|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright (C) 2011 - 2012 Cavium, Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/phy.h> | 
|  | #include <linux/of.h> | 
|  |  | 
|  | #define PHY_ID_BCM8706	0x0143bdc1 | 
|  | #define PHY_ID_BCM8727	0x0143bff0 | 
|  |  | 
|  | #define BCM87XX_PMD_RX_SIGNAL_DETECT	(MII_ADDR_C45 | 0x1000a) | 
|  | #define BCM87XX_10GBASER_PCS_STATUS	(MII_ADDR_C45 | 0x30020) | 
|  | #define BCM87XX_XGXS_LANE_STATUS	(MII_ADDR_C45 | 0x40018) | 
|  |  | 
|  | #define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002) | 
|  | #define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005) | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_OF_MDIO) | 
|  | /* Set and/or override some configuration registers based on the | 
|  | * broadcom,c45-reg-init property stored in the of_node for the phydev. | 
|  | * | 
|  | * broadcom,c45-reg-init = <devid reg mask value>,...; | 
|  | * | 
|  | * There may be one or more sets of <devid reg mask value>: | 
|  | * | 
|  | * devid: which sub-device to use. | 
|  | * reg: the register. | 
|  | * mask: if non-zero, ANDed with existing register value. | 
|  | * value: ORed with the masked value and written to the regiser. | 
|  | * | 
|  | */ | 
|  | static int bcm87xx_of_reg_init(struct phy_device *phydev) | 
|  | { | 
|  | const __be32 *paddr; | 
|  | const __be32 *paddr_end; | 
|  | int len, ret; | 
|  |  | 
|  | if (!phydev->mdio.dev.of_node) | 
|  | return 0; | 
|  |  | 
|  | paddr = of_get_property(phydev->mdio.dev.of_node, | 
|  | "broadcom,c45-reg-init", &len); | 
|  | if (!paddr) | 
|  | return 0; | 
|  |  | 
|  | paddr_end = paddr + (len /= sizeof(*paddr)); | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | while (paddr + 3 < paddr_end) { | 
|  | u16 devid	= be32_to_cpup(paddr++); | 
|  | u16 reg		= be32_to_cpup(paddr++); | 
|  | u16 mask	= be32_to_cpup(paddr++); | 
|  | u16 val_bits	= be32_to_cpup(paddr++); | 
|  | int val; | 
|  | u32 regnum = MII_ADDR_C45 | (devid << 16) | reg; | 
|  | val = 0; | 
|  | if (mask) { | 
|  | val = phy_read(phydev, regnum); | 
|  | if (val < 0) { | 
|  | ret = val; | 
|  | goto err; | 
|  | } | 
|  | val &= mask; | 
|  | } | 
|  | val |= val_bits; | 
|  |  | 
|  | ret = phy_write(phydev, regnum, val); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  | } | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  | #else | 
|  | static int bcm87xx_of_reg_init(struct phy_device *phydev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_OF_MDIO */ | 
|  |  | 
|  | static int bcm87xx_config_init(struct phy_device *phydev) | 
|  | { | 
|  | linkmode_zero(phydev->supported); | 
|  | linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT, | 
|  | phydev->supported); | 
|  | linkmode_zero(phydev->advertising); | 
|  | linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT, | 
|  | phydev->advertising); | 
|  | phydev->state = PHY_NOLINK; | 
|  | phydev->autoneg = AUTONEG_DISABLE; | 
|  |  | 
|  | bcm87xx_of_reg_init(phydev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm87xx_config_aneg(struct phy_device *phydev) | 
|  | { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int bcm87xx_read_status(struct phy_device *phydev) | 
|  | { | 
|  | int rx_signal_detect; | 
|  | int pcs_status; | 
|  | int xgxs_lane_status; | 
|  |  | 
|  | rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT); | 
|  | if (rx_signal_detect < 0) | 
|  | return rx_signal_detect; | 
|  |  | 
|  | if ((rx_signal_detect & 1) == 0) | 
|  | goto no_link; | 
|  |  | 
|  | pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS); | 
|  | if (pcs_status < 0) | 
|  | return pcs_status; | 
|  |  | 
|  | if ((pcs_status & 1) == 0) | 
|  | goto no_link; | 
|  |  | 
|  | xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS); | 
|  | if (xgxs_lane_status < 0) | 
|  | return xgxs_lane_status; | 
|  |  | 
|  | if ((xgxs_lane_status & 0x1000) == 0) | 
|  | goto no_link; | 
|  |  | 
|  | phydev->speed = 10000; | 
|  | phydev->link = 1; | 
|  | phydev->duplex = 1; | 
|  | return 0; | 
|  |  | 
|  | no_link: | 
|  | phydev->link = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm87xx_config_intr(struct phy_device *phydev) | 
|  | { | 
|  | int reg, err; | 
|  |  | 
|  | reg = phy_read(phydev, BCM87XX_LASI_CONTROL); | 
|  |  | 
|  | if (reg < 0) | 
|  | return reg; | 
|  |  | 
|  | if (phydev->interrupts == PHY_INTERRUPT_ENABLED) | 
|  | reg |= 1; | 
|  | else | 
|  | reg &= ~1; | 
|  |  | 
|  | err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int bcm87xx_did_interrupt(struct phy_device *phydev) | 
|  | { | 
|  | int reg; | 
|  |  | 
|  | reg = phy_read(phydev, BCM87XX_LASI_STATUS); | 
|  |  | 
|  | if (reg < 0) { | 
|  | phydev_err(phydev, | 
|  | "Error: Read of BCM87XX_LASI_STATUS failed: %d\n", | 
|  | reg); | 
|  | return 0; | 
|  | } | 
|  | return (reg & 1) != 0; | 
|  | } | 
|  |  | 
|  | static int bcm87xx_ack_interrupt(struct phy_device *phydev) | 
|  | { | 
|  | /* Reading the LASI status clears it. */ | 
|  | bcm87xx_did_interrupt(phydev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm8706_match_phy_device(struct phy_device *phydev) | 
|  | { | 
|  | return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706; | 
|  | } | 
|  |  | 
|  | static int bcm8727_match_phy_device(struct phy_device *phydev) | 
|  | { | 
|  | return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727; | 
|  | } | 
|  |  | 
|  | static struct phy_driver bcm87xx_driver[] = { | 
|  | { | 
|  | .phy_id		= PHY_ID_BCM8706, | 
|  | .phy_id_mask	= 0xffffffff, | 
|  | .name		= "Broadcom BCM8706", | 
|  | .features	= PHY_10GBIT_FEC_FEATURES, | 
|  | .config_init	= bcm87xx_config_init, | 
|  | .config_aneg	= bcm87xx_config_aneg, | 
|  | .read_status	= bcm87xx_read_status, | 
|  | .ack_interrupt	= bcm87xx_ack_interrupt, | 
|  | .config_intr	= bcm87xx_config_intr, | 
|  | .did_interrupt	= bcm87xx_did_interrupt, | 
|  | .match_phy_device = bcm8706_match_phy_device, | 
|  | }, { | 
|  | .phy_id		= PHY_ID_BCM8727, | 
|  | .phy_id_mask	= 0xffffffff, | 
|  | .name		= "Broadcom BCM8727", | 
|  | .features	= PHY_10GBIT_FEC_FEATURES, | 
|  | .config_init	= bcm87xx_config_init, | 
|  | .config_aneg	= bcm87xx_config_aneg, | 
|  | .read_status	= bcm87xx_read_status, | 
|  | .ack_interrupt	= bcm87xx_ack_interrupt, | 
|  | .config_intr	= bcm87xx_config_intr, | 
|  | .did_interrupt	= bcm87xx_did_interrupt, | 
|  | .match_phy_device = bcm8727_match_phy_device, | 
|  | } }; | 
|  |  | 
|  | module_phy_driver(bcm87xx_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL v2"); |