| * MELFAS MIP4 Touchscreen | |
| Required properties: | |
| - compatible: must be "melfas,mip4_ts" | |
| - reg: I2C slave address of the chip (0x48 or 0x34) | |
| - interrupts: interrupt to which the chip is connected | |
| Optional properties: | |
| - ce-gpios: GPIO connected to the CE (chip enable) pin of the chip | |
| Example: | |
| i2c@00000000 { | |
| touchscreen: melfas_mip4@48 { | |
| compatible = "melfas,mip4_ts"; | |
| reg = <0x48>; | |
| interrupt-parent = <&gpio>; | |
| interrupts = <0 IRQ_TYPE_EDGE_FALLING>; | |
| ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; | |
| }; | |
| }; |