| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * cxd2841er.c | 
 |  * | 
 |  * Sony digital demodulator driver for | 
 |  *	CXD2841ER - DVB-S/S2/T/T2/C/C2 | 
 |  *	CXD2854ER - DVB-S/S2/T/T2/C/C2, ISDB-T/S | 
 |  * | 
 |  * Copyright 2012 Sony Corporation | 
 |  * Copyright (C) 2014 NetUP Inc. | 
 |  * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru> | 
 |  * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru> | 
 |   */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/string.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/math64.h> | 
 | #include <linux/log2.h> | 
 | #include <linux/dynamic_debug.h> | 
 | #include <linux/kernel.h> | 
 |  | 
 | #include <media/dvb_math.h> | 
 | #include <media/dvb_frontend.h> | 
 | #include "cxd2841er.h" | 
 | #include "cxd2841er_priv.h" | 
 |  | 
 | #define MAX_WRITE_REGSIZE	16 | 
 | #define LOG2_E_100X 144 | 
 |  | 
 | #define INTLOG10X100(x) ((u32) (((u64) intlog10(x) * 100) >> 24)) | 
 |  | 
 | /* DVB-C constellation */ | 
 | enum sony_dvbc_constellation_t { | 
 | 	SONY_DVBC_CONSTELLATION_16QAM, | 
 | 	SONY_DVBC_CONSTELLATION_32QAM, | 
 | 	SONY_DVBC_CONSTELLATION_64QAM, | 
 | 	SONY_DVBC_CONSTELLATION_128QAM, | 
 | 	SONY_DVBC_CONSTELLATION_256QAM | 
 | }; | 
 |  | 
 | enum cxd2841er_state { | 
 | 	STATE_SHUTDOWN = 0, | 
 | 	STATE_SLEEP_S, | 
 | 	STATE_ACTIVE_S, | 
 | 	STATE_SLEEP_TC, | 
 | 	STATE_ACTIVE_TC | 
 | }; | 
 |  | 
 | struct cxd2841er_priv { | 
 | 	struct dvb_frontend		frontend; | 
 | 	struct i2c_adapter		*i2c; | 
 | 	u8				i2c_addr_slvx; | 
 | 	u8				i2c_addr_slvt; | 
 | 	const struct cxd2841er_config	*config; | 
 | 	enum cxd2841er_state		state; | 
 | 	u8				system; | 
 | 	enum cxd2841er_xtal		xtal; | 
 | 	enum fe_caps caps; | 
 | 	u32				flags; | 
 | 	unsigned long			stats_time; | 
 | }; | 
 |  | 
 | static const struct cxd2841er_cnr_data s_cn_data[] = { | 
 | 	{ 0x033e, 0 }, { 0x0339, 100 }, { 0x0333, 200 }, | 
 | 	{ 0x032e, 300 }, { 0x0329, 400 }, { 0x0324, 500 }, | 
 | 	{ 0x031e, 600 }, { 0x0319, 700 }, { 0x0314, 800 }, | 
 | 	{ 0x030f, 900 }, { 0x030a, 1000 }, { 0x02ff, 1100 }, | 
 | 	{ 0x02f4, 1200 }, { 0x02e9, 1300 }, { 0x02de, 1400 }, | 
 | 	{ 0x02d4, 1500 }, { 0x02c9, 1600 }, { 0x02bf, 1700 }, | 
 | 	{ 0x02b5, 1800 }, { 0x02ab, 1900 }, { 0x02a1, 2000 }, | 
 | 	{ 0x029b, 2100 }, { 0x0295, 2200 }, { 0x0290, 2300 }, | 
 | 	{ 0x028a, 2400 }, { 0x0284, 2500 }, { 0x027f, 2600 }, | 
 | 	{ 0x0279, 2700 }, { 0x0274, 2800 }, { 0x026e, 2900 }, | 
 | 	{ 0x0269, 3000 }, { 0x0262, 3100 }, { 0x025c, 3200 }, | 
 | 	{ 0x0255, 3300 }, { 0x024f, 3400 }, { 0x0249, 3500 }, | 
 | 	{ 0x0242, 3600 }, { 0x023c, 3700 }, { 0x0236, 3800 }, | 
 | 	{ 0x0230, 3900 }, { 0x022a, 4000 }, { 0x0223, 4100 }, | 
 | 	{ 0x021c, 4200 }, { 0x0215, 4300 }, { 0x020e, 4400 }, | 
 | 	{ 0x0207, 4500 }, { 0x0201, 4600 }, { 0x01fa, 4700 }, | 
 | 	{ 0x01f4, 4800 }, { 0x01ed, 4900 }, { 0x01e7, 5000 }, | 
 | 	{ 0x01e0, 5100 }, { 0x01d9, 5200 }, { 0x01d2, 5300 }, | 
 | 	{ 0x01cb, 5400 }, { 0x01c4, 5500 }, { 0x01be, 5600 }, | 
 | 	{ 0x01b7, 5700 }, { 0x01b1, 5800 }, { 0x01aa, 5900 }, | 
 | 	{ 0x01a4, 6000 }, { 0x019d, 6100 }, { 0x0196, 6200 }, | 
 | 	{ 0x018f, 6300 }, { 0x0189, 6400 }, { 0x0182, 6500 }, | 
 | 	{ 0x017c, 6600 }, { 0x0175, 6700 }, { 0x016f, 6800 }, | 
 | 	{ 0x0169, 6900 }, { 0x0163, 7000 }, { 0x015c, 7100 }, | 
 | 	{ 0x0156, 7200 }, { 0x0150, 7300 }, { 0x014a, 7400 }, | 
 | 	{ 0x0144, 7500 }, { 0x013e, 7600 }, { 0x0138, 7700 }, | 
 | 	{ 0x0132, 7800 }, { 0x012d, 7900 }, { 0x0127, 8000 }, | 
 | 	{ 0x0121, 8100 }, { 0x011c, 8200 }, { 0x0116, 8300 }, | 
 | 	{ 0x0111, 8400 }, { 0x010b, 8500 }, { 0x0106, 8600 }, | 
 | 	{ 0x0101, 8700 }, { 0x00fc, 8800 }, { 0x00f7, 8900 }, | 
 | 	{ 0x00f2, 9000 }, { 0x00ee, 9100 }, { 0x00ea, 9200 }, | 
 | 	{ 0x00e6, 9300 }, { 0x00e2, 9400 }, { 0x00de, 9500 }, | 
 | 	{ 0x00da, 9600 }, { 0x00d7, 9700 }, { 0x00d3, 9800 }, | 
 | 	{ 0x00d0, 9900 }, { 0x00cc, 10000 }, { 0x00c7, 10100 }, | 
 | 	{ 0x00c3, 10200 }, { 0x00bf, 10300 }, { 0x00ba, 10400 }, | 
 | 	{ 0x00b6, 10500 }, { 0x00b2, 10600 }, { 0x00ae, 10700 }, | 
 | 	{ 0x00aa, 10800 }, { 0x00a7, 10900 }, { 0x00a3, 11000 }, | 
 | 	{ 0x009f, 11100 }, { 0x009c, 11200 }, { 0x0098, 11300 }, | 
 | 	{ 0x0094, 11400 }, { 0x0091, 11500 }, { 0x008e, 11600 }, | 
 | 	{ 0x008a, 11700 }, { 0x0087, 11800 }, { 0x0084, 11900 }, | 
 | 	{ 0x0081, 12000 }, { 0x007e, 12100 }, { 0x007b, 12200 }, | 
 | 	{ 0x0079, 12300 }, { 0x0076, 12400 }, { 0x0073, 12500 }, | 
 | 	{ 0x0071, 12600 }, { 0x006e, 12700 }, { 0x006c, 12800 }, | 
 | 	{ 0x0069, 12900 }, { 0x0067, 13000 }, { 0x0065, 13100 }, | 
 | 	{ 0x0062, 13200 }, { 0x0060, 13300 }, { 0x005e, 13400 }, | 
 | 	{ 0x005c, 13500 }, { 0x005a, 13600 }, { 0x0058, 13700 }, | 
 | 	{ 0x0056, 13800 }, { 0x0054, 13900 }, { 0x0052, 14000 }, | 
 | 	{ 0x0050, 14100 }, { 0x004e, 14200 }, { 0x004c, 14300 }, | 
 | 	{ 0x004b, 14400 }, { 0x0049, 14500 }, { 0x0047, 14600 }, | 
 | 	{ 0x0046, 14700 }, { 0x0044, 14800 }, { 0x0043, 14900 }, | 
 | 	{ 0x0041, 15000 }, { 0x003f, 15100 }, { 0x003e, 15200 }, | 
 | 	{ 0x003c, 15300 }, { 0x003b, 15400 }, { 0x003a, 15500 }, | 
 | 	{ 0x0037, 15700 }, { 0x0036, 15800 }, { 0x0034, 15900 }, | 
 | 	{ 0x0033, 16000 }, { 0x0032, 16100 }, { 0x0031, 16200 }, | 
 | 	{ 0x0030, 16300 }, { 0x002f, 16400 }, { 0x002e, 16500 }, | 
 | 	{ 0x002d, 16600 }, { 0x002c, 16700 }, { 0x002b, 16800 }, | 
 | 	{ 0x002a, 16900 }, { 0x0029, 17000 }, { 0x0028, 17100 }, | 
 | 	{ 0x0027, 17200 }, { 0x0026, 17300 }, { 0x0025, 17400 }, | 
 | 	{ 0x0024, 17500 }, { 0x0023, 17600 }, { 0x0022, 17800 }, | 
 | 	{ 0x0021, 17900 }, { 0x0020, 18000 }, { 0x001f, 18200 }, | 
 | 	{ 0x001e, 18300 }, { 0x001d, 18500 }, { 0x001c, 18700 }, | 
 | 	{ 0x001b, 18900 }, { 0x001a, 19000 }, { 0x0019, 19200 }, | 
 | 	{ 0x0018, 19300 }, { 0x0017, 19500 }, { 0x0016, 19700 }, | 
 | 	{ 0x0015, 19900 }, { 0x0014, 20000 }, | 
 | }; | 
 |  | 
 | static const struct cxd2841er_cnr_data s2_cn_data[] = { | 
 | 	{ 0x05af, 0 }, { 0x0597, 100 }, { 0x057e, 200 }, | 
 | 	{ 0x0567, 300 }, { 0x0550, 400 }, { 0x0539, 500 }, | 
 | 	{ 0x0522, 600 }, { 0x050c, 700 }, { 0x04f6, 800 }, | 
 | 	{ 0x04e1, 900 }, { 0x04cc, 1000 }, { 0x04b6, 1100 }, | 
 | 	{ 0x04a1, 1200 }, { 0x048c, 1300 }, { 0x0477, 1400 }, | 
 | 	{ 0x0463, 1500 }, { 0x044f, 1600 }, { 0x043c, 1700 }, | 
 | 	{ 0x0428, 1800 }, { 0x0416, 1900 }, { 0x0403, 2000 }, | 
 | 	{ 0x03ef, 2100 }, { 0x03dc, 2200 }, { 0x03c9, 2300 }, | 
 | 	{ 0x03b6, 2400 }, { 0x03a4, 2500 }, { 0x0392, 2600 }, | 
 | 	{ 0x0381, 2700 }, { 0x036f, 2800 }, { 0x035f, 2900 }, | 
 | 	{ 0x034e, 3000 }, { 0x033d, 3100 }, { 0x032d, 3200 }, | 
 | 	{ 0x031d, 3300 }, { 0x030d, 3400 }, { 0x02fd, 3500 }, | 
 | 	{ 0x02ee, 3600 }, { 0x02df, 3700 }, { 0x02d0, 3800 }, | 
 | 	{ 0x02c2, 3900 }, { 0x02b4, 4000 }, { 0x02a6, 4100 }, | 
 | 	{ 0x0299, 4200 }, { 0x028c, 4300 }, { 0x027f, 4400 }, | 
 | 	{ 0x0272, 4500 }, { 0x0265, 4600 }, { 0x0259, 4700 }, | 
 | 	{ 0x024d, 4800 }, { 0x0241, 4900 }, { 0x0236, 5000 }, | 
 | 	{ 0x022b, 5100 }, { 0x0220, 5200 }, { 0x0215, 5300 }, | 
 | 	{ 0x020a, 5400 }, { 0x0200, 5500 }, { 0x01f6, 5600 }, | 
 | 	{ 0x01ec, 5700 }, { 0x01e2, 5800 }, { 0x01d8, 5900 }, | 
 | 	{ 0x01cf, 6000 }, { 0x01c6, 6100 }, { 0x01bc, 6200 }, | 
 | 	{ 0x01b3, 6300 }, { 0x01aa, 6400 }, { 0x01a2, 6500 }, | 
 | 	{ 0x0199, 6600 }, { 0x0191, 6700 }, { 0x0189, 6800 }, | 
 | 	{ 0x0181, 6900 }, { 0x0179, 7000 }, { 0x0171, 7100 }, | 
 | 	{ 0x0169, 7200 }, { 0x0161, 7300 }, { 0x015a, 7400 }, | 
 | 	{ 0x0153, 7500 }, { 0x014b, 7600 }, { 0x0144, 7700 }, | 
 | 	{ 0x013d, 7800 }, { 0x0137, 7900 }, { 0x0130, 8000 }, | 
 | 	{ 0x012a, 8100 }, { 0x0124, 8200 }, { 0x011e, 8300 }, | 
 | 	{ 0x0118, 8400 }, { 0x0112, 8500 }, { 0x010c, 8600 }, | 
 | 	{ 0x0107, 8700 }, { 0x0101, 8800 }, { 0x00fc, 8900 }, | 
 | 	{ 0x00f7, 9000 }, { 0x00f2, 9100 }, { 0x00ec, 9200 }, | 
 | 	{ 0x00e7, 9300 }, { 0x00e2, 9400 }, { 0x00dd, 9500 }, | 
 | 	{ 0x00d8, 9600 }, { 0x00d4, 9700 }, { 0x00cf, 9800 }, | 
 | 	{ 0x00ca, 9900 }, { 0x00c6, 10000 }, { 0x00c2, 10100 }, | 
 | 	{ 0x00be, 10200 }, { 0x00b9, 10300 }, { 0x00b5, 10400 }, | 
 | 	{ 0x00b1, 10500 }, { 0x00ae, 10600 }, { 0x00aa, 10700 }, | 
 | 	{ 0x00a6, 10800 }, { 0x00a3, 10900 }, { 0x009f, 11000 }, | 
 | 	{ 0x009b, 11100 }, { 0x0098, 11200 }, { 0x0095, 11300 }, | 
 | 	{ 0x0091, 11400 }, { 0x008e, 11500 }, { 0x008b, 11600 }, | 
 | 	{ 0x0088, 11700 }, { 0x0085, 11800 }, { 0x0082, 11900 }, | 
 | 	{ 0x007f, 12000 }, { 0x007c, 12100 }, { 0x007a, 12200 }, | 
 | 	{ 0x0077, 12300 }, { 0x0074, 12400 }, { 0x0072, 12500 }, | 
 | 	{ 0x006f, 12600 }, { 0x006d, 12700 }, { 0x006b, 12800 }, | 
 | 	{ 0x0068, 12900 }, { 0x0066, 13000 }, { 0x0064, 13100 }, | 
 | 	{ 0x0061, 13200 }, { 0x005f, 13300 }, { 0x005d, 13400 }, | 
 | 	{ 0x005b, 13500 }, { 0x0059, 13600 }, { 0x0057, 13700 }, | 
 | 	{ 0x0055, 13800 }, { 0x0053, 13900 }, { 0x0051, 14000 }, | 
 | 	{ 0x004f, 14100 }, { 0x004e, 14200 }, { 0x004c, 14300 }, | 
 | 	{ 0x004a, 14400 }, { 0x0049, 14500 }, { 0x0047, 14600 }, | 
 | 	{ 0x0045, 14700 }, { 0x0044, 14800 }, { 0x0042, 14900 }, | 
 | 	{ 0x0041, 15000 }, { 0x003f, 15100 }, { 0x003e, 15200 }, | 
 | 	{ 0x003c, 15300 }, { 0x003b, 15400 }, { 0x003a, 15500 }, | 
 | 	{ 0x0038, 15600 }, { 0x0037, 15700 }, { 0x0036, 15800 }, | 
 | 	{ 0x0034, 15900 }, { 0x0033, 16000 }, { 0x0032, 16100 }, | 
 | 	{ 0x0031, 16200 }, { 0x0030, 16300 }, { 0x002f, 16400 }, | 
 | 	{ 0x002e, 16500 }, { 0x002d, 16600 }, { 0x002c, 16700 }, | 
 | 	{ 0x002b, 16800 }, { 0x002a, 16900 }, { 0x0029, 17000 }, | 
 | 	{ 0x0028, 17100 }, { 0x0027, 17200 }, { 0x0026, 17300 }, | 
 | 	{ 0x0025, 17400 }, { 0x0024, 17500 }, { 0x0023, 17600 }, | 
 | 	{ 0x0022, 17800 }, { 0x0021, 17900 }, { 0x0020, 18000 }, | 
 | 	{ 0x001f, 18200 }, { 0x001e, 18300 }, { 0x001d, 18500 }, | 
 | 	{ 0x001c, 18700 }, { 0x001b, 18900 }, { 0x001a, 19000 }, | 
 | 	{ 0x0019, 19200 }, { 0x0018, 19300 }, { 0x0017, 19500 }, | 
 | 	{ 0x0016, 19700 }, { 0x0015, 19900 }, { 0x0014, 20000 }, | 
 | }; | 
 |  | 
 | static int cxd2841er_freeze_regs(struct cxd2841er_priv *priv); | 
 | static int cxd2841er_unfreeze_regs(struct cxd2841er_priv *priv); | 
 |  | 
 | static void cxd2841er_i2c_debug(struct cxd2841er_priv *priv, | 
 | 				u8 addr, u8 reg, u8 write, | 
 | 				const u8 *data, u32 len) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 		"cxd2841er: I2C %s addr %02x reg 0x%02x size %d data %*ph\n", | 
 | 		(write == 0 ? "read" : "write"), addr, reg, len, len, data); | 
 | } | 
 |  | 
 | static int cxd2841er_write_regs(struct cxd2841er_priv *priv, | 
 | 				u8 addr, u8 reg, const u8 *data, u32 len) | 
 | { | 
 | 	int ret; | 
 | 	u8 buf[MAX_WRITE_REGSIZE + 1]; | 
 | 	u8 i2c_addr = (addr == I2C_SLVX ? | 
 | 		priv->i2c_addr_slvx : priv->i2c_addr_slvt); | 
 | 	struct i2c_msg msg[1] = { | 
 | 		{ | 
 | 			.addr = i2c_addr, | 
 | 			.flags = 0, | 
 | 			.len = len + 1, | 
 | 			.buf = buf, | 
 | 		} | 
 | 	}; | 
 |  | 
 | 	if (len + 1 >= sizeof(buf)) { | 
 | 		dev_warn(&priv->i2c->dev, "wr reg=%04x: len=%d is too big!\n", | 
 | 			 reg, len + 1); | 
 | 		return -E2BIG; | 
 | 	} | 
 |  | 
 | 	cxd2841er_i2c_debug(priv, i2c_addr, reg, 1, data, len); | 
 | 	buf[0] = reg; | 
 | 	memcpy(&buf[1], data, len); | 
 |  | 
 | 	ret = i2c_transfer(priv->i2c, msg, 1); | 
 | 	if (ret >= 0 && ret != 1) | 
 | 		ret = -EIO; | 
 | 	if (ret < 0) { | 
 | 		dev_warn(&priv->i2c->dev, | 
 | 			"%s: i2c wr failed=%d addr=%02x reg=%02x len=%d\n", | 
 | 			KBUILD_MODNAME, ret, i2c_addr, reg, len); | 
 | 		return ret; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_write_reg(struct cxd2841er_priv *priv, | 
 | 			       u8 addr, u8 reg, u8 val) | 
 | { | 
 | 	u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */ | 
 |  | 
 | 	return cxd2841er_write_regs(priv, addr, reg, &tmp, 1); | 
 | } | 
 |  | 
 | static int cxd2841er_read_regs(struct cxd2841er_priv *priv, | 
 | 			       u8 addr, u8 reg, u8 *val, u32 len) | 
 | { | 
 | 	int ret; | 
 | 	u8 i2c_addr = (addr == I2C_SLVX ? | 
 | 		priv->i2c_addr_slvx : priv->i2c_addr_slvt); | 
 | 	struct i2c_msg msg[2] = { | 
 | 		{ | 
 | 			.addr = i2c_addr, | 
 | 			.flags = 0, | 
 | 			.len = 1, | 
 | 			.buf = ®, | 
 | 		}, { | 
 | 			.addr = i2c_addr, | 
 | 			.flags = I2C_M_RD, | 
 | 			.len = len, | 
 | 			.buf = val, | 
 | 		} | 
 | 	}; | 
 |  | 
 | 	ret = i2c_transfer(priv->i2c, msg, 2); | 
 | 	if (ret >= 0 && ret != 2) | 
 | 		ret = -EIO; | 
 | 	if (ret < 0) { | 
 | 		dev_warn(&priv->i2c->dev, | 
 | 			"%s: i2c rd failed=%d addr=%02x reg=%02x\n", | 
 | 			KBUILD_MODNAME, ret, i2c_addr, reg); | 
 | 		return ret; | 
 | 	} | 
 | 	cxd2841er_i2c_debug(priv, i2c_addr, reg, 0, val, len); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_reg(struct cxd2841er_priv *priv, | 
 | 			      u8 addr, u8 reg, u8 *val) | 
 | { | 
 | 	return cxd2841er_read_regs(priv, addr, reg, val, 1); | 
 | } | 
 |  | 
 | static int cxd2841er_set_reg_bits(struct cxd2841er_priv *priv, | 
 | 				  u8 addr, u8 reg, u8 data, u8 mask) | 
 | { | 
 | 	int res; | 
 | 	u8 rdata; | 
 |  | 
 | 	if (mask != 0xff) { | 
 | 		res = cxd2841er_read_reg(priv, addr, reg, &rdata); | 
 | 		if (res) | 
 | 			return res; | 
 | 		data = ((data & mask) | (rdata & (mask ^ 0xFF))); | 
 | 	} | 
 | 	return cxd2841er_write_reg(priv, addr, reg, data); | 
 | } | 
 |  | 
 | static u32 cxd2841er_calc_iffreq_xtal(enum cxd2841er_xtal xtal, u32 ifhz) | 
 | { | 
 | 	u64 tmp; | 
 |  | 
 | 	tmp = (u64) ifhz * 16777216; | 
 | 	do_div(tmp, ((xtal == SONY_XTAL_24000) ? 48000000 : 41000000)); | 
 |  | 
 | 	return (u32) tmp; | 
 | } | 
 |  | 
 | static u32 cxd2841er_calc_iffreq(u32 ifhz) | 
 | { | 
 | 	return cxd2841er_calc_iffreq_xtal(SONY_XTAL_20500, ifhz); | 
 | } | 
 |  | 
 | static int cxd2841er_get_if_hz(struct cxd2841er_priv *priv, u32 def_hz) | 
 | { | 
 | 	u32 hz; | 
 |  | 
 | 	if (priv->frontend.ops.tuner_ops.get_if_frequency | 
 | 			&& (priv->flags & CXD2841ER_AUTO_IFHZ)) | 
 | 		priv->frontend.ops.tuner_ops.get_if_frequency( | 
 | 			&priv->frontend, &hz); | 
 | 	else | 
 | 		hz = def_hz; | 
 |  | 
 | 	return hz; | 
 | } | 
 |  | 
 | static int cxd2841er_tuner_set(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	if ((priv->flags & CXD2841ER_USE_GATECTRL) && fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 1); | 
 | 	if (fe->ops.tuner_ops.set_params) | 
 | 		fe->ops.tuner_ops.set_params(fe); | 
 | 	if ((priv->flags & CXD2841ER_USE_GATECTRL) && fe->ops.i2c_gate_ctrl) | 
 | 		fe->ops.i2c_gate_ctrl(fe, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_dvbs2_set_symbol_rate(struct cxd2841er_priv *priv, | 
 | 					   u32 symbol_rate) | 
 | { | 
 | 	u32 reg_value = 0; | 
 | 	u8 data[3] = {0, 0, 0}; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	/* | 
 | 	 * regValue = (symbolRateKSps * 2^14 / 1000) + 0.5 | 
 | 	 *          = ((symbolRateKSps * 2^14) + 500) / 1000 | 
 | 	 *          = ((symbolRateKSps * 16384) + 500) / 1000 | 
 | 	 */ | 
 | 	reg_value = DIV_ROUND_CLOSEST(symbol_rate * 16384, 1000); | 
 | 	if ((reg_value == 0) || (reg_value > 0xFFFFF)) { | 
 | 		dev_err(&priv->i2c->dev, | 
 | 			"%s(): reg_value is out of range\n", __func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	data[0] = (u8)((reg_value >> 16) & 0x0F); | 
 | 	data[1] = (u8)((reg_value >>  8) & 0xFF); | 
 | 	data[2] = (u8)(reg_value & 0xFF); | 
 | 	/* Set SLV-T Bank : 0xAE */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xae); | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x20, data, 3); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void cxd2841er_set_ts_clock_mode(struct cxd2841er_priv *priv, | 
 | 					u8 system); | 
 |  | 
 | static int cxd2841er_sleep_s_to_active_s(struct cxd2841er_priv *priv, | 
 | 					 u8 system, u32 symbol_rate) | 
 | { | 
 | 	int ret; | 
 | 	u8 data[4] = { 0, 0, 0, 0 }; | 
 |  | 
 | 	if (priv->state != STATE_SLEEP_S) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, (int)priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	cxd2841er_set_ts_clock_mode(priv, SYS_DVBS); | 
 | 	/* Set demod mode */ | 
 | 	if (system == SYS_DVBS) { | 
 | 		data[0] = 0x0A; | 
 | 	} else if (system == SYS_DVBS2) { | 
 | 		data[0] = 0x0B; | 
 | 	} else { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid delsys %d\n", | 
 | 			__func__, system); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, data[0]); | 
 | 	/* DVB-S/S2 */ | 
 | 	data[0] = 0x00; | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Enable S/S2 auto detection 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2d, data[0]); | 
 | 	/* Set SLV-T Bank : 0xAE */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xae); | 
 | 	/* Enable S/S2 auto detection 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, data[0]); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Enable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x01); | 
 | 	/* Enable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x31, 0x01); | 
 | 	/* Enable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x63, 0x16); | 
 | 	/* Enable ADC 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x65, 0x3f); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Enable ADC 3 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x00); | 
 | 	/* Set SLV-T Bank : 0xA3 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa3); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xac, 0x00); | 
 | 	data[0] = 0x07; | 
 | 	data[1] = 0x3B; | 
 | 	data[2] = 0x08; | 
 | 	data[3] = 0xC5; | 
 | 	/* Set SLV-T Bank : 0xAB */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xab); | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x98, data, 4); | 
 | 	data[0] = 0x05; | 
 | 	data[1] = 0x80; | 
 | 	data[2] = 0x0A; | 
 | 	data[3] = 0x80; | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0xa8, data, 4); | 
 | 	data[0] = 0x0C; | 
 | 	data[1] = 0xCC; | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0xc3, data, 2); | 
 | 	/* Set demod parameter */ | 
 | 	ret = cxd2841er_dvbs2_set_symbol_rate(priv, symbol_rate); | 
 | 	if (ret != 0) | 
 | 		return ret; | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable Hi-Z setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x10); | 
 | 	/* disable Hi-Z setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0x00); | 
 | 	priv->state = STATE_ACTIVE_S; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_t_band(struct cxd2841er_priv *priv, | 
 | 					       u32 bandwidth); | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_t2_band(struct cxd2841er_priv *priv, | 
 | 						u32 bandwidth); | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_c_band(struct cxd2841er_priv *priv, | 
 | 					       u32 bandwidth); | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_i(struct cxd2841er_priv *priv, | 
 | 		u32 bandwidth); | 
 |  | 
 | static int cxd2841er_active_i_to_sleep_tc(struct cxd2841er_priv *priv); | 
 |  | 
 | static int cxd2841er_sleep_tc_to_shutdown(struct cxd2841er_priv *priv); | 
 |  | 
 | static int cxd2841er_shutdown_to_sleep_tc(struct cxd2841er_priv *priv); | 
 |  | 
 | static int cxd2841er_sleep_tc(struct dvb_frontend *fe); | 
 |  | 
 | static int cxd2841er_retune_active(struct cxd2841er_priv *priv, | 
 | 				   struct dtv_frontend_properties *p) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_S && | 
 | 			priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable TS output */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xc3, 0x01); | 
 | 	if (priv->state == STATE_ACTIVE_S) | 
 | 		return cxd2841er_dvbs2_set_symbol_rate( | 
 | 				priv, p->symbol_rate / 1000); | 
 | 	else if (priv->state == STATE_ACTIVE_TC) { | 
 | 		switch (priv->system) { | 
 | 		case SYS_DVBT: | 
 | 			return cxd2841er_sleep_tc_to_active_t_band( | 
 | 					priv, p->bandwidth_hz); | 
 | 		case SYS_DVBT2: | 
 | 			return cxd2841er_sleep_tc_to_active_t2_band( | 
 | 					priv, p->bandwidth_hz); | 
 | 		case SYS_DVBC_ANNEX_A: | 
 | 			return cxd2841er_sleep_tc_to_active_c_band( | 
 | 					priv, p->bandwidth_hz); | 
 | 		case SYS_ISDBT: | 
 | 			cxd2841er_active_i_to_sleep_tc(priv); | 
 | 			cxd2841er_sleep_tc_to_shutdown(priv); | 
 | 			cxd2841er_shutdown_to_sleep_tc(priv); | 
 | 			return cxd2841er_sleep_tc_to_active_i( | 
 | 					priv, p->bandwidth_hz); | 
 | 		} | 
 | 	} | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): invalid delivery system %d\n", | 
 | 		__func__, priv->system); | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int cxd2841er_active_s_to_sleep_s(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_S) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable TS output */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xc3, 0x01); | 
 | 	/* enable Hi-Z setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x1f); | 
 | 	/* enable Hi-Z setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0xff); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* disable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x01); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x31, 0x00); | 
 | 	/* disable ADC 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x63, 0x16); | 
 | 	/* disable ADC 3 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x65, 0x27); | 
 | 	/* SADC Bias ON */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x69, 0x06); | 
 | 	/* disable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x00); | 
 | 	/* Set SLV-T Bank : 0xAE */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xae); | 
 | 	/* disable S/S2 auto detection1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable S/S2 auto detection2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2d, 0x00); | 
 | 	priv->state = STATE_SLEEP_S; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_s_to_shutdown(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_SLEEP_S) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid demod state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable DSQOUT */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x3f); | 
 | 	/* Disable DSQIN */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x9c, 0x00); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Disable oscillator */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x15, 0x01); | 
 | 	/* Set demod mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, 0x01); | 
 | 	priv->state = STATE_SHUTDOWN; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_shutdown(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_SLEEP_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid demod state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Disable oscillator */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x15, 0x01); | 
 | 	/* Set demod mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, 0x01); | 
 | 	priv->state = STATE_SHUTDOWN; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_active_t_to_sleep_tc(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable TS output */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xc3, 0x01); | 
 | 	/* enable Hi-Z setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x3f); | 
 | 	/* enable Hi-Z setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0xff); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* disable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x01); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable ADC 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x43, 0x0a); | 
 | 	/* Disable ADC 3 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x0a); | 
 | 	/* Disable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Disable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00); | 
 | 	/* Disable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x00); | 
 | 	priv->state = STATE_SLEEP_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_active_t2_to_sleep_tc(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable TS output */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xc3, 0x01); | 
 | 	/* enable Hi-Z setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x3f); | 
 | 	/* enable Hi-Z setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0xff); | 
 | 	/* Cancel DVB-T2 setting */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x13); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x83, 0x40); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x86, 0x21); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x9e, 0x09, 0x0f); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x9f, 0xfb); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2a); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x38, 0x00, 0x0f); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2b); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x11, 0x00, 0x3f); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* disable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x01); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable ADC 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x43, 0x0a); | 
 | 	/* Disable ADC 3 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x0a); | 
 | 	/* Disable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Disable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00); | 
 | 	/* Disable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x00); | 
 | 	priv->state = STATE_SLEEP_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_active_c_to_sleep_tc(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable TS output */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xc3, 0x01); | 
 | 	/* enable Hi-Z setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x3f); | 
 | 	/* enable Hi-Z setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0xff); | 
 | 	/* Cancel DVB-C setting */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x11); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xa3, 0x00, 0x1f); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* disable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x01); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable ADC 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x43, 0x0a); | 
 | 	/* Disable ADC 3 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x0a); | 
 | 	/* Disable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Disable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00); | 
 | 	/* Disable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x00); | 
 | 	priv->state = STATE_SLEEP_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_active_i_to_sleep_tc(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* disable TS output */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xc3, 0x01); | 
 | 	/* enable Hi-Z setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x3f); | 
 | 	/* enable Hi-Z setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0xff); | 
 |  | 
 | 	/* TODO: Cancel demod parameter */ | 
 |  | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* disable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x01); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable ADC 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x43, 0x0a); | 
 | 	/* Disable ADC 3 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x0a); | 
 | 	/* Disable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Disable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00); | 
 | 	/* Disable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x00); | 
 | 	priv->state = STATE_SLEEP_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_shutdown_to_sleep_s(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_SHUTDOWN) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid demod state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Clear all demodulator registers */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x02, 0x00); | 
 | 	usleep_range(3000, 5000); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Set demod SW reset */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x10, 0x01); | 
 |  | 
 | 	switch (priv->xtal) { | 
 | 	case SONY_XTAL_20500: | 
 | 		cxd2841er_write_reg(priv, I2C_SLVX, 0x14, 0x00); | 
 | 		break; | 
 | 	case SONY_XTAL_24000: | 
 | 		/* Select demod frequency */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVX, 0x12, 0x00); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVX, 0x14, 0x03); | 
 | 		break; | 
 | 	case SONY_XTAL_41000: | 
 | 		cxd2841er_write_reg(priv, I2C_SLVX, 0x14, 0x01); | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid demod xtal %d\n", | 
 | 				__func__, priv->xtal); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Set demod mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, 0x0a); | 
 | 	/* Clear demod SW reset */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x10, 0x00); | 
 | 	usleep_range(1000, 2000); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* enable DSQOUT */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x1F); | 
 | 	/* enable DSQIN */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x9C, 0x40); | 
 | 	/* TADC Bias On */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x43, 0x0a); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x0a); | 
 | 	/* SADC Bias On */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x63, 0x16); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x65, 0x27); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x69, 0x06); | 
 | 	priv->state = STATE_SLEEP_S; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_shutdown_to_sleep_tc(struct cxd2841er_priv *priv) | 
 | { | 
 | 	u8 data = 0; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_SHUTDOWN) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid demod state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Clear all demodulator registers */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x02, 0x00); | 
 | 	usleep_range(3000, 5000); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Set demod SW reset */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x10, 0x01); | 
 |   /* Select ADC clock mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x13, 0x00); | 
 |  | 
 | 	switch (priv->xtal) { | 
 | 	case SONY_XTAL_20500: | 
 | 		data = 0x0; | 
 | 		break; | 
 | 	case SONY_XTAL_24000: | 
 | 		/* Select demod frequency */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVX, 0x12, 0x00); | 
 | 		data = 0x3; | 
 | 		break; | 
 | 	case SONY_XTAL_41000: | 
 | 		cxd2841er_write_reg(priv, I2C_SLVX, 0x12, 0x00); | 
 | 		data = 0x1; | 
 | 		break; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x14, data); | 
 | 	/* Clear demod SW reset */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x10, 0x00); | 
 | 	usleep_range(1000, 2000); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* TADC Bias On */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x43, 0x0a); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x0a); | 
 | 	/* SADC Bias On */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x63, 0x16); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x65, 0x27); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x69, 0x06); | 
 | 	priv->state = STATE_SLEEP_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_tune_done(struct cxd2841er_priv *priv) | 
 | { | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0, 0); | 
 | 	/* SW Reset */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xfe, 0x01); | 
 | 	/* Enable TS output */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xc3, 0x00); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Set TS parallel mode */ | 
 | static void cxd2841er_set_ts_clock_mode(struct cxd2841er_priv *priv, | 
 | 					u8 system) | 
 | { | 
 | 	u8 serial_ts, ts_rate_ctrl_off, ts_in_off; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0xc4, &serial_ts); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0xd3, &ts_rate_ctrl_off); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0xde, &ts_in_off); | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): ser_ts=0x%02x rate_ctrl_off=0x%02x in_off=0x%02x\n", | 
 | 		__func__, serial_ts, ts_rate_ctrl_off, ts_in_off); | 
 |  | 
 | 	/* | 
 | 	 * slave    Bank    Addr    Bit    default    Name | 
 | 	 * <SLV-T>  00h     C4h     [1:0]  2'b??      OSERCKMODE | 
 | 	 */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xc4, | 
 | 		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x01 : 0x00), 0x03); | 
 | 	/* | 
 | 	 * slave    Bank    Addr    Bit    default    Name | 
 | 	 * <SLV-T>  00h     D1h     [1:0]  2'b??      OSERDUTYMODE | 
 | 	 */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd1, | 
 | 		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x01 : 0x00), 0x03); | 
 | 	/* | 
 | 	 * slave    Bank    Addr    Bit    default    Name | 
 | 	 * <SLV-T>  00h     D9h     [7:0]  8'h08      OTSCKPERIOD | 
 | 	 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xd9, 0x08); | 
 | 	/* | 
 | 	 * Disable TS IF Clock | 
 | 	 * slave    Bank    Addr    Bit    default    Name | 
 | 	 * <SLV-T>  00h     32h     [0]    1'b1       OREG_CK_TSIF_EN | 
 | 	 */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x32, 0x00, 0x01); | 
 | 	/* | 
 | 	 * slave    Bank    Addr    Bit    default    Name | 
 | 	 * <SLV-T>  00h     33h     [1:0]  2'b01      OREG_CKSEL_TSIF | 
 | 	 */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x33, | 
 | 		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x01 : 0x00), 0x03); | 
 | 	/* | 
 | 	 * Enable TS IF Clock | 
 | 	 * slave    Bank    Addr    Bit    default    Name | 
 | 	 * <SLV-T>  00h     32h     [0]    1'b1       OREG_CK_TSIF_EN | 
 | 	 */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x32, 0x01, 0x01); | 
 |  | 
 | 	if (system == SYS_DVBT) { | 
 | 		/* Enable parity period for DVB-T */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x66, 0x01, 0x01); | 
 | 	} else if (system == SYS_DVBC_ANNEX_A) { | 
 | 		/* Enable parity period for DVB-C */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x66, 0x01, 0x01); | 
 | 	} | 
 | } | 
 |  | 
 | static u8 cxd2841er_chip_id(struct cxd2841er_priv *priv) | 
 | { | 
 | 	u8 chip_id = 0; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (cxd2841er_write_reg(priv, I2C_SLVT, 0, 0) == 0) | 
 | 		cxd2841er_read_reg(priv, I2C_SLVT, 0xfd, &chip_id); | 
 | 	else if (cxd2841er_write_reg(priv, I2C_SLVX, 0, 0) == 0) | 
 | 		cxd2841er_read_reg(priv, I2C_SLVX, 0xfd, &chip_id); | 
 |  | 
 | 	return chip_id; | 
 | } | 
 |  | 
 | static int cxd2841er_read_status_s(struct dvb_frontend *fe, | 
 | 				   enum fe_status *status) | 
 | { | 
 | 	u8 reg = 0; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	*status = 0; | 
 | 	if (priv->state != STATE_ACTIVE_S) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0xA0 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa0); | 
 | 	/* | 
 | 	 *  slave     Bank      Addr      Bit      Signal name | 
 | 	 * <SLV-T>    A0h       11h       [2]      ITSLOCK | 
 | 	 */ | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x11, ®); | 
 | 	if (reg & 0x04) { | 
 | 		*status = FE_HAS_SIGNAL | 
 | 			| FE_HAS_CARRIER | 
 | 			| FE_HAS_VITERBI | 
 | 			| FE_HAS_SYNC | 
 | 			| FE_HAS_LOCK; | 
 | 	} | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): result 0x%x\n", __func__, *status); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_status_t_t2(struct cxd2841er_priv *priv, | 
 | 				      u8 *sync, u8 *tslock, u8 *unlock) | 
 | { | 
 | 	u8 data = 0; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) | 
 | 		return -EINVAL; | 
 | 	if (priv->system == SYS_DVBT) { | 
 | 		/* Set SLV-T Bank : 0x10 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	} else { | 
 | 		/* Set SLV-T Bank : 0x20 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20); | 
 | 	} | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x10, &data); | 
 | 	if ((data & 0x07) == 0x07) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): invalid hardware state detected\n", __func__); | 
 | 		*sync = 0; | 
 | 		*tslock = 0; | 
 | 		*unlock = 0; | 
 | 	} else { | 
 | 		*sync = ((data & 0x07) == 0x6 ? 1 : 0); | 
 | 		*tslock = ((data & 0x20) ? 1 : 0); | 
 | 		*unlock = ((data & 0x10) ? 1 : 0); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_status_c(struct cxd2841er_priv *priv, u8 *tslock) | 
 | { | 
 | 	u8 data; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) | 
 | 		return -EINVAL; | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x88, &data); | 
 | 	if ((data & 0x01) == 0) { | 
 | 		*tslock = 0; | 
 | 	} else { | 
 | 		cxd2841er_read_reg(priv, I2C_SLVT, 0x10, &data); | 
 | 		*tslock = ((data & 0x20) ? 1 : 0); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_status_i(struct cxd2841er_priv *priv, | 
 | 		u8 *sync, u8 *tslock, u8 *unlock) | 
 | { | 
 | 	u8 data = 0; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) | 
 | 		return -EINVAL; | 
 | 	/* Set SLV-T Bank : 0x60 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x60); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x10, &data); | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): lock=0x%x\n", __func__, data); | 
 | 	*sync = ((data & 0x02) ? 1 : 0); | 
 | 	*tslock = ((data & 0x01) ? 1 : 0); | 
 | 	*unlock = ((data & 0x10) ? 1 : 0); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_status_tc(struct dvb_frontend *fe, | 
 | 				    enum fe_status *status) | 
 | { | 
 | 	int ret = 0; | 
 | 	u8 sync = 0; | 
 | 	u8 tslock = 0; | 
 | 	u8 unlock = 0; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	*status = 0; | 
 | 	if (priv->state == STATE_ACTIVE_TC) { | 
 | 		if (priv->system == SYS_DVBT || priv->system == SYS_DVBT2) { | 
 | 			ret = cxd2841er_read_status_t_t2( | 
 | 				priv, &sync, &tslock, &unlock); | 
 | 			if (ret) | 
 | 				goto done; | 
 | 			if (unlock) | 
 | 				goto done; | 
 | 			if (sync) | 
 | 				*status = FE_HAS_SIGNAL | | 
 | 					FE_HAS_CARRIER | | 
 | 					FE_HAS_VITERBI | | 
 | 					FE_HAS_SYNC; | 
 | 			if (tslock) | 
 | 				*status |= FE_HAS_LOCK; | 
 | 		} else if (priv->system == SYS_ISDBT) { | 
 | 			ret = cxd2841er_read_status_i( | 
 | 					priv, &sync, &tslock, &unlock); | 
 | 			if (ret) | 
 | 				goto done; | 
 | 			if (unlock) | 
 | 				goto done; | 
 | 			if (sync) | 
 | 				*status = FE_HAS_SIGNAL | | 
 | 					FE_HAS_CARRIER | | 
 | 					FE_HAS_VITERBI | | 
 | 					FE_HAS_SYNC; | 
 | 			if (tslock) | 
 | 				*status |= FE_HAS_LOCK; | 
 | 		} else if (priv->system == SYS_DVBC_ANNEX_A) { | 
 | 			ret = cxd2841er_read_status_c(priv, &tslock); | 
 | 			if (ret) | 
 | 				goto done; | 
 | 			if (tslock) | 
 | 				*status = FE_HAS_SIGNAL | | 
 | 					FE_HAS_CARRIER | | 
 | 					FE_HAS_VITERBI | | 
 | 					FE_HAS_SYNC | | 
 | 					FE_HAS_LOCK; | 
 | 		} | 
 | 	} | 
 | done: | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): status 0x%x\n", __func__, *status); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int cxd2841er_get_carrier_offset_s_s2(struct cxd2841er_priv *priv, | 
 | 					     int *offset) | 
 | { | 
 | 	u8 data[3]; | 
 | 	u8 is_hs_mode; | 
 | 	s32 cfrl_ctrlval; | 
 | 	s32 temp_div, temp_q, temp_r; | 
 |  | 
 | 	if (priv->state != STATE_ACTIVE_S) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* | 
 | 	 * Get High Sampling Rate mode | 
 | 	 *  slave     Bank      Addr      Bit      Signal name | 
 | 	 * <SLV-T>    A0h       10h       [0]      ITRL_LOCK | 
 | 	 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa0); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x10, &data[0]); | 
 | 	if (data[0] & 0x01) { | 
 | 		/* | 
 | 		 *  slave     Bank      Addr      Bit      Signal name | 
 | 		 * <SLV-T>    A0h       50h       [4]      IHSMODE | 
 | 		 */ | 
 | 		cxd2841er_read_reg(priv, I2C_SLVT, 0x50, &data[0]); | 
 | 		is_hs_mode = (data[0] & 0x10 ? 1 : 0); | 
 | 	} else { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): unable to detect sampling rate mode\n", | 
 | 			__func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* | 
 | 	 *  slave     Bank      Addr      Bit      Signal name | 
 | 	 * <SLV-T>    A0h       45h       [4:0]    ICFRL_CTRLVAL[20:16] | 
 | 	 * <SLV-T>    A0h       46h       [7:0]    ICFRL_CTRLVAL[15:8] | 
 | 	 * <SLV-T>    A0h       47h       [7:0]    ICFRL_CTRLVAL[7:0] | 
 | 	 */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x45, data, 3); | 
 | 	cfrl_ctrlval = sign_extend32((((u32)data[0] & 0x1F) << 16) | | 
 | 				(((u32)data[1] & 0xFF) <<  8) | | 
 | 				((u32)data[2] & 0xFF), 20); | 
 | 	temp_div = (is_hs_mode ? 1048576 : 1572864); | 
 | 	if (cfrl_ctrlval > 0) { | 
 | 		temp_q = div_s64_rem(97375LL * cfrl_ctrlval, | 
 | 			temp_div, &temp_r); | 
 | 	} else { | 
 | 		temp_q = div_s64_rem(-97375LL * cfrl_ctrlval, | 
 | 			temp_div, &temp_r); | 
 | 	} | 
 | 	if (temp_r >= temp_div / 2) | 
 | 		temp_q++; | 
 | 	if (cfrl_ctrlval > 0) | 
 | 		temp_q *= -1; | 
 | 	*offset = temp_q; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_get_carrier_offset_i(struct cxd2841er_priv *priv, | 
 | 					   u32 bandwidth, int *offset) | 
 | { | 
 | 	u8 data[4]; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (priv->system != SYS_ISDBT) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid delivery system %d\n", | 
 | 			__func__, priv->system); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x60); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x4c, data, sizeof(data)); | 
 | 	*offset = -1 * sign_extend32( | 
 | 		((u32)(data[0] & 0x1F) << 24) | ((u32)data[1] << 16) | | 
 | 		((u32)data[2] << 8) | (u32)data[3], 29); | 
 |  | 
 | 	switch (bandwidth) { | 
 | 	case 6000000: | 
 | 		*offset = -1 * ((*offset) * 8/264); | 
 | 		break; | 
 | 	case 7000000: | 
 | 		*offset = -1 * ((*offset) * 8/231); | 
 | 		break; | 
 | 	case 8000000: | 
 | 		*offset = -1 * ((*offset) * 8/198); | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid bandwidth %d\n", | 
 | 				__func__, bandwidth); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): bandwidth %d offset %d\n", | 
 | 			__func__, bandwidth, *offset); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_get_carrier_offset_t(struct cxd2841er_priv *priv, | 
 | 					   u32 bandwidth, int *offset) | 
 | { | 
 | 	u8 data[4]; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (priv->system != SYS_DVBT) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid delivery system %d\n", | 
 | 			__func__, priv->system); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x4c, data, sizeof(data)); | 
 | 	*offset = -1 * sign_extend32( | 
 | 		((u32)(data[0] & 0x1F) << 24) | ((u32)data[1] << 16) | | 
 | 		((u32)data[2] << 8) | (u32)data[3], 29); | 
 | 	*offset *= (bandwidth / 1000000); | 
 | 	*offset /= 235; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_get_carrier_offset_t2(struct cxd2841er_priv *priv, | 
 | 					   u32 bandwidth, int *offset) | 
 | { | 
 | 	u8 data[4]; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (priv->system != SYS_DVBT2) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid delivery system %d\n", | 
 | 			__func__, priv->system); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x4c, data, sizeof(data)); | 
 | 	*offset = -1 * sign_extend32( | 
 | 		((u32)(data[0] & 0x0F) << 24) | ((u32)data[1] << 16) | | 
 | 		((u32)data[2] << 8) | (u32)data[3], 27); | 
 | 	switch (bandwidth) { | 
 | 	case 1712000: | 
 | 		*offset /= 582; | 
 | 		break; | 
 | 	case 5000000: | 
 | 	case 6000000: | 
 | 	case 7000000: | 
 | 	case 8000000: | 
 | 		*offset *= (bandwidth / 1000000); | 
 | 		*offset /= 940; | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid bandwidth %d\n", | 
 | 			__func__, bandwidth); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_get_carrier_offset_c(struct cxd2841er_priv *priv, | 
 | 					  int *offset) | 
 | { | 
 | 	u8 data[2]; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	if (priv->system != SYS_DVBC_ANNEX_A) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid delivery system %d\n", | 
 | 			__func__, priv->system); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x15, data, sizeof(data)); | 
 | 	*offset = div_s64(41000LL * sign_extend32((((u32)data[0] & 0x3f) << 8) | 
 | 						| (u32)data[1], 13), 16384); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_packet_errors_c( | 
 | 		struct cxd2841er_priv *priv, u32 *penum) | 
 | { | 
 | 	u8 data[3]; | 
 |  | 
 | 	*penum = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0xea, data, sizeof(data)); | 
 | 	if (data[2] & 0x01) | 
 | 		*penum = ((u32)data[0] << 8) | (u32)data[1]; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_packet_errors_t( | 
 | 		struct cxd2841er_priv *priv, u32 *penum) | 
 | { | 
 | 	u8 data[3]; | 
 |  | 
 | 	*penum = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0xea, data, sizeof(data)); | 
 | 	if (data[2] & 0x01) | 
 | 		*penum = ((u32)data[0] << 8) | (u32)data[1]; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_packet_errors_t2( | 
 | 		struct cxd2841er_priv *priv, u32 *penum) | 
 | { | 
 | 	u8 data[3]; | 
 |  | 
 | 	*penum = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x24); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0xfd, data, sizeof(data)); | 
 | 	if (data[0] & 0x01) | 
 | 		*penum = ((u32)data[1] << 8) | (u32)data[2]; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_packet_errors_i( | 
 | 		struct cxd2841er_priv *priv, u32 *penum) | 
 | { | 
 | 	u8 data[2]; | 
 |  | 
 | 	*penum = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x60); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0xA1, data, 1); | 
 |  | 
 | 	if (!(data[0] & 0x01)) | 
 | 		return 0; | 
 |  | 
 | 	/* Layer A */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0xA2, data, sizeof(data)); | 
 | 	*penum = ((u32)data[0] << 8) | (u32)data[1]; | 
 |  | 
 | 	/* Layer B */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0xA4, data, sizeof(data)); | 
 | 	*penum += ((u32)data[0] << 8) | (u32)data[1]; | 
 |  | 
 | 	/* Layer C */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0xA6, data, sizeof(data)); | 
 | 	*penum += ((u32)data[0] << 8) | (u32)data[1]; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_ber_c(struct cxd2841er_priv *priv, | 
 | 		u32 *bit_error, u32 *bit_count) | 
 | { | 
 | 	u8 data[3]; | 
 | 	u32 bit_err, period_exp; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x62, data, sizeof(data)); | 
 | 	if (!(data[0] & 0x80)) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): no valid BER data\n", __func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	bit_err = ((u32)(data[0] & 0x3f) << 16) | | 
 | 		((u32)data[1] << 8) | | 
 | 		(u32)data[2]; | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x60, data); | 
 | 	period_exp = data[0] & 0x1f; | 
 |  | 
 | 	if ((period_exp <= 11) && (bit_err > (1 << period_exp) * 204 * 8)) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): period_exp(%u) or bit_err(%u)  not in range. no valid BER data\n", | 
 | 				__func__, period_exp, bit_err); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): period_exp(%u) or bit_err(%u) count=%d\n", | 
 | 			__func__, period_exp, bit_err, | 
 | 			((1 << period_exp) * 204 * 8)); | 
 |  | 
 | 	*bit_error = bit_err; | 
 | 	*bit_count = ((1 << period_exp) * 204 * 8); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_ber_i(struct cxd2841er_priv *priv, | 
 | 		u32 *bit_error, u32 *bit_count) | 
 | { | 
 | 	u8 data[3]; | 
 | 	u8 pktnum[2]; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	cxd2841er_freeze_regs(priv); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x60); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x5B, pktnum, sizeof(pktnum)); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x16, data, sizeof(data)); | 
 | 	cxd2841er_unfreeze_regs(priv); | 
 |  | 
 | 	if (!pktnum[0] && !pktnum[1]) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): no valid BER data\n", __func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	*bit_error = ((u32)(data[0] & 0x7F) << 16) | | 
 | 		((u32)data[1] << 8) | data[2]; | 
 | 	*bit_count = ((((u32)pktnum[0] << 8) | pktnum[1]) * 204 * 8); | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): bit_error=%u bit_count=%u\n", | 
 | 			__func__, *bit_error, *bit_count); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_mon_read_ber_s(struct cxd2841er_priv *priv, | 
 | 				    u32 *bit_error, u32 *bit_count) | 
 | { | 
 | 	u8 data[11]; | 
 |  | 
 | 	/* Set SLV-T Bank : 0xA0 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa0); | 
 | 	/* | 
 | 	 *  slave     Bank      Addr      Bit      Signal name | 
 | 	 * <SLV-T>    A0h       35h       [0]      IFVBER_VALID | 
 | 	 * <SLV-T>    A0h       36h       [5:0]    IFVBER_BITERR[21:16] | 
 | 	 * <SLV-T>    A0h       37h       [7:0]    IFVBER_BITERR[15:8] | 
 | 	 * <SLV-T>    A0h       38h       [7:0]    IFVBER_BITERR[7:0] | 
 | 	 * <SLV-T>    A0h       3Dh       [5:0]    IFVBER_BITNUM[21:16] | 
 | 	 * <SLV-T>    A0h       3Eh       [7:0]    IFVBER_BITNUM[15:8] | 
 | 	 * <SLV-T>    A0h       3Fh       [7:0]    IFVBER_BITNUM[7:0] | 
 | 	 */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x35, data, 11); | 
 | 	if (data[0] & 0x01) { | 
 | 		*bit_error = ((u32)(data[1]  & 0x3F) << 16) | | 
 | 			     ((u32)(data[2]  & 0xFF) <<  8) | | 
 | 			     (u32)(data[3]  & 0xFF); | 
 | 		*bit_count = ((u32)(data[8]  & 0x3F) << 16) | | 
 | 			     ((u32)(data[9]  & 0xFF) <<  8) | | 
 | 			     (u32)(data[10] & 0xFF); | 
 | 		if ((*bit_count == 0) || (*bit_error > *bit_count)) { | 
 | 			dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): invalid bit_error %d, bit_count %d\n", | 
 | 				__func__, *bit_error, *bit_count); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): no data available\n", __func__); | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 |  | 
 | static int cxd2841er_mon_read_ber_s2(struct cxd2841er_priv *priv, | 
 | 				     u32 *bit_error, u32 *bit_count) | 
 | { | 
 | 	u8 data[5]; | 
 | 	u32 period; | 
 |  | 
 | 	/* Set SLV-T Bank : 0xB2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xb2); | 
 | 	/* | 
 | 	 *  slave     Bank      Addr      Bit      Signal name | 
 | 	 * <SLV-T>    B2h       30h       [0]      IFLBER_VALID | 
 | 	 * <SLV-T>    B2h       31h       [3:0]    IFLBER_BITERR[27:24] | 
 | 	 * <SLV-T>    B2h       32h       [7:0]    IFLBER_BITERR[23:16] | 
 | 	 * <SLV-T>    B2h       33h       [7:0]    IFLBER_BITERR[15:8] | 
 | 	 * <SLV-T>    B2h       34h       [7:0]    IFLBER_BITERR[7:0] | 
 | 	 */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x30, data, 5); | 
 | 	if (data[0] & 0x01) { | 
 | 		/* Bit error count */ | 
 | 		*bit_error = ((u32)(data[1] & 0x0F) << 24) | | 
 | 			     ((u32)(data[2] & 0xFF) << 16) | | 
 | 			     ((u32)(data[3] & 0xFF) <<  8) | | 
 | 			     (u32)(data[4] & 0xFF); | 
 |  | 
 | 		/* Set SLV-T Bank : 0xA0 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa0); | 
 | 		cxd2841er_read_reg(priv, I2C_SLVT, 0x7a, data); | 
 | 		/* Measurement period */ | 
 | 		period = (u32)(1 << (data[0] & 0x0F)); | 
 | 		if (period == 0) { | 
 | 			dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): period is 0\n", __func__); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		if (*bit_error > (period * 64800)) { | 
 | 			dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): invalid bit_err 0x%x period 0x%x\n", | 
 | 				__func__, *bit_error, period); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		*bit_count = period * 64800; | 
 |  | 
 | 		return 0; | 
 | 	} else { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): no data available\n", __func__); | 
 | 	} | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int cxd2841er_read_ber_t2(struct cxd2841er_priv *priv, | 
 | 				 u32 *bit_error, u32 *bit_count) | 
 | { | 
 | 	u8 data[4]; | 
 | 	u32 period_exp, n_ldpc; | 
 |  | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): invalid state %d\n", __func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x39, data, sizeof(data)); | 
 | 	if (!(data[0] & 0x10)) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): no valid BER data\n", __func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	*bit_error = ((u32)(data[0] & 0x0f) << 24) | | 
 | 		     ((u32)data[1] << 16) | | 
 | 		     ((u32)data[2] << 8) | | 
 | 		     (u32)data[3]; | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x6f, data); | 
 | 	period_exp = data[0] & 0x0f; | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x22); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x5e, data); | 
 | 	n_ldpc = ((data[0] & 0x03) == 0 ? 16200 : 64800); | 
 | 	if (*bit_error > ((1U << period_exp) * n_ldpc)) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): invalid BER value\n", __func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * FIXME: the right thing would be to return bit_error untouched, | 
 | 	 * but, as we don't know the scale returned by the counters, let's | 
 | 	 * at least preserver BER = bit_error/bit_count. | 
 | 	 */ | 
 | 	if (period_exp >= 4) { | 
 | 		*bit_count = (1U << (period_exp - 4)) * (n_ldpc / 200); | 
 | 		*bit_error *= 3125ULL; | 
 | 	} else { | 
 | 		*bit_count = (1U << period_exp) * (n_ldpc / 200); | 
 | 		*bit_error *= 50000ULL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_ber_t(struct cxd2841er_priv *priv, | 
 | 				u32 *bit_error, u32 *bit_count) | 
 | { | 
 | 	u8 data[2]; | 
 | 	u32 period; | 
 |  | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): invalid state %d\n", __func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x39, data); | 
 | 	if (!(data[0] & 0x01)) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): no valid BER data\n", __func__); | 
 | 		return 0; | 
 | 	} | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x22, data, sizeof(data)); | 
 | 	*bit_error = ((u32)data[0] << 8) | (u32)data[1]; | 
 | 	cxd2841er_read_reg(priv, I2C_SLVT, 0x6f, data); | 
 | 	period = ((data[0] & 0x07) == 0) ? 256 : (4096 << (data[0] & 0x07)); | 
 |  | 
 | 	/* | 
 | 	 * FIXME: the right thing would be to return bit_error untouched, | 
 | 	 * but, as we don't know the scale returned by the counters, let's | 
 | 	 * at least preserver BER = bit_error/bit_count. | 
 | 	 */ | 
 | 	*bit_count = period / 128; | 
 | 	*bit_error *= 78125ULL; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_freeze_regs(struct cxd2841er_priv *priv) | 
 | { | 
 | 	/* | 
 | 	 * Freeze registers: ensure multiple separate register reads | 
 | 	 * are from the same snapshot | 
 | 	 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x01, 0x01); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_unfreeze_regs(struct cxd2841er_priv *priv) | 
 | { | 
 | 	/* | 
 | 	 * un-freeze registers | 
 | 	 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x01, 0x00); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u32 cxd2841er_dvbs_read_snr(struct cxd2841er_priv *priv, | 
 | 		u8 delsys, u32 *snr) | 
 | { | 
 | 	u8 data[3]; | 
 | 	u32 res = 0, value; | 
 | 	int min_index, max_index, index; | 
 | 	static const struct cxd2841er_cnr_data *cn_data; | 
 |  | 
 | 	cxd2841er_freeze_regs(priv); | 
 | 	/* Set SLV-T Bank : 0xA1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa1); | 
 | 	/* | 
 | 	 *  slave     Bank      Addr      Bit     Signal name | 
 | 	 * <SLV-T>    A1h       10h       [0]     ICPM_QUICKRDY | 
 | 	 * <SLV-T>    A1h       11h       [4:0]   ICPM_QUICKCNDT[12:8] | 
 | 	 * <SLV-T>    A1h       12h       [7:0]   ICPM_QUICKCNDT[7:0] | 
 | 	 */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x10, data, 3); | 
 | 	cxd2841er_unfreeze_regs(priv); | 
 |  | 
 | 	if (data[0] & 0x01) { | 
 | 		value = ((u32)(data[1] & 0x1F) << 8) | (u32)(data[2] & 0xFF); | 
 | 		min_index = 0; | 
 | 		if (delsys == SYS_DVBS) { | 
 | 			cn_data = s_cn_data; | 
 | 			max_index = ARRAY_SIZE(s_cn_data) - 1; | 
 | 		} else { | 
 | 			cn_data = s2_cn_data; | 
 | 			max_index = ARRAY_SIZE(s2_cn_data) - 1; | 
 | 		} | 
 | 		if (value >= cn_data[min_index].value) { | 
 | 			res = cn_data[min_index].cnr_x1000; | 
 | 			goto done; | 
 | 		} | 
 | 		if (value <= cn_data[max_index].value) { | 
 | 			res = cn_data[max_index].cnr_x1000; | 
 | 			goto done; | 
 | 		} | 
 | 		while ((max_index - min_index) > 1) { | 
 | 			index = (max_index + min_index) / 2; | 
 | 			if (value == cn_data[index].value) { | 
 | 				res = cn_data[index].cnr_x1000; | 
 | 				goto done; | 
 | 			} else if (value > cn_data[index].value) | 
 | 				max_index = index; | 
 | 			else | 
 | 				min_index = index; | 
 | 			if ((max_index - min_index) <= 1) { | 
 | 				if (value == cn_data[max_index].value) { | 
 | 					res = cn_data[max_index].cnr_x1000; | 
 | 					goto done; | 
 | 				} else { | 
 | 					res = cn_data[min_index].cnr_x1000; | 
 | 					goto done; | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): no data available\n", __func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 | done: | 
 | 	*snr = res; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static uint32_t sony_log(uint32_t x) | 
 | { | 
 | 	return (((10000>>8)*(intlog2(x)>>16) + LOG2_E_100X/2)/LOG2_E_100X); | 
 | } | 
 |  | 
 | static int cxd2841er_read_snr_c(struct cxd2841er_priv *priv, u32 *snr) | 
 | { | 
 | 	u32 reg; | 
 | 	u8 data[2]; | 
 | 	enum sony_dvbc_constellation_t qam = SONY_DVBC_CONSTELLATION_16QAM; | 
 |  | 
 | 	*snr = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	cxd2841er_freeze_regs(priv); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x19, data, 1); | 
 | 	qam = (enum sony_dvbc_constellation_t) (data[0] & 0x07); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x4C, data, 2); | 
 | 	cxd2841er_unfreeze_regs(priv); | 
 |  | 
 | 	reg = ((u32)(data[0]&0x1f) << 8) | (u32)data[1]; | 
 | 	if (reg == 0) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): reg value out of range\n", __func__); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	switch (qam) { | 
 | 	case SONY_DVBC_CONSTELLATION_16QAM: | 
 | 	case SONY_DVBC_CONSTELLATION_64QAM: | 
 | 	case SONY_DVBC_CONSTELLATION_256QAM: | 
 | 		/* SNR(dB) = -9.50 * ln(IREG_SNR_ESTIMATE / (24320)) */ | 
 | 		if (reg < 126) | 
 | 			reg = 126; | 
 | 		*snr = -95 * (int32_t)sony_log(reg) + 95941; | 
 | 		break; | 
 | 	case SONY_DVBC_CONSTELLATION_32QAM: | 
 | 	case SONY_DVBC_CONSTELLATION_128QAM: | 
 | 		/* SNR(dB) = -8.75 * ln(IREG_SNR_ESTIMATE / (20800)) */ | 
 | 		if (reg < 69) | 
 | 			reg = 69; | 
 | 		*snr = -88 * (int32_t)sony_log(reg) + 86999; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_snr_t(struct cxd2841er_priv *priv, u32 *snr) | 
 | { | 
 | 	u32 reg; | 
 | 	u8 data[2]; | 
 |  | 
 | 	*snr = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): invalid state %d\n", __func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	cxd2841er_freeze_regs(priv); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x28, data, sizeof(data)); | 
 | 	cxd2841er_unfreeze_regs(priv); | 
 |  | 
 | 	reg = ((u32)data[0] << 8) | (u32)data[1]; | 
 | 	if (reg == 0) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): reg value out of range\n", __func__); | 
 | 		return 0; | 
 | 	} | 
 | 	if (reg > 4996) | 
 | 		reg = 4996; | 
 | 	*snr = 100 * ((INTLOG10X100(reg) - INTLOG10X100(5350 - reg)) + 285); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_snr_t2(struct cxd2841er_priv *priv, u32 *snr) | 
 | { | 
 | 	u32 reg; | 
 | 	u8 data[2]; | 
 |  | 
 | 	*snr = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): invalid state %d\n", __func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	cxd2841er_freeze_regs(priv); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x28, data, sizeof(data)); | 
 | 	cxd2841er_unfreeze_regs(priv); | 
 |  | 
 | 	reg = ((u32)data[0] << 8) | (u32)data[1]; | 
 | 	if (reg == 0) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): reg value out of range\n", __func__); | 
 | 		return 0; | 
 | 	} | 
 | 	if (reg > 10876) | 
 | 		reg = 10876; | 
 | 	*snr = 100 * ((INTLOG10X100(reg) - INTLOG10X100(12600 - reg)) + 320); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_read_snr_i(struct cxd2841er_priv *priv, u32 *snr) | 
 | { | 
 | 	u32 reg; | 
 | 	u8 data[2]; | 
 |  | 
 | 	*snr = 0; | 
 | 	if (priv->state != STATE_ACTIVE_TC) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): invalid state %d\n", __func__, | 
 | 				priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	cxd2841er_freeze_regs(priv); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x60); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x28, data, sizeof(data)); | 
 | 	cxd2841er_unfreeze_regs(priv); | 
 |  | 
 | 	reg = ((u32)data[0] << 8) | (u32)data[1]; | 
 | 	if (reg == 0) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): reg value out of range\n", __func__); | 
 | 		return 0; | 
 | 	} | 
 | 	*snr = 10000 * (intlog10(reg) >> 24) - 9031; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u16 cxd2841er_read_agc_gain_c(struct cxd2841er_priv *priv, | 
 | 					u8 delsys) | 
 | { | 
 | 	u8 data[2]; | 
 |  | 
 | 	cxd2841er_write_reg( | 
 | 		priv, I2C_SLVT, 0x00, 0x40); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x49, data, 2); | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): AGC value=%u\n", | 
 | 			__func__, (((u16)data[0] & 0x0F) << 8) | | 
 | 			(u16)(data[1] & 0xFF)); | 
 | 	return ((((u16)data[0] & 0x0F) << 8) | (u16)(data[1] & 0xFF)) << 4; | 
 | } | 
 |  | 
 | static u16 cxd2841er_read_agc_gain_t_t2(struct cxd2841er_priv *priv, | 
 | 					u8 delsys) | 
 | { | 
 | 	u8 data[2]; | 
 |  | 
 | 	cxd2841er_write_reg( | 
 | 		priv, I2C_SLVT, 0x00, (delsys == SYS_DVBT ? 0x10 : 0x20)); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x26, data, 2); | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): AGC value=%u\n", | 
 | 			__func__, (((u16)data[0] & 0x0F) << 8) | | 
 | 			(u16)(data[1] & 0xFF)); | 
 | 	return ((((u16)data[0] & 0x0F) << 8) | (u16)(data[1] & 0xFF)) << 4; | 
 | } | 
 |  | 
 | static u16 cxd2841er_read_agc_gain_i(struct cxd2841er_priv *priv, | 
 | 		u8 delsys) | 
 | { | 
 | 	u8 data[2]; | 
 |  | 
 | 	cxd2841er_write_reg( | 
 | 			priv, I2C_SLVT, 0x00, 0x60); | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x26, data, 2); | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): AGC value=%u\n", | 
 | 			__func__, (((u16)data[0] & 0x0F) << 8) | | 
 | 			(u16)(data[1] & 0xFF)); | 
 | 	return ((((u16)data[0] & 0x0F) << 8) | (u16)(data[1] & 0xFF)) << 4; | 
 | } | 
 |  | 
 | static u16 cxd2841er_read_agc_gain_s(struct cxd2841er_priv *priv) | 
 | { | 
 | 	u8 data[2]; | 
 |  | 
 | 	/* Set SLV-T Bank : 0xA0 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa0); | 
 | 	/* | 
 | 	 *  slave     Bank      Addr      Bit       Signal name | 
 | 	 * <SLV-T>    A0h       1Fh       [4:0]     IRFAGC_GAIN[12:8] | 
 | 	 * <SLV-T>    A0h       20h       [7:0]     IRFAGC_GAIN[7:0] | 
 | 	 */ | 
 | 	cxd2841er_read_regs(priv, I2C_SLVT, 0x1f, data, 2); | 
 | 	return ((((u16)data[0] & 0x1F) << 8) | (u16)(data[1] & 0xFF)) << 3; | 
 | } | 
 |  | 
 | static void cxd2841er_read_ber(struct dvb_frontend *fe) | 
 | { | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	u32 ret, bit_error = 0, bit_count = 0; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	switch (p->delivery_system) { | 
 | 	case SYS_DVBC_ANNEX_A: | 
 | 	case SYS_DVBC_ANNEX_B: | 
 | 	case SYS_DVBC_ANNEX_C: | 
 | 		ret = cxd2841er_read_ber_c(priv, &bit_error, &bit_count); | 
 | 		break; | 
 | 	case SYS_ISDBT: | 
 | 		ret = cxd2841er_read_ber_i(priv, &bit_error, &bit_count); | 
 | 		break; | 
 | 	case SYS_DVBS: | 
 | 		ret = cxd2841er_mon_read_ber_s(priv, &bit_error, &bit_count); | 
 | 		break; | 
 | 	case SYS_DVBS2: | 
 | 		ret = cxd2841er_mon_read_ber_s2(priv, &bit_error, &bit_count); | 
 | 		break; | 
 | 	case SYS_DVBT: | 
 | 		ret = cxd2841er_read_ber_t(priv, &bit_error, &bit_count); | 
 | 		break; | 
 | 	case SYS_DVBT2: | 
 | 		ret = cxd2841er_read_ber_t2(priv, &bit_error, &bit_count); | 
 | 		break; | 
 | 	default: | 
 | 		p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (!ret) { | 
 | 		p->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; | 
 | 		p->post_bit_error.stat[0].uvalue += bit_error; | 
 | 		p->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; | 
 | 		p->post_bit_count.stat[0].uvalue += bit_count; | 
 | 	} else { | 
 | 		p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	} | 
 | } | 
 |  | 
 | static void cxd2841er_read_signal_strength(struct dvb_frontend *fe) | 
 | { | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	s32 strength; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	switch (p->delivery_system) { | 
 | 	case SYS_DVBT: | 
 | 	case SYS_DVBT2: | 
 | 		strength = cxd2841er_read_agc_gain_t_t2(priv, | 
 | 							p->delivery_system); | 
 | 		p->strength.stat[0].scale = FE_SCALE_DECIBEL; | 
 | 		/* Formula was empirically determinated @ 410 MHz */ | 
 | 		p->strength.stat[0].uvalue = strength * 366 / 100 - 89520; | 
 | 		break;	/* Code moved out of the function */ | 
 | 	case SYS_DVBC_ANNEX_A: | 
 | 	case SYS_DVBC_ANNEX_B: | 
 | 	case SYS_DVBC_ANNEX_C: | 
 | 		strength = cxd2841er_read_agc_gain_c(priv, | 
 | 							p->delivery_system); | 
 | 		p->strength.stat[0].scale = FE_SCALE_DECIBEL; | 
 | 		/* | 
 | 		 * Formula was empirically determinated via linear regression, | 
 | 		 * using frequencies: 175 MHz, 410 MHz and 800 MHz, and a | 
 | 		 * stream modulated with QAM64 | 
 | 		 */ | 
 | 		p->strength.stat[0].uvalue = strength * 4045 / 1000 - 85224; | 
 | 		break; | 
 | 	case SYS_ISDBT: | 
 | 		strength = cxd2841er_read_agc_gain_i(priv, p->delivery_system); | 
 | 		p->strength.stat[0].scale = FE_SCALE_DECIBEL; | 
 | 		/* | 
 | 		 * Formula was empirically determinated via linear regression, | 
 | 		 * using frequencies: 175 MHz, 410 MHz and 800 MHz. | 
 | 		 */ | 
 | 		p->strength.stat[0].uvalue = strength * 3775 / 1000 - 90185; | 
 | 		break; | 
 | 	case SYS_DVBS: | 
 | 	case SYS_DVBS2: | 
 | 		strength = 65535 - cxd2841er_read_agc_gain_s(priv); | 
 | 		p->strength.stat[0].scale = FE_SCALE_RELATIVE; | 
 | 		p->strength.stat[0].uvalue = strength; | 
 | 		break; | 
 | 	default: | 
 | 		p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static void cxd2841er_read_snr(struct dvb_frontend *fe) | 
 | { | 
 | 	u32 tmp = 0; | 
 | 	int ret = 0; | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	switch (p->delivery_system) { | 
 | 	case SYS_DVBC_ANNEX_A: | 
 | 	case SYS_DVBC_ANNEX_B: | 
 | 	case SYS_DVBC_ANNEX_C: | 
 | 		ret = cxd2841er_read_snr_c(priv, &tmp); | 
 | 		break; | 
 | 	case SYS_DVBT: | 
 | 		ret = cxd2841er_read_snr_t(priv, &tmp); | 
 | 		break; | 
 | 	case SYS_DVBT2: | 
 | 		ret = cxd2841er_read_snr_t2(priv, &tmp); | 
 | 		break; | 
 | 	case SYS_ISDBT: | 
 | 		ret = cxd2841er_read_snr_i(priv, &tmp); | 
 | 		break; | 
 | 	case SYS_DVBS: | 
 | 	case SYS_DVBS2: | 
 | 		ret = cxd2841er_dvbs_read_snr(priv, p->delivery_system, &tmp); | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): unknown delivery system %d\n", | 
 | 			__func__, p->delivery_system); | 
 | 		p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): snr=%d\n", | 
 | 			__func__, (int32_t)tmp); | 
 |  | 
 | 	if (!ret) { | 
 | 		p->cnr.stat[0].scale = FE_SCALE_DECIBEL; | 
 | 		p->cnr.stat[0].svalue = tmp; | 
 | 	} else { | 
 | 		p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	} | 
 | } | 
 |  | 
 | static void cxd2841er_read_ucblocks(struct dvb_frontend *fe) | 
 | { | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	u32 ucblocks = 0; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	switch (p->delivery_system) { | 
 | 	case SYS_DVBC_ANNEX_A: | 
 | 	case SYS_DVBC_ANNEX_B: | 
 | 	case SYS_DVBC_ANNEX_C: | 
 | 		cxd2841er_read_packet_errors_c(priv, &ucblocks); | 
 | 		break; | 
 | 	case SYS_DVBT: | 
 | 		cxd2841er_read_packet_errors_t(priv, &ucblocks); | 
 | 		break; | 
 | 	case SYS_DVBT2: | 
 | 		cxd2841er_read_packet_errors_t2(priv, &ucblocks); | 
 | 		break; | 
 | 	case SYS_ISDBT: | 
 | 		cxd2841er_read_packet_errors_i(priv, &ucblocks); | 
 | 		break; | 
 | 	default: | 
 | 		p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		return; | 
 | 	} | 
 | 	dev_dbg(&priv->i2c->dev, "%s() ucblocks=%u\n", __func__, ucblocks); | 
 |  | 
 | 	p->block_error.stat[0].scale = FE_SCALE_COUNTER; | 
 | 	p->block_error.stat[0].uvalue = ucblocks; | 
 | } | 
 |  | 
 | static int cxd2841er_dvbt2_set_profile( | 
 | 	struct cxd2841er_priv *priv, enum cxd2841er_dvbt2_profile_t profile) | 
 | { | 
 | 	u8 tune_mode; | 
 | 	u8 seq_not2d_time; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	switch (profile) { | 
 | 	case DVBT2_PROFILE_BASE: | 
 | 		tune_mode = 0x01; | 
 | 		/* Set early unlock time */ | 
 | 		seq_not2d_time = (priv->xtal == SONY_XTAL_24000)?0x0E:0x0C; | 
 | 		break; | 
 | 	case DVBT2_PROFILE_LITE: | 
 | 		tune_mode = 0x05; | 
 | 		/* Set early unlock time */ | 
 | 		seq_not2d_time = (priv->xtal == SONY_XTAL_24000)?0x2E:0x28; | 
 | 		break; | 
 | 	case DVBT2_PROFILE_ANY: | 
 | 		tune_mode = 0x00; | 
 | 		/* Set early unlock time */ | 
 | 		seq_not2d_time = (priv->xtal == SONY_XTAL_24000)?0x2E:0x28; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x2E */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2e); | 
 | 	/* Set profile and tune mode */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x10, tune_mode, 0x07); | 
 | 	/* Set SLV-T Bank : 0x2B */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2b); | 
 | 	/* Set early unlock detection time */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x9d, seq_not2d_time); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_dvbt2_set_plp_config(struct cxd2841er_priv *priv, | 
 | 					  u8 is_auto, u8 plp_id) | 
 | { | 
 | 	if (is_auto) { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s() using auto PLP selection\n", __func__); | 
 | 	} else { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s() using manual PLP selection, ID %d\n", | 
 | 			__func__, plp_id); | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x23 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x23); | 
 | 	if (!is_auto) { | 
 | 		/* Manual PLP selection mode. Set the data PLP Id. */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xaf, plp_id); | 
 | 	} | 
 | 	/* Auto PLP select (Scanning mode = 0x00). Data PLP select = 0x01. */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xad, (is_auto ? 0x00 : 0x01)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_t2_band(struct cxd2841er_priv *priv, | 
 | 						u32 bandwidth) | 
 | { | 
 | 	u32 iffreq, ifhz; | 
 | 	u8 data[MAX_WRITE_REGSIZE]; | 
 |  | 
 | 	static const uint8_t nominalRate8bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x11, 0xF0, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */ | 
 | 		{0x15, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x11, 0xF0, 0x00, 0x00, 0x00}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t nominalRate7bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x14, 0x80, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */ | 
 | 		{0x18, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x14, 0x80, 0x00, 0x00, 0x00}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t nominalRate6bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x17, 0xEA, 0xAA, 0xAA, 0xAA}, /* 20.5MHz XTal */ | 
 | 		{0x1C, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x17, 0xEA, 0xAA, 0xAA, 0xAA}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t nominalRate5bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x1C, 0xB3, 0x33, 0x33, 0x33}, /* 20.5MHz XTal */ | 
 | 		{0x21, 0x99, 0x99, 0x99, 0x99}, /* 24MHz XTal */ | 
 | 		{0x1C, 0xB3, 0x33, 0x33, 0x33}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t nominalRate17bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x58, 0xE2, 0xAF, 0xE0, 0xBC}, /* 20.5MHz XTal */ | 
 | 		{0x68, 0x0F, 0xA2, 0x32, 0xD0}, /* 24MHz XTal */ | 
 | 		{0x58, 0xE2, 0xAF, 0xE0, 0xBC}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t itbCoef8bw[3][14] = { | 
 | 		{0x26, 0xAF, 0x06, 0xCD, 0x13, 0xBB, 0x28, 0xBA, | 
 | 			0x23, 0xA9, 0x1F, 0xA8, 0x2C, 0xC8}, /* 20.5MHz XTal */ | 
 | 		{0x2F, 0xBA, 0x28, 0x9B, 0x28, 0x9D, 0x28, 0xA1, | 
 | 			0x29, 0xA5, 0x2A, 0xAC, 0x29, 0xB5}, /* 24MHz XTal   */ | 
 | 		{0x26, 0xAF, 0x06, 0xCD, 0x13, 0xBB, 0x28, 0xBA, | 
 | 			0x23, 0xA9, 0x1F, 0xA8, 0x2C, 0xC8}  /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t itbCoef7bw[3][14] = { | 
 | 		{0x2C, 0xBD, 0x02, 0xCF, 0x04, 0xF8, 0x23, 0xA6, | 
 | 			0x29, 0xB0, 0x26, 0xA9, 0x21, 0xA5}, /* 20.5MHz XTal */ | 
 | 		{0x30, 0xB1, 0x29, 0x9A, 0x28, 0x9C, 0x28, 0xA0, | 
 | 			0x29, 0xA2, 0x2B, 0xA6, 0x2B, 0xAD}, /* 24MHz XTal   */ | 
 | 		{0x2C, 0xBD, 0x02, 0xCF, 0x04, 0xF8, 0x23, 0xA6, | 
 | 			0x29, 0xB0, 0x26, 0xA9, 0x21, 0xA5}  /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t itbCoef6bw[3][14] = { | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, | 
 | 			0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4}, /* 20.5MHz XTal */ | 
 | 		{0x31, 0xA8, 0x29, 0x9B, 0x27, 0x9C, 0x28, 0x9E, | 
 | 			0x29, 0xA4, 0x29, 0xA2, 0x29, 0xA8}, /* 24MHz XTal   */ | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, | 
 | 			0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4}  /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t itbCoef5bw[3][14] = { | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, | 
 | 			0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4}, /* 20.5MHz XTal */ | 
 | 		{0x31, 0xA8, 0x29, 0x9B, 0x27, 0x9C, 0x28, 0x9E, | 
 | 			0x29, 0xA4, 0x29, 0xA2, 0x29, 0xA8}, /* 24MHz XTal   */ | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, | 
 | 			0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4}  /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	static const uint8_t itbCoef17bw[3][14] = { | 
 | 		{0x25, 0xA0, 0x36, 0x8D, 0x2E, 0x94, 0x28, 0x9B, | 
 | 			0x32, 0x90, 0x2C, 0x9D, 0x29, 0x99}, /* 20.5MHz XTal */ | 
 | 		{0x33, 0x8E, 0x2B, 0x97, 0x2D, 0x95, 0x37, 0x8B, | 
 | 			0x30, 0x97, 0x2D, 0x9A, 0x21, 0xA4}, /* 24MHz XTal   */ | 
 | 		{0x25, 0xA0, 0x36, 0x8D, 0x2E, 0x94, 0x28, 0x9B, | 
 | 			0x32, 0x90, 0x2C, 0x9D, 0x29, 0x99}  /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	/* Set SLV-T Bank : 0x20 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20); | 
 |  | 
 | 	switch (bandwidth) { | 
 | 	case 8000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate8bw[priv->xtal], 5); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x27 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, | 
 | 				0x7a, 0x00, 0x0f); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x10 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 |  | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		 */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef8bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 4800000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 				priv, I2C_SLVT, 0xD7, 0x00, 0x07); | 
 | 		break; | 
 | 	case 7000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate7bw[priv->xtal], 5); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x27 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, | 
 | 				0x7a, 0x00, 0x0f); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x10 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 |  | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		 */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef7bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 4200000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 				priv, I2C_SLVT, 0xD7, 0x02, 0x07); | 
 | 		break; | 
 | 	case 6000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate6bw[priv->xtal], 5); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x27 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, | 
 | 				0x7a, 0x00, 0x0f); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x10 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 |  | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		 */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef6bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 3600000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 				priv, I2C_SLVT, 0xD7, 0x04, 0x07); | 
 | 		break; | 
 | 	case 5000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate5bw[priv->xtal], 5); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x27 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, | 
 | 				0x7a, 0x00, 0x0f); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x10 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 |  | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		 */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef5bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 3600000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 				priv, I2C_SLVT, 0xD7, 0x06, 0x07); | 
 | 		break; | 
 | 	case 1712000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate17bw[priv->xtal], 5); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x27 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, | 
 | 				0x7a, 0x03, 0x0f); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x10 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 |  | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		 */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef17bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 3500000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 				priv, I2C_SLVT, 0xD7, 0x03, 0x07); | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_t_band( | 
 | 		struct cxd2841er_priv *priv, u32 bandwidth) | 
 | { | 
 | 	u8 data[MAX_WRITE_REGSIZE]; | 
 | 	u32 iffreq, ifhz; | 
 | 	static const u8 nominalRate8bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x11, 0xF0, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */ | 
 | 		{0x15, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x11, 0xF0, 0x00, 0x00, 0x00}  /* 41MHz XTal */ | 
 | 	}; | 
 | 	static const u8 nominalRate7bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x14, 0x80, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */ | 
 | 		{0x18, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x14, 0x80, 0x00, 0x00, 0x00}  /* 41MHz XTal */ | 
 | 	}; | 
 | 	static const u8 nominalRate6bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x17, 0xEA, 0xAA, 0xAA, 0xAA}, /* 20.5MHz XTal */ | 
 | 		{0x1C, 0x00, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x17, 0xEA, 0xAA, 0xAA, 0xAA}  /* 41MHz XTal */ | 
 | 	}; | 
 | 	static const u8 nominalRate5bw[3][5] = { | 
 | 		/* TRCG Nominal Rate [37:0] */ | 
 | 		{0x1C, 0xB3, 0x33, 0x33, 0x33}, /* 20.5MHz XTal */ | 
 | 		{0x21, 0x99, 0x99, 0x99, 0x99}, /* 24MHz XTal */ | 
 | 		{0x1C, 0xB3, 0x33, 0x33, 0x33}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const u8 itbCoef8bw[3][14] = { | 
 | 		{0x26, 0xAF, 0x06, 0xCD, 0x13, 0xBB, 0x28, 0xBA, 0x23, 0xA9, | 
 | 			0x1F, 0xA8, 0x2C, 0xC8}, /* 20.5MHz XTal */ | 
 | 		{0x2F, 0xBA, 0x28, 0x9B, 0x28, 0x9D, 0x28, 0xA1, 0x29, 0xA5, | 
 | 			0x2A, 0xAC, 0x29, 0xB5}, /* 24MHz XTal   */ | 
 | 		{0x26, 0xAF, 0x06, 0xCD, 0x13, 0xBB, 0x28, 0xBA, 0x23, 0xA9, | 
 | 			0x1F, 0xA8, 0x2C, 0xC8}  /* 41MHz XTal   */ | 
 | 	}; | 
 | 	static const u8 itbCoef7bw[3][14] = { | 
 | 		{0x2C, 0xBD, 0x02, 0xCF, 0x04, 0xF8, 0x23, 0xA6, 0x29, 0xB0, | 
 | 			0x26, 0xA9, 0x21, 0xA5}, /* 20.5MHz XTal */ | 
 | 		{0x30, 0xB1, 0x29, 0x9A, 0x28, 0x9C, 0x28, 0xA0, 0x29, 0xA2, | 
 | 			0x2B, 0xA6, 0x2B, 0xAD}, /* 24MHz XTal   */ | 
 | 		{0x2C, 0xBD, 0x02, 0xCF, 0x04, 0xF8, 0x23, 0xA6, 0x29, 0xB0, | 
 | 			0x26, 0xA9, 0x21, 0xA5}  /* 41MHz XTal   */ | 
 | 	}; | 
 | 	static const u8 itbCoef6bw[3][14] = { | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, 0x00, 0xCF, | 
 | 			0x00, 0xE6, 0x23, 0xA4}, /* 20.5MHz XTal */ | 
 | 		{0x31, 0xA8, 0x29, 0x9B, 0x27, 0x9C, 0x28, 0x9E, 0x29, 0xA4, | 
 | 			0x29, 0xA2, 0x29, 0xA8}, /* 24MHz XTal   */ | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, 0x00, 0xCF, | 
 | 			0x00, 0xE6, 0x23, 0xA4}  /* 41MHz XTal   */ | 
 | 	}; | 
 | 	static const u8 itbCoef5bw[3][14] = { | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, 0x00, 0xCF, | 
 | 			0x00, 0xE6, 0x23, 0xA4}, /* 20.5MHz XTal */ | 
 | 		{0x31, 0xA8, 0x29, 0x9B, 0x27, 0x9C, 0x28, 0x9E, 0x29, 0xA4, | 
 | 			0x29, 0xA2, 0x29, 0xA8}, /* 24MHz XTal   */ | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, 0x00, 0xCF, | 
 | 			0x00, 0xE6, 0x23, 0xA4}  /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	/* Set SLV-T Bank : 0x13 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x13); | 
 | 	/* Echo performance optimization setting */ | 
 | 	data[0] = 0x01; | 
 | 	data[1] = 0x14; | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x9C, data, 2); | 
 |  | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 |  | 
 | 	switch (bandwidth) { | 
 | 	case 8000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate8bw[priv->xtal], 5); | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		*/ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef8bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 4800000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0xD7, 0x00, 0x07); | 
 |  | 
 | 		/* Demod core latency setting */ | 
 | 		if (priv->xtal == SONY_XTAL_24000) { | 
 | 			data[0] = 0x15; | 
 | 			data[1] = 0x28; | 
 | 		} else { | 
 | 			data[0] = 0x01; | 
 | 			data[1] = 0xE0; | 
 | 		} | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Notch filter setting */ | 
 | 		data[0] = 0x01; | 
 | 		data[1] = 0x02; | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x17); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x38, data, 2); | 
 | 		break; | 
 | 	case 7000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate7bw[priv->xtal], 5); | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		*/ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef7bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 4200000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0xD7, 0x02, 0x07); | 
 |  | 
 | 		/* Demod core latency setting */ | 
 | 		if (priv->xtal == SONY_XTAL_24000) { | 
 | 			data[0] = 0x1F; | 
 | 			data[1] = 0xF8; | 
 | 		} else { | 
 | 			data[0] = 0x12; | 
 | 			data[1] = 0xF8; | 
 | 		} | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Notch filter setting */ | 
 | 		data[0] = 0x00; | 
 | 		data[1] = 0x03; | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x17); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x38, data, 2); | 
 | 		break; | 
 | 	case 6000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate6bw[priv->xtal], 5); | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		*/ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef6bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 3600000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0xD7, 0x04, 0x07); | 
 |  | 
 | 		/* Demod core latency setting */ | 
 | 		if (priv->xtal == SONY_XTAL_24000) { | 
 | 			data[0] = 0x25; | 
 | 			data[1] = 0x4C; | 
 | 		} else { | 
 | 			data[0] = 0x1F; | 
 | 			data[1] = 0xDC; | 
 | 		} | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Notch filter setting */ | 
 | 		data[0] = 0x00; | 
 | 		data[1] = 0x03; | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x17); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x38, data, 2); | 
 | 		break; | 
 | 	case 5000000: | 
 | 		/* <Timing Recovery setting> */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate5bw[priv->xtal], 5); | 
 | 		/* Group delay equaliser settings for | 
 | 		 * ASCOT2D, ASCOT2E and ASCOT3 tuners | 
 | 		*/ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef5bw[priv->xtal], 14); | 
 | 		/* <IF freq setting> */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 3600000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0xD7, 0x06, 0x07); | 
 |  | 
 | 		/* Demod core latency setting */ | 
 | 		if (priv->xtal == SONY_XTAL_24000) { | 
 | 			data[0] = 0x2C; | 
 | 			data[1] = 0xC2; | 
 | 		} else { | 
 | 			data[0] = 0x26; | 
 | 			data[1] = 0x3C; | 
 | 		} | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Notch filter setting */ | 
 | 		data[0] = 0x00; | 
 | 		data[1] = 0x03; | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x17); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x38, data, 2); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_i_band( | 
 | 		struct cxd2841er_priv *priv, u32 bandwidth) | 
 | { | 
 | 	u32 iffreq, ifhz; | 
 | 	u8 data[3]; | 
 |  | 
 | 	/* TRCG Nominal Rate */ | 
 | 	static const u8 nominalRate8bw[3][5] = { | 
 | 		{0x00, 0x00, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */ | 
 | 		{0x11, 0xB8, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x00, 0x00, 0x00, 0x00, 0x00}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const u8 nominalRate7bw[3][5] = { | 
 | 		{0x00, 0x00, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */ | 
 | 		{0x14, 0x40, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x00, 0x00, 0x00, 0x00, 0x00}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const u8 nominalRate6bw[3][5] = { | 
 | 		{0x14, 0x2E, 0x00, 0x00, 0x00}, /* 20.5MHz XTal */ | 
 | 		{0x17, 0xA0, 0x00, 0x00, 0x00}, /* 24MHz XTal */ | 
 | 		{0x14, 0x2E, 0x00, 0x00, 0x00}  /* 41MHz XTal */ | 
 | 	}; | 
 |  | 
 | 	static const u8 itbCoef8bw[3][14] = { | 
 | 		{0x00}, /* 20.5MHz XTal */ | 
 | 		{0x2F, 0xBA, 0x28, 0x9B, 0x28, 0x9D, 0x28, 0xA1, 0x29, | 
 | 			0xA5, 0x2A, 0xAC, 0x29, 0xB5}, /* 24MHz Xtal */ | 
 | 		{0x0}, /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	static const u8 itbCoef7bw[3][14] = { | 
 | 		{0x00}, /* 20.5MHz XTal */ | 
 | 		{0x30, 0xB1, 0x29, 0x9A, 0x28, 0x9C, 0x28, 0xA0, 0x29, | 
 | 			0xA2, 0x2B, 0xA6, 0x2B, 0xAD}, /* 24MHz Xtal */ | 
 | 		{0x00}, /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	static const u8 itbCoef6bw[3][14] = { | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, 0x00, | 
 | 			0xCF, 0x00, 0xE6, 0x23, 0xA4}, /* 20.5MHz XTal */ | 
 | 		{0x31, 0xA8, 0x29, 0x9B, 0x27, 0x9C, 0x28, 0x9E, 0x29, | 
 | 			0xA4, 0x29, 0xA2, 0x29, 0xA8}, /* 24MHz Xtal   */ | 
 | 		{0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, 0x00, | 
 | 			0xCF, 0x00, 0xE6, 0x23, 0xA4}, /* 41MHz XTal   */ | 
 | 	}; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s() bandwidth=%u\n", __func__, bandwidth); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 |  | 
 | 	/*  20.5/41MHz Xtal support is not available | 
 | 	 *  on ISDB-T 7MHzBW and 8MHzBW | 
 | 	*/ | 
 | 	if (priv->xtal != SONY_XTAL_24000 && bandwidth > 6000000) { | 
 | 		dev_err(&priv->i2c->dev, | 
 | 			"%s(): bandwidth %d supported only for 24MHz xtal\n", | 
 | 			__func__, bandwidth); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (bandwidth) { | 
 | 	case 8000000: | 
 | 		/* TRCG Nominal Rate */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate8bw[priv->xtal], 5); | 
 | 		/*  Group delay equaliser settings for ASCOT tuners optimized */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef8bw[priv->xtal], 14); | 
 |  | 
 | 		/* IF freq setting */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 4750000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 |  | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd7, 0x0, 0x7); | 
 |  | 
 | 		/* Demod core latency setting */ | 
 | 		data[0] = 0x13; | 
 | 		data[1] = 0xFC; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Acquisition optimization setting */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x12); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x71, 0x03, 0x07); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x15); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xBE, 0x03); | 
 | 		break; | 
 | 	case 7000000: | 
 | 		/* TRCG Nominal Rate */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate7bw[priv->xtal], 5); | 
 | 		/*  Group delay equaliser settings for ASCOT tuners optimized */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef7bw[priv->xtal], 14); | 
 |  | 
 | 		/* IF freq setting */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 4150000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 |  | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd7, 0x02, 0x7); | 
 |  | 
 | 		/* Demod core latency setting */ | 
 | 		data[0] = 0x1A; | 
 | 		data[1] = 0xFA; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Acquisition optimization setting */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x12); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x71, 0x03, 0x07); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x15); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xBE, 0x02); | 
 | 		break; | 
 | 	case 6000000: | 
 | 		/* TRCG Nominal Rate */ | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0x9F, nominalRate6bw[priv->xtal], 5); | 
 | 		/*  Group delay equaliser settings for ASCOT tuners optimized */ | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs(priv, I2C_SLVT, | 
 | 				0xA6, itbCoef6bw[priv->xtal], 14); | 
 |  | 
 | 		/* IF freq setting */ | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 3550000); | 
 | 		iffreq = cxd2841er_calc_iffreq_xtal(priv->xtal, ifhz); | 
 | 		data[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 		data[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 		data[2] = (u8)(iffreq & 0xff); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xB6, data, 3); | 
 |  | 
 | 		/* System bandwidth setting */ | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd7, 0x04, 0x7); | 
 |  | 
 | 		/* Demod core latency setting */ | 
 | 		if (priv->xtal == SONY_XTAL_24000) { | 
 | 			data[0] = 0x1F; | 
 | 			data[1] = 0x79; | 
 | 		} else { | 
 | 			data[0] = 0x1A; | 
 | 			data[1] = 0xE2; | 
 | 		} | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Acquisition optimization setting */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x12); | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x71, 0x07, 0x07); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x15); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xBE, 0x02); | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid bandwidth %d\n", | 
 | 				__func__, bandwidth); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_c_band(struct cxd2841er_priv *priv, | 
 | 					       u32 bandwidth) | 
 | { | 
 | 	u8 bw7_8mhz_b10_a6[] = { | 
 | 		0x2D, 0xC7, 0x04, 0xF4, 0x07, 0xC5, 0x2A, 0xB8, | 
 | 		0x27, 0x9E, 0x27, 0xA4, 0x29, 0xAB }; | 
 | 	u8 bw6mhz_b10_a6[] = { | 
 | 		0x27, 0xA7, 0x28, 0xB3, 0x02, 0xF0, 0x01, 0xE8, | 
 | 		0x00, 0xCF, 0x00, 0xE6, 0x23, 0xA4 }; | 
 | 	u8 b10_b6[3]; | 
 | 	u32 iffreq, ifhz; | 
 |  | 
 | 	if (bandwidth != 6000000 && | 
 | 			bandwidth != 7000000 && | 
 | 			bandwidth != 8000000) { | 
 | 		dev_info(&priv->i2c->dev, "%s(): unsupported bandwidth %d. Forcing 8Mhz!\n", | 
 | 				__func__, bandwidth); | 
 | 		bandwidth = 8000000; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s() bw=%d\n", __func__, bandwidth); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	switch (bandwidth) { | 
 | 	case 8000000: | 
 | 	case 7000000: | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs( | 
 | 				priv, I2C_SLVT, 0xa6, | 
 | 				bw7_8mhz_b10_a6, sizeof(bw7_8mhz_b10_a6)); | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 4900000); | 
 | 		iffreq = cxd2841er_calc_iffreq(ifhz); | 
 | 		break; | 
 | 	case 6000000: | 
 | 		if (priv->flags & CXD2841ER_ASCOT) | 
 | 			cxd2841er_write_regs( | 
 | 				priv, I2C_SLVT, 0xa6, | 
 | 				bw6mhz_b10_a6, sizeof(bw6mhz_b10_a6)); | 
 | 		ifhz = cxd2841er_get_if_hz(priv, 3700000); | 
 | 		iffreq = cxd2841er_calc_iffreq(ifhz); | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(&priv->i2c->dev, "%s(): unsupported bandwidth %d\n", | 
 | 			__func__, bandwidth); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	/* <IF freq setting> */ | 
 | 	b10_b6[0] = (u8) ((iffreq >> 16) & 0xff); | 
 | 	b10_b6[1] = (u8)((iffreq >> 8) & 0xff); | 
 | 	b10_b6[2] = (u8)(iffreq & 0xff); | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0xb6, b10_b6, sizeof(b10_b6)); | 
 | 	/* Set SLV-T Bank : 0x11 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x11); | 
 | 	switch (bandwidth) { | 
 | 	case 8000000: | 
 | 	case 7000000: | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0xa3, 0x00, 0x1f); | 
 | 		break; | 
 | 	case 6000000: | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0xa3, 0x14, 0x1f); | 
 | 		break; | 
 | 	} | 
 | 	/* Set SLV-T Bank : 0x40 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 	switch (bandwidth) { | 
 | 	case 8000000: | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0x26, 0x0b, 0x0f); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT,  0x27, 0x3e); | 
 | 		break; | 
 | 	case 7000000: | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0x26, 0x09, 0x0f); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT,  0x27, 0xd6); | 
 | 		break; | 
 | 	case 6000000: | 
 | 		cxd2841er_set_reg_bits( | 
 | 			priv, I2C_SLVT, 0x26, 0x08, 0x0f); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT,  0x27, 0x6e); | 
 | 		break; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_t(struct cxd2841er_priv *priv, | 
 | 					  u32 bandwidth) | 
 | { | 
 | 	u8 data[2] = { 0x09, 0x54 }; | 
 | 	u8 data24m[3] = {0xDC, 0x6C, 0x00}; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	cxd2841er_set_ts_clock_mode(priv, SYS_DVBT); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Set demod mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, 0x01); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Enable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x01); | 
 | 	/* Disable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00); | 
 | 	/* Enable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Enable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x1a); | 
 | 	/* Enable ADC 2 & 3 */ | 
 | 	if (priv->xtal == SONY_XTAL_41000) { | 
 | 		data[0] = 0x0A; | 
 | 		data[1] = 0xD4; | 
 | 	} | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x43, data, 2); | 
 | 	/* Enable ADC 4 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x00); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	/* IFAGC gain settings */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd2, 0x0c, 0x1f); | 
 | 	/* Set SLV-T Bank : 0x11 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x11); | 
 | 	/* BBAGC TARGET level setting */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x6a, 0x50); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	/* ASCOT setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xa5, | 
 | 		((priv->flags & CXD2841ER_ASCOT) ? 0x01 : 0x00), 0x01); | 
 | 	/* Set SLV-T Bank : 0x18 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x18); | 
 | 	/* Pre-RS BER monitor setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x36, 0x40, 0x07); | 
 | 	/* FEC Auto Recovery setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x30, 0x01, 0x01); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x31, 0x01, 0x01); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* TSIF setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xce, 0x01, 0x01); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xcf, 0x01, 0x01); | 
 |  | 
 | 	if (priv->xtal == SONY_XTAL_24000) { | 
 | 		/* Set SLV-T Bank : 0x10 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xBF, 0x60); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x18); | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x24, data24m, 3); | 
 | 	} | 
 |  | 
 | 	cxd2841er_sleep_tc_to_active_t_band(priv, bandwidth); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable HiZ Setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x28); | 
 | 	/* Disable HiZ Setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0x00); | 
 | 	priv->state = STATE_ACTIVE_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_t2(struct cxd2841er_priv *priv, | 
 | 					   u32 bandwidth) | 
 | { | 
 | 	u8 data[MAX_WRITE_REGSIZE]; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	cxd2841er_set_ts_clock_mode(priv, SYS_DVBT2); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Set demod mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, 0x02); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Enable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x01); | 
 | 	/* Disable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x59, 0x00); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00); | 
 | 	/* Enable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Enable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x1a); | 
 |  | 
 | 	if (priv->xtal == SONY_XTAL_41000) { | 
 | 		data[0] = 0x0A; | 
 | 		data[1] = 0xD4; | 
 | 	} else { | 
 | 		data[0] = 0x09; | 
 | 		data[1] = 0x54; | 
 | 	} | 
 |  | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x43, data, 2); | 
 | 	/* Enable ADC 4 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x00); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	/* IFAGC gain settings */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd2, 0x0c, 0x1f); | 
 | 	/* Set SLV-T Bank : 0x11 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x11); | 
 | 	/* BBAGC TARGET level setting */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x6a, 0x50); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	/* ASCOT setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xa5, | 
 | 		((priv->flags & CXD2841ER_ASCOT) ? 0x01 : 0x00), 0x01); | 
 | 	/* Set SLV-T Bank : 0x20 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20); | 
 | 	/* Acquisition optimization setting */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x8b, 0x3c); | 
 | 	/* Set SLV-T Bank : 0x2b */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2b); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x76, 0x20, 0x70); | 
 | 	/* Set SLV-T Bank : 0x23 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x23); | 
 | 	/* L1 Control setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xE6, 0x00, 0x03); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* TSIF setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xce, 0x01, 0x01); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xcf, 0x01, 0x01); | 
 | 	/* DVB-T2 initial setting */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x13); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x83, 0x10); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x86, 0x34); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x9e, 0x09, 0x0f); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x9f, 0xd8); | 
 | 	/* Set SLV-T Bank : 0x2a */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2a); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x38, 0x04, 0x0f); | 
 | 	/* Set SLV-T Bank : 0x2b */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2b); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x11, 0x20, 0x3f); | 
 |  | 
 | 	/* 24MHz Xtal setting */ | 
 | 	if (priv->xtal == SONY_XTAL_24000) { | 
 | 		/* Set SLV-T Bank : 0x11 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x11); | 
 | 		data[0] = 0xEB; | 
 | 		data[1] = 0x03; | 
 | 		data[2] = 0x3B; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x33, data, 3); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x20 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x20); | 
 | 		data[0] = 0x5E; | 
 | 		data[1] = 0x5E; | 
 | 		data[2] = 0x47; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x95, data, 3); | 
 |  | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x99, 0x18); | 
 |  | 
 | 		data[0] = 0x3F; | 
 | 		data[1] = 0xFF; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD9, data, 2); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x24 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x24); | 
 | 		data[0] = 0x0B; | 
 | 		data[1] = 0x72; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x34, data, 2); | 
 |  | 
 | 		data[0] = 0x93; | 
 | 		data[1] = 0xF3; | 
 | 		data[2] = 0x00; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xD2, data, 3); | 
 |  | 
 | 		data[0] = 0x05; | 
 | 		data[1] = 0xB8; | 
 | 		data[2] = 0xD8; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0xDD, data, 3); | 
 |  | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xE0, 0x00); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x25 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x25); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xED, 0x60); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x27 */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x27); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0xFA, 0x34); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x2B */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2B); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x4B, 0x2F); | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x9E, 0x0E); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x2D */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x2D); | 
 | 		data[0] = 0x89; | 
 | 		data[1] = 0x89; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x24, data, 2); | 
 |  | 
 | 		/* Set SLV-T Bank : 0x5E */ | 
 | 		cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x5E); | 
 | 		data[0] = 0x24; | 
 | 		data[1] = 0x95; | 
 | 		cxd2841er_write_regs(priv, I2C_SLVT, 0x8C, data, 2); | 
 | 	} | 
 |  | 
 | 	cxd2841er_sleep_tc_to_active_t2_band(priv, bandwidth); | 
 |  | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable HiZ Setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x28); | 
 | 	/* Disable HiZ Setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0x00); | 
 | 	priv->state = STATE_ACTIVE_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ISDB-Tb part */ | 
 | static int cxd2841er_sleep_tc_to_active_i(struct cxd2841er_priv *priv, | 
 | 		u32 bandwidth) | 
 | { | 
 | 	u8 data[2] = { 0x09, 0x54 }; | 
 | 	u8 data24m[2] = {0x60, 0x00}; | 
 | 	u8 data24m2[3] = {0xB7, 0x1B, 0x00}; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	cxd2841er_set_ts_clock_mode(priv, SYS_DVBT); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Set demod mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, 0x06); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Enable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x01); | 
 | 	/* Enable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x01); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x59, 0x01); | 
 | 	/* Enable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Enable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x1a); | 
 | 	/* xtal freq 20.5MHz or 24M */ | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x43, data, 2); | 
 | 	/* Enable ADC 4 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x00); | 
 | 	/* ASCOT setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xa5, | 
 | 		((priv->flags & CXD2841ER_ASCOT) ? 0x01 : 0x00), 0x01); | 
 | 	/* FEC Auto Recovery setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x30, 0x01, 0x01); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x31, 0x00, 0x01); | 
 | 	/* ISDB-T initial setting */ | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xce, 0x00, 0x01); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xcf, 0x00, 0x01); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x69, 0x04, 0x07); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x6B, 0x03, 0x07); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x9D, 0x50, 0xFF); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xD3, 0x06, 0x1F); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xED, 0x00, 0x01); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xE2, 0xCE, 0x80); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xF2, 0x13, 0x10); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xDE, 0x2E, 0x3F); | 
 | 	/* Set SLV-T Bank : 0x15 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x15); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xDE, 0x02, 0x03); | 
 | 	/* Set SLV-T Bank : 0x1E */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x1E); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x73, 0x68, 0xFF); | 
 | 	/* Set SLV-T Bank : 0x63 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x63); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0x81, 0x00, 0x01); | 
 |  | 
 | 	/* for xtal 24MHz */ | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0xBF, data24m, 2); | 
 | 	/* Set SLV-T Bank : 0x60 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x60); | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0xA8, data24m2, 3); | 
 |  | 
 | 	cxd2841er_sleep_tc_to_active_i_band(priv, bandwidth); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable HiZ Setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x28); | 
 | 	/* Disable HiZ Setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0x00); | 
 | 	priv->state = STATE_ACTIVE_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc_to_active_c(struct cxd2841er_priv *priv, | 
 | 					  u32 bandwidth) | 
 | { | 
 | 	u8 data[2] = { 0x09, 0x54 }; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	cxd2841er_set_ts_clock_mode(priv, SYS_DVBC_ANNEX_A); | 
 | 	/* Set SLV-X Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x00, 0x00); | 
 | 	/* Set demod mode */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x17, 0x04); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Enable demod clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2c, 0x01); | 
 | 	/* Disable RF level monitor */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x59, 0x00); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x2f, 0x00); | 
 | 	/* Enable ADC clock */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x30, 0x00); | 
 | 	/* Enable ADC 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x41, 0x1a); | 
 | 	/* xtal freq 20.5MHz */ | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x43, data, 2); | 
 | 	/* Enable ADC 4 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVX, 0x18, 0x00); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	/* IFAGC gain settings */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xd2, 0x09, 0x1f); | 
 | 	/* Set SLV-T Bank : 0x11 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x11); | 
 | 	/* BBAGC TARGET level setting */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x6a, 0x48); | 
 | 	/* Set SLV-T Bank : 0x10 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	/* ASCOT setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xa5, | 
 | 		((priv->flags & CXD2841ER_ASCOT) ? 0x01 : 0x00), 0x01); | 
 | 	/* Set SLV-T Bank : 0x40 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x40); | 
 | 	/* Demod setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xc3, 0x00, 0x04); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* TSIF setting */ | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xce, 0x01, 0x01); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xcf, 0x01, 0x01); | 
 |  | 
 | 	cxd2841er_sleep_tc_to_active_c_band(priv, bandwidth); | 
 | 	/* Set SLV-T Bank : 0x00 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	/* Disable HiZ Setting 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x80, 0x28); | 
 | 	/* Disable HiZ Setting 2 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x81, 0x00); | 
 | 	priv->state = STATE_ACTIVE_TC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_get_frontend(struct dvb_frontend *fe, | 
 | 				  struct dtv_frontend_properties *p) | 
 | { | 
 | 	enum fe_status status = 0; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	if (priv->state == STATE_ACTIVE_S) | 
 | 		cxd2841er_read_status_s(fe, &status); | 
 | 	else if (priv->state == STATE_ACTIVE_TC) | 
 | 		cxd2841er_read_status_tc(fe, &status); | 
 |  | 
 | 	if (priv->state == STATE_ACTIVE_TC || priv->state == STATE_ACTIVE_S) | 
 | 		cxd2841er_read_signal_strength(fe); | 
 | 	else | 
 | 		p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 |  | 
 | 	if (status & FE_HAS_LOCK) { | 
 | 		if (priv->stats_time && | 
 | 		    (!time_after(jiffies, priv->stats_time))) | 
 | 			return 0; | 
 |  | 
 | 		/* Prevent retrieving stats faster than once per second */ | 
 | 		priv->stats_time = jiffies + msecs_to_jiffies(1000); | 
 |  | 
 | 		cxd2841er_read_snr(fe); | 
 | 		cxd2841er_read_ucblocks(fe); | 
 | 		cxd2841er_read_ber(fe); | 
 | 	} else { | 
 | 		p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 		p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_set_frontend_s(struct dvb_frontend *fe) | 
 | { | 
 | 	int ret = 0, i, timeout, carr_offset; | 
 | 	enum fe_status status; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 | 	u32 symbol_rate = p->symbol_rate/1000; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): %s frequency=%d symbol_rate=%d xtal=%d\n", | 
 | 		__func__, | 
 | 		(p->delivery_system == SYS_DVBS ? "DVB-S" : "DVB-S2"), | 
 | 		 p->frequency, symbol_rate, priv->xtal); | 
 |  | 
 | 	if (priv->flags & CXD2841ER_EARLY_TUNE) | 
 | 		cxd2841er_tuner_set(fe); | 
 |  | 
 | 	switch (priv->state) { | 
 | 	case STATE_SLEEP_S: | 
 | 		ret = cxd2841er_sleep_s_to_active_s( | 
 | 			priv, p->delivery_system, symbol_rate); | 
 | 		break; | 
 | 	case STATE_ACTIVE_S: | 
 | 		ret = cxd2841er_retune_active(priv, p); | 
 | 		break; | 
 | 	default: | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		ret = -EINVAL; | 
 | 		goto done; | 
 | 	} | 
 | 	if (ret) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): tune failed\n", __func__); | 
 | 		goto done; | 
 | 	} | 
 |  | 
 | 	if (!(priv->flags & CXD2841ER_EARLY_TUNE)) | 
 | 		cxd2841er_tuner_set(fe); | 
 |  | 
 | 	cxd2841er_tune_done(priv); | 
 | 	timeout = DIV_ROUND_UP(3000000, symbol_rate) + 150; | 
 |  | 
 | 	i = 0; | 
 | 	do { | 
 | 		usleep_range(CXD2841ER_DVBS_POLLING_INVL*1000, | 
 | 			(CXD2841ER_DVBS_POLLING_INVL + 2) * 1000); | 
 | 		cxd2841er_read_status_s(fe, &status); | 
 | 		if (status & FE_HAS_LOCK) | 
 | 			break; | 
 | 		i++; | 
 | 	} while (i < timeout / CXD2841ER_DVBS_POLLING_INVL); | 
 |  | 
 | 	if (status & FE_HAS_LOCK) { | 
 | 		if (cxd2841er_get_carrier_offset_s_s2( | 
 | 				priv, &carr_offset)) { | 
 | 			ret = -EINVAL; | 
 | 			goto done; | 
 | 		} | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): carrier_offset=%d\n", | 
 | 			__func__, carr_offset); | 
 | 	} | 
 | done: | 
 | 	/* Reset stats */ | 
 | 	p->strength.stat[0].scale = FE_SCALE_RELATIVE; | 
 | 	p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 |  | 
 | 	/* Reset the wait for jiffies logic */ | 
 | 	priv->stats_time = 0; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int cxd2841er_set_frontend_tc(struct dvb_frontend *fe) | 
 | { | 
 | 	int ret = 0, timeout; | 
 | 	enum fe_status status; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s() delivery_system=%d bandwidth_hz=%d\n", | 
 | 		 __func__, p->delivery_system, p->bandwidth_hz); | 
 |  | 
 | 	if (priv->flags & CXD2841ER_EARLY_TUNE) | 
 | 		cxd2841er_tuner_set(fe); | 
 |  | 
 | 	/* deconfigure/put demod to sleep on delsys switch if active */ | 
 | 	if (priv->state == STATE_ACTIVE_TC && | 
 | 	    priv->system != p->delivery_system) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s(): old_delsys=%d, new_delsys=%d -> sleep\n", | 
 | 			 __func__, priv->system, p->delivery_system); | 
 | 		cxd2841er_sleep_tc(fe); | 
 | 	} | 
 |  | 
 | 	if (p->delivery_system == SYS_DVBT) { | 
 | 		priv->system = SYS_DVBT; | 
 | 		switch (priv->state) { | 
 | 		case STATE_SLEEP_TC: | 
 | 			ret = cxd2841er_sleep_tc_to_active_t( | 
 | 				priv, p->bandwidth_hz); | 
 | 			break; | 
 | 		case STATE_ACTIVE_TC: | 
 | 			ret = cxd2841er_retune_active(priv, p); | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 			ret = -EINVAL; | 
 | 		} | 
 | 	} else if (p->delivery_system == SYS_DVBT2) { | 
 | 		priv->system = SYS_DVBT2; | 
 | 		cxd2841er_dvbt2_set_plp_config(priv, | 
 | 			(int)(p->stream_id > 255), p->stream_id); | 
 | 		cxd2841er_dvbt2_set_profile(priv, DVBT2_PROFILE_BASE); | 
 | 		switch (priv->state) { | 
 | 		case STATE_SLEEP_TC: | 
 | 			ret = cxd2841er_sleep_tc_to_active_t2(priv, | 
 | 				p->bandwidth_hz); | 
 | 			break; | 
 | 		case STATE_ACTIVE_TC: | 
 | 			ret = cxd2841er_retune_active(priv, p); | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 			ret = -EINVAL; | 
 | 		} | 
 | 	} else if (p->delivery_system == SYS_ISDBT) { | 
 | 		priv->system = SYS_ISDBT; | 
 | 		switch (priv->state) { | 
 | 		case STATE_SLEEP_TC: | 
 | 			ret = cxd2841er_sleep_tc_to_active_i( | 
 | 					priv, p->bandwidth_hz); | 
 | 			break; | 
 | 		case STATE_ACTIVE_TC: | 
 | 			ret = cxd2841er_retune_active(priv, p); | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 					__func__, priv->state); | 
 | 			ret = -EINVAL; | 
 | 		} | 
 | 	} else if (p->delivery_system == SYS_DVBC_ANNEX_A || | 
 | 			p->delivery_system == SYS_DVBC_ANNEX_C) { | 
 | 		priv->system = SYS_DVBC_ANNEX_A; | 
 | 		/* correct bandwidth */ | 
 | 		if (p->bandwidth_hz != 6000000 && | 
 | 				p->bandwidth_hz != 7000000 && | 
 | 				p->bandwidth_hz != 8000000) { | 
 | 			p->bandwidth_hz = 8000000; | 
 | 			dev_dbg(&priv->i2c->dev, "%s(): forcing bandwidth to %d\n", | 
 | 					__func__, p->bandwidth_hz); | 
 | 		} | 
 |  | 
 | 		switch (priv->state) { | 
 | 		case STATE_SLEEP_TC: | 
 | 			ret = cxd2841er_sleep_tc_to_active_c( | 
 | 				priv, p->bandwidth_hz); | 
 | 			break; | 
 | 		case STATE_ACTIVE_TC: | 
 | 			ret = cxd2841er_retune_active(priv, p); | 
 | 			break; | 
 | 		default: | 
 | 			dev_dbg(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 				__func__, priv->state); | 
 | 			ret = -EINVAL; | 
 | 		} | 
 | 	} else { | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): invalid delivery system %d\n", | 
 | 			__func__, p->delivery_system); | 
 | 		ret = -EINVAL; | 
 | 	} | 
 | 	if (ret) | 
 | 		goto done; | 
 |  | 
 | 	if (!(priv->flags & CXD2841ER_EARLY_TUNE)) | 
 | 		cxd2841er_tuner_set(fe); | 
 |  | 
 | 	cxd2841er_tune_done(priv); | 
 |  | 
 | 	if (priv->flags & CXD2841ER_NO_WAIT_LOCK) | 
 | 		goto done; | 
 |  | 
 | 	timeout = 2500; | 
 | 	while (timeout > 0) { | 
 | 		ret = cxd2841er_read_status_tc(fe, &status); | 
 | 		if (ret) | 
 | 			goto done; | 
 | 		if (status & FE_HAS_LOCK) | 
 | 			break; | 
 | 		msleep(20); | 
 | 		timeout -= 20; | 
 | 	} | 
 | 	if (timeout < 0) | 
 | 		dev_dbg(&priv->i2c->dev, | 
 | 			"%s(): LOCK wait timeout\n", __func__); | 
 | done: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int cxd2841er_tune_s(struct dvb_frontend *fe, | 
 | 			    bool re_tune, | 
 | 			    unsigned int mode_flags, | 
 | 			    unsigned int *delay, | 
 | 			    enum fe_status *status) | 
 | { | 
 | 	int ret, carrier_offset; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s() re_tune=%d\n", __func__, re_tune); | 
 | 	if (re_tune) { | 
 | 		ret = cxd2841er_set_frontend_s(fe); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		cxd2841er_read_status_s(fe, status); | 
 | 		if (*status & FE_HAS_LOCK) { | 
 | 			if (cxd2841er_get_carrier_offset_s_s2( | 
 | 					priv, &carrier_offset)) | 
 | 				return -EINVAL; | 
 | 			p->frequency += carrier_offset; | 
 | 			ret = cxd2841er_set_frontend_s(fe); | 
 | 			if (ret) | 
 | 				return ret; | 
 | 		} | 
 | 	} | 
 | 	*delay = HZ / 5; | 
 | 	return cxd2841er_read_status_s(fe, status); | 
 | } | 
 |  | 
 | static int cxd2841er_tune_tc(struct dvb_frontend *fe, | 
 | 			     bool re_tune, | 
 | 			     unsigned int mode_flags, | 
 | 			     unsigned int *delay, | 
 | 			     enum fe_status *status) | 
 | { | 
 | 	int ret, carrier_offset; | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): re_tune %d bandwidth=%d\n", __func__, | 
 | 			re_tune, p->bandwidth_hz); | 
 | 	if (re_tune) { | 
 | 		ret = cxd2841er_set_frontend_tc(fe); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		cxd2841er_read_status_tc(fe, status); | 
 | 		if (*status & FE_HAS_LOCK) { | 
 | 			switch (priv->system) { | 
 | 			case SYS_ISDBT: | 
 | 				ret = cxd2841er_get_carrier_offset_i( | 
 | 						priv, p->bandwidth_hz, | 
 | 						&carrier_offset); | 
 | 				if (ret) | 
 | 					return ret; | 
 | 				break; | 
 | 			case SYS_DVBT: | 
 | 				ret = cxd2841er_get_carrier_offset_t( | 
 | 					priv, p->bandwidth_hz, | 
 | 					&carrier_offset); | 
 | 				if (ret) | 
 | 					return ret; | 
 | 				break; | 
 | 			case SYS_DVBT2: | 
 | 				ret = cxd2841er_get_carrier_offset_t2( | 
 | 					priv, p->bandwidth_hz, | 
 | 					&carrier_offset); | 
 | 				if (ret) | 
 | 					return ret; | 
 | 				break; | 
 | 			case SYS_DVBC_ANNEX_A: | 
 | 				ret = cxd2841er_get_carrier_offset_c( | 
 | 					priv, &carrier_offset); | 
 | 				if (ret) | 
 | 					return ret; | 
 | 				break; | 
 | 			default: | 
 | 				dev_dbg(&priv->i2c->dev, | 
 | 					"%s(): invalid delivery system %d\n", | 
 | 					__func__, priv->system); | 
 | 				return -EINVAL; | 
 | 			} | 
 | 			dev_dbg(&priv->i2c->dev, "%s(): carrier offset %d\n", | 
 | 				__func__, carrier_offset); | 
 | 			p->frequency += carrier_offset; | 
 | 			ret = cxd2841er_set_frontend_tc(fe); | 
 | 			if (ret) | 
 | 				return ret; | 
 | 		} | 
 | 	} | 
 | 	*delay = HZ / 5; | 
 | 	return cxd2841er_read_status_tc(fe, status); | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_s(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	cxd2841er_active_s_to_sleep_s(fe->demodulator_priv); | 
 | 	cxd2841er_sleep_s_to_shutdown(fe->demodulator_priv); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_sleep_tc(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 |  | 
 | 	if (priv->state == STATE_ACTIVE_TC) { | 
 | 		switch (priv->system) { | 
 | 		case SYS_DVBT: | 
 | 			cxd2841er_active_t_to_sleep_tc(priv); | 
 | 			break; | 
 | 		case SYS_DVBT2: | 
 | 			cxd2841er_active_t2_to_sleep_tc(priv); | 
 | 			break; | 
 | 		case SYS_ISDBT: | 
 | 			cxd2841er_active_i_to_sleep_tc(priv); | 
 | 			break; | 
 | 		case SYS_DVBC_ANNEX_A: | 
 | 			cxd2841er_active_c_to_sleep_tc(priv); | 
 | 			break; | 
 | 		default: | 
 | 			dev_warn(&priv->i2c->dev, | 
 | 				"%s(): unknown delivery system %d\n", | 
 | 				__func__, priv->system); | 
 | 		} | 
 | 	} | 
 | 	if (priv->state != STATE_SLEEP_TC) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_shutdown_tc(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 |  | 
 | 	if (!cxd2841er_sleep_tc(fe)) | 
 | 		cxd2841er_sleep_tc_to_shutdown(priv); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_send_burst(struct dvb_frontend *fe, | 
 | 				enum fe_sec_mini_cmd burst) | 
 | { | 
 | 	u8 data; | 
 | 	struct cxd2841er_priv *priv  = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): burst mode %s\n", __func__, | 
 | 		(burst == SEC_MINI_A ? "A" : "B")); | 
 | 	if (priv->state != STATE_SLEEP_S && | 
 | 			priv->state != STATE_ACTIVE_S) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid demod state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	data = (burst == SEC_MINI_A ? 0 : 1); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xbb); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x34, 0x01); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x35, data); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_set_tone(struct dvb_frontend *fe, | 
 | 			      enum fe_sec_tone_mode tone) | 
 | { | 
 | 	u8 data; | 
 | 	struct cxd2841er_priv *priv  = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): tone %s\n", __func__, | 
 | 		(tone == SEC_TONE_ON ? "On" : "Off")); | 
 | 	if (priv->state != STATE_SLEEP_S && | 
 | 			priv->state != STATE_ACTIVE_S) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid demod state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	data = (tone == SEC_TONE_ON ? 1 : 0); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xbb); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x36, data); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_send_diseqc_msg(struct dvb_frontend *fe, | 
 | 				     struct dvb_diseqc_master_cmd *cmd) | 
 | { | 
 | 	int i; | 
 | 	u8 data[12]; | 
 | 	struct cxd2841er_priv *priv  = fe->demodulator_priv; | 
 |  | 
 | 	if (priv->state != STATE_SLEEP_S && | 
 | 			priv->state != STATE_ACTIVE_S) { | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid demod state %d\n", | 
 | 			__func__, priv->state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 		"%s(): cmd->len %d\n", __func__, cmd->msg_len); | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xbb); | 
 | 	/* DiDEqC enable */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x33, 0x01); | 
 | 	/* cmd1 length & data */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x3d, cmd->msg_len); | 
 | 	memset(data, 0, sizeof(data)); | 
 | 	for (i = 0; i < cmd->msg_len && i < sizeof(data); i++) | 
 | 		data[i] = cmd->msg[i]; | 
 | 	cxd2841er_write_regs(priv, I2C_SLVT, 0x3e, data, sizeof(data)); | 
 | 	/* repeat count for cmd1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x37, 1); | 
 | 	/* repeat count for cmd2: always 0 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x38, 0); | 
 | 	/* start transmit */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x32, 0x01); | 
 | 	/* wait for 1 sec timeout */ | 
 | 	for (i = 0; i < 50; i++) { | 
 | 		cxd2841er_read_reg(priv, I2C_SLVT, 0x10, data); | 
 | 		if (!data[0]) { | 
 | 			dev_dbg(&priv->i2c->dev, | 
 | 				"%s(): DiSEqC cmd has been sent\n", __func__); | 
 | 			return 0; | 
 | 		} | 
 | 		msleep(20); | 
 | 	} | 
 | 	dev_dbg(&priv->i2c->dev, | 
 | 		"%s(): DiSEqC cmd transmit timeout\n", __func__); | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | static void cxd2841er_release(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv  = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	kfree(priv); | 
 | } | 
 |  | 
 | static int cxd2841er_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s(): enable=%d\n", __func__, enable); | 
 | 	cxd2841er_set_reg_bits( | 
 | 		priv, I2C_SLVX, 0x8, (enable ? 0x01 : 0x00), 0x01); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static enum dvbfe_algo cxd2841er_get_algo(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	return DVBFE_ALGO_HW; | 
 | } | 
 |  | 
 | static void cxd2841er_init_stats(struct dvb_frontend *fe) | 
 | { | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 |  | 
 | 	p->strength.len = 1; | 
 | 	p->strength.stat[0].scale = FE_SCALE_RELATIVE; | 
 | 	p->cnr.len = 1; | 
 | 	p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	p->block_error.len = 1; | 
 | 	p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	p->post_bit_error.len = 1; | 
 | 	p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | 	p->post_bit_count.len = 1; | 
 | 	p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | 
 | } | 
 |  | 
 |  | 
 | static int cxd2841er_init_s(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 |  | 
 | 	/* sanity. force demod to SHUTDOWN state */ | 
 | 	if (priv->state == STATE_SLEEP_S) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s() forcing sleep->shutdown\n", | 
 | 				__func__); | 
 | 		cxd2841er_sleep_s_to_shutdown(priv); | 
 | 	} else if (priv->state == STATE_ACTIVE_S) { | 
 | 		dev_dbg(&priv->i2c->dev, "%s() forcing active->sleep->shutdown\n", | 
 | 				__func__); | 
 | 		cxd2841er_active_s_to_sleep_s(priv); | 
 | 		cxd2841er_sleep_s_to_shutdown(priv); | 
 | 	} | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s()\n", __func__); | 
 | 	cxd2841er_shutdown_to_sleep_s(priv); | 
 | 	/* SONY_DEMOD_CONFIG_SAT_IFAGCNEG set to 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0xa0); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xb9, 0x01, 0x01); | 
 |  | 
 | 	cxd2841er_init_stats(fe); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cxd2841er_init_tc(struct dvb_frontend *fe) | 
 | { | 
 | 	struct cxd2841er_priv *priv = fe->demodulator_priv; | 
 | 	struct dtv_frontend_properties *p = &fe->dtv_property_cache; | 
 |  | 
 | 	dev_dbg(&priv->i2c->dev, "%s() bandwidth_hz=%d\n", | 
 | 			__func__, p->bandwidth_hz); | 
 | 	cxd2841er_shutdown_to_sleep_tc(priv); | 
 | 	/* SONY_DEMOD_CONFIG_IFAGCNEG = 1 (0 for NO_AGCNEG */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x10); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xcb, | 
 | 		((priv->flags & CXD2841ER_NO_AGCNEG) ? 0x00 : 0x40), 0x40); | 
 | 	/* SONY_DEMOD_CONFIG_IFAGC_ADC_FS = 0 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0xcd, 0x50); | 
 | 	/* SONY_DEMOD_CONFIG_PARALLEL_SEL = 1 */ | 
 | 	cxd2841er_write_reg(priv, I2C_SLVT, 0x00, 0x00); | 
 | 	cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xc4, | 
 | 		((priv->flags & CXD2841ER_TS_SERIAL) ? 0x80 : 0x00), 0x80); | 
 |  | 
 | 	/* clear TSCFG bits 3+4 */ | 
 | 	if (priv->flags & CXD2841ER_TSBITS) | 
 | 		cxd2841er_set_reg_bits(priv, I2C_SLVT, 0xc4, 0x00, 0x18); | 
 |  | 
 | 	cxd2841er_init_stats(fe); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dvb_frontend_ops cxd2841er_dvbs_s2_ops; | 
 | static struct dvb_frontend_ops cxd2841er_t_c_ops; | 
 |  | 
 | static struct dvb_frontend *cxd2841er_attach(struct cxd2841er_config *cfg, | 
 | 					     struct i2c_adapter *i2c, | 
 | 					     u8 system) | 
 | { | 
 | 	u8 chip_id = 0; | 
 | 	const char *type; | 
 | 	const char *name; | 
 | 	struct cxd2841er_priv *priv = NULL; | 
 |  | 
 | 	/* allocate memory for the internal state */ | 
 | 	priv = kzalloc(sizeof(struct cxd2841er_priv), GFP_KERNEL); | 
 | 	if (!priv) | 
 | 		return NULL; | 
 | 	priv->i2c = i2c; | 
 | 	priv->config = cfg; | 
 | 	priv->i2c_addr_slvx = (cfg->i2c_addr + 4) >> 1; | 
 | 	priv->i2c_addr_slvt = (cfg->i2c_addr) >> 1; | 
 | 	priv->xtal = cfg->xtal; | 
 | 	priv->flags = cfg->flags; | 
 | 	priv->frontend.demodulator_priv = priv; | 
 | 	dev_info(&priv->i2c->dev, | 
 | 		"%s(): I2C adapter %p SLVX addr %x SLVT addr %x\n", | 
 | 		__func__, priv->i2c, | 
 | 		priv->i2c_addr_slvx, priv->i2c_addr_slvt); | 
 | 	chip_id = cxd2841er_chip_id(priv); | 
 | 	switch (chip_id) { | 
 | 	case CXD2837ER_CHIP_ID: | 
 | 		snprintf(cxd2841er_t_c_ops.info.name, 128, | 
 | 				"Sony CXD2837ER DVB-T/T2/C demodulator"); | 
 | 		name = "CXD2837ER"; | 
 | 		type = "C/T/T2"; | 
 | 		break; | 
 | 	case CXD2838ER_CHIP_ID: | 
 | 		snprintf(cxd2841er_t_c_ops.info.name, 128, | 
 | 				"Sony CXD2838ER ISDB-T demodulator"); | 
 | 		cxd2841er_t_c_ops.delsys[0] = SYS_ISDBT; | 
 | 		cxd2841er_t_c_ops.delsys[1] = SYS_UNDEFINED; | 
 | 		cxd2841er_t_c_ops.delsys[2] = SYS_UNDEFINED; | 
 | 		name = "CXD2838ER"; | 
 | 		type = "ISDB-T"; | 
 | 		break; | 
 | 	case CXD2841ER_CHIP_ID: | 
 | 		snprintf(cxd2841er_t_c_ops.info.name, 128, | 
 | 				"Sony CXD2841ER DVB-T/T2/C demodulator"); | 
 | 		name = "CXD2841ER"; | 
 | 		type = "T/T2/C/ISDB-T"; | 
 | 		break; | 
 | 	case CXD2843ER_CHIP_ID: | 
 | 		snprintf(cxd2841er_t_c_ops.info.name, 128, | 
 | 				"Sony CXD2843ER DVB-T/T2/C/C2 demodulator"); | 
 | 		name = "CXD2843ER"; | 
 | 		type = "C/C2/T/T2"; | 
 | 		break; | 
 | 	case CXD2854ER_CHIP_ID: | 
 | 		snprintf(cxd2841er_t_c_ops.info.name, 128, | 
 | 				"Sony CXD2854ER DVB-T/T2/C and ISDB-T demodulator"); | 
 | 		cxd2841er_t_c_ops.delsys[3] = SYS_ISDBT; | 
 | 		name = "CXD2854ER"; | 
 | 		type = "C/C2/T/T2/ISDB-T"; | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(&priv->i2c->dev, "%s(): invalid chip ID 0x%02x\n", | 
 | 				__func__, chip_id); | 
 | 		priv->frontend.demodulator_priv = NULL; | 
 | 		kfree(priv); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* create dvb_frontend */ | 
 | 	if (system == SYS_DVBS) { | 
 | 		memcpy(&priv->frontend.ops, | 
 | 			&cxd2841er_dvbs_s2_ops, | 
 | 			sizeof(struct dvb_frontend_ops)); | 
 | 		type = "S/S2"; | 
 | 	} else { | 
 | 		memcpy(&priv->frontend.ops, | 
 | 			&cxd2841er_t_c_ops, | 
 | 			sizeof(struct dvb_frontend_ops)); | 
 | 	} | 
 |  | 
 | 	dev_info(&priv->i2c->dev, | 
 | 		"%s(): attaching %s DVB-%s frontend\n", | 
 | 		__func__, name, type); | 
 | 	dev_info(&priv->i2c->dev, "%s(): chip ID 0x%02x OK.\n", | 
 | 		__func__, chip_id); | 
 | 	return &priv->frontend; | 
 | } | 
 |  | 
 | struct dvb_frontend *cxd2841er_attach_s(struct cxd2841er_config *cfg, | 
 | 					struct i2c_adapter *i2c) | 
 | { | 
 | 	return cxd2841er_attach(cfg, i2c, SYS_DVBS); | 
 | } | 
 | EXPORT_SYMBOL(cxd2841er_attach_s); | 
 |  | 
 | struct dvb_frontend *cxd2841er_attach_t_c(struct cxd2841er_config *cfg, | 
 | 					struct i2c_adapter *i2c) | 
 | { | 
 | 	return cxd2841er_attach(cfg, i2c, 0); | 
 | } | 
 | EXPORT_SYMBOL(cxd2841er_attach_t_c); | 
 |  | 
 | static const struct dvb_frontend_ops cxd2841er_dvbs_s2_ops = { | 
 | 	.delsys = { SYS_DVBS, SYS_DVBS2 }, | 
 | 	.info = { | 
 | 		.name		= "Sony CXD2841ER DVB-S/S2 demodulator", | 
 | 		.frequency_min_hz	=  500 * MHz, | 
 | 		.frequency_max_hz	= 2500 * MHz, | 
 | 		.symbol_rate_min = 1000000, | 
 | 		.symbol_rate_max = 45000000, | 
 | 		.symbol_rate_tolerance = 500, | 
 | 		.caps = FE_CAN_INVERSION_AUTO | | 
 | 			FE_CAN_FEC_AUTO | | 
 | 			FE_CAN_QPSK, | 
 | 	}, | 
 | 	.init = cxd2841er_init_s, | 
 | 	.sleep = cxd2841er_sleep_s, | 
 | 	.release = cxd2841er_release, | 
 | 	.set_frontend = cxd2841er_set_frontend_s, | 
 | 	.get_frontend = cxd2841er_get_frontend, | 
 | 	.read_status = cxd2841er_read_status_s, | 
 | 	.i2c_gate_ctrl = cxd2841er_i2c_gate_ctrl, | 
 | 	.get_frontend_algo = cxd2841er_get_algo, | 
 | 	.set_tone = cxd2841er_set_tone, | 
 | 	.diseqc_send_burst = cxd2841er_send_burst, | 
 | 	.diseqc_send_master_cmd = cxd2841er_send_diseqc_msg, | 
 | 	.tune = cxd2841er_tune_s | 
 | }; | 
 |  | 
 | static struct dvb_frontend_ops cxd2841er_t_c_ops = { | 
 | 	.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, | 
 | 	.info = { | 
 | 		.name	= "", /* will set in attach function */ | 
 | 		.caps = FE_CAN_FEC_1_2 | | 
 | 			FE_CAN_FEC_2_3 | | 
 | 			FE_CAN_FEC_3_4 | | 
 | 			FE_CAN_FEC_5_6 | | 
 | 			FE_CAN_FEC_7_8 | | 
 | 			FE_CAN_FEC_AUTO | | 
 | 			FE_CAN_QPSK | | 
 | 			FE_CAN_QAM_16 | | 
 | 			FE_CAN_QAM_32 | | 
 | 			FE_CAN_QAM_64 | | 
 | 			FE_CAN_QAM_128 | | 
 | 			FE_CAN_QAM_256 | | 
 | 			FE_CAN_QAM_AUTO | | 
 | 			FE_CAN_TRANSMISSION_MODE_AUTO | | 
 | 			FE_CAN_GUARD_INTERVAL_AUTO | | 
 | 			FE_CAN_HIERARCHY_AUTO | | 
 | 			FE_CAN_MUTE_TS | | 
 | 			FE_CAN_2G_MODULATION, | 
 | 		.frequency_min_hz =   42 * MHz, | 
 | 		.frequency_max_hz = 1002 * MHz, | 
 | 		.symbol_rate_min = 870000, | 
 | 		.symbol_rate_max = 11700000 | 
 | 	}, | 
 | 	.init = cxd2841er_init_tc, | 
 | 	.sleep = cxd2841er_shutdown_tc, | 
 | 	.release = cxd2841er_release, | 
 | 	.set_frontend = cxd2841er_set_frontend_tc, | 
 | 	.get_frontend = cxd2841er_get_frontend, | 
 | 	.read_status = cxd2841er_read_status_tc, | 
 | 	.tune = cxd2841er_tune_tc, | 
 | 	.i2c_gate_ctrl = cxd2841er_i2c_gate_ctrl, | 
 | 	.get_frontend_algo = cxd2841er_get_algo | 
 | }; | 
 |  | 
 | MODULE_DESCRIPTION("Sony CXD2837/38/41/43/54ER DVB-C/C2/T/T2/S/S2 demodulator driver"); | 
 | MODULE_AUTHOR("Sergey Kozlov <serjk@netup.ru>, Abylay Ospan <aospan@netup.ru>"); | 
 | MODULE_LICENSE("GPL"); |