|  | /* | 
|  | * Marvell Orion SoC timer handling. | 
|  | * | 
|  | * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public | 
|  | * License version 2.  This program is licensed "as is" without any | 
|  | * warranty of any kind, whether express or implied. | 
|  | * | 
|  | * Timer 0 is used as free-running clocksource, while timer 1 is | 
|  | * used as clock_event_device. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/clockchips.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/sched_clock.h> | 
|  |  | 
|  | #define TIMER_CTRL		0x00 | 
|  | #define  TIMER0_EN		BIT(0) | 
|  | #define  TIMER0_RELOAD_EN	BIT(1) | 
|  | #define  TIMER1_EN		BIT(2) | 
|  | #define  TIMER1_RELOAD_EN	BIT(3) | 
|  | #define TIMER0_RELOAD		0x10 | 
|  | #define TIMER0_VAL		0x14 | 
|  | #define TIMER1_RELOAD		0x18 | 
|  | #define TIMER1_VAL		0x1c | 
|  |  | 
|  | #define ORION_ONESHOT_MIN	1 | 
|  | #define ORION_ONESHOT_MAX	0xfffffffe | 
|  |  | 
|  | static void __iomem *timer_base; | 
|  |  | 
|  | static unsigned long notrace orion_read_timer(void) | 
|  | { | 
|  | return ~readl(timer_base + TIMER0_VAL); | 
|  | } | 
|  |  | 
|  | static struct delay_timer orion_delay_timer = { | 
|  | .read_current_timer = orion_read_timer, | 
|  | }; | 
|  |  | 
|  | static void orion_delay_timer_init(unsigned long rate) | 
|  | { | 
|  | orion_delay_timer.freq = rate; | 
|  | register_current_timer_delay(&orion_delay_timer); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Free-running clocksource handling. | 
|  | */ | 
|  | static u64 notrace orion_read_sched_clock(void) | 
|  | { | 
|  | return ~readl(timer_base + TIMER0_VAL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Clockevent handling. | 
|  | */ | 
|  | static u32 ticks_per_jiffy; | 
|  |  | 
|  | static int orion_clkevt_next_event(unsigned long delta, | 
|  | struct clock_event_device *dev) | 
|  | { | 
|  | /* setup and enable one-shot timer */ | 
|  | writel(delta, timer_base + TIMER1_VAL); | 
|  | atomic_io_modify(timer_base + TIMER_CTRL, | 
|  | TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int orion_clkevt_shutdown(struct clock_event_device *dev) | 
|  | { | 
|  | /* disable timer */ | 
|  | atomic_io_modify(timer_base + TIMER_CTRL, | 
|  | TIMER1_RELOAD_EN | TIMER1_EN, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int orion_clkevt_set_periodic(struct clock_event_device *dev) | 
|  | { | 
|  | /* setup and enable periodic timer at 1/HZ intervals */ | 
|  | writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD); | 
|  | writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL); | 
|  | atomic_io_modify(timer_base + TIMER_CTRL, | 
|  | TIMER1_RELOAD_EN | TIMER1_EN, | 
|  | TIMER1_RELOAD_EN | TIMER1_EN); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct clock_event_device orion_clkevt = { | 
|  | .name			= "orion_event", | 
|  | .features		= CLOCK_EVT_FEAT_ONESHOT | | 
|  | CLOCK_EVT_FEAT_PERIODIC, | 
|  | .shift			= 32, | 
|  | .rating			= 300, | 
|  | .set_next_event		= orion_clkevt_next_event, | 
|  | .set_state_shutdown	= orion_clkevt_shutdown, | 
|  | .set_state_periodic	= orion_clkevt_set_periodic, | 
|  | .set_state_oneshot	= orion_clkevt_shutdown, | 
|  | .tick_resume		= orion_clkevt_shutdown, | 
|  | }; | 
|  |  | 
|  | static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id) | 
|  | { | 
|  | orion_clkevt.event_handler(&orion_clkevt); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int __init orion_timer_init(struct device_node *np) | 
|  | { | 
|  | unsigned long rate; | 
|  | struct clk *clk; | 
|  | int irq, ret; | 
|  |  | 
|  | /* timer registers are shared with watchdog timer */ | 
|  | timer_base = of_iomap(np, 0); | 
|  | if (!timer_base) { | 
|  | pr_err("%pOFn: unable to map resource\n", np); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | clk = of_clk_get(np, 0); | 
|  | if (IS_ERR(clk)) { | 
|  | pr_err("%pOFn: unable to get clk\n", np); | 
|  | return PTR_ERR(clk); | 
|  | } | 
|  |  | 
|  | ret = clk_prepare_enable(clk); | 
|  | if (ret) { | 
|  | pr_err("Failed to prepare clock\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* we are only interested in timer1 irq */ | 
|  | irq = irq_of_parse_and_map(np, 1); | 
|  | if (irq <= 0) { | 
|  | pr_err("%pOFn: unable to parse timer1 irq\n", np); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | rate = clk_get_rate(clk); | 
|  |  | 
|  | /* setup timer0 as free-running clocksource */ | 
|  | writel(~0, timer_base + TIMER0_VAL); | 
|  | writel(~0, timer_base + TIMER0_RELOAD); | 
|  | atomic_io_modify(timer_base + TIMER_CTRL, | 
|  | TIMER0_RELOAD_EN | TIMER0_EN, | 
|  | TIMER0_RELOAD_EN | TIMER0_EN); | 
|  |  | 
|  | ret = clocksource_mmio_init(timer_base + TIMER0_VAL, | 
|  | "orion_clocksource", rate, 300, 32, | 
|  | clocksource_mmio_readl_down); | 
|  | if (ret) { | 
|  | pr_err("Failed to initialize mmio timer\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | sched_clock_register(orion_read_sched_clock, 32, rate); | 
|  |  | 
|  | /* setup timer1 as clockevent timer */ | 
|  | ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER, | 
|  | "orion_event", NULL); | 
|  | if (ret) { | 
|  | pr_err("%pOFn: unable to setup irq\n", np); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ticks_per_jiffy = (clk_get_rate(clk) + HZ/2) / HZ; | 
|  | orion_clkevt.cpumask = cpumask_of(0); | 
|  | orion_clkevt.irq = irq; | 
|  | clockevents_config_and_register(&orion_clkevt, rate, | 
|  | ORION_ONESHOT_MIN, ORION_ONESHOT_MAX); | 
|  |  | 
|  |  | 
|  | orion_delay_timer_init(rate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | TIMER_OF_DECLARE(orion_timer, "marvell,orion-timer", orion_timer_init); |