arch/powerpc/boot/dts/mpc885ads.dts

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * MPC885 ADS Device Tree Source
 *
 * Copyright 2006 MontaVista Software, Inc.
 * Copyright 2007,2008 Freescale Semiconductor, Inc.
 */

/dts-v1/;

/ {
	model = "MPC885ADS";
	compatible = "fsl,mpc885ads";
	#address-cells = <1>;
	#size-cells = <1>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,885@0 {
			device_type = "cpu";
			reg = <0x0>;
			d-cache-line-size = <16>;
			i-cache-line-size = <16>;
			d-cache-size = <8192>;
			i-cache-size = <8192>;
			timebase-frequency = <0>;
			bus-frequency = <0>;
			clock-frequency = <0>;
			interrupts = <15 2>;	// decrementer interrupt
			interrupt-parent = <&PIC>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x0 0x0>;
	};

	localbus@ff000100 {
		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
		#address-cells = <2>;
		#size-cells = <1>;
		reg = <0xff000100 0x40>;

		ranges = <
			0x0 0x0 0xfe000000 0x800000
			0x1 0x0 0xff080000 0x8000
			0x5 0x0 0xff0a0000 0x8000
		>;

		flash@0,0 {
			compatible = "jedec-flash";
			reg = <0x0 0x0 0x800000>;
			bank-width = <4>;
			device-width = <1>;
		};

		board-control@1,0 {
			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
			compatible = "fsl,mpc885ads-bcsr";
		};
	};

	soc@ff000000 {
		compatible = "fsl,mpc885", "fsl,pq1-soc";
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		ranges = <0x0 0xff000000 0x28000>;
		bus-frequency = <0>;

		// Temporary -- will go away once kernel uses ranges for get_immrbase().
		reg = <0xff000000 0x4000>;

		mdio@e00 {
			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
			reg = <0xe00 0x188>;
			#address-cells = <1>;
			#size-cells = <0>;

			PHY0: ethernet-phy@0 {
				reg = <0x0>;
			};

			PHY1: ethernet-phy@1 {
				reg = <0x1>;
			};

			PHY2: ethernet-phy@2 {
				reg = <0x2>;
			};
		};

		ethernet@e00 {
			device_type = "network";
			compatible = "fsl,mpc885-fec-enet",
			             "fsl,pq1-fec-enet";
			reg = <0xe00 0x188>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <3 1>;
			interrupt-parent = <&PIC>;
			phy-handle = <&PHY0>;
			linux,network-index = <0>;
		};

		ethernet@1e00 {
			device_type = "network";
			compatible = "fsl,mpc885-fec-enet",
			             "fsl,pq1-fec-enet";
			reg = <0x1e00 0x188>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <7 1>;
			interrupt-parent = <&PIC>;
			phy-handle = <&PHY1>;
			linux,network-index = <1>;
		};

		PIC: interrupt-controller@0 {
			interrupt-controller;
			#interrupt-cells = <2>;
			reg = <0x0 0x24>;
			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
		};

		pcmcia@80 {
			#address-cells = <3>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			compatible = "fsl,pq-pcmcia";
			device_type = "pcmcia";
			reg = <0x80 0x80>;
			interrupt-parent = <&PIC>;
			interrupts = <13 1>;
		};

		cpm@9c0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
			command-proc = <0x9c0>;
			interrupts = <0>;	// cpm error interrupt
			interrupt-parent = <&CPM_PIC>;
			reg = <0x9c0 0x40>;
			ranges;

			muram@2000 {
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0x0 0x2000 0x2000>;

				data@0 {
					compatible = "fsl,cpm-muram-data";
					reg = <0x0 0x1c00>;
				};
			};

			brg@9f0 {
				compatible = "fsl,mpc885-brg",
				             "fsl,cpm1-brg",
				             "fsl,cpm-brg";
				clock-frequency = <0>;
				reg = <0x9f0 0x10>;
			};

			CPM_PIC: interrupt-controller@930 {
				interrupt-controller;
				#interrupt-cells = <1>;
				interrupts = <5 2 0 2>;
				interrupt-parent = <&PIC>;
				reg = <0x930 0x20>;
				compatible = "fsl,mpc885-cpm-pic",
				             "fsl,cpm1-pic";
			};

			serial@a80 {
				device_type = "serial";
				compatible = "fsl,mpc885-smc-uart",
				             "fsl,cpm1-smc-uart";
				reg = <0xa80 0x10 0x3e80 0x40>;
				interrupts = <4>;
				interrupt-parent = <&CPM_PIC>;
				fsl,cpm-brg = <1>;
				fsl,cpm-command = <0x90>;
			};

			serial@a90 {
				device_type = "serial";
				compatible = "fsl,mpc885-smc-uart",
				             "fsl,cpm1-smc-uart";
				reg = <0xa90 0x10 0x3f80 0x40>;
				interrupts = <3>;
				interrupt-parent = <&CPM_PIC>;
				fsl,cpm-brg = <2>;
				fsl,cpm-command = <0xd0>;
			};

			ethernet@a40 {
				device_type = "network";
				compatible = "fsl,mpc885-scc-enet",
				             "fsl,cpm1-scc-enet";
				reg = <0xa40 0x18 0x3e00 0x100>;
				local-mac-address = [ 00 00 00 00 00 00 ];
				interrupts = <28>;
				interrupt-parent = <&CPM_PIC>;
				phy-handle = <&PHY2>;
				fsl,cpm-command = <0x80>;
				linux,network-index = <2>;
			};

			i2c@860 {
				compatible = "fsl,mpc885-i2c",
					     "fsl,cpm1-i2c";
				reg = <0x860 0x20 0x3c80 0x30>;
				interrupts = <16>;
				interrupt-parent = <&CPM_PIC>;
				fsl,cpm-command = <0x10>;
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		crypto@20000 {
			compatible = "fsl,sec1.2", "fsl,sec1.0";
			reg = <0x20000 0x8000>;
			interrupts = <1 1>;
			interrupt-parent = <&PIC>;
			fsl,num-channels = <1>;
			fsl,channel-fifo-len = <24>;
			fsl,exec-units-mask = <0x4c>;
			fsl,descriptor-types-mask = <0x05000154>;
		};
	};

	chosen {
		stdout-path = "/soc/cpm/serial@a80";
	};
};