|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /*  KVM paravirtual clock driver. A clocksource implementation | 
|  | Copyright (C) 2008 Glauber de Oliveira Costa, Red Hat Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/clocksource.h> | 
|  | #include <linux/kvm_para.h> | 
|  | #include <asm/pvclock.h> | 
|  | #include <asm/msr.h> | 
|  | #include <asm/apic.h> | 
|  | #include <linux/percpu.h> | 
|  | #include <linux/hardirq.h> | 
|  | #include <linux/cpuhotplug.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/sched/clock.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/set_memory.h> | 
|  |  | 
|  | #include <asm/hypervisor.h> | 
|  | #include <asm/mem_encrypt.h> | 
|  | #include <asm/x86_init.h> | 
|  | #include <asm/kvmclock.h> | 
|  |  | 
|  | static int kvmclock __initdata = 1; | 
|  | static int kvmclock_vsyscall __initdata = 1; | 
|  | static int msr_kvm_system_time __ro_after_init; | 
|  | static int msr_kvm_wall_clock __ro_after_init; | 
|  | static u64 kvm_sched_clock_offset __ro_after_init; | 
|  |  | 
|  | static int __init parse_no_kvmclock(char *arg) | 
|  | { | 
|  | kvmclock = 0; | 
|  | return 0; | 
|  | } | 
|  | early_param("no-kvmclock", parse_no_kvmclock); | 
|  |  | 
|  | static int __init parse_no_kvmclock_vsyscall(char *arg) | 
|  | { | 
|  | kvmclock_vsyscall = 0; | 
|  | return 0; | 
|  | } | 
|  | early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall); | 
|  |  | 
|  | /* Aligned to page sizes to match whats mapped via vsyscalls to userspace */ | 
|  | #define HVC_BOOT_ARRAY_SIZE \ | 
|  | (PAGE_SIZE / sizeof(struct pvclock_vsyscall_time_info)) | 
|  |  | 
|  | static struct pvclock_vsyscall_time_info | 
|  | hv_clock_boot[HVC_BOOT_ARRAY_SIZE] __bss_decrypted __aligned(PAGE_SIZE); | 
|  | static struct pvclock_wall_clock wall_clock __bss_decrypted; | 
|  | static struct pvclock_vsyscall_time_info *hvclock_mem; | 
|  | DEFINE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu); | 
|  | EXPORT_PER_CPU_SYMBOL_GPL(hv_clock_per_cpu); | 
|  |  | 
|  | /* | 
|  | * The wallclock is the time of day when we booted. Since then, some time may | 
|  | * have elapsed since the hypervisor wrote the data. So we try to account for | 
|  | * that with system time | 
|  | */ | 
|  | static void kvm_get_wallclock(struct timespec64 *now) | 
|  | { | 
|  | wrmsrl(msr_kvm_wall_clock, slow_virt_to_phys(&wall_clock)); | 
|  | preempt_disable(); | 
|  | pvclock_read_wallclock(&wall_clock, this_cpu_pvti(), now); | 
|  | preempt_enable(); | 
|  | } | 
|  |  | 
|  | static int kvm_set_wallclock(const struct timespec64 *now) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static u64 kvm_clock_read(void) | 
|  | { | 
|  | u64 ret; | 
|  |  | 
|  | preempt_disable_notrace(); | 
|  | ret = pvclock_clocksource_read(this_cpu_pvti()); | 
|  | preempt_enable_notrace(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static u64 kvm_clock_get_cycles(struct clocksource *cs) | 
|  | { | 
|  | return kvm_clock_read(); | 
|  | } | 
|  |  | 
|  | static u64 kvm_sched_clock_read(void) | 
|  | { | 
|  | return kvm_clock_read() - kvm_sched_clock_offset; | 
|  | } | 
|  |  | 
|  | static inline void kvm_sched_clock_init(bool stable) | 
|  | { | 
|  | if (!stable) | 
|  | clear_sched_clock_stable(); | 
|  | kvm_sched_clock_offset = kvm_clock_read(); | 
|  | paravirt_set_sched_clock(kvm_sched_clock_read); | 
|  |  | 
|  | pr_info("kvm-clock: using sched offset of %llu cycles", | 
|  | kvm_sched_clock_offset); | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(kvm_sched_clock_offset) > | 
|  | sizeof(((struct pvclock_vcpu_time_info *)NULL)->system_time)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we don't do that, there is the possibility that the guest | 
|  | * will calibrate under heavy load - thus, getting a lower lpj - | 
|  | * and execute the delays themselves without load. This is wrong, | 
|  | * because no delay loop can finish beforehand. | 
|  | * Any heuristics is subject to fail, because ultimately, a large | 
|  | * poll of guests can be running and trouble each other. So we preset | 
|  | * lpj here | 
|  | */ | 
|  | static unsigned long kvm_get_tsc_khz(void) | 
|  | { | 
|  | setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); | 
|  | return pvclock_tsc_khz(this_cpu_pvti()); | 
|  | } | 
|  |  | 
|  | static void __init kvm_get_preset_lpj(void) | 
|  | { | 
|  | unsigned long khz; | 
|  | u64 lpj; | 
|  |  | 
|  | khz = kvm_get_tsc_khz(); | 
|  |  | 
|  | lpj = ((u64)khz * 1000); | 
|  | do_div(lpj, HZ); | 
|  | preset_lpj = lpj; | 
|  | } | 
|  |  | 
|  | bool kvm_check_and_clear_guest_paused(void) | 
|  | { | 
|  | struct pvclock_vsyscall_time_info *src = this_cpu_hvclock(); | 
|  | bool ret = false; | 
|  |  | 
|  | if (!src) | 
|  | return ret; | 
|  |  | 
|  | if ((src->pvti.flags & PVCLOCK_GUEST_STOPPED) != 0) { | 
|  | src->pvti.flags &= ~PVCLOCK_GUEST_STOPPED; | 
|  | pvclock_touch_watchdogs(); | 
|  | ret = true; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int kvm_cs_enable(struct clocksource *cs) | 
|  | { | 
|  | vclocks_set_used(VDSO_CLOCKMODE_PVCLOCK); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct clocksource kvm_clock = { | 
|  | .name	= "kvm-clock", | 
|  | .read	= kvm_clock_get_cycles, | 
|  | .rating	= 400, | 
|  | .mask	= CLOCKSOURCE_MASK(64), | 
|  | .flags	= CLOCK_SOURCE_IS_CONTINUOUS, | 
|  | .enable	= kvm_cs_enable, | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(kvm_clock); | 
|  |  | 
|  | static void kvm_register_clock(char *txt) | 
|  | { | 
|  | struct pvclock_vsyscall_time_info *src = this_cpu_hvclock(); | 
|  | u64 pa; | 
|  |  | 
|  | if (!src) | 
|  | return; | 
|  |  | 
|  | pa = slow_virt_to_phys(&src->pvti) | 0x01ULL; | 
|  | wrmsrl(msr_kvm_system_time, pa); | 
|  | pr_info("kvm-clock: cpu %d, msr %llx, %s", smp_processor_id(), pa, txt); | 
|  | } | 
|  |  | 
|  | static void kvm_save_sched_clock_state(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void kvm_restore_sched_clock_state(void) | 
|  | { | 
|  | kvm_register_clock("primary cpu clock, resume"); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_X86_LOCAL_APIC | 
|  | static void kvm_setup_secondary_clock(void) | 
|  | { | 
|  | kvm_register_clock("secondary cpu clock"); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | void kvmclock_disable(void) | 
|  | { | 
|  | if (msr_kvm_system_time) | 
|  | native_write_msr(msr_kvm_system_time, 0, 0); | 
|  | } | 
|  |  | 
|  | static void __init kvmclock_init_mem(void) | 
|  | { | 
|  | unsigned long ncpus; | 
|  | unsigned int order; | 
|  | struct page *p; | 
|  | int r; | 
|  |  | 
|  | if (HVC_BOOT_ARRAY_SIZE >= num_possible_cpus()) | 
|  | return; | 
|  |  | 
|  | ncpus = num_possible_cpus() - HVC_BOOT_ARRAY_SIZE; | 
|  | order = get_order(ncpus * sizeof(*hvclock_mem)); | 
|  |  | 
|  | p = alloc_pages(GFP_KERNEL, order); | 
|  | if (!p) { | 
|  | pr_warn("%s: failed to alloc %d pages", __func__, (1U << order)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | hvclock_mem = page_address(p); | 
|  |  | 
|  | /* | 
|  | * hvclock is shared between the guest and the hypervisor, must | 
|  | * be mapped decrypted. | 
|  | */ | 
|  | if (sev_active()) { | 
|  | r = set_memory_decrypted((unsigned long) hvclock_mem, | 
|  | 1UL << order); | 
|  | if (r) { | 
|  | __free_pages(p, order); | 
|  | hvclock_mem = NULL; | 
|  | pr_warn("kvmclock: set_memory_decrypted() failed. Disabling\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | memset(hvclock_mem, 0, PAGE_SIZE << order); | 
|  | } | 
|  |  | 
|  | static int __init kvm_setup_vsyscall_timeinfo(void) | 
|  | { | 
|  | kvmclock_init_mem(); | 
|  |  | 
|  | #ifdef CONFIG_X86_64 | 
|  | if (per_cpu(hv_clock_per_cpu, 0) && kvmclock_vsyscall) { | 
|  | u8 flags; | 
|  |  | 
|  | flags = pvclock_read_flags(&hv_clock_boot[0].pvti); | 
|  | if (!(flags & PVCLOCK_TSC_STABLE_BIT)) | 
|  | return 0; | 
|  |  | 
|  | kvm_clock.vdso_clock_mode = VDSO_CLOCKMODE_PVCLOCK; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | early_initcall(kvm_setup_vsyscall_timeinfo); | 
|  |  | 
|  | static int kvmclock_setup_percpu(unsigned int cpu) | 
|  | { | 
|  | struct pvclock_vsyscall_time_info *p = per_cpu(hv_clock_per_cpu, cpu); | 
|  |  | 
|  | /* | 
|  | * The per cpu area setup replicates CPU0 data to all cpu | 
|  | * pointers. So carefully check. CPU0 has been set up in init | 
|  | * already. | 
|  | */ | 
|  | if (!cpu || (p && p != per_cpu(hv_clock_per_cpu, 0))) | 
|  | return 0; | 
|  |  | 
|  | /* Use the static page for the first CPUs, allocate otherwise */ | 
|  | if (cpu < HVC_BOOT_ARRAY_SIZE) | 
|  | p = &hv_clock_boot[cpu]; | 
|  | else if (hvclock_mem) | 
|  | p = hvclock_mem + cpu - HVC_BOOT_ARRAY_SIZE; | 
|  | else | 
|  | return -ENOMEM; | 
|  |  | 
|  | per_cpu(hv_clock_per_cpu, cpu) = p; | 
|  | return p ? 0 : -ENOMEM; | 
|  | } | 
|  |  | 
|  | void __init kvmclock_init(void) | 
|  | { | 
|  | u8 flags; | 
|  |  | 
|  | if (!kvm_para_available() || !kvmclock) | 
|  | return; | 
|  |  | 
|  | if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE2)) { | 
|  | msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW; | 
|  | msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW; | 
|  | } else if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { | 
|  | msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; | 
|  | msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; | 
|  | } else { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (cpuhp_setup_state(CPUHP_BP_PREPARE_DYN, "kvmclock:setup_percpu", | 
|  | kvmclock_setup_percpu, NULL) < 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | pr_info("kvm-clock: Using msrs %x and %x", | 
|  | msr_kvm_system_time, msr_kvm_wall_clock); | 
|  |  | 
|  | this_cpu_write(hv_clock_per_cpu, &hv_clock_boot[0]); | 
|  | kvm_register_clock("primary cpu clock"); | 
|  | pvclock_set_pvti_cpu0_va(hv_clock_boot); | 
|  |  | 
|  | if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT)) | 
|  | pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); | 
|  |  | 
|  | flags = pvclock_read_flags(&hv_clock_boot[0].pvti); | 
|  | kvm_sched_clock_init(flags & PVCLOCK_TSC_STABLE_BIT); | 
|  |  | 
|  | x86_platform.calibrate_tsc = kvm_get_tsc_khz; | 
|  | x86_platform.calibrate_cpu = kvm_get_tsc_khz; | 
|  | x86_platform.get_wallclock = kvm_get_wallclock; | 
|  | x86_platform.set_wallclock = kvm_set_wallclock; | 
|  | #ifdef CONFIG_X86_LOCAL_APIC | 
|  | x86_cpuinit.early_percpu_clock_init = kvm_setup_secondary_clock; | 
|  | #endif | 
|  | x86_platform.save_sched_clock_state = kvm_save_sched_clock_state; | 
|  | x86_platform.restore_sched_clock_state = kvm_restore_sched_clock_state; | 
|  | kvm_get_preset_lpj(); | 
|  |  | 
|  | /* | 
|  | * X86_FEATURE_NONSTOP_TSC is TSC runs at constant rate | 
|  | * with P/T states and does not stop in deep C-states. | 
|  | * | 
|  | * Invariant TSC exposed by host means kvmclock is not necessary: | 
|  | * can use TSC as clocksource. | 
|  | * | 
|  | */ | 
|  | if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && | 
|  | boot_cpu_has(X86_FEATURE_NONSTOP_TSC) && | 
|  | !check_tsc_unstable()) | 
|  | kvm_clock.rating = 299; | 
|  |  | 
|  | clocksource_register_hz(&kvm_clock, NSEC_PER_SEC); | 
|  | pv_info.name = "KVM"; | 
|  | } |