Documentation/cpu-freq/pcc-cpufreq.txt - linux - Git at Google

 /*
  *  pcc-cpufreq.txt - PCC interface documentation
  *
  *  Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
  *  Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
  *      Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; version 2 of the License.
  *
  *  This program is distributed in the hope that it will be useful, but
  *  WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
  *  INFRINGEMENT. See the GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License along
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  */


 			Processor Clocking Control Driver
 			---------------------------------

 Contents:
 ---------
 1.	Introduction
 1.1	PCC interface
 1.1.1   Get Average Frequency
 1.1.2	Set Desired Frequency
 1.2	Platforms affected
 2.	Driver and /sys details
 2.1	scaling_available_frequencies
 2.2	cpuinfo_transition_latency
 2.3	cpuinfo_cur_freq
 2.4	related_cpus
 3.	Caveats

 1. Introduction:
 ----------------
 Processor Clocking Control (PCC) is an interface between the platform
 firmware and OSPM. It is a mechanism for coordinating processor
 performance (ie: frequency) between the platform firmware and the OS.

 The PCC driver (pcc-cpufreq) allows OSPM to take advantage of the PCC
 interface.

 OS utilizes the PCC interface to inform platform firmware what frequency the
 OS wants for a logical processor. The platform firmware attempts to achieve
 the requested frequency. If the request for the target frequency could not be
 satisfied by platform firmware, then it usually means that power budget
 conditions are in place, and "power capping" is taking place.

 1.1 PCC interface:
 ------------------
 The complete PCC specification is available here:
 http://www.acpica.org/download/Processor-Clocking-Control-v1p0.pdf

 PCC relies on a shared memory region that provides a channel for communication
 between the OS and platform firmware. PCC also implements a "doorbell" that
 is used by the OS to inform the platform firmware that a command has been
 sent.

 The ACPI PCCH() method is used to discover the location of the PCC shared
 memory region. The shared memory region header contains the "command" and
 "status" interface. PCCH() also contains details on how to access the platform
 doorbell.

 The following commands are supported by the PCC interface:
 * Get Average Frequency
 * Set Desired Frequency

 The ACPI PCCP() method is implemented for each logical processor and is
 used to discover the offsets for the input and output buffers in the shared
 memory region.

 When PCC mode is enabled, the platform will not expose processor performance
 or throttle states (_PSS, _TSS and related ACPI objects) to OSPM. Therefore,
 the native P-state driver (such as acpi-cpufreq for Intel, powernow-k8 for
 AMD) will not load.

 However, OSPM remains in control of policy. The governor (eg: "ondemand")
 computes the required performance for each processor based on server workload.
 The PCC driver fills in the command interface, and the input buffer and
 communicates the request to the platform firmware. The platform firmware is
 responsible for delivering the requested performance.

 Each PCC command is "global" in scope and can affect all the logical CPUs in
 the system. Therefore, PCC is capable of performing "group" updates. With PCC
 the OS is capable of getting/setting the frequency of all the logical CPUs in
 the system with a single call to the BIOS.

 1.1.1 Get Average Frequency:
 ----------------------------
 This command is used by the OSPM to query the running frequency of the
 processor since the last time this command was completed. The output buffer
 indicates the average unhalted frequency of the logical processor expressed as
 a percentage of the nominal (ie: maximum) CPU frequency. The output buffer
 also signifies if the CPU frequency is limited by a power budget condition.

 1.1.2 Set Desired Frequency:
 ----------------------------
 This command is used by the OSPM to communicate to the platform firmware the
 desired frequency for a logical processor. The output buffer is currently
 ignored by OSPM. The next invocation of "Get Average Frequency" will inform
 OSPM if the desired frequency was achieved or not.

 1.2 Platforms affected:
 -----------------------
 The PCC driver will load on any system where the platform firmware:
 * supports the PCC interface, and the associated PCCH() and PCCP() methods
 * assumes responsibility for managing the hardware clocking controls in order
 to deliver the requested processor performance

 Currently, certain HP ProLiant platforms implement the PCC interface. On those
 platforms PCC is the "default" choice.

 However, it is possible to disable this interface via a BIOS setting. In
 such an instance, as is also the case on platforms where the PCC interface
 is not implemented, the PCC driver will fail to load silently.

 2. Driver and /sys details:
 ---------------------------
 When the driver loads, it merely prints the lowest and the highest CPU
 frequencies supported by the platform firmware.

 The PCC driver loads with a message such as:
 pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2933
 MHz

 This means that the OPSM can request the CPU to run at any frequency in
 between the limits (1600 MHz, and 2933 MHz) specified in the message.

 Internally, there is no need for the driver to convert the "target" frequency
 to a corresponding P-state.

 The VERSION number for the driver will be of the format v.xy.ab.
 eg: 1.00.02
    ----- --
     |    |
     |    -- this will increase with bug fixes/enhancements to the driver
     |-- this is the version of the PCC specification the driver adheres to


 The following is a brief discussion on some of the fields exported via the
 /sys filesystem and how their values are affected by the PCC driver:

 2.1 scaling_available_frequencies:
 ----------------------------------
 scaling_available_frequencies is not created in /sys. No intermediate
 frequencies need to be listed because the BIOS will try to achieve any
 frequency, within limits, requested by the governor. A frequency does not have
 to be strictly associated with a P-state.

 2.2 cpuinfo_transition_latency:
 -------------------------------
 The cpuinfo_transition_latency field is 0. The PCC specification does
 not include a field to expose this value currently.

 2.3 cpuinfo_cur_freq:
 ---------------------
 A) Often cpuinfo_cur_freq will show a value different than what is declared
 in the scaling_available_frequencies or scaling_cur_freq, or scaling_max_freq.
 This is due to "turbo boost" available on recent Intel processors. If certain
 conditions are met the BIOS can achieve a slightly higher speed than requested
 by OSPM. An example:

 scaling_cur_freq	: 2933000
 cpuinfo_cur_freq	: 3196000

 B) There is a round-off error associated with the cpuinfo_cur_freq value.
 Since the driver obtains the current frequency as a "percentage" (%) of the
 nominal frequency from the BIOS, sometimes, the values displayed by
 scaling_cur_freq and cpuinfo_cur_freq may not match. An example:

 scaling_cur_freq	: 1600000
 cpuinfo_cur_freq	: 1583000

 In this example, the nominal frequency is 2933 MHz. The driver obtains the
 current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency:

 	54% of 2933 MHz = 1583 MHz

 Nominal frequency is the maximum frequency of the processor, and it usually
 corresponds to the frequency of the P0 P-state.

 2.4 related_cpus:
 -----------------
 The related_cpus field is identical to affected_cpus.

 affected_cpus	: 4
 related_cpus	: 4

 Currently, the PCC driver does not evaluate _PSD. The platforms that support
 PCC do not implement SW_ALL. So OSPM doesn't need to perform any coordination
 to ensure that the same frequency is requested of all dependent CPUs.

 3. Caveats:
 -----------
 The "cpufreq_stats" module in its present form cannot be loaded and
 expected to work with the PCC driver. Since the "cpufreq_stats" module
 provides information wrt each P-state, it is not applicable to the PCC driver.
	/*
	* pcc-cpufreq.txt - PCC interface documentation
	*
	* Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
	* Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
	* Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
	*
	* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; version 2 of the License.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
	* INFRINGEMENT. See the GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 675 Mass Ave, Cambridge, MA 02139, USA.
	*
	* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	*/


	Processor Clocking Control Driver
	---------------------------------

	Contents:
	---------
	1. Introduction
	1.1 PCC interface
	1.1.1 Get Average Frequency
	1.1.2 Set Desired Frequency
	1.2 Platforms affected
	2. Driver and /sys details
	2.1 scaling_available_frequencies
	2.2 cpuinfo_transition_latency
	2.3 cpuinfo_cur_freq
	2.4 related_cpus
	3. Caveats

	1. Introduction:
	----------------
	Processor Clocking Control (PCC) is an interface between the platform
	firmware and OSPM. It is a mechanism for coordinating processor
	performance (ie: frequency) between the platform firmware and the OS.

	The PCC driver (pcc-cpufreq) allows OSPM to take advantage of the PCC
	interface.

	OS utilizes the PCC interface to inform platform firmware what frequency the
	OS wants for a logical processor. The platform firmware attempts to achieve
	the requested frequency. If the request for the target frequency could not be
	satisfied by platform firmware, then it usually means that power budget
	conditions are in place, and "power capping" is taking place.

	1.1 PCC interface:
	------------------
	The complete PCC specification is available here:
	http://www.acpica.org/download/Processor-Clocking-Control-v1p0.pdf

	PCC relies on a shared memory region that provides a channel for communication
	between the OS and platform firmware. PCC also implements a "doorbell" that
	is used by the OS to inform the platform firmware that a command has been
	sent.

	The ACPI PCCH() method is used to discover the location of the PCC shared
	memory region. The shared memory region header contains the "command" and
	"status" interface. PCCH() also contains details on how to access the platform
	doorbell.

	The following commands are supported by the PCC interface:
	* Get Average Frequency
	* Set Desired Frequency

	The ACPI PCCP() method is implemented for each logical processor and is
	used to discover the offsets for the input and output buffers in the shared
	memory region.

	When PCC mode is enabled, the platform will not expose processor performance
	or throttle states (_PSS, _TSS and related ACPI objects) to OSPM. Therefore,
	the native P-state driver (such as acpi-cpufreq for Intel, powernow-k8 for
	AMD) will not load.

	However, OSPM remains in control of policy. The governor (eg: "ondemand")
	computes the required performance for each processor based on server workload.
	The PCC driver fills in the command interface, and the input buffer and
	communicates the request to the platform firmware. The platform firmware is
	responsible for delivering the requested performance.

	Each PCC command is "global" in scope and can affect all the logical CPUs in
	the system. Therefore, PCC is capable of performing "group" updates. With PCC
	the OS is capable of getting/setting the frequency of all the logical CPUs in
	the system with a single call to the BIOS.

	1.1.1 Get Average Frequency:
	----------------------------
	This command is used by the OSPM to query the running frequency of the
	processor since the last time this command was completed. The output buffer
	indicates the average unhalted frequency of the logical processor expressed as
	a percentage of the nominal (ie: maximum) CPU frequency. The output buffer
	also signifies if the CPU frequency is limited by a power budget condition.

	1.1.2 Set Desired Frequency:
	----------------------------
	This command is used by the OSPM to communicate to the platform firmware the
	desired frequency for a logical processor. The output buffer is currently
	ignored by OSPM. The next invocation of "Get Average Frequency" will inform
	OSPM if the desired frequency was achieved or not.

	1.2 Platforms affected:
	-----------------------
	The PCC driver will load on any system where the platform firmware:
	* supports the PCC interface, and the associated PCCH() and PCCP() methods
	* assumes responsibility for managing the hardware clocking controls in order
	to deliver the requested processor performance

	Currently, certain HP ProLiant platforms implement the PCC interface. On those
	platforms PCC is the "default" choice.

	However, it is possible to disable this interface via a BIOS setting. In
	such an instance, as is also the case on platforms where the PCC interface
	is not implemented, the PCC driver will fail to load silently.

	2. Driver and /sys details:
	---------------------------
	When the driver loads, it merely prints the lowest and the highest CPU
	frequencies supported by the platform firmware.

	The PCC driver loads with a message such as:
	pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2933
	MHz

	This means that the OPSM can request the CPU to run at any frequency in
	between the limits (1600 MHz, and 2933 MHz) specified in the message.

	Internally, there is no need for the driver to convert the "target" frequency
	to a corresponding P-state.

	The VERSION number for the driver will be of the format v.xy.ab.
	eg: 1.00.02
	----- --
	\| \|
	\| -- this will increase with bug fixes/enhancements to the driver
	\|-- this is the version of the PCC specification the driver adheres to


	The following is a brief discussion on some of the fields exported via the
	/sys filesystem and how their values are affected by the PCC driver:

	2.1 scaling_available_frequencies:
	----------------------------------
	scaling_available_frequencies is not created in /sys. No intermediate
	frequencies need to be listed because the BIOS will try to achieve any
	frequency, within limits, requested by the governor. A frequency does not have
	to be strictly associated with a P-state.

	2.2 cpuinfo_transition_latency:
	-------------------------------
	The cpuinfo_transition_latency field is 0. The PCC specification does
	not include a field to expose this value currently.

	2.3 cpuinfo_cur_freq:
	---------------------
	A) Often cpuinfo_cur_freq will show a value different than what is declared
	in the scaling_available_frequencies or scaling_cur_freq, or scaling_max_freq.
	This is due to "turbo boost" available on recent Intel processors. If certain
	conditions are met the BIOS can achieve a slightly higher speed than requested
	by OSPM. An example:

	scaling_cur_freq : 2933000
	cpuinfo_cur_freq : 3196000

	B) There is a round-off error associated with the cpuinfo_cur_freq value.
	Since the driver obtains the current frequency as a "percentage" (%) of the
	nominal frequency from the BIOS, sometimes, the values displayed by
	scaling_cur_freq and cpuinfo_cur_freq may not match. An example:

	scaling_cur_freq : 1600000
	cpuinfo_cur_freq : 1583000

	In this example, the nominal frequency is 2933 MHz. The driver obtains the
	current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency:

	54% of 2933 MHz = 1583 MHz

	Nominal frequency is the maximum frequency of the processor, and it usually
	corresponds to the frequency of the P0 P-state.

	2.4 related_cpus:
	-----------------
	The related_cpus field is identical to affected_cpus.

	affected_cpus : 4
	related_cpus : 4

	Currently, the PCC driver does not evaluate _PSD. The platforms that support
	PCC do not implement SW_ALL. So OSPM doesn't need to perform any coordination
	to ensure that the same frequency is requested of all dependent CPUs.

	3. Caveats:
	-----------
	The "cpufreq_stats" module in its present form cannot be loaded and
	expected to work with the PCC driver. Since the "cpufreq_stats" module
	provides information wrt each P-state, it is not applicable to the PCC driver.