arch/arm/kernel/head-nommu.S - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/kernel/head-nommu.S
  *
  *  Copyright (C) 1994-2002 Russell King
  *  Copyright (C) 2003-2006 Hyok S. Choi
  *
  *  Common kernel startup code (non-paged MM)
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/errno.h>

 #include <asm/assembler.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/memory.h>
 #include <asm/cp15.h>
 #include <asm/thread_info.h>
 #include <asm/v7m.h>
 #include <asm/mpu.h>
 #include <asm/page.h>

 /*
  * Kernel startup entry point.
  * ---------------------------
  *
  * This is normally called from the decompressor code.  The requirements
  * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
  * r1 = machine nr.
  *
  * See linux/arch/arm/tools/mach-types for the complete list of machine
  * numbers for r1.
  *
  */

 	__HEAD

 #ifdef CONFIG_CPU_THUMBONLY
 	.thumb
 ENTRY(stext)
 #else
 	.arm
 ENTRY(stext)

  THUMB(	badr	r9, 1f		)	@ Kernel is always entered in ARM.
  THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
 #endif

 #ifdef CONFIG_ARM_VIRT_EXT
 	bl	__hyp_stub_install
 #endif
 	@ ensure svc mode and all interrupts masked
 	safe_svcmode_maskall r9
 						@ and irqs disabled
 #if defined(CONFIG_CPU_CP15)
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 #elif defined(CONFIG_CPU_V7M)
 	ldr	r9, =BASEADDR_V7M_SCB
 	ldr	r9, [r9, V7M_SCB_CPUID]
 #else
 	ldr	r9, =CONFIG_PROCESSOR_ID
 #endif
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
 	beq	__error_p				@ yes, error 'p'

 #ifdef CONFIG_ARM_MPU
 	bl	__setup_mpu
 #endif

 	badr	lr, 1f				@ return (PIC) address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
 	ret	r12
 1:	ldr	lr, =__mmap_switched
 	b	__after_proc_init
 ENDPROC(stext)

 #ifdef CONFIG_SMP
 	.text
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.
 	 *
 	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
 #ifdef CONFIG_ARM_VIRT_EXT
 	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r9

 #ifndef CONFIG_CPU_CP15
 	ldr	r9, =CONFIG_PROCESSOR_ID
 #else
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 #endif
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor?
 	beq	__error_p			@ yes, error 'p'

 	ldr	r7, __secondary_data

 #ifdef CONFIG_ARM_MPU
 	bl      __secondary_setup_mpu		@ Initialize the MPU
 #endif

 	badr	lr, 1f				@ return (PIC) address
 	ldr	r12, [r10, #PROCINFO_INITFUNC]
 	add	r12, r12, r10
 	ret	r12
 1:	bl	__after_proc_init
 	ldr	sp, [r7, #12]			@ set up the stack pointer
 	mov	fp, #0
 	b	secondary_start_kernel
 ENDPROC(secondary_startup)

 	.type	__secondary_data, %object
 __secondary_data:
 	.long	secondary_data
 #endif /* CONFIG_SMP */

 /*
  * Set the Control Register and Read the process ID.
  */
 	.text
 __after_proc_init:
 M_CLASS(movw	r12, #:lower16:BASEADDR_V7M_SCB)
 M_CLASS(movt	r12, #:upper16:BASEADDR_V7M_SCB)
 #ifdef CONFIG_ARM_MPU
 M_CLASS(ldr	r3, [r12, 0x50])
 AR_CLASS(mrc	p15, 0, r3, c0, c1, 4)          @ Read ID_MMFR0
 	and	r3, r3, #(MMFR0_PMSA)           @ PMSA field
 	teq	r3, #(MMFR0_PMSAv7)             @ PMSA v7
 	beq	1f
 	teq	r3, #(MMFR0_PMSAv8)		@ PMSA v8
 	/*
 	 * Memory region attributes for PMSAv8:
 	 *
 	 *   n = AttrIndx[2:0]
 	 *                      n       MAIR
 	 *   DEVICE_nGnRnE      000     00000000
 	 *   NORMAL             001     11111111
 	 */
 	ldreq	r3, =PMSAv8_MAIR(0x00, PMSAv8_RGN_DEVICE_nGnRnE) | \
 		     PMSAv8_MAIR(0xff, PMSAv8_RGN_NORMAL)
 AR_CLASS(mcreq	p15, 0, r3, c10, c2, 0)		@ MAIR 0
 M_CLASS(streq	r3, [r12, #PMSAv8_MAIR0])
 	moveq	r3, #0
 AR_CLASS(mcreq	p15, 0, r3, c10, c2, 1)		@ MAIR 1
 M_CLASS(streq	r3, [r12, #PMSAv8_MAIR1])

 1:
 #endif
 #ifdef CONFIG_CPU_CP15
 	/*
 	 * CP15 system control register value returned in r0 from
 	 * the CPU init function.
 	 */

 #ifdef CONFIG_ARM_MPU
 	biceq	r0, r0, #CR_BR			@ Disable the 'default mem-map'
 	orreq	r0, r0, #CR_M			@ Set SCTRL.M (MPU on)
 #endif
 #if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A
 #endif
 #ifdef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #CR_C
 #endif
 #ifdef CONFIG_CPU_BPREDICT_DISABLE
 	bic	r0, r0, #CR_Z
 #endif
 #ifdef CONFIG_CPU_ICACHE_DISABLE
 	bic	r0, r0, #CR_I
 #endif
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	instr_sync
 #elif defined (CONFIG_CPU_V7M)
 #ifdef CONFIG_ARM_MPU
 	ldreq	r3, [r12, MPU_CTRL]
 	biceq	r3, #MPU_CTRL_PRIVDEFENA
 	orreq	r3, #MPU_CTRL_ENABLE
 	streq	r3, [r12, MPU_CTRL]
 	isb
 #endif
 	/* For V7M systems we want to modify the CCR similarly to the SCTLR */
 #ifdef CONFIG_CPU_DCACHE_DISABLE
 	bic	r0, r0, #V7M_SCB_CCR_DC
 #endif
 #ifdef CONFIG_CPU_BPREDICT_DISABLE
 	bic	r0, r0, #V7M_SCB_CCR_BP
 #endif
 #ifdef CONFIG_CPU_ICACHE_DISABLE
 	bic	r0, r0, #V7M_SCB_CCR_IC
 #endif
 	str	r0, [r12, V7M_SCB_CCR]
 	/* Pass exc_ret to __mmap_switched */
 	mov	r0, r10
 #endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
 	ret	lr
 ENDPROC(__after_proc_init)
 	.ltorg

 #ifdef CONFIG_ARM_MPU


 #ifndef CONFIG_CPU_V7M
 /* Set which MPU region should be programmed */
 .macro set_region_nr tmp, rgnr, unused
 	mov	\tmp, \rgnr			@ Use static region numbers
 	mcr	p15, 0, \tmp, c6, c2, 0		@ Write RGNR
 .endm

 /* Setup a single MPU region, either D or I side (D-side for unified) */
 .macro setup_region bar, acr, sr, side = PMSAv7_DATA_SIDE, unused
 	mcr	p15, 0, \bar, c6, c1, (0 + \side)	@ I/DRBAR
 	mcr	p15, 0, \acr, c6, c1, (4 + \side)	@ I/DRACR
 	mcr	p15, 0, \sr, c6, c1, (2 + \side)		@ I/DRSR
 .endm
 #else
 .macro set_region_nr tmp, rgnr, base
 	mov	\tmp, \rgnr
 	str     \tmp, [\base, #PMSAv7_RNR]
 .endm

 .macro setup_region bar, acr, sr, unused, base
 	lsl     \acr, \acr, #16
 	orr     \acr, \acr, \sr
 	str     \bar, [\base, #PMSAv7_RBAR]
 	str     \acr, [\base, #PMSAv7_RASR]
 .endm

 #endif
 /*
  * Setup the MPU and initial MPU Regions. We create the following regions:
  * Region 0: Use this for probing the MPU details, so leave disabled.
  * Region 1: Background region - covers the whole of RAM as strongly ordered
  * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
  * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
  *
  * r6: Value to be written to DRSR (and IRSR if required) for PMSAv7_RAM_REGION
 */
 	__HEAD

 ENTRY(__setup_mpu)

 	/* Probe for v7 PMSA compliance */
 M_CLASS(movw	r12, #:lower16:BASEADDR_V7M_SCB)
 M_CLASS(movt	r12, #:upper16:BASEADDR_V7M_SCB)

 AR_CLASS(mrc	p15, 0, r0, c0, c1, 4)		@ Read ID_MMFR0
 M_CLASS(ldr	r0, [r12, 0x50])
 	and	r0, r0, #(MMFR0_PMSA)		@ PMSA field
 	teq	r0, #(MMFR0_PMSAv7)		@ PMSA v7
 	beq	__setup_pmsa_v7
 	teq	r0, #(MMFR0_PMSAv8)		@ PMSA v8
 	beq	__setup_pmsa_v8

 	ret	lr
 ENDPROC(__setup_mpu)

 ENTRY(__setup_pmsa_v7)
 	/* Calculate the size of a region covering just the kernel */
 	ldr	r5, =PLAT_PHYS_OFFSET		@ Region start: PHYS_OFFSET
 	ldr     r6, =(_end)			@ Cover whole kernel
 	sub	r6, r6, r5			@ Minimum size of region to map
 	clz	r6, r6				@ Region size must be 2^N...
 	rsb	r6, r6, #31			@ ...so round up region size
 	lsl	r6, r6, #PMSAv7_RSR_SZ		@ Put size in right field
 	orr	r6, r6, #(1 << PMSAv7_RSR_EN)	@ Set region enabled bit

 	/* Determine whether the D/I-side memory map is unified. We set the
 	 * flags here and continue to use them for the rest of this function */
 AR_CLASS(mrc	p15, 0, r0, c0, c0, 4)		@ MPUIR
 M_CLASS(ldr    r0, [r12, #MPU_TYPE])
 	ands	r5, r0, #MPUIR_DREGION_SZMASK	@ 0 size d region => No MPU
 	bxeq	lr
 	tst	r0, #MPUIR_nU			@ MPUIR_nU = 0 for unified

 	/* Setup second region first to free up r6 */
 	set_region_nr r0, #PMSAv7_RAM_REGION, r12
 	isb
 	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
 	ldr	r0, =PLAT_PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
 	ldr	r5,=(PMSAv7_AP_PL1RW_PL0RW | PMSAv7_RGN_NORMAL)

 	setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12	@ PHYS_OFFSET, shared, enabled
 	beq	1f					@ Memory-map not unified
 	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12	@ PHYS_OFFSET, shared, enabled
 1:	isb

 	/* First/background region */
 	set_region_nr r0, #PMSAv7_BG_REGION, r12
 	isb
 	/* Execute Never,  strongly ordered, inaccessible to PL0, rw PL1  */
 	mov	r0, #0				@ BG region starts at 0x0
 	ldr	r5,=(PMSAv7_ACR_XN | PMSAv7_RGN_STRONGLY_ORDERED | PMSAv7_AP_PL1RW_PL0NA)
 	mov	r6, #PMSAv7_RSR_ALL_MEM		@ 4GB region, enabled

 	setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12	@ 0x0, BG region, enabled
 	beq	2f					@ Memory-map not unified
 	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE r12	@ 0x0, BG region, enabled
 2:	isb

 #ifdef CONFIG_XIP_KERNEL
 	set_region_nr r0, #PMSAv7_ROM_REGION, r12
 	isb

 	ldr	r5,=(PMSAv7_AP_PL1RO_PL0NA | PMSAv7_RGN_NORMAL)

 	ldr	r0, =CONFIG_XIP_PHYS_ADDR		@ ROM start
 	ldr     r6, =(_exiprom)				@ ROM end
 	sub	r6, r6, r0				@ Minimum size of region to map
 	clz	r6, r6					@ Region size must be 2^N...
 	rsb	r6, r6, #31				@ ...so round up region size
 	lsl	r6, r6, #PMSAv7_RSR_SZ			@ Put size in right field
 	orr	r6, r6, #(1 << PMSAv7_RSR_EN)		@ Set region enabled bit

 	setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12	@ XIP_PHYS_ADDR, shared, enabled
 	beq	3f					@ Memory-map not unified
 	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12	@ XIP_PHYS_ADDR, shared, enabled
 3:	isb
 #endif
 	ret	lr
 ENDPROC(__setup_pmsa_v7)

 ENTRY(__setup_pmsa_v8)
 	mov	r0, #0
 AR_CLASS(mcr	p15, 0, r0, c6, c2, 1)		@ PRSEL
 M_CLASS(str	r0, [r12, #PMSAv8_RNR])
 	isb

 #ifdef CONFIG_XIP_KERNEL
 	ldr	r5, =CONFIG_XIP_PHYS_ADDR		@ ROM start
 	ldr     r6, =(_exiprom)				@ ROM end
 	sub	r6, r6, #1
 	bic	r6, r6, #(PMSAv8_MINALIGN - 1)

 	orr	r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED)
 	orr	r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN)

 AR_CLASS(mcr	p15, 0, r5, c6, c8, 0)			@ PRBAR0
 AR_CLASS(mcr	p15, 0, r6, c6, c8, 1)			@ PRLAR0
 M_CLASS(str	r5, [r12, #PMSAv8_RBAR_A(0)])
 M_CLASS(str	r6, [r12, #PMSAv8_RLAR_A(0)])
 #endif

 	ldr	r5, =KERNEL_START
 	ldr	r6, =KERNEL_END
 	sub	r6, r6, #1
 	bic	r6, r6, #(PMSAv8_MINALIGN - 1)

 	orr	r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED)
 	orr	r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN)

 AR_CLASS(mcr	p15, 0, r5, c6, c8, 4)			@ PRBAR1
 AR_CLASS(mcr	p15, 0, r6, c6, c8, 5)			@ PRLAR1
 M_CLASS(str	r5, [r12, #PMSAv8_RBAR_A(1)])
 M_CLASS(str	r6, [r12, #PMSAv8_RLAR_A(1)])

 	/* Setup Background: 0x0 - min(KERNEL_START, XIP_PHYS_ADDR) */
 #ifdef CONFIG_XIP_KERNEL
 	ldr	r6, =KERNEL_START
 	ldr	r5, =CONFIG_XIP_PHYS_ADDR
 	cmp	r6, r5
 	movcs	r6, r5
 #else
 	ldr	r6, =KERNEL_START
 #endif
 	cmp	r6, #0
 	beq	1f

 	mov	r5, #0
 	sub	r6, r6, #1
 	bic	r6, r6, #(PMSAv8_MINALIGN - 1)

 	orr	r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN)
 	orr	r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN)

 AR_CLASS(mcr	p15, 0, r5, c6, c9, 0)			@ PRBAR2
 AR_CLASS(mcr	p15, 0, r6, c6, c9, 1)			@ PRLAR2
 M_CLASS(str	r5, [r12, #PMSAv8_RBAR_A(2)])
 M_CLASS(str	r6, [r12, #PMSAv8_RLAR_A(2)])

 1:
 	/* Setup Background: max(KERNEL_END, _exiprom) - 0xffffffff */
 #ifdef CONFIG_XIP_KERNEL
 	ldr	r5, =KERNEL_END
 	ldr	r6, =(_exiprom)
 	cmp	r5, r6
 	movcc	r5, r6
 #else
 	ldr	r5, =KERNEL_END
 #endif
 	mov	r6, #0xffffffff
 	bic	r6, r6, #(PMSAv8_MINALIGN - 1)

 	orr	r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN)
 	orr	r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN)

 AR_CLASS(mcr	p15, 0, r5, c6, c9, 4)			@ PRBAR3
 AR_CLASS(mcr	p15, 0, r6, c6, c9, 5)			@ PRLAR3
 M_CLASS(str	r5, [r12, #PMSAv8_RBAR_A(3)])
 M_CLASS(str	r6, [r12, #PMSAv8_RLAR_A(3)])

 #ifdef CONFIG_XIP_KERNEL
 	/* Setup Background: min(_exiprom, KERNEL_END) - max(KERNEL_START, XIP_PHYS_ADDR) */
 	ldr	r5, =(_exiprom)
 	ldr	r6, =KERNEL_END
 	cmp	r5, r6
 	movcs	r5, r6

 	ldr	r6, =KERNEL_START
 	ldr	r0, =CONFIG_XIP_PHYS_ADDR
 	cmp	r6, r0
 	movcc	r6, r0

 	sub	r6, r6, #1
 	bic	r6, r6, #(PMSAv8_MINALIGN - 1)

 	orr	r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN)
 	orr	r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN)

 #ifdef CONFIG_CPU_V7M
 	/* There is no alias for n == 4 */
 	mov	r0, #4
 	str	r0, [r12, #PMSAv8_RNR]			@ PRSEL
 	isb

 	str	r5, [r12, #PMSAv8_RBAR_A(0)]
 	str	r6, [r12, #PMSAv8_RLAR_A(0)]
 #else
 	mcr	p15, 0, r5, c6, c10, 0			@ PRBAR4
 	mcr	p15, 0, r6, c6, c10, 1			@ PRLAR4
 #endif
 #endif
 	ret	lr
 ENDPROC(__setup_pmsa_v8)

 #ifdef CONFIG_SMP
 /*
  * r6: pointer at mpu_rgn_info
  */

 	.text
 ENTRY(__secondary_setup_mpu)
 	/* Use MPU region info supplied by __cpu_up */
 	ldr	r6, [r7]			@ get secondary_data.mpu_rgn_info

 	/* Probe for v7 PMSA compliance */
 	mrc	p15, 0, r0, c0, c1, 4		@ Read ID_MMFR0
 	and	r0, r0, #(MMFR0_PMSA)		@ PMSA field
 	teq	r0, #(MMFR0_PMSAv7)		@ PMSA v7
 	beq	__secondary_setup_pmsa_v7
 	teq	r0, #(MMFR0_PMSAv8)		@ PMSA v8
 	beq	__secondary_setup_pmsa_v8
 	b	__error_p
 ENDPROC(__secondary_setup_mpu)

 /*
  * r6: pointer at mpu_rgn_info
  */
 ENTRY(__secondary_setup_pmsa_v7)
 	/* Determine whether the D/I-side memory map is unified. We set the
 	 * flags here and continue to use them for the rest of this function */
 	mrc	p15, 0, r0, c0, c0, 4		@ MPUIR
 	ands	r5, r0, #MPUIR_DREGION_SZMASK	@ 0 size d region => No MPU
 	beq	__error_p

 	ldr	r4, [r6, #MPU_RNG_INFO_USED]
 	mov	r5, #MPU_RNG_SIZE
 	add	r3, r6, #MPU_RNG_INFO_RNGS
 	mla	r3, r4, r5, r3

 1:
 	tst	r0, #MPUIR_nU			@ MPUIR_nU = 0 for unified
 	sub	r3, r3, #MPU_RNG_SIZE
 	sub	r4, r4, #1

 	set_region_nr r0, r4
 	isb

 	ldr	r0, [r3, #MPU_RGN_DRBAR]
 	ldr	r6, [r3, #MPU_RGN_DRSR]
 	ldr	r5, [r3, #MPU_RGN_DRACR]

 	setup_region r0, r5, r6, PMSAv7_DATA_SIDE
 	beq	2f
 	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE
 2:	isb

 	mrc	p15, 0, r0, c0, c0, 4		@ Reevaluate the MPUIR
 	cmp	r4, #0
 	bgt	1b

 	ret	lr
 ENDPROC(__secondary_setup_pmsa_v7)

 ENTRY(__secondary_setup_pmsa_v8)
 	ldr	r4, [r6, #MPU_RNG_INFO_USED]
 #ifndef CONFIG_XIP_KERNEL
 	add	r4, r4, #1
 #endif
 	mov	r5, #MPU_RNG_SIZE
 	add	r3, r6, #MPU_RNG_INFO_RNGS
 	mla	r3, r4, r5, r3

 1:
 	sub	r3, r3, #MPU_RNG_SIZE
 	sub	r4, r4, #1

 	mcr	p15, 0, r4, c6, c2, 1		@ PRSEL
 	isb

 	ldr	r5, [r3, #MPU_RGN_PRBAR]
 	ldr	r6, [r3, #MPU_RGN_PRLAR]

 	mcr	p15, 0, r5, c6, c3, 0		@ PRBAR
 	mcr	p15, 0, r6, c6, c3, 1           @ PRLAR

 	cmp	r4, #0
 	bgt	1b

 	ret	lr
 ENDPROC(__secondary_setup_pmsa_v8)
 #endif /* CONFIG_SMP */
 #endif /* CONFIG_ARM_MPU */
 #include "head-common.S"
	/* SPDX-License-Identifier: GPL-2.0-only */
	/*
	* linux/arch/arm/kernel/head-nommu.S
	*
	* Copyright (C) 1994-2002 Russell King
	* Copyright (C) 2003-2006 Hyok S. Choi
	*
	* Common kernel startup code (non-paged MM)
	*/
	#include <linux/linkage.h>
	#include <linux/init.h>
	#include <linux/errno.h>

	#include <asm/assembler.h>
	#include <asm/ptrace.h>
	#include <asm/asm-offsets.h>
	#include <asm/memory.h>
	#include <asm/cp15.h>
	#include <asm/thread_info.h>
	#include <asm/v7m.h>
	#include <asm/mpu.h>
	#include <asm/page.h>

	/*
	* Kernel startup entry point.
	* ---------------------------
	*
	* This is normally called from the decompressor code. The requirements
	* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
	* r1 = machine nr.
	*
	* See linux/arch/arm/tools/mach-types for the complete list of machine
	* numbers for r1.
	*
	*/

	__HEAD

	#ifdef CONFIG_CPU_THUMBONLY
	.thumb
	ENTRY(stext)
	#else
	.arm
	ENTRY(stext)

	THUMB( badr r9, 1f ) @ Kernel is always entered in ARM.
	THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
	THUMB( .thumb ) @ switch to Thumb now.
	THUMB(1: )
	#endif

	#ifdef CONFIG_ARM_VIRT_EXT
	bl __hyp_stub_install
	#endif
	@ ensure svc mode and all interrupts masked
	safe_svcmode_maskall r9
	@ and irqs disabled
	#if defined(CONFIG_CPU_CP15)
	mrc p15, 0, r9, c0, c0 @ get processor id
	#elif defined(CONFIG_CPU_V7M)
	ldr r9, =BASEADDR_V7M_SCB
	ldr r9, [r9, V7M_SCB_CPUID]
	#else
	ldr r9, =CONFIG_PROCESSOR_ID
	#endif
	bl __lookup_processor_type @ r5=procinfo r9=cpuid
	movs r10, r5 @ invalid processor (r5=0)?
	beq __error_p @ yes, error 'p'

	#ifdef CONFIG_ARM_MPU
	bl __setup_mpu
	#endif

	badr lr, 1f @ return (PIC) address
	ldr r12, [r10, #PROCINFO_INITFUNC]
	add r12, r12, r10
	ret r12
	1: ldr lr, =__mmap_switched
	b __after_proc_init
	ENDPROC(stext)

	#ifdef CONFIG_SMP
	.text
	ENTRY(secondary_startup)
	/*
	* Common entry point for secondary CPUs.
	*
	* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
	* the processor type - there is no need to check the machine type
	* as it has already been validated by the primary processor.
	*/
	#ifdef CONFIG_ARM_VIRT_EXT
	bl __hyp_stub_install_secondary
	#endif
	safe_svcmode_maskall r9

	#ifndef CONFIG_CPU_CP15
	ldr r9, =CONFIG_PROCESSOR_ID
	#else
	mrc p15, 0, r9, c0, c0 @ get processor id
	#endif
	bl __lookup_processor_type @ r5=procinfo r9=cpuid
	movs r10, r5 @ invalid processor?
	beq __error_p @ yes, error 'p'

	ldr r7, __secondary_data

	#ifdef CONFIG_ARM_MPU
	bl __secondary_setup_mpu @ Initialize the MPU
	#endif

	badr lr, 1f @ return (PIC) address
	ldr r12, [r10, #PROCINFO_INITFUNC]
	add r12, r12, r10
	ret r12
	1: bl __after_proc_init
	ldr sp, [r7, #12] @ set up the stack pointer
	mov fp, #0
	b secondary_start_kernel
	ENDPROC(secondary_startup)

	.type __secondary_data, %object
	__secondary_data:
	.long secondary_data
	#endif /* CONFIG_SMP */

	/*
	* Set the Control Register and Read the process ID.
	*/
	.text
	__after_proc_init:
	M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
	M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)
	#ifdef CONFIG_ARM_MPU
	M_CLASS(ldr r3, [r12, 0x50])
	AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0
	and r3, r3, #(MMFR0_PMSA) @ PMSA field
	teq r3, #(MMFR0_PMSAv7) @ PMSA v7
	beq 1f
	teq r3, #(MMFR0_PMSAv8) @ PMSA v8
	/*
	* Memory region attributes for PMSAv8:
	*
	* n = AttrIndx[2:0]
	* n MAIR
	* DEVICE_nGnRnE 000 00000000
	* NORMAL 001 11111111
	*/
	ldreq r3, =PMSAv8_MAIR(0x00, PMSAv8_RGN_DEVICE_nGnRnE) \| \
	PMSAv8_MAIR(0xff, PMSAv8_RGN_NORMAL)
	AR_CLASS(mcreq p15, 0, r3, c10, c2, 0) @ MAIR 0
	M_CLASS(streq r3, [r12, #PMSAv8_MAIR0])
	moveq r3, #0
	AR_CLASS(mcreq p15, 0, r3, c10, c2, 1) @ MAIR 1
	M_CLASS(streq r3, [r12, #PMSAv8_MAIR1])

	1:
	#endif
	#ifdef CONFIG_CPU_CP15
	/*
	* CP15 system control register value returned in r0 from
	* the CPU init function.
	*/

	#ifdef CONFIG_ARM_MPU
	biceq r0, r0, #CR_BR @ Disable the 'default mem-map'
	orreq r0, r0, #CR_M @ Set SCTRL.M (MPU on)
	#endif
	#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
	orr r0, r0, #CR_A
	#else
	bic r0, r0, #CR_A
	#endif
	#ifdef CONFIG_CPU_DCACHE_DISABLE
	bic r0, r0, #CR_C
	#endif
	#ifdef CONFIG_CPU_BPREDICT_DISABLE
	bic r0, r0, #CR_Z
	#endif
	#ifdef CONFIG_CPU_ICACHE_DISABLE
	bic r0, r0, #CR_I
	#endif
	mcr p15, 0, r0, c1, c0, 0 @ write control reg
	instr_sync
	#elif defined (CONFIG_CPU_V7M)
	#ifdef CONFIG_ARM_MPU
	ldreq r3, [r12, MPU_CTRL]
	biceq r3, #MPU_CTRL_PRIVDEFENA
	orreq r3, #MPU_CTRL_ENABLE
	streq r3, [r12, MPU_CTRL]
	isb
	#endif
	/* For V7M systems we want to modify the CCR similarly to the SCTLR */
	#ifdef CONFIG_CPU_DCACHE_DISABLE
	bic r0, r0, #V7M_SCB_CCR_DC
	#endif
	#ifdef CONFIG_CPU_BPREDICT_DISABLE
	bic r0, r0, #V7M_SCB_CCR_BP
	#endif
	#ifdef CONFIG_CPU_ICACHE_DISABLE
	bic r0, r0, #V7M_SCB_CCR_IC
	#endif
	str r0, [r12, V7M_SCB_CCR]
	/* Pass exc_ret to __mmap_switched */
	mov r0, r10
	#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
	ret lr
	ENDPROC(__after_proc_init)
	.ltorg

	#ifdef CONFIG_ARM_MPU


	#ifndef CONFIG_CPU_V7M
	/* Set which MPU region should be programmed */
	.macro set_region_nr tmp, rgnr, unused
	mov \tmp, \rgnr @ Use static region numbers
	mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR
	.endm

	/* Setup a single MPU region, either D or I side (D-side for unified) */
	.macro setup_region bar, acr, sr, side = PMSAv7_DATA_SIDE, unused
	mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR
	mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR
	mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR
	.endm
	#else
	.macro set_region_nr tmp, rgnr, base
	mov \tmp, \rgnr
	str \tmp, [\base, #PMSAv7_RNR]
	.endm

	.macro setup_region bar, acr, sr, unused, base
	lsl \acr, \acr, #16
	orr \acr, \acr, \sr
	str \bar, [\base, #PMSAv7_RBAR]
	str \acr, [\base, #PMSAv7_RASR]
	.endm

	#endif
	/*
	* Setup the MPU and initial MPU Regions. We create the following regions:
	* Region 0: Use this for probing the MPU details, so leave disabled.
	* Region 1: Background region - covers the whole of RAM as strongly ordered
	* Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
	* Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
	*
	* r6: Value to be written to DRSR (and IRSR if required) for PMSAv7_RAM_REGION
	*/
	__HEAD

	ENTRY(__setup_mpu)

	/* Probe for v7 PMSA compliance */
	M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
	M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)

	AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0
	M_CLASS(ldr r0, [r12, 0x50])
	and r0, r0, #(MMFR0_PMSA) @ PMSA field
	teq r0, #(MMFR0_PMSAv7) @ PMSA v7
	beq __setup_pmsa_v7
	teq r0, #(MMFR0_PMSAv8) @ PMSA v8
	beq __setup_pmsa_v8

	ret lr
	ENDPROC(__setup_mpu)

	ENTRY(__setup_pmsa_v7)
	/* Calculate the size of a region covering just the kernel */
	ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET
	ldr r6, =(_end) @ Cover whole kernel
	sub r6, r6, r5 @ Minimum size of region to map
	clz r6, r6 @ Region size must be 2^N...
	rsb r6, r6, #31 @ ...so round up region size
	lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field
	orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit

	/* Determine whether the D/I-side memory map is unified. We set the
	* flags here and continue to use them for the rest of this function */
	AR_CLASS(mrc p15, 0, r0, c0, c0, 4) @ MPUIR
	M_CLASS(ldr r0, [r12, #MPU_TYPE])
	ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
	bxeq lr
	tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified

	/* Setup second region first to free up r6 */
	set_region_nr r0, #PMSAv7_RAM_REGION, r12
	isb
	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
	ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET
	ldr r5,=(PMSAv7_AP_PL1RW_PL0RW \| PMSAv7_RGN_NORMAL)

	setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled
	beq 1f @ Memory-map not unified
	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled
	1: isb

	/* First/background region */
	set_region_nr r0, #PMSAv7_BG_REGION, r12
	isb
	/* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */
	mov r0, #0 @ BG region starts at 0x0
	ldr r5,=(PMSAv7_ACR_XN \| PMSAv7_RGN_STRONGLY_ORDERED \| PMSAv7_AP_PL1RW_PL0NA)
	mov r6, #PMSAv7_RSR_ALL_MEM @ 4GB region, enabled

	setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ 0x0, BG region, enabled
	beq 2f @ Memory-map not unified
	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE r12 @ 0x0, BG region, enabled
	2: isb

	#ifdef CONFIG_XIP_KERNEL
	set_region_nr r0, #PMSAv7_ROM_REGION, r12
	isb

	ldr r5,=(PMSAv7_AP_PL1RO_PL0NA \| PMSAv7_RGN_NORMAL)

	ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start
	ldr r6, =(_exiprom) @ ROM end
	sub r6, r6, r0 @ Minimum size of region to map
	clz r6, r6 @ Region size must be 2^N...
	rsb r6, r6, #31 @ ...so round up region size
	lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field
	orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit

	setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
	beq 3f @ Memory-map not unified
	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
	3: isb
	#endif
	ret lr
	ENDPROC(__setup_pmsa_v7)

	ENTRY(__setup_pmsa_v8)
	mov r0, #0
	AR_CLASS(mcr p15, 0, r0, c6, c2, 1) @ PRSEL
	M_CLASS(str r0, [r12, #PMSAv8_RNR])
	isb

	#ifdef CONFIG_XIP_KERNEL
	ldr r5, =CONFIG_XIP_PHYS_ADDR @ ROM start
	ldr r6, =(_exiprom) @ ROM end
	sub r6, r6, #1
	bic r6, r6, #(PMSAv8_MINALIGN - 1)

	orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA \| PMSAv8_RGN_SHARED)
	orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) \| PMSAv8_LAR_EN)

	AR_CLASS(mcr p15, 0, r5, c6, c8, 0) @ PRBAR0
	AR_CLASS(mcr p15, 0, r6, c6, c8, 1) @ PRLAR0
	M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(0)])
	M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(0)])
	#endif

	ldr r5, =KERNEL_START
	ldr r6, =KERNEL_END
	sub r6, r6, #1
	bic r6, r6, #(PMSAv8_MINALIGN - 1)

	orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA \| PMSAv8_RGN_SHARED)
	orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) \| PMSAv8_LAR_EN)

	AR_CLASS(mcr p15, 0, r5, c6, c8, 4) @ PRBAR1
	AR_CLASS(mcr p15, 0, r6, c6, c8, 5) @ PRLAR1
	M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(1)])
	M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(1)])

	/* Setup Background: 0x0 - min(KERNEL_START, XIP_PHYS_ADDR) */
	#ifdef CONFIG_XIP_KERNEL
	ldr r6, =KERNEL_START
	ldr r5, =CONFIG_XIP_PHYS_ADDR
	cmp r6, r5
	movcs r6, r5
	#else
	ldr r6, =KERNEL_START
	#endif
	cmp r6, #0
	beq 1f

	mov r5, #0
	sub r6, r6, #1
	bic r6, r6, #(PMSAv8_MINALIGN - 1)

	orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA \| PMSAv8_RGN_SHARED \| PMSAv8_BAR_XN)
	orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) \| PMSAv8_LAR_EN)

	AR_CLASS(mcr p15, 0, r5, c6, c9, 0) @ PRBAR2
	AR_CLASS(mcr p15, 0, r6, c6, c9, 1) @ PRLAR2
	M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(2)])
	M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(2)])

	1:
	/* Setup Background: max(KERNEL_END, _exiprom) - 0xffffffff */
	#ifdef CONFIG_XIP_KERNEL
	ldr r5, =KERNEL_END
	ldr r6, =(_exiprom)
	cmp r5, r6
	movcc r5, r6
	#else
	ldr r5, =KERNEL_END
	#endif
	mov r6, #0xffffffff
	bic r6, r6, #(PMSAv8_MINALIGN - 1)

	orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA \| PMSAv8_RGN_SHARED \| PMSAv8_BAR_XN)
	orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) \| PMSAv8_LAR_EN)

	AR_CLASS(mcr p15, 0, r5, c6, c9, 4) @ PRBAR3
	AR_CLASS(mcr p15, 0, r6, c6, c9, 5) @ PRLAR3
	M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(3)])
	M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(3)])

	#ifdef CONFIG_XIP_KERNEL
	/* Setup Background: min(_exiprom, KERNEL_END) - max(KERNEL_START, XIP_PHYS_ADDR) */
	ldr r5, =(_exiprom)
	ldr r6, =KERNEL_END
	cmp r5, r6
	movcs r5, r6

	ldr r6, =KERNEL_START
	ldr r0, =CONFIG_XIP_PHYS_ADDR
	cmp r6, r0
	movcc r6, r0

	sub r6, r6, #1
	bic r6, r6, #(PMSAv8_MINALIGN - 1)

	orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA \| PMSAv8_RGN_SHARED \| PMSAv8_BAR_XN)
	orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) \| PMSAv8_LAR_EN)

	#ifdef CONFIG_CPU_V7M
	/* There is no alias for n == 4 */
	mov r0, #4
	str r0, [r12, #PMSAv8_RNR] @ PRSEL
	isb

	str r5, [r12, #PMSAv8_RBAR_A(0)]
	str r6, [r12, #PMSAv8_RLAR_A(0)]
	#else
	mcr p15, 0, r5, c6, c10, 0 @ PRBAR4
	mcr p15, 0, r6, c6, c10, 1 @ PRLAR4
	#endif
	#endif
	ret lr
	ENDPROC(__setup_pmsa_v8)

	#ifdef CONFIG_SMP
	/*
	* r6: pointer at mpu_rgn_info
	*/

	.text
	ENTRY(__secondary_setup_mpu)
	/* Use MPU region info supplied by __cpu_up */
	ldr r6, [r7] @ get secondary_data.mpu_rgn_info

	/* Probe for v7 PMSA compliance */
	mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
	and r0, r0, #(MMFR0_PMSA) @ PMSA field
	teq r0, #(MMFR0_PMSAv7) @ PMSA v7
	beq __secondary_setup_pmsa_v7
	teq r0, #(MMFR0_PMSAv8) @ PMSA v8
	beq __secondary_setup_pmsa_v8
	b __error_p
	ENDPROC(__secondary_setup_mpu)

	/*
	* r6: pointer at mpu_rgn_info
	*/
	ENTRY(__secondary_setup_pmsa_v7)
	/* Determine whether the D/I-side memory map is unified. We set the
	* flags here and continue to use them for the rest of this function */
	mrc p15, 0, r0, c0, c0, 4 @ MPUIR
	ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
	beq __error_p

	ldr r4, [r6, #MPU_RNG_INFO_USED]
	mov r5, #MPU_RNG_SIZE
	add r3, r6, #MPU_RNG_INFO_RNGS
	mla r3, r4, r5, r3

	1:
	tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
	sub r3, r3, #MPU_RNG_SIZE
	sub r4, r4, #1

	set_region_nr r0, r4
	isb

	ldr r0, [r3, #MPU_RGN_DRBAR]
	ldr r6, [r3, #MPU_RGN_DRSR]
	ldr r5, [r3, #MPU_RGN_DRACR]

	setup_region r0, r5, r6, PMSAv7_DATA_SIDE
	beq 2f
	setup_region r0, r5, r6, PMSAv7_INSTR_SIDE
	2: isb

	mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR
	cmp r4, #0
	bgt 1b

	ret lr
	ENDPROC(__secondary_setup_pmsa_v7)

	ENTRY(__secondary_setup_pmsa_v8)
	ldr r4, [r6, #MPU_RNG_INFO_USED]
	#ifndef CONFIG_XIP_KERNEL
	add r4, r4, #1
	#endif
	mov r5, #MPU_RNG_SIZE
	add r3, r6, #MPU_RNG_INFO_RNGS
	mla r3, r4, r5, r3

	1:
	sub r3, r3, #MPU_RNG_SIZE
	sub r4, r4, #1

	mcr p15, 0, r4, c6, c2, 1 @ PRSEL
	isb

	ldr r5, [r3, #MPU_RGN_PRBAR]
	ldr r6, [r3, #MPU_RGN_PRLAR]

	mcr p15, 0, r5, c6, c3, 0 @ PRBAR
	mcr p15, 0, r6, c6, c3, 1 @ PRLAR

	cmp r4, #0
	bgt 1b

	ret lr
	ENDPROC(__secondary_setup_pmsa_v8)
	#endif /* CONFIG_SMP */
	#endif /* CONFIG_ARM_MPU */
	#include "head-common.S"