| .. SPDX-License-Identifier: GPL-2.0 |
| |
| ====================== |
| Histogram Design Notes |
| ====================== |
| |
| :Author: Tom Zanussi <zanussi@kernel.org> |
| |
| This document attempts to provide a description of how the ftrace |
| histograms work and how the individual pieces map to the data |
| structures used to implement them in trace_events_hist.c and |
| tracing_map.c. |
| |
| Note: All the ftrace histogram command examples assume the working |
| directory is the ftrace /tracing directory. For example:: |
| |
| # cd /sys/kernel/debug/tracing |
| |
| Also, the histogram output displayed for those commands will be |
| generally be truncated - only enough to make the point is displayed. |
| |
| 'hist_debug' trace event files |
| ============================== |
| |
| If the kernel is compiled with CONFIG_HIST_TRIGGERS_DEBUG set, an |
| event file named 'hist_debug' will appear in each event's |
| subdirectory. This file can be read at any time and will display some |
| of the hist trigger internals described in this document. Specific |
| examples and output will be described in test cases below. |
| |
| Basic histograms |
| ================ |
| |
| First, basic histograms. Below is pretty much the simplest thing you |
| can do with histograms - create one with a single key on a single |
| event and cat the output:: |
| |
| # echo 'hist:keys=pid' >> events/sched/sched_waking/trigger |
| |
| # cat events/sched/sched_waking/hist |
| |
| { pid: 18249 } hitcount: 1 |
| { pid: 13399 } hitcount: 1 |
| { pid: 17973 } hitcount: 1 |
| { pid: 12572 } hitcount: 1 |
| ... |
| { pid: 10 } hitcount: 921 |
| { pid: 18255 } hitcount: 1444 |
| { pid: 25526 } hitcount: 2055 |
| { pid: 5257 } hitcount: 2055 |
| { pid: 27367 } hitcount: 2055 |
| { pid: 1728 } hitcount: 2161 |
| |
| Totals: |
| Hits: 21305 |
| Entries: 183 |
| Dropped: 0 |
| |
| What this does is create a histogram on the sched_waking event using |
| pid as a key and with a single value, hitcount, which even if not |
| explicitly specified, exists for every histogram regardless. |
| |
| The hitcount value is a per-bucket value that's automatically |
| incremented on every hit for the given key, which in this case is the |
| pid. |
| |
| So in this histogram, there's a separate bucket for each pid, and each |
| bucket contains a value for that bucket, counting the number of times |
| sched_waking was called for that pid. |
| |
| Each histogram is represented by a hist_data struct. |
| |
| To keep track of each key and value field in the histogram, hist_data |
| keeps an array of these fields named fields[]. The fields[] array is |
| an array containing struct hist_field representations of each |
| histogram val and key in the histogram (variables are also included |
| here, but are discussed later). So for the above histogram we have one |
| key and one value; in this case the one value is the hitcount value, |
| which all histograms have, regardless of whether they define that |
| value or not, which the above histogram does not. |
| |
| Each struct hist_field contains a pointer to the ftrace_event_field |
| from the event's trace_event_file along with various bits related to |
| that such as the size, offset, type, and a hist_field_fn_t function, |
| which is used to grab the field's data from the ftrace event buffer |
| (in most cases - some hist_fields such as hitcount don't directly map |
| to an event field in the trace buffer - in these cases the function |
| implementation gets its value from somewhere else). The flags field |
| indicates which type of field it is - key, value, variable, variable |
| reference, etc., with value being the default. |
| |
| The other important hist_data data structure in addition to the |
| fields[] array is the tracing_map instance created for the histogram, |
| which is held in the .map member. The tracing_map implements the |
| lock-free hash table used to implement histograms (see |
| kernel/trace/tracing_map.h for much more discussion about the |
| low-level data structures implementing the tracing_map). For the |
| purposes of this discussion, the tracing_map contains a number of |
| buckets, each bucket corresponding to a particular tracing_map_elt |
| object hashed by a given histogram key. |
| |
| Below is a diagram the first part of which describes the hist_data and |
| associated key and value fields for the histogram described above. As |
| you can see, there are two fields in the fields array, one val field |
| for the hitcount and one key field for the pid key. |
| |
| Below that is a diagram of a run-time snapshot of what the tracing_map |
| might look like for a given run. It attempts to show the |
| relationships between the hist_data fields and the tracing_map |
| elements for a couple hypothetical keys and values.:: |
| |
| +------------------+ |
| | hist_data | |
| +------------------+ +----------------+ |
| | .fields[] |---->| val = hitcount |----------------------------+ |
| +----------------+ +----------------+ | |
| | .map | | .size | | |
| +----------------+ +--------------+ | |
| | .offset | | |
| +--------------+ | |
| | .fn() | | |
| +--------------+ | |
| . | |
| . | |
| . | |
| +----------------+ <--- n_vals | |
| | key = pid |----------------------------|--+ |
| +----------------+ | | |
| | .size | | | |
| +--------------+ | | |
| | .offset | | | |
| +--------------+ | | |
| | .fn() | | | |
| +----------------+ <--- n_fields | | |
| | unused | | | |
| +----------------+ | | |
| | | | | |
| +--------------+ | | |
| | | | | |
| +--------------+ | | |
| | | | | |
| +--------------+ | | |
| n_keys = n_fields - n_vals | | |
| |
| The hist_data n_vals and n_fields delineate the extent of the fields[] | | |
| array and separate keys from values for the rest of the code. | | |
| |
| Below is a run-time representation of the tracing_map part of the | | |
| histogram, with pointers from various parts of the fields[] array | | |
| to corresponding parts of the tracing_map. | | |
| |
| The tracing_map consists of an array of tracing_map_entrys and a set | | |
| of preallocated tracing_map_elts (abbreviated below as map_entry and | | |
| map_elt). The total number of map_entrys in the hist_data.map array = | | |
| map->max_elts (actually map->map_size but only max_elts of those are | | |
| used. This is a property required by the map_insert() algorithm). | | |
| |
| If a map_entry is unused, meaning no key has yet hashed into it, its | | |
| .key value is 0 and its .val pointer is NULL. Once a map_entry has | | |
| been claimed, the .key value contains the key's hash value and the | | |
| .val member points to a map_elt containing the full key and an entry | | |
| for each key or value in the map_elt.fields[] array. There is an | | |
| entry in the map_elt.fields[] array corresponding to each hist_field | | |
| in the histogram, and this is where the continually aggregated sums | | |
| corresponding to each histogram value are kept. | | |
| |
| The diagram attempts to show the relationship between the | | |
| hist_data.fields[] and the map_elt.fields[] with the links drawn | | |
| between diagrams:: |
| |
| +-----------+ | | |
| | hist_data | | | |
| +-----------+ | | |
| | .fields | | | |
| +---------+ +-----------+ | | |
| | .map |---->| map_entry | | | |
| +---------+ +-----------+ | | |
| | .key |---> 0 | | |
| +---------+ | | |
| | .val |---> NULL | | |
| +-----------+ | | |
| | map_entry | | | |
| +-----------+ | | |
| | .key |---> pid = 999 | | |
| +---------+ +-----------+ | | |
| | .val |--->| map_elt | | | |
| +---------+ +-----------+ | | |
| . | .key |---> full key * | | |
| . +---------+ +---------------+ | | |
| . | .fields |--->| .sum (val) |<-+ | |
| +-----------+ +---------+ | 2345 | | | |
| | map_entry | +---------------+ | | |
| +-----------+ | .offset (key) |<----+ |
| | .key |---> 0 | 0 | | | |
| +---------+ +---------------+ | | |
| | .val |---> NULL . | | |
| +-----------+ . | | |
| | map_entry | . | | |
| +-----------+ +---------------+ | | |
| | .key | | .sum (val) or | | | |
| +---------+ +---------+ | .offset (key) | | | |
| | .val |--->| map_elt | +---------------+ | | |
| +-----------+ +---------+ | .sum (val) or | | | |
| | map_entry | | .offset (key) | | | |
| +-----------+ +---------------+ | | |
| | .key |---> pid = 4444 | | |
| +---------+ +-----------+ | | |
| | .val | | map_elt | | | |
| +---------+ +-----------+ | | |
| | .key |---> full key * | | |
| +---------+ +---------------+ | | |
| | .fields |--->| .sum (val) |<-+ | |
| +---------+ | 65523 | | |
| +---------------+ | |
| | .offset (key) |<----+ |
| | 0 | |
| +---------------+ |
| . |
| . |
| . |
| +---------------+ |
| | .sum (val) or | |
| | .offset (key) | |
| +---------------+ |
| | .sum (val) or | |
| | .offset (key) | |
| +---------------+ |
| |
| Abbreviations used in the diagrams:: |
| |
| hist_data = struct hist_trigger_data |
| hist_data.fields = struct hist_field |
| fn = hist_field_fn_t |
| map_entry = struct tracing_map_entry |
| map_elt = struct tracing_map_elt |
| map_elt.fields = struct tracing_map_field |
| |
| Whenever a new event occurs and it has a hist trigger associated with |
| it, event_hist_trigger() is called. event_hist_trigger() first deals |
| with the key: for each subkey in the key (in the above example, there |
| is just one subkey corresponding to pid), the hist_field that |
| represents that subkey is retrieved from hist_data.fields[] and the |
| hist_field_fn_t fn() associated with that field, along with the |
| field's size and offset, is used to grab that subkey's data from the |
| current trace record. |
| |
| Once the complete key has been retrieved, it's used to look that key |
| up in the tracing_map. If there's no tracing_map_elt associated with |
| that key, an empty one is claimed and inserted in the map for the new |
| key. In either case, the tracing_map_elt associated with that key is |
| returned. |
| |
| Once a tracing_map_elt available, hist_trigger_elt_update() is called. |
| As the name implies, this updates the element, which basically means |
| updating the element's fields. There's a tracing_map_field associated |
| with each key and value in the histogram, and each of these correspond |
| to the key and value hist_fields created when the histogram was |
| created. hist_trigger_elt_update() goes through each value hist_field |
| and, as for the keys, uses the hist_field's fn() and size and offset |
| to grab the field's value from the current trace record. Once it has |
| that value, it simply adds that value to that field's |
| continually-updated tracing_map_field.sum member. Some hist_field |
| fn()s, such as for the hitcount, don't actually grab anything from the |
| trace record (the hitcount fn() just increments the counter sum by 1), |
| but the idea is the same. |
| |
| Once all the values have been updated, hist_trigger_elt_update() is |
| done and returns. Note that there are also tracing_map_fields for |
| each subkey in the key, but hist_trigger_elt_update() doesn't look at |
| them or update anything - those exist only for sorting, which can |
| happen later. |
| |
| Basic histogram test |
| -------------------- |
| |
| This is a good example to try. It produces 3 value fields and 2 key |
| fields in the output:: |
| |
| # echo 'hist:keys=common_pid,call_site.sym:values=bytes_req,bytes_alloc,hitcount' >> events/kmem/kmalloc/trigger |
| |
| To see the debug data, cat the kmem/kmalloc's 'hist_debug' file. It |
| will show the trigger info of the histogram it corresponds to, along |
| with the address of the hist_data associated with the histogram, which |
| will become useful in later examples. It then displays the number of |
| total hist_fields associated with the histogram along with a count of |
| how many of those correspond to keys and how many correspond to values. |
| |
| It then goes on to display details for each field, including the |
| field's flags and the position of each field in the hist_data's |
| fields[] array, which is useful information for verifying that things |
| internally appear correct or not, and which again will become even |
| more useful in further examples:: |
| |
| # cat events/kmem/kmalloc/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=common_pid,call_site.sym:vals=hitcount,bytes_req,bytes_alloc:sort=hitcount:size=2048 [active] |
| # |
| |
| hist_data: 000000005e48c9a5 |
| |
| n_vals: 3 |
| n_keys: 2 |
| n_fields: 5 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| VAL: normal u64 value |
| ftrace_event_field name: bytes_req |
| type: size_t |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[2]: |
| flags: |
| VAL: normal u64 value |
| ftrace_event_field name: bytes_alloc |
| type: size_t |
| size: 8 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[3]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: common_pid |
| type: int |
| size: 8 |
| is_signed: 1 |
| |
| hist_data->fields[4]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: call_site |
| type: unsigned long |
| size: 8 |
| is_signed: 0 |
| |
| The commands below can be used to clean things up for the next test:: |
| |
| # echo '!hist:keys=common_pid,call_site.sym:values=bytes_req,bytes_alloc,hitcount' >> events/kmem/kmalloc/trigger |
| |
| Variables |
| ========= |
| |
| Variables allow data from one hist trigger to be saved by one hist |
| trigger and retrieved by another hist trigger. For example, a trigger |
| on the sched_waking event can capture a timestamp for a particular |
| pid, and later a sched_switch event that switches to that pid event |
| can grab the timestamp and use it to calculate a time delta between |
| the two events:: |
| |
| # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> |
| events/sched/sched_waking/trigger |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0' >> |
| events/sched/sched_switch/trigger |
| |
| In terms of the histogram data structures, variables are implemented |
| as another type of hist_field and for a given hist trigger are added |
| to the hist_data.fields[] array just after all the val fields. To |
| distinguish them from the existing key and val fields, they're given a |
| new flag type, HIST_FIELD_FL_VAR (abbreviated FL_VAR) and they also |
| make use of a new .var.idx field member in struct hist_field, which |
| maps them to an index in a new map_elt.vars[] array added to the |
| map_elt specifically designed to store and retrieve variable values. |
| The diagram below shows those new elements and adds a new variable |
| entry, ts0, corresponding to the ts0 variable in the sched_waking |
| trigger above. |
| |
| sched_waking histogram |
| ----------------------:: |
| |
| +------------------+ |
| | hist_data |<-------------------------------------------------------+ |
| +------------------+ +-------------------+ | |
| | .fields[] |-->| val = hitcount | | |
| +----------------+ +-------------------+ | |
| | .map | | .size | | |
| +----------------+ +-----------------+ | |
| | .offset | | |
| +-----------------+ | |
| | .fn() | | |
| +-----------------+ | |
| | .flags | | |
| +-----------------+ | |
| | .var.idx | | |
| +-------------------+ | |
| | var = ts0 | | |
| +-------------------+ | |
| | .size | | |
| +-----------------+ | |
| | .offset | | |
| +-----------------+ | |
| | .fn() | | |
| +-----------------+ | |
| | .flags & FL_VAR | | |
| +-----------------+ | |
| | .var.idx |----------------------------+-+ | |
| +-----------------+ | | | |
| . | | | |
| . | | | |
| . | | | |
| +-------------------+ <--- n_vals | | | |
| | key = pid | | | | |
| +-------------------+ | | | |
| | .size | | | | |
| +-----------------+ | | | |
| | .offset | | | | |
| +-----------------+ | | | |
| | .fn() | | | | |
| +-----------------+ | | | |
| | .flags & FL_KEY | | | | |
| +-----------------+ | | | |
| | .var.idx | | | | |
| +-------------------+ <--- n_fields | | | |
| | unused | | | | |
| +-------------------+ | | | |
| | | | | | |
| +-----------------+ | | | |
| | | | | | |
| +-----------------+ | | | |
| | | | | | |
| +-----------------+ | | | |
| | | | | | |
| +-----------------+ | | | |
| | | | | | |
| +-----------------+ | | | |
| n_keys = n_fields - n_vals | | | |
| | | | |
| |
| This is very similar to the basic case. In the above diagram, we can | | | |
| see a new .flags member has been added to the struct hist_field | | | |
| struct, and a new entry added to hist_data.fields representing the ts0 | | | |
| variable. For a normal val hist_field, .flags is just 0 (modulo | | | |
| modifier flags), but if the value is defined as a variable, the .flags | | | |
| contains a set FL_VAR bit. | | | |
| |
| As you can see, the ts0 entry's .var.idx member contains the index | | | |
| into the tracing_map_elts' .vars[] array containing variable values. | | | |
| This idx is used whenever the value of the variable is set or read. | | | |
| The map_elt.vars idx assigned to the given variable is assigned and | | | |
| saved in .var.idx by create_tracing_map_fields() after it calls | | | |
| tracing_map_add_var(). | | | |
| |
| Below is a representation of the histogram at run-time, which | | | |
| populates the map, along with correspondence to the above hist_data and | | | |
| hist_field data structures. | | | |
| |
| The diagram attempts to show the relationship between the | | | |
| hist_data.fields[] and the map_elt.fields[] and map_elt.vars[] with | | | |
| the links drawn between diagrams. For each of the map_elts, you can | | | |
| see that the .fields[] members point to the .sum or .offset of a key | | | |
| or val and the .vars[] members point to the value of a variable. The | | | |
| arrows between the two diagrams show the linkages between those | | | |
| tracing_map members and the field definitions in the corresponding | | | |
| hist_data fields[] members.:: |
| |
| +-----------+ | | | |
| | hist_data | | | | |
| +-----------+ | | | |
| | .fields | | | | |
| +---------+ +-----------+ | | | |
| | .map |---->| map_entry | | | | |
| +---------+ +-----------+ | | | |
| | .key |---> 0 | | | |
| +---------+ | | | |
| | .val |---> NULL | | | |
| +-----------+ | | | |
| | map_entry | | | | |
| +-----------+ | | | |
| | .key |---> pid = 999 | | | |
| +---------+ +-----------+ | | | |
| | .val |--->| map_elt | | | | |
| +---------+ +-----------+ | | | |
| . | .key |---> full key * | | | |
| . +---------+ +---------------+ | | | |
| . | .fields |--->| .sum (val) | | | | |
| . +---------+ | 2345 | | | | |
| . +--| .vars | +---------------+ | | | |
| . | +---------+ | .offset (key) | | | | |
| . | | 0 | | | | |
| . | +---------------+ | | | |
| . | . | | | |
| . | . | | | |
| . | . | | | |
| . | +---------------+ | | | |
| . | | .sum (val) or | | | | |
| . | | .offset (key) | | | | |
| . | +---------------+ | | | |
| . | | .sum (val) or | | | | |
| . | | .offset (key) | | | | |
| . | +---------------+ | | | |
| . | | | | |
| . +---------------->+---------------+ | | | |
| . | ts0 |<--+ | | |
| . | 113345679876 | | | | |
| . +---------------+ | | | |
| . | unused | | | | |
| . | | | | | |
| . +---------------+ | | | |
| . . | | | |
| . . | | | |
| . . | | | |
| . +---------------+ | | | |
| . | unused | | | | |
| . | | | | | |
| . +---------------+ | | | |
| . | unused | | | | |
| . | | | | | |
| . +---------------+ | | | |
| . | | | |
| +-----------+ | | | |
| | map_entry | | | | |
| +-----------+ | | | |
| | .key |---> pid = 4444 | | | |
| +---------+ +-----------+ | | | |
| | .val |--->| map_elt | | | | |
| +---------+ +-----------+ | | | |
| . | .key |---> full key * | | | |
| . +---------+ +---------------+ | | | |
| . | .fields |--->| .sum (val) | | | | |
| +---------+ | 2345 | | | | |
| +--| .vars | +---------------+ | | | |
| | +---------+ | .offset (key) | | | | |
| | | 0 | | | | |
| | +---------------+ | | | |
| | . | | | |
| | . | | | |
| | . | | | |
| | +---------------+ | | | |
| | | .sum (val) or | | | | |
| | | .offset (key) | | | | |
| | +---------------+ | | | |
| | | .sum (val) or | | | | |
| | | .offset (key) | | | | |
| | +---------------+ | | | |
| | | | | |
| | +---------------+ | | | |
| +---------------->| ts0 |<--+ | | |
| | 213499240729 | | | |
| +---------------+ | | |
| | unused | | | |
| | | | | |
| +---------------+ | | |
| . | | |
| . | | |
| . | | |
| +---------------+ | | |
| | unused | | | |
| | | | | |
| +---------------+ | | |
| | unused | | | |
| | | | | |
| +---------------+ | | |
| |
| For each used map entry, there's a map_elt pointing to an array of | | |
| .vars containing the current value of the variables associated with | | |
| that histogram entry. So in the above, the timestamp associated with | | |
| pid 999 is 113345679876, and the timestamp variable in the same | | |
| .var.idx for pid 4444 is 213499240729. | | |
| |
| sched_switch histogram | | |
| ---------------------- | | |
| |
| The sched_switch histogram paired with the above sched_waking | | |
| histogram is shown below. The most important aspect of the | | |
| sched_switch histogram is that it references a variable on the | | |
| sched_waking histogram above. | | |
| |
| The histogram diagram is very similar to the others so far displayed, | | |
| but it adds variable references. You can see the normal hitcount and | | |
| key fields along with a new wakeup_lat variable implemented in the | | |
| same way as the sched_waking ts0 variable, but in addition there's an | | |
| entry with the new FL_VAR_REF (short for HIST_FIELD_FL_VAR_REF) flag. | | |
| |
| Associated with the new var ref field are a couple of new hist_field | | |
| members, var.hist_data and var_ref_idx. For a variable reference, the | | |
| var.hist_data goes with the var.idx, which together uniquely identify | | |
| a particular variable on a particular histogram. The var_ref_idx is | | |
| just the index into the var_ref_vals[] array that caches the values of | | |
| each variable whenever a hist trigger is updated. Those resulting | | |
| values are then finally accessed by other code such as trace action | | |
| code that uses the var_ref_idx values to assign param values. | | |
| |
| The diagram below describes the situation for the sched_switch | | |
| histogram referred to before:: |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0' >> | | |
| events/sched/sched_switch/trigger | | |
| | | |
| +------------------+ | | |
| | hist_data | | | |
| +------------------+ +-----------------------+ | | |
| | .fields[] |-->| val = hitcount | | | |
| +----------------+ +-----------------------+ | | |
| | .map | | .size | | | |
| +----------------+ +---------------------+ | | |
| +--| .var_refs[] | | .offset | | | |
| | +----------------+ +---------------------+ | | |
| | | .fn() | | | |
| | var_ref_vals[] +---------------------+ | | |
| | +-------------+ | .flags | | | |
| | | $ts0 |<---+ +---------------------+ | | |
| | +-------------+ | | .var.idx | | | |
| | | | | +---------------------+ | | |
| | +-------------+ | | .var.hist_data | | | |
| | | | | +---------------------+ | | |
| | +-------------+ | | .var_ref_idx | | | |
| | | | | +-----------------------+ | | |
| | +-------------+ | | var = wakeup_lat | | | |
| | . | +-----------------------+ | | |
| | . | | .size | | | |
| | . | +---------------------+ | | |
| | +-------------+ | | .offset | | | |
| | | | | +---------------------+ | | |
| | +-------------+ | | .fn() | | | |
| | | | | +---------------------+ | | |
| | +-------------+ | | .flags & FL_VAR | | | |
| | | +---------------------+ | | |
| | | | .var.idx | | | |
| | | +---------------------+ | | |
| | | | .var.hist_data | | | |
| | | +---------------------+ | | |
| | | | .var_ref_idx | | | |
| | | +---------------------+ | | |
| | | . | | |
| | | . | | |
| | | . | | |
| | | +-----------------------+ <--- n_vals | | |
| | | | key = pid | | | |
| | | +-----------------------+ | | |
| | | | .size | | | |
| | | +---------------------+ | | |
| | | | .offset | | | |
| | | +---------------------+ | | |
| | | | .fn() | | | |
| | | +---------------------+ | | |
| | | | .flags | | | |
| | | +---------------------+ | | |
| | | | .var.idx | | | |
| | | +-----------------------+ <--- n_fields | | |
| | | | unused | | | |
| | | +-----------------------+ | | |
| | | | | | | |
| | | +---------------------+ | | |
| | | | | | | |
| | | +---------------------+ | | |
| | | | | | | |
| | | +---------------------+ | | |
| | | | | | | |
| | | +---------------------+ | | |
| | | | | | | |
| | | +---------------------+ | | |
| | | n_keys = n_fields - n_vals | | |
| | | | | |
| | | | | |
| | | +-----------------------+ | | |
| +---------------------->| var_ref = $ts0 | | | |
| | +-----------------------+ | | |
| | | .size | | | |
| | +---------------------+ | | |
| | | .offset | | | |
| | +---------------------+ | | |
| | | .fn() | | | |
| | +---------------------+ | | |
| | | .flags & FL_VAR_REF | | | |
| | +---------------------+ | | |
| | | .var.idx |--------------------------+ | |
| | +---------------------+ | |
| | | .var.hist_data |----------------------------+ |
| | +---------------------+ |
| +---| .var_ref_idx | |
| +---------------------+ |
| |
| Abbreviations used in the diagrams:: |
| |
| hist_data = struct hist_trigger_data |
| hist_data.fields = struct hist_field |
| fn = hist_field_fn_t |
| FL_KEY = HIST_FIELD_FL_KEY |
| FL_VAR = HIST_FIELD_FL_VAR |
| FL_VAR_REF = HIST_FIELD_FL_VAR_REF |
| |
| When a hist trigger makes use of a variable, a new hist_field is |
| created with flag HIST_FIELD_FL_VAR_REF. For a VAR_REF field, the |
| var.idx and var.hist_data take the same values as the referenced |
| variable, as well as the referenced variable's size, type, and |
| is_signed values. The VAR_REF field's .name is set to the name of the |
| variable it references. If a variable reference was created using the |
| explicit system.event.$var_ref notation, the hist_field's system and |
| event_name variables are also set. |
| |
| So, in order to handle an event for the sched_switch histogram, |
| because we have a reference to a variable on another histogram, we |
| need to resolve all variable references first. This is done via the |
| resolve_var_refs() calls made from event_hist_trigger(). What this |
| does is grabs the var_refs[] array from the hist_data representing the |
| sched_switch histogram. For each one of those, the referenced |
| variable's var.hist_data along with the current key is used to look up |
| the corresponding tracing_map_elt in that histogram. Once found, the |
| referenced variable's var.idx is used to look up the variable's value |
| using tracing_map_read_var(elt, var.idx), which yields the value of |
| the variable for that element, ts0 in the case above. Note that both |
| the hist_fields representing both the variable and the variable |
| reference have the same var.idx, so this is straightforward. |
| |
| Variable and variable reference test |
| ------------------------------------ |
| |
| This example creates a variable on the sched_waking event, ts0, and |
| uses it in the sched_switch trigger. The sched_switch trigger also |
| creates its own variable, wakeup_lat, but nothing yet uses it:: |
| |
| # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0' >> events/sched/sched_switch/trigger |
| |
| Looking at the sched_waking 'hist_debug' output, in addition to the |
| normal key and value hist_fields, in the val fields section we see a |
| field with the HIST_FIELD_FL_VAR flag, which indicates that that field |
| represents a variable. Note that in addition to the variable name, |
| contained in the var.name field, it includes the var.idx, which is the |
| index into the tracing_map_elt.vars[] array of the actual variable |
| location. Note also that the output shows that variables live in the |
| same part of the hist_data->fields[] array as normal values:: |
| |
| # cat events/sched/sched_waking/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] |
| # |
| |
| hist_data: 000000009536f554 |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| Moving on to the sched_switch trigger hist_debug output, in addition |
| to the unused wakeup_lat variable, we see a new section displaying |
| variable references. Variable references are displayed in a separate |
| section because in addition to being logically separate from |
| variables and values, they actually live in a separate hist_data |
| array, var_refs[]. |
| |
| In this example, the sched_switch trigger has a reference to a |
| variable on the sched_waking trigger, $ts0. Looking at the details, |
| we can see that the var.hist_data value of the referenced variable |
| matches the previously displayed sched_waking trigger, and the var.idx |
| value matches the previously displayed var.idx value for that |
| variable. Also displayed is the var_ref_idx value for that variable |
| reference, which is where the value for that variable is cached for |
| use when the trigger is invoked:: |
| |
| # cat events/sched/sched_switch/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global [active] |
| # |
| |
| hist_data: 00000000f4ee8006 |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: next_pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| variable reference fields: |
| |
| hist_data->var_refs[0]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 000000009536f554 |
| var_ref_idx (into hist_data->var_refs[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| The commands below can be used to clean things up for the next test:: |
| |
| # echo '!hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0' >> events/sched/sched_switch/trigger |
| |
| # echo '!hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| Actions and Handlers |
| ==================== |
| |
| Adding onto the previous example, we will now do something with that |
| wakeup_lat variable, namely send it and another field as a synthetic |
| event. |
| |
| The onmatch() action below basically says that whenever we have a |
| sched_switch event, if we have a matching sched_waking event, in this |
| case if we have a pid in the sched_waking histogram that matches the |
| next_pid field on this sched_switch event, we retrieve the |
| variables specified in the wakeup_latency() trace action, and use |
| them to generate a new wakeup_latency event into the trace stream. |
| |
| Note that the way the trace handlers such as wakeup_latency() (which |
| could equivalently be written trace(wakeup_latency,$wakeup_lat,next_pid) |
| are implemented, the parameters specified to the trace handler must be |
| variables. In this case, $wakeup_lat is obviously a variable, but |
| next_pid isn't, since it's just naming a field in the sched_switch |
| trace event. Since this is something that almost every trace() and |
| save() action does, a special shortcut is implemented to allow field |
| names to be used directly in those cases. How it works is that under |
| the covers, a temporary variable is created for the named field, and |
| this variable is what is actually passed to the trace handler. In the |
| code and documentation, this type of variable is called a 'field |
| variable'. |
| |
| Fields on other trace event's histograms can be used as well. In that |
| case we have to generate a new histogram and an unfortunately named |
| 'synthetic_field' (the use of synthetic here has nothing to do with |
| synthetic events) and use that special histogram field as a variable. |
| |
| The diagram below illustrates the new elements described above in the |
| context of the sched_switch histogram using the onmatch() handler and |
| the trace() action. |
| |
| First, we define the wakeup_latency synthetic event:: |
| |
| # echo 'wakeup_latency u64 lat; pid_t pid' >> synthetic_events |
| |
| Next, the sched_waking hist trigger as before:: |
| |
| # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> |
| events/sched/sched_waking/trigger |
| |
| Finally, we create a hist trigger on the sched_switch event that |
| generates a wakeup_latency() trace event. In this case we pass |
| next_pid into the wakeup_latency synthetic event invocation, which |
| means it will be automatically converted into a field variable:: |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: \ |
| onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid)' >> |
| /sys/kernel/debug/tracing/events/sched/sched_switch/trigger |
| |
| The diagram for the sched_switch event is similar to previous examples |
| but shows the additional field_vars[] array for hist_data and shows |
| the linkages between the field_vars and the variables and references |
| created to implement the field variables. The details are discussed |
| below:: |
| |
| +------------------+ |
| | hist_data | |
| +------------------+ +-----------------------+ |
| | .fields[] |-->| val = hitcount | |
| +----------------+ +-----------------------+ |
| | .map | | .size | |
| +----------------+ +---------------------+ |
| +---| .field_vars[] | | .offset | |
| | +----------------+ +---------------------+ |
| |+--| .var_refs[] | | .offset | |
| || +----------------+ +---------------------+ |
| || | .fn() | |
| || var_ref_vals[] +---------------------+ |
| || +-------------+ | .flags | |
| || | $ts0 |<---+ +---------------------+ |
| || +-------------+ | | .var.idx | |
| || | $next_pid |<-+ | +---------------------+ |
| || +-------------+ | | | .var.hist_data | |
| ||+>| $wakeup_lat | | | +---------------------+ |
| ||| +-------------+ | | | .var_ref_idx | |
| ||| | | | | +-----------------------+ |
| ||| +-------------+ | | | var = wakeup_lat | |
| ||| . | | +-----------------------+ |
| ||| . | | | .size | |
| ||| . | | +---------------------+ |
| ||| +-------------+ | | | .offset | |
| ||| | | | | +---------------------+ |
| ||| +-------------+ | | | .fn() | |
| ||| | | | | +---------------------+ |
| ||| +-------------+ | | | .flags & FL_VAR | |
| ||| | | +---------------------+ |
| ||| | | | .var.idx | |
| ||| | | +---------------------+ |
| ||| | | | .var.hist_data | |
| ||| | | +---------------------+ |
| ||| | | | .var_ref_idx | |
| ||| | | +---------------------+ |
| ||| | | . |
| ||| | | . |
| ||| | | . |
| ||| | | . |
| ||| +--------------+ | | . |
| +-->| field_var | | | . |
| || +--------------+ | | . |
| || | var | | | . |
| || +------------+ | | . |
| || | val | | | . |
| || +--------------+ | | . |
| || | field_var | | | . |
| || +--------------+ | | . |
| || | var | | | . |
| || +------------+ | | . |
| || | val | | | . |
| || +------------+ | | . |
| || . | | . |
| || . | | . |
| || . | | +-----------------------+ <--- n_vals |
| || +--------------+ | | | key = pid | |
| || | field_var | | | +-----------------------+ |
| || +--------------+ | | | .size | |
| || | var |--+| +---------------------+ |
| || +------------+ ||| | .offset | |
| || | val |-+|| +---------------------+ |
| || +------------+ ||| | .fn() | |
| || ||| +---------------------+ |
| || ||| | .flags | |
| || ||| +---------------------+ |
| || ||| | .var.idx | |
| || ||| +---------------------+ <--- n_fields |
| || ||| |
| || ||| n_keys = n_fields - n_vals |
| || ||| +-----------------------+ |
| || |+->| var = next_pid | |
| || | | +-----------------------+ |
| || | | | .size | |
| || | | +---------------------+ |
| || | | | .offset | |
| || | | +---------------------+ |
| || | | | .flags & FL_VAR | |
| || | | +---------------------+ |
| || | | | .var.idx | |
| || | | +---------------------+ |
| || | | | .var.hist_data | |
| || | | +-----------------------+ |
| || +-->| val for next_pid | |
| || | | +-----------------------+ |
| || | | | .size | |
| || | | +---------------------+ |
| || | | | .offset | |
| || | | +---------------------+ |
| || | | | .fn() | |
| || | | +---------------------+ |
| || | | | .flags | |
| || | | +---------------------+ |
| || | | | | |
| || | | +---------------------+ |
| || | | |
| || | | |
| || | | +-----------------------+ |
| +|------------------|-|>| var_ref = $ts0 | |
| | | | +-----------------------+ |
| | | | | .size | |
| | | | +---------------------+ |
| | | | | .offset | |
| | | | +---------------------+ |
| | | | | .fn() | |
| | | | +---------------------+ |
| | | | | .flags & FL_VAR_REF | |
| | | | +---------------------+ |
| | | +---| .var_ref_idx | |
| | | +-----------------------+ |
| | | | var_ref = $next_pid | |
| | | +-----------------------+ |
| | | | .size | |
| | | +---------------------+ |
| | | | .offset | |
| | | +---------------------+ |
| | | | .fn() | |
| | | +---------------------+ |
| | | | .flags & FL_VAR_REF | |
| | | +---------------------+ |
| | +-----| .var_ref_idx | |
| | +-----------------------+ |
| | | var_ref = $wakeup_lat | |
| | +-----------------------+ |
| | | .size | |
| | +---------------------+ |
| | | .offset | |
| | +---------------------+ |
| | | .fn() | |
| | +---------------------+ |
| | | .flags & FL_VAR_REF | |
| | +---------------------+ |
| +------------------------| .var_ref_idx | |
| +---------------------+ |
| |
| As you can see, for a field variable, two hist_fields are created: one |
| representing the variable, in this case next_pid, and one to actually |
| get the value of the field from the trace stream, like a normal val |
| field does. These are created separately from normal variable |
| creation and are saved in the hist_data->field_vars[] array. See |
| below for how these are used. In addition, a reference hist_field is |
| also created, which is needed to reference the field variables such as |
| $next_pid variable in the trace() action. |
| |
| Note that $wakeup_lat is also a variable reference, referencing the |
| value of the expression common_timestamp-$ts0, and so also needs to |
| have a hist field entry representing that reference created. |
| |
| When hist_trigger_elt_update() is called to get the normal key and |
| value fields, it also calls update_field_vars(), which goes through |
| each field_var created for the histogram, and available from |
| hist_data->field_vars and calls val->fn() to get the data from the |
| current trace record, and then uses the var's var.idx to set the |
| variable at the var.idx offset in the appropriate tracing_map_elt's |
| variable at elt->vars[var.idx]. |
| |
| Once all the variables have been updated, resolve_var_refs() can be |
| called from event_hist_trigger(), and not only can our $ts0 and |
| $next_pid references be resolved but the $wakeup_lat reference as |
| well. At this point, the trace() action can simply access the values |
| assembled in the var_ref_vals[] array and generate the trace event. |
| |
| The same process occurs for the field variables associated with the |
| save() action. |
| |
| Abbreviations used in the diagram:: |
| |
| hist_data = struct hist_trigger_data |
| hist_data.fields = struct hist_field |
| field_var = struct field_var |
| fn = hist_field_fn_t |
| FL_KEY = HIST_FIELD_FL_KEY |
| FL_VAR = HIST_FIELD_FL_VAR |
| FL_VAR_REF = HIST_FIELD_FL_VAR_REF |
| |
| trace() action field variable test |
| ---------------------------------- |
| |
| This example adds to the previous test example by finally making use |
| of the wakeup_lat variable, but in addition also creates a couple of |
| field variables that then are all passed to the wakeup_latency() trace |
| action via the onmatch() handler. |
| |
| First, we create the wakeup_latency synthetic event:: |
| |
| # echo 'wakeup_latency u64 lat; pid_t pid; char comm[16]' >> synthetic_events |
| |
| Next, the sched_waking trigger from previous examples:: |
| |
| # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| Finally, as in the previous test example, we calculate and assign the |
| wakeup latency using the $ts0 reference from the sched_waking trigger |
| to the wakeup_lat variable, and finally use it along with a couple |
| sched_switch event fields, next_pid and next_comm, to generate a |
| wakeup_latency trace event. The next_pid and next_comm event fields |
| are automatically converted into field variables for this purpose:: |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,next_comm)' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger |
| |
| The sched_waking hist_debug output shows the same data as in the |
| previous test example:: |
| |
| # cat events/sched/sched_waking/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] |
| # |
| |
| hist_data: 00000000d60ff61f |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| The sched_switch hist_debug output shows the same key and value fields |
| as in the previous test example - note that wakeup_lat is still in the |
| val fields section, but that the new field variables are not there - |
| although the field variables are variables, they're held separately in |
| the hist_data's field_vars[] array. Although the field variables and |
| the normal variables are located in separate places, you can see that |
| the actual variable locations for those variables in the |
| tracing_map_elt.vars[] do have increasing indices as expected: |
| wakeup_lat takes the var.idx = 0 slot, while the field variables for |
| next_pid and next_comm have values var.idx = 1, and var.idx = 2. Note |
| also that those are the same values displayed for the variable |
| references corresponding to those variables in the variable reference |
| fields section. Since there are two triggers and thus two hist_data |
| addresses, those addresses also need to be accounted for when doing |
| the matching - you can see that the first variable refers to the 0 |
| var.idx on the previous hist trigger (see the hist_data address |
| associated with that trigger), while the second variable refers to the |
| 0 var.idx on the sched_switch hist trigger, as do all the remaining |
| variable references. |
| |
| Finally, the action tracking variables section just shows the system |
| and event name for the onmatch() handler:: |
| |
| # cat events/sched/sched_switch/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,next_comm) [active] |
| # |
| |
| hist_data: 0000000008f551b7 |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: next_pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| variable reference fields: |
| |
| hist_data->var_refs[0]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 00000000d60ff61f |
| var_ref_idx (into hist_data->var_refs[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->var_refs[1]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 0000000008f551b7 |
| var_ref_idx (into hist_data->var_refs[]): 1 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| hist_data->var_refs[2]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: next_pid |
| var.idx (into tracing_map_elt.vars[]): 1 |
| var.hist_data: 0000000008f551b7 |
| var_ref_idx (into hist_data->var_refs[]): 2 |
| type: pid_t |
| size: 4 |
| is_signed: 0 |
| |
| hist_data->var_refs[3]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: next_comm |
| var.idx (into tracing_map_elt.vars[]): 2 |
| var.hist_data: 0000000008f551b7 |
| var_ref_idx (into hist_data->var_refs[]): 3 |
| type: char[16] |
| size: 256 |
| is_signed: 0 |
| |
| field variables: |
| |
| hist_data->field_vars[0]: |
| |
| field_vars[0].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: next_pid |
| var.idx (into tracing_map_elt.vars[]): 1 |
| |
| field_vars[0].val: |
| ftrace_event_field name: next_pid |
| type: pid_t |
| size: 4 |
| is_signed: 1 |
| |
| hist_data->field_vars[1]: |
| |
| field_vars[1].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: next_comm |
| var.idx (into tracing_map_elt.vars[]): 2 |
| |
| field_vars[1].val: |
| ftrace_event_field name: next_comm |
| type: char[16] |
| size: 256 |
| is_signed: 0 |
| |
| action tracking variables (for onmax()/onchange()/onmatch()): |
| |
| hist_data->actions[0].match_data.event_system: sched |
| hist_data->actions[0].match_data.event: sched_waking |
| |
| The commands below can be used to clean things up for the next test:: |
| |
| # echo '!hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,next_comm)' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger |
| |
| # echo '!hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| # echo '!wakeup_latency u64 lat; pid_t pid; char comm[16]' >> synthetic_events |
| |
| action_data and the trace() action |
| ---------------------------------- |
| |
| As mentioned above, when the trace() action generates a synthetic |
| event, all the parameters to the synthetic event either already are |
| variables or are converted into variables (via field variables), and |
| finally all those variable values are collected via references to them |
| into a var_ref_vals[] array. |
| |
| The values in the var_ref_vals[] array, however, don't necessarily |
| follow the same ordering as the synthetic event params. To address |
| that, struct action_data contains another array, var_ref_idx[] that |
| maps the trace action params to the var_ref_vals[] values. Below is a |
| diagram illustrating that for the wakeup_latency() synthetic event:: |
| |
| +------------------+ wakeup_latency() |
| | action_data | event params var_ref_vals[] |
| +------------------+ +-----------------+ +-----------------+ |
| | .var_ref_idx[] |--->| $wakeup_lat idx |---+ | | |
| +----------------+ +-----------------+ | +-----------------+ |
| | .synth_event | | $next_pid idx |---|-+ | $wakeup_lat val | |
| +----------------+ +-----------------+ | | +-----------------+ |
| . | +->| $next_pid val | |
| . | +-----------------+ |
| . | . |
| +-----------------+ | . |
| | | | . |
| +-----------------+ | +-----------------+ |
| +--->| $wakeup_lat val | |
| +-----------------+ |
| |
| Basically, how this ends up getting used in the synthetic event probe |
| function, trace_event_raw_event_synth(), is as follows:: |
| |
| for each field i in .synth_event |
| val_idx = .var_ref_idx[i] |
| val = var_ref_vals[val_idx] |
| |
| action_data and the onXXX() handlers |
| ------------------------------------ |
| |
| The hist trigger onXXX() actions other than onmatch(), such as onmax() |
| and onchange(), also make use of and internally create hidden |
| variables. This information is contained in the |
| action_data.track_data struct, and is also visible in the hist_debug |
| output as will be described in the example below. |
| |
| Typically, the onmax() or onchange() handlers are used in conjunction |
| with the save() and snapshot() actions. For example:: |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: \ |
| onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm)' >> |
| /sys/kernel/debug/tracing/events/sched/sched_switch/trigger |
| |
| or:: |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0: \ |
| onmax($wakeup_lat).snapshot()' >> |
| /sys/kernel/debug/tracing/events/sched/sched_switch/trigger |
| |
| save() action field variable test |
| --------------------------------- |
| |
| For this example, instead of generating a synthetic event, the save() |
| action is used to save field values whenever an onmax() handler |
| detects that a new max latency has been hit. As in the previous |
| example, the values being saved are also field values, but in this |
| case, are kept in a separate hist_data array named save_vars[]. |
| |
| As in previous test examples, we set up the sched_waking trigger:: |
| |
| # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| In this case, however, we set up the sched_switch trigger to save some |
| sched_switch field values whenever we hit a new maximum latency. For |
| both the onmax() handler and save() action, variables will be created, |
| which we can use the hist_debug files to examine:: |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm)' >> events/sched/sched_switch/trigger |
| |
| The sched_waking hist_debug output shows the same data as in the |
| previous test examples:: |
| |
| # cat events/sched/sched_waking/hist_debug |
| |
| # |
| # trigger info: hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] |
| # |
| |
| hist_data: 00000000e6290f48 |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| The output of the sched_switch trigger shows the same val and key |
| values as before, but also shows a couple new sections. |
| |
| First, the action tracking variables section now shows the |
| actions[].track_data information describing the special tracking |
| variables and references used to track, in this case, the running |
| maximum value. The actions[].track_data.var_ref member contains the |
| reference to the variable being tracked, in this case the $wakeup_lat |
| variable. In order to perform the onmax() handler function, there |
| also needs to be a variable that tracks the current maximum by getting |
| updated whenever a new maximum is hit. In this case, we can see that |
| an auto-generated variable named ' __max' has been created and is |
| visible in the actions[].track_data.track_var variable. |
| |
| Finally, in the new 'save action variables' section, we can see that |
| the 4 params to the save() function have resulted in 4 field variables |
| being created for the purposes of saving the values of the named |
| fields when the max is hit. These variables are kept in a separate |
| save_vars[] array off of hist_data, so are displayed in a separate |
| section:: |
| |
| # cat events/sched/sched_switch/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) [active] |
| # |
| |
| hist_data: 0000000057bcd28d |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: next_pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| variable reference fields: |
| |
| hist_data->var_refs[0]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 00000000e6290f48 |
| var_ref_idx (into hist_data->var_refs[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->var_refs[1]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 0000000057bcd28d |
| var_ref_idx (into hist_data->var_refs[]): 1 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| action tracking variables (for onmax()/onchange()/onmatch()): |
| |
| hist_data->actions[0].track_data.var_ref: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 0000000057bcd28d |
| var_ref_idx (into hist_data->var_refs[]): 1 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| hist_data->actions[0].track_data.track_var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: __max |
| var.idx (into tracing_map_elt.vars[]): 1 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| save action variables (save() params): |
| |
| hist_data->save_vars[0]: |
| |
| save_vars[0].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: next_comm |
| var.idx (into tracing_map_elt.vars[]): 2 |
| |
| save_vars[0].val: |
| ftrace_event_field name: next_comm |
| type: char[16] |
| size: 256 |
| is_signed: 0 |
| |
| hist_data->save_vars[1]: |
| |
| save_vars[1].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: prev_pid |
| var.idx (into tracing_map_elt.vars[]): 3 |
| |
| save_vars[1].val: |
| ftrace_event_field name: prev_pid |
| type: pid_t |
| size: 4 |
| is_signed: 1 |
| |
| hist_data->save_vars[2]: |
| |
| save_vars[2].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: prev_prio |
| var.idx (into tracing_map_elt.vars[]): 4 |
| |
| save_vars[2].val: |
| ftrace_event_field name: prev_prio |
| type: int |
| size: 4 |
| is_signed: 1 |
| |
| hist_data->save_vars[3]: |
| |
| save_vars[3].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: prev_comm |
| var.idx (into tracing_map_elt.vars[]): 5 |
| |
| save_vars[3].val: |
| ftrace_event_field name: prev_comm |
| type: char[16] |
| size: 256 |
| is_signed: 0 |
| |
| The commands below can be used to clean things up for the next test:: |
| |
| # echo '!hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm)' >> events/sched/sched_switch/trigger |
| |
| # echo '!hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| A couple special cases |
| ====================== |
| |
| While the above covers the basics of the histogram internals, there |
| are a couple of special cases that should be discussed, since they |
| tend to create even more confusion. Those are field variables on other |
| histograms, and aliases, both described below through example tests |
| using the hist_debug files. |
| |
| Test of field variables on other histograms |
| ------------------------------------------- |
| |
| This example is similar to the previous examples, but in this case, |
| the sched_switch trigger references a hist trigger field on another |
| event, namely the sched_waking event. In order to accomplish this, a |
| field variable is created for the other event, but since an existing |
| histogram can't be used, as existing histograms are immutable, a new |
| histogram with a matching variable is created and used, and we'll see |
| that reflected in the hist_debug output shown below. |
| |
| First, we create the wakeup_latency synthetic event. Note the |
| addition of the prio field:: |
| |
| # echo 'wakeup_latency u64 lat; pid_t pid; int prio' >> synthetic_events |
| |
| As in previous test examples, we set up the sched_waking trigger:: |
| |
| # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| Here we set up a hist trigger on sched_switch to send a wakeup_latency |
| event using an onmatch handler naming the sched_waking event. Note |
| that the third param being passed to the wakeup_latency() is prio, |
| which is a field name that needs to have a field variable created for |
| it. There isn't however any prio field on the sched_switch event so |
| it would seem that it wouldn't be possible to create a field variable |
| for it. The matching sched_waking event does have a prio field, so it |
| should be possible to make use of it for this purpose. The problem |
| with that is that it's not currently possible to define a new variable |
| on an existing histogram, so it's not possible to add a new prio field |
| variable to the existing sched_waking histogram. It is however |
| possible to create an additional new 'matching' sched_waking histogram |
| for the same event, meaning that it uses the same key and filters, and |
| define the new prio field variable on that. |
| |
| Here's the sched_switch trigger:: |
| |
| # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,prio)' >> events/sched/sched_switch/trigger |
| |
| And here's the output of the hist_debug information for the |
| sched_waking hist trigger. Note that there are two histograms |
| displayed in the output: the first is the normal sched_waking |
| histogram we've seen in the previous examples, and the second is the |
| special histogram we created to provide the prio field variable. |
| |
| Looking at the second histogram below, we see a variable with the name |
| synthetic_prio. This is the field variable created for the prio field |
| on that sched_waking histogram:: |
| |
| # cat events/sched/sched_waking/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] |
| # |
| |
| hist_data: 00000000349570e4 |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] |
| # |
| |
| hist_data: 000000006920cf38 |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| ftrace_event_field name: prio |
| var.name: synthetic_prio |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: int |
| size: 4 |
| is_signed: 1 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| Looking at the sched_switch histogram below, we can see a reference to |
| the synthetic_prio variable on sched_waking, and looking at the |
| associated hist_data address we see that it is indeed associated with |
| the new histogram. Note also that the other references are to a |
| normal variable, wakeup_lat, and to a normal field variable, next_pid, |
| the details of which are in the field variables section:: |
| |
| # cat events/sched/sched_switch/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=next_pid:vals=hitcount:wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,prio) [active] |
| # |
| |
| hist_data: 00000000a73b67df |
| |
| n_vals: 2 |
| n_keys: 1 |
| n_fields: 3 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: next_pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| variable reference fields: |
| |
| hist_data->var_refs[0]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 00000000349570e4 |
| var_ref_idx (into hist_data->var_refs[]): 0 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->var_refs[1]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 00000000a73b67df |
| var_ref_idx (into hist_data->var_refs[]): 1 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| hist_data->var_refs[2]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: next_pid |
| var.idx (into tracing_map_elt.vars[]): 1 |
| var.hist_data: 00000000a73b67df |
| var_ref_idx (into hist_data->var_refs[]): 2 |
| type: pid_t |
| size: 4 |
| is_signed: 0 |
| |
| hist_data->var_refs[3]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: synthetic_prio |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 000000006920cf38 |
| var_ref_idx (into hist_data->var_refs[]): 3 |
| type: int |
| size: 4 |
| is_signed: 1 |
| |
| field variables: |
| |
| hist_data->field_vars[0]: |
| |
| field_vars[0].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: next_pid |
| var.idx (into tracing_map_elt.vars[]): 1 |
| |
| field_vars[0].val: |
| ftrace_event_field name: next_pid |
| type: pid_t |
| size: 4 |
| is_signed: 1 |
| |
| action tracking variables (for onmax()/onchange()/onmatch()): |
| |
| hist_data->actions[0].match_data.event_system: sched |
| hist_data->actions[0].match_data.event: sched_waking |
| |
| The commands below can be used to clean things up for the next test:: |
| |
| # echo '!hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,prio)' >> events/sched/sched_switch/trigger |
| |
| # echo '!hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| # echo '!wakeup_latency u64 lat; pid_t pid; int prio' >> synthetic_events |
| |
| Alias test |
| ---------- |
| |
| This example is very similar to previous examples, but demonstrates |
| the alias flag. |
| |
| First, we create the wakeup_latency synthetic event:: |
| |
| # echo 'wakeup_latency u64 lat; pid_t pid; char comm[16]' >> synthetic_events |
| |
| Next, we create a sched_waking trigger similar to previous examples, |
| but in this case we save the pid in the waking_pid variable:: |
| |
| # echo 'hist:keys=pid:waking_pid=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| For the sched_switch trigger, instead of using $waking_pid directly in |
| the wakeup_latency synthetic event invocation, we create an alias of |
| $waking_pid named $woken_pid, and use that in the synthetic event |
| invocation instead:: |
| |
| # echo 'hist:keys=next_pid:woken_pid=$waking_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,$woken_pid,next_comm)' >> events/sched/sched_switch/trigger |
| |
| Looking at the sched_waking hist_debug output, in addition to the |
| normal fields, we can see the waking_pid variable:: |
| |
| # cat events/sched/sched_waking/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=pid:vals=hitcount:waking_pid=pid,ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] |
| # |
| |
| hist_data: 00000000a250528c |
| |
| n_vals: 3 |
| n_keys: 1 |
| n_fields: 4 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| ftrace_event_field name: pid |
| var.name: waking_pid |
| var.idx (into tracing_map_elt.vars[]): 0 |
| type: pid_t |
| size: 4 |
| is_signed: 1 |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 1 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[3]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| The sched_switch hist_debug output shows that a variable named |
| woken_pid has been created but that it also has the |
| HIST_FIELD_FL_ALIAS flag set. It also has the HIST_FIELD_FL_VAR flag |
| set, which is why it appears in the val field section. |
| |
| Despite that implementation detail, an alias variable is actually more |
| like a variable reference; in fact it can be thought of as a reference |
| to a reference. The implementation copies the var_ref->fn() from the |
| variable reference being referenced, in this case, the waking_pid |
| fn(), which is hist_field_var_ref() and makes that the fn() of the |
| alias. The hist_field_var_ref() fn() requires the var_ref_idx of the |
| variable reference it's using, so waking_pid's var_ref_idx is also |
| copied to the alias. The end result is that when the value of alias |
| is retrieved, in the end it just does the same thing the original |
| reference would have done and retrieves the same value from the |
| var_ref_vals[] array. You can verify this in the output by noting |
| that the var_ref_idx of the alias, in this case woken_pid, is the same |
| as the var_ref_idx of the reference, waking_pid, in the variable |
| reference fields section. |
| |
| Additionally, once it gets that value, since it is also a variable, it |
| then saves that value into its var.idx. So the var.idx of the |
| woken_pid alias is 0, which it fills with the value from var_ref_idx 0 |
| when its fn() is called to update itself. You'll also notice that |
| there's a woken_pid var_ref in the variable refs section. That is the |
| reference to the woken_pid alias variable, and you can see that it |
| retrieves the value from the same var.idx as the woken_pid alias, 0, |
| and then in turn saves that value in its own var_ref_idx slot, 3, and |
| the value at this position is finally what gets assigned to the |
| $woken_pid slot in the trace event invocation:: |
| |
| # cat events/sched/sched_switch/hist_debug |
| |
| # event histogram |
| # |
| # trigger info: hist:keys=next_pid:vals=hitcount:woken_pid=$waking_pid,wakeup_lat=common_timestamp.usecs-$ts0:sort=hitcount:size=2048:clock=global:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,$woken_pid,next_comm) [active] |
| # |
| |
| hist_data: 0000000055d65ed0 |
| |
| n_vals: 3 |
| n_keys: 1 |
| n_fields: 4 |
| |
| val fields: |
| |
| hist_data->fields[0]: |
| flags: |
| VAL: HIST_FIELD_FL_HITCOUNT |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->fields[1]: |
| flags: |
| HIST_FIELD_FL_VAR |
| HIST_FIELD_FL_ALIAS |
| var.name: woken_pid |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var_ref_idx (into hist_data->var_refs[]): 0 |
| type: pid_t |
| size: 4 |
| is_signed: 1 |
| |
| hist_data->fields[2]: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 1 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| key fields: |
| |
| hist_data->fields[3]: |
| flags: |
| HIST_FIELD_FL_KEY |
| ftrace_event_field name: next_pid |
| type: pid_t |
| size: 8 |
| is_signed: 1 |
| |
| variable reference fields: |
| |
| hist_data->var_refs[0]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: waking_pid |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 00000000a250528c |
| var_ref_idx (into hist_data->var_refs[]): 0 |
| type: pid_t |
| size: 4 |
| is_signed: 1 |
| |
| hist_data->var_refs[1]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: ts0 |
| var.idx (into tracing_map_elt.vars[]): 1 |
| var.hist_data: 00000000a250528c |
| var_ref_idx (into hist_data->var_refs[]): 1 |
| type: u64 |
| size: 8 |
| is_signed: 0 |
| |
| hist_data->var_refs[2]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: wakeup_lat |
| var.idx (into tracing_map_elt.vars[]): 1 |
| var.hist_data: 0000000055d65ed0 |
| var_ref_idx (into hist_data->var_refs[]): 2 |
| type: u64 |
| size: 0 |
| is_signed: 0 |
| |
| hist_data->var_refs[3]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: woken_pid |
| var.idx (into tracing_map_elt.vars[]): 0 |
| var.hist_data: 0000000055d65ed0 |
| var_ref_idx (into hist_data->var_refs[]): 3 |
| type: pid_t |
| size: 4 |
| is_signed: 1 |
| |
| hist_data->var_refs[4]: |
| flags: |
| HIST_FIELD_FL_VAR_REF |
| name: next_comm |
| var.idx (into tracing_map_elt.vars[]): 2 |
| var.hist_data: 0000000055d65ed0 |
| var_ref_idx (into hist_data->var_refs[]): 4 |
| type: char[16] |
| size: 256 |
| is_signed: 0 |
| |
| field variables: |
| |
| hist_data->field_vars[0]: |
| |
| field_vars[0].var: |
| flags: |
| HIST_FIELD_FL_VAR |
| var.name: next_comm |
| var.idx (into tracing_map_elt.vars[]): 2 |
| |
| field_vars[0].val: |
| ftrace_event_field name: next_comm |
| type: char[16] |
| size: 256 |
| is_signed: 0 |
| |
| action tracking variables (for onmax()/onchange()/onmatch()): |
| |
| hist_data->actions[0].match_data.event_system: sched |
| hist_data->actions[0].match_data.event: sched_waking |
| |
| The commands below can be used to clean things up for the next test:: |
| |
| # echo '!hist:keys=next_pid:woken_pid=$waking_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,$woken_pid,next_comm)' >> events/sched/sched_switch/trigger |
| |
| # echo '!hist:keys=pid:ts0=common_timestamp.usecs' >> events/sched/sched_waking/trigger |
| |
| # echo '!wakeup_latency u64 lat; pid_t pid; char comm[16]' >> synthetic_events |
