| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Device Tree Source for the iWave-RZG1M-20M Qseven SOM | 
 |  * | 
 |  * Copyright (C) 2017 Renesas Electronics Corp. | 
 |  */ | 
 |  | 
 | #include "r8a7743.dtsi" | 
 | #include <dt-bindings/gpio/gpio.h> | 
 |  | 
 | / { | 
 | 	compatible = "iwave,g20m", "renesas,r8a7743"; | 
 |  | 
 | 	memory@40000000 { | 
 | 		device_type = "memory"; | 
 | 		reg = <0 0x40000000 0 0x20000000>; | 
 | 	}; | 
 |  | 
 | 	memory@200000000 { | 
 | 		device_type = "memory"; | 
 | 		reg = <2 0x00000000 0 0x20000000>; | 
 | 	}; | 
 |  | 
 | 	reg_3p3v: 3p3v { | 
 | 		compatible = "regulator-fixed"; | 
 | 		regulator-name = "3P3V"; | 
 | 		regulator-min-microvolt = <3300000>; | 
 | 		regulator-max-microvolt = <3300000>; | 
 | 		regulator-always-on; | 
 | 		regulator-boot-on; | 
 | 	}; | 
 | }; | 
 |  | 
 | &extal_clk { | 
 | 	clock-frequency = <20000000>; | 
 | }; | 
 |  | 
 | &pfc { | 
 | 	mmcif0_pins: mmc { | 
 | 		groups = "mmc_data8_b", "mmc_ctrl"; | 
 | 		function = "mmc"; | 
 | 	}; | 
 |  | 
 | 	qspi_pins: qspi { | 
 | 		groups = "qspi_ctrl", "qspi_data2"; | 
 | 		function = "qspi"; | 
 | 	}; | 
 |  | 
 | 	sdhi0_pins: sd0 { | 
 | 		groups = "sdhi0_data4", "sdhi0_ctrl"; | 
 | 		function = "sdhi0"; | 
 | 		power-source = <3300>; | 
 | 	}; | 
 | }; | 
 |  | 
 | &mmcif0 { | 
 | 	pinctrl-0 = <&mmcif0_pins>; | 
 | 	pinctrl-names = "default"; | 
 |  | 
 | 	vmmc-supply = <®_3p3v>; | 
 | 	bus-width = <8>; | 
 | 	non-removable; | 
 | 	status = "okay"; | 
 | }; | 
 |  | 
 | &qspi { | 
 | 	pinctrl-0 = <&qspi_pins>; | 
 | 	pinctrl-names = "default"; | 
 |  | 
 | 	status = "okay"; | 
 |  | 
 | 	/* WARNING - This device contains the bootloader. Handle with care. */ | 
 | 	flash: flash@0 { | 
 | 		#address-cells = <1>; | 
 | 		#size-cells = <1>; | 
 | 		compatible = "sst,sst25vf016b", "jedec,spi-nor"; | 
 | 		reg = <0>; | 
 | 		spi-max-frequency = <50000000>; | 
 | 		spi-tx-bus-width = <1>; | 
 | 		spi-rx-bus-width = <1>; | 
 | 		m25p,fast-read; | 
 | 		spi-cpol; | 
 | 		spi-cpha; | 
 | 	}; | 
 | }; | 
 |  | 
 | &sdhi0 { | 
 | 	pinctrl-0 = <&sdhi0_pins>; | 
 | 	pinctrl-names = "default"; | 
 |  | 
 | 	vmmc-supply = <®_3p3v>; | 
 | 	vqmmc-supply = <®_3p3v>; | 
 | 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; | 
 | 	status = "okay"; | 
 | }; |