|  | /* | 
|  | *  linux/drivers/scsi/esas2r/esas2r_main.c | 
|  | *      For use with ATTO ExpressSAS R6xx SAS/SATA RAID controllers | 
|  | * | 
|  | *  Copyright (c) 2001-2013 ATTO Technology, Inc. | 
|  | *  (mailto:linuxdrivers@attotech.com) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version 2 | 
|  | * of the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | 
|  | * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | 
|  | * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | 
|  | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | 
|  | * solely responsible for determining the appropriateness of using and | 
|  | * distributing the Program and assumes all risks associated with its | 
|  | * exercise of rights under this Agreement, including but not limited to | 
|  | * the risks and costs of program errors, damage to or loss of data, | 
|  | * programs or equipment, and unavailability or interruption of operations. | 
|  | * | 
|  | * DISCLAIMER OF LIABILITY | 
|  | * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | 
|  | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | 
|  | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | 
|  | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | 
|  | * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | 
|  | * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, | 
|  | * USA. | 
|  | */ | 
|  |  | 
|  | #include "esas2r.h" | 
|  |  | 
|  | MODULE_DESCRIPTION(ESAS2R_DRVR_NAME ": " ESAS2R_LONGNAME " driver"); | 
|  | MODULE_AUTHOR("ATTO Technology, Inc."); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(ESAS2R_VERSION_STR); | 
|  |  | 
|  | /* global definitions */ | 
|  |  | 
|  | static int found_adapters; | 
|  | struct esas2r_adapter *esas2r_adapters[MAX_ADAPTERS]; | 
|  |  | 
|  | #define ESAS2R_VDA_EVENT_PORT1       54414 | 
|  | #define ESAS2R_VDA_EVENT_PORT2       54415 | 
|  | #define ESAS2R_VDA_EVENT_SOCK_COUNT  2 | 
|  |  | 
|  | static struct esas2r_adapter *esas2r_adapter_from_kobj(struct kobject *kobj) | 
|  | { | 
|  | struct device *dev = container_of(kobj, struct device, kobj); | 
|  | struct Scsi_Host *host = class_to_shost(dev); | 
|  |  | 
|  | return (struct esas2r_adapter *)host->hostdata; | 
|  | } | 
|  |  | 
|  | static ssize_t read_fw(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  |  | 
|  | return esas2r_read_fw(a, buf, off, count); | 
|  | } | 
|  |  | 
|  | static ssize_t write_fw(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  |  | 
|  | return esas2r_write_fw(a, buf, off, count); | 
|  | } | 
|  |  | 
|  | static ssize_t read_fs(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  |  | 
|  | return esas2r_read_fs(a, buf, off, count); | 
|  | } | 
|  |  | 
|  | static ssize_t write_fs(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  | int length = min(sizeof(struct esas2r_ioctl_fs), count); | 
|  | int result = 0; | 
|  |  | 
|  | result = esas2r_write_fs(a, buf, off, count); | 
|  |  | 
|  | if (result < 0) | 
|  | result = 0; | 
|  |  | 
|  | return length; | 
|  | } | 
|  |  | 
|  | static ssize_t read_vda(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  |  | 
|  | return esas2r_read_vda(a, buf, off, count); | 
|  | } | 
|  |  | 
|  | static ssize_t write_vda(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  |  | 
|  | return esas2r_write_vda(a, buf, off, count); | 
|  | } | 
|  |  | 
|  | static ssize_t read_live_nvram(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  | int length = min_t(size_t, sizeof(struct esas2r_sas_nvram), PAGE_SIZE); | 
|  |  | 
|  | memcpy(buf, a->nvram, length); | 
|  | return length; | 
|  | } | 
|  |  | 
|  | static ssize_t write_live_nvram(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  | struct esas2r_request *rq; | 
|  | int result = -EFAULT; | 
|  |  | 
|  | rq = esas2r_alloc_request(a); | 
|  | if (rq == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (esas2r_write_params(a, rq, (struct esas2r_sas_nvram *)buf)) | 
|  | result = count; | 
|  |  | 
|  | esas2r_free_request(a, rq); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static ssize_t read_default_nvram(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  |  | 
|  | esas2r_nvram_get_defaults(a, (struct esas2r_sas_nvram *)buf); | 
|  |  | 
|  | return sizeof(struct esas2r_sas_nvram); | 
|  | } | 
|  |  | 
|  | static ssize_t read_hw(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  | int length = min_t(size_t, sizeof(struct atto_ioctl), PAGE_SIZE); | 
|  |  | 
|  | if (!a->local_atto_ioctl) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (handle_hba_ioctl(a, a->local_atto_ioctl) != IOCTL_SUCCESS) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memcpy(buf, a->local_atto_ioctl, length); | 
|  |  | 
|  | return length; | 
|  | } | 
|  |  | 
|  | static ssize_t write_hw(struct file *file, struct kobject *kobj, | 
|  | struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct esas2r_adapter *a = esas2r_adapter_from_kobj(kobj); | 
|  | int length = min(sizeof(struct atto_ioctl), count); | 
|  |  | 
|  | if (!a->local_atto_ioctl) { | 
|  | a->local_atto_ioctl = kmalloc(sizeof(struct atto_ioctl), | 
|  | GFP_KERNEL); | 
|  | if (a->local_atto_ioctl == NULL) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "write_hw kzalloc failed for %zu bytes", | 
|  | sizeof(struct atto_ioctl)); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | memset(a->local_atto_ioctl, 0, sizeof(struct atto_ioctl)); | 
|  | memcpy(a->local_atto_ioctl, buf, length); | 
|  |  | 
|  | return length; | 
|  | } | 
|  |  | 
|  | #define ESAS2R_RW_BIN_ATTR(_name) \ | 
|  | struct bin_attribute bin_attr_ ## _name = { \ | 
|  | .attr	= \ | 
|  | { .name = __stringify(_name), .mode  = S_IRUSR | S_IWUSR }, \ | 
|  | .size	= 0, \ | 
|  | .read	= read_ ## _name, \ | 
|  | .write	= write_ ## _name } | 
|  |  | 
|  | ESAS2R_RW_BIN_ATTR(fw); | 
|  | ESAS2R_RW_BIN_ATTR(fs); | 
|  | ESAS2R_RW_BIN_ATTR(vda); | 
|  | ESAS2R_RW_BIN_ATTR(hw); | 
|  | ESAS2R_RW_BIN_ATTR(live_nvram); | 
|  |  | 
|  | struct bin_attribute bin_attr_default_nvram = { | 
|  | .attr	= { .name = "default_nvram", .mode = S_IRUGO }, | 
|  | .size	= 0, | 
|  | .read	= read_default_nvram, | 
|  | .write	= NULL | 
|  | }; | 
|  |  | 
|  | static struct scsi_host_template driver_template = { | 
|  | .module				= THIS_MODULE, | 
|  | .show_info			= esas2r_show_info, | 
|  | .name				= ESAS2R_LONGNAME, | 
|  | .info				= esas2r_info, | 
|  | .ioctl				= esas2r_ioctl, | 
|  | .queuecommand			= esas2r_queuecommand, | 
|  | .eh_abort_handler		= esas2r_eh_abort, | 
|  | .eh_device_reset_handler	= esas2r_device_reset, | 
|  | .eh_bus_reset_handler		= esas2r_bus_reset, | 
|  | .eh_host_reset_handler		= esas2r_host_reset, | 
|  | .eh_target_reset_handler	= esas2r_target_reset, | 
|  | .can_queue			= 128, | 
|  | .this_id			= -1, | 
|  | .sg_tablesize			= SG_CHUNK_SIZE, | 
|  | .cmd_per_lun			= | 
|  | ESAS2R_DEFAULT_CMD_PER_LUN, | 
|  | .present			= 0, | 
|  | .unchecked_isa_dma		= 0, | 
|  | .emulated			= 0, | 
|  | .proc_name			= ESAS2R_DRVR_NAME, | 
|  | .change_queue_depth		= scsi_change_queue_depth, | 
|  | .max_sectors			= 0xFFFF, | 
|  | }; | 
|  |  | 
|  | int sgl_page_size = 512; | 
|  | module_param(sgl_page_size, int, 0); | 
|  | MODULE_PARM_DESC(sgl_page_size, | 
|  | "Scatter/gather list (SGL) page size in number of S/G " | 
|  | "entries.  If your application is doing a lot of very large " | 
|  | "transfers, you may want to increase the SGL page size.  " | 
|  | "Default 512."); | 
|  |  | 
|  | int num_sg_lists = 1024; | 
|  | module_param(num_sg_lists, int, 0); | 
|  | MODULE_PARM_DESC(num_sg_lists, | 
|  | "Number of scatter/gather lists.  Default 1024."); | 
|  |  | 
|  | int sg_tablesize = SG_CHUNK_SIZE; | 
|  | module_param(sg_tablesize, int, 0); | 
|  | MODULE_PARM_DESC(sg_tablesize, | 
|  | "Maximum number of entries in a scatter/gather table."); | 
|  |  | 
|  | int num_requests = 256; | 
|  | module_param(num_requests, int, 0); | 
|  | MODULE_PARM_DESC(num_requests, | 
|  | "Number of requests.  Default 256."); | 
|  |  | 
|  | int num_ae_requests = 4; | 
|  | module_param(num_ae_requests, int, 0); | 
|  | MODULE_PARM_DESC(num_ae_requests, | 
|  | "Number of VDA asynchronous event requests.  Default 4."); | 
|  |  | 
|  | int cmd_per_lun = ESAS2R_DEFAULT_CMD_PER_LUN; | 
|  | module_param(cmd_per_lun, int, 0); | 
|  | MODULE_PARM_DESC(cmd_per_lun, | 
|  | "Maximum number of commands per LUN.  Default " | 
|  | DEFINED_NUM_TO_STR(ESAS2R_DEFAULT_CMD_PER_LUN) "."); | 
|  |  | 
|  | int can_queue = 128; | 
|  | module_param(can_queue, int, 0); | 
|  | MODULE_PARM_DESC(can_queue, | 
|  | "Maximum number of commands per adapter.  Default 128."); | 
|  |  | 
|  | int esas2r_max_sectors = 0xFFFF; | 
|  | module_param(esas2r_max_sectors, int, 0); | 
|  | MODULE_PARM_DESC(esas2r_max_sectors, | 
|  | "Maximum number of disk sectors in a single data transfer.  " | 
|  | "Default 65535 (largest possible setting)."); | 
|  |  | 
|  | int interrupt_mode = 1; | 
|  | module_param(interrupt_mode, int, 0); | 
|  | MODULE_PARM_DESC(interrupt_mode, | 
|  | "Defines the interrupt mode to use.  0 for legacy" | 
|  | ", 1 for MSI.  Default is MSI (1)."); | 
|  |  | 
|  | static const struct pci_device_id | 
|  | esas2r_pci_table[] = { | 
|  | { ATTO_VENDOR_ID, 0x0049,	  ATTO_VENDOR_ID, 0x0049, | 
|  | 0, | 
|  | 0, 0 }, | 
|  | { ATTO_VENDOR_ID, 0x0049,	  ATTO_VENDOR_ID, 0x004A, | 
|  | 0, | 
|  | 0, 0 }, | 
|  | { ATTO_VENDOR_ID, 0x0049,	  ATTO_VENDOR_ID, 0x004B, | 
|  | 0, | 
|  | 0, 0 }, | 
|  | { ATTO_VENDOR_ID, 0x0049,	  ATTO_VENDOR_ID, 0x004C, | 
|  | 0, | 
|  | 0, 0 }, | 
|  | { ATTO_VENDOR_ID, 0x0049,	  ATTO_VENDOR_ID, 0x004D, | 
|  | 0, | 
|  | 0, 0 }, | 
|  | { ATTO_VENDOR_ID, 0x0049,	  ATTO_VENDOR_ID, 0x004E, | 
|  | 0, | 
|  | 0, 0 }, | 
|  | { 0,		  0,		  0,		  0, | 
|  | 0, | 
|  | 0, 0 } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, esas2r_pci_table); | 
|  |  | 
|  | static int | 
|  | esas2r_probe(struct pci_dev *pcid, const struct pci_device_id *id); | 
|  |  | 
|  | static void | 
|  | esas2r_remove(struct pci_dev *pcid); | 
|  |  | 
|  | static struct pci_driver | 
|  | esas2r_pci_driver = { | 
|  | .name		= ESAS2R_DRVR_NAME, | 
|  | .id_table	= esas2r_pci_table, | 
|  | .probe		= esas2r_probe, | 
|  | .remove		= esas2r_remove, | 
|  | .suspend	= esas2r_suspend, | 
|  | .resume		= esas2r_resume, | 
|  | }; | 
|  |  | 
|  | static int esas2r_probe(struct pci_dev *pcid, | 
|  | const struct pci_device_id *id) | 
|  | { | 
|  | struct Scsi_Host *host = NULL; | 
|  | struct esas2r_adapter *a; | 
|  | int err; | 
|  |  | 
|  | size_t host_alloc_size = sizeof(struct esas2r_adapter) | 
|  | + ((num_requests) + | 
|  | 1) * sizeof(struct esas2r_request); | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_DEBG, &(pcid->dev), | 
|  | "esas2r_probe() 0x%02x 0x%02x 0x%02x 0x%02x", | 
|  | pcid->vendor, | 
|  | pcid->device, | 
|  | pcid->subsystem_vendor, | 
|  | pcid->subsystem_device); | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(pcid->dev), | 
|  | "before pci_enable_device() " | 
|  | "enable_cnt: %d", | 
|  | pcid->enable_cnt.counter); | 
|  |  | 
|  | err = pci_enable_device(pcid); | 
|  | if (err != 0) { | 
|  | esas2r_log_dev(ESAS2R_LOG_CRIT, &(pcid->dev), | 
|  | "pci_enable_device() FAIL (%d)", | 
|  | err); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(pcid->dev), | 
|  | "pci_enable_device() OK"); | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(pcid->dev), | 
|  | "after pci_enable_device() enable_cnt: %d", | 
|  | pcid->enable_cnt.counter); | 
|  |  | 
|  | host = scsi_host_alloc(&driver_template, host_alloc_size); | 
|  | if (host == NULL) { | 
|  | esas2r_log(ESAS2R_LOG_CRIT, "scsi_host_alloc() FAIL"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | memset(host->hostdata, 0, host_alloc_size); | 
|  |  | 
|  | a = (struct esas2r_adapter *)host->hostdata; | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_INFO, "scsi_host_alloc() OK host: %p", host); | 
|  |  | 
|  | /* override max LUN and max target id */ | 
|  |  | 
|  | host->max_id = ESAS2R_MAX_ID + 1; | 
|  | host->max_lun = 255; | 
|  |  | 
|  | /* we can handle 16-byte CDbs */ | 
|  |  | 
|  | host->max_cmd_len = 16; | 
|  |  | 
|  | host->can_queue = can_queue; | 
|  | host->cmd_per_lun = cmd_per_lun; | 
|  | host->this_id = host->max_id + 1; | 
|  | host->max_channel = 0; | 
|  | host->unique_id = found_adapters; | 
|  | host->sg_tablesize = sg_tablesize; | 
|  | host->max_sectors = esas2r_max_sectors; | 
|  |  | 
|  | /* set to bus master for BIOses that don't do it for us */ | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_INFO, "pci_set_master() called"); | 
|  |  | 
|  | pci_set_master(pcid); | 
|  |  | 
|  | if (!esas2r_init_adapter(host, pcid, found_adapters)) { | 
|  | esas2r_log(ESAS2R_LOG_CRIT, | 
|  | "unable to initialize device at PCI bus %x:%x", | 
|  | pcid->bus->number, | 
|  | pcid->devfn); | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(host->shost_gendev), | 
|  | "scsi_host_put() called"); | 
|  |  | 
|  | scsi_host_put(host); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_INFO, "pci_set_drvdata(%p, %p) called", pcid, | 
|  | host->hostdata); | 
|  |  | 
|  | pci_set_drvdata(pcid, host); | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_INFO, "scsi_add_host() called"); | 
|  |  | 
|  | err = scsi_add_host(host, &pcid->dev); | 
|  |  | 
|  | if (err) { | 
|  | esas2r_log(ESAS2R_LOG_CRIT, "scsi_add_host returned %d", err); | 
|  | esas2r_log_dev(ESAS2R_LOG_CRIT, &(host->shost_gendev), | 
|  | "scsi_add_host() FAIL"); | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(host->shost_gendev), | 
|  | "scsi_host_put() called"); | 
|  |  | 
|  | scsi_host_put(host); | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(host->shost_gendev), | 
|  | "pci_set_drvdata(%p, NULL) called", | 
|  | pcid); | 
|  |  | 
|  | pci_set_drvdata(pcid, NULL); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  |  | 
|  | esas2r_fw_event_on(a); | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(host->shost_gendev), | 
|  | "scsi_scan_host() called"); | 
|  |  | 
|  | scsi_scan_host(host); | 
|  |  | 
|  | /* Add sysfs binary files */ | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, &bin_attr_fw)) | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, &(host->shost_gendev), | 
|  | "Failed to create sysfs binary file: fw"); | 
|  | else | 
|  | a->sysfs_fw_created = 1; | 
|  |  | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, &bin_attr_fs)) | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, &(host->shost_gendev), | 
|  | "Failed to create sysfs binary file: fs"); | 
|  | else | 
|  | a->sysfs_fs_created = 1; | 
|  |  | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, &bin_attr_vda)) | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, &(host->shost_gendev), | 
|  | "Failed to create sysfs binary file: vda"); | 
|  | else | 
|  | a->sysfs_vda_created = 1; | 
|  |  | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, &bin_attr_hw)) | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, &(host->shost_gendev), | 
|  | "Failed to create sysfs binary file: hw"); | 
|  | else | 
|  | a->sysfs_hw_created = 1; | 
|  |  | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, &bin_attr_live_nvram)) | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, &(host->shost_gendev), | 
|  | "Failed to create sysfs binary file: live_nvram"); | 
|  | else | 
|  | a->sysfs_live_nvram_created = 1; | 
|  |  | 
|  | if (sysfs_create_bin_file(&host->shost_dev.kobj, | 
|  | &bin_attr_default_nvram)) | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, &(host->shost_gendev), | 
|  | "Failed to create sysfs binary file: default_nvram"); | 
|  | else | 
|  | a->sysfs_default_nvram_created = 1; | 
|  |  | 
|  | found_adapters++; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void esas2r_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct Scsi_Host *host = pci_get_drvdata(pdev); | 
|  | struct esas2r_adapter *a = (struct esas2r_adapter *)host->hostdata; | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(pdev->dev), | 
|  | "esas2r_remove(%p) called; " | 
|  | "host:%p", pdev, | 
|  | host); | 
|  |  | 
|  | esas2r_kill_adapter(a->index); | 
|  | found_adapters--; | 
|  | } | 
|  |  | 
|  | static int __init esas2r_init(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_INFO, "%s called", __func__); | 
|  |  | 
|  | /* verify valid parameters */ | 
|  |  | 
|  | if (can_queue < 1) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "warning: can_queue must be at least 1, value " | 
|  | "forced."); | 
|  | can_queue = 1; | 
|  | } else if (can_queue > 2048) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "warning: can_queue must be no larger than 2048, " | 
|  | "value forced."); | 
|  | can_queue = 2048; | 
|  | } | 
|  |  | 
|  | if (cmd_per_lun < 1) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "warning: cmd_per_lun must be at least 1, value " | 
|  | "forced."); | 
|  | cmd_per_lun = 1; | 
|  | } else if (cmd_per_lun > 2048) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "warning: cmd_per_lun must be no larger than " | 
|  | "2048, value forced."); | 
|  | cmd_per_lun = 2048; | 
|  | } | 
|  |  | 
|  | if (sg_tablesize < 32) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "warning: sg_tablesize must be at least 32, " | 
|  | "value forced."); | 
|  | sg_tablesize = 32; | 
|  | } | 
|  |  | 
|  | if (esas2r_max_sectors < 1) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "warning: esas2r_max_sectors must be at least " | 
|  | "1, value forced."); | 
|  | esas2r_max_sectors = 1; | 
|  | } else if (esas2r_max_sectors > 0xffff) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "warning: esas2r_max_sectors must be no larger " | 
|  | "than 0xffff, value forced."); | 
|  | esas2r_max_sectors = 0xffff; | 
|  | } | 
|  |  | 
|  | sgl_page_size &= ~(ESAS2R_SGL_ALIGN - 1); | 
|  |  | 
|  | if (sgl_page_size < SGL_PG_SZ_MIN) | 
|  | sgl_page_size = SGL_PG_SZ_MIN; | 
|  | else if (sgl_page_size > SGL_PG_SZ_MAX) | 
|  | sgl_page_size = SGL_PG_SZ_MAX; | 
|  |  | 
|  | if (num_sg_lists < NUM_SGL_MIN) | 
|  | num_sg_lists = NUM_SGL_MIN; | 
|  | else if (num_sg_lists > NUM_SGL_MAX) | 
|  | num_sg_lists = NUM_SGL_MAX; | 
|  |  | 
|  | if (num_requests < NUM_REQ_MIN) | 
|  | num_requests = NUM_REQ_MIN; | 
|  | else if (num_requests > NUM_REQ_MAX) | 
|  | num_requests = NUM_REQ_MAX; | 
|  |  | 
|  | if (num_ae_requests < NUM_AE_MIN) | 
|  | num_ae_requests = NUM_AE_MIN; | 
|  | else if (num_ae_requests > NUM_AE_MAX) | 
|  | num_ae_requests = NUM_AE_MAX; | 
|  |  | 
|  | /* set up other globals */ | 
|  |  | 
|  | for (i = 0; i < MAX_ADAPTERS; i++) | 
|  | esas2r_adapters[i] = NULL; | 
|  |  | 
|  | return pci_register_driver(&esas2r_pci_driver); | 
|  | } | 
|  |  | 
|  | /* Handle ioctl calls to "/proc/scsi/esas2r/ATTOnode" */ | 
|  | static const struct file_operations esas2r_proc_fops = { | 
|  | .compat_ioctl	= esas2r_proc_ioctl, | 
|  | .unlocked_ioctl = esas2r_proc_ioctl, | 
|  | }; | 
|  |  | 
|  | static struct Scsi_Host *esas2r_proc_host; | 
|  | static int esas2r_proc_major; | 
|  |  | 
|  | long esas2r_proc_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | return esas2r_ioctl_handler(esas2r_proc_host->hostdata, | 
|  | (int)cmd, (void __user *)arg); | 
|  | } | 
|  |  | 
|  | static void __exit esas2r_exit(void) | 
|  | { | 
|  | esas2r_log(ESAS2R_LOG_INFO, "%s called", __func__); | 
|  |  | 
|  | if (esas2r_proc_major > 0) { | 
|  | esas2r_log(ESAS2R_LOG_INFO, "unregister proc"); | 
|  |  | 
|  | remove_proc_entry(ATTONODE_NAME, | 
|  | esas2r_proc_host->hostt->proc_dir); | 
|  | unregister_chrdev(esas2r_proc_major, ESAS2R_DRVR_NAME); | 
|  |  | 
|  | esas2r_proc_major = 0; | 
|  | } | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_INFO, "pci_unregister_driver() called"); | 
|  |  | 
|  | pci_unregister_driver(&esas2r_pci_driver); | 
|  | } | 
|  |  | 
|  | int esas2r_show_info(struct seq_file *m, struct Scsi_Host *sh) | 
|  | { | 
|  | struct esas2r_adapter *a = (struct esas2r_adapter *)sh->hostdata; | 
|  |  | 
|  | struct esas2r_target *t; | 
|  | int dev_count = 0; | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_DEBG, "esas2r_show_info (%p,%d)", m, sh->host_no); | 
|  |  | 
|  | seq_printf(m, ESAS2R_LONGNAME "\n" | 
|  | "Driver version: "ESAS2R_VERSION_STR "\n" | 
|  | "Flash version: %s\n" | 
|  | "Firmware version: %s\n" | 
|  | "Copyright "ESAS2R_COPYRIGHT_YEARS "\n" | 
|  | "http://www.attotech.com\n" | 
|  | "\n", | 
|  | a->flash_rev, | 
|  | a->fw_rev[0] ? a->fw_rev : "(none)"); | 
|  |  | 
|  |  | 
|  | seq_printf(m, "Adapter information:\n" | 
|  | "--------------------\n" | 
|  | "Model: %s\n" | 
|  | "SAS address: %02X%02X%02X%02X:%02X%02X%02X%02X\n", | 
|  | esas2r_get_model_name(a), | 
|  | a->nvram->sas_addr[0], | 
|  | a->nvram->sas_addr[1], | 
|  | a->nvram->sas_addr[2], | 
|  | a->nvram->sas_addr[3], | 
|  | a->nvram->sas_addr[4], | 
|  | a->nvram->sas_addr[5], | 
|  | a->nvram->sas_addr[6], | 
|  | a->nvram->sas_addr[7]); | 
|  |  | 
|  | seq_puts(m, "\n" | 
|  | "Discovered devices:\n" | 
|  | "\n" | 
|  | "   #  Target ID\n" | 
|  | "---------------\n"); | 
|  |  | 
|  | for (t = a->targetdb; t < a->targetdb_end; t++) | 
|  | if (t->buffered_target_state == TS_PRESENT) { | 
|  | seq_printf(m, " %3d   %3d\n", | 
|  | ++dev_count, | 
|  | (u16)(uintptr_t)(t - a->targetdb)); | 
|  | } | 
|  |  | 
|  | if (dev_count == 0) | 
|  | seq_puts(m, "none\n"); | 
|  |  | 
|  | seq_putc(m, '\n'); | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | const char *esas2r_info(struct Scsi_Host *sh) | 
|  | { | 
|  | struct esas2r_adapter *a = (struct esas2r_adapter *)sh->hostdata; | 
|  | static char esas2r_info_str[512]; | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_INFO, &(sh->shost_gendev), | 
|  | "esas2r_info() called"); | 
|  |  | 
|  | /* | 
|  | * if we haven't done so already, register as a char driver | 
|  | * and stick a node under "/proc/scsi/esas2r/ATTOnode" | 
|  | */ | 
|  |  | 
|  | if (esas2r_proc_major <= 0) { | 
|  | esas2r_proc_host = sh; | 
|  |  | 
|  | esas2r_proc_major = register_chrdev(0, ESAS2R_DRVR_NAME, | 
|  | &esas2r_proc_fops); | 
|  |  | 
|  | esas2r_log_dev(ESAS2R_LOG_DEBG, &(sh->shost_gendev), | 
|  | "register_chrdev (major %d)", | 
|  | esas2r_proc_major); | 
|  |  | 
|  | if (esas2r_proc_major > 0) { | 
|  | struct proc_dir_entry *pde; | 
|  |  | 
|  | pde = proc_create(ATTONODE_NAME, 0, | 
|  | sh->hostt->proc_dir, | 
|  | &esas2r_proc_fops); | 
|  |  | 
|  | if (!pde) { | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, | 
|  | &(sh->shost_gendev), | 
|  | "failed to create_proc_entry"); | 
|  | esas2r_proc_major = -1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | sprintf(esas2r_info_str, | 
|  | ESAS2R_LONGNAME " (bus 0x%02X, device 0x%02X, IRQ 0x%02X)" | 
|  | " driver version: "ESAS2R_VERSION_STR "  firmware version: " | 
|  | "%s\n", | 
|  | a->pcid->bus->number, a->pcid->devfn, a->pcid->irq, | 
|  | a->fw_rev[0] ? a->fw_rev : "(none)"); | 
|  |  | 
|  | return esas2r_info_str; | 
|  | } | 
|  |  | 
|  | /* Callback for building a request scatter/gather list */ | 
|  | static u32 get_physaddr_from_sgc(struct esas2r_sg_context *sgc, u64 *addr) | 
|  | { | 
|  | u32 len; | 
|  |  | 
|  | if (likely(sgc->cur_offset == sgc->exp_offset)) { | 
|  | /* | 
|  | * the normal case: caller used all bytes from previous call, so | 
|  | * expected offset is the same as the current offset. | 
|  | */ | 
|  |  | 
|  | if (sgc->sgel_count < sgc->num_sgel) { | 
|  | /* retrieve next segment, except for first time */ | 
|  | if (sgc->exp_offset > (u8 *)0) { | 
|  | /* advance current segment */ | 
|  | sgc->cur_sgel = sg_next(sgc->cur_sgel); | 
|  | ++(sgc->sgel_count); | 
|  | } | 
|  |  | 
|  |  | 
|  | len = sg_dma_len(sgc->cur_sgel); | 
|  | (*addr) = sg_dma_address(sgc->cur_sgel); | 
|  |  | 
|  | /* save the total # bytes returned to caller so far */ | 
|  | sgc->exp_offset += len; | 
|  |  | 
|  | } else { | 
|  | len = 0; | 
|  | } | 
|  | } else if (sgc->cur_offset < sgc->exp_offset) { | 
|  | /* | 
|  | * caller did not use all bytes from previous call. need to | 
|  | * compute the address based on current segment. | 
|  | */ | 
|  |  | 
|  | len = sg_dma_len(sgc->cur_sgel); | 
|  | (*addr) = sg_dma_address(sgc->cur_sgel); | 
|  |  | 
|  | sgc->exp_offset -= len; | 
|  |  | 
|  | /* calculate PA based on prev segment address and offsets */ | 
|  | *addr = *addr + | 
|  | (sgc->cur_offset - sgc->exp_offset); | 
|  |  | 
|  | sgc->exp_offset += len; | 
|  |  | 
|  | /* re-calculate length based on offset */ | 
|  | len = lower_32_bits( | 
|  | sgc->exp_offset - sgc->cur_offset); | 
|  | } else {   /* if ( sgc->cur_offset > sgc->exp_offset ) */ | 
|  | /* | 
|  | * we don't expect the caller to skip ahead. | 
|  | * cur_offset will never exceed the len we return | 
|  | */ | 
|  | len = 0; | 
|  | } | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | int esas2r_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct esas2r_adapter *a = | 
|  | (struct esas2r_adapter *)cmd->device->host->hostdata; | 
|  | struct esas2r_request *rq; | 
|  | struct esas2r_sg_context sgc; | 
|  | unsigned bufflen; | 
|  |  | 
|  | /* Assume success, if it fails we will fix the result later. */ | 
|  | cmd->result = DID_OK << 16; | 
|  |  | 
|  | if (unlikely(test_bit(AF_DEGRADED_MODE, &a->flags))) { | 
|  | cmd->result = DID_NO_CONNECT << 16; | 
|  | cmd->scsi_done(cmd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | rq = esas2r_alloc_request(a); | 
|  | if (unlikely(rq == NULL)) { | 
|  | esas2r_debug("esas2r_alloc_request failed"); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | rq->cmd = cmd; | 
|  | bufflen = scsi_bufflen(cmd); | 
|  |  | 
|  | if (likely(bufflen != 0)) { | 
|  | if (cmd->sc_data_direction == DMA_TO_DEVICE) | 
|  | rq->vrq->scsi.flags |= cpu_to_le32(FCP_CMND_WRD); | 
|  | else if (cmd->sc_data_direction == DMA_FROM_DEVICE) | 
|  | rq->vrq->scsi.flags |= cpu_to_le32(FCP_CMND_RDD); | 
|  | } | 
|  |  | 
|  | memcpy(rq->vrq->scsi.cdb, cmd->cmnd, cmd->cmd_len); | 
|  | rq->vrq->scsi.length = cpu_to_le32(bufflen); | 
|  | rq->target_id = cmd->device->id; | 
|  | rq->vrq->scsi.flags |= cpu_to_le32(cmd->device->lun); | 
|  | rq->sense_buf = cmd->sense_buffer; | 
|  | rq->sense_len = SCSI_SENSE_BUFFERSIZE; | 
|  |  | 
|  | esas2r_sgc_init(&sgc, a, rq, NULL); | 
|  |  | 
|  | sgc.length = bufflen; | 
|  | sgc.cur_offset = NULL; | 
|  |  | 
|  | sgc.cur_sgel = scsi_sglist(cmd); | 
|  | sgc.exp_offset = NULL; | 
|  | sgc.num_sgel = scsi_dma_map(cmd); | 
|  | sgc.sgel_count = 0; | 
|  |  | 
|  | if (unlikely(sgc.num_sgel < 0)) { | 
|  | esas2r_free_request(a, rq); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | sgc.get_phys_addr = (PGETPHYSADDR)get_physaddr_from_sgc; | 
|  |  | 
|  | if (unlikely(!esas2r_build_sg_list(a, rq, &sgc))) { | 
|  | scsi_dma_unmap(cmd); | 
|  | esas2r_free_request(a, rq); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | esas2r_debug("start request %p to %d:%d\n", rq, (int)cmd->device->id, | 
|  | (int)cmd->device->lun); | 
|  |  | 
|  | esas2r_start_request(a, rq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void complete_task_management_request(struct esas2r_adapter *a, | 
|  | struct esas2r_request *rq) | 
|  | { | 
|  | (*rq->task_management_status_ptr) = rq->req_stat; | 
|  | esas2r_free_request(a, rq); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Searches the specified queue for the specified queue for the command | 
|  | * to abort. | 
|  | * | 
|  | * @param [in] a | 
|  | * @param [in] abort_request | 
|  | * @param [in] cmd | 
|  | * t | 
|  | * @return 0 on failure, 1 if command was not found, 2 if command was found | 
|  | */ | 
|  | static int esas2r_check_active_queue(struct esas2r_adapter *a, | 
|  | struct esas2r_request **abort_request, | 
|  | struct scsi_cmnd *cmd, | 
|  | struct list_head *queue) | 
|  | { | 
|  | bool found = false; | 
|  | struct esas2r_request *ar = *abort_request; | 
|  | struct esas2r_request *rq; | 
|  | struct list_head *element, *next; | 
|  |  | 
|  | list_for_each_safe(element, next, queue) { | 
|  |  | 
|  | rq = list_entry(element, struct esas2r_request, req_list); | 
|  |  | 
|  | if (rq->cmd == cmd) { | 
|  |  | 
|  | /* Found the request.  See what to do with it. */ | 
|  | if (queue == &a->active_list) { | 
|  | /* | 
|  | * We are searching the active queue, which | 
|  | * means that we need to send an abort request | 
|  | * to the firmware. | 
|  | */ | 
|  | ar = esas2r_alloc_request(a); | 
|  | if (ar == NULL) { | 
|  | esas2r_log_dev(ESAS2R_LOG_WARN, | 
|  | &(a->host->shost_gendev), | 
|  | "unable to allocate an abort request for cmd %p", | 
|  | cmd); | 
|  | return 0; /* Failure */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Task management request must be formatted | 
|  | * with a lock held. | 
|  | */ | 
|  | ar->sense_len = 0; | 
|  | ar->vrq->scsi.length = 0; | 
|  | ar->target_id = rq->target_id; | 
|  | ar->vrq->scsi.flags |= cpu_to_le32( | 
|  | (u8)le32_to_cpu(rq->vrq->scsi.flags)); | 
|  |  | 
|  | memset(ar->vrq->scsi.cdb, 0, | 
|  | sizeof(ar->vrq->scsi.cdb)); | 
|  |  | 
|  | ar->vrq->scsi.flags |= cpu_to_le32( | 
|  | FCP_CMND_TRM); | 
|  | ar->vrq->scsi.u.abort_handle = | 
|  | rq->vrq->scsi.handle; | 
|  | } else { | 
|  | /* | 
|  | * The request is pending but not active on | 
|  | * the firmware.  Just free it now and we'll | 
|  | * report the successful abort below. | 
|  | */ | 
|  | list_del_init(&rq->req_list); | 
|  | esas2r_free_request(a, rq); | 
|  | } | 
|  |  | 
|  | found = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | if (!found) | 
|  | return 1;       /* Not found */ | 
|  |  | 
|  | return 2;               /* found */ | 
|  |  | 
|  |  | 
|  | } | 
|  |  | 
|  | int esas2r_eh_abort(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct esas2r_adapter *a = | 
|  | (struct esas2r_adapter *)cmd->device->host->hostdata; | 
|  | struct esas2r_request *abort_request = NULL; | 
|  | unsigned long flags; | 
|  | struct list_head *queue; | 
|  | int result; | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_INFO, "eh_abort (%p)", cmd); | 
|  |  | 
|  | if (test_bit(AF_DEGRADED_MODE, &a->flags)) { | 
|  | cmd->result = DID_ABORT << 16; | 
|  |  | 
|  | scsi_set_resid(cmd, 0); | 
|  |  | 
|  | cmd->scsi_done(cmd); | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&a->queue_lock, flags); | 
|  |  | 
|  | /* | 
|  | * Run through the defer and active queues looking for the request | 
|  | * to abort. | 
|  | */ | 
|  |  | 
|  | queue = &a->defer_list; | 
|  |  | 
|  | check_active_queue: | 
|  |  | 
|  | result = esas2r_check_active_queue(a, &abort_request, cmd, queue); | 
|  |  | 
|  | if (!result) { | 
|  | spin_unlock_irqrestore(&a->queue_lock, flags); | 
|  | return FAILED; | 
|  | } else if (result == 2 && (queue == &a->defer_list)) { | 
|  | queue = &a->active_list; | 
|  | goto check_active_queue; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&a->queue_lock, flags); | 
|  |  | 
|  | if (abort_request) { | 
|  | u8 task_management_status = RS_PENDING; | 
|  |  | 
|  | /* | 
|  | * the request is already active, so we need to tell | 
|  | * the firmware to abort it and wait for the response. | 
|  | */ | 
|  |  | 
|  | abort_request->comp_cb = complete_task_management_request; | 
|  | abort_request->task_management_status_ptr = | 
|  | &task_management_status; | 
|  |  | 
|  | esas2r_start_request(a, abort_request); | 
|  |  | 
|  | if (atomic_read(&a->disable_cnt) == 0) | 
|  | esas2r_do_deferred_processes(a); | 
|  |  | 
|  | while (task_management_status == RS_PENDING) | 
|  | msleep(10); | 
|  |  | 
|  | /* | 
|  | * Once we get here, the original request will have been | 
|  | * completed by the firmware and the abort request will have | 
|  | * been cleaned up.  we're done! | 
|  | */ | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we get here, either we found the inactive request and | 
|  | * freed it, or we didn't find it at all.  Either way, success! | 
|  | */ | 
|  |  | 
|  | cmd->result = DID_ABORT << 16; | 
|  |  | 
|  | scsi_set_resid(cmd, 0); | 
|  |  | 
|  | cmd->scsi_done(cmd); | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static int esas2r_host_bus_reset(struct scsi_cmnd *cmd, bool host_reset) | 
|  | { | 
|  | struct esas2r_adapter *a = | 
|  | (struct esas2r_adapter *)cmd->device->host->hostdata; | 
|  |  | 
|  | if (test_bit(AF_DEGRADED_MODE, &a->flags)) | 
|  | return FAILED; | 
|  |  | 
|  | if (host_reset) | 
|  | esas2r_reset_adapter(a); | 
|  | else | 
|  | esas2r_reset_bus(a); | 
|  |  | 
|  | /* above call sets the AF_OS_RESET flag.  wait for it to clear. */ | 
|  |  | 
|  | while (test_bit(AF_OS_RESET, &a->flags)) { | 
|  | msleep(10); | 
|  |  | 
|  | if (test_bit(AF_DEGRADED_MODE, &a->flags)) | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | if (test_bit(AF_DEGRADED_MODE, &a->flags)) | 
|  | return FAILED; | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | int esas2r_host_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | esas2r_log(ESAS2R_LOG_INFO, "host_reset (%p)", cmd); | 
|  |  | 
|  | return esas2r_host_bus_reset(cmd, true); | 
|  | } | 
|  |  | 
|  | int esas2r_bus_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | esas2r_log(ESAS2R_LOG_INFO, "bus_reset (%p)", cmd); | 
|  |  | 
|  | return esas2r_host_bus_reset(cmd, false); | 
|  | } | 
|  |  | 
|  | static int esas2r_dev_targ_reset(struct scsi_cmnd *cmd, bool target_reset) | 
|  | { | 
|  | struct esas2r_adapter *a = | 
|  | (struct esas2r_adapter *)cmd->device->host->hostdata; | 
|  | struct esas2r_request *rq; | 
|  | u8 task_management_status = RS_PENDING; | 
|  | bool completed; | 
|  |  | 
|  | if (test_bit(AF_DEGRADED_MODE, &a->flags)) | 
|  | return FAILED; | 
|  |  | 
|  | retry: | 
|  | rq = esas2r_alloc_request(a); | 
|  | if (rq == NULL) { | 
|  | if (target_reset) { | 
|  | esas2r_log(ESAS2R_LOG_CRIT, | 
|  | "unable to allocate a request for a " | 
|  | "target reset (%d)!", | 
|  | cmd->device->id); | 
|  | } else { | 
|  | esas2r_log(ESAS2R_LOG_CRIT, | 
|  | "unable to allocate a request for a " | 
|  | "device reset (%d:%llu)!", | 
|  | cmd->device->id, | 
|  | cmd->device->lun); | 
|  | } | 
|  |  | 
|  |  | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | rq->target_id = cmd->device->id; | 
|  | rq->vrq->scsi.flags |= cpu_to_le32(cmd->device->lun); | 
|  | rq->req_stat = RS_PENDING; | 
|  |  | 
|  | rq->comp_cb = complete_task_management_request; | 
|  | rq->task_management_status_ptr = &task_management_status; | 
|  |  | 
|  | if (target_reset) { | 
|  | esas2r_debug("issuing target reset (%p) to id %d", rq, | 
|  | cmd->device->id); | 
|  | completed = esas2r_send_task_mgmt(a, rq, 0x20); | 
|  | } else { | 
|  | esas2r_debug("issuing device reset (%p) to id %d lun %d", rq, | 
|  | cmd->device->id, cmd->device->lun); | 
|  | completed = esas2r_send_task_mgmt(a, rq, 0x10); | 
|  | } | 
|  |  | 
|  | if (completed) { | 
|  | /* Task management cmd completed right away, need to free it. */ | 
|  |  | 
|  | esas2r_free_request(a, rq); | 
|  | } else { | 
|  | /* | 
|  | * Wait for firmware to complete the request.  Completion | 
|  | * callback will free it. | 
|  | */ | 
|  | while (task_management_status == RS_PENDING) | 
|  | msleep(10); | 
|  | } | 
|  |  | 
|  | if (test_bit(AF_DEGRADED_MODE, &a->flags)) | 
|  | return FAILED; | 
|  |  | 
|  | if (task_management_status == RS_BUSY) { | 
|  | /* | 
|  | * Busy, probably because we are flashing.  Wait a bit and | 
|  | * try again. | 
|  | */ | 
|  | msleep(100); | 
|  | goto retry; | 
|  | } | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | int esas2r_device_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | esas2r_log(ESAS2R_LOG_INFO, "device_reset (%p)", cmd); | 
|  |  | 
|  | return esas2r_dev_targ_reset(cmd, false); | 
|  |  | 
|  | } | 
|  |  | 
|  | int esas2r_target_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | esas2r_log(ESAS2R_LOG_INFO, "target_reset (%p)", cmd); | 
|  |  | 
|  | return esas2r_dev_targ_reset(cmd, true); | 
|  | } | 
|  |  | 
|  | void esas2r_log_request_failure(struct esas2r_adapter *a, | 
|  | struct esas2r_request *rq) | 
|  | { | 
|  | u8 reqstatus = rq->req_stat; | 
|  |  | 
|  | if (reqstatus == RS_SUCCESS) | 
|  | return; | 
|  |  | 
|  | if (rq->vrq->scsi.function == VDA_FUNC_SCSI) { | 
|  | if (reqstatus == RS_SCSI_ERROR) { | 
|  | if (rq->func_rsp.scsi_rsp.sense_len >= 13) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "request failure - SCSI error %x ASC:%x ASCQ:%x CDB:%x", | 
|  | rq->sense_buf[2], rq->sense_buf[12], | 
|  | rq->sense_buf[13], | 
|  | rq->vrq->scsi.cdb[0]); | 
|  | } else { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "request failure - SCSI error CDB:%x\n", | 
|  | rq->vrq->scsi.cdb[0]); | 
|  | } | 
|  | } else if ((rq->vrq->scsi.cdb[0] != INQUIRY | 
|  | && rq->vrq->scsi.cdb[0] != REPORT_LUNS) | 
|  | || (reqstatus != RS_SEL | 
|  | && reqstatus != RS_SEL2)) { | 
|  | if ((reqstatus == RS_UNDERRUN) && | 
|  | (rq->vrq->scsi.cdb[0] == INQUIRY)) { | 
|  | /* Don't log inquiry underruns */ | 
|  | } else { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "request failure - cdb:%x reqstatus:%d target:%d", | 
|  | rq->vrq->scsi.cdb[0], reqstatus, | 
|  | rq->target_id); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void esas2r_wait_request(struct esas2r_adapter *a, struct esas2r_request *rq) | 
|  | { | 
|  | u32 starttime; | 
|  | u32 timeout; | 
|  |  | 
|  | starttime = jiffies_to_msecs(jiffies); | 
|  | timeout = rq->timeout ? rq->timeout : 5000; | 
|  |  | 
|  | while (true) { | 
|  | esas2r_polled_interrupt(a); | 
|  |  | 
|  | if (rq->req_stat != RS_STARTED) | 
|  | break; | 
|  |  | 
|  | schedule_timeout_interruptible(msecs_to_jiffies(100)); | 
|  |  | 
|  | if ((jiffies_to_msecs(jiffies) - starttime) > timeout) { | 
|  | esas2r_hdebug("request TMO"); | 
|  | esas2r_bugon(); | 
|  |  | 
|  | rq->req_stat = RS_TIMEOUT; | 
|  |  | 
|  | esas2r_local_reset_adapter(a); | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | u32 esas2r_map_data_window(struct esas2r_adapter *a, u32 addr_lo) | 
|  | { | 
|  | u32 offset = addr_lo & (MW_DATA_WINDOW_SIZE - 1); | 
|  | u32 base = addr_lo & -(signed int)MW_DATA_WINDOW_SIZE; | 
|  |  | 
|  | if (a->window_base != base) { | 
|  | esas2r_write_register_dword(a, MVR_PCI_WIN1_REMAP, | 
|  | base | MVRPW1R_ENABLE); | 
|  | esas2r_flush_register_dword(a, MVR_PCI_WIN1_REMAP); | 
|  | a->window_base = base; | 
|  | } | 
|  |  | 
|  | return offset; | 
|  | } | 
|  |  | 
|  | /* Read a block of data from chip memory */ | 
|  | bool esas2r_read_mem_block(struct esas2r_adapter *a, | 
|  | void *to, | 
|  | u32 from, | 
|  | u32 size) | 
|  | { | 
|  | u8 *end = (u8 *)to; | 
|  |  | 
|  | while (size) { | 
|  | u32 len; | 
|  | u32 offset; | 
|  | u32 iatvr; | 
|  |  | 
|  | iatvr = (from & -(signed int)MW_DATA_WINDOW_SIZE); | 
|  |  | 
|  | esas2r_map_data_window(a, iatvr); | 
|  |  | 
|  | offset = from & (MW_DATA_WINDOW_SIZE - 1); | 
|  | len = size; | 
|  |  | 
|  | if (len > MW_DATA_WINDOW_SIZE - offset) | 
|  | len = MW_DATA_WINDOW_SIZE - offset; | 
|  |  | 
|  | from += len; | 
|  | size -= len; | 
|  |  | 
|  | while (len--) { | 
|  | *end++ = esas2r_read_data_byte(a, offset); | 
|  | offset++; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | void esas2r_nuxi_mgt_data(u8 function, void *data) | 
|  | { | 
|  | struct atto_vda_grp_info *g; | 
|  | struct atto_vda_devinfo *d; | 
|  | struct atto_vdapart_info *p; | 
|  | struct atto_vda_dh_info *h; | 
|  | struct atto_vda_metrics_info *m; | 
|  | struct atto_vda_schedule_info *s; | 
|  | struct atto_vda_buzzer_info *b; | 
|  | u8 i; | 
|  |  | 
|  | switch (function) { | 
|  | case VDAMGT_BUZZER_INFO: | 
|  | case VDAMGT_BUZZER_SET: | 
|  |  | 
|  | b = (struct atto_vda_buzzer_info *)data; | 
|  |  | 
|  | b->duration = le32_to_cpu(b->duration); | 
|  | break; | 
|  |  | 
|  | case VDAMGT_SCHEDULE_INFO: | 
|  | case VDAMGT_SCHEDULE_EVENT: | 
|  |  | 
|  | s = (struct atto_vda_schedule_info *)data; | 
|  |  | 
|  | s->id = le32_to_cpu(s->id); | 
|  |  | 
|  | break; | 
|  |  | 
|  | case VDAMGT_DEV_INFO: | 
|  | case VDAMGT_DEV_CLEAN: | 
|  | case VDAMGT_DEV_PT_INFO: | 
|  | case VDAMGT_DEV_FEATURES: | 
|  | case VDAMGT_DEV_PT_FEATURES: | 
|  | case VDAMGT_DEV_OPERATION: | 
|  |  | 
|  | d = (struct atto_vda_devinfo *)data; | 
|  |  | 
|  | d->capacity = le64_to_cpu(d->capacity); | 
|  | d->block_size = le32_to_cpu(d->block_size); | 
|  | d->ses_dev_index = le16_to_cpu(d->ses_dev_index); | 
|  | d->target_id = le16_to_cpu(d->target_id); | 
|  | d->lun = le16_to_cpu(d->lun); | 
|  | d->features = le16_to_cpu(d->features); | 
|  | break; | 
|  |  | 
|  | case VDAMGT_GRP_INFO: | 
|  | case VDAMGT_GRP_CREATE: | 
|  | case VDAMGT_GRP_DELETE: | 
|  | case VDAMGT_ADD_STORAGE: | 
|  | case VDAMGT_MEMBER_ADD: | 
|  | case VDAMGT_GRP_COMMIT: | 
|  | case VDAMGT_GRP_REBUILD: | 
|  | case VDAMGT_GRP_COMMIT_INIT: | 
|  | case VDAMGT_QUICK_RAID: | 
|  | case VDAMGT_GRP_FEATURES: | 
|  | case VDAMGT_GRP_COMMIT_INIT_AUTOMAP: | 
|  | case VDAMGT_QUICK_RAID_INIT_AUTOMAP: | 
|  | case VDAMGT_SPARE_LIST: | 
|  | case VDAMGT_SPARE_ADD: | 
|  | case VDAMGT_SPARE_REMOVE: | 
|  | case VDAMGT_LOCAL_SPARE_ADD: | 
|  | case VDAMGT_GRP_OPERATION: | 
|  |  | 
|  | g = (struct atto_vda_grp_info *)data; | 
|  |  | 
|  | g->capacity = le64_to_cpu(g->capacity); | 
|  | g->block_size = le32_to_cpu(g->block_size); | 
|  | g->interleave = le32_to_cpu(g->interleave); | 
|  | g->features = le16_to_cpu(g->features); | 
|  |  | 
|  | for (i = 0; i < 32; i++) | 
|  | g->members[i] = le16_to_cpu(g->members[i]); | 
|  |  | 
|  | break; | 
|  |  | 
|  | case VDAMGT_PART_INFO: | 
|  | case VDAMGT_PART_MAP: | 
|  | case VDAMGT_PART_UNMAP: | 
|  | case VDAMGT_PART_AUTOMAP: | 
|  | case VDAMGT_PART_SPLIT: | 
|  | case VDAMGT_PART_MERGE: | 
|  |  | 
|  | p = (struct atto_vdapart_info *)data; | 
|  |  | 
|  | p->part_size = le64_to_cpu(p->part_size); | 
|  | p->start_lba = le32_to_cpu(p->start_lba); | 
|  | p->block_size = le32_to_cpu(p->block_size); | 
|  | p->target_id = le16_to_cpu(p->target_id); | 
|  | break; | 
|  |  | 
|  | case VDAMGT_DEV_HEALTH_REQ: | 
|  |  | 
|  | h = (struct atto_vda_dh_info *)data; | 
|  |  | 
|  | h->med_defect_cnt = le32_to_cpu(h->med_defect_cnt); | 
|  | h->info_exc_cnt = le32_to_cpu(h->info_exc_cnt); | 
|  | break; | 
|  |  | 
|  | case VDAMGT_DEV_METRICS: | 
|  |  | 
|  | m = (struct atto_vda_metrics_info *)data; | 
|  |  | 
|  | for (i = 0; i < 32; i++) | 
|  | m->dev_indexes[i] = le16_to_cpu(m->dev_indexes[i]); | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void esas2r_nuxi_cfg_data(u8 function, void *data) | 
|  | { | 
|  | struct atto_vda_cfg_init *ci; | 
|  |  | 
|  | switch (function) { | 
|  | case VDA_CFG_INIT: | 
|  | case VDA_CFG_GET_INIT: | 
|  | case VDA_CFG_GET_INIT2: | 
|  |  | 
|  | ci = (struct atto_vda_cfg_init *)data; | 
|  |  | 
|  | ci->date_time.year = le16_to_cpu(ci->date_time.year); | 
|  | ci->sgl_page_size = le32_to_cpu(ci->sgl_page_size); | 
|  | ci->vda_version = le32_to_cpu(ci->vda_version); | 
|  | ci->epoch_time = le32_to_cpu(ci->epoch_time); | 
|  | ci->ioctl_tunnel = le32_to_cpu(ci->ioctl_tunnel); | 
|  | ci->num_targets_backend = le32_to_cpu(ci->num_targets_backend); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void esas2r_nuxi_ae_data(union atto_vda_ae *ae) | 
|  | { | 
|  | struct atto_vda_ae_raid *r = &ae->raid; | 
|  | struct atto_vda_ae_lu *l = &ae->lu; | 
|  |  | 
|  | switch (ae->hdr.bytype) { | 
|  | case VDAAE_HDR_TYPE_RAID: | 
|  |  | 
|  | r->dwflags = le32_to_cpu(r->dwflags); | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_LU: | 
|  |  | 
|  | l->dwevent = le32_to_cpu(l->dwevent); | 
|  | l->wphys_target_id = le16_to_cpu(l->wphys_target_id); | 
|  | l->id.tgtlun.wtarget_id = le16_to_cpu(l->id.tgtlun.wtarget_id); | 
|  |  | 
|  | if (l->hdr.bylength >= offsetof(struct atto_vda_ae_lu, id) | 
|  | + sizeof(struct atto_vda_ae_lu_tgt_lun_raid)) { | 
|  | l->id.tgtlun_raid.dwinterleave | 
|  | = le32_to_cpu(l->id.tgtlun_raid.dwinterleave); | 
|  | l->id.tgtlun_raid.dwblock_size | 
|  | = le32_to_cpu(l->id.tgtlun_raid.dwblock_size); | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_DISK: | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void esas2r_free_request(struct esas2r_adapter *a, struct esas2r_request *rq) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | esas2r_rq_destroy_request(rq, a); | 
|  | spin_lock_irqsave(&a->request_lock, flags); | 
|  | list_add(&rq->comp_list, &a->avail_request); | 
|  | spin_unlock_irqrestore(&a->request_lock, flags); | 
|  | } | 
|  |  | 
|  | struct esas2r_request *esas2r_alloc_request(struct esas2r_adapter *a) | 
|  | { | 
|  | struct esas2r_request *rq; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&a->request_lock, flags); | 
|  |  | 
|  | if (unlikely(list_empty(&a->avail_request))) { | 
|  | spin_unlock_irqrestore(&a->request_lock, flags); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | rq = list_first_entry(&a->avail_request, struct esas2r_request, | 
|  | comp_list); | 
|  | list_del(&rq->comp_list); | 
|  | spin_unlock_irqrestore(&a->request_lock, flags); | 
|  | esas2r_rq_init_request(rq, a); | 
|  |  | 
|  | return rq; | 
|  |  | 
|  | } | 
|  |  | 
|  | void esas2r_complete_request_cb(struct esas2r_adapter *a, | 
|  | struct esas2r_request *rq) | 
|  | { | 
|  | esas2r_debug("completing request %p\n", rq); | 
|  |  | 
|  | scsi_dma_unmap(rq->cmd); | 
|  |  | 
|  | if (unlikely(rq->req_stat != RS_SUCCESS)) { | 
|  | esas2r_debug("[%x STATUS %x:%x (%x)]", rq->target_id, | 
|  | rq->req_stat, | 
|  | rq->func_rsp.scsi_rsp.scsi_stat, | 
|  | rq->cmd); | 
|  |  | 
|  | rq->cmd->result = | 
|  | ((esas2r_req_status_to_error(rq->req_stat) << 16) | 
|  | | (rq->func_rsp.scsi_rsp.scsi_stat & STATUS_MASK)); | 
|  |  | 
|  | if (rq->req_stat == RS_UNDERRUN) | 
|  | scsi_set_resid(rq->cmd, | 
|  | le32_to_cpu(rq->func_rsp.scsi_rsp. | 
|  | residual_length)); | 
|  | else | 
|  | scsi_set_resid(rq->cmd, 0); | 
|  | } | 
|  |  | 
|  | rq->cmd->scsi_done(rq->cmd); | 
|  |  | 
|  | esas2r_free_request(a, rq); | 
|  | } | 
|  |  | 
|  | /* Run tasklet to handle stuff outside of interrupt context. */ | 
|  | void esas2r_adapter_tasklet(unsigned long context) | 
|  | { | 
|  | struct esas2r_adapter *a = (struct esas2r_adapter *)context; | 
|  |  | 
|  | if (unlikely(test_bit(AF2_TIMER_TICK, &a->flags2))) { | 
|  | clear_bit(AF2_TIMER_TICK, &a->flags2); | 
|  | esas2r_timer_tick(a); | 
|  | } | 
|  |  | 
|  | if (likely(test_bit(AF2_INT_PENDING, &a->flags2))) { | 
|  | clear_bit(AF2_INT_PENDING, &a->flags2); | 
|  | esas2r_adapter_interrupt(a); | 
|  | } | 
|  |  | 
|  | if (esas2r_is_tasklet_pending(a)) | 
|  | esas2r_do_tasklet_tasks(a); | 
|  |  | 
|  | if (esas2r_is_tasklet_pending(a) | 
|  | || (test_bit(AF2_INT_PENDING, &a->flags2)) | 
|  | || (test_bit(AF2_TIMER_TICK, &a->flags2))) { | 
|  | clear_bit(AF_TASKLET_SCHEDULED, &a->flags); | 
|  | esas2r_schedule_tasklet(a); | 
|  | } else { | 
|  | clear_bit(AF_TASKLET_SCHEDULED, &a->flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void esas2r_timer_callback(struct timer_list *t); | 
|  |  | 
|  | void esas2r_kickoff_timer(struct esas2r_adapter *a) | 
|  | { | 
|  | timer_setup(&a->timer, esas2r_timer_callback, 0); | 
|  |  | 
|  | a->timer.expires = jiffies + | 
|  | msecs_to_jiffies(100); | 
|  |  | 
|  | add_timer(&a->timer); | 
|  | } | 
|  |  | 
|  | static void esas2r_timer_callback(struct timer_list *t) | 
|  | { | 
|  | struct esas2r_adapter *a = from_timer(a, t, timer); | 
|  |  | 
|  | set_bit(AF2_TIMER_TICK, &a->flags2); | 
|  |  | 
|  | esas2r_schedule_tasklet(a); | 
|  |  | 
|  | esas2r_kickoff_timer(a); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Firmware events need to be handled outside of interrupt context | 
|  | * so we schedule a delayed_work to handle them. | 
|  | */ | 
|  |  | 
|  | static void | 
|  | esas2r_free_fw_event(struct esas2r_fw_event_work *fw_event) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct esas2r_adapter *a = fw_event->a; | 
|  |  | 
|  | spin_lock_irqsave(&a->fw_event_lock, flags); | 
|  | list_del(&fw_event->list); | 
|  | kfree(fw_event); | 
|  | spin_unlock_irqrestore(&a->fw_event_lock, flags); | 
|  | } | 
|  |  | 
|  | void | 
|  | esas2r_fw_event_off(struct esas2r_adapter *a) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&a->fw_event_lock, flags); | 
|  | a->fw_events_off = 1; | 
|  | spin_unlock_irqrestore(&a->fw_event_lock, flags); | 
|  | } | 
|  |  | 
|  | void | 
|  | esas2r_fw_event_on(struct esas2r_adapter *a) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&a->fw_event_lock, flags); | 
|  | a->fw_events_off = 0; | 
|  | spin_unlock_irqrestore(&a->fw_event_lock, flags); | 
|  | } | 
|  |  | 
|  | static void esas2r_add_device(struct esas2r_adapter *a, u16 target_id) | 
|  | { | 
|  | int ret; | 
|  | struct scsi_device *scsi_dev; | 
|  |  | 
|  | scsi_dev = scsi_device_lookup(a->host, 0, target_id, 0); | 
|  |  | 
|  | if (scsi_dev) { | 
|  | esas2r_log_dev( | 
|  | ESAS2R_LOG_WARN, | 
|  | &(scsi_dev-> | 
|  | sdev_gendev), | 
|  | "scsi device already exists at id %d", target_id); | 
|  |  | 
|  | scsi_device_put(scsi_dev); | 
|  | } else { | 
|  | esas2r_log_dev( | 
|  | ESAS2R_LOG_INFO, | 
|  | &(a->host-> | 
|  | shost_gendev), | 
|  | "scsi_add_device() called for 0:%d:0", | 
|  | target_id); | 
|  |  | 
|  | ret = scsi_add_device(a->host, 0, target_id, 0); | 
|  | if (ret) { | 
|  | esas2r_log_dev( | 
|  | ESAS2R_LOG_CRIT, | 
|  | &(a->host-> | 
|  | shost_gendev), | 
|  | "scsi_add_device failed with %d for id %d", | 
|  | ret, target_id); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void esas2r_remove_device(struct esas2r_adapter *a, u16 target_id) | 
|  | { | 
|  | struct scsi_device *scsi_dev; | 
|  |  | 
|  | scsi_dev = scsi_device_lookup(a->host, 0, target_id, 0); | 
|  |  | 
|  | if (scsi_dev) { | 
|  | scsi_device_set_state(scsi_dev, SDEV_OFFLINE); | 
|  |  | 
|  | esas2r_log_dev( | 
|  | ESAS2R_LOG_INFO, | 
|  | &(scsi_dev-> | 
|  | sdev_gendev), | 
|  | "scsi_remove_device() called for 0:%d:0", | 
|  | target_id); | 
|  |  | 
|  | scsi_remove_device(scsi_dev); | 
|  |  | 
|  | esas2r_log_dev( | 
|  | ESAS2R_LOG_INFO, | 
|  | &(scsi_dev-> | 
|  | sdev_gendev), | 
|  | "scsi_device_put() called"); | 
|  |  | 
|  | scsi_device_put(scsi_dev); | 
|  | } else { | 
|  | esas2r_log_dev( | 
|  | ESAS2R_LOG_WARN, | 
|  | &(a->host->shost_gendev), | 
|  | "no target found at id %d", | 
|  | target_id); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sends a firmware asynchronous event to anyone who happens to be | 
|  | * listening on the defined ATTO VDA event ports. | 
|  | */ | 
|  | static void esas2r_send_ae_event(struct esas2r_fw_event_work *fw_event) | 
|  | { | 
|  | struct esas2r_vda_ae *ae = (struct esas2r_vda_ae *)fw_event->data; | 
|  | char *type; | 
|  |  | 
|  | switch (ae->vda_ae.hdr.bytype) { | 
|  | case VDAAE_HDR_TYPE_RAID: | 
|  | type = "RAID group state change"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_LU: | 
|  | type = "Mapped destination LU change"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_DISK: | 
|  | type = "Physical disk inventory change"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_RESET: | 
|  | type = "Firmware reset"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_LOG_INFO: | 
|  | type = "Event Log message (INFO level)"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_LOG_WARN: | 
|  | type = "Event Log message (WARN level)"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_LOG_CRIT: | 
|  | type = "Event Log message (CRIT level)"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_LOG_FAIL: | 
|  | type = "Event Log message (FAIL level)"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_NVC: | 
|  | type = "NVCache change"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_TLG_INFO: | 
|  | type = "Time stamped log message (INFO level)"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_TLG_WARN: | 
|  | type = "Time stamped log message (WARN level)"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_TLG_CRIT: | 
|  | type = "Time stamped log message (CRIT level)"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_PWRMGT: | 
|  | type = "Power management"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_MUTE: | 
|  | type = "Mute button pressed"; | 
|  | break; | 
|  |  | 
|  | case VDAAE_HDR_TYPE_DEV: | 
|  | type = "Device attribute change"; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | type = "Unknown"; | 
|  | break; | 
|  | } | 
|  |  | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "An async event of type \"%s\" was received from the firmware.  The event contents are:", | 
|  | type); | 
|  | esas2r_log_hexdump(ESAS2R_LOG_WARN, &ae->vda_ae, | 
|  | ae->vda_ae.hdr.bylength); | 
|  |  | 
|  | } | 
|  |  | 
|  | static void | 
|  | esas2r_firmware_event_work(struct work_struct *work) | 
|  | { | 
|  | struct esas2r_fw_event_work *fw_event = | 
|  | container_of(work, struct esas2r_fw_event_work, work.work); | 
|  |  | 
|  | struct esas2r_adapter *a = fw_event->a; | 
|  |  | 
|  | u16 target_id = *(u16 *)&fw_event->data[0]; | 
|  |  | 
|  | if (a->fw_events_off) | 
|  | goto done; | 
|  |  | 
|  | switch (fw_event->type) { | 
|  | case fw_event_null: | 
|  | break; /* do nothing */ | 
|  |  | 
|  | case fw_event_lun_change: | 
|  | esas2r_remove_device(a, target_id); | 
|  | esas2r_add_device(a, target_id); | 
|  | break; | 
|  |  | 
|  | case fw_event_present: | 
|  | esas2r_add_device(a, target_id); | 
|  | break; | 
|  |  | 
|  | case fw_event_not_present: | 
|  | esas2r_remove_device(a, target_id); | 
|  | break; | 
|  |  | 
|  | case fw_event_vda_ae: | 
|  | esas2r_send_ae_event(fw_event); | 
|  | break; | 
|  | } | 
|  |  | 
|  | done: | 
|  | esas2r_free_fw_event(fw_event); | 
|  | } | 
|  |  | 
|  | void esas2r_queue_fw_event(struct esas2r_adapter *a, | 
|  | enum fw_event_type type, | 
|  | void *data, | 
|  | int data_sz) | 
|  | { | 
|  | struct esas2r_fw_event_work *fw_event; | 
|  | unsigned long flags; | 
|  |  | 
|  | fw_event = kzalloc(sizeof(struct esas2r_fw_event_work), GFP_ATOMIC); | 
|  | if (!fw_event) { | 
|  | esas2r_log(ESAS2R_LOG_WARN, | 
|  | "esas2r_queue_fw_event failed to alloc"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (type == fw_event_vda_ae) { | 
|  | struct esas2r_vda_ae *ae = | 
|  | (struct esas2r_vda_ae *)fw_event->data; | 
|  |  | 
|  | ae->signature = ESAS2R_VDA_EVENT_SIG; | 
|  | ae->bus_number = a->pcid->bus->number; | 
|  | ae->devfn = a->pcid->devfn; | 
|  | memcpy(&ae->vda_ae, data, sizeof(ae->vda_ae)); | 
|  | } else { | 
|  | memcpy(fw_event->data, data, data_sz); | 
|  | } | 
|  |  | 
|  | fw_event->type = type; | 
|  | fw_event->a = a; | 
|  |  | 
|  | spin_lock_irqsave(&a->fw_event_lock, flags); | 
|  | list_add_tail(&fw_event->list, &a->fw_event_list); | 
|  | INIT_DELAYED_WORK(&fw_event->work, esas2r_firmware_event_work); | 
|  | queue_delayed_work_on( | 
|  | smp_processor_id(), a->fw_event_q, &fw_event->work, | 
|  | msecs_to_jiffies(1)); | 
|  | spin_unlock_irqrestore(&a->fw_event_lock, flags); | 
|  | } | 
|  |  | 
|  | void esas2r_target_state_changed(struct esas2r_adapter *a, u16 targ_id, | 
|  | u8 state) | 
|  | { | 
|  | if (state == TS_LUN_CHANGE) | 
|  | esas2r_queue_fw_event(a, fw_event_lun_change, &targ_id, | 
|  | sizeof(targ_id)); | 
|  | else if (state == TS_PRESENT) | 
|  | esas2r_queue_fw_event(a, fw_event_present, &targ_id, | 
|  | sizeof(targ_id)); | 
|  | else if (state == TS_NOT_PRESENT) | 
|  | esas2r_queue_fw_event(a, fw_event_not_present, &targ_id, | 
|  | sizeof(targ_id)); | 
|  | } | 
|  |  | 
|  | /* Translate status to a Linux SCSI mid-layer error code */ | 
|  | int esas2r_req_status_to_error(u8 req_stat) | 
|  | { | 
|  | switch (req_stat) { | 
|  | case RS_OVERRUN: | 
|  | case RS_UNDERRUN: | 
|  | case RS_SUCCESS: | 
|  | /* | 
|  | * NOTE: SCSI mid-layer wants a good status for a SCSI error, because | 
|  | *       it will check the scsi_stat value in the completion anyway. | 
|  | */ | 
|  | case RS_SCSI_ERROR: | 
|  | return DID_OK; | 
|  |  | 
|  | case RS_SEL: | 
|  | case RS_SEL2: | 
|  | return DID_NO_CONNECT; | 
|  |  | 
|  | case RS_RESET: | 
|  | return DID_RESET; | 
|  |  | 
|  | case RS_ABORTED: | 
|  | return DID_ABORT; | 
|  |  | 
|  | case RS_BUSY: | 
|  | return DID_BUS_BUSY; | 
|  | } | 
|  |  | 
|  | /* everything else is just an error. */ | 
|  |  | 
|  | return DID_ERROR; | 
|  | } | 
|  |  | 
|  | module_init(esas2r_init); | 
|  | module_exit(esas2r_exit); |