|  | /* SPDX-License-Identifier: GPL-2.0 */ | 
|  | /* | 
|  | * amlogic.h - hardware cryptographic offloader for Amlogic SoC | 
|  | * | 
|  | * Copyright (C) 2018-2019 Corentin LABBE <clabbe@baylibre.com> | 
|  | */ | 
|  | #include <crypto/aes.h> | 
|  | #include <crypto/engine.h> | 
|  | #include <crypto/skcipher.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/crypto.h> | 
|  | #include <linux/scatterlist.h> | 
|  |  | 
|  | #define MODE_KEY 1 | 
|  | #define MODE_AES_128 0x8 | 
|  | #define MODE_AES_192 0x9 | 
|  | #define MODE_AES_256 0xa | 
|  |  | 
|  | #define MESON_DECRYPT 0 | 
|  | #define MESON_ENCRYPT 1 | 
|  |  | 
|  | #define MESON_OPMODE_ECB 0 | 
|  | #define MESON_OPMODE_CBC 1 | 
|  |  | 
|  | #define MAXFLOW 2 | 
|  |  | 
|  | #define MAXDESC 64 | 
|  |  | 
|  | #define DESC_LAST BIT(18) | 
|  | #define DESC_ENCRYPTION BIT(28) | 
|  | #define DESC_OWN BIT(31) | 
|  |  | 
|  | /* | 
|  | * struct meson_desc - Descriptor for DMA operations | 
|  | * Note that without datasheet, some are unknown | 
|  | * @t_status:	Descriptor of the cipher operation (see description below) | 
|  | * @t_src:	Physical address of data to read | 
|  | * @t_dst:	Physical address of data to write | 
|  | * t_status is segmented like this: | 
|  | * @len:	0-16	length of data to operate | 
|  | * @irq:	17	Ignored by hardware | 
|  | * @eoc:	18	End means the descriptor is the last | 
|  | * @loop:	19	Unknown | 
|  | * @mode:	20-23	Type of algorithm (AES, SHA) | 
|  | * @begin:	24	Unknown | 
|  | * @end:	25	Unknown | 
|  | * @op_mode:	26-27	Blockmode (CBC, ECB) | 
|  | * @enc:	28	0 means decryption, 1 is for encryption | 
|  | * @block:	29	Unknown | 
|  | * @error:	30	Unknown | 
|  | * @owner:	31	owner of the descriptor, 1 own by HW | 
|  | */ | 
|  | struct meson_desc { | 
|  | __le32 t_status; | 
|  | __le32 t_src; | 
|  | __le32 t_dst; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * struct meson_flow - Information used by each flow | 
|  | * @engine:	ptr to the crypto_engine for this flow | 
|  | * @keylen:	keylen for this flow operation | 
|  | * @complete:	completion for the current task on this flow | 
|  | * @status:	set to 1 by interrupt if task is done | 
|  | * @t_phy:	Physical address of task | 
|  | * @tl:		pointer to the current ce_task for this flow | 
|  | * @stat_req:	number of request done by this flow | 
|  | */ | 
|  | struct meson_flow { | 
|  | struct crypto_engine *engine; | 
|  | struct completion complete; | 
|  | int status; | 
|  | unsigned int keylen; | 
|  | dma_addr_t t_phy; | 
|  | struct meson_desc *tl; | 
|  | #ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG | 
|  | unsigned long stat_req; | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * struct meson_dev - main container for all this driver information | 
|  | * @base:	base address of amlogic-crypto | 
|  | * @busclk:	bus clock for amlogic-crypto | 
|  | * @dev:	the platform device | 
|  | * @chanlist:	array of all flow | 
|  | * @flow:	flow to use in next request | 
|  | * @irqs:	IRQ numbers for amlogic-crypto | 
|  | * @dbgfs_dir:	Debugfs dentry for statistic directory | 
|  | * @dbgfs_stats: Debugfs dentry for statistic counters | 
|  | */ | 
|  | struct meson_dev { | 
|  | void __iomem *base; | 
|  | struct clk *busclk; | 
|  | struct device *dev; | 
|  | struct meson_flow *chanlist; | 
|  | atomic_t flow; | 
|  | int irqs[MAXFLOW]; | 
|  | #ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG | 
|  | struct dentry *dbgfs_dir; | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * struct meson_cipher_req_ctx - context for a skcipher request | 
|  | * @op_dir:	direction (encrypt vs decrypt) for this request | 
|  | * @flow:	the flow to use for this request | 
|  | */ | 
|  | struct meson_cipher_req_ctx { | 
|  | u32 op_dir; | 
|  | int flow; | 
|  | struct skcipher_request fallback_req;	// keep at the end | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * struct meson_cipher_tfm_ctx - context for a skcipher TFM | 
|  | * @enginectx:		crypto_engine used by this TFM | 
|  | * @key:		pointer to key data | 
|  | * @keylen:		len of the key | 
|  | * @keymode:		The keymode(type and size of key) associated with this TFM | 
|  | * @mc:			pointer to the private data of driver handling this TFM | 
|  | * @fallback_tfm:	pointer to the fallback TFM | 
|  | */ | 
|  | struct meson_cipher_tfm_ctx { | 
|  | struct crypto_engine_ctx enginectx; | 
|  | u32 *key; | 
|  | u32 keylen; | 
|  | u32 keymode; | 
|  | struct meson_dev *mc; | 
|  | struct crypto_skcipher *fallback_tfm; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * struct meson_alg_template - crypto_alg template | 
|  | * @type:		the CRYPTO_ALG_TYPE for this template | 
|  | * @blockmode:		the type of block operation | 
|  | * @mc:			pointer to the meson_dev structure associated with this template | 
|  | * @alg:		one of sub struct must be used | 
|  | * @stat_req:		number of request done on this template | 
|  | * @stat_fb:		total of all data len done on this template | 
|  | */ | 
|  | struct meson_alg_template { | 
|  | u32 type; | 
|  | u32 blockmode; | 
|  | union { | 
|  | struct skcipher_alg skcipher; | 
|  | } alg; | 
|  | struct meson_dev *mc; | 
|  | #ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG | 
|  | unsigned long stat_req; | 
|  | unsigned long stat_fb; | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | int meson_enqueue(struct crypto_async_request *areq, u32 type); | 
|  |  | 
|  | int meson_aes_setkey(struct crypto_skcipher *tfm, const u8 *key, | 
|  | unsigned int keylen); | 
|  | int meson_cipher_init(struct crypto_tfm *tfm); | 
|  | void meson_cipher_exit(struct crypto_tfm *tfm); | 
|  | int meson_skdecrypt(struct skcipher_request *areq); | 
|  | int meson_skencrypt(struct skcipher_request *areq); |