|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * vsp1_lif.c  --  R-Car VSP1 LCD Controller Interface | 
|  | * | 
|  | * Copyright (C) 2013-2014 Renesas Electronics Corporation | 
|  | * | 
|  | * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/gfp.h> | 
|  |  | 
|  | #include <media/v4l2-subdev.h> | 
|  |  | 
|  | #include "vsp1.h" | 
|  | #include "vsp1_dl.h" | 
|  | #include "vsp1_lif.h" | 
|  |  | 
|  | #define LIF_MIN_SIZE				2U | 
|  | #define LIF_MAX_SIZE				8190U | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * Device Access | 
|  | */ | 
|  |  | 
|  | static inline void vsp1_lif_write(struct vsp1_lif *lif, | 
|  | struct vsp1_dl_body *dlb, u32 reg, u32 data) | 
|  | { | 
|  | vsp1_dl_body_write(dlb, reg + lif->entity.index * VI6_LIF_OFFSET, | 
|  | data); | 
|  | } | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * V4L2 Subdevice Operations | 
|  | */ | 
|  |  | 
|  | static const unsigned int lif_codes[] = { | 
|  | MEDIA_BUS_FMT_ARGB8888_1X32, | 
|  | MEDIA_BUS_FMT_AYUV8_1X32, | 
|  | }; | 
|  |  | 
|  | static int lif_enum_mbus_code(struct v4l2_subdev *subdev, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_mbus_code_enum *code) | 
|  | { | 
|  | return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, lif_codes, | 
|  | ARRAY_SIZE(lif_codes)); | 
|  | } | 
|  |  | 
|  | static int lif_enum_frame_size(struct v4l2_subdev *subdev, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_frame_size_enum *fse) | 
|  | { | 
|  | return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, | 
|  | LIF_MIN_SIZE, | 
|  | LIF_MIN_SIZE, LIF_MAX_SIZE, | 
|  | LIF_MAX_SIZE); | 
|  | } | 
|  |  | 
|  | static int lif_set_format(struct v4l2_subdev *subdev, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, lif_codes, | 
|  | ARRAY_SIZE(lif_codes), | 
|  | LIF_MIN_SIZE, LIF_MIN_SIZE, | 
|  | LIF_MAX_SIZE, LIF_MAX_SIZE); | 
|  | } | 
|  |  | 
|  | static const struct v4l2_subdev_pad_ops lif_pad_ops = { | 
|  | .init_cfg = vsp1_entity_init_cfg, | 
|  | .enum_mbus_code = lif_enum_mbus_code, | 
|  | .enum_frame_size = lif_enum_frame_size, | 
|  | .get_fmt = vsp1_subdev_get_pad_format, | 
|  | .set_fmt = lif_set_format, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_ops lif_ops = { | 
|  | .pad    = &lif_pad_ops, | 
|  | }; | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * VSP1 Entity Operations | 
|  | */ | 
|  |  | 
|  | static void lif_configure_stream(struct vsp1_entity *entity, | 
|  | struct vsp1_pipeline *pipe, | 
|  | struct vsp1_dl_list *dl, | 
|  | struct vsp1_dl_body *dlb) | 
|  | { | 
|  | const struct v4l2_mbus_framefmt *format; | 
|  | struct vsp1_lif *lif = to_lif(&entity->subdev); | 
|  | unsigned int hbth; | 
|  | unsigned int obth; | 
|  | unsigned int lbth; | 
|  |  | 
|  | format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config, | 
|  | LIF_PAD_SOURCE); | 
|  |  | 
|  | switch (entity->vsp1->version & VI6_IP_VERSION_MODEL_MASK) { | 
|  | case VI6_IP_VERSION_MODEL_VSPD_GEN2: | 
|  | case VI6_IP_VERSION_MODEL_VSPD_V2H: | 
|  | hbth = 1536; | 
|  | obth = min(128U, (format->width + 1) / 2 * format->height - 4); | 
|  | lbth = 1520; | 
|  | break; | 
|  |  | 
|  | case VI6_IP_VERSION_MODEL_VSPDL_GEN3: | 
|  | case VI6_IP_VERSION_MODEL_VSPD_V3: | 
|  | hbth = 0; | 
|  | obth = 1500; | 
|  | lbth = 0; | 
|  | break; | 
|  |  | 
|  | case VI6_IP_VERSION_MODEL_VSPD_GEN3: | 
|  | default: | 
|  | hbth = 0; | 
|  | obth = 3000; | 
|  | lbth = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | vsp1_lif_write(lif, dlb, VI6_LIF_CSBTH, | 
|  | (hbth << VI6_LIF_CSBTH_HBTH_SHIFT) | | 
|  | (lbth << VI6_LIF_CSBTH_LBTH_SHIFT)); | 
|  |  | 
|  | vsp1_lif_write(lif, dlb, VI6_LIF_CTRL, | 
|  | (obth << VI6_LIF_CTRL_OBTH_SHIFT) | | 
|  | (format->code == 0 ? VI6_LIF_CTRL_CFMT : 0) | | 
|  | VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN); | 
|  |  | 
|  | /* | 
|  | * On R-Car V3M the LIF0 buffer attribute register has to be set to a | 
|  | * non-default value to guarantee proper operation (otherwise artifacts | 
|  | * may appear on the output). The value required by the manual is not | 
|  | * explained but is likely a buffer size or threshold. | 
|  | */ | 
|  | if ((entity->vsp1->version & VI6_IP_VERSION_MASK) == | 
|  | (VI6_IP_VERSION_MODEL_VSPD_V3 | VI6_IP_VERSION_SOC_V3M)) | 
|  | vsp1_lif_write(lif, dlb, VI6_LIF_LBA, | 
|  | VI6_LIF_LBA_LBA0 | | 
|  | (1536 << VI6_LIF_LBA_LBA1_SHIFT)); | 
|  | } | 
|  |  | 
|  | static const struct vsp1_entity_operations lif_entity_ops = { | 
|  | .configure_stream = lif_configure_stream, | 
|  | }; | 
|  |  | 
|  | /* ----------------------------------------------------------------------------- | 
|  | * Initialization and Cleanup | 
|  | */ | 
|  |  | 
|  | struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1, unsigned int index) | 
|  | { | 
|  | struct vsp1_lif *lif; | 
|  | int ret; | 
|  |  | 
|  | lif = devm_kzalloc(vsp1->dev, sizeof(*lif), GFP_KERNEL); | 
|  | if (lif == NULL) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | lif->entity.ops = &lif_entity_ops; | 
|  | lif->entity.type = VSP1_ENTITY_LIF; | 
|  | lif->entity.index = index; | 
|  |  | 
|  | /* | 
|  | * The LIF is never exposed to userspace, but media entity registration | 
|  | * requires a function to be set. Use PROC_VIDEO_PIXEL_FORMATTER just to | 
|  | * avoid triggering a WARN_ON(), the value won't be seen anywhere. | 
|  | */ | 
|  | ret = vsp1_entity_init(vsp1, &lif->entity, "lif", 2, &lif_ops, | 
|  | MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); | 
|  | if (ret < 0) | 
|  | return ERR_PTR(ret); | 
|  |  | 
|  | return lif; | 
|  | } |