| ============================= |
| Linux 2.6.x on MPC52xx family |
| ============================= |
| |
| For the latest info, go to https://www.246tNt.com/mpc52xx/ |
| |
| To compile/use : |
| |
| - U-Boot:: |
| |
| # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION |
| if you wish to ). |
| # make lite5200_defconfig |
| # make uImage |
| |
| then, on U-boot: |
| => tftpboot 200000 uImage |
| => tftpboot 400000 pRamdisk |
| => bootm 200000 400000 |
| |
| - DBug:: |
| |
| # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION |
| if you wish to ). |
| # make lite5200_defconfig |
| # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz |
| # make zImage.initrd |
| # make |
| |
| then in DBug: |
| DBug> dn -i zImage.initrd.lite5200 |
| |
| |
| Some remarks: |
| |
| - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100 |
| is not supported, and I'm not sure anyone is interesting in working on it |
| so. I didn't took 5xxx because there's apparently a lot of 5xxx that have |
| nothing to do with the MPC5200. I also included the 'MPC' for the same |
| reason. |
| - Of course, I inspired myself from the 2.4 port. If you think I forgot to |
| mention you/your company in the copyright of some code, I'll correct it |
| ASAP. |
