| Bindings for Synopsys DesignWare I3C master block |
| ================================================= |
| |
| Required properties: |
| -------------------- |
| - compatible: shall be "snps,dw-i3c-master-1.00a" |
| - clocks: shall reference the core_clk |
| - interrupts: the interrupt line connected to this I3C master |
| - reg: Offset and length of I3C master registers |
| |
| Mandatory properties defined by the generic binding (see |
| Documentation/devicetree/bindings/i3c/i3c.txt for more details): |
| |
| - #address-cells: shall be set to 3 |
| - #size-cells: shall be set to 0 |
| |
| Optional properties defined by the generic binding (see |
| Documentation/devicetree/bindings/i3c/i3c.txt for more details): |
| |
| - i2c-scl-hz |
| - i3c-scl-hz |
| |
| I3C device connected on the bus follow the generic description (see |
| Documentation/devicetree/bindings/i3c/i3c.txt for more details). |
| |
| Example: |
| |
| i3c-master@2000 { |
| compatible = "snps,dw-i3c-master-1.00a"; |
| #address-cells = <3>; |
| #size-cells = <0>; |
| reg = <0x02000 0x1000>; |
| interrupts = <0>; |
| clocks = <&i3cclk>; |
| |
| eeprom@57{ |
| compatible = "atmel,24c01"; |
| reg = <0x57 0x0 0x10>; |
| pagesize = <0x8>; |
| }; |
| }; |
