|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | *  battery.c - ACPI Battery Driver (Revision: 2.0) | 
|  | * | 
|  | *  Copyright (C) 2007 Alexey Starikovskiy <astarikovskiy@suse.de> | 
|  | *  Copyright (C) 2004-2007 Vladimir Lebedev <vladimir.p.lebedev@intel.com> | 
|  | *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | 
|  | *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/async.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/suspend.h> | 
|  | #include <linux/types.h> | 
|  |  | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/uaccess.h> | 
|  | #endif | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/power_supply.h> | 
|  |  | 
|  | #include <acpi/battery.h> | 
|  |  | 
|  | #define PREFIX "ACPI: " | 
|  |  | 
|  | #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF | 
|  | #define ACPI_BATTERY_CAPACITY_VALID(capacity) \ | 
|  | ((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN) | 
|  |  | 
|  | #define ACPI_BATTERY_DEVICE_NAME	"Battery" | 
|  |  | 
|  | /* Battery power unit: 0 means mW, 1 means mA */ | 
|  | #define ACPI_BATTERY_POWER_UNIT_MA	1 | 
|  |  | 
|  | #define ACPI_BATTERY_STATE_DISCHARGING	0x1 | 
|  | #define ACPI_BATTERY_STATE_CHARGING	0x2 | 
|  | #define ACPI_BATTERY_STATE_CRITICAL	0x4 | 
|  |  | 
|  | #define _COMPONENT		ACPI_BATTERY_COMPONENT | 
|  |  | 
|  | ACPI_MODULE_NAME("battery"); | 
|  |  | 
|  | MODULE_AUTHOR("Paul Diefenbaugh"); | 
|  | MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>"); | 
|  | MODULE_DESCRIPTION("ACPI Battery Driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | static async_cookie_t async_cookie; | 
|  | static bool battery_driver_registered; | 
|  | static int battery_bix_broken_package; | 
|  | static int battery_notification_delay_ms; | 
|  | static int battery_ac_is_broken; | 
|  | static int battery_check_pmic = 1; | 
|  | static unsigned int cache_time = 1000; | 
|  | module_param(cache_time, uint, 0644); | 
|  | MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); | 
|  |  | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | extern struct proc_dir_entry *acpi_lock_battery_dir(void); | 
|  | extern void *acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir); | 
|  | #endif | 
|  |  | 
|  | static const struct acpi_device_id battery_device_ids[] = { | 
|  | {"PNP0C0A", 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(acpi, battery_device_ids); | 
|  |  | 
|  | /* Lists of PMIC ACPI HIDs with an (often better) native battery driver */ | 
|  | static const char * const acpi_battery_blacklist[] = { | 
|  | "INT33F4", /* X-Powers AXP288 PMIC */ | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | ACPI_BATTERY_ALARM_PRESENT, | 
|  | ACPI_BATTERY_XINFO_PRESENT, | 
|  | ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, | 
|  | /* On Lenovo Thinkpad models from 2010 and 2011, the power unit | 
|  | switches between mWh and mAh depending on whether the system | 
|  | is running on battery or not.  When mAh is the unit, most | 
|  | reported values are incorrect and need to be adjusted by | 
|  | 10000/design_voltage.  Verified on x201, t410, t410s, and x220. | 
|  | Pre-2010 and 2012 models appear to always report in mWh and | 
|  | are thus unaffected (tested with t42, t61, t500, x200, x300, | 
|  | and x230).  Also, in mid-2012 Lenovo issued a BIOS update for | 
|  | the 2011 models that fixes the issue (tested on x220 with a | 
|  | post-1.29 BIOS), but as of Nov. 2012, no such update is | 
|  | available for the 2010 models.  */ | 
|  | ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
|  | /* for batteries reporting current capacity with design capacity | 
|  | * on a full charge, but showing degradation in full charge cap. | 
|  | */ | 
|  | ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, | 
|  | }; | 
|  |  | 
|  | struct acpi_battery { | 
|  | struct mutex lock; | 
|  | struct mutex sysfs_lock; | 
|  | struct power_supply *bat; | 
|  | struct power_supply_desc bat_desc; | 
|  | struct acpi_device *device; | 
|  | struct notifier_block pm_nb; | 
|  | struct list_head list; | 
|  | unsigned long update_time; | 
|  | int revision; | 
|  | int rate_now; | 
|  | int capacity_now; | 
|  | int voltage_now; | 
|  | int design_capacity; | 
|  | int full_charge_capacity; | 
|  | int technology; | 
|  | int design_voltage; | 
|  | int design_capacity_warning; | 
|  | int design_capacity_low; | 
|  | int cycle_count; | 
|  | int measurement_accuracy; | 
|  | int max_sampling_time; | 
|  | int min_sampling_time; | 
|  | int max_averaging_interval; | 
|  | int min_averaging_interval; | 
|  | int capacity_granularity_1; | 
|  | int capacity_granularity_2; | 
|  | int alarm; | 
|  | char model_number[32]; | 
|  | char serial_number[32]; | 
|  | char type[32]; | 
|  | char oem_info[32]; | 
|  | int state; | 
|  | int power_unit; | 
|  | unsigned long flags; | 
|  | }; | 
|  |  | 
|  | #define to_acpi_battery(x) power_supply_get_drvdata(x) | 
|  |  | 
|  | static inline int acpi_battery_present(struct acpi_battery *battery) | 
|  | { | 
|  | return battery->device->status.battery_present; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_technology(struct acpi_battery *battery) | 
|  | { | 
|  | if (!strcasecmp("NiCd", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_NiCd; | 
|  | if (!strcasecmp("NiMH", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_NiMH; | 
|  | if (!strcasecmp("LION", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_LION; | 
|  | if (!strncasecmp("LI-ION", battery->type, 6)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_LION; | 
|  | if (!strcasecmp("LiP", battery->type)) | 
|  | return POWER_SUPPLY_TECHNOLOGY_LIPO; | 
|  | return POWER_SUPPLY_TECHNOLOGY_UNKNOWN; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_state(struct acpi_battery *battery); | 
|  |  | 
|  | static int acpi_battery_is_charged(struct acpi_battery *battery) | 
|  | { | 
|  | /* charging, discharging or critical low */ | 
|  | if (battery->state != 0) | 
|  | return 0; | 
|  |  | 
|  | /* battery not reporting charge */ | 
|  | if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | 
|  | battery->capacity_now == 0) | 
|  | return 0; | 
|  |  | 
|  | /* good batteries update full_charge as the batteries degrade */ | 
|  | if (battery->full_charge_capacity == battery->capacity_now) | 
|  | return 1; | 
|  |  | 
|  | /* fallback to using design values for broken batteries */ | 
|  | if (battery->design_capacity == battery->capacity_now) | 
|  | return 1; | 
|  |  | 
|  | /* we don't do any sort of metric based on percentages */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool acpi_battery_is_degraded(struct acpi_battery *battery) | 
|  | { | 
|  | return ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | 
|  | ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity) && | 
|  | battery->full_charge_capacity < battery->design_capacity; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_handle_discharging(struct acpi_battery *battery) | 
|  | { | 
|  | /* | 
|  | * Some devices wrongly report discharging if the battery's charge level | 
|  | * was above the device's start charging threshold atm the AC adapter | 
|  | * was plugged in and the device thus did not start a new charge cycle. | 
|  | */ | 
|  | if ((battery_ac_is_broken || power_supply_is_system_supplied()) && | 
|  | battery->rate_now == 0) | 
|  | return POWER_SUPPLY_STATUS_NOT_CHARGING; | 
|  |  | 
|  | return POWER_SUPPLY_STATUS_DISCHARGING; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | int full_capacity = ACPI_BATTERY_VALUE_UNKNOWN, ret = 0; | 
|  | struct acpi_battery *battery = to_acpi_battery(psy); | 
|  |  | 
|  | if (acpi_battery_present(battery)) { | 
|  | /* run battery update only if it is present */ | 
|  | acpi_battery_get_state(battery); | 
|  | } else if (psp != POWER_SUPPLY_PROP_PRESENT) | 
|  | return -ENODEV; | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_STATUS: | 
|  | if (battery->state & ACPI_BATTERY_STATE_DISCHARGING) | 
|  | val->intval = acpi_battery_handle_discharging(battery); | 
|  | else if (battery->state & ACPI_BATTERY_STATE_CHARGING) | 
|  | val->intval = POWER_SUPPLY_STATUS_CHARGING; | 
|  | else if (acpi_battery_is_charged(battery)) | 
|  | val->intval = POWER_SUPPLY_STATUS_FULL; | 
|  | else | 
|  | val->intval = POWER_SUPPLY_STATUS_UNKNOWN; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_PRESENT: | 
|  | val->intval = acpi_battery_present(battery); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_TECHNOLOGY: | 
|  | val->intval = acpi_battery_technology(battery); | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CYCLE_COUNT: | 
|  | val->intval = battery->cycle_count; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: | 
|  | if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->design_voltage * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 
|  | if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->voltage_now * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CURRENT_NOW: | 
|  | case POWER_SUPPLY_PROP_POWER_NOW: | 
|  | if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->rate_now * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | 
|  | case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: | 
|  | if (!ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->design_capacity * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL: | 
|  | case POWER_SUPPLY_PROP_ENERGY_FULL: | 
|  | if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->full_charge_capacity * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CHARGE_NOW: | 
|  | case POWER_SUPPLY_PROP_ENERGY_NOW: | 
|  | if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->capacity_now * 1000; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CAPACITY: | 
|  | if (ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | 
|  | full_capacity = battery->full_charge_capacity; | 
|  | else if (ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
|  | full_capacity = battery->design_capacity; | 
|  |  | 
|  | if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | 
|  | full_capacity == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | ret = -ENODEV; | 
|  | else | 
|  | val->intval = battery->capacity_now * 100/ | 
|  | full_capacity; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_CAPACITY_LEVEL: | 
|  | if (battery->state & ACPI_BATTERY_STATE_CRITICAL) | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; | 
|  | else if (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | 
|  | (battery->capacity_now <= battery->alarm)) | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; | 
|  | else if (acpi_battery_is_charged(battery)) | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; | 
|  | else | 
|  | val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_MODEL_NAME: | 
|  | val->strval = battery->model_number; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_MANUFACTURER: | 
|  | val->strval = battery->oem_info; | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_SERIAL_NUMBER: | 
|  | val->strval = battery->serial_number; | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static enum power_supply_property charge_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property charge_battery_full_cap_broken_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property energy_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_POWER_NOW, | 
|  | POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_ENERGY_FULL, | 
|  | POWER_SUPPLY_PROP_ENERGY_NOW, | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property energy_battery_full_cap_broken_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_POWER_NOW, | 
|  | POWER_SUPPLY_PROP_ENERGY_NOW, | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | /* -------------------------------------------------------------------------- | 
|  | Battery Management | 
|  | -------------------------------------------------------------------------- */ | 
|  | struct acpi_offsets { | 
|  | size_t offset;		/* offset inside struct acpi_sbs_battery */ | 
|  | u8 mode;		/* int or string? */ | 
|  | }; | 
|  |  | 
|  | static const struct acpi_offsets state_offsets[] = { | 
|  | {offsetof(struct acpi_battery, state), 0}, | 
|  | {offsetof(struct acpi_battery, rate_now), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_now), 0}, | 
|  | {offsetof(struct acpi_battery, voltage_now), 0}, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_offsets info_offsets[] = { | 
|  | {offsetof(struct acpi_battery, power_unit), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, full_charge_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, technology), 0}, | 
|  | {offsetof(struct acpi_battery, design_voltage), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_warning), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_low), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_1), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_2), 0}, | 
|  | {offsetof(struct acpi_battery, model_number), 1}, | 
|  | {offsetof(struct acpi_battery, serial_number), 1}, | 
|  | {offsetof(struct acpi_battery, type), 1}, | 
|  | {offsetof(struct acpi_battery, oem_info), 1}, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_offsets extended_info_offsets[] = { | 
|  | {offsetof(struct acpi_battery, revision), 0}, | 
|  | {offsetof(struct acpi_battery, power_unit), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, full_charge_capacity), 0}, | 
|  | {offsetof(struct acpi_battery, technology), 0}, | 
|  | {offsetof(struct acpi_battery, design_voltage), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_warning), 0}, | 
|  | {offsetof(struct acpi_battery, design_capacity_low), 0}, | 
|  | {offsetof(struct acpi_battery, cycle_count), 0}, | 
|  | {offsetof(struct acpi_battery, measurement_accuracy), 0}, | 
|  | {offsetof(struct acpi_battery, max_sampling_time), 0}, | 
|  | {offsetof(struct acpi_battery, min_sampling_time), 0}, | 
|  | {offsetof(struct acpi_battery, max_averaging_interval), 0}, | 
|  | {offsetof(struct acpi_battery, min_averaging_interval), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_1), 0}, | 
|  | {offsetof(struct acpi_battery, capacity_granularity_2), 0}, | 
|  | {offsetof(struct acpi_battery, model_number), 1}, | 
|  | {offsetof(struct acpi_battery, serial_number), 1}, | 
|  | {offsetof(struct acpi_battery, type), 1}, | 
|  | {offsetof(struct acpi_battery, oem_info), 1}, | 
|  | }; | 
|  |  | 
|  | static int extract_package(struct acpi_battery *battery, | 
|  | union acpi_object *package, | 
|  | const struct acpi_offsets *offsets, int num) | 
|  | { | 
|  | int i; | 
|  | union acpi_object *element; | 
|  | if (package->type != ACPI_TYPE_PACKAGE) | 
|  | return -EFAULT; | 
|  | for (i = 0; i < num; ++i) { | 
|  | if (package->package.count <= i) | 
|  | return -EFAULT; | 
|  | element = &package->package.elements[i]; | 
|  | if (offsets[i].mode) { | 
|  | u8 *ptr = (u8 *)battery + offsets[i].offset; | 
|  | if (element->type == ACPI_TYPE_STRING || | 
|  | element->type == ACPI_TYPE_BUFFER) | 
|  | strncpy(ptr, element->string.pointer, 32); | 
|  | else if (element->type == ACPI_TYPE_INTEGER) { | 
|  | strncpy(ptr, (u8 *)&element->integer.value, | 
|  | sizeof(u64)); | 
|  | ptr[sizeof(u64)] = 0; | 
|  | } else | 
|  | *ptr = 0; /* don't have value */ | 
|  | } else { | 
|  | int *x = (int *)((u8 *)battery + offsets[i].offset); | 
|  | *x = (element->type == ACPI_TYPE_INTEGER) ? | 
|  | element->integer.value : -1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_status(struct acpi_battery *battery) | 
|  | { | 
|  | if (acpi_bus_get_status(battery->device)) { | 
|  | ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA")); | 
|  | return -ENODEV; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int extract_battery_info(const int use_bix, | 
|  | struct acpi_battery *battery, | 
|  | const struct acpi_buffer *buffer) | 
|  | { | 
|  | int result = -EFAULT; | 
|  |  | 
|  | if (use_bix && battery_bix_broken_package) | 
|  | result = extract_package(battery, buffer->pointer, | 
|  | extended_info_offsets + 1, | 
|  | ARRAY_SIZE(extended_info_offsets) - 1); | 
|  | else if (use_bix) | 
|  | result = extract_package(battery, buffer->pointer, | 
|  | extended_info_offsets, | 
|  | ARRAY_SIZE(extended_info_offsets)); | 
|  | else | 
|  | result = extract_package(battery, buffer->pointer, | 
|  | info_offsets, ARRAY_SIZE(info_offsets)); | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | 
|  | battery->full_charge_capacity = battery->design_capacity; | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | 
|  | battery->power_unit && battery->design_voltage) { | 
|  | battery->design_capacity = battery->design_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->full_charge_capacity = battery->full_charge_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->design_capacity_warning = | 
|  | battery->design_capacity_warning * | 
|  | 10000 / battery->design_voltage; | 
|  | /* Curiously, design_capacity_low, unlike the rest of them, | 
|  | is correct.  */ | 
|  | /* capacity_granularity_* equal 1 on the systems tested, so | 
|  | it's impossible to tell if they would need an adjustment | 
|  | or not if their values were higher.  */ | 
|  | } | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | 
|  | battery->capacity_now > battery->full_charge_capacity) | 
|  | battery->capacity_now = battery->full_charge_capacity; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_info(struct acpi_battery *battery) | 
|  | { | 
|  | const int xinfo = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | 
|  | int use_bix; | 
|  | int result = -ENODEV; | 
|  |  | 
|  | if (!acpi_battery_present(battery)) | 
|  | return 0; | 
|  |  | 
|  |  | 
|  | for (use_bix = xinfo ? 1 : 0; use_bix >= 0; use_bix--) { | 
|  | struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
|  | acpi_status status = AE_ERROR; | 
|  |  | 
|  | mutex_lock(&battery->lock); | 
|  | status = acpi_evaluate_object(battery->device->handle, | 
|  | use_bix ? "_BIX":"_BIF", | 
|  | NULL, &buffer); | 
|  | mutex_unlock(&battery->lock); | 
|  |  | 
|  | if (ACPI_FAILURE(status)) { | 
|  | ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s", | 
|  | use_bix ? "_BIX":"_BIF")); | 
|  | } else { | 
|  | result = extract_battery_info(use_bix, | 
|  | battery, | 
|  | &buffer); | 
|  |  | 
|  | kfree(buffer.pointer); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!result && !use_bix && xinfo) | 
|  | pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n"); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_get_state(struct acpi_battery *battery) | 
|  | { | 
|  | int result = 0; | 
|  | acpi_status status = 0; | 
|  | struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
|  |  | 
|  | if (!acpi_battery_present(battery)) | 
|  | return 0; | 
|  |  | 
|  | if (battery->update_time && | 
|  | time_before(jiffies, battery->update_time + | 
|  | msecs_to_jiffies(cache_time))) | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&battery->lock); | 
|  | status = acpi_evaluate_object(battery->device->handle, "_BST", | 
|  | NULL, &buffer); | 
|  | mutex_unlock(&battery->lock); | 
|  |  | 
|  | if (ACPI_FAILURE(status)) { | 
|  | ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BST")); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | result = extract_package(battery, buffer.pointer, | 
|  | state_offsets, ARRAY_SIZE(state_offsets)); | 
|  | battery->update_time = jiffies; | 
|  | kfree(buffer.pointer); | 
|  |  | 
|  | /* For buggy DSDTs that report negative 16-bit values for either | 
|  | * charging or discharging current and/or report 0 as 65536 | 
|  | * due to bad math. | 
|  | */ | 
|  | if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA && | 
|  | battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN && | 
|  | (s16)(battery->rate_now) < 0) { | 
|  | battery->rate_now = abs((s16)battery->rate_now); | 
|  | pr_warn_once(FW_BUG "battery: (dis)charge rate invalid.\n"); | 
|  | } | 
|  |  | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags) | 
|  | && battery->capacity_now >= 0 && battery->capacity_now <= 100) | 
|  | battery->capacity_now = (battery->capacity_now * | 
|  | battery->full_charge_capacity) / 100; | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | 
|  | battery->power_unit && battery->design_voltage) { | 
|  | battery->capacity_now = battery->capacity_now * | 
|  | 10000 / battery->design_voltage; | 
|  | } | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | 
|  | battery->capacity_now > battery->full_charge_capacity) | 
|  | battery->capacity_now = battery->full_charge_capacity; | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_set_alarm(struct acpi_battery *battery) | 
|  | { | 
|  | acpi_status status = 0; | 
|  |  | 
|  | if (!acpi_battery_present(battery) || | 
|  | !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags)) | 
|  | return -ENODEV; | 
|  |  | 
|  | mutex_lock(&battery->lock); | 
|  | status = acpi_execute_simple_method(battery->device->handle, "_BTP", | 
|  | battery->alarm); | 
|  | mutex_unlock(&battery->lock); | 
|  |  | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -ENODEV; | 
|  |  | 
|  | ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Alarm set to %d\n", battery->alarm)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_init_alarm(struct acpi_battery *battery) | 
|  | { | 
|  | /* See if alarms are supported, and if so, set default */ | 
|  | if (!acpi_has_method(battery->device->handle, "_BTP")) { | 
|  | clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | 
|  | return 0; | 
|  | } | 
|  | set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | 
|  | if (!battery->alarm) | 
|  | battery->alarm = battery->design_capacity_warning; | 
|  | return acpi_battery_set_alarm(battery); | 
|  | } | 
|  |  | 
|  | static ssize_t acpi_battery_alarm_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | 
|  | return sprintf(buf, "%d\n", battery->alarm * 1000); | 
|  | } | 
|  |  | 
|  | static ssize_t acpi_battery_alarm_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | unsigned long x; | 
|  | struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | 
|  | if (sscanf(buf, "%lu\n", &x) == 1) | 
|  | battery->alarm = x/1000; | 
|  | if (acpi_battery_present(battery)) | 
|  | acpi_battery_set_alarm(battery); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static const struct device_attribute alarm_attr = { | 
|  | .attr = {.name = "alarm", .mode = 0644}, | 
|  | .show = acpi_battery_alarm_show, | 
|  | .store = acpi_battery_alarm_store, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The Battery Hooking API | 
|  | * | 
|  | * This API is used inside other drivers that need to expose | 
|  | * platform-specific behaviour within the generic driver in a | 
|  | * generic way. | 
|  | * | 
|  | */ | 
|  |  | 
|  | static LIST_HEAD(acpi_battery_list); | 
|  | static LIST_HEAD(battery_hook_list); | 
|  | static DEFINE_MUTEX(hook_mutex); | 
|  |  | 
|  | static void __battery_hook_unregister(struct acpi_battery_hook *hook, int lock) | 
|  | { | 
|  | struct acpi_battery *battery; | 
|  | /* | 
|  | * In order to remove a hook, we first need to | 
|  | * de-register all the batteries that are registered. | 
|  | */ | 
|  | if (lock) | 
|  | mutex_lock(&hook_mutex); | 
|  | list_for_each_entry(battery, &acpi_battery_list, list) { | 
|  | hook->remove_battery(battery->bat); | 
|  | } | 
|  | list_del(&hook->list); | 
|  | if (lock) | 
|  | mutex_unlock(&hook_mutex); | 
|  | pr_info("extension unregistered: %s\n", hook->name); | 
|  | } | 
|  |  | 
|  | void battery_hook_unregister(struct acpi_battery_hook *hook) | 
|  | { | 
|  | __battery_hook_unregister(hook, 1); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(battery_hook_unregister); | 
|  |  | 
|  | void battery_hook_register(struct acpi_battery_hook *hook) | 
|  | { | 
|  | struct acpi_battery *battery; | 
|  |  | 
|  | mutex_lock(&hook_mutex); | 
|  | INIT_LIST_HEAD(&hook->list); | 
|  | list_add(&hook->list, &battery_hook_list); | 
|  | /* | 
|  | * Now that the driver is registered, we need | 
|  | * to notify the hook that a battery is available | 
|  | * for each battery, so that the driver may add | 
|  | * its attributes. | 
|  | */ | 
|  | list_for_each_entry(battery, &acpi_battery_list, list) { | 
|  | if (hook->add_battery(battery->bat)) { | 
|  | /* | 
|  | * If a add-battery returns non-zero, | 
|  | * the registration of the extension has failed, | 
|  | * and we will not add it to the list of loaded | 
|  | * hooks. | 
|  | */ | 
|  | pr_err("extension failed to load: %s", hook->name); | 
|  | __battery_hook_unregister(hook, 0); | 
|  | goto end; | 
|  | } | 
|  | } | 
|  | pr_info("new extension: %s\n", hook->name); | 
|  | end: | 
|  | mutex_unlock(&hook_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(battery_hook_register); | 
|  |  | 
|  | /* | 
|  | * This function gets called right after the battery sysfs | 
|  | * attributes have been added, so that the drivers that | 
|  | * define custom sysfs attributes can add their own. | 
|  | */ | 
|  | static void battery_hook_add_battery(struct acpi_battery *battery) | 
|  | { | 
|  | struct acpi_battery_hook *hook_node, *tmp; | 
|  |  | 
|  | mutex_lock(&hook_mutex); | 
|  | INIT_LIST_HEAD(&battery->list); | 
|  | list_add(&battery->list, &acpi_battery_list); | 
|  | /* | 
|  | * Since we added a new battery to the list, we need to | 
|  | * iterate over the hooks and call add_battery for each | 
|  | * hook that was registered. This usually happens | 
|  | * when a battery gets hotplugged or initialized | 
|  | * during the battery module initialization. | 
|  | */ | 
|  | list_for_each_entry_safe(hook_node, tmp, &battery_hook_list, list) { | 
|  | if (hook_node->add_battery(battery->bat)) { | 
|  | /* | 
|  | * The notification of the extensions has failed, to | 
|  | * prevent further errors we will unload the extension. | 
|  | */ | 
|  | pr_err("error in extension, unloading: %s", | 
|  | hook_node->name); | 
|  | __battery_hook_unregister(hook_node, 0); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&hook_mutex); | 
|  | } | 
|  |  | 
|  | static void battery_hook_remove_battery(struct acpi_battery *battery) | 
|  | { | 
|  | struct acpi_battery_hook *hook; | 
|  |  | 
|  | mutex_lock(&hook_mutex); | 
|  | /* | 
|  | * Before removing the hook, we need to remove all | 
|  | * custom attributes from the battery. | 
|  | */ | 
|  | list_for_each_entry(hook, &battery_hook_list, list) { | 
|  | hook->remove_battery(battery->bat); | 
|  | } | 
|  | /* Then, just remove the battery from the list */ | 
|  | list_del(&battery->list); | 
|  | mutex_unlock(&hook_mutex); | 
|  | } | 
|  |  | 
|  | static void __exit battery_hook_exit(void) | 
|  | { | 
|  | struct acpi_battery_hook *hook; | 
|  | struct acpi_battery_hook *ptr; | 
|  | /* | 
|  | * At this point, the acpi_bus_unregister_driver() | 
|  | * has called remove for all batteries. We just | 
|  | * need to remove the hooks. | 
|  | */ | 
|  | list_for_each_entry_safe(hook, ptr, &battery_hook_list, list) { | 
|  | __battery_hook_unregister(hook, 1); | 
|  | } | 
|  | mutex_destroy(&hook_mutex); | 
|  | } | 
|  |  | 
|  | static int sysfs_add_battery(struct acpi_battery *battery) | 
|  | { | 
|  | struct power_supply_config psy_cfg = { .drv_data = battery, }; | 
|  | bool full_cap_broken = false; | 
|  |  | 
|  | if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | 
|  | !ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
|  | full_cap_broken = true; | 
|  |  | 
|  | if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) { | 
|  | if (full_cap_broken) { | 
|  | battery->bat_desc.properties = | 
|  | charge_battery_full_cap_broken_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(charge_battery_full_cap_broken_props); | 
|  | } else { | 
|  | battery->bat_desc.properties = charge_battery_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(charge_battery_props); | 
|  | } | 
|  | } else { | 
|  | if (full_cap_broken) { | 
|  | battery->bat_desc.properties = | 
|  | energy_battery_full_cap_broken_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(energy_battery_full_cap_broken_props); | 
|  | } else { | 
|  | battery->bat_desc.properties = energy_battery_props; | 
|  | battery->bat_desc.num_properties = | 
|  | ARRAY_SIZE(energy_battery_props); | 
|  | } | 
|  | } | 
|  |  | 
|  | battery->bat_desc.name = acpi_device_bid(battery->device); | 
|  | battery->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY; | 
|  | battery->bat_desc.get_property = acpi_battery_get_property; | 
|  |  | 
|  | battery->bat = power_supply_register_no_ws(&battery->device->dev, | 
|  | &battery->bat_desc, &psy_cfg); | 
|  |  | 
|  | if (IS_ERR(battery->bat)) { | 
|  | int result = PTR_ERR(battery->bat); | 
|  |  | 
|  | battery->bat = NULL; | 
|  | return result; | 
|  | } | 
|  | battery_hook_add_battery(battery); | 
|  | return device_create_file(&battery->bat->dev, &alarm_attr); | 
|  | } | 
|  |  | 
|  | static void sysfs_remove_battery(struct acpi_battery *battery) | 
|  | { | 
|  | mutex_lock(&battery->sysfs_lock); | 
|  | if (!battery->bat) { | 
|  | mutex_unlock(&battery->sysfs_lock); | 
|  | return; | 
|  | } | 
|  | battery_hook_remove_battery(battery); | 
|  | device_remove_file(&battery->bat->dev, &alarm_attr); | 
|  | power_supply_unregister(battery->bat); | 
|  | battery->bat = NULL; | 
|  | mutex_unlock(&battery->sysfs_lock); | 
|  | } | 
|  |  | 
|  | static void find_battery(const struct dmi_header *dm, void *private) | 
|  | { | 
|  | struct acpi_battery *battery = (struct acpi_battery *)private; | 
|  | /* Note: the hardcoded offsets below have been extracted from | 
|  | the source code of dmidecode.  */ | 
|  | if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) { | 
|  | const u8 *dmi_data = (const u8 *)(dm + 1); | 
|  | int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6)); | 
|  | if (dm->length >= 18) | 
|  | dmi_capacity *= dmi_data[17]; | 
|  | if (battery->design_capacity * battery->design_voltage / 1000 | 
|  | != dmi_capacity && | 
|  | battery->design_capacity * 10 == dmi_capacity) | 
|  | set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
|  | &battery->flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * According to the ACPI spec, some kinds of primary batteries can | 
|  | * report percentage battery remaining capacity directly to OS. | 
|  | * In this case, it reports the Last Full Charged Capacity == 100 | 
|  | * and BatteryPresentRate == 0xFFFFFFFF. | 
|  | * | 
|  | * Now we found some battery reports percentage remaining capacity | 
|  | * even if it's rechargeable. | 
|  | * https://bugzilla.kernel.org/show_bug.cgi?id=15979 | 
|  | * | 
|  | * Handle this correctly so that they won't break userspace. | 
|  | */ | 
|  | static void acpi_battery_quirks(struct acpi_battery *battery) | 
|  | { | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | 
|  | return; | 
|  |  | 
|  | if (battery->full_charge_capacity == 100 && | 
|  | battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && | 
|  | battery->capacity_now >= 0 && battery->capacity_now <= 100) { | 
|  | set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags); | 
|  | battery->full_charge_capacity = battery->design_capacity; | 
|  | battery->capacity_now = (battery->capacity_now * | 
|  | battery->full_charge_capacity) / 100; | 
|  | } | 
|  |  | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags)) | 
|  | return; | 
|  |  | 
|  | if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { | 
|  | const char *s; | 
|  | s = dmi_get_system_info(DMI_PRODUCT_VERSION); | 
|  | if (s && !strncasecmp(s, "ThinkPad", 8)) { | 
|  | dmi_walk(find_battery, battery); | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
|  | &battery->flags) && | 
|  | battery->design_voltage) { | 
|  | battery->design_capacity = | 
|  | battery->design_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->full_charge_capacity = | 
|  | battery->full_charge_capacity * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->design_capacity_warning = | 
|  | battery->design_capacity_warning * | 
|  | 10000 / battery->design_voltage; | 
|  | battery->capacity_now = battery->capacity_now * | 
|  | 10000 / battery->design_voltage; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags)) | 
|  | return; | 
|  |  | 
|  | if (acpi_battery_is_degraded(battery) && | 
|  | battery->capacity_now > battery->full_charge_capacity) { | 
|  | set_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags); | 
|  | battery->capacity_now = battery->full_charge_capacity; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int acpi_battery_update(struct acpi_battery *battery, bool resume) | 
|  | { | 
|  | int result = acpi_battery_get_status(battery); | 
|  |  | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | if (!acpi_battery_present(battery)) { | 
|  | sysfs_remove_battery(battery); | 
|  | battery->update_time = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (resume) | 
|  | return 0; | 
|  |  | 
|  | if (!battery->update_time) { | 
|  | result = acpi_battery_get_info(battery); | 
|  | if (result) | 
|  | return result; | 
|  | acpi_battery_init_alarm(battery); | 
|  | } | 
|  |  | 
|  | result = acpi_battery_get_state(battery); | 
|  | if (result) | 
|  | return result; | 
|  | acpi_battery_quirks(battery); | 
|  |  | 
|  | if (!battery->bat) { | 
|  | result = sysfs_add_battery(battery); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Wakeup the system if battery is critical low | 
|  | * or lower than the alarm level | 
|  | */ | 
|  | if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) || | 
|  | (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | 
|  | (battery->capacity_now <= battery->alarm))) | 
|  | acpi_pm_wakeup_event(&battery->device->dev); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void acpi_battery_refresh(struct acpi_battery *battery) | 
|  | { | 
|  | int power_unit; | 
|  |  | 
|  | if (!battery->bat) | 
|  | return; | 
|  |  | 
|  | power_unit = battery->power_unit; | 
|  |  | 
|  | acpi_battery_get_info(battery); | 
|  |  | 
|  | if (power_unit == battery->power_unit) | 
|  | return; | 
|  |  | 
|  | /* The battery has changed its reporting units. */ | 
|  | sysfs_remove_battery(battery); | 
|  | sysfs_add_battery(battery); | 
|  | } | 
|  |  | 
|  | /* -------------------------------------------------------------------------- | 
|  | FS Interface (/proc) | 
|  | -------------------------------------------------------------------------- */ | 
|  |  | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | static struct proc_dir_entry *acpi_battery_dir; | 
|  |  | 
|  | static const char *acpi_battery_units(const struct acpi_battery *battery) | 
|  | { | 
|  | return (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) ? | 
|  | "mA" : "mW"; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_info_proc_show(struct seq_file *seq, void *offset) | 
|  | { | 
|  | struct acpi_battery *battery = seq->private; | 
|  | int result = acpi_battery_update(battery, false); | 
|  |  | 
|  | if (result) | 
|  | goto end; | 
|  |  | 
|  | seq_printf(seq, "present:                 %s\n", | 
|  | acpi_battery_present(battery) ? "yes" : "no"); | 
|  | if (!acpi_battery_present(battery)) | 
|  | goto end; | 
|  | if (battery->design_capacity == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | seq_printf(seq, "design capacity:         unknown\n"); | 
|  | else | 
|  | seq_printf(seq, "design capacity:         %d %sh\n", | 
|  | battery->design_capacity, | 
|  | acpi_battery_units(battery)); | 
|  |  | 
|  | if (battery->full_charge_capacity == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | seq_printf(seq, "last full capacity:      unknown\n"); | 
|  | else | 
|  | seq_printf(seq, "last full capacity:      %d %sh\n", | 
|  | battery->full_charge_capacity, | 
|  | acpi_battery_units(battery)); | 
|  |  | 
|  | seq_printf(seq, "battery technology:      %srechargeable\n", | 
|  | battery->technology ? "" : "non-"); | 
|  |  | 
|  | if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | seq_printf(seq, "design voltage:          unknown\n"); | 
|  | else | 
|  | seq_printf(seq, "design voltage:          %d mV\n", | 
|  | battery->design_voltage); | 
|  | seq_printf(seq, "design capacity warning: %d %sh\n", | 
|  | battery->design_capacity_warning, | 
|  | acpi_battery_units(battery)); | 
|  | seq_printf(seq, "design capacity low:     %d %sh\n", | 
|  | battery->design_capacity_low, | 
|  | acpi_battery_units(battery)); | 
|  | seq_printf(seq, "cycle count:		  %i\n", battery->cycle_count); | 
|  | seq_printf(seq, "capacity granularity 1:  %d %sh\n", | 
|  | battery->capacity_granularity_1, | 
|  | acpi_battery_units(battery)); | 
|  | seq_printf(seq, "capacity granularity 2:  %d %sh\n", | 
|  | battery->capacity_granularity_2, | 
|  | acpi_battery_units(battery)); | 
|  | seq_printf(seq, "model number:            %s\n", battery->model_number); | 
|  | seq_printf(seq, "serial number:           %s\n", battery->serial_number); | 
|  | seq_printf(seq, "battery type:            %s\n", battery->type); | 
|  | seq_printf(seq, "OEM info:                %s\n", battery->oem_info); | 
|  | end: | 
|  | if (result) | 
|  | seq_printf(seq, "ERROR: Unable to read battery info\n"); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_state_proc_show(struct seq_file *seq, void *offset) | 
|  | { | 
|  | struct acpi_battery *battery = seq->private; | 
|  | int result = acpi_battery_update(battery, false); | 
|  |  | 
|  | if (result) | 
|  | goto end; | 
|  |  | 
|  | seq_printf(seq, "present:                 %s\n", | 
|  | acpi_battery_present(battery) ? "yes" : "no"); | 
|  | if (!acpi_battery_present(battery)) | 
|  | goto end; | 
|  |  | 
|  | seq_printf(seq, "capacity state:          %s\n", | 
|  | (battery->state & 0x04) ? "critical" : "ok"); | 
|  | if ((battery->state & 0x01) && (battery->state & 0x02)) | 
|  | seq_printf(seq, | 
|  | "charging state:          charging/discharging\n"); | 
|  | else if (battery->state & 0x01) | 
|  | seq_printf(seq, "charging state:          discharging\n"); | 
|  | else if (battery->state & 0x02) | 
|  | seq_printf(seq, "charging state:          charging\n"); | 
|  | else | 
|  | seq_printf(seq, "charging state:          charged\n"); | 
|  |  | 
|  | if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | seq_printf(seq, "present rate:            unknown\n"); | 
|  | else | 
|  | seq_printf(seq, "present rate:            %d %s\n", | 
|  | battery->rate_now, acpi_battery_units(battery)); | 
|  |  | 
|  | if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | seq_printf(seq, "remaining capacity:      unknown\n"); | 
|  | else | 
|  | seq_printf(seq, "remaining capacity:      %d %sh\n", | 
|  | battery->capacity_now, acpi_battery_units(battery)); | 
|  | if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
|  | seq_printf(seq, "present voltage:         unknown\n"); | 
|  | else | 
|  | seq_printf(seq, "present voltage:         %d mV\n", | 
|  | battery->voltage_now); | 
|  | end: | 
|  | if (result) | 
|  | seq_printf(seq, "ERROR: Unable to read battery state\n"); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_alarm_proc_show(struct seq_file *seq, void *offset) | 
|  | { | 
|  | struct acpi_battery *battery = seq->private; | 
|  | int result = acpi_battery_update(battery, false); | 
|  |  | 
|  | if (result) | 
|  | goto end; | 
|  |  | 
|  | if (!acpi_battery_present(battery)) { | 
|  | seq_printf(seq, "present:                 no\n"); | 
|  | goto end; | 
|  | } | 
|  | seq_printf(seq, "alarm:                   "); | 
|  | if (battery->alarm) { | 
|  | seq_printf(seq, "%u %sh\n", battery->alarm, | 
|  | acpi_battery_units(battery)); | 
|  | } else { | 
|  | seq_printf(seq, "unsupported\n"); | 
|  | } | 
|  | end: | 
|  | if (result) | 
|  | seq_printf(seq, "ERROR: Unable to read battery alarm\n"); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static ssize_t acpi_battery_write_alarm(struct file *file, | 
|  | const char __user * buffer, | 
|  | size_t count, loff_t * ppos) | 
|  | { | 
|  | int result = 0; | 
|  | char alarm_string[12] = { '\0' }; | 
|  | struct seq_file *m = file->private_data; | 
|  | struct acpi_battery *battery = m->private; | 
|  |  | 
|  | if (!battery || (count > sizeof(alarm_string) - 1)) | 
|  | return -EINVAL; | 
|  | if (!acpi_battery_present(battery)) { | 
|  | result = -ENODEV; | 
|  | goto end; | 
|  | } | 
|  | if (copy_from_user(alarm_string, buffer, count)) { | 
|  | result = -EFAULT; | 
|  | goto end; | 
|  | } | 
|  | alarm_string[count] = '\0'; | 
|  | if (kstrtoint(alarm_string, 0, &battery->alarm)) { | 
|  | result = -EINVAL; | 
|  | goto end; | 
|  | } | 
|  | result = acpi_battery_set_alarm(battery); | 
|  | end: | 
|  | if (result) | 
|  | return result; | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_alarm_proc_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, acpi_battery_alarm_proc_show, PDE_DATA(inode)); | 
|  | } | 
|  |  | 
|  | static const struct proc_ops acpi_battery_alarm_proc_ops = { | 
|  | .proc_open	= acpi_battery_alarm_proc_open, | 
|  | .proc_read	= seq_read, | 
|  | .proc_write	= acpi_battery_write_alarm, | 
|  | .proc_lseek	= seq_lseek, | 
|  | .proc_release	= single_release, | 
|  | }; | 
|  |  | 
|  | static int acpi_battery_add_fs(struct acpi_device *device) | 
|  | { | 
|  | pr_warn(PREFIX "Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); | 
|  | if (!acpi_device_dir(device)) { | 
|  | acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), | 
|  | acpi_battery_dir); | 
|  | if (!acpi_device_dir(device)) | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!proc_create_single_data("info", S_IRUGO, acpi_device_dir(device), | 
|  | acpi_battery_info_proc_show, acpi_driver_data(device))) | 
|  | return -ENODEV; | 
|  | if (!proc_create_single_data("state", S_IRUGO, acpi_device_dir(device), | 
|  | acpi_battery_state_proc_show, acpi_driver_data(device))) | 
|  | return -ENODEV; | 
|  | if (!proc_create_data("alarm", S_IFREG | S_IRUGO | S_IWUSR, | 
|  | acpi_device_dir(device), &acpi_battery_alarm_proc_ops, | 
|  | acpi_driver_data(device))) | 
|  | return -ENODEV; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void acpi_battery_remove_fs(struct acpi_device *device) | 
|  | { | 
|  | if (!acpi_device_dir(device)) | 
|  | return; | 
|  | remove_proc_subtree(acpi_device_bid(device), acpi_battery_dir); | 
|  | acpi_device_dir(device) = NULL; | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | /* -------------------------------------------------------------------------- | 
|  | Driver Interface | 
|  | -------------------------------------------------------------------------- */ | 
|  |  | 
|  | static void acpi_battery_notify(struct acpi_device *device, u32 event) | 
|  | { | 
|  | struct acpi_battery *battery = acpi_driver_data(device); | 
|  | struct power_supply *old; | 
|  |  | 
|  | if (!battery) | 
|  | return; | 
|  | old = battery->bat; | 
|  | /* | 
|  | * On Acer Aspire V5-573G notifications are sometimes triggered too | 
|  | * early. For example, when AC is unplugged and notification is | 
|  | * triggered, battery state is still reported as "Full", and changes to | 
|  | * "Discharging" only after short delay, without any notification. | 
|  | */ | 
|  | if (battery_notification_delay_ms > 0) | 
|  | msleep(battery_notification_delay_ms); | 
|  | if (event == ACPI_BATTERY_NOTIFY_INFO) | 
|  | acpi_battery_refresh(battery); | 
|  | acpi_battery_update(battery, false); | 
|  | acpi_bus_generate_netlink_event(device->pnp.device_class, | 
|  | dev_name(&device->dev), event, | 
|  | acpi_battery_present(battery)); | 
|  | acpi_notifier_call_chain(device, event, acpi_battery_present(battery)); | 
|  | /* acpi_battery_update could remove power_supply object */ | 
|  | if (old && battery->bat) | 
|  | power_supply_changed(battery->bat); | 
|  | } | 
|  |  | 
|  | static int battery_notify(struct notifier_block *nb, | 
|  | unsigned long mode, void *_unused) | 
|  | { | 
|  | struct acpi_battery *battery = container_of(nb, struct acpi_battery, | 
|  | pm_nb); | 
|  | int result; | 
|  |  | 
|  | switch (mode) { | 
|  | case PM_POST_HIBERNATION: | 
|  | case PM_POST_SUSPEND: | 
|  | if (!acpi_battery_present(battery)) | 
|  | return 0; | 
|  |  | 
|  | if (battery->bat) { | 
|  | acpi_battery_refresh(battery); | 
|  | } else { | 
|  | result = acpi_battery_get_info(battery); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | result = sysfs_add_battery(battery); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | acpi_battery_init_alarm(battery); | 
|  | acpi_battery_get_state(battery); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | battery_bix_broken_package_quirk(const struct dmi_system_id *d) | 
|  | { | 
|  | battery_bix_broken_package = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | battery_notification_delay_quirk(const struct dmi_system_id *d) | 
|  | { | 
|  | battery_notification_delay_ms = 1000; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | battery_ac_is_broken_quirk(const struct dmi_system_id *d) | 
|  | { | 
|  | battery_ac_is_broken = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init | 
|  | battery_do_not_check_pmic_quirk(const struct dmi_system_id *d) | 
|  | { | 
|  | battery_check_pmic = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dmi_system_id bat_dmi_table[] __initconst = { | 
|  | { | 
|  | /* NEC LZ750/LS */ | 
|  | .callback = battery_bix_broken_package_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "NEC"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "PC-LZ750LS"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | /* Acer Aspire V5-573G */ | 
|  | .callback = battery_notification_delay_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "Acer"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | /* Point of View mobii wintab p800w */ | 
|  | .callback = battery_ac_is_broken_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), | 
|  | DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), | 
|  | DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1013"), | 
|  | /* Above matches are too generic, add bios-date match */ | 
|  | DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | /* ECS EF20EA, AXP288 PMIC but uses separate fuel-gauge */ | 
|  | .callback = battery_do_not_check_pmic_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"), | 
|  | }, | 
|  | }, | 
|  | { | 
|  | /* Lenovo Ideapad Miix 320, AXP288 PMIC, separate fuel-gauge */ | 
|  | .callback = battery_do_not_check_pmic_quirk, | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "80XF"), | 
|  | DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"), | 
|  | }, | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Some machines'(E,G Lenovo Z480) ECs are not stable | 
|  | * during boot up and this causes battery driver fails to be | 
|  | * probed due to failure of getting battery information | 
|  | * from EC sometimes. After several retries, the operation | 
|  | * may work. So add retry code here and 20ms sleep between | 
|  | * every retries. | 
|  | */ | 
|  | static int acpi_battery_update_retry(struct acpi_battery *battery) | 
|  | { | 
|  | int retry, ret; | 
|  |  | 
|  | for (retry = 5; retry; retry--) { | 
|  | ret = acpi_battery_update(battery, false); | 
|  | if (!ret) | 
|  | break; | 
|  |  | 
|  | msleep(20); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_add(struct acpi_device *device) | 
|  | { | 
|  | int result = 0; | 
|  | struct acpi_battery *battery = NULL; | 
|  |  | 
|  | if (!device) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (device->dep_unmet) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL); | 
|  | if (!battery) | 
|  | return -ENOMEM; | 
|  | battery->device = device; | 
|  | strcpy(acpi_device_name(device), ACPI_BATTERY_DEVICE_NAME); | 
|  | strcpy(acpi_device_class(device), ACPI_BATTERY_CLASS); | 
|  | device->driver_data = battery; | 
|  | mutex_init(&battery->lock); | 
|  | mutex_init(&battery->sysfs_lock); | 
|  | if (acpi_has_method(battery->device->handle, "_BIX")) | 
|  | set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | 
|  |  | 
|  | result = acpi_battery_update_retry(battery); | 
|  | if (result) | 
|  | goto fail; | 
|  |  | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | result = acpi_battery_add_fs(device); | 
|  | if (result) { | 
|  | acpi_battery_remove_fs(device); | 
|  | goto fail; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | pr_info(PREFIX "%s Slot [%s] (battery %s)\n", | 
|  | ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device), | 
|  | device->status.battery_present ? "present" : "absent"); | 
|  |  | 
|  | battery->pm_nb.notifier_call = battery_notify; | 
|  | register_pm_notifier(&battery->pm_nb); | 
|  |  | 
|  | device_init_wakeup(&device->dev, 1); | 
|  |  | 
|  | return result; | 
|  |  | 
|  | fail: | 
|  | sysfs_remove_battery(battery); | 
|  | mutex_destroy(&battery->lock); | 
|  | mutex_destroy(&battery->sysfs_lock); | 
|  | kfree(battery); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int acpi_battery_remove(struct acpi_device *device) | 
|  | { | 
|  | struct acpi_battery *battery = NULL; | 
|  |  | 
|  | if (!device || !acpi_driver_data(device)) | 
|  | return -EINVAL; | 
|  | device_init_wakeup(&device->dev, 0); | 
|  | battery = acpi_driver_data(device); | 
|  | unregister_pm_notifier(&battery->pm_nb); | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | acpi_battery_remove_fs(device); | 
|  | #endif | 
|  | sysfs_remove_battery(battery); | 
|  | mutex_destroy(&battery->lock); | 
|  | mutex_destroy(&battery->sysfs_lock); | 
|  | kfree(battery); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | /* this is needed to learn about changes made in suspended state */ | 
|  | static int acpi_battery_resume(struct device *dev) | 
|  | { | 
|  | struct acpi_battery *battery; | 
|  |  | 
|  | if (!dev) | 
|  | return -EINVAL; | 
|  |  | 
|  | battery = acpi_driver_data(to_acpi_device(dev)); | 
|  | if (!battery) | 
|  | return -EINVAL; | 
|  |  | 
|  | battery->update_time = 0; | 
|  | acpi_battery_update(battery, true); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define acpi_battery_resume NULL | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume); | 
|  |  | 
|  | static struct acpi_driver acpi_battery_driver = { | 
|  | .name = "battery", | 
|  | .class = ACPI_BATTERY_CLASS, | 
|  | .ids = battery_device_ids, | 
|  | .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, | 
|  | .ops = { | 
|  | .add = acpi_battery_add, | 
|  | .remove = acpi_battery_remove, | 
|  | .notify = acpi_battery_notify, | 
|  | }, | 
|  | .drv.pm = &acpi_battery_pm, | 
|  | }; | 
|  |  | 
|  | static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie) | 
|  | { | 
|  | unsigned int i; | 
|  | int result; | 
|  |  | 
|  | dmi_check_system(bat_dmi_table); | 
|  |  | 
|  | if (battery_check_pmic) { | 
|  | for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++) | 
|  | if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) { | 
|  | pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME | 
|  | ": found native %s PMIC, not loading\n", | 
|  | acpi_battery_blacklist[i]); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | acpi_battery_dir = acpi_lock_battery_dir(); | 
|  | if (!acpi_battery_dir) | 
|  | return; | 
|  | #endif | 
|  | result = acpi_bus_register_driver(&acpi_battery_driver); | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | if (result < 0) | 
|  | acpi_unlock_battery_dir(acpi_battery_dir); | 
|  | #endif | 
|  | battery_driver_registered = (result == 0); | 
|  | } | 
|  |  | 
|  | static int __init acpi_battery_init(void) | 
|  | { | 
|  | if (acpi_disabled) | 
|  | return -ENODEV; | 
|  |  | 
|  | async_cookie = async_schedule(acpi_battery_init_async, NULL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit acpi_battery_exit(void) | 
|  | { | 
|  | async_synchronize_cookie(async_cookie + 1); | 
|  | if (battery_driver_registered) { | 
|  | acpi_bus_unregister_driver(&acpi_battery_driver); | 
|  | battery_hook_exit(); | 
|  | } | 
|  | #ifdef CONFIG_ACPI_PROCFS_POWER | 
|  | if (acpi_battery_dir) | 
|  | acpi_unlock_battery_dir(acpi_battery_dir); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | module_init(acpi_battery_init); | 
|  | module_exit(acpi_battery_exit); |