| /* | 
 |  * Sonics Silicon Backplane | 
 |  * Broadcom EXTIF core driver | 
 |  * | 
 |  * Copyright 2005, Broadcom Corporation | 
 |  * Copyright 2006, 2007, Michael Buesch <m@bues.ch> | 
 |  * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org> | 
 |  * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net> | 
 |  * | 
 |  * Licensed under the GNU/GPL. See COPYING for details. | 
 |  */ | 
 |  | 
 | #include "ssb_private.h" | 
 |  | 
 | #include <linux/serial.h> | 
 | #include <linux/serial_core.h> | 
 | #include <linux/serial_reg.h> | 
 |  | 
 |  | 
 | static inline u32 extif_read32(struct ssb_extif *extif, u16 offset) | 
 | { | 
 | 	return ssb_read32(extif->dev, offset); | 
 | } | 
 |  | 
 | static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value) | 
 | { | 
 | 	ssb_write32(extif->dev, offset, value); | 
 | } | 
 |  | 
 | static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset, | 
 | 				       u32 mask, u32 value) | 
 | { | 
 | 	value &= mask; | 
 | 	value |= extif_read32(extif, offset) & ~mask; | 
 | 	extif_write32(extif, offset, value); | 
 |  | 
 | 	return value; | 
 | } | 
 |  | 
 | #ifdef CONFIG_SSB_SERIAL | 
 | static bool serial_exists(u8 *regs) | 
 | { | 
 | 	u8 save_mcr, msr = 0; | 
 |  | 
 | 	if (regs) { | 
 | 		save_mcr = regs[UART_MCR]; | 
 | 		regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS); | 
 | 		msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI | 
 | 					| UART_MSR_CTS | UART_MSR_DSR); | 
 | 		regs[UART_MCR] = save_mcr; | 
 | 	} | 
 | 	return (msr == (UART_MSR_DCD | UART_MSR_CTS)); | 
 | } | 
 |  | 
 | int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports) | 
 | { | 
 | 	u32 i, nr_ports = 0; | 
 |  | 
 | 	/* Disable GPIO interrupt initially */ | 
 | 	extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0); | 
 | 	extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0); | 
 |  | 
 | 	for (i = 0; i < 2; i++) { | 
 | 		void __iomem *uart_regs; | 
 |  | 
 | 		uart_regs = ioremap(SSB_EUART, 16); | 
 | 		if (uart_regs) { | 
 | 			uart_regs += (i * 8); | 
 |  | 
 | 			if (serial_exists(uart_regs) && ports) { | 
 | 				extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2); | 
 |  | 
 | 				nr_ports++; | 
 | 				ports[i].regs = uart_regs; | 
 | 				ports[i].irq = 2; | 
 | 				ports[i].baud_base = 13500000; | 
 | 				ports[i].reg_shift = 0; | 
 | 			} | 
 | 			iounmap(uart_regs); | 
 | 		} | 
 | 	} | 
 | 	return nr_ports; | 
 | } | 
 | #endif /* CONFIG_SSB_SERIAL */ | 
 |  | 
 | void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns) | 
 | { | 
 | 	u32 tmp; | 
 |  | 
 | 	/* Initialize extif so we can get to the LEDs and external UART */ | 
 | 	extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN); | 
 |  | 
 | 	/* Set timing for the flash */ | 
 | 	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; | 
 | 	tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; | 
 | 	tmp |= DIV_ROUND_UP(120, ns); | 
 | 	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); | 
 |  | 
 | 	/* Set programmable interface timing for external uart */ | 
 | 	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; | 
 | 	tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; | 
 | 	tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; | 
 | 	tmp |= DIV_ROUND_UP(120, ns); | 
 | 	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); | 
 | } | 
 |  | 
 | void ssb_extif_get_clockcontrol(struct ssb_extif *extif, | 
 | 				u32 *pll_type, u32 *n, u32 *m) | 
 | { | 
 | 	*pll_type = SSB_PLLTYPE_1; | 
 | 	*n = extif_read32(extif, SSB_EXTIF_CLOCK_N); | 
 | 	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB); | 
 | } | 
 |  | 
 | u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) | 
 | { | 
 | 	struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); | 
 |  | 
 | 	return ssb_extif_watchdog_timer_set(extif, ticks); | 
 | } | 
 |  | 
 | u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) | 
 | { | 
 | 	struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); | 
 | 	u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms; | 
 |  | 
 | 	ticks = ssb_extif_watchdog_timer_set(extif, ticks); | 
 |  | 
 | 	return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK; | 
 | } | 
 |  | 
 | u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks) | 
 | { | 
 | 	if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER) | 
 | 		ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER; | 
 | 	extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks); | 
 |  | 
 | 	return ticks; | 
 | } | 
 |  | 
 | void ssb_extif_init(struct ssb_extif *extif) | 
 | { | 
 | 	if (!extif->dev) | 
 | 		return; /* We don't have a Extif core */ | 
 | 	spin_lock_init(&extif->gpio_lock); | 
 | } | 
 |  | 
 | u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) | 
 | { | 
 | 	return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask; | 
 | } | 
 |  | 
 | u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) | 
 | { | 
 | 	unsigned long flags; | 
 | 	u32 res = 0; | 
 |  | 
 | 	spin_lock_irqsave(&extif->gpio_lock, flags); | 
 | 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), | 
 | 				   mask, value); | 
 | 	spin_unlock_irqrestore(&extif->gpio_lock, flags); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) | 
 | { | 
 | 	unsigned long flags; | 
 | 	u32 res = 0; | 
 |  | 
 | 	spin_lock_irqsave(&extif->gpio_lock, flags); | 
 | 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), | 
 | 				   mask, value); | 
 | 	spin_unlock_irqrestore(&extif->gpio_lock, flags); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value) | 
 | { | 
 | 	unsigned long flags; | 
 | 	u32 res = 0; | 
 |  | 
 | 	spin_lock_irqsave(&extif->gpio_lock, flags); | 
 | 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value); | 
 | 	spin_unlock_irqrestore(&extif->gpio_lock, flags); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value) | 
 | { | 
 | 	unsigned long flags; | 
 | 	u32 res = 0; | 
 |  | 
 | 	spin_lock_irqsave(&extif->gpio_lock, flags); | 
 | 	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value); | 
 | 	spin_unlock_irqrestore(&extif->gpio_lock, flags); | 
 |  | 
 | 	return res; | 
 | } |