|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * SMP support for J2 processor | 
|  | * | 
|  | * Copyright (C) 2015-2016 Smart Energy Instruments, Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/smp.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <asm/cmpxchg.h> | 
|  |  | 
|  | DEFINE_PER_CPU(unsigned, j2_ipi_messages); | 
|  |  | 
|  | extern u32 *sh2_cpuid_addr; | 
|  | static u32 *j2_ipi_trigger; | 
|  | static int j2_ipi_irq; | 
|  |  | 
|  | static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg) | 
|  | { | 
|  | unsigned cpu = hard_smp_processor_id(); | 
|  | volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu); | 
|  | unsigned messages, i; | 
|  |  | 
|  | do messages = *pmsg; | 
|  | while (cmpxchg(pmsg, messages, 0) != messages); | 
|  |  | 
|  | if (!messages) return IRQ_NONE; | 
|  |  | 
|  | for (i=0; i<SMP_MSG_NR; i++) | 
|  | if (messages & (1U<<i)) | 
|  | smp_message_recv(i); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void j2_smp_setup(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void j2_prepare_cpus(unsigned int max_cpus) | 
|  | { | 
|  | struct device_node *np; | 
|  | unsigned i, max = 1; | 
|  |  | 
|  | np = of_find_compatible_node(NULL, NULL, "jcore,ipi-controller"); | 
|  | if (!np) | 
|  | goto out; | 
|  |  | 
|  | j2_ipi_irq = irq_of_parse_and_map(np, 0); | 
|  | j2_ipi_trigger = of_iomap(np, 0); | 
|  | if (!j2_ipi_irq || !j2_ipi_trigger) | 
|  | goto out; | 
|  |  | 
|  | np = of_find_compatible_node(NULL, NULL, "jcore,cpuid-mmio"); | 
|  | if (!np) | 
|  | goto out; | 
|  |  | 
|  | sh2_cpuid_addr = of_iomap(np, 0); | 
|  | if (!sh2_cpuid_addr) | 
|  | goto out; | 
|  |  | 
|  | if (request_irq(j2_ipi_irq, j2_ipi_interrupt_handler, IRQF_PERCPU, | 
|  | "ipi", (void *)j2_ipi_interrupt_handler) != 0) | 
|  | goto out; | 
|  |  | 
|  | max = max_cpus; | 
|  | out: | 
|  | /* Disable any cpus past max_cpus, or all secondaries if we didn't | 
|  | * get the necessary resources to support SMP. */ | 
|  | for (i=max; i<NR_CPUS; i++) { | 
|  | set_cpu_possible(i, false); | 
|  | set_cpu_present(i, false); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void j2_start_cpu(unsigned int cpu, unsigned long entry_point) | 
|  | { | 
|  | struct device_node *np; | 
|  | u32 regs[2]; | 
|  | void __iomem *release, *initpc; | 
|  |  | 
|  | if (!cpu) return; | 
|  |  | 
|  | np = of_get_cpu_node(cpu, NULL); | 
|  | if (!np) return; | 
|  |  | 
|  | if (of_property_read_u32_array(np, "cpu-release-addr", regs, 2)) return; | 
|  | release = ioremap(regs[0], sizeof(u32)); | 
|  | initpc = ioremap(regs[1], sizeof(u32)); | 
|  |  | 
|  | __raw_writel(entry_point, initpc); | 
|  | __raw_writel(1, release); | 
|  |  | 
|  | iounmap(initpc); | 
|  | iounmap(release); | 
|  |  | 
|  | pr_info("J2 SMP: requested start of cpu %u\n", cpu); | 
|  | } | 
|  |  | 
|  | static unsigned int j2_smp_processor_id(void) | 
|  | { | 
|  | return __raw_readl(sh2_cpuid_addr); | 
|  | } | 
|  |  | 
|  | static void j2_send_ipi(unsigned int cpu, unsigned int message) | 
|  | { | 
|  | volatile unsigned *pmsg; | 
|  | unsigned old; | 
|  | unsigned long val; | 
|  |  | 
|  | /* There is only one IPI interrupt shared by all messages, so | 
|  | * we keep a separate interrupt flag per message type in sw. */ | 
|  | pmsg = &per_cpu(j2_ipi_messages, cpu); | 
|  | do old = *pmsg; | 
|  | while (cmpxchg(pmsg, old, old|(1U<<message)) != old); | 
|  |  | 
|  | /* Generate the actual interrupt by writing to CCRn bit 28. */ | 
|  | val = __raw_readl(j2_ipi_trigger + cpu); | 
|  | __raw_writel(val | (1U<<28), j2_ipi_trigger + cpu); | 
|  | } | 
|  |  | 
|  | static struct plat_smp_ops j2_smp_ops = { | 
|  | .smp_setup		= j2_smp_setup, | 
|  | .prepare_cpus		= j2_prepare_cpus, | 
|  | .start_cpu		= j2_start_cpu, | 
|  | .smp_processor_id	= j2_smp_processor_id, | 
|  | .send_ipi		= j2_send_ipi, | 
|  | .cpu_die		= native_cpu_die, | 
|  | .cpu_disable		= native_cpu_disable, | 
|  | .play_dead		= native_play_dead, | 
|  | }; | 
|  |  | 
|  | CPU_METHOD_OF_DECLARE(j2_cpu_method, "jcore,spin-table", &j2_smp_ops); |