| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * ZynqMP DisplayPort Subsystem - KMS API | 
 |  * | 
 |  * Copyright (C) 2017 - 2021 Xilinx, Inc. | 
 |  * | 
 |  * Authors: | 
 |  * - Hyun Woo Kwon <hyun.kwon@xilinx.com> | 
 |  * - Laurent Pinchart <laurent.pinchart@ideasonboard.com> | 
 |  */ | 
 |  | 
 | #include <drm/drm_atomic.h> | 
 | #include <drm/drm_atomic_helper.h> | 
 | #include <drm/drm_blend.h> | 
 | #include <drm/drm_bridge.h> | 
 | #include <drm/drm_bridge_connector.h> | 
 | #include <drm/drm_connector.h> | 
 | #include <drm/drm_crtc.h> | 
 | #include <drm/drm_device.h> | 
 | #include <drm/drm_drv.h> | 
 | #include <drm/drm_encoder.h> | 
 | #include <drm/drm_fbdev_dma.h> | 
 | #include <drm/drm_fourcc.h> | 
 | #include <drm/drm_framebuffer.h> | 
 | #include <drm/drm_gem_dma_helper.h> | 
 | #include <drm/drm_gem_framebuffer_helper.h> | 
 | #include <drm/drm_managed.h> | 
 | #include <drm/drm_mode_config.h> | 
 | #include <drm/drm_plane.h> | 
 | #include <drm/drm_probe_helper.h> | 
 | #include <drm/drm_simple_kms_helper.h> | 
 | #include <drm/drm_vblank.h> | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/spinlock.h> | 
 |  | 
 | #include "zynqmp_disp.h" | 
 | #include "zynqmp_dp.h" | 
 | #include "zynqmp_dpsub.h" | 
 | #include "zynqmp_kms.h" | 
 |  | 
 | static inline struct zynqmp_dpsub *to_zynqmp_dpsub(struct drm_device *drm) | 
 | { | 
 | 	return container_of(drm, struct zynqmp_dpsub_drm, dev)->dpsub; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * DRM Planes | 
 |  */ | 
 |  | 
 | static int zynqmp_dpsub_plane_atomic_check(struct drm_plane *plane, | 
 | 					   struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, | 
 | 										 plane); | 
 | 	struct drm_crtc_state *crtc_state; | 
 |  | 
 | 	if (!new_plane_state->crtc) | 
 | 		return 0; | 
 |  | 
 | 	crtc_state = drm_atomic_get_crtc_state(state, new_plane_state->crtc); | 
 | 	if (IS_ERR(crtc_state)) | 
 | 		return PTR_ERR(crtc_state); | 
 |  | 
 | 	return drm_atomic_helper_check_plane_state(new_plane_state, | 
 | 						   crtc_state, | 
 | 						   DRM_PLANE_NO_SCALING, | 
 | 						   DRM_PLANE_NO_SCALING, | 
 | 						   false, false); | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_plane_atomic_disable(struct drm_plane *plane, | 
 | 					      struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, | 
 | 									   plane); | 
 | 	struct zynqmp_dpsub *dpsub = to_zynqmp_dpsub(plane->dev); | 
 | 	struct zynqmp_disp_layer *layer = dpsub->layers[plane->index]; | 
 |  | 
 | 	if (!old_state->fb) | 
 | 		return; | 
 |  | 
 | 	zynqmp_disp_layer_disable(layer); | 
 |  | 
 | 	if (plane->index == ZYNQMP_DPSUB_LAYER_GFX) | 
 | 		zynqmp_disp_blend_set_global_alpha(dpsub->disp, false, | 
 | 						   plane->state->alpha >> 8); | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane, | 
 | 					     struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane); | 
 | 	struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); | 
 | 	struct zynqmp_dpsub *dpsub = to_zynqmp_dpsub(plane->dev); | 
 | 	struct zynqmp_disp_layer *layer = dpsub->layers[plane->index]; | 
 | 	bool format_changed = false; | 
 |  | 
 | 	if (!old_state->fb || | 
 | 	    old_state->fb->format->format != new_state->fb->format->format) | 
 | 		format_changed = true; | 
 |  | 
 | 	/* | 
 | 	 * If the format has changed (including going from a previously | 
 | 	 * disabled state to any format), reconfigure the format. Disable the | 
 | 	 * plane first if needed. | 
 | 	 */ | 
 | 	if (format_changed) { | 
 | 		if (old_state->fb) | 
 | 			zynqmp_disp_layer_disable(layer); | 
 |  | 
 | 		zynqmp_disp_layer_set_format(layer, new_state->fb->format); | 
 | 	} | 
 |  | 
 | 	zynqmp_disp_layer_update(layer, new_state); | 
 |  | 
 | 	if (plane->index == ZYNQMP_DPSUB_LAYER_GFX) | 
 | 		zynqmp_disp_blend_set_global_alpha(dpsub->disp, true, | 
 | 						   plane->state->alpha >> 8); | 
 |  | 
 | 	/* | 
 | 	 * Unconditionally enable the layer, as it may have been disabled | 
 | 	 * previously either explicitly to reconfigure layer format, or | 
 | 	 * implicitly after DPSUB reset during display mode change. DRM | 
 | 	 * framework calls this callback for enabled planes only. | 
 | 	 */ | 
 | 	zynqmp_disp_layer_enable(layer); | 
 | } | 
 |  | 
 | static const struct drm_plane_helper_funcs zynqmp_dpsub_plane_helper_funcs = { | 
 | 	.atomic_check		= zynqmp_dpsub_plane_atomic_check, | 
 | 	.atomic_update		= zynqmp_dpsub_plane_atomic_update, | 
 | 	.atomic_disable		= zynqmp_dpsub_plane_atomic_disable, | 
 | }; | 
 |  | 
 | static const struct drm_plane_funcs zynqmp_dpsub_plane_funcs = { | 
 | 	.update_plane		= drm_atomic_helper_update_plane, | 
 | 	.disable_plane		= drm_atomic_helper_disable_plane, | 
 | 	.destroy		= drm_plane_cleanup, | 
 | 	.reset			= drm_atomic_helper_plane_reset, | 
 | 	.atomic_duplicate_state	= drm_atomic_helper_plane_duplicate_state, | 
 | 	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state, | 
 | }; | 
 |  | 
 | static int zynqmp_dpsub_create_planes(struct zynqmp_dpsub *dpsub) | 
 | { | 
 | 	unsigned int i; | 
 | 	int ret; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(dpsub->drm->planes); i++) { | 
 | 		struct zynqmp_disp_layer *layer = dpsub->layers[i]; | 
 | 		struct drm_plane *plane = &dpsub->drm->planes[i]; | 
 | 		enum drm_plane_type type; | 
 | 		unsigned int num_formats; | 
 | 		u32 *formats; | 
 |  | 
 | 		formats = zynqmp_disp_layer_drm_formats(layer, &num_formats); | 
 | 		if (!formats) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		/* Graphics layer is primary, and video layer is overlay. */ | 
 | 		type = i == ZYNQMP_DPSUB_LAYER_VID | 
 | 		     ? DRM_PLANE_TYPE_OVERLAY : DRM_PLANE_TYPE_PRIMARY; | 
 | 		ret = drm_universal_plane_init(&dpsub->drm->dev, plane, 0, | 
 | 					       &zynqmp_dpsub_plane_funcs, | 
 | 					       formats, num_formats, | 
 | 					       NULL, type, NULL); | 
 | 		kfree(formats); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		drm_plane_helper_add(plane, &zynqmp_dpsub_plane_helper_funcs); | 
 |  | 
 | 		drm_plane_create_zpos_immutable_property(plane, i); | 
 | 		if (i == ZYNQMP_DPSUB_LAYER_GFX) | 
 | 			drm_plane_create_alpha_property(plane); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * DRM CRTC | 
 |  */ | 
 |  | 
 | static inline struct zynqmp_dpsub *crtc_to_dpsub(struct drm_crtc *crtc) | 
 | { | 
 | 	return container_of(crtc, struct zynqmp_dpsub_drm, crtc)->dpsub; | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_crtc_atomic_enable(struct drm_crtc *crtc, | 
 | 					    struct drm_atomic_state *state) | 
 | { | 
 | 	struct zynqmp_dpsub *dpsub = crtc_to_dpsub(crtc); | 
 | 	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode; | 
 | 	int ret, vrefresh; | 
 |  | 
 | 	pm_runtime_get_sync(dpsub->dev); | 
 |  | 
 | 	zynqmp_disp_setup_clock(dpsub->disp, adjusted_mode->clock * 1000); | 
 |  | 
 | 	ret = clk_prepare_enable(dpsub->vid_clk); | 
 | 	if (ret) { | 
 | 		dev_err(dpsub->dev, "failed to enable a pixel clock\n"); | 
 | 		pm_runtime_put_sync(dpsub->dev); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	zynqmp_disp_enable(dpsub->disp); | 
 |  | 
 | 	/* Delay of 3 vblank intervals for timing gen to be stable */ | 
 | 	vrefresh = (adjusted_mode->clock * 1000) / | 
 | 		   (adjusted_mode->vtotal * adjusted_mode->htotal); | 
 | 	msleep(3 * 1000 / vrefresh); | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_crtc_atomic_disable(struct drm_crtc *crtc, | 
 | 					     struct drm_atomic_state *state) | 
 | { | 
 | 	struct zynqmp_dpsub *dpsub = crtc_to_dpsub(crtc); | 
 | 	struct drm_plane_state *old_plane_state; | 
 |  | 
 | 	/* | 
 | 	 * Disable the plane if active. The old plane state can be NULL in the | 
 | 	 * .shutdown() path if the plane is already disabled, skip | 
 | 	 * zynqmp_disp_plane_atomic_disable() in that case. | 
 | 	 */ | 
 | 	old_plane_state = drm_atomic_get_old_plane_state(state, crtc->primary); | 
 | 	if (old_plane_state) | 
 | 		zynqmp_dpsub_plane_atomic_disable(crtc->primary, state); | 
 |  | 
 | 	zynqmp_disp_disable(dpsub->disp); | 
 |  | 
 | 	drm_crtc_vblank_off(crtc); | 
 |  | 
 | 	spin_lock_irq(&crtc->dev->event_lock); | 
 | 	if (crtc->state->event) { | 
 | 		drm_crtc_send_vblank_event(crtc, crtc->state->event); | 
 | 		crtc->state->event = NULL; | 
 | 	} | 
 | 	spin_unlock_irq(&crtc->dev->event_lock); | 
 |  | 
 | 	clk_disable_unprepare(dpsub->vid_clk); | 
 | 	pm_runtime_put_sync(dpsub->dev); | 
 | } | 
 |  | 
 | static int zynqmp_dpsub_crtc_atomic_check(struct drm_crtc *crtc, | 
 | 					  struct drm_atomic_state *state) | 
 | { | 
 | 	return drm_atomic_add_affected_planes(state, crtc); | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_crtc_atomic_begin(struct drm_crtc *crtc, | 
 | 					   struct drm_atomic_state *state) | 
 | { | 
 | 	drm_crtc_vblank_on(crtc); | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_crtc_atomic_flush(struct drm_crtc *crtc, | 
 | 					   struct drm_atomic_state *state) | 
 | { | 
 | 	if (crtc->state->event) { | 
 | 		struct drm_pending_vblank_event *event; | 
 |  | 
 | 		/* Consume the flip_done event from atomic helper. */ | 
 | 		event = crtc->state->event; | 
 | 		crtc->state->event = NULL; | 
 |  | 
 | 		event->pipe = drm_crtc_index(crtc); | 
 |  | 
 | 		WARN_ON(drm_crtc_vblank_get(crtc) != 0); | 
 |  | 
 | 		spin_lock_irq(&crtc->dev->event_lock); | 
 | 		drm_crtc_arm_vblank_event(crtc, event); | 
 | 		spin_unlock_irq(&crtc->dev->event_lock); | 
 | 	} | 
 | } | 
 |  | 
 | static const struct drm_crtc_helper_funcs zynqmp_dpsub_crtc_helper_funcs = { | 
 | 	.atomic_enable	= zynqmp_dpsub_crtc_atomic_enable, | 
 | 	.atomic_disable	= zynqmp_dpsub_crtc_atomic_disable, | 
 | 	.atomic_check	= zynqmp_dpsub_crtc_atomic_check, | 
 | 	.atomic_begin	= zynqmp_dpsub_crtc_atomic_begin, | 
 | 	.atomic_flush	= zynqmp_dpsub_crtc_atomic_flush, | 
 | }; | 
 |  | 
 | static int zynqmp_dpsub_crtc_enable_vblank(struct drm_crtc *crtc) | 
 | { | 
 | 	struct zynqmp_dpsub *dpsub = crtc_to_dpsub(crtc); | 
 |  | 
 | 	zynqmp_dp_enable_vblank(dpsub->dp); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_crtc_disable_vblank(struct drm_crtc *crtc) | 
 | { | 
 | 	struct zynqmp_dpsub *dpsub = crtc_to_dpsub(crtc); | 
 |  | 
 | 	zynqmp_dp_disable_vblank(dpsub->dp); | 
 | } | 
 |  | 
 | static const struct drm_crtc_funcs zynqmp_dpsub_crtc_funcs = { | 
 | 	.destroy		= drm_crtc_cleanup, | 
 | 	.set_config		= drm_atomic_helper_set_config, | 
 | 	.page_flip		= drm_atomic_helper_page_flip, | 
 | 	.reset			= drm_atomic_helper_crtc_reset, | 
 | 	.atomic_duplicate_state	= drm_atomic_helper_crtc_duplicate_state, | 
 | 	.atomic_destroy_state	= drm_atomic_helper_crtc_destroy_state, | 
 | 	.enable_vblank		= zynqmp_dpsub_crtc_enable_vblank, | 
 | 	.disable_vblank		= zynqmp_dpsub_crtc_disable_vblank, | 
 | }; | 
 |  | 
 | static int zynqmp_dpsub_create_crtc(struct zynqmp_dpsub *dpsub) | 
 | { | 
 | 	struct drm_plane *plane = &dpsub->drm->planes[ZYNQMP_DPSUB_LAYER_GFX]; | 
 | 	struct drm_crtc *crtc = &dpsub->drm->crtc; | 
 | 	int ret; | 
 |  | 
 | 	ret = drm_crtc_init_with_planes(&dpsub->drm->dev, crtc, plane, | 
 | 					NULL, &zynqmp_dpsub_crtc_funcs, NULL); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	drm_crtc_helper_add(crtc, &zynqmp_dpsub_crtc_helper_funcs); | 
 |  | 
 | 	/* Start with vertical blanking interrupt reporting disabled. */ | 
 | 	drm_crtc_vblank_off(crtc); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_map_crtc_to_plane(struct zynqmp_dpsub *dpsub) | 
 | { | 
 | 	u32 possible_crtcs = drm_crtc_mask(&dpsub->drm->crtc); | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(dpsub->drm->planes); i++) | 
 | 		dpsub->drm->planes[i].possible_crtcs = possible_crtcs; | 
 | } | 
 |  | 
 | /** | 
 |  * zynqmp_dpsub_drm_handle_vblank - Handle the vblank event | 
 |  * @dpsub: DisplayPort subsystem | 
 |  * | 
 |  * This function handles the vblank interrupt, and sends an event to | 
 |  * CRTC object. This will be called by the DP vblank interrupt handler. | 
 |  */ | 
 | void zynqmp_dpsub_drm_handle_vblank(struct zynqmp_dpsub *dpsub) | 
 | { | 
 | 	drm_crtc_handle_vblank(&dpsub->drm->crtc); | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * Dumb Buffer & Framebuffer Allocation | 
 |  */ | 
 |  | 
 | static int zynqmp_dpsub_dumb_create(struct drm_file *file_priv, | 
 | 				    struct drm_device *drm, | 
 | 				    struct drm_mode_create_dumb *args) | 
 | { | 
 | 	struct zynqmp_dpsub *dpsub = to_zynqmp_dpsub(drm); | 
 | 	unsigned int pitch = DIV_ROUND_UP(args->width * args->bpp, 8); | 
 |  | 
 | 	/* Enforce the alignment constraints of the DMA engine. */ | 
 | 	args->pitch = ALIGN(pitch, dpsub->dma_align); | 
 |  | 
 | 	return drm_gem_dma_dumb_create_internal(file_priv, drm, args); | 
 | } | 
 |  | 
 | static struct drm_framebuffer * | 
 | zynqmp_dpsub_fb_create(struct drm_device *drm, struct drm_file *file_priv, | 
 | 		       const struct drm_mode_fb_cmd2 *mode_cmd) | 
 | { | 
 | 	struct zynqmp_dpsub *dpsub = to_zynqmp_dpsub(drm); | 
 | 	struct drm_mode_fb_cmd2 cmd = *mode_cmd; | 
 | 	unsigned int i; | 
 |  | 
 | 	/* Enforce the alignment constraints of the DMA engine. */ | 
 | 	for (i = 0; i < ARRAY_SIZE(cmd.pitches); ++i) | 
 | 		cmd.pitches[i] = ALIGN(cmd.pitches[i], dpsub->dma_align); | 
 |  | 
 | 	return drm_gem_fb_create(drm, file_priv, &cmd); | 
 | } | 
 |  | 
 | static const struct drm_mode_config_funcs zynqmp_dpsub_mode_config_funcs = { | 
 | 	.fb_create		= zynqmp_dpsub_fb_create, | 
 | 	.atomic_check		= drm_atomic_helper_check, | 
 | 	.atomic_commit		= drm_atomic_helper_commit, | 
 | }; | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * DRM/KMS Driver | 
 |  */ | 
 |  | 
 | DEFINE_DRM_GEM_DMA_FOPS(zynqmp_dpsub_drm_fops); | 
 |  | 
 | static const struct drm_driver zynqmp_dpsub_drm_driver = { | 
 | 	.driver_features		= DRIVER_MODESET | DRIVER_GEM | | 
 | 					  DRIVER_ATOMIC, | 
 |  | 
 | 	DRM_GEM_DMA_DRIVER_OPS_WITH_DUMB_CREATE(zynqmp_dpsub_dumb_create), | 
 |  | 
 | 	.fops				= &zynqmp_dpsub_drm_fops, | 
 |  | 
 | 	.name				= "zynqmp-dpsub", | 
 | 	.desc				= "Xilinx DisplayPort Subsystem Driver", | 
 | 	.date				= "20130509", | 
 | 	.major				= 1, | 
 | 	.minor				= 0, | 
 | }; | 
 |  | 
 | static int zynqmp_dpsub_kms_init(struct zynqmp_dpsub *dpsub) | 
 | { | 
 | 	struct drm_encoder *encoder = &dpsub->drm->encoder; | 
 | 	struct drm_connector *connector; | 
 | 	int ret; | 
 |  | 
 | 	/* Create the planes and the CRTC. */ | 
 | 	ret = zynqmp_dpsub_create_planes(dpsub); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = zynqmp_dpsub_create_crtc(dpsub); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	zynqmp_dpsub_map_crtc_to_plane(dpsub); | 
 |  | 
 | 	/* Create the encoder and attach the bridge. */ | 
 | 	encoder->possible_crtcs |= drm_crtc_mask(&dpsub->drm->crtc); | 
 | 	drm_simple_encoder_init(&dpsub->drm->dev, encoder, DRM_MODE_ENCODER_NONE); | 
 |  | 
 | 	ret = drm_bridge_attach(encoder, dpsub->bridge, NULL, | 
 | 				DRM_BRIDGE_ATTACH_NO_CONNECTOR); | 
 | 	if (ret) { | 
 | 		dev_err(dpsub->dev, "failed to attach bridge to encoder\n"); | 
 | 		goto err_encoder; | 
 | 	} | 
 |  | 
 | 	/* Create the connector for the chain of bridges. */ | 
 | 	connector = drm_bridge_connector_init(&dpsub->drm->dev, encoder); | 
 | 	if (IS_ERR(connector)) { | 
 | 		dev_err(dpsub->dev, "failed to created connector\n"); | 
 | 		ret = PTR_ERR(connector); | 
 | 		goto err_encoder; | 
 | 	} | 
 |  | 
 | 	ret = drm_connector_attach_encoder(connector, encoder); | 
 | 	if (ret < 0) { | 
 | 		dev_err(dpsub->dev, "failed to attach connector to encoder\n"); | 
 | 		goto err_encoder; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_encoder: | 
 | 	drm_encoder_cleanup(encoder); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void zynqmp_dpsub_drm_release(struct drm_device *drm, void *res) | 
 | { | 
 | 	struct zynqmp_dpsub_drm *dpdrm = res; | 
 |  | 
 | 	zynqmp_dpsub_release(dpdrm->dpsub); | 
 | } | 
 |  | 
 | int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub) | 
 | { | 
 | 	struct zynqmp_dpsub_drm *dpdrm; | 
 | 	struct drm_device *drm; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * Allocate the drm_device and immediately add a cleanup action to | 
 | 	 * release the zynqmp_dpsub instance. If any of those operations fail, | 
 | 	 * dpsub->drm will remain NULL, which tells the caller that it must | 
 | 	 * cleanup manually. | 
 | 	 */ | 
 | 	dpdrm = devm_drm_dev_alloc(dpsub->dev, &zynqmp_dpsub_drm_driver, | 
 | 				   struct zynqmp_dpsub_drm, dev); | 
 | 	if (IS_ERR(dpdrm)) | 
 | 		return PTR_ERR(dpdrm); | 
 |  | 
 | 	dpdrm->dpsub = dpsub; | 
 | 	drm = &dpdrm->dev; | 
 |  | 
 | 	ret = drmm_add_action(drm, zynqmp_dpsub_drm_release, dpdrm); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	dpsub->drm = dpdrm; | 
 |  | 
 | 	/* Initialize mode config, vblank and the KMS poll helper. */ | 
 | 	ret = drmm_mode_config_init(drm); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	drm->mode_config.funcs = &zynqmp_dpsub_mode_config_funcs; | 
 | 	drm->mode_config.min_width = 0; | 
 | 	drm->mode_config.min_height = 0; | 
 | 	drm->mode_config.max_width = ZYNQMP_DISP_MAX_WIDTH; | 
 | 	drm->mode_config.max_height = ZYNQMP_DISP_MAX_HEIGHT; | 
 |  | 
 | 	ret = drm_vblank_init(drm, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = zynqmp_dpsub_kms_init(dpsub); | 
 | 	if (ret < 0) | 
 | 		goto err_poll_fini; | 
 |  | 
 | 	drm_kms_helper_poll_init(drm); | 
 |  | 
 | 	/* Reset all components and register the DRM device. */ | 
 | 	drm_mode_config_reset(drm); | 
 |  | 
 | 	ret = drm_dev_register(drm, 0); | 
 | 	if (ret < 0) | 
 | 		goto err_poll_fini; | 
 |  | 
 | 	/* Initialize fbdev generic emulation. */ | 
 | 	drm_fbdev_dma_setup(drm, 24); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_poll_fini: | 
 | 	drm_kms_helper_poll_fini(drm); | 
 | 	return ret; | 
 | } | 
 |  | 
 | void zynqmp_dpsub_drm_cleanup(struct zynqmp_dpsub *dpsub) | 
 | { | 
 | 	struct drm_device *drm = &dpsub->drm->dev; | 
 |  | 
 | 	drm_dev_unplug(drm); | 
 | 	drm_atomic_helper_shutdown(drm); | 
 | 	drm_encoder_cleanup(&dpsub->drm->encoder); | 
 | 	drm_kms_helper_poll_fini(drm); | 
 | } |