); |
| u32 tmp_buf, ctrl_en_bit, env_bit; |
| |
| /* |
| * Config PWM Comparator register for setting duty cycle |
| */ |
| mutex_lock(&data->pwm_lock[module]); |
| |
| /* write new CMR value */ |
| iowrite32(val, NPCM7XX_PWM_REG_CMRx(data->pwm_base, module, pwm_ch)); |
| tmp_buf = ioread32(NPCM7XX_PWM_REG_CR(data->pwm_base, module)); |
| |
| switch (pwm_ch) { |
| case 0: |
| ctrl_en_bit = NPCM7XX_PWM_CTRL_CH0_EN_BIT; |
| env_bit = NPCM7XX_PWM_CTRL_CH0_INV_BIT; |
| break; |
| case 1: |
| ctrl_en_bit = NPCM7XX_PWM_CTRL_CH1_EN_BIT; |
| env_bit = NPCM7XX_PWM_CTRL_CH1_INV_BIT; |
| break; |
| case 2: |
| ctrl_en_bit = NPCM7XX_PWM_CTRL_CH2_EN_BIT; |
| env_bit = NPCM7XX_PWM_CTRL_CH2_INV_BIT; |
| break; |
| case 3: |
| ctrl_en_bit = NPCM7XX_PWM_CTRL_CH3_EN_BIT; |
| env_bit = NPCM7XX_PWM_CTRL_CH3_INV_BIT; |
| break; |
| default: |
| mutex_unlock(&data->pwm_lock[module]); |
| return -ENODEV; |
| } |
| |
| if (val == 0) { |
| /* Disable PWM */ |
| tmp_buf &= ~ctrl_en_bit; |
| tmp_buf |= env_bit; |
| } else { |
| /* Enable PWM */ |
| tmp_buf |= ctrl_en_bit; |
| tmp_buf &= ~env_bit; |
| } |
| |
| iowrite32(tmp_buf, NPCM7XX_PWM_REG_CR(data->pwm_base, module)); |
| mutex_unlock(&data->pwm_lock[module]); |
| |
| return 0; |
| } |
| |
| static void npcm7xx_fan_filter_array(struct timer_list *t) |
| { |
| struct npcm7xx_pwm_fan_data *data; |
| int i; |
| |
| data = from_timer(data, t, fan_filter_timer); |
| |
| for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM / 2; i++) { |
| data->fan_filter_array[i * 2][data->fan_filter_cnt] = |
| NPCM7XX_FAN_TCNT - |
| ioread16(NPCM7XX_FAN_REG_TCRA(data->fan_base, i)); |
| data->fan_filter_array[(i * 2) + 1][data->fan_filter_cnt] = |
| NPCM7XX_FAN_TCNT - |
| ioread16(NPCM7XX_FAN_REG_TCRB(data->fan_base, i)); |
| } |
| |
| data->fan_filter_cnt++; |
| if (data->fan_filter_cnt == NPCM7XX_FAN_FILTER_COUNT) |
| data->fan_filter_cnt = 0; |
| |
| /* reset the timer interval */ |
| data->fan_filter_timer.expires = jiffies + |
| msecs_to_jiffies(NPCM7XX_FAN_POLL_TIMER_200MS); |
| add_timer(&data->fan_filter_timer); |
| } |
| |
| static u16 npcm7xx_fan_filter(struct npcm7xx_pwm_fan_data *data, |
| u16 last_fnt_cnt, int channel) |
| { |
| int i; |
| |
| for (i = 0; i < NPCM7XX_FAN_FILTER_COUNT; i++) { |
| if (last_fnt_cnt < data->fan_filter_array[channel][i]) |
| last_fnt_cnt = data->fan_filter_array[channel][i]; |
| } |
| |
| return last_fnt_cnt; |
| } |
| |
| static irqreturn_t npcm7xx_fan_isr(int irq, void *dev_id) |
| { |
| struct npcm7xx_pwm_fan_data *data = dev_id; |
| u8 flag, fan_tien; |
| int module; |
| |
| module = irq - data->fan_irq[0]; |
| |
| fan_tien = ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, module)); |
| flag = ioread8(NPCM7XX_FAN_REG_TICTRL(data->fan_base, module)); |
| if (flag & NPCM7XX_FAN_TIEN_TAIEN) { |
| fan_tien &= ~NPCM7XX_FAN_TIEN_TAIEN; |
| fan_tien |= NPCM7XX_FAN_TIEN_TEIEN; |
| } |
| if (flag & NPCM7XX_FAN_TIEN_TBIEN) { |
| fan_tien &= ~NPCM7XX_FAN_TIEN_TBIEN; |
| fan_tien |= NPCM7XX_FAN_TIEN_TFIEN; |
| } |
| if (flag & NPCM7XX_FAN_TIEN_TEIEN) { |
| iowrite16(NPCM7XX_FAN_TCNT, |
| NPCM7XX_FAN_REG_TCRA(data->fan_base, module)); |
| fan_tien &= ~NPCM7XX_FAN_TIEN_TEIEN; |
| fan_tien |= NPCM7XX_FAN_TIEN_TAIEN; |
| } |
| if (flag & NPCM7XX_FAN_TIEN_TFIEN){ |
| iowrite16(NPCM7XX_FAN_TCNT, |
| NPCM7XX_FAN_REG_TCRB(data->fan_base, module)); |
| fan_tien &= ~NPCM7XX_FAN_TIEN_TFIEN; |
| fan_tien |= NPCM7XX_FAN_TIEN_TBIEN; |
| } |
| iowrite8(flag, NPCM7XX_FAN_REG_TICLR(data->fan_base, module)); |
| iowrite8(fan_tien, NPCM7XX_FAN_REG_TIEN(data->fan_base, module)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int npcm7xx_read_pwm(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev); |
| u32 pmw_ch = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE); |
| u32 module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE); |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| *val = ioread32 |
| (NPCM7XX_PWM_REG_CMRx(data->pwm_base, module, pmw_ch)); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int npcm7xx_write_pwm(struct device *dev, u32 attr, int channel, |
| long val) |
| { |
| struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev); |
| int err; |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| if (val < 0 || val > NPCM7XX_PWM_CMR_MAX) |
| return -EINVAL; |
| err = npcm7xx_pwm_config_set(data, channel, (u16)val); |
| break; |
| default: |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| return err; |
| } |
| |
| static umode_t npcm7xx_pwm_is_visible(const void *_data, u32 attr, int channel) |
| { |
| const struct npcm7xx_pwm_fan_data *data = _data; |
| |
| if (!data->pwm_present[channel]) |
| return 0; |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| return 0644; |
| default: |
| return 0; |
| } |
| } |
| |
| static int npcm7xx_read_fan(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev); |
| int fan_ch = channel / 2; |
| u16 fan_cap, fan_cnt; |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| if (channel % 2) |
| fan_cap = |
| ioread16(NPCM7XX_FAN_REG_TCRB(data->fan_base, fan_ch)); |
| else |
| fan_cap = |
| ioread16(NPCM7XX_FAN_REG_TCRA(data->fan_base, fan_ch)); |
| |
| fan_cnt = NPCM7XX_FAN_TCNT - fan_cap; |
| |
| if (data->fan_dev[channel].fan_filter_en) |
| fan_cnt = npcm7xx_fan_filter(data, fan_cnt, channel); |
| |
| *val = 0; |
| if (fan_cnt <= 0) |
| return fan_cnt; |
| |
| /* Convert the raw reading to RPM */ |
| if (fan_cnt > 0 && data->fan_dev[channel].fan_pls_per_rev > 0) |
| *val = ((data->input_clk_freq * 60) / (fan_cnt * |
| data->fan_dev[channel].fan_pls_per_rev)); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t npcm7xx_fan_is_visible(const void *_data, u32 attr, int channel) |
| { |
| const struct npcm7xx_pwm_fan_data *data = _data; |
| |
| if (!data->fan_present[channel]) |
| return 0; |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| return 0444; |
| default: |
| return 0; |
| } |
| } |
| |
| static int npcm7xx_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| switch (type) { |
| case hwmon_pwm: |
| return npcm7xx_read_pwm(dev, attr, channel, val); |
| case hwmon_fan: |
| return npcm7xx_read_fan(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int npcm7xx_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| switch (type) { |
| case hwmon_pwm: |
| return npcm7xx_write_pwm(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t npcm7xx_is_visible(const void *data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| switch (type) { |
| case hwmon_pwm: |
| return npcm7xx_pwm_is_visible(data, attr, channel); |
| case hwmon_fan: |
| return npcm7xx_fan_is_visible(data, attr, channel); |
| default: |
| return 0; |
| } |
| } |
| |
| static const struct hwmon_channel_info *npcm7xx_info[] = { |
| HWMON_CHANNEL_INFO(pwm, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT), |
| HWMON_CHANNEL_INFO(fan, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT), |
| NULL |
| }; |
| |
| static const struct hwmon_channel_info *npcm8xx_info[] = { |
| HWMON_CHANNEL_INFO(pwm, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT, |
| HWMON_PWM_INPUT), |
| HWMON_CHANNEL_INFO(fan, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT, |
| HWMON_F_INPUT), |
| NULL |
| }; |
| |
| static const struct hwmon_ops npcm7xx_hwmon_ops = { |
| .is_visible = npcm7xx_is_visible, |
| .read = npcm7xx_read, |
| .write = npcm7xx_write, |
| }; |
| |
| static const struct hwmon_chip_info npcm7xx_chip_info = { |
| .ops = &npcm7xx_hwmon_ops, |
| .info = npcm7xx_info, |
| }; |
| |
| static const struct hwmon_ops npcm8xx_hwmon_ops = { |
| .is_visible = npcm7xx_is_visible, |
| .read = npcm7xx_read, |
| .write = npcm7xx_write, |
| }; |
| |
| static const struct hwmon_chip_info npcm8xx_chip_info = { |
| .ops = &npcm8xx_hwmon_ops, |
| .info = npcm8xx_info, |
| }; |
| |
| static u32 npcm7xx_pwm_init(struct npcm7xx_pwm_fan_data *data) |
| { |
| int m, ch; |
| u32 prescale_val, output_freq; |
| |
| data->pwm_clk_freq = clk_get_rate(data->pwm_clk); |
| |
| /* Adjust NPCM7xx PWMs output frequency to ~25Khz */ |
| output_freq = data->pwm_clk_freq / PWN_CNT_DEFAULT; |
| prescale_val = DIV_ROUND_CLOSEST(output_freq, PWM_OUTPUT_FREQ_25KHZ); |
| |
| /* If prescale_val = 0, then the prescale output clock is stopped */ |
| if (prescale_val < MIN_PRESCALE1) |
| prescale_val = MIN_PRESCALE1; |
| /* |
| * prescale_val need to decrement in one because in the PWM Prescale |
| * register the Prescale value increment by one |
| */ |
| prescale_val--; |
| |
| /* Setting PWM Prescale Register value register to both modules */ |
| prescale_val |= (prescale_val << NPCM7XX_PWM_PRESCALE_SHIFT_CH01); |
| |
| for (m = 0; m < NPCM7XX_PWM_MAX_MODULES ; m++) { |
| iowrite32(prescale_val, NPCM7XX_PWM_REG_PR(data->pwm_base, m)); |
| iowrite32(NPCM7XX_PWM_PRESCALE2_DEFAULT, |
| NPCM7XX_PWM_REG_CSR(data->pwm_base, m)); |
| iowrite32(NPCM7XX_PWM_CTRL_MODE_DEFAULT, |
| NPCM7XX_PWM_REG_CR(data->pwm_base, m)); |
| |
| for (ch = 0; ch < NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE; ch++) { |
| iowrite32(NPCM7XX_PWM_COUNTER_DEFAULT_NUM, |
| NPCM7XX_PWM_REG_CNRx(data->pwm_base, m, ch)); |
| } |
| } |
| |
| return output_freq / ((prescale_val & 0xf) + 1); |
| } |
| |
| static void npcm7xx_fan_init(struct npcm7xx_pwm_fan_data *data) |
| { |
| int i; |
| int md; |
| int ch; |
| u32 apb_clk_freq; |
| |
| for (md = 0; md < NPCM7XX_FAN_MAX_MODULE; md++) { |
| /* stop FAN0~7 clock */ |
| iowrite8(NPCM7XX_FAN_TCKC_CLKX_NONE, |
| NPCM7XX_FAN_REG_TCKC(data->fan_base, md)); |
| |
| /* disable all interrupt */ |
| iowrite8(0x00, NPCM7XX_FAN_REG_TIEN(data->fan_base, md)); |
| |
| /* clear all interrupt */ |
| iowrite8(NPCM7XX_FAN_TICLR_CLEAR_ALL, |
| NPCM7XX_FAN_REG_TICLR(data->fan_base, md)); |
| |
| /* set FAN0~7 clock prescaler */ |
| iowrite8(NPCM7XX_FAN_CLK_PRESCALE, |
| NPCM7XX_FAN_REG_TPRSC(data->fan_base, md)); |
| |
| /* set FAN0~7 mode (high-to-low transition) */ |
| iowrite8((NPCM7XX_FAN_TMCTRL_MODE_5 | NPCM7XX_FAN_TMCTRL_TBEN | |
| NPCM7XX_FAN_TMCTRL_TAEN), |
| NPCM7XX_FAN_REG_TMCTRL(data->fan_base, md)); |
| |
| /* set FAN0~7 Initial Count/Cap */ |
| iowrite16(NPCM7XX_FAN_TCNT, |
| NPCM7XX_FAN_REG_TCNT1(data->fan_base, md)); |
| iowrite16(NPCM7XX_FAN_TCNT, |
| NPCM7XX_FAN_REG_TCNT2(data->fan_base, md)); |
| |
| /* set FAN0~7 compare (equal to count) */ |
| iowrite8((NPCM7XX_FAN_TCPCFG_EQAEN | NPCM7XX_FAN_TCPCFG_EQBEN), |
| NPCM7XX_FAN_REG_TCPCFG(data->fan_base, md)); |
| |
| /* set FAN0~7 compare value */ |
| iowrite16(NPCM7XX_FAN_TCPA, |
| NPCM7XX_FAN_REG_TCPA(data->fan_base, md)); |
| iowrite16(NPCM7XX_FAN_TCPB, |
| NPCM7XX_FAN_REG_TCPB(data->fan_base, md)); |
| |
| /* set FAN0~7 fan input FANIN 0~15 */ |
| iowrite8(NPCM7XX_FAN_TINASEL_FANIN_DEFAULT, |
| NPCM7XX_FAN_REG_TINASEL(data->fan_base, md)); |
| iowrite8(NPCM7XX_FAN_TINASEL_FANIN_DEFAULT, |
| NPCM7XX_FAN_REG_TINBSEL(data->fan_base, md)); |
| |
| for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE; i++) { |
| ch = md * NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE + i; |
| data->fan_dev[ch].fan_pls_per_rev = |
| NPCM7XX_FAN_DEFAULT_PULSE_PER_REVOLUTION; |
| data->fan_dev[ch].fan_cnt = 0; |
| } |
| } |
| |
| apb_clk_freq = clk_get_rate(data->fan_clk); |
| |
| /* Fan tach input clock = APB clock / prescalar, default is 255. */ |
| data->input_clk_freq = apb_clk_freq / (NPCM7XX_FAN_CLK_PRESCALE + 1); |
| } |
| |
| static int |
| npcm7xx_pwm_cz_get_max_state(struct thermal_cooling_device *tcdev, |
| unsigned long *state) |
| { |
| struct npcm7xx_cooling_device *cdev = tcdev->devdata; |
| |
| *state = cdev->max_state; |
| |
| return 0; |
| } |
| |
| static int |
| npcm7xx_pwm_cz_get_cur_state(struct thermal_cooling_device *tcdev, |
| unsigned long *state) |
| { |
| struct npcm7xx_cooling_device *cdev = tcdev->devdata; |
| |
| *state = cdev->cur_state; |
| |
| return 0; |
| } |
| |
| static int |
| npcm7xx_pwm_cz_set_cur_state(struct thermal_cooling_device *tcdev, |
| unsigned long state) |
| { |
| struct npcm7xx_cooling_device *cdev = tcdev->devdata; |
| int ret; |
| |
| if (state > cdev->max_state) |
| return -EINVAL; |
| |
| cdev->cur_state = state; |
| ret = npcm7xx_pwm_config_set(cdev->data, cdev->pwm_port, |
| cdev->cooling_levels[cdev->cur_state]); |
| |
| return ret; |
| } |
| |
| static const struct thermal_cooling_device_ops npcm7xx_pwm_cool_ops = { |
| .get_max_state = npcm7xx_pwm_cz_get_max_state, |
| .get_cur_state = npcm7xx_pwm_cz_get_cur_state, |
| .set_cur_state = npcm7xx_pwm_cz_set_cur_state, |
| }; |
| |
| static int npcm7xx_create_pwm_cooling(struct device *dev, |
| struct device_node *child, |
| struct npcm7xx_pwm_fan_data *data, |
| u32 pwm_port, u8 num_levels) |
| { |
| int ret; |
| struct npcm7xx_cooling_device *cdev; |
| |
| cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL); |
| if (!cdev) |
| return -ENOMEM; |
| |
| cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL); |
| if (!cdev->cooling_levels) |
| return -ENOMEM; |
| |
| cdev->max_state = num_levels - 1; |
| ret = of_property_read_u8_array(child, "cooling-levels", |
| cdev->cooling_levels, |
| num_levels); |
| if (ret) { |
| dev_err(dev, "Property 'cooling-levels' cannot be read.\n"); |
| return ret; |
| } |
| snprintf(cdev->name, THERMAL_NAME_LENGTH, "%pOFn%d", child, |
| pwm_port); |
| |
| cdev->tcdev = devm_thermal_of_cooling_device_register(dev, child, |
| cdev->name, cdev, &npcm7xx_pwm_cool_ops); |
| if (IS_ERR(cdev->tcdev)) |
| return PTR_ERR(cdev->tcdev); |
| |
| cdev->data = data; |
| cdev->pwm_port = pwm_port; |
| |
| data->cdev[pwm_port] = cdev; |
| |
| return 0; |
| } |
| |
| static int npcm7xx_en_pwm_fan(struct device *dev, |
| struct device_node *child, |
| struct npcm7xx_pwm_fan_data *data) |
| { |
| u8 *fan_ch; |
| u32 pwm_port; |
| int ret, fan_cnt, md; |
| u8 index, ch, fan_tckc, fan_tien; |
| bool fan_filter_en; |
| |
| ret = of_property_read_u32(child, "reg", &pwm_port); |
| if (ret) |
| return ret; |
| |
| data->pwm_present[pwm_port] = true; |
| ret = npcm7xx_pwm_config_set(data, pwm_port, |
| NPCM7XX_PWM_CMR_DEFAULT_NUM); |
| |
| ret = of_property_count_u8_elems(child, "cooling-levels"); |
| if (ret > 0) { |
| ret = npcm7xx_create_pwm_cooling(dev, child, data, pwm_port, |
| ret); |
| if (ret) |
| return ret; |
| } |
| |
| fan_cnt = of_property_count_u8_elems(child, "fan-tach-ch"); |
| if (fan_cnt < 1) |
| return -EINVAL; |
| |
| fan_ch = devm_kcalloc(dev, fan_cnt, sizeof(*fan_ch), GFP_KERNEL); |
| if (!fan_ch) |
| return -ENOMEM; |
| |
| ret = of_property_read_u8_array(child, "fan-tach-ch", fan_ch, fan_cnt); |
| if (ret) |
| return ret; |
| |
| fan_filter_en = of_property_read_bool(child, "fan_filter_en"); |
| |
| for (ch = 0; ch < fan_cnt; ch++) { |
| index = fan_ch[ch]; |
| data->fan_present[index] = true; |
| data->fan_dev[index].fan_pls_per_rev = |
| NPCM7XX_FAN_DEFAULT_PULSE_PER_REVOLUTION; |
| data->fan_dev[index].fan_filter_en = fan_filter_en; |
| |
| md = index / 2; |
| fan_tckc = ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base, md)); |
| fan_tien = ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, md)); |
| if (index % 2) { |
| fan_tckc |= NPCM7XX_FAN_TCKC_CLK2_APB; |
| fan_tien |= NPCM7XX_FAN_TIEN_TFIEN; |
| } else { |
| fan_tckc |= NPCM7XX_FAN_TCKC_CLK1_APB; |
| fan_tien |= NPCM7XX_FAN_TIEN_TEIEN; |
| } |
| /* Enable FAN counter */ |
| iowrite8(fan_tckc, NPCM7XX_FAN_REG_TCKC(data->fan_base, md)); |
| /* Enable FAN underflow interrupt */ |
| iowrite8(fan_tien, NPCM7XX_FAN_REG_TIEN(data->fan_base, md)); |
| } |
| |
| return 0; |
| } |
| |
| static int npcm7xx_pwm_fan_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np, *child; |
| struct npcm7xx_pwm_fan_data *data; |
| struct resource *res; |
| struct device *hwmon; |
| char name[20]; |
| int ret, cnt; |
| u32 output_freq; |
| u32 i; |
| |
| np = dev->of_node; |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"); |
| if (!res) { |
| dev_err(dev, "pwm resource not found\n"); |
| return -ENODEV; |
| } |
| |
| data->pwm_base = devm_ioremap_resource(dev, res); |
| dev_dbg(dev, "pwm base resource is %pR\n", res); |
| if (IS_ERR(data->pwm_base)) |
| return PTR_ERR(data->pwm_base); |
| |
| data->pwm_clk = devm_clk_get(dev, "pwm"); |
| if (IS_ERR(data->pwm_clk)) { |
| dev_err(dev, "couldn't get pwm clock\n"); |
| return PTR_ERR(data->pwm_clk); |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fan"); |
| if (!res) { |
| dev_err(dev, "fan resource not found\n"); |
| return -ENODEV; |
| } |
| |
| data->fan_base = devm_ioremap_resource(dev, res); |
| dev_dbg(dev, "fan base resource is %pR\n", res); |
| if (IS_ERR(data->fan_base)) |
| return PTR_ERR(data->fan_base); |
| |
| data->fan_clk = devm_clk_get(dev, "fan"); |
| if (IS_ERR(data->fan_clk)) { |
| dev_err(dev, "couldn't get fan clock\n"); |
| return PTR_ERR(data->fan_clk); |
| } |
| |
| output_freq = npcm7xx_pwm_init(data); |
| |
| for (cnt = 0; cnt < NPCM7XX_PWM_MAX_MODULES ; cnt++) |
| mutex_init(&data->pwm_lock[cnt]); |
| |
| for (i = 0; i < NPCM7XX_FAN_MAX_MODULE; i++) { |
| spin_lock_init(&data->fan_lock[i]); |
| |
| data->fan_irq[i] = platform_get_irq(pdev, i); |
| if (data->fan_irq[i] < 0) |
| return data->fan_irq[i]; |
| |
| sprintf(name, "NPCM7XX-FAN-MD%d", i); |
| ret = devm_request_irq(dev, data->fan_irq[i], npcm7xx_fan_isr, |
| 0, name, (void *)data); |
| if (ret) { |
| dev_err(dev, "register IRQ fan%d failed\n", i); |
| return ret; |
| } |
| } |
| |
| npcm7xx_fan_init(data); |
| |
| for_each_child_of_node(np, child) { |
| ret = npcm7xx_en_pwm_fan(dev, child, data); |
| if (ret) { |
| dev_err(dev, "enable pwm and fan failed\n"); |
| of_node_put(child); |
| return ret; |
| } |
| } |
| |
| if (of_device_is_compatible(np, "nuvoton,npcm750-pwm-fan")) { |
| hwmon = devm_hwmon_device_register_with_info(dev, "npcm7xx_pwm_fan", |
| data, &npcm7xx_chip_info, |
| NULL); |
| if (IS_ERR(hwmon)) { |
| dev_err(dev, "unable to register npcm7xx hwmon device\n"); |
| return PTR_ERR(hwmon); |
| } |
| } |
| |
| if (of_device_is_compatible(np, "nuvoton,npcm845-pwm-fan")) { |
| hwmon = devm_hwmon_device_register_with_info(dev, "npcm8xx_pwm_fan", |
| data, &npcm8xx_chip_info, |
| NULL); |
| if (IS_ERR(hwmon)) { |
| dev_err(dev, "unable to register npcm8xx hwmon device\n"); |
| return PTR_ERR(hwmon); |
| } |
| } |
| |
| for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM; i++) { |
| if (data->fan_present[i] && data->fan_dev[i].fan_filter_en) { |
| data->fan_filter_timer.expires = jiffies + |
| msecs_to_jiffies(NPCM7XX_FAN_POLL_TIMER_200MS); |
| timer_setup(&data->fan_filter_timer, |
| npcm7xx_fan_filter_array, 0); |
| add_timer(&data->fan_filter_timer); |
| break; |
| } |
| } |
| |
| pr_info("NPCM7XX PWM-FAN Driver probed, output Freq %dHz[PWM], input Freq %dHz[FAN]\n", |
| output_freq, data->input_clk_freq); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id of_pwm_fan_match_table[] = { |
| { .compatible = "nuvoton,npcm750-pwm-fan", }, |
| { .compatible = "nuvoton,npcm845-pwm-fan", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_pwm_fan_match_table); |
| |
| static struct platform_driver npcm7xx_pwm_fan_driver = { |
| .probe = npcm7xx_pwm_fan_probe, |
| .driver = { |
| .name = "npcm7xx_pwm_fan", |
| .of_match_table = of_pwm_fan_match_table, |
| }, |
| }; |
| |
| module_platform_driver(npcm7xx_pwm_fan_driver); |
| |
| MODULE_DESCRIPTION("Nuvoton NPCM7XX PWM and Fan Tacho driver"); |
| MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>"); |
| MODULE_LICENSE("GPL v2"); |