| #ifndef __ASMARM_ELF_H | 
 | #define __ASMARM_ELF_H | 
 |  | 
 | #include <linux/config.h> | 
 |  | 
 | /* | 
 |  * ELF register definitions.. | 
 |  */ | 
 |  | 
 | #include <asm/ptrace.h> | 
 | #include <asm/user.h> | 
 | #include <asm/procinfo.h> | 
 |  | 
 | typedef unsigned long elf_greg_t; | 
 | typedef unsigned long elf_freg_t[3]; | 
 |  | 
 | #define EM_ARM	40 | 
 | #define EF_ARM_APCS26 0x08 | 
 | #define EF_ARM_SOFT_FLOAT 0x200 | 
 | #define EF_ARM_EABI_MASK 0xFF000000 | 
 |  | 
 | #define R_ARM_NONE	0 | 
 | #define R_ARM_PC24	1 | 
 | #define R_ARM_ABS32	2 | 
 | #define R_ARM_CALL	28 | 
 | #define R_ARM_JUMP24	29 | 
 |  | 
 | #define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) | 
 | typedef elf_greg_t elf_gregset_t[ELF_NGREG]; | 
 |  | 
 | typedef struct user_fp elf_fpregset_t; | 
 |  | 
 | /* | 
 |  * This is used to ensure we don't load something for the wrong architecture. | 
 |  */ | 
 | #define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && (ELF_PROC_OK((x))) ) | 
 |  | 
 | /* | 
 |  * These are used to set parameters in the core dumps. | 
 |  */ | 
 | #define ELF_CLASS	ELFCLASS32 | 
 | #ifdef __ARMEB__ | 
 | #define ELF_DATA	ELFDATA2MSB | 
 | #else | 
 | #define ELF_DATA	ELFDATA2LSB | 
 | #endif | 
 | #define ELF_ARCH	EM_ARM | 
 |  | 
 | #define USE_ELF_CORE_DUMP | 
 | #define ELF_EXEC_PAGESIZE	4096 | 
 |  | 
 | /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical | 
 |    use of this is to invoke "./ld.so someprog" to test out a new version of | 
 |    the loader.  We need to make sure that it is out of the way of the program | 
 |    that it will "exec", and that there is sufficient room for the brk.  */ | 
 |  | 
 | #define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3) | 
 |  | 
 | /* When the program starts, a1 contains a pointer to a function to be  | 
 |    registered with atexit, as per the SVR4 ABI.  A value of 0 means we  | 
 |    have no such handler.  */ | 
 | #define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0 | 
 |  | 
 | /* This yields a mask that user programs can use to figure out what | 
 |    instruction set this cpu supports. */ | 
 |  | 
 | #define ELF_HWCAP	(elf_hwcap) | 
 |  | 
 | /* This yields a string that ld.so will use to load implementation | 
 |    specific libraries for optimization.  This is more specific in | 
 |    intent than poking at uname or /proc/cpuinfo. */ | 
 |  | 
 | /* For now we just provide a fairly general string that describes the | 
 |    processor family.  This could be made more specific later if someone | 
 |    implemented optimisations that require it.  26-bit CPUs give you | 
 |    "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't | 
 |    supported).  32-bit CPUs give you "v3[lb]" for anything based on an | 
 |    ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1 | 
 |    core.  */ | 
 |  | 
 | #define ELF_PLATFORM_SIZE 8 | 
 | extern char elf_platform[]; | 
 | #define ELF_PLATFORM	(elf_platform) | 
 |  | 
 | #ifdef __KERNEL__ | 
 |  | 
 | /* | 
 |  * 32-bit code is always OK.  Some cpus can do 26-bit, some can't. | 
 |  */ | 
 | #define ELF_PROC_OK(x)	(ELF_THUMB_OK(x) && ELF_26BIT_OK(x)) | 
 |  | 
 | #define ELF_THUMB_OK(x) \ | 
 | 	(( (elf_hwcap & HWCAP_THUMB) && ((x)->e_entry & 1) == 1) || \ | 
 | 	 ((x)->e_entry & 3) == 0) | 
 |  | 
 | #define ELF_26BIT_OK(x) \ | 
 | 	(( (elf_hwcap & HWCAP_26BIT) && (x)->e_flags & EF_ARM_APCS26) || \ | 
 | 	  ((x)->e_flags & EF_ARM_APCS26) == 0) | 
 |  | 
 | #ifndef CONFIG_IWMMXT | 
 |  | 
 | /* Old NetWinder binaries were compiled in such a way that the iBCS | 
 |    heuristic always trips on them.  Until these binaries become uncommon | 
 |    enough not to care, don't trust the `ibcs' flag here.  In any case | 
 |    there is no other ELF system currently supported by iBCS. | 
 |    @@ Could print a warning message to encourage users to upgrade.  */ | 
 | #define SET_PERSONALITY(ex,ibcs2) \ | 
 | 	set_personality(((ex).e_flags&EF_ARM_APCS26 ?PER_LINUX :PER_LINUX_32BIT)) | 
 |  | 
 | #else | 
 |  | 
 | /* | 
 |  * All iWMMXt capable CPUs don't support 26-bit mode.  Yet they can run | 
 |  * legacy binaries which used to contain FPA11 floating point instructions | 
 |  * that have always been emulated by the kernel.  PFA11 and iWMMXt overlap | 
 |  * on coprocessor 1 space though.  We therefore must decide if given task | 
 |  * is allowed to use CP 0 and 1 for iWMMXt, or if they should be blocked | 
 |  * at all times for the prefetch exception handler to catch FPA11 opcodes | 
 |  * and emulate them.  The best indication to discriminate those two cases | 
 |  * is the SOFT_FLOAT flag in the ELF header. | 
 |  */ | 
 |  | 
 | #define SET_PERSONALITY(ex,ibcs2) \ | 
 | do { \ | 
 | 	set_personality(PER_LINUX_32BIT); \ | 
 | 	if (((ex).e_flags & EF_ARM_EABI_MASK) || \ | 
 | 	    ((ex).e_flags & EF_ARM_SOFT_FLOAT)) \ | 
 | 		set_thread_flag(TIF_USING_IWMMXT); \ | 
 | 	else \ | 
 | 		clear_thread_flag(TIF_USING_IWMMXT); \ | 
 | } while (0) | 
 |  | 
 | #endif | 
 |  | 
 | #endif | 
 |  | 
 | #endif |