|  | /* | 
|  | * Hardware monitoring driver for LM25056 / LM25063 / LM25066 / LM5064 / LM5066 | 
|  | * | 
|  | * Copyright (c) 2011 Ericsson AB. | 
|  | * Copyright (c) 2013 Guenter Roeck | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/i2c.h> | 
|  | #include "pmbus.h" | 
|  |  | 
|  | enum chips { lm25056, lm25063, lm25066, lm5064, lm5066 }; | 
|  |  | 
|  | #define LM25066_READ_VAUX		0xd0 | 
|  | #define LM25066_MFR_READ_IIN		0xd1 | 
|  | #define LM25066_MFR_READ_PIN		0xd2 | 
|  | #define LM25066_MFR_IIN_OC_WARN_LIMIT	0xd3 | 
|  | #define LM25066_MFR_PIN_OP_WARN_LIMIT	0xd4 | 
|  | #define LM25066_READ_PIN_PEAK		0xd5 | 
|  | #define LM25066_CLEAR_PIN_PEAK		0xd6 | 
|  | #define LM25066_DEVICE_SETUP		0xd9 | 
|  | #define LM25066_READ_AVG_VIN		0xdc | 
|  | #define LM25066_READ_AVG_VOUT		0xdd | 
|  | #define LM25066_READ_AVG_IIN		0xde | 
|  | #define LM25066_READ_AVG_PIN		0xdf | 
|  |  | 
|  | #define LM25066_DEV_SETUP_CL		(1 << 4)	/* Current limit */ | 
|  |  | 
|  | /* LM25056 only */ | 
|  |  | 
|  | #define LM25056_VAUX_OV_WARN_LIMIT	0xe3 | 
|  | #define LM25056_VAUX_UV_WARN_LIMIT	0xe4 | 
|  |  | 
|  | #define LM25056_MFR_STS_VAUX_OV_WARN	(1 << 1) | 
|  | #define LM25056_MFR_STS_VAUX_UV_WARN	(1 << 0) | 
|  |  | 
|  | /* LM25063 only */ | 
|  |  | 
|  | #define LM25063_READ_VOUT_MAX		0xe5 | 
|  | #define LM25063_READ_VOUT_MIN		0xe6 | 
|  |  | 
|  | struct __coeff { | 
|  | short m, b, R; | 
|  | }; | 
|  |  | 
|  | #define PSC_CURRENT_IN_L	(PSC_NUM_CLASSES) | 
|  | #define PSC_POWER_L		(PSC_NUM_CLASSES + 1) | 
|  |  | 
|  | static struct __coeff lm25066_coeff[5][PSC_NUM_CLASSES + 2] = { | 
|  | [lm25056] = { | 
|  | [PSC_VOLTAGE_IN] = { | 
|  | .m = 16296, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN] = { | 
|  | .m = 13797, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN_L] = { | 
|  | .m = 6726, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_POWER] = { | 
|  | .m = 5501, | 
|  | .R = -3, | 
|  | }, | 
|  | [PSC_POWER_L] = { | 
|  | .m = 26882, | 
|  | .R = -4, | 
|  | }, | 
|  | [PSC_TEMPERATURE] = { | 
|  | .m = 1580, | 
|  | .b = -14500, | 
|  | .R = -2, | 
|  | }, | 
|  | }, | 
|  | [lm25066] = { | 
|  | [PSC_VOLTAGE_IN] = { | 
|  | .m = 22070, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_VOLTAGE_OUT] = { | 
|  | .m = 22070, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN] = { | 
|  | .m = 13661, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN_L] = { | 
|  | .m = 6852, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_POWER] = { | 
|  | .m = 736, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_POWER_L] = { | 
|  | .m = 369, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_TEMPERATURE] = { | 
|  | .m = 16, | 
|  | }, | 
|  | }, | 
|  | [lm25063] = { | 
|  | [PSC_VOLTAGE_IN] = { | 
|  | .m = 16000, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_VOLTAGE_OUT] = { | 
|  | .m = 16000, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN] = { | 
|  | .m = 10000, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN_L] = { | 
|  | .m = 10000, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_POWER] = { | 
|  | .m = 5000, | 
|  | .R = -3, | 
|  | }, | 
|  | [PSC_POWER_L] = { | 
|  | .m = 5000, | 
|  | .R = -3, | 
|  | }, | 
|  | [PSC_TEMPERATURE] = { | 
|  | .m = 15596, | 
|  | .R = -3, | 
|  | }, | 
|  | }, | 
|  | [lm5064] = { | 
|  | [PSC_VOLTAGE_IN] = { | 
|  | .m = 4611, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_VOLTAGE_OUT] = { | 
|  | .m = 4621, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN] = { | 
|  | .m = 10742, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN_L] = { | 
|  | .m = 5456, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_POWER] = { | 
|  | .m = 1204, | 
|  | .R = -3, | 
|  | }, | 
|  | [PSC_POWER_L] = { | 
|  | .m = 612, | 
|  | .R = -3, | 
|  | }, | 
|  | [PSC_TEMPERATURE] = { | 
|  | .m = 16, | 
|  | }, | 
|  | }, | 
|  | [lm5066] = { | 
|  | [PSC_VOLTAGE_IN] = { | 
|  | .m = 4587, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_VOLTAGE_OUT] = { | 
|  | .m = 4587, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN] = { | 
|  | .m = 10753, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_CURRENT_IN_L] = { | 
|  | .m = 5405, | 
|  | .R = -2, | 
|  | }, | 
|  | [PSC_POWER] = { | 
|  | .m = 1204, | 
|  | .R = -3, | 
|  | }, | 
|  | [PSC_POWER_L] = { | 
|  | .m = 605, | 
|  | .R = -3, | 
|  | }, | 
|  | [PSC_TEMPERATURE] = { | 
|  | .m = 16, | 
|  | }, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | struct lm25066_data { | 
|  | int id; | 
|  | u16 rlimit;			/* Maximum register value */ | 
|  | struct pmbus_driver_info info; | 
|  | }; | 
|  |  | 
|  | #define to_lm25066_data(x)  container_of(x, struct lm25066_data, info) | 
|  |  | 
|  | static int lm25066_read_word_data(struct i2c_client *client, int page, int reg) | 
|  | { | 
|  | const struct pmbus_driver_info *info = pmbus_get_driver_info(client); | 
|  | const struct lm25066_data *data = to_lm25066_data(info); | 
|  | int ret; | 
|  |  | 
|  | switch (reg) { | 
|  | case PMBUS_VIRT_READ_VMON: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_READ_VAUX); | 
|  | if (ret < 0) | 
|  | break; | 
|  | /* Adjust returned value to match VIN coefficients */ | 
|  | switch (data->id) { | 
|  | case lm25056: | 
|  | /* VIN: 6.14 mV VAUX: 293 uV LSB */ | 
|  | ret = DIV_ROUND_CLOSEST(ret * 293, 6140); | 
|  | break; | 
|  | case lm25063: | 
|  | /* VIN: 6.25 mV VAUX: 200.0 uV LSB */ | 
|  | ret = DIV_ROUND_CLOSEST(ret * 20, 625); | 
|  | break; | 
|  | case lm25066: | 
|  | /* VIN: 4.54 mV VAUX: 283.2 uV LSB */ | 
|  | ret = DIV_ROUND_CLOSEST(ret * 2832, 45400); | 
|  | break; | 
|  | case lm5064: | 
|  | /* VIN: 4.53 mV VAUX: 700 uV LSB */ | 
|  | ret = DIV_ROUND_CLOSEST(ret * 70, 453); | 
|  | break; | 
|  | case lm5066: | 
|  | /* VIN: 2.18 mV VAUX: 725 uV LSB */ | 
|  | ret = DIV_ROUND_CLOSEST(ret * 725, 2180); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case PMBUS_READ_IIN: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_IIN); | 
|  | break; | 
|  | case PMBUS_READ_PIN: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_PIN); | 
|  | break; | 
|  | case PMBUS_IIN_OC_WARN_LIMIT: | 
|  | ret = pmbus_read_word_data(client, 0, | 
|  | LM25066_MFR_IIN_OC_WARN_LIMIT); | 
|  | break; | 
|  | case PMBUS_PIN_OP_WARN_LIMIT: | 
|  | ret = pmbus_read_word_data(client, 0, | 
|  | LM25066_MFR_PIN_OP_WARN_LIMIT); | 
|  | break; | 
|  | case PMBUS_VIRT_READ_VIN_AVG: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VIN); | 
|  | break; | 
|  | case PMBUS_VIRT_READ_VOUT_AVG: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VOUT); | 
|  | break; | 
|  | case PMBUS_VIRT_READ_IIN_AVG: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_IIN); | 
|  | break; | 
|  | case PMBUS_VIRT_READ_PIN_AVG: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_PIN); | 
|  | break; | 
|  | case PMBUS_VIRT_READ_PIN_MAX: | 
|  | ret = pmbus_read_word_data(client, 0, LM25066_READ_PIN_PEAK); | 
|  | break; | 
|  | case PMBUS_VIRT_RESET_PIN_HISTORY: | 
|  | ret = 0; | 
|  | break; | 
|  | default: | 
|  | ret = -ENODATA; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lm25063_read_word_data(struct i2c_client *client, int page, int reg) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | switch (reg) { | 
|  | case PMBUS_VIRT_READ_VOUT_MAX: | 
|  | ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MAX); | 
|  | break; | 
|  | case PMBUS_VIRT_READ_VOUT_MIN: | 
|  | ret = pmbus_read_word_data(client, 0, LM25063_READ_VOUT_MIN); | 
|  | break; | 
|  | default: | 
|  | ret = lm25066_read_word_data(client, page, reg); | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lm25056_read_word_data(struct i2c_client *client, int page, int reg) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | switch (reg) { | 
|  | case PMBUS_VIRT_VMON_UV_WARN_LIMIT: | 
|  | ret = pmbus_read_word_data(client, 0, | 
|  | LM25056_VAUX_UV_WARN_LIMIT); | 
|  | if (ret < 0) | 
|  | break; | 
|  | /* Adjust returned value to match VIN coefficients */ | 
|  | ret = DIV_ROUND_CLOSEST(ret * 293, 6140); | 
|  | break; | 
|  | case PMBUS_VIRT_VMON_OV_WARN_LIMIT: | 
|  | ret = pmbus_read_word_data(client, 0, | 
|  | LM25056_VAUX_OV_WARN_LIMIT); | 
|  | if (ret < 0) | 
|  | break; | 
|  | /* Adjust returned value to match VIN coefficients */ | 
|  | ret = DIV_ROUND_CLOSEST(ret * 293, 6140); | 
|  | break; | 
|  | default: | 
|  | ret = lm25066_read_word_data(client, page, reg); | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg) | 
|  | { | 
|  | int ret, s; | 
|  |  | 
|  | switch (reg) { | 
|  | case PMBUS_VIRT_STATUS_VMON: | 
|  | ret = pmbus_read_byte_data(client, 0, | 
|  | PMBUS_STATUS_MFR_SPECIFIC); | 
|  | if (ret < 0) | 
|  | break; | 
|  | s = 0; | 
|  | if (ret & LM25056_MFR_STS_VAUX_UV_WARN) | 
|  | s |= PB_VOLTAGE_UV_WARNING; | 
|  | if (ret & LM25056_MFR_STS_VAUX_OV_WARN) | 
|  | s |= PB_VOLTAGE_OV_WARNING; | 
|  | ret = s; | 
|  | break; | 
|  | default: | 
|  | ret = -ENODATA; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, | 
|  | u16 word) | 
|  | { | 
|  | const struct pmbus_driver_info *info = pmbus_get_driver_info(client); | 
|  | const struct lm25066_data *data = to_lm25066_data(info); | 
|  | int ret; | 
|  |  | 
|  | switch (reg) { | 
|  | case PMBUS_POUT_OP_FAULT_LIMIT: | 
|  | case PMBUS_POUT_OP_WARN_LIMIT: | 
|  | case PMBUS_VOUT_UV_WARN_LIMIT: | 
|  | case PMBUS_OT_FAULT_LIMIT: | 
|  | case PMBUS_OT_WARN_LIMIT: | 
|  | case PMBUS_IIN_OC_FAULT_LIMIT: | 
|  | case PMBUS_VIN_UV_WARN_LIMIT: | 
|  | case PMBUS_VIN_UV_FAULT_LIMIT: | 
|  | case PMBUS_VIN_OV_FAULT_LIMIT: | 
|  | case PMBUS_VIN_OV_WARN_LIMIT: | 
|  | word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); | 
|  | ret = pmbus_write_word_data(client, 0, reg, word); | 
|  | pmbus_clear_cache(client); | 
|  | break; | 
|  | case PMBUS_IIN_OC_WARN_LIMIT: | 
|  | word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); | 
|  | ret = pmbus_write_word_data(client, 0, | 
|  | LM25066_MFR_IIN_OC_WARN_LIMIT, | 
|  | word); | 
|  | pmbus_clear_cache(client); | 
|  | break; | 
|  | case PMBUS_PIN_OP_WARN_LIMIT: | 
|  | word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); | 
|  | ret = pmbus_write_word_data(client, 0, | 
|  | LM25066_MFR_PIN_OP_WARN_LIMIT, | 
|  | word); | 
|  | pmbus_clear_cache(client); | 
|  | break; | 
|  | case PMBUS_VIRT_VMON_UV_WARN_LIMIT: | 
|  | /* Adjust from VIN coefficients (for LM25056) */ | 
|  | word = DIV_ROUND_CLOSEST((int)word * 6140, 293); | 
|  | word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); | 
|  | ret = pmbus_write_word_data(client, 0, | 
|  | LM25056_VAUX_UV_WARN_LIMIT, word); | 
|  | pmbus_clear_cache(client); | 
|  | break; | 
|  | case PMBUS_VIRT_VMON_OV_WARN_LIMIT: | 
|  | /* Adjust from VIN coefficients (for LM25056) */ | 
|  | word = DIV_ROUND_CLOSEST((int)word * 6140, 293); | 
|  | word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); | 
|  | ret = pmbus_write_word_data(client, 0, | 
|  | LM25056_VAUX_OV_WARN_LIMIT, word); | 
|  | pmbus_clear_cache(client); | 
|  | break; | 
|  | case PMBUS_VIRT_RESET_PIN_HISTORY: | 
|  | ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK); | 
|  | break; | 
|  | default: | 
|  | ret = -ENODATA; | 
|  | break; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lm25066_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | int config; | 
|  | struct lm25066_data *data; | 
|  | struct pmbus_driver_info *info; | 
|  | struct __coeff *coeff; | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, | 
|  | I2C_FUNC_SMBUS_READ_BYTE_DATA)) | 
|  | return -ENODEV; | 
|  |  | 
|  | data = devm_kzalloc(&client->dev, sizeof(struct lm25066_data), | 
|  | GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP); | 
|  | if (config < 0) | 
|  | return config; | 
|  |  | 
|  | data->id = id->driver_data; | 
|  | info = &data->info; | 
|  |  | 
|  | info->pages = 1; | 
|  | info->format[PSC_VOLTAGE_IN] = direct; | 
|  | info->format[PSC_VOLTAGE_OUT] = direct; | 
|  | info->format[PSC_CURRENT_IN] = direct; | 
|  | info->format[PSC_TEMPERATURE] = direct; | 
|  | info->format[PSC_POWER] = direct; | 
|  |  | 
|  | info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON | 
|  | | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT | 
|  | | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; | 
|  |  | 
|  | if (data->id == lm25056) { | 
|  | info->func[0] |= PMBUS_HAVE_STATUS_VMON; | 
|  | info->read_word_data = lm25056_read_word_data; | 
|  | info->read_byte_data = lm25056_read_byte_data; | 
|  | data->rlimit = 0x0fff; | 
|  | } else if (data->id == lm25063) { | 
|  | info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | 
|  | | PMBUS_HAVE_POUT; | 
|  | info->read_word_data = lm25063_read_word_data; | 
|  | data->rlimit = 0xffff; | 
|  | } else { | 
|  | info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; | 
|  | info->read_word_data = lm25066_read_word_data; | 
|  | data->rlimit = 0x0fff; | 
|  | } | 
|  | info->write_word_data = lm25066_write_word_data; | 
|  |  | 
|  | coeff = &lm25066_coeff[data->id][0]; | 
|  | info->m[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].m; | 
|  | info->b[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].b; | 
|  | info->R[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].R; | 
|  | info->m[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].m; | 
|  | info->b[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].b; | 
|  | info->R[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].R; | 
|  | info->m[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].m; | 
|  | info->b[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].b; | 
|  | info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R; | 
|  | info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b; | 
|  | info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R; | 
|  | info->b[PSC_POWER] = coeff[PSC_POWER].b; | 
|  | info->R[PSC_POWER] = coeff[PSC_POWER].R; | 
|  | if (config & LM25066_DEV_SETUP_CL) { | 
|  | info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m; | 
|  | info->m[PSC_POWER] = coeff[PSC_POWER_L].m; | 
|  | } else { | 
|  | info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m; | 
|  | info->m[PSC_POWER] = coeff[PSC_POWER].m; | 
|  | } | 
|  |  | 
|  | return pmbus_do_probe(client, id, info); | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id lm25066_id[] = { | 
|  | {"lm25056", lm25056}, | 
|  | {"lm25063", lm25063}, | 
|  | {"lm25066", lm25066}, | 
|  | {"lm5064", lm5064}, | 
|  | {"lm5066", lm5066}, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(i2c, lm25066_id); | 
|  |  | 
|  | /* This is the driver that will be inserted */ | 
|  | static struct i2c_driver lm25066_driver = { | 
|  | .driver = { | 
|  | .name = "lm25066", | 
|  | }, | 
|  | .probe = lm25066_probe, | 
|  | .remove = pmbus_do_remove, | 
|  | .id_table = lm25066_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(lm25066_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Guenter Roeck"); | 
|  | MODULE_DESCRIPTION("PMBus driver for LM25066 and compatible chips"); | 
|  | MODULE_LICENSE("GPL"); |