|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Signal handling for 32bit PPC and 32bit tasks on 64bit PPC | 
|  | * | 
|  | *  PowerPC version | 
|  | *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | 
|  | * Copyright (C) 2001 IBM | 
|  | * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) | 
|  | * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) | 
|  | * | 
|  | *  Derived from "arch/i386/kernel/signal.c" | 
|  | *    Copyright (C) 1991, 1992 Linus Torvalds | 
|  | *    1997-11-28  Modified for POSIX.1b signals by Richard Henderson | 
|  | */ | 
|  |  | 
|  | #include <linux/sched.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/signal.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/elf.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/ratelimit.h> | 
|  | #include <linux/syscalls.h> | 
|  | #ifdef CONFIG_PPC64 | 
|  | #include <linux/compat.h> | 
|  | #else | 
|  | #include <linux/wait.h> | 
|  | #include <linux/unistd.h> | 
|  | #include <linux/stddef.h> | 
|  | #include <linux/tty.h> | 
|  | #include <linux/binfmts.h> | 
|  | #endif | 
|  |  | 
|  | #include <linux/uaccess.h> | 
|  | #include <asm/cacheflush.h> | 
|  | #include <asm/syscalls.h> | 
|  | #include <asm/sigcontext.h> | 
|  | #include <asm/vdso.h> | 
|  | #include <asm/switch_to.h> | 
|  | #include <asm/tm.h> | 
|  | #include <asm/asm-prototypes.h> | 
|  | #ifdef CONFIG_PPC64 | 
|  | #include "ppc32.h" | 
|  | #include <asm/unistd.h> | 
|  | #else | 
|  | #include <asm/ucontext.h> | 
|  | #endif | 
|  |  | 
|  | #include "signal.h" | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | #define old_sigaction	old_sigaction32 | 
|  | #define sigcontext	sigcontext32 | 
|  | #define mcontext	mcontext32 | 
|  | #define ucontext	ucontext32 | 
|  |  | 
|  | #define __save_altstack __compat_save_altstack | 
|  |  | 
|  | /* | 
|  | * Userspace code may pass a ucontext which doesn't include VSX added | 
|  | * at the end.  We need to check for this case. | 
|  | */ | 
|  | #define UCONTEXTSIZEWITHOUTVSX \ | 
|  | (sizeof(struct ucontext) - sizeof(elf_vsrreghalf_t32)) | 
|  |  | 
|  | /* | 
|  | * Returning 0 means we return to userspace via | 
|  | * ret_from_except and thus restore all user | 
|  | * registers from *regs.  This is what we need | 
|  | * to do when a signal has been delivered. | 
|  | */ | 
|  |  | 
|  | #define GP_REGS_SIZE	min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32)) | 
|  | #undef __SIGNAL_FRAMESIZE | 
|  | #define __SIGNAL_FRAMESIZE	__SIGNAL_FRAMESIZE32 | 
|  | #undef ELF_NVRREG | 
|  | #define ELF_NVRREG	ELF_NVRREG32 | 
|  |  | 
|  | /* | 
|  | * Functions for flipping sigsets (thanks to brain dead generic | 
|  | * implementation that makes things simple for little endian only) | 
|  | */ | 
|  | static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set) | 
|  | { | 
|  | return put_compat_sigset(uset, set, sizeof(*uset)); | 
|  | } | 
|  |  | 
|  | static inline int get_sigset_t(sigset_t *set, | 
|  | const compat_sigset_t __user *uset) | 
|  | { | 
|  | return get_compat_sigset(set, uset); | 
|  | } | 
|  |  | 
|  | #define to_user_ptr(p)		ptr_to_compat(p) | 
|  | #define from_user_ptr(p)	compat_ptr(p) | 
|  |  | 
|  | static inline int save_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *frame) | 
|  | { | 
|  | elf_greg_t64 *gregs = (elf_greg_t64 *)regs; | 
|  | int i; | 
|  | /* Force usr to alway see softe as 1 (interrupts enabled) */ | 
|  | elf_greg_t64 softe = 0x1; | 
|  |  | 
|  | WARN_ON(!FULL_REGS(regs)); | 
|  |  | 
|  | for (i = 0; i <= PT_RESULT; i ++) { | 
|  | if (i == 14 && !FULL_REGS(regs)) | 
|  | i = 32; | 
|  | if ( i == PT_SOFTE) { | 
|  | if(__put_user((unsigned int)softe, &frame->mc_gregs[i])) | 
|  | return -EFAULT; | 
|  | else | 
|  | continue; | 
|  | } | 
|  | if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i])) | 
|  | return -EFAULT; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline int restore_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *sr) | 
|  | { | 
|  | elf_greg_t64 *gregs = (elf_greg_t64 *)regs; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i <= PT_RESULT; i++) { | 
|  | if ((i == PT_MSR) || (i == PT_SOFTE)) | 
|  | continue; | 
|  | if (__get_user(gregs[i], &sr->mc_gregs[i])) | 
|  | return -EFAULT; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #else /* CONFIG_PPC64 */ | 
|  |  | 
|  | #define GP_REGS_SIZE	min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) | 
|  |  | 
|  | static inline int put_sigset_t(sigset_t __user *uset, sigset_t *set) | 
|  | { | 
|  | return copy_to_user(uset, set, sizeof(*uset)); | 
|  | } | 
|  |  | 
|  | static inline int get_sigset_t(sigset_t *set, const sigset_t __user *uset) | 
|  | { | 
|  | return copy_from_user(set, uset, sizeof(*uset)); | 
|  | } | 
|  |  | 
|  | #define to_user_ptr(p)		((unsigned long)(p)) | 
|  | #define from_user_ptr(p)	((void __user *)(p)) | 
|  |  | 
|  | static inline int save_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *frame) | 
|  | { | 
|  | WARN_ON(!FULL_REGS(regs)); | 
|  | return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE); | 
|  | } | 
|  |  | 
|  | static inline int restore_general_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *sr) | 
|  | { | 
|  | /* copy up to but not including MSR */ | 
|  | if (__copy_from_user(regs, &sr->mc_gregs, | 
|  | PT_MSR * sizeof(elf_greg_t))) | 
|  | return -EFAULT; | 
|  | /* copy from orig_r3 (the word after the MSR) up to the end */ | 
|  | if (__copy_from_user(®s->orig_gpr3, &sr->mc_gregs[PT_ORIG_R3], | 
|  | GP_REGS_SIZE - PT_ORIG_R3 * sizeof(elf_greg_t))) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * When we have signals to deliver, we set up on the | 
|  | * user stack, going down from the original stack pointer: | 
|  | *	an ABI gap of 56 words | 
|  | *	an mcontext struct | 
|  | *	a sigcontext struct | 
|  | *	a gap of __SIGNAL_FRAMESIZE bytes | 
|  | * | 
|  | * Each of these things must be a multiple of 16 bytes in size. The following | 
|  | * structure represent all of this except the __SIGNAL_FRAMESIZE gap | 
|  | * | 
|  | */ | 
|  | struct sigframe { | 
|  | struct sigcontext sctx;		/* the sigcontext */ | 
|  | struct mcontext	mctx;		/* all the register values */ | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | struct sigcontext sctx_transact; | 
|  | struct mcontext	mctx_transact; | 
|  | #endif | 
|  | /* | 
|  | * Programs using the rs6000/xcoff abi can save up to 19 gp | 
|  | * regs and 18 fp regs below sp before decrementing it. | 
|  | */ | 
|  | int			abigap[56]; | 
|  | }; | 
|  |  | 
|  | /* We use the mc_pad field for the signal return trampoline. */ | 
|  | #define tramp	mc_pad | 
|  |  | 
|  | /* | 
|  | *  When we have rt signals to deliver, we set up on the | 
|  | *  user stack, going down from the original stack pointer: | 
|  | *	one rt_sigframe struct (siginfo + ucontext + ABI gap) | 
|  | *	a gap of __SIGNAL_FRAMESIZE+16 bytes | 
|  | *  (the +16 is to get the siginfo and ucontext in the same | 
|  | *  positions as in older kernels). | 
|  | * | 
|  | *  Each of these things must be a multiple of 16 bytes in size. | 
|  | * | 
|  | */ | 
|  | struct rt_sigframe { | 
|  | #ifdef CONFIG_PPC64 | 
|  | compat_siginfo_t info; | 
|  | #else | 
|  | struct siginfo info; | 
|  | #endif | 
|  | struct ucontext	uc; | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | struct ucontext	uc_transact; | 
|  | #endif | 
|  | /* | 
|  | * Programs using the rs6000/xcoff abi can save up to 19 gp | 
|  | * regs and 18 fp regs below sp before decrementing it. | 
|  | */ | 
|  | int			abigap[56]; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Save the current user registers on the user stack. | 
|  | * We only save the altivec/spe registers if the process has used | 
|  | * altivec/spe instructions at some point. | 
|  | */ | 
|  | static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, | 
|  | struct mcontext __user *tm_frame, int sigret, | 
|  | int ctx_has_vsx_region) | 
|  | { | 
|  | unsigned long msr = regs->msr; | 
|  |  | 
|  | /* Make sure floating point registers are stored in regs */ | 
|  | flush_fp_to_thread(current); | 
|  |  | 
|  | /* save general registers */ | 
|  | if (save_general_regs(regs, frame)) | 
|  | return 1; | 
|  |  | 
|  | #ifdef CONFIG_ALTIVEC | 
|  | /* save altivec registers */ | 
|  | if (current->thread.used_vr) { | 
|  | flush_altivec_to_thread(current); | 
|  | if (__copy_to_user(&frame->mc_vregs, ¤t->thread.vr_state, | 
|  | ELF_NVRREG * sizeof(vector128))) | 
|  | return 1; | 
|  | /* set MSR_VEC in the saved MSR value to indicate that | 
|  | frame->mc_vregs contains valid data */ | 
|  | msr |= MSR_VEC; | 
|  | } | 
|  | /* else assert((regs->msr & MSR_VEC) == 0) */ | 
|  |  | 
|  | /* We always copy to/from vrsave, it's 0 if we don't have or don't | 
|  | * use altivec. Since VSCR only contains 32 bits saved in the least | 
|  | * significant bits of a vector, we "cheat" and stuff VRSAVE in the | 
|  | * most significant bits of that same vector. --BenH | 
|  | * Note that the current VRSAVE value is in the SPR at this point. | 
|  | */ | 
|  | if (cpu_has_feature(CPU_FTR_ALTIVEC)) | 
|  | current->thread.vrsave = mfspr(SPRN_VRSAVE); | 
|  | if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32])) | 
|  | return 1; | 
|  | #endif /* CONFIG_ALTIVEC */ | 
|  | if (copy_fpr_to_user(&frame->mc_fregs, current)) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * Clear the MSR VSX bit to indicate there is no valid state attached | 
|  | * to this context, except in the specific case below where we set it. | 
|  | */ | 
|  | msr &= ~MSR_VSX; | 
|  | #ifdef CONFIG_VSX | 
|  | /* | 
|  | * Copy VSR 0-31 upper half from thread_struct to local | 
|  | * buffer, then write that to userspace.  Also set MSR_VSX in | 
|  | * the saved MSR value to indicate that frame->mc_vregs | 
|  | * contains valid data | 
|  | */ | 
|  | if (current->thread.used_vsr && ctx_has_vsx_region) { | 
|  | flush_vsx_to_thread(current); | 
|  | if (copy_vsx_to_user(&frame->mc_vsregs, current)) | 
|  | return 1; | 
|  | msr |= MSR_VSX; | 
|  | } | 
|  | #endif /* CONFIG_VSX */ | 
|  | #ifdef CONFIG_SPE | 
|  | /* save spe registers */ | 
|  | if (current->thread.used_spe) { | 
|  | flush_spe_to_thread(current); | 
|  | if (__copy_to_user(&frame->mc_vregs, current->thread.evr, | 
|  | ELF_NEVRREG * sizeof(u32))) | 
|  | return 1; | 
|  | /* set MSR_SPE in the saved MSR value to indicate that | 
|  | frame->mc_vregs contains valid data */ | 
|  | msr |= MSR_SPE; | 
|  | } | 
|  | /* else assert((regs->msr & MSR_SPE) == 0) */ | 
|  |  | 
|  | /* We always copy to/from spefscr */ | 
|  | if (__put_user(current->thread.spefscr, (u32 __user *)&frame->mc_vregs + ELF_NEVRREG)) | 
|  | return 1; | 
|  | #endif /* CONFIG_SPE */ | 
|  |  | 
|  | if (__put_user(msr, &frame->mc_gregs[PT_MSR])) | 
|  | return 1; | 
|  | /* We need to write 0 the MSR top 32 bits in the tm frame so that we | 
|  | * can check it on the restore to see if TM is active | 
|  | */ | 
|  | if (tm_frame && __put_user(0, &tm_frame->mc_gregs[PT_MSR])) | 
|  | return 1; | 
|  |  | 
|  | if (sigret) { | 
|  | /* Set up the sigreturn trampoline: li 0,sigret; sc */ | 
|  | if (__put_user(PPC_INST_ADDI + sigret, &frame->tramp[0]) | 
|  | || __put_user(PPC_INST_SC, &frame->tramp[1])) | 
|  | return 1; | 
|  | flush_icache_range((unsigned long) &frame->tramp[0], | 
|  | (unsigned long) &frame->tramp[2]); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | /* | 
|  | * Save the current user registers on the user stack. | 
|  | * We only save the altivec/spe registers if the process has used | 
|  | * altivec/spe instructions at some point. | 
|  | * We also save the transactional registers to a second ucontext in the | 
|  | * frame. | 
|  | * | 
|  | * See save_user_regs() and signal_64.c:setup_tm_sigcontexts(). | 
|  | */ | 
|  | static int save_tm_user_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *frame, | 
|  | struct mcontext __user *tm_frame, int sigret, | 
|  | unsigned long msr) | 
|  | { | 
|  | WARN_ON(tm_suspend_disabled); | 
|  |  | 
|  | /* Save both sets of general registers */ | 
|  | if (save_general_regs(¤t->thread.ckpt_regs, frame) | 
|  | || save_general_regs(regs, tm_frame)) | 
|  | return 1; | 
|  |  | 
|  | /* Stash the top half of the 64bit MSR into the 32bit MSR word | 
|  | * of the transactional mcontext.  This way we have a backward-compatible | 
|  | * MSR in the 'normal' (checkpointed) mcontext and additionally one can | 
|  | * also look at what type of transaction (T or S) was active at the | 
|  | * time of the signal. | 
|  | */ | 
|  | if (__put_user((msr >> 32), &tm_frame->mc_gregs[PT_MSR])) | 
|  | return 1; | 
|  |  | 
|  | #ifdef CONFIG_ALTIVEC | 
|  | /* save altivec registers */ | 
|  | if (current->thread.used_vr) { | 
|  | if (__copy_to_user(&frame->mc_vregs, ¤t->thread.ckvr_state, | 
|  | ELF_NVRREG * sizeof(vector128))) | 
|  | return 1; | 
|  | if (msr & MSR_VEC) { | 
|  | if (__copy_to_user(&tm_frame->mc_vregs, | 
|  | ¤t->thread.vr_state, | 
|  | ELF_NVRREG * sizeof(vector128))) | 
|  | return 1; | 
|  | } else { | 
|  | if (__copy_to_user(&tm_frame->mc_vregs, | 
|  | ¤t->thread.ckvr_state, | 
|  | ELF_NVRREG * sizeof(vector128))) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* set MSR_VEC in the saved MSR value to indicate that | 
|  | * frame->mc_vregs contains valid data | 
|  | */ | 
|  | msr |= MSR_VEC; | 
|  | } | 
|  |  | 
|  | /* We always copy to/from vrsave, it's 0 if we don't have or don't | 
|  | * use altivec. Since VSCR only contains 32 bits saved in the least | 
|  | * significant bits of a vector, we "cheat" and stuff VRSAVE in the | 
|  | * most significant bits of that same vector. --BenH | 
|  | */ | 
|  | if (cpu_has_feature(CPU_FTR_ALTIVEC)) | 
|  | current->thread.ckvrsave = mfspr(SPRN_VRSAVE); | 
|  | if (__put_user(current->thread.ckvrsave, | 
|  | (u32 __user *)&frame->mc_vregs[32])) | 
|  | return 1; | 
|  | if (msr & MSR_VEC) { | 
|  | if (__put_user(current->thread.vrsave, | 
|  | (u32 __user *)&tm_frame->mc_vregs[32])) | 
|  | return 1; | 
|  | } else { | 
|  | if (__put_user(current->thread.ckvrsave, | 
|  | (u32 __user *)&tm_frame->mc_vregs[32])) | 
|  | return 1; | 
|  | } | 
|  | #endif /* CONFIG_ALTIVEC */ | 
|  |  | 
|  | if (copy_ckfpr_to_user(&frame->mc_fregs, current)) | 
|  | return 1; | 
|  | if (msr & MSR_FP) { | 
|  | if (copy_fpr_to_user(&tm_frame->mc_fregs, current)) | 
|  | return 1; | 
|  | } else { | 
|  | if (copy_ckfpr_to_user(&tm_frame->mc_fregs, current)) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_VSX | 
|  | /* | 
|  | * Copy VSR 0-31 upper half from thread_struct to local | 
|  | * buffer, then write that to userspace.  Also set MSR_VSX in | 
|  | * the saved MSR value to indicate that frame->mc_vregs | 
|  | * contains valid data | 
|  | */ | 
|  | if (current->thread.used_vsr) { | 
|  | if (copy_ckvsx_to_user(&frame->mc_vsregs, current)) | 
|  | return 1; | 
|  | if (msr & MSR_VSX) { | 
|  | if (copy_vsx_to_user(&tm_frame->mc_vsregs, | 
|  | current)) | 
|  | return 1; | 
|  | } else { | 
|  | if (copy_ckvsx_to_user(&tm_frame->mc_vsregs, current)) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | msr |= MSR_VSX; | 
|  | } | 
|  | #endif /* CONFIG_VSX */ | 
|  | #ifdef CONFIG_SPE | 
|  | /* SPE regs are not checkpointed with TM, so this section is | 
|  | * simply the same as in save_user_regs(). | 
|  | */ | 
|  | if (current->thread.used_spe) { | 
|  | flush_spe_to_thread(current); | 
|  | if (__copy_to_user(&frame->mc_vregs, current->thread.evr, | 
|  | ELF_NEVRREG * sizeof(u32))) | 
|  | return 1; | 
|  | /* set MSR_SPE in the saved MSR value to indicate that | 
|  | * frame->mc_vregs contains valid data */ | 
|  | msr |= MSR_SPE; | 
|  | } | 
|  |  | 
|  | /* We always copy to/from spefscr */ | 
|  | if (__put_user(current->thread.spefscr, (u32 __user *)&frame->mc_vregs + ELF_NEVRREG)) | 
|  | return 1; | 
|  | #endif /* CONFIG_SPE */ | 
|  |  | 
|  | if (__put_user(msr, &frame->mc_gregs[PT_MSR])) | 
|  | return 1; | 
|  | if (sigret) { | 
|  | /* Set up the sigreturn trampoline: li 0,sigret; sc */ | 
|  | if (__put_user(PPC_INST_ADDI + sigret, &frame->tramp[0]) | 
|  | || __put_user(PPC_INST_SC, &frame->tramp[1])) | 
|  | return 1; | 
|  | flush_icache_range((unsigned long) &frame->tramp[0], | 
|  | (unsigned long) &frame->tramp[2]); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Restore the current user register values from the user stack, | 
|  | * (except for MSR). | 
|  | */ | 
|  | static long restore_user_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *sr, int sig) | 
|  | { | 
|  | long err; | 
|  | unsigned int save_r2 = 0; | 
|  | unsigned long msr; | 
|  | #ifdef CONFIG_VSX | 
|  | int i; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * restore general registers but not including MSR or SOFTE. Also | 
|  | * take care of keeping r2 (TLS) intact if not a signal | 
|  | */ | 
|  | if (!sig) | 
|  | save_r2 = (unsigned int)regs->gpr[2]; | 
|  | err = restore_general_regs(regs, sr); | 
|  | set_trap_norestart(regs); | 
|  | err |= __get_user(msr, &sr->mc_gregs[PT_MSR]); | 
|  | if (!sig) | 
|  | regs->gpr[2] = (unsigned long) save_r2; | 
|  | if (err) | 
|  | return 1; | 
|  |  | 
|  | /* if doing signal return, restore the previous little-endian mode */ | 
|  | if (sig) | 
|  | regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); | 
|  |  | 
|  | #ifdef CONFIG_ALTIVEC | 
|  | /* | 
|  | * Force the process to reload the altivec registers from | 
|  | * current->thread when it next does altivec instructions | 
|  | */ | 
|  | regs->msr &= ~MSR_VEC; | 
|  | if (msr & MSR_VEC) { | 
|  | /* restore altivec registers from the stack */ | 
|  | if (__copy_from_user(¤t->thread.vr_state, &sr->mc_vregs, | 
|  | sizeof(sr->mc_vregs))) | 
|  | return 1; | 
|  | current->thread.used_vr = true; | 
|  | } else if (current->thread.used_vr) | 
|  | memset(¤t->thread.vr_state, 0, | 
|  | ELF_NVRREG * sizeof(vector128)); | 
|  |  | 
|  | /* Always get VRSAVE back */ | 
|  | if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32])) | 
|  | return 1; | 
|  | if (cpu_has_feature(CPU_FTR_ALTIVEC)) | 
|  | mtspr(SPRN_VRSAVE, current->thread.vrsave); | 
|  | #endif /* CONFIG_ALTIVEC */ | 
|  | if (copy_fpr_from_user(current, &sr->mc_fregs)) | 
|  | return 1; | 
|  |  | 
|  | #ifdef CONFIG_VSX | 
|  | /* | 
|  | * Force the process to reload the VSX registers from | 
|  | * current->thread when it next does VSX instruction. | 
|  | */ | 
|  | regs->msr &= ~MSR_VSX; | 
|  | if (msr & MSR_VSX) { | 
|  | /* | 
|  | * Restore altivec registers from the stack to a local | 
|  | * buffer, then write this out to the thread_struct | 
|  | */ | 
|  | if (copy_vsx_from_user(current, &sr->mc_vsregs)) | 
|  | return 1; | 
|  | current->thread.used_vsr = true; | 
|  | } else if (current->thread.used_vsr) | 
|  | for (i = 0; i < 32 ; i++) | 
|  | current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; | 
|  | #endif /* CONFIG_VSX */ | 
|  | /* | 
|  | * force the process to reload the FP registers from | 
|  | * current->thread when it next does FP instructions | 
|  | */ | 
|  | regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); | 
|  |  | 
|  | #ifdef CONFIG_SPE | 
|  | /* force the process to reload the spe registers from | 
|  | current->thread when it next does spe instructions */ | 
|  | regs->msr &= ~MSR_SPE; | 
|  | if (msr & MSR_SPE) { | 
|  | /* restore spe registers from the stack */ | 
|  | if (__copy_from_user(current->thread.evr, &sr->mc_vregs, | 
|  | ELF_NEVRREG * sizeof(u32))) | 
|  | return 1; | 
|  | current->thread.used_spe = true; | 
|  | } else if (current->thread.used_spe) | 
|  | memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32)); | 
|  |  | 
|  | /* Always get SPEFSCR back */ | 
|  | if (__get_user(current->thread.spefscr, (u32 __user *)&sr->mc_vregs + ELF_NEVRREG)) | 
|  | return 1; | 
|  | #endif /* CONFIG_SPE */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | /* | 
|  | * Restore the current user register values from the user stack, except for | 
|  | * MSR, and recheckpoint the original checkpointed register state for processes | 
|  | * in transactions. | 
|  | */ | 
|  | static long restore_tm_user_regs(struct pt_regs *regs, | 
|  | struct mcontext __user *sr, | 
|  | struct mcontext __user *tm_sr) | 
|  | { | 
|  | long err; | 
|  | unsigned long msr, msr_hi; | 
|  | #ifdef CONFIG_VSX | 
|  | int i; | 
|  | #endif | 
|  |  | 
|  | if (tm_suspend_disabled) | 
|  | return 1; | 
|  | /* | 
|  | * restore general registers but not including MSR or SOFTE. Also | 
|  | * take care of keeping r2 (TLS) intact if not a signal. | 
|  | * See comment in signal_64.c:restore_tm_sigcontexts(); | 
|  | * TFHAR is restored from the checkpointed NIP; TEXASR and TFIAR | 
|  | * were set by the signal delivery. | 
|  | */ | 
|  | err = restore_general_regs(regs, tm_sr); | 
|  | err |= restore_general_regs(¤t->thread.ckpt_regs, sr); | 
|  |  | 
|  | err |= __get_user(current->thread.tm_tfhar, &sr->mc_gregs[PT_NIP]); | 
|  |  | 
|  | err |= __get_user(msr, &sr->mc_gregs[PT_MSR]); | 
|  | if (err) | 
|  | return 1; | 
|  |  | 
|  | /* Restore the previous little-endian mode */ | 
|  | regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); | 
|  |  | 
|  | #ifdef CONFIG_ALTIVEC | 
|  | regs->msr &= ~MSR_VEC; | 
|  | if (msr & MSR_VEC) { | 
|  | /* restore altivec registers from the stack */ | 
|  | if (__copy_from_user(¤t->thread.ckvr_state, &sr->mc_vregs, | 
|  | sizeof(sr->mc_vregs)) || | 
|  | __copy_from_user(¤t->thread.vr_state, | 
|  | &tm_sr->mc_vregs, | 
|  | sizeof(sr->mc_vregs))) | 
|  | return 1; | 
|  | current->thread.used_vr = true; | 
|  | } else if (current->thread.used_vr) { | 
|  | memset(¤t->thread.vr_state, 0, | 
|  | ELF_NVRREG * sizeof(vector128)); | 
|  | memset(¤t->thread.ckvr_state, 0, | 
|  | ELF_NVRREG * sizeof(vector128)); | 
|  | } | 
|  |  | 
|  | /* Always get VRSAVE back */ | 
|  | if (__get_user(current->thread.ckvrsave, | 
|  | (u32 __user *)&sr->mc_vregs[32]) || | 
|  | __get_user(current->thread.vrsave, | 
|  | (u32 __user *)&tm_sr->mc_vregs[32])) | 
|  | return 1; | 
|  | if (cpu_has_feature(CPU_FTR_ALTIVEC)) | 
|  | mtspr(SPRN_VRSAVE, current->thread.ckvrsave); | 
|  | #endif /* CONFIG_ALTIVEC */ | 
|  |  | 
|  | regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); | 
|  |  | 
|  | if (copy_fpr_from_user(current, &sr->mc_fregs) || | 
|  | copy_ckfpr_from_user(current, &tm_sr->mc_fregs)) | 
|  | return 1; | 
|  |  | 
|  | #ifdef CONFIG_VSX | 
|  | regs->msr &= ~MSR_VSX; | 
|  | if (msr & MSR_VSX) { | 
|  | /* | 
|  | * Restore altivec registers from the stack to a local | 
|  | * buffer, then write this out to the thread_struct | 
|  | */ | 
|  | if (copy_vsx_from_user(current, &tm_sr->mc_vsregs) || | 
|  | copy_ckvsx_from_user(current, &sr->mc_vsregs)) | 
|  | return 1; | 
|  | current->thread.used_vsr = true; | 
|  | } else if (current->thread.used_vsr) | 
|  | for (i = 0; i < 32 ; i++) { | 
|  | current->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; | 
|  | current->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = 0; | 
|  | } | 
|  | #endif /* CONFIG_VSX */ | 
|  |  | 
|  | #ifdef CONFIG_SPE | 
|  | /* SPE regs are not checkpointed with TM, so this section is | 
|  | * simply the same as in restore_user_regs(). | 
|  | */ | 
|  | regs->msr &= ~MSR_SPE; | 
|  | if (msr & MSR_SPE) { | 
|  | if (__copy_from_user(current->thread.evr, &sr->mc_vregs, | 
|  | ELF_NEVRREG * sizeof(u32))) | 
|  | return 1; | 
|  | current->thread.used_spe = true; | 
|  | } else if (current->thread.used_spe) | 
|  | memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32)); | 
|  |  | 
|  | /* Always get SPEFSCR back */ | 
|  | if (__get_user(current->thread.spefscr, (u32 __user *)&sr->mc_vregs | 
|  | + ELF_NEVRREG)) | 
|  | return 1; | 
|  | #endif /* CONFIG_SPE */ | 
|  |  | 
|  | /* Get the top half of the MSR from the user context */ | 
|  | if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR])) | 
|  | return 1; | 
|  | msr_hi <<= 32; | 
|  | /* If TM bits are set to the reserved value, it's an invalid context */ | 
|  | if (MSR_TM_RESV(msr_hi)) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * Disabling preemption, since it is unsafe to be preempted | 
|  | * with MSR[TS] set without recheckpointing. | 
|  | */ | 
|  | preempt_disable(); | 
|  |  | 
|  | /* | 
|  | * CAUTION: | 
|  | * After regs->MSR[TS] being updated, make sure that get_user(), | 
|  | * put_user() or similar functions are *not* called. These | 
|  | * functions can generate page faults which will cause the process | 
|  | * to be de-scheduled with MSR[TS] set but without calling | 
|  | * tm_recheckpoint(). This can cause a bug. | 
|  | * | 
|  | * Pull in the MSR TM bits from the user context | 
|  | */ | 
|  | regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr_hi & MSR_TS_MASK); | 
|  | /* Now, recheckpoint.  This loads up all of the checkpointed (older) | 
|  | * registers, including FP and V[S]Rs.  After recheckpointing, the | 
|  | * transactional versions should be loaded. | 
|  | */ | 
|  | tm_enable(); | 
|  | /* Make sure the transaction is marked as failed */ | 
|  | current->thread.tm_texasr |= TEXASR_FS; | 
|  | /* This loads the checkpointed FP/VEC state, if used */ | 
|  | tm_recheckpoint(¤t->thread); | 
|  |  | 
|  | /* This loads the speculative FP/VEC state, if used */ | 
|  | msr_check_and_set(msr & (MSR_FP | MSR_VEC)); | 
|  | if (msr & MSR_FP) { | 
|  | load_fp_state(¤t->thread.fp_state); | 
|  | regs->msr |= (MSR_FP | current->thread.fpexc_mode); | 
|  | } | 
|  | #ifdef CONFIG_ALTIVEC | 
|  | if (msr & MSR_VEC) { | 
|  | load_vr_state(¤t->thread.vr_state); | 
|  | regs->msr |= MSR_VEC; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | preempt_enable(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  |  | 
|  | #define copy_siginfo_to_user	copy_siginfo_to_user32 | 
|  |  | 
|  | #endif /* CONFIG_PPC64 */ | 
|  |  | 
|  | /* | 
|  | * Set up a signal frame for a "real-time" signal handler | 
|  | * (one which gets siginfo). | 
|  | */ | 
|  | int handle_rt_signal32(struct ksignal *ksig, sigset_t *oldset, | 
|  | struct task_struct *tsk) | 
|  | { | 
|  | struct rt_sigframe __user *rt_sf; | 
|  | struct mcontext __user *frame; | 
|  | struct mcontext __user *tm_frame = NULL; | 
|  | void __user *addr; | 
|  | unsigned long newsp = 0; | 
|  | int sigret; | 
|  | unsigned long tramp; | 
|  | struct pt_regs *regs = tsk->thread.regs; | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | /* Save the thread's msr before get_tm_stackpointer() changes it */ | 
|  | unsigned long msr = regs->msr; | 
|  | #endif | 
|  |  | 
|  | BUG_ON(tsk != current); | 
|  |  | 
|  | /* Set up Signal Frame */ | 
|  | /* Put a Real Time Context onto stack */ | 
|  | rt_sf = get_sigframe(ksig, get_tm_stackpointer(tsk), sizeof(*rt_sf), 1); | 
|  | addr = rt_sf; | 
|  | if (unlikely(rt_sf == NULL)) | 
|  | goto badframe; | 
|  |  | 
|  | /* Put the siginfo & fill in most of the ucontext */ | 
|  | if (copy_siginfo_to_user(&rt_sf->info, &ksig->info) | 
|  | || __put_user(0, &rt_sf->uc.uc_flags) | 
|  | || __save_altstack(&rt_sf->uc.uc_stack, regs->gpr[1]) | 
|  | || __put_user(to_user_ptr(&rt_sf->uc.uc_mcontext), | 
|  | &rt_sf->uc.uc_regs) | 
|  | || put_sigset_t(&rt_sf->uc.uc_sigmask, oldset)) | 
|  | goto badframe; | 
|  |  | 
|  | /* Save user registers on the stack */ | 
|  | frame = &rt_sf->uc.uc_mcontext; | 
|  | addr = frame; | 
|  | if (vdso32_rt_sigtramp && tsk->mm->context.vdso_base) { | 
|  | sigret = 0; | 
|  | tramp = tsk->mm->context.vdso_base + vdso32_rt_sigtramp; | 
|  | } else { | 
|  | sigret = __NR_rt_sigreturn; | 
|  | tramp = (unsigned long) frame->tramp; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | tm_frame = &rt_sf->uc_transact.uc_mcontext; | 
|  | if (MSR_TM_ACTIVE(msr)) { | 
|  | if (__put_user((unsigned long)&rt_sf->uc_transact, | 
|  | &rt_sf->uc.uc_link) || | 
|  | __put_user((unsigned long)tm_frame, | 
|  | &rt_sf->uc_transact.uc_regs)) | 
|  | goto badframe; | 
|  | if (save_tm_user_regs(regs, frame, tm_frame, sigret, msr)) | 
|  | goto badframe; | 
|  | } | 
|  | else | 
|  | #endif | 
|  | { | 
|  | if (__put_user(0, &rt_sf->uc.uc_link)) | 
|  | goto badframe; | 
|  | if (save_user_regs(regs, frame, tm_frame, sigret, 1)) | 
|  | goto badframe; | 
|  | } | 
|  | regs->link = tramp; | 
|  |  | 
|  | tsk->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */ | 
|  |  | 
|  | /* create a stack frame for the caller of the handler */ | 
|  | newsp = ((unsigned long)rt_sf) - (__SIGNAL_FRAMESIZE + 16); | 
|  | addr = (void __user *)regs->gpr[1]; | 
|  | if (put_user(regs->gpr[1], (u32 __user *)newsp)) | 
|  | goto badframe; | 
|  |  | 
|  | /* Fill registers for signal handler */ | 
|  | regs->gpr[1] = newsp; | 
|  | regs->gpr[3] = ksig->sig; | 
|  | regs->gpr[4] = (unsigned long) &rt_sf->info; | 
|  | regs->gpr[5] = (unsigned long) &rt_sf->uc; | 
|  | regs->gpr[6] = (unsigned long) rt_sf; | 
|  | regs->nip = (unsigned long) ksig->ka.sa.sa_handler; | 
|  | /* enter the signal handler in native-endian mode */ | 
|  | regs->msr &= ~MSR_LE; | 
|  | regs->msr |= (MSR_KERNEL & MSR_LE); | 
|  | return 0; | 
|  |  | 
|  | badframe: | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in handle_rt_signal32: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | tsk->comm, tsk->pid, | 
|  | addr, regs->nip, regs->link); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int sig) | 
|  | { | 
|  | sigset_t set; | 
|  | struct mcontext __user *mcp; | 
|  |  | 
|  | if (get_sigset_t(&set, &ucp->uc_sigmask)) | 
|  | return -EFAULT; | 
|  | #ifdef CONFIG_PPC64 | 
|  | { | 
|  | u32 cmcp; | 
|  |  | 
|  | if (__get_user(cmcp, &ucp->uc_regs)) | 
|  | return -EFAULT; | 
|  | mcp = (struct mcontext __user *)(u64)cmcp; | 
|  | /* no need to check access_ok(mcp), since mcp < 4GB */ | 
|  | } | 
|  | #else | 
|  | if (__get_user(mcp, &ucp->uc_regs)) | 
|  | return -EFAULT; | 
|  | if (!access_ok(mcp, sizeof(*mcp))) | 
|  | return -EFAULT; | 
|  | #endif | 
|  | set_current_blocked(&set); | 
|  | if (restore_user_regs(regs, mcp, sig)) | 
|  | return -EFAULT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | static int do_setcontext_tm(struct ucontext __user *ucp, | 
|  | struct ucontext __user *tm_ucp, | 
|  | struct pt_regs *regs) | 
|  | { | 
|  | sigset_t set; | 
|  | struct mcontext __user *mcp; | 
|  | struct mcontext __user *tm_mcp; | 
|  | u32 cmcp; | 
|  | u32 tm_cmcp; | 
|  |  | 
|  | if (get_sigset_t(&set, &ucp->uc_sigmask)) | 
|  | return -EFAULT; | 
|  |  | 
|  | if (__get_user(cmcp, &ucp->uc_regs) || | 
|  | __get_user(tm_cmcp, &tm_ucp->uc_regs)) | 
|  | return -EFAULT; | 
|  | mcp = (struct mcontext __user *)(u64)cmcp; | 
|  | tm_mcp = (struct mcontext __user *)(u64)tm_cmcp; | 
|  | /* no need to check access_ok(mcp), since mcp < 4GB */ | 
|  |  | 
|  | set_current_blocked(&set); | 
|  | if (restore_tm_user_regs(regs, mcp, tm_mcp)) | 
|  | return -EFAULT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | COMPAT_SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, | 
|  | struct ucontext __user *, new_ctx, int, ctx_size) | 
|  | #else | 
|  | SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, | 
|  | struct ucontext __user *, new_ctx, long, ctx_size) | 
|  | #endif | 
|  | { | 
|  | struct pt_regs *regs = current_pt_regs(); | 
|  | int ctx_has_vsx_region = 0; | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | unsigned long new_msr = 0; | 
|  |  | 
|  | if (new_ctx) { | 
|  | struct mcontext __user *mcp; | 
|  | u32 cmcp; | 
|  |  | 
|  | /* | 
|  | * Get pointer to the real mcontext.  No need for | 
|  | * access_ok since we are dealing with compat | 
|  | * pointers. | 
|  | */ | 
|  | if (__get_user(cmcp, &new_ctx->uc_regs)) | 
|  | return -EFAULT; | 
|  | mcp = (struct mcontext __user *)(u64)cmcp; | 
|  | if (__get_user(new_msr, &mcp->mc_gregs[PT_MSR])) | 
|  | return -EFAULT; | 
|  | } | 
|  | /* | 
|  | * Check that the context is not smaller than the original | 
|  | * size (with VMX but without VSX) | 
|  | */ | 
|  | if (ctx_size < UCONTEXTSIZEWITHOUTVSX) | 
|  | return -EINVAL; | 
|  | /* | 
|  | * If the new context state sets the MSR VSX bits but | 
|  | * it doesn't provide VSX state. | 
|  | */ | 
|  | if ((ctx_size < sizeof(struct ucontext)) && | 
|  | (new_msr & MSR_VSX)) | 
|  | return -EINVAL; | 
|  | /* Does the context have enough room to store VSX data? */ | 
|  | if (ctx_size >= sizeof(struct ucontext)) | 
|  | ctx_has_vsx_region = 1; | 
|  | #else | 
|  | /* Context size is for future use. Right now, we only make sure | 
|  | * we are passed something we understand | 
|  | */ | 
|  | if (ctx_size < sizeof(struct ucontext)) | 
|  | return -EINVAL; | 
|  | #endif | 
|  | if (old_ctx != NULL) { | 
|  | struct mcontext __user *mctx; | 
|  |  | 
|  | /* | 
|  | * old_ctx might not be 16-byte aligned, in which | 
|  | * case old_ctx->uc_mcontext won't be either. | 
|  | * Because we have the old_ctx->uc_pad2 field | 
|  | * before old_ctx->uc_mcontext, we need to round down | 
|  | * from &old_ctx->uc_mcontext to a 16-byte boundary. | 
|  | */ | 
|  | mctx = (struct mcontext __user *) | 
|  | ((unsigned long) &old_ctx->uc_mcontext & ~0xfUL); | 
|  | if (!access_ok(old_ctx, ctx_size) | 
|  | || save_user_regs(regs, mctx, NULL, 0, ctx_has_vsx_region) | 
|  | || put_sigset_t(&old_ctx->uc_sigmask, ¤t->blocked) | 
|  | || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs)) | 
|  | return -EFAULT; | 
|  | } | 
|  | if (new_ctx == NULL) | 
|  | return 0; | 
|  | if (!access_ok(new_ctx, ctx_size) || | 
|  | fault_in_pages_readable((u8 __user *)new_ctx, ctx_size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* | 
|  | * If we get a fault copying the context into the kernel's | 
|  | * image of the user's registers, we can't just return -EFAULT | 
|  | * because the user's registers will be corrupted.  For instance | 
|  | * the NIP value may have been updated but not some of the | 
|  | * other registers.  Given that we have done the access_ok | 
|  | * and successfully read the first and last bytes of the region | 
|  | * above, this should only happen in an out-of-memory situation | 
|  | * or if another thread unmaps the region containing the context. | 
|  | * We kill the task with a SIGSEGV in this situation. | 
|  | */ | 
|  | if (do_setcontext(new_ctx, regs, 0)) | 
|  | do_exit(SIGSEGV); | 
|  |  | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | COMPAT_SYSCALL_DEFINE0(rt_sigreturn) | 
|  | #else | 
|  | SYSCALL_DEFINE0(rt_sigreturn) | 
|  | #endif | 
|  | { | 
|  | struct rt_sigframe __user *rt_sf; | 
|  | struct pt_regs *regs = current_pt_regs(); | 
|  | int tm_restore = 0; | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | struct ucontext __user *uc_transact; | 
|  | unsigned long msr_hi; | 
|  | unsigned long tmp; | 
|  | #endif | 
|  | /* Always make any pending restarted system calls return -EINTR */ | 
|  | current->restart_block.fn = do_no_restart_syscall; | 
|  |  | 
|  | rt_sf = (struct rt_sigframe __user *) | 
|  | (regs->gpr[1] + __SIGNAL_FRAMESIZE + 16); | 
|  | if (!access_ok(rt_sf, sizeof(*rt_sf))) | 
|  | goto bad; | 
|  |  | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | /* | 
|  | * If there is a transactional state then throw it away. | 
|  | * The purpose of a sigreturn is to destroy all traces of the | 
|  | * signal frame, this includes any transactional state created | 
|  | * within in. We only check for suspended as we can never be | 
|  | * active in the kernel, we are active, there is nothing better to | 
|  | * do than go ahead and Bad Thing later. | 
|  | * The cause is not important as there will never be a | 
|  | * recheckpoint so it's not user visible. | 
|  | */ | 
|  | if (MSR_TM_SUSPENDED(mfmsr())) | 
|  | tm_reclaim_current(0); | 
|  |  | 
|  | if (__get_user(tmp, &rt_sf->uc.uc_link)) | 
|  | goto bad; | 
|  | uc_transact = (struct ucontext __user *)(uintptr_t)tmp; | 
|  | if (uc_transact) { | 
|  | u32 cmcp; | 
|  | struct mcontext __user *mcp; | 
|  |  | 
|  | if (__get_user(cmcp, &uc_transact->uc_regs)) | 
|  | return -EFAULT; | 
|  | mcp = (struct mcontext __user *)(u64)cmcp; | 
|  | /* The top 32 bits of the MSR are stashed in the transactional | 
|  | * ucontext. */ | 
|  | if (__get_user(msr_hi, &mcp->mc_gregs[PT_MSR])) | 
|  | goto bad; | 
|  |  | 
|  | if (MSR_TM_ACTIVE(msr_hi<<32)) { | 
|  | /* Trying to start TM on non TM system */ | 
|  | if (!cpu_has_feature(CPU_FTR_TM)) | 
|  | goto bad; | 
|  | /* We only recheckpoint on return if we're | 
|  | * transaction. | 
|  | */ | 
|  | tm_restore = 1; | 
|  | if (do_setcontext_tm(&rt_sf->uc, uc_transact, regs)) | 
|  | goto bad; | 
|  | } | 
|  | } | 
|  | if (!tm_restore) { | 
|  | /* | 
|  | * Unset regs->msr because ucontext MSR TS is not | 
|  | * set, and recheckpoint was not called. This avoid | 
|  | * hitting a TM Bad thing at RFID | 
|  | */ | 
|  | regs->msr &= ~MSR_TS_MASK; | 
|  | } | 
|  | /* Fall through, for non-TM restore */ | 
|  | #endif | 
|  | if (!tm_restore) | 
|  | if (do_setcontext(&rt_sf->uc, regs, 1)) | 
|  | goto bad; | 
|  |  | 
|  | /* | 
|  | * It's not clear whether or why it is desirable to save the | 
|  | * sigaltstack setting on signal delivery and restore it on | 
|  | * signal return.  But other architectures do this and we have | 
|  | * always done it up until now so it is probably better not to | 
|  | * change it.  -- paulus | 
|  | */ | 
|  | #ifdef CONFIG_PPC64 | 
|  | if (compat_restore_altstack(&rt_sf->uc.uc_stack)) | 
|  | goto bad; | 
|  | #else | 
|  | if (restore_altstack(&rt_sf->uc.uc_stack)) | 
|  | goto bad; | 
|  | #endif | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | return 0; | 
|  |  | 
|  | bad: | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in sys_rt_sigreturn: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | rt_sf, regs->nip, regs->link); | 
|  |  | 
|  | force_sig(SIGSEGV); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC32 | 
|  | SYSCALL_DEFINE3(debug_setcontext, struct ucontext __user *, ctx, | 
|  | int, ndbg, struct sig_dbg_op __user *, dbg) | 
|  | { | 
|  | struct pt_regs *regs = current_pt_regs(); | 
|  | struct sig_dbg_op op; | 
|  | int i; | 
|  | unsigned long new_msr = regs->msr; | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | unsigned long new_dbcr0 = current->thread.debug.dbcr0; | 
|  | #endif | 
|  |  | 
|  | for (i=0; i<ndbg; i++) { | 
|  | if (copy_from_user(&op, dbg + i, sizeof(op))) | 
|  | return -EFAULT; | 
|  | switch (op.dbg_type) { | 
|  | case SIG_DBG_SINGLE_STEPPING: | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | if (op.dbg_value) { | 
|  | new_msr |= MSR_DE; | 
|  | new_dbcr0 |= (DBCR0_IDM | DBCR0_IC); | 
|  | } else { | 
|  | new_dbcr0 &= ~DBCR0_IC; | 
|  | if (!DBCR_ACTIVE_EVENTS(new_dbcr0, | 
|  | current->thread.debug.dbcr1)) { | 
|  | new_msr &= ~MSR_DE; | 
|  | new_dbcr0 &= ~DBCR0_IDM; | 
|  | } | 
|  | } | 
|  | #else | 
|  | if (op.dbg_value) | 
|  | new_msr |= MSR_SE; | 
|  | else | 
|  | new_msr &= ~MSR_SE; | 
|  | #endif | 
|  | break; | 
|  | case SIG_DBG_BRANCH_TRACING: | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | return -EINVAL; | 
|  | #else | 
|  | if (op.dbg_value) | 
|  | new_msr |= MSR_BE; | 
|  | else | 
|  | new_msr &= ~MSR_BE; | 
|  | #endif | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* We wait until here to actually install the values in the | 
|  | registers so if we fail in the above loop, it will not | 
|  | affect the contents of these registers.  After this point, | 
|  | failure is a problem, anyway, and it's very unlikely unless | 
|  | the user is really doing something wrong. */ | 
|  | regs->msr = new_msr; | 
|  | #ifdef CONFIG_PPC_ADV_DEBUG_REGS | 
|  | current->thread.debug.dbcr0 = new_dbcr0; | 
|  | #endif | 
|  |  | 
|  | if (!access_ok(ctx, sizeof(*ctx)) || | 
|  | fault_in_pages_readable((u8 __user *)ctx, sizeof(*ctx))) | 
|  | return -EFAULT; | 
|  |  | 
|  | /* | 
|  | * If we get a fault copying the context into the kernel's | 
|  | * image of the user's registers, we can't just return -EFAULT | 
|  | * because the user's registers will be corrupted.  For instance | 
|  | * the NIP value may have been updated but not some of the | 
|  | * other registers.  Given that we have done the access_ok | 
|  | * and successfully read the first and last bytes of the region | 
|  | * above, this should only happen in an out-of-memory situation | 
|  | * or if another thread unmaps the region containing the context. | 
|  | * We kill the task with a SIGSEGV in this situation. | 
|  | */ | 
|  | if (do_setcontext(ctx, regs, 1)) { | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO "%s[%d]: bad frame in " | 
|  | "sys_debug_setcontext: %p nip %08lx " | 
|  | "lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | ctx, regs->nip, regs->link); | 
|  |  | 
|  | force_sig(SIGSEGV); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * It's not clear whether or why it is desirable to save the | 
|  | * sigaltstack setting on signal delivery and restore it on | 
|  | * signal return.  But other architectures do this and we have | 
|  | * always done it up until now so it is probably better not to | 
|  | * change it.  -- paulus | 
|  | */ | 
|  | restore_altstack(&ctx->uc_stack); | 
|  |  | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | out: | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * OK, we're invoking a handler | 
|  | */ | 
|  | int handle_signal32(struct ksignal *ksig, sigset_t *oldset, | 
|  | struct task_struct *tsk) | 
|  | { | 
|  | struct sigcontext __user *sc; | 
|  | struct sigframe __user *frame; | 
|  | struct mcontext __user *tm_mctx = NULL; | 
|  | unsigned long newsp = 0; | 
|  | int sigret; | 
|  | unsigned long tramp; | 
|  | struct pt_regs *regs = tsk->thread.regs; | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | /* Save the thread's msr before get_tm_stackpointer() changes it */ | 
|  | unsigned long msr = regs->msr; | 
|  | #endif | 
|  |  | 
|  | BUG_ON(tsk != current); | 
|  |  | 
|  | /* Set up Signal Frame */ | 
|  | frame = get_sigframe(ksig, get_tm_stackpointer(tsk), sizeof(*frame), 1); | 
|  | if (unlikely(frame == NULL)) | 
|  | goto badframe; | 
|  | sc = (struct sigcontext __user *) &frame->sctx; | 
|  |  | 
|  | #if _NSIG != 64 | 
|  | #error "Please adjust handle_signal()" | 
|  | #endif | 
|  | if (__put_user(to_user_ptr(ksig->ka.sa.sa_handler), &sc->handler) | 
|  | || __put_user(oldset->sig[0], &sc->oldmask) | 
|  | #ifdef CONFIG_PPC64 | 
|  | || __put_user((oldset->sig[0] >> 32), &sc->_unused[3]) | 
|  | #else | 
|  | || __put_user(oldset->sig[1], &sc->_unused[3]) | 
|  | #endif | 
|  | || __put_user(to_user_ptr(&frame->mctx), &sc->regs) | 
|  | || __put_user(ksig->sig, &sc->signal)) | 
|  | goto badframe; | 
|  |  | 
|  | if (vdso32_sigtramp && tsk->mm->context.vdso_base) { | 
|  | sigret = 0; | 
|  | tramp = tsk->mm->context.vdso_base + vdso32_sigtramp; | 
|  | } else { | 
|  | sigret = __NR_sigreturn; | 
|  | tramp = (unsigned long) frame->mctx.tramp; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | tm_mctx = &frame->mctx_transact; | 
|  | if (MSR_TM_ACTIVE(msr)) { | 
|  | if (save_tm_user_regs(regs, &frame->mctx, &frame->mctx_transact, | 
|  | sigret, msr)) | 
|  | goto badframe; | 
|  | } | 
|  | else | 
|  | #endif | 
|  | { | 
|  | if (save_user_regs(regs, &frame->mctx, tm_mctx, sigret, 1)) | 
|  | goto badframe; | 
|  | } | 
|  |  | 
|  | regs->link = tramp; | 
|  |  | 
|  | tsk->thread.fp_state.fpscr = 0;	/* turn off all fp exceptions */ | 
|  |  | 
|  | /* create a stack frame for the caller of the handler */ | 
|  | newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE; | 
|  | if (put_user(regs->gpr[1], (u32 __user *)newsp)) | 
|  | goto badframe; | 
|  |  | 
|  | regs->gpr[1] = newsp; | 
|  | regs->gpr[3] = ksig->sig; | 
|  | regs->gpr[4] = (unsigned long) sc; | 
|  | regs->nip = (unsigned long) (unsigned long)ksig->ka.sa.sa_handler; | 
|  | /* enter the signal handler in big-endian mode */ | 
|  | regs->msr &= ~MSR_LE; | 
|  | return 0; | 
|  |  | 
|  | badframe: | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in handle_signal32: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | tsk->comm, tsk->pid, | 
|  | frame, regs->nip, regs->link); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Do a signal return; undo the signal stack. | 
|  | */ | 
|  | #ifdef CONFIG_PPC64 | 
|  | COMPAT_SYSCALL_DEFINE0(sigreturn) | 
|  | #else | 
|  | SYSCALL_DEFINE0(sigreturn) | 
|  | #endif | 
|  | { | 
|  | struct pt_regs *regs = current_pt_regs(); | 
|  | struct sigframe __user *sf; | 
|  | struct sigcontext __user *sc; | 
|  | struct sigcontext sigctx; | 
|  | struct mcontext __user *sr; | 
|  | void __user *addr; | 
|  | sigset_t set; | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | struct mcontext __user *mcp, *tm_mcp; | 
|  | unsigned long msr_hi; | 
|  | #endif | 
|  |  | 
|  | /* Always make any pending restarted system calls return -EINTR */ | 
|  | current->restart_block.fn = do_no_restart_syscall; | 
|  |  | 
|  | sf = (struct sigframe __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE); | 
|  | sc = &sf->sctx; | 
|  | addr = sc; | 
|  | if (copy_from_user(&sigctx, sc, sizeof(sigctx))) | 
|  | goto badframe; | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | /* | 
|  | * Note that PPC32 puts the upper 32 bits of the sigmask in the | 
|  | * unused part of the signal stackframe | 
|  | */ | 
|  | set.sig[0] = sigctx.oldmask + ((long)(sigctx._unused[3]) << 32); | 
|  | #else | 
|  | set.sig[0] = sigctx.oldmask; | 
|  | set.sig[1] = sigctx._unused[3]; | 
|  | #endif | 
|  | set_current_blocked(&set); | 
|  |  | 
|  | #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | 
|  | mcp = (struct mcontext __user *)&sf->mctx; | 
|  | tm_mcp = (struct mcontext __user *)&sf->mctx_transact; | 
|  | if (__get_user(msr_hi, &tm_mcp->mc_gregs[PT_MSR])) | 
|  | goto badframe; | 
|  | if (MSR_TM_ACTIVE(msr_hi<<32)) { | 
|  | if (!cpu_has_feature(CPU_FTR_TM)) | 
|  | goto badframe; | 
|  | if (restore_tm_user_regs(regs, mcp, tm_mcp)) | 
|  | goto badframe; | 
|  | } else | 
|  | #endif | 
|  | { | 
|  | sr = (struct mcontext __user *)from_user_ptr(sigctx.regs); | 
|  | addr = sr; | 
|  | if (!access_ok(sr, sizeof(*sr)) | 
|  | || restore_user_regs(regs, sr, 1)) | 
|  | goto badframe; | 
|  | } | 
|  |  | 
|  | set_thread_flag(TIF_RESTOREALL); | 
|  | return 0; | 
|  |  | 
|  | badframe: | 
|  | if (show_unhandled_signals) | 
|  | printk_ratelimited(KERN_INFO | 
|  | "%s[%d]: bad frame in sys_sigreturn: " | 
|  | "%p nip %08lx lr %08lx\n", | 
|  | current->comm, current->pid, | 
|  | addr, regs->nip, regs->link); | 
|  |  | 
|  | force_sig(SIGSEGV); | 
|  | return 0; | 
|  | } |