| .. SPDX-License-Identifier: GPL-2.0-or-later |
| |
| Kernel driver dps920ab |
| ======================== |
| |
| Supported chips: |
| |
| * Delta DPS920AB |
| |
| Prefix: 'dps920ab' |
| |
| Addresses scanned: - |
| |
| Authors: |
| Robert Marko <robert.marko@sartura.hr> |
| |
| |
| Description |
| ----------- |
| |
| This driver implements support for Delta DPS920AB 920W 54V DC single output |
| power supply with PMBus support. |
| |
| The driver is a client driver to the core PMBus driver. |
| Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. |
| |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not auto-detect devices. You will have to instantiate the |
| devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for |
| details. |
| |
| |
| Sysfs entries |
| ------------- |
| |
| ======================= ====================================================== |
| curr1_label "iin" |
| curr1_input Measured input current |
| curr1_alarm Input current high alarm |
| |
| curr2_label "iout1" |
| curr2_input Measured output current |
| curr2_max Maximum output current |
| curr2_rated_max Maximum rated output current |
| |
| in1_label "vin" |
| in1_input Measured input voltage |
| in1_alarm Input voltage alarm |
| |
| in2_label "vout1" |
| in2_input Measured output voltage |
| in2_rated_min Minimum rated output voltage |
| in2_rated_max Maximum rated output voltage |
| in2_alarm Output voltage alarm |
| |
| power1_label "pin" |
| power1_input Measured input power |
| power1_alarm Input power high alarm |
| |
| power2_label "pout1" |
| power2_input Measured output power |
| power2_rated_max Maximum rated output power |
| |
| temp[1-3]_input Measured temperature |
| temp[1-3]_alarm Temperature alarm |
| |
| fan1_alarm Fan 1 warning. |
| fan1_fault Fan 1 fault. |
| fan1_input Fan 1 speed in RPM. |
| ======================= ====================================================== |
