|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* display7seg.c - Driver implementation for the 7-segment display | 
|  | *                 present on Sun Microsystems CP1400 and CP1500 | 
|  | * | 
|  | * Copyright (c) 2000 Eric Brower (ebrower@usa.net) | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/miscdevice.h> | 
|  | #include <linux/ioport.h>		/* request_region */ | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/atomic.h> | 
|  | #include <linux/uaccess.h>		/* put_/get_user			*/ | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #include <asm/display7seg.h> | 
|  |  | 
|  | #define DRIVER_NAME	"d7s" | 
|  | #define PFX		DRIVER_NAME ": " | 
|  |  | 
|  | static DEFINE_MUTEX(d7s_mutex); | 
|  | static int sol_compat = 0;		/* Solaris compatibility mode	*/ | 
|  |  | 
|  | /* Solaris compatibility flag - | 
|  | * The Solaris implementation omits support for several | 
|  | * documented driver features (ref Sun doc 806-0180-03). | 
|  | * By default, this module supports the documented driver | 
|  | * abilities, rather than the Solaris implementation: | 
|  | * | 
|  | * 	1) Device ALWAYS reverts to OBP-specified FLIPPED mode | 
|  | * 	   upon closure of device or module unload. | 
|  | * 	2) Device ioctls D7SIOCRD/D7SIOCWR honor toggling of | 
|  | * 	   FLIP bit | 
|  | * | 
|  | * If you wish the device to operate as under Solaris, | 
|  | * omitting above features, set this parameter to non-zero. | 
|  | */ | 
|  | module_param(sol_compat, int, 0); | 
|  | MODULE_PARM_DESC(sol_compat, | 
|  | "Disables documented functionality omitted from Solaris driver"); | 
|  |  | 
|  | MODULE_AUTHOR("Eric Brower <ebrower@usa.net>"); | 
|  | MODULE_DESCRIPTION("7-Segment Display driver for Sun Microsystems CP1400/1500"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | struct d7s { | 
|  | void __iomem	*regs; | 
|  | bool		flipped; | 
|  | }; | 
|  | struct d7s *d7s_device; | 
|  |  | 
|  | /* | 
|  | * Register block address- see header for details | 
|  | * ----------------------------------------- | 
|  | * | DP | ALARM | FLIP | 4 | 3 | 2 | 1 | 0 | | 
|  | * ----------------------------------------- | 
|  | * | 
|  | * DP 		- Toggles decimal point on/off | 
|  | * ALARM	- Toggles "Alarm" LED green/red | 
|  | * FLIP		- Inverts display for upside-down mounted board | 
|  | * bits 0-4	- 7-segment display contents | 
|  | */ | 
|  | static atomic_t d7s_users = ATOMIC_INIT(0); | 
|  |  | 
|  | static int d7s_open(struct inode *inode, struct file *f) | 
|  | { | 
|  | if (D7S_MINOR != iminor(inode)) | 
|  | return -ENODEV; | 
|  | atomic_inc(&d7s_users); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int d7s_release(struct inode *inode, struct file *f) | 
|  | { | 
|  | /* Reset flipped state to OBP default only if | 
|  | * no other users have the device open and we | 
|  | * are not operating in solaris-compat mode | 
|  | */ | 
|  | if (atomic_dec_and_test(&d7s_users) && !sol_compat) { | 
|  | struct d7s *p = d7s_device; | 
|  | u8 regval = 0; | 
|  |  | 
|  | regval = readb(p->regs); | 
|  | if (p->flipped) | 
|  | regval |= D7S_FLIP; | 
|  | else | 
|  | regval &= ~D7S_FLIP; | 
|  | writeb(regval, p->regs); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct d7s *p = d7s_device; | 
|  | u8 regs = readb(p->regs); | 
|  | int error = 0; | 
|  | u8 ireg = 0; | 
|  |  | 
|  | if (D7S_MINOR != iminor(file_inode(file))) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&d7s_mutex); | 
|  | switch (cmd) { | 
|  | case D7SIOCWR: | 
|  | /* assign device register values we mask-out D7S_FLIP | 
|  | * if in sol_compat mode | 
|  | */ | 
|  | if (get_user(ireg, (int __user *) arg)) { | 
|  | error = -EFAULT; | 
|  | break; | 
|  | } | 
|  | if (sol_compat) { | 
|  | if (regs & D7S_FLIP) | 
|  | ireg |= D7S_FLIP; | 
|  | else | 
|  | ireg &= ~D7S_FLIP; | 
|  | } | 
|  | writeb(ireg, p->regs); | 
|  | break; | 
|  |  | 
|  | case D7SIOCRD: | 
|  | /* retrieve device register values | 
|  | * NOTE: Solaris implementation returns D7S_FLIP bit | 
|  | * as toggled by user, even though it does not honor it. | 
|  | * This driver will not misinform you about the state | 
|  | * of your hardware while in sol_compat mode | 
|  | */ | 
|  | if (put_user(regs, (int __user *) arg)) { | 
|  | error = -EFAULT; | 
|  | break; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case D7SIOCTM: | 
|  | /* toggle device mode-- flip display orientation */ | 
|  | regs ^= D7S_FLIP; | 
|  | writeb(regs, p->regs); | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&d7s_mutex); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static const struct file_operations d7s_fops = { | 
|  | .owner =		THIS_MODULE, | 
|  | .unlocked_ioctl =	d7s_ioctl, | 
|  | .compat_ioctl =		compat_ptr_ioctl, | 
|  | .open =			d7s_open, | 
|  | .release =		d7s_release, | 
|  | .llseek = noop_llseek, | 
|  | }; | 
|  |  | 
|  | static struct miscdevice d7s_miscdev = { | 
|  | .minor		= D7S_MINOR, | 
|  | .name		= DRIVER_NAME, | 
|  | .fops		= &d7s_fops | 
|  | }; | 
|  |  | 
|  | static int d7s_probe(struct platform_device *op) | 
|  | { | 
|  | struct device_node *opts; | 
|  | int err = -EINVAL; | 
|  | struct d7s *p; | 
|  | u8 regs; | 
|  |  | 
|  | if (d7s_device) | 
|  | goto out; | 
|  |  | 
|  | p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL); | 
|  | err = -ENOMEM; | 
|  | if (!p) | 
|  | goto out; | 
|  |  | 
|  | p->regs = of_ioremap(&op->resource[0], 0, sizeof(u8), "d7s"); | 
|  | if (!p->regs) { | 
|  | printk(KERN_ERR PFX "Cannot map chip registers\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = misc_register(&d7s_miscdev); | 
|  | if (err) { | 
|  | printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n", | 
|  | D7S_MINOR); | 
|  | goto out_iounmap; | 
|  | } | 
|  |  | 
|  | /* OBP option "d7s-flipped?" is honored as default for the | 
|  | * device, and reset default when detached | 
|  | */ | 
|  | regs = readb(p->regs); | 
|  | opts = of_find_node_by_path("/options"); | 
|  | if (opts && | 
|  | of_get_property(opts, "d7s-flipped?", NULL)) | 
|  | p->flipped = true; | 
|  |  | 
|  | if (p->flipped) | 
|  | regs |= D7S_FLIP; | 
|  | else | 
|  | regs &= ~D7S_FLIP; | 
|  |  | 
|  | writeb(regs,  p->regs); | 
|  |  | 
|  | printk(KERN_INFO PFX "7-Segment Display%pOF at [%s:0x%llx] %s\n", | 
|  | op->dev.of_node, | 
|  | (regs & D7S_FLIP) ? " (FLIPPED)" : "", | 
|  | op->resource[0].start, | 
|  | sol_compat ? "in sol_compat mode" : ""); | 
|  |  | 
|  | dev_set_drvdata(&op->dev, p); | 
|  | d7s_device = p; | 
|  | err = 0; | 
|  | of_node_put(opts); | 
|  |  | 
|  | out: | 
|  | return err; | 
|  |  | 
|  | out_iounmap: | 
|  | of_iounmap(&op->resource[0], p->regs, sizeof(u8)); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | static int d7s_remove(struct platform_device *op) | 
|  | { | 
|  | struct d7s *p = dev_get_drvdata(&op->dev); | 
|  | u8 regs = readb(p->regs); | 
|  |  | 
|  | /* Honor OBP d7s-flipped? unless operating in solaris-compat mode */ | 
|  | if (sol_compat) { | 
|  | if (p->flipped) | 
|  | regs |= D7S_FLIP; | 
|  | else | 
|  | regs &= ~D7S_FLIP; | 
|  | writeb(regs, p->regs); | 
|  | } | 
|  |  | 
|  | misc_deregister(&d7s_miscdev); | 
|  | of_iounmap(&op->resource[0], p->regs, sizeof(u8)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id d7s_match[] = { | 
|  | { | 
|  | .name = "display7seg", | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, d7s_match); | 
|  |  | 
|  | static struct platform_driver d7s_driver = { | 
|  | .driver = { | 
|  | .name = DRIVER_NAME, | 
|  | .of_match_table = d7s_match, | 
|  | }, | 
|  | .probe		= d7s_probe, | 
|  | .remove		= d7s_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(d7s_driver); |