|  | /* | 
|  | * dvb_frontend.c: DVB frontend tuning interface/thread | 
|  | * | 
|  | * | 
|  | * Copyright (C) 1999-2001 Ralph  Metzler | 
|  | *			   Marcus Metzler | 
|  | *			   Holger Waechtler | 
|  | *				      for convergence integrated media GmbH | 
|  | * | 
|  | * Copyright (C) 2004 Andrew de Quincey (tuning thread cleanup) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version 2 | 
|  | * of the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | 
|  | * Or, point your browser to http://www.gnu.org/copyleft/gpl.html | 
|  | */ | 
|  |  | 
|  | /* Enables DVBv3 compatibility bits at the headers */ | 
|  | #define __DVB_CORE__ | 
|  |  | 
|  | #include <linux/string.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/poll.h> | 
|  | #include <linux/semaphore.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/freezer.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <asm/processor.h> | 
|  |  | 
|  | #include "dvb_frontend.h" | 
|  | #include "dvbdev.h" | 
|  | #include <linux/dvb/version.h> | 
|  |  | 
|  | static int dvb_frontend_debug; | 
|  | static int dvb_shutdown_timeout; | 
|  | static int dvb_force_auto_inversion; | 
|  | static int dvb_override_tune_delay; | 
|  | static int dvb_powerdown_on_sleep = 1; | 
|  | static int dvb_mfe_wait_time = 5; | 
|  |  | 
|  | module_param_named(frontend_debug, dvb_frontend_debug, int, 0644); | 
|  | MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off)."); | 
|  | module_param(dvb_shutdown_timeout, int, 0644); | 
|  | MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware"); | 
|  | module_param(dvb_force_auto_inversion, int, 0644); | 
|  | MODULE_PARM_DESC(dvb_force_auto_inversion, "0: normal (default), 1: INVERSION_AUTO forced always"); | 
|  | module_param(dvb_override_tune_delay, int, 0644); | 
|  | MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt"); | 
|  | module_param(dvb_powerdown_on_sleep, int, 0644); | 
|  | MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)"); | 
|  | module_param(dvb_mfe_wait_time, int, 0644); | 
|  | MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to <mfe_wait_time> seconds on open() for multi-frontend to become available (default:5 seconds)"); | 
|  |  | 
|  | #define FESTATE_IDLE 1 | 
|  | #define FESTATE_RETUNE 2 | 
|  | #define FESTATE_TUNING_FAST 4 | 
|  | #define FESTATE_TUNING_SLOW 8 | 
|  | #define FESTATE_TUNED 16 | 
|  | #define FESTATE_ZIGZAG_FAST 32 | 
|  | #define FESTATE_ZIGZAG_SLOW 64 | 
|  | #define FESTATE_DISEQC 128 | 
|  | #define FESTATE_ERROR 256 | 
|  | #define FESTATE_WAITFORLOCK (FESTATE_TUNING_FAST | FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW | FESTATE_DISEQC) | 
|  | #define FESTATE_SEARCHING_FAST (FESTATE_TUNING_FAST | FESTATE_ZIGZAG_FAST) | 
|  | #define FESTATE_SEARCHING_SLOW (FESTATE_TUNING_SLOW | FESTATE_ZIGZAG_SLOW) | 
|  | #define FESTATE_LOSTLOCK (FESTATE_ZIGZAG_FAST | FESTATE_ZIGZAG_SLOW) | 
|  |  | 
|  | #define FE_ALGO_HW		1 | 
|  | /* | 
|  | * FESTATE_IDLE. No tuning parameters have been supplied and the loop is idling. | 
|  | * FESTATE_RETUNE. Parameters have been supplied, but we have not yet performed the first tune. | 
|  | * FESTATE_TUNING_FAST. Tuning parameters have been supplied and fast zigzag scan is in progress. | 
|  | * FESTATE_TUNING_SLOW. Tuning parameters have been supplied. Fast zigzag failed, so we're trying again, but slower. | 
|  | * FESTATE_TUNED. The frontend has successfully locked on. | 
|  | * FESTATE_ZIGZAG_FAST. The lock has been lost, and a fast zigzag has been initiated to try and regain it. | 
|  | * FESTATE_ZIGZAG_SLOW. The lock has been lost. Fast zigzag has been failed, so we're trying again, but slower. | 
|  | * FESTATE_DISEQC. A DISEQC command has just been issued. | 
|  | * FESTATE_WAITFORLOCK. When we're waiting for a lock. | 
|  | * FESTATE_SEARCHING_FAST. When we're searching for a signal using a fast zigzag scan. | 
|  | * FESTATE_SEARCHING_SLOW. When we're searching for a signal using a slow zigzag scan. | 
|  | * FESTATE_LOSTLOCK. When the lock has been lost, and we're searching it again. | 
|  | */ | 
|  |  | 
|  | static DEFINE_MUTEX(frontend_mutex); | 
|  |  | 
|  | struct dvb_frontend_private { | 
|  |  | 
|  | /* thread/frontend values */ | 
|  | struct dvb_device *dvbdev; | 
|  | struct dvb_frontend_parameters parameters_out; | 
|  | struct dvb_fe_events events; | 
|  | struct semaphore sem; | 
|  | struct list_head list_head; | 
|  | wait_queue_head_t wait_queue; | 
|  | struct task_struct *thread; | 
|  | unsigned long release_jiffies; | 
|  | unsigned int wakeup; | 
|  | fe_status_t status; | 
|  | unsigned long tune_mode_flags; | 
|  | unsigned int delay; | 
|  | unsigned int reinitialise; | 
|  | int tone; | 
|  | int voltage; | 
|  |  | 
|  | /* swzigzag values */ | 
|  | unsigned int state; | 
|  | unsigned int bending; | 
|  | int lnb_drift; | 
|  | unsigned int inversion; | 
|  | unsigned int auto_step; | 
|  | unsigned int auto_sub_step; | 
|  | unsigned int started_auto_step; | 
|  | unsigned int min_delay; | 
|  | unsigned int max_drift; | 
|  | unsigned int step_size; | 
|  | int quality; | 
|  | unsigned int check_wrapped; | 
|  | enum dvbfe_search algo_status; | 
|  | }; | 
|  |  | 
|  | static void dvb_frontend_wakeup(struct dvb_frontend *fe); | 
|  | static int dtv_get_frontend(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_parameters *p_out); | 
|  | static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_parameters *p); | 
|  |  | 
|  | static bool has_get_frontend(struct dvb_frontend *fe) | 
|  | { | 
|  | return fe->ops.get_frontend != NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Due to DVBv3 API calls, a delivery system should be mapped into one of | 
|  | * the 4 DVBv3 delivery systems (FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC), | 
|  | * otherwise, a DVBv3 call will fail. | 
|  | */ | 
|  | enum dvbv3_emulation_type { | 
|  | DVBV3_UNKNOWN, | 
|  | DVBV3_QPSK, | 
|  | DVBV3_QAM, | 
|  | DVBV3_OFDM, | 
|  | DVBV3_ATSC, | 
|  | }; | 
|  |  | 
|  | static enum dvbv3_emulation_type dvbv3_type(u32 delivery_system) | 
|  | { | 
|  | switch (delivery_system) { | 
|  | case SYS_DVBC_ANNEX_A: | 
|  | case SYS_DVBC_ANNEX_C: | 
|  | return DVBV3_QAM; | 
|  | case SYS_DVBS: | 
|  | case SYS_DVBS2: | 
|  | case SYS_TURBO: | 
|  | case SYS_ISDBS: | 
|  | case SYS_DSS: | 
|  | return DVBV3_QPSK; | 
|  | case SYS_DVBT: | 
|  | case SYS_DVBT2: | 
|  | case SYS_ISDBT: | 
|  | case SYS_DTMB: | 
|  | return DVBV3_OFDM; | 
|  | case SYS_ATSC: | 
|  | case SYS_ATSCMH: | 
|  | case SYS_DVBC_ANNEX_B: | 
|  | return DVBV3_ATSC; | 
|  | case SYS_UNDEFINED: | 
|  | case SYS_ISDBC: | 
|  | case SYS_DVBH: | 
|  | case SYS_DAB: | 
|  | default: | 
|  | /* | 
|  | * Doesn't know how to emulate those types and/or | 
|  | * there's no frontend driver from this type yet | 
|  | * with some emulation code, so, we're not sure yet how | 
|  | * to handle them, or they're not compatible with a DVBv3 call. | 
|  | */ | 
|  | return DVBV3_UNKNOWN; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dvb_fe_events *events = &fepriv->events; | 
|  | struct dvb_frontend_event *e; | 
|  | int wp; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if ((status & FE_HAS_LOCK) && has_get_frontend(fe)) | 
|  | dtv_get_frontend(fe, &fepriv->parameters_out); | 
|  |  | 
|  | mutex_lock(&events->mtx); | 
|  |  | 
|  | wp = (events->eventw + 1) % MAX_EVENT; | 
|  | if (wp == events->eventr) { | 
|  | events->overflow = 1; | 
|  | events->eventr = (events->eventr + 1) % MAX_EVENT; | 
|  | } | 
|  |  | 
|  | e = &events->events[events->eventw]; | 
|  | e->status = status; | 
|  | e->parameters = fepriv->parameters_out; | 
|  |  | 
|  | events->eventw = wp; | 
|  |  | 
|  | mutex_unlock(&events->mtx); | 
|  |  | 
|  | wake_up_interruptible (&events->wait_queue); | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_get_event(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_event *event, int flags) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dvb_fe_events *events = &fepriv->events; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if (events->overflow) { | 
|  | events->overflow = 0; | 
|  | return -EOVERFLOW; | 
|  | } | 
|  |  | 
|  | if (events->eventw == events->eventr) { | 
|  | int ret; | 
|  |  | 
|  | if (flags & O_NONBLOCK) | 
|  | return -EWOULDBLOCK; | 
|  |  | 
|  | up(&fepriv->sem); | 
|  |  | 
|  | ret = wait_event_interruptible (events->wait_queue, | 
|  | events->eventw != events->eventr); | 
|  |  | 
|  | if (down_interruptible (&fepriv->sem)) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | mutex_lock(&events->mtx); | 
|  | *event = events->events[events->eventr]; | 
|  | events->eventr = (events->eventr + 1) % MAX_EVENT; | 
|  | mutex_unlock(&events->mtx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dvb_frontend_clear_events(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dvb_fe_events *events = &fepriv->events; | 
|  |  | 
|  | mutex_lock(&events->mtx); | 
|  | events->eventr = events->eventw; | 
|  | mutex_unlock(&events->mtx); | 
|  | } | 
|  |  | 
|  | static void dvb_frontend_init(struct dvb_frontend *fe) | 
|  | { | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: initialising adapter %i frontend %i (%s)...\n", | 
|  | __func__, fe->dvb->num, fe->id, fe->ops.info.name); | 
|  |  | 
|  | if (fe->ops.init) | 
|  | fe->ops.init(fe); | 
|  | if (fe->ops.tuner_ops.init) { | 
|  | if (fe->ops.i2c_gate_ctrl) | 
|  | fe->ops.i2c_gate_ctrl(fe, 1); | 
|  | fe->ops.tuner_ops.init(fe); | 
|  | if (fe->ops.i2c_gate_ctrl) | 
|  | fe->ops.i2c_gate_ctrl(fe, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | void dvb_frontend_reinitialise(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  |  | 
|  | fepriv->reinitialise = 1; | 
|  | dvb_frontend_wakeup(fe); | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_frontend_reinitialise); | 
|  |  | 
|  | static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepriv, int locked) | 
|  | { | 
|  | int q2; | 
|  | struct dvb_frontend *fe = fepriv->dvbdev->priv; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if (locked) | 
|  | (fepriv->quality) = (fepriv->quality * 220 + 36*256) / 256; | 
|  | else | 
|  | (fepriv->quality) = (fepriv->quality * 220 + 0) / 256; | 
|  |  | 
|  | q2 = fepriv->quality - 128; | 
|  | q2 *= q2; | 
|  |  | 
|  | fepriv->delay = fepriv->min_delay + q2 * HZ / (128*128); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Performs automatic twiddling of frontend parameters. | 
|  | * | 
|  | * @param fe The frontend concerned. | 
|  | * @param check_wrapped Checks if an iteration has completed. DO NOT SET ON THE FIRST ATTEMPT | 
|  | * @returns Number of complete iterations that have been performed. | 
|  | */ | 
|  | static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wrapped) | 
|  | { | 
|  | int autoinversion; | 
|  | int ready = 0; | 
|  | int fe_set_err = 0; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp; | 
|  | int original_inversion = c->inversion; | 
|  | u32 original_frequency = c->frequency; | 
|  |  | 
|  | /* are we using autoinversion? */ | 
|  | autoinversion = ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && | 
|  | (c->inversion == INVERSION_AUTO)); | 
|  |  | 
|  | /* setup parameters correctly */ | 
|  | while(!ready) { | 
|  | /* calculate the lnb_drift */ | 
|  | fepriv->lnb_drift = fepriv->auto_step * fepriv->step_size; | 
|  |  | 
|  | /* wrap the auto_step if we've exceeded the maximum drift */ | 
|  | if (fepriv->lnb_drift > fepriv->max_drift) { | 
|  | fepriv->auto_step = 0; | 
|  | fepriv->auto_sub_step = 0; | 
|  | fepriv->lnb_drift = 0; | 
|  | } | 
|  |  | 
|  | /* perform inversion and +/- zigzag */ | 
|  | switch(fepriv->auto_sub_step) { | 
|  | case 0: | 
|  | /* try with the current inversion and current drift setting */ | 
|  | ready = 1; | 
|  | break; | 
|  |  | 
|  | case 1: | 
|  | if (!autoinversion) break; | 
|  |  | 
|  | fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; | 
|  | ready = 1; | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | if (fepriv->lnb_drift == 0) break; | 
|  |  | 
|  | fepriv->lnb_drift = -fepriv->lnb_drift; | 
|  | ready = 1; | 
|  | break; | 
|  |  | 
|  | case 3: | 
|  | if (fepriv->lnb_drift == 0) break; | 
|  | if (!autoinversion) break; | 
|  |  | 
|  | fepriv->inversion = (fepriv->inversion == INVERSION_OFF) ? INVERSION_ON : INVERSION_OFF; | 
|  | fepriv->lnb_drift = -fepriv->lnb_drift; | 
|  | ready = 1; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | fepriv->auto_step++; | 
|  | fepriv->auto_sub_step = -1; /* it'll be incremented to 0 in a moment */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!ready) fepriv->auto_sub_step++; | 
|  | } | 
|  |  | 
|  | /* if this attempt would hit where we started, indicate a complete | 
|  | * iteration has occurred */ | 
|  | if ((fepriv->auto_step == fepriv->started_auto_step) && | 
|  | (fepriv->auto_sub_step == 0) && check_wrapped) { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s: drift:%i inversion:%i auto_step:%i " \ | 
|  | "auto_sub_step:%i started_auto_step:%i\n", | 
|  | __func__, fepriv->lnb_drift, fepriv->inversion, | 
|  | fepriv->auto_step, fepriv->auto_sub_step, | 
|  | fepriv->started_auto_step); | 
|  |  | 
|  | /* set the frontend itself */ | 
|  | c->frequency += fepriv->lnb_drift; | 
|  | if (autoinversion) | 
|  | c->inversion = fepriv->inversion; | 
|  | tmp = *c; | 
|  | if (fe->ops.set_frontend) | 
|  | fe_set_err = fe->ops.set_frontend(fe); | 
|  | *c = tmp; | 
|  | if (fe_set_err < 0) { | 
|  | fepriv->state = FESTATE_ERROR; | 
|  | return fe_set_err; | 
|  | } | 
|  |  | 
|  | c->frequency = original_frequency; | 
|  | c->inversion = original_inversion; | 
|  |  | 
|  | fepriv->auto_sub_step++; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dvb_frontend_swzigzag(struct dvb_frontend *fe) | 
|  | { | 
|  | fe_status_t s = 0; | 
|  | int retval = 0; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache, tmp; | 
|  |  | 
|  | /* if we've got no parameters, just keep idling */ | 
|  | if (fepriv->state & FESTATE_IDLE) { | 
|  | fepriv->delay = 3*HZ; | 
|  | fepriv->quality = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* in SCAN mode, we just set the frontend when asked and leave it alone */ | 
|  | if (fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT) { | 
|  | if (fepriv->state & FESTATE_RETUNE) { | 
|  | tmp = *c; | 
|  | if (fe->ops.set_frontend) | 
|  | retval = fe->ops.set_frontend(fe); | 
|  | *c = tmp; | 
|  | if (retval < 0) | 
|  | fepriv->state = FESTATE_ERROR; | 
|  | else | 
|  | fepriv->state = FESTATE_TUNED; | 
|  | } | 
|  | fepriv->delay = 3*HZ; | 
|  | fepriv->quality = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* get the frontend status */ | 
|  | if (fepriv->state & FESTATE_RETUNE) { | 
|  | s = 0; | 
|  | } else { | 
|  | if (fe->ops.read_status) | 
|  | fe->ops.read_status(fe, &s); | 
|  | if (s != fepriv->status) { | 
|  | dvb_frontend_add_event(fe, s); | 
|  | fepriv->status = s; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* if we're not tuned, and we have a lock, move to the TUNED state */ | 
|  | if ((fepriv->state & FESTATE_WAITFORLOCK) && (s & FE_HAS_LOCK)) { | 
|  | dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | 
|  | fepriv->state = FESTATE_TUNED; | 
|  |  | 
|  | /* if we're tuned, then we have determined the correct inversion */ | 
|  | if ((!(fe->ops.info.caps & FE_CAN_INVERSION_AUTO)) && | 
|  | (c->inversion == INVERSION_AUTO)) { | 
|  | c->inversion = fepriv->inversion; | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* if we are tuned already, check we're still locked */ | 
|  | if (fepriv->state & FESTATE_TUNED) { | 
|  | dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | 
|  |  | 
|  | /* we're tuned, and the lock is still good... */ | 
|  | if (s & FE_HAS_LOCK) { | 
|  | return; | 
|  | } else { /* if we _WERE_ tuned, but now don't have a lock */ | 
|  | fepriv->state = FESTATE_ZIGZAG_FAST; | 
|  | fepriv->started_auto_step = fepriv->auto_step; | 
|  | fepriv->check_wrapped = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* don't actually do anything if we're in the LOSTLOCK state, | 
|  | * the frontend is set to FE_CAN_RECOVER, and the max_drift is 0 */ | 
|  | if ((fepriv->state & FESTATE_LOSTLOCK) && | 
|  | (fe->ops.info.caps & FE_CAN_RECOVER) && (fepriv->max_drift == 0)) { | 
|  | dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* don't do anything if we're in the DISEQC state, since this | 
|  | * might be someone with a motorized dish controlled by DISEQC. | 
|  | * If its actually a re-tune, there will be a SET_FRONTEND soon enough.	*/ | 
|  | if (fepriv->state & FESTATE_DISEQC) { | 
|  | dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* if we're in the RETUNE state, set everything up for a brand | 
|  | * new scan, keeping the current inversion setting, as the next | 
|  | * tune is _very_ likely to require the same */ | 
|  | if (fepriv->state & FESTATE_RETUNE) { | 
|  | fepriv->lnb_drift = 0; | 
|  | fepriv->auto_step = 0; | 
|  | fepriv->auto_sub_step = 0; | 
|  | fepriv->started_auto_step = 0; | 
|  | fepriv->check_wrapped = 0; | 
|  | } | 
|  |  | 
|  | /* fast zigzag. */ | 
|  | if ((fepriv->state & FESTATE_SEARCHING_FAST) || (fepriv->state & FESTATE_RETUNE)) { | 
|  | fepriv->delay = fepriv->min_delay; | 
|  |  | 
|  | /* perform a tune */ | 
|  | retval = dvb_frontend_swzigzag_autotune(fe, | 
|  | fepriv->check_wrapped); | 
|  | if (retval < 0) { | 
|  | return; | 
|  | } else if (retval) { | 
|  | /* OK, if we've run out of trials at the fast speed. | 
|  | * Drop back to slow for the _next_ attempt */ | 
|  | fepriv->state = FESTATE_SEARCHING_SLOW; | 
|  | fepriv->started_auto_step = fepriv->auto_step; | 
|  | return; | 
|  | } | 
|  | fepriv->check_wrapped = 1; | 
|  |  | 
|  | /* if we've just retuned, enter the ZIGZAG_FAST state. | 
|  | * This ensures we cannot return from an | 
|  | * FE_SET_FRONTEND ioctl before the first frontend tune | 
|  | * occurs */ | 
|  | if (fepriv->state & FESTATE_RETUNE) { | 
|  | fepriv->state = FESTATE_TUNING_FAST; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* slow zigzag */ | 
|  | if (fepriv->state & FESTATE_SEARCHING_SLOW) { | 
|  | dvb_frontend_swzigzag_update_delay(fepriv, s & FE_HAS_LOCK); | 
|  |  | 
|  | /* Note: don't bother checking for wrapping; we stay in this | 
|  | * state until we get a lock */ | 
|  | dvb_frontend_swzigzag_autotune(fe, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_is_exiting(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  |  | 
|  | if (fe->exit != DVB_FE_NO_EXIT) | 
|  | return 1; | 
|  |  | 
|  | if (fepriv->dvbdev->writers == 1) | 
|  | if (time_after_eq(jiffies, fepriv->release_jiffies + | 
|  | dvb_shutdown_timeout * HZ)) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_should_wakeup(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  |  | 
|  | if (fepriv->wakeup) { | 
|  | fepriv->wakeup = 0; | 
|  | return 1; | 
|  | } | 
|  | return dvb_frontend_is_exiting(fe); | 
|  | } | 
|  |  | 
|  | static void dvb_frontend_wakeup(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  |  | 
|  | fepriv->wakeup = 1; | 
|  | wake_up_interruptible(&fepriv->wait_queue); | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_thread(void *data) | 
|  | { | 
|  | struct dvb_frontend *fe = data; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | fe_status_t s; | 
|  | enum dvbfe_algo algo; | 
|  |  | 
|  | bool re_tune = false; | 
|  | bool semheld = false; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | fepriv->check_wrapped = 0; | 
|  | fepriv->quality = 0; | 
|  | fepriv->delay = 3*HZ; | 
|  | fepriv->status = 0; | 
|  | fepriv->wakeup = 0; | 
|  | fepriv->reinitialise = 0; | 
|  |  | 
|  | dvb_frontend_init(fe); | 
|  |  | 
|  | set_freezable(); | 
|  | while (1) { | 
|  | up(&fepriv->sem);	    /* is locked when we enter the thread... */ | 
|  | restart: | 
|  | wait_event_interruptible_timeout(fepriv->wait_queue, | 
|  | dvb_frontend_should_wakeup(fe) || kthread_should_stop() | 
|  | || freezing(current), | 
|  | fepriv->delay); | 
|  |  | 
|  | if (kthread_should_stop() || dvb_frontend_is_exiting(fe)) { | 
|  | /* got signal or quitting */ | 
|  | if (!down_interruptible(&fepriv->sem)) | 
|  | semheld = true; | 
|  | fe->exit = DVB_FE_NORMAL_EXIT; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (try_to_freeze()) | 
|  | goto restart; | 
|  |  | 
|  | if (down_interruptible(&fepriv->sem)) | 
|  | break; | 
|  |  | 
|  | if (fepriv->reinitialise) { | 
|  | dvb_frontend_init(fe); | 
|  | if (fe->ops.set_tone && fepriv->tone != -1) | 
|  | fe->ops.set_tone(fe, fepriv->tone); | 
|  | if (fe->ops.set_voltage && fepriv->voltage != -1) | 
|  | fe->ops.set_voltage(fe, fepriv->voltage); | 
|  | fepriv->reinitialise = 0; | 
|  | } | 
|  |  | 
|  | /* do an iteration of the tuning loop */ | 
|  | if (fe->ops.get_frontend_algo) { | 
|  | algo = fe->ops.get_frontend_algo(fe); | 
|  | switch (algo) { | 
|  | case DVBFE_ALGO_HW: | 
|  | dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_HW\n", __func__); | 
|  |  | 
|  | if (fepriv->state & FESTATE_RETUNE) { | 
|  | dev_dbg(fe->dvb->device, "%s: Retune requested, FESTATE_RETUNE\n", __func__); | 
|  | re_tune = true; | 
|  | fepriv->state = FESTATE_TUNED; | 
|  | } else { | 
|  | re_tune = false; | 
|  | } | 
|  |  | 
|  | if (fe->ops.tune) | 
|  | fe->ops.tune(fe, re_tune, fepriv->tune_mode_flags, &fepriv->delay, &s); | 
|  |  | 
|  | if (s != fepriv->status && !(fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT)) { | 
|  | dev_dbg(fe->dvb->device, "%s: state changed, adding current state\n", __func__); | 
|  | dvb_frontend_add_event(fe, s); | 
|  | fepriv->status = s; | 
|  | } | 
|  | break; | 
|  | case DVBFE_ALGO_SW: | 
|  | dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_SW\n", __func__); | 
|  | dvb_frontend_swzigzag(fe); | 
|  | break; | 
|  | case DVBFE_ALGO_CUSTOM: | 
|  | dev_dbg(fe->dvb->device, "%s: Frontend ALGO = DVBFE_ALGO_CUSTOM, state=%d\n", __func__, fepriv->state); | 
|  | if (fepriv->state & FESTATE_RETUNE) { | 
|  | dev_dbg(fe->dvb->device, "%s: Retune requested, FESTAT_RETUNE\n", __func__); | 
|  | fepriv->state = FESTATE_TUNED; | 
|  | } | 
|  | /* Case where we are going to search for a carrier | 
|  | * User asked us to retune again for some reason, possibly | 
|  | * requesting a search with a new set of parameters | 
|  | */ | 
|  | if (fepriv->algo_status & DVBFE_ALGO_SEARCH_AGAIN) { | 
|  | if (fe->ops.search) { | 
|  | fepriv->algo_status = fe->ops.search(fe); | 
|  | /* We did do a search as was requested, the flags are | 
|  | * now unset as well and has the flags wrt to search. | 
|  | */ | 
|  | } else { | 
|  | fepriv->algo_status &= ~DVBFE_ALGO_SEARCH_AGAIN; | 
|  | } | 
|  | } | 
|  | /* Track the carrier if the search was successful */ | 
|  | if (fepriv->algo_status != DVBFE_ALGO_SEARCH_SUCCESS) { | 
|  | fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; | 
|  | fepriv->delay = HZ / 2; | 
|  | } | 
|  | dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); | 
|  | fe->ops.read_status(fe, &s); | 
|  | if (s != fepriv->status) { | 
|  | dvb_frontend_add_event(fe, s); /* update event list */ | 
|  | fepriv->status = s; | 
|  | if (!(s & FE_HAS_LOCK)) { | 
|  | fepriv->delay = HZ / 10; | 
|  | fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; | 
|  | } else { | 
|  | fepriv->delay = 60 * HZ; | 
|  | } | 
|  | } | 
|  | break; | 
|  | default: | 
|  | dev_dbg(fe->dvb->device, "%s: UNDEFINED ALGO !\n", __func__); | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | dvb_frontend_swzigzag(fe); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (dvb_powerdown_on_sleep) { | 
|  | if (fe->ops.set_voltage) | 
|  | fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF); | 
|  | if (fe->ops.tuner_ops.sleep) { | 
|  | if (fe->ops.i2c_gate_ctrl) | 
|  | fe->ops.i2c_gate_ctrl(fe, 1); | 
|  | fe->ops.tuner_ops.sleep(fe); | 
|  | if (fe->ops.i2c_gate_ctrl) | 
|  | fe->ops.i2c_gate_ctrl(fe, 0); | 
|  | } | 
|  | if (fe->ops.sleep) | 
|  | fe->ops.sleep(fe); | 
|  | } | 
|  |  | 
|  | fepriv->thread = NULL; | 
|  | if (kthread_should_stop()) | 
|  | fe->exit = DVB_FE_DEVICE_REMOVED; | 
|  | else | 
|  | fe->exit = DVB_FE_NO_EXIT; | 
|  | mb(); | 
|  |  | 
|  | if (semheld) | 
|  | up(&fepriv->sem); | 
|  | dvb_frontend_wakeup(fe); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dvb_frontend_stop(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if (fe->exit != DVB_FE_DEVICE_REMOVED) | 
|  | fe->exit = DVB_FE_NORMAL_EXIT; | 
|  | mb(); | 
|  |  | 
|  | if (!fepriv->thread) | 
|  | return; | 
|  |  | 
|  | kthread_stop(fepriv->thread); | 
|  |  | 
|  | sema_init(&fepriv->sem, 1); | 
|  | fepriv->state = FESTATE_IDLE; | 
|  |  | 
|  | /* paranoia check in case a signal arrived */ | 
|  | if (fepriv->thread) | 
|  | dev_warn(fe->dvb->device, | 
|  | "dvb_frontend_stop: warning: thread %p won't exit\n", | 
|  | fepriv->thread); | 
|  | } | 
|  |  | 
|  | s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime) | 
|  | { | 
|  | return ((curtime.tv_usec < lasttime.tv_usec) ? | 
|  | 1000000 - lasttime.tv_usec + curtime.tv_usec : | 
|  | curtime.tv_usec - lasttime.tv_usec); | 
|  | } | 
|  | EXPORT_SYMBOL(timeval_usec_diff); | 
|  |  | 
|  | static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec) | 
|  | { | 
|  | curtime->tv_usec += add_usec; | 
|  | if (curtime->tv_usec >= 1000000) { | 
|  | curtime->tv_usec -= 1000000; | 
|  | curtime->tv_sec++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sleep until gettimeofday() > waketime + add_usec | 
|  | * This needs to be as precise as possible, but as the delay is | 
|  | * usually between 2ms and 32ms, it is done using a scheduled msleep | 
|  | * followed by usleep (normally a busy-wait loop) for the remainder | 
|  | */ | 
|  | void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec) | 
|  | { | 
|  | struct timeval lasttime; | 
|  | s32 delta, newdelta; | 
|  |  | 
|  | timeval_usec_add(waketime, add_usec); | 
|  |  | 
|  | do_gettimeofday(&lasttime); | 
|  | delta = timeval_usec_diff(lasttime, *waketime); | 
|  | if (delta > 2500) { | 
|  | msleep((delta - 1500) / 1000); | 
|  | do_gettimeofday(&lasttime); | 
|  | newdelta = timeval_usec_diff(lasttime, *waketime); | 
|  | delta = (newdelta > delta) ? 0 : newdelta; | 
|  | } | 
|  | if (delta > 0) | 
|  | udelay(delta); | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_frontend_sleep_until); | 
|  |  | 
|  | static int dvb_frontend_start(struct dvb_frontend *fe) | 
|  | { | 
|  | int ret; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct task_struct *fe_thread; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if (fepriv->thread) { | 
|  | if (fe->exit == DVB_FE_NO_EXIT) | 
|  | return 0; | 
|  | else | 
|  | dvb_frontend_stop (fe); | 
|  | } | 
|  |  | 
|  | if (signal_pending(current)) | 
|  | return -EINTR; | 
|  | if (down_interruptible (&fepriv->sem)) | 
|  | return -EINTR; | 
|  |  | 
|  | fepriv->state = FESTATE_IDLE; | 
|  | fe->exit = DVB_FE_NO_EXIT; | 
|  | fepriv->thread = NULL; | 
|  | mb(); | 
|  |  | 
|  | fe_thread = kthread_run(dvb_frontend_thread, fe, | 
|  | "kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id); | 
|  | if (IS_ERR(fe_thread)) { | 
|  | ret = PTR_ERR(fe_thread); | 
|  | dev_warn(fe->dvb->device, | 
|  | "dvb_frontend_start: failed to start kthread (%d)\n", | 
|  | ret); | 
|  | up(&fepriv->sem); | 
|  | return ret; | 
|  | } | 
|  | fepriv->thread = fe_thread; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void dvb_frontend_get_frequency_limits(struct dvb_frontend *fe, | 
|  | u32 *freq_min, u32 *freq_max) | 
|  | { | 
|  | *freq_min = max(fe->ops.info.frequency_min, fe->ops.tuner_ops.info.frequency_min); | 
|  |  | 
|  | if (fe->ops.info.frequency_max == 0) | 
|  | *freq_max = fe->ops.tuner_ops.info.frequency_max; | 
|  | else if (fe->ops.tuner_ops.info.frequency_max == 0) | 
|  | *freq_max = fe->ops.info.frequency_max; | 
|  | else | 
|  | *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max); | 
|  |  | 
|  | if (*freq_min == 0 || *freq_max == 0) | 
|  | dev_warn(fe->dvb->device, "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n", | 
|  | fe->dvb->num, fe->id); | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_check_parameters(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | u32 freq_min; | 
|  | u32 freq_max; | 
|  |  | 
|  | /* range check: frequency */ | 
|  | dvb_frontend_get_frequency_limits(fe, &freq_min, &freq_max); | 
|  | if ((freq_min && c->frequency < freq_min) || | 
|  | (freq_max && c->frequency > freq_max)) { | 
|  | dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n", | 
|  | fe->dvb->num, fe->id, c->frequency, | 
|  | freq_min, freq_max); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* range check: symbol rate */ | 
|  | switch (c->delivery_system) { | 
|  | case SYS_DVBS: | 
|  | case SYS_DVBS2: | 
|  | case SYS_TURBO: | 
|  | case SYS_DVBC_ANNEX_A: | 
|  | case SYS_DVBC_ANNEX_C: | 
|  | if ((fe->ops.info.symbol_rate_min && | 
|  | c->symbol_rate < fe->ops.info.symbol_rate_min) || | 
|  | (fe->ops.info.symbol_rate_max && | 
|  | c->symbol_rate > fe->ops.info.symbol_rate_max)) { | 
|  | dev_warn(fe->dvb->device, "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", | 
|  | fe->dvb->num, fe->id, c->symbol_rate, | 
|  | fe->ops.info.symbol_rate_min, | 
|  | fe->ops.info.symbol_rate_max); | 
|  | return -EINVAL; | 
|  | } | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_clear_cache(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | int i; | 
|  | u32 delsys; | 
|  |  | 
|  | delsys = c->delivery_system; | 
|  | memset(c, 0, offsetof(struct dtv_frontend_properties, strength)); | 
|  | c->delivery_system = delsys; | 
|  |  | 
|  | c->state = DTV_CLEAR; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s: Clearing cache for delivery system %d\n", | 
|  | __func__, c->delivery_system); | 
|  |  | 
|  | c->transmission_mode = TRANSMISSION_MODE_AUTO; | 
|  | c->bandwidth_hz = 0;	/* AUTO */ | 
|  | c->guard_interval = GUARD_INTERVAL_AUTO; | 
|  | c->hierarchy = HIERARCHY_AUTO; | 
|  | c->symbol_rate = 0; | 
|  | c->code_rate_HP = FEC_AUTO; | 
|  | c->code_rate_LP = FEC_AUTO; | 
|  | c->fec_inner = FEC_AUTO; | 
|  | c->rolloff = ROLLOFF_AUTO; | 
|  | c->voltage = SEC_VOLTAGE_OFF; | 
|  | c->sectone = SEC_TONE_OFF; | 
|  | c->pilot = PILOT_AUTO; | 
|  |  | 
|  | c->isdbt_partial_reception = 0; | 
|  | c->isdbt_sb_mode = 0; | 
|  | c->isdbt_sb_subchannel = 0; | 
|  | c->isdbt_sb_segment_idx = 0; | 
|  | c->isdbt_sb_segment_count = 0; | 
|  | c->isdbt_layer_enabled = 0; | 
|  | for (i = 0; i < 3; i++) { | 
|  | c->layer[i].fec = FEC_AUTO; | 
|  | c->layer[i].modulation = QAM_AUTO; | 
|  | c->layer[i].interleaving = 0; | 
|  | c->layer[i].segment_count = 0; | 
|  | } | 
|  |  | 
|  | c->stream_id = NO_STREAM_ID_FILTER; | 
|  |  | 
|  | switch (c->delivery_system) { | 
|  | case SYS_DVBS: | 
|  | case SYS_DVBS2: | 
|  | case SYS_TURBO: | 
|  | c->modulation = QPSK;   /* implied for DVB-S in legacy API */ | 
|  | c->rolloff = ROLLOFF_35;/* implied for DVB-S */ | 
|  | break; | 
|  | case SYS_ATSC: | 
|  | c->modulation = VSB_8; | 
|  | break; | 
|  | case SYS_ISDBS: | 
|  | c->symbol_rate = 28860000; | 
|  | c->rolloff = ROLLOFF_35; | 
|  | c->bandwidth_hz = c->symbol_rate / 100 * 135; | 
|  | break; | 
|  | default: | 
|  | c->modulation = QAM_AUTO; | 
|  | break; | 
|  | } | 
|  |  | 
|  | c->lna = LNA_AUTO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define _DTV_CMD(n, s, b) \ | 
|  | [n] = { \ | 
|  | .name = #n, \ | 
|  | .cmd  = n, \ | 
|  | .set  = s,\ | 
|  | .buffer = b \ | 
|  | } | 
|  |  | 
|  | static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { | 
|  | _DTV_CMD(DTV_TUNE, 1, 0), | 
|  | _DTV_CMD(DTV_CLEAR, 1, 0), | 
|  |  | 
|  | /* Set */ | 
|  | _DTV_CMD(DTV_FREQUENCY, 1, 0), | 
|  | _DTV_CMD(DTV_BANDWIDTH_HZ, 1, 0), | 
|  | _DTV_CMD(DTV_MODULATION, 1, 0), | 
|  | _DTV_CMD(DTV_INVERSION, 1, 0), | 
|  | _DTV_CMD(DTV_DISEQC_MASTER, 1, 1), | 
|  | _DTV_CMD(DTV_SYMBOL_RATE, 1, 0), | 
|  | _DTV_CMD(DTV_INNER_FEC, 1, 0), | 
|  | _DTV_CMD(DTV_VOLTAGE, 1, 0), | 
|  | _DTV_CMD(DTV_TONE, 1, 0), | 
|  | _DTV_CMD(DTV_PILOT, 1, 0), | 
|  | _DTV_CMD(DTV_ROLLOFF, 1, 0), | 
|  | _DTV_CMD(DTV_DELIVERY_SYSTEM, 1, 0), | 
|  | _DTV_CMD(DTV_HIERARCHY, 1, 0), | 
|  | _DTV_CMD(DTV_CODE_RATE_HP, 1, 0), | 
|  | _DTV_CMD(DTV_CODE_RATE_LP, 1, 0), | 
|  | _DTV_CMD(DTV_GUARD_INTERVAL, 1, 0), | 
|  | _DTV_CMD(DTV_TRANSMISSION_MODE, 1, 0), | 
|  | _DTV_CMD(DTV_INTERLEAVING, 1, 0), | 
|  |  | 
|  | _DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERB_FEC, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERC_FEC, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0), | 
|  | _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0), | 
|  |  | 
|  | _DTV_CMD(DTV_STREAM_ID, 1, 0), | 
|  | _DTV_CMD(DTV_DVBT2_PLP_ID_LEGACY, 1, 0), | 
|  | _DTV_CMD(DTV_LNA, 1, 0), | 
|  |  | 
|  | /* Get */ | 
|  | _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1), | 
|  | _DTV_CMD(DTV_API_VERSION, 0, 0), | 
|  |  | 
|  | _DTV_CMD(DTV_ENUM_DELSYS, 0, 0), | 
|  |  | 
|  | _DTV_CMD(DTV_ATSCMH_PARADE_ID, 1, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_RS_FRAME_ENSEMBLE, 1, 0), | 
|  |  | 
|  | _DTV_CMD(DTV_ATSCMH_FIC_VER, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_NOG, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_TNOG, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_SGN, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_PRC, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_RS_FRAME_MODE, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_PRI, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_RS_CODE_MODE_SEC, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_SCCC_BLOCK_MODE, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_A, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_B, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_C, 0, 0), | 
|  | _DTV_CMD(DTV_ATSCMH_SCCC_CODE_MODE_D, 0, 0), | 
|  |  | 
|  | /* Statistics API */ | 
|  | _DTV_CMD(DTV_STAT_SIGNAL_STRENGTH, 0, 0), | 
|  | _DTV_CMD(DTV_STAT_CNR, 0, 0), | 
|  | _DTV_CMD(DTV_STAT_PRE_ERROR_BIT_COUNT, 0, 0), | 
|  | _DTV_CMD(DTV_STAT_PRE_TOTAL_BIT_COUNT, 0, 0), | 
|  | _DTV_CMD(DTV_STAT_POST_ERROR_BIT_COUNT, 0, 0), | 
|  | _DTV_CMD(DTV_STAT_POST_TOTAL_BIT_COUNT, 0, 0), | 
|  | _DTV_CMD(DTV_STAT_ERROR_BLOCK_COUNT, 0, 0), | 
|  | _DTV_CMD(DTV_STAT_TOTAL_BLOCK_COUNT, 0, 0), | 
|  | }; | 
|  |  | 
|  | static void dtv_property_dump(struct dvb_frontend *fe, struct dtv_property *tvp) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) { | 
|  | dev_warn(fe->dvb->device, "%s: tvp.cmd = 0x%08x undefined\n", | 
|  | __func__, tvp->cmd); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s: tvp.cmd    = 0x%08x (%s)\n", __func__, | 
|  | tvp->cmd, dtv_cmds[tvp->cmd].name); | 
|  |  | 
|  | if (dtv_cmds[tvp->cmd].buffer) { | 
|  | dev_dbg(fe->dvb->device, "%s: tvp.u.buffer.len = 0x%02x\n", | 
|  | __func__, tvp->u.buffer.len); | 
|  |  | 
|  | for(i = 0; i < tvp->u.buffer.len; i++) | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: tvp.u.buffer.data[0x%02x] = 0x%02x\n", | 
|  | __func__, i, tvp->u.buffer.data[i]); | 
|  | } else { | 
|  | dev_dbg(fe->dvb->device, "%s: tvp.u.data = 0x%08x\n", __func__, | 
|  | tvp->u.data); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Synchronise the legacy tuning parameters into the cache, so that demodulator | 
|  | * drivers can use a single set_frontend tuning function, regardless of whether | 
|  | * it's being used for the legacy or new API, reducing code and complexity. | 
|  | */ | 
|  | static int dtv_property_cache_sync(struct dvb_frontend *fe, | 
|  | struct dtv_frontend_properties *c, | 
|  | const struct dvb_frontend_parameters *p) | 
|  | { | 
|  | c->frequency = p->frequency; | 
|  | c->inversion = p->inversion; | 
|  |  | 
|  | switch (dvbv3_type(c->delivery_system)) { | 
|  | case DVBV3_QPSK: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); | 
|  | c->symbol_rate = p->u.qpsk.symbol_rate; | 
|  | c->fec_inner = p->u.qpsk.fec_inner; | 
|  | break; | 
|  | case DVBV3_QAM: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); | 
|  | c->symbol_rate = p->u.qam.symbol_rate; | 
|  | c->fec_inner = p->u.qam.fec_inner; | 
|  | c->modulation = p->u.qam.modulation; | 
|  | break; | 
|  | case DVBV3_OFDM: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); | 
|  |  | 
|  | switch (p->u.ofdm.bandwidth) { | 
|  | case BANDWIDTH_10_MHZ: | 
|  | c->bandwidth_hz = 10000000; | 
|  | break; | 
|  | case BANDWIDTH_8_MHZ: | 
|  | c->bandwidth_hz = 8000000; | 
|  | break; | 
|  | case BANDWIDTH_7_MHZ: | 
|  | c->bandwidth_hz = 7000000; | 
|  | break; | 
|  | case BANDWIDTH_6_MHZ: | 
|  | c->bandwidth_hz = 6000000; | 
|  | break; | 
|  | case BANDWIDTH_5_MHZ: | 
|  | c->bandwidth_hz = 5000000; | 
|  | break; | 
|  | case BANDWIDTH_1_712_MHZ: | 
|  | c->bandwidth_hz = 1712000; | 
|  | break; | 
|  | case BANDWIDTH_AUTO: | 
|  | c->bandwidth_hz = 0; | 
|  | } | 
|  |  | 
|  | c->code_rate_HP = p->u.ofdm.code_rate_HP; | 
|  | c->code_rate_LP = p->u.ofdm.code_rate_LP; | 
|  | c->modulation = p->u.ofdm.constellation; | 
|  | c->transmission_mode = p->u.ofdm.transmission_mode; | 
|  | c->guard_interval = p->u.ofdm.guard_interval; | 
|  | c->hierarchy = p->u.ofdm.hierarchy_information; | 
|  | break; | 
|  | case DVBV3_ATSC: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing ATSC req\n", __func__); | 
|  | c->modulation = p->u.vsb.modulation; | 
|  | if (c->delivery_system == SYS_ATSCMH) | 
|  | break; | 
|  | if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) | 
|  | c->delivery_system = SYS_ATSC; | 
|  | else | 
|  | c->delivery_system = SYS_DVBC_ANNEX_B; | 
|  | break; | 
|  | case DVBV3_UNKNOWN: | 
|  | dev_err(fe->dvb->device, | 
|  | "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", | 
|  | __func__, c->delivery_system); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Ensure the cached values are set correctly in the frontend | 
|  | * legacy tuning structures, for the advanced tuning API. | 
|  | */ | 
|  | static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_parameters *p) | 
|  | { | 
|  | const struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  |  | 
|  | p->frequency = c->frequency; | 
|  | p->inversion = c->inversion; | 
|  |  | 
|  | switch (dvbv3_type(c->delivery_system)) { | 
|  | case DVBV3_UNKNOWN: | 
|  | dev_err(fe->dvb->device, | 
|  | "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", | 
|  | __func__, c->delivery_system); | 
|  | return -EINVAL; | 
|  | case DVBV3_QPSK: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing QPSK req\n", __func__); | 
|  | p->u.qpsk.symbol_rate = c->symbol_rate; | 
|  | p->u.qpsk.fec_inner = c->fec_inner; | 
|  | break; | 
|  | case DVBV3_QAM: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing QAM req\n", __func__); | 
|  | p->u.qam.symbol_rate = c->symbol_rate; | 
|  | p->u.qam.fec_inner = c->fec_inner; | 
|  | p->u.qam.modulation = c->modulation; | 
|  | break; | 
|  | case DVBV3_OFDM: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing OFDM req\n", __func__); | 
|  | switch (c->bandwidth_hz) { | 
|  | case 10000000: | 
|  | p->u.ofdm.bandwidth = BANDWIDTH_10_MHZ; | 
|  | break; | 
|  | case 8000000: | 
|  | p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; | 
|  | break; | 
|  | case 7000000: | 
|  | p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; | 
|  | break; | 
|  | case 6000000: | 
|  | p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; | 
|  | break; | 
|  | case 5000000: | 
|  | p->u.ofdm.bandwidth = BANDWIDTH_5_MHZ; | 
|  | break; | 
|  | case 1712000: | 
|  | p->u.ofdm.bandwidth = BANDWIDTH_1_712_MHZ; | 
|  | break; | 
|  | case 0: | 
|  | default: | 
|  | p->u.ofdm.bandwidth = BANDWIDTH_AUTO; | 
|  | } | 
|  | p->u.ofdm.code_rate_HP = c->code_rate_HP; | 
|  | p->u.ofdm.code_rate_LP = c->code_rate_LP; | 
|  | p->u.ofdm.constellation = c->modulation; | 
|  | p->u.ofdm.transmission_mode = c->transmission_mode; | 
|  | p->u.ofdm.guard_interval = c->guard_interval; | 
|  | p->u.ofdm.hierarchy_information = c->hierarchy; | 
|  | break; | 
|  | case DVBV3_ATSC: | 
|  | dev_dbg(fe->dvb->device, "%s: Preparing VSB req\n", __func__); | 
|  | p->u.vsb.modulation = c->modulation; | 
|  | break; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * dtv_get_frontend - calls a callback for retrieving DTV parameters | 
|  | * @fe:		struct dvb_frontend pointer | 
|  | * @c:		struct dtv_frontend_properties pointer (DVBv5 cache) | 
|  | * @p_out	struct dvb_frontend_parameters pointer (DVBv3 FE struct) | 
|  | * | 
|  | * This routine calls either the DVBv3 or DVBv5 get_frontend call. | 
|  | * If c is not null, it will update the DVBv5 cache struct pointed by it. | 
|  | * If p_out is not null, it will update the DVBv3 params pointed by it. | 
|  | */ | 
|  | static int dtv_get_frontend(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_parameters *p_out) | 
|  | { | 
|  | int r; | 
|  |  | 
|  | if (fe->ops.get_frontend) { | 
|  | r = fe->ops.get_frontend(fe); | 
|  | if (unlikely(r < 0)) | 
|  | return r; | 
|  | if (p_out) | 
|  | dtv_property_legacy_params_sync(fe, p_out); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* As everything is in cache, get_frontend fops are always supported */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_ioctl_legacy(struct file *file, | 
|  | unsigned int cmd, void *parg); | 
|  | static int dvb_frontend_ioctl_properties(struct file *file, | 
|  | unsigned int cmd, void *parg); | 
|  |  | 
|  | static int dtv_property_process_get(struct dvb_frontend *fe, | 
|  | const struct dtv_frontend_properties *c, | 
|  | struct dtv_property *tvp, | 
|  | struct file *file) | 
|  | { | 
|  | int r, ncaps; | 
|  |  | 
|  | switch(tvp->cmd) { | 
|  | case DTV_ENUM_DELSYS: | 
|  | ncaps = 0; | 
|  | while (ncaps < MAX_DELSYS && fe->ops.delsys[ncaps]) { | 
|  | tvp->u.buffer.data[ncaps] = fe->ops.delsys[ncaps]; | 
|  | ncaps++; | 
|  | } | 
|  | tvp->u.buffer.len = ncaps; | 
|  | break; | 
|  | case DTV_FREQUENCY: | 
|  | tvp->u.data = c->frequency; | 
|  | break; | 
|  | case DTV_MODULATION: | 
|  | tvp->u.data = c->modulation; | 
|  | break; | 
|  | case DTV_BANDWIDTH_HZ: | 
|  | tvp->u.data = c->bandwidth_hz; | 
|  | break; | 
|  | case DTV_INVERSION: | 
|  | tvp->u.data = c->inversion; | 
|  | break; | 
|  | case DTV_SYMBOL_RATE: | 
|  | tvp->u.data = c->symbol_rate; | 
|  | break; | 
|  | case DTV_INNER_FEC: | 
|  | tvp->u.data = c->fec_inner; | 
|  | break; | 
|  | case DTV_PILOT: | 
|  | tvp->u.data = c->pilot; | 
|  | break; | 
|  | case DTV_ROLLOFF: | 
|  | tvp->u.data = c->rolloff; | 
|  | break; | 
|  | case DTV_DELIVERY_SYSTEM: | 
|  | tvp->u.data = c->delivery_system; | 
|  | break; | 
|  | case DTV_VOLTAGE: | 
|  | tvp->u.data = c->voltage; | 
|  | break; | 
|  | case DTV_TONE: | 
|  | tvp->u.data = c->sectone; | 
|  | break; | 
|  | case DTV_API_VERSION: | 
|  | tvp->u.data = (DVB_API_VERSION << 8) | DVB_API_VERSION_MINOR; | 
|  | break; | 
|  | case DTV_CODE_RATE_HP: | 
|  | tvp->u.data = c->code_rate_HP; | 
|  | break; | 
|  | case DTV_CODE_RATE_LP: | 
|  | tvp->u.data = c->code_rate_LP; | 
|  | break; | 
|  | case DTV_GUARD_INTERVAL: | 
|  | tvp->u.data = c->guard_interval; | 
|  | break; | 
|  | case DTV_TRANSMISSION_MODE: | 
|  | tvp->u.data = c->transmission_mode; | 
|  | break; | 
|  | case DTV_HIERARCHY: | 
|  | tvp->u.data = c->hierarchy; | 
|  | break; | 
|  | case DTV_INTERLEAVING: | 
|  | tvp->u.data = c->interleaving; | 
|  | break; | 
|  |  | 
|  | /* ISDB-T Support here */ | 
|  | case DTV_ISDBT_PARTIAL_RECEPTION: | 
|  | tvp->u.data = c->isdbt_partial_reception; | 
|  | break; | 
|  | case DTV_ISDBT_SOUND_BROADCASTING: | 
|  | tvp->u.data = c->isdbt_sb_mode; | 
|  | break; | 
|  | case DTV_ISDBT_SB_SUBCHANNEL_ID: | 
|  | tvp->u.data = c->isdbt_sb_subchannel; | 
|  | break; | 
|  | case DTV_ISDBT_SB_SEGMENT_IDX: | 
|  | tvp->u.data = c->isdbt_sb_segment_idx; | 
|  | break; | 
|  | case DTV_ISDBT_SB_SEGMENT_COUNT: | 
|  | tvp->u.data = c->isdbt_sb_segment_count; | 
|  | break; | 
|  | case DTV_ISDBT_LAYER_ENABLED: | 
|  | tvp->u.data = c->isdbt_layer_enabled; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_FEC: | 
|  | tvp->u.data = c->layer[0].fec; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_MODULATION: | 
|  | tvp->u.data = c->layer[0].modulation; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_SEGMENT_COUNT: | 
|  | tvp->u.data = c->layer[0].segment_count; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: | 
|  | tvp->u.data = c->layer[0].interleaving; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_FEC: | 
|  | tvp->u.data = c->layer[1].fec; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_MODULATION: | 
|  | tvp->u.data = c->layer[1].modulation; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_SEGMENT_COUNT: | 
|  | tvp->u.data = c->layer[1].segment_count; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: | 
|  | tvp->u.data = c->layer[1].interleaving; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_FEC: | 
|  | tvp->u.data = c->layer[2].fec; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_MODULATION: | 
|  | tvp->u.data = c->layer[2].modulation; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_SEGMENT_COUNT: | 
|  | tvp->u.data = c->layer[2].segment_count; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: | 
|  | tvp->u.data = c->layer[2].interleaving; | 
|  | break; | 
|  |  | 
|  | /* Multistream support */ | 
|  | case DTV_STREAM_ID: | 
|  | case DTV_DVBT2_PLP_ID_LEGACY: | 
|  | tvp->u.data = c->stream_id; | 
|  | break; | 
|  |  | 
|  | /* ATSC-MH */ | 
|  | case DTV_ATSCMH_FIC_VER: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_fic_ver; | 
|  | break; | 
|  | case DTV_ATSCMH_PARADE_ID: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_parade_id; | 
|  | break; | 
|  | case DTV_ATSCMH_NOG: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_nog; | 
|  | break; | 
|  | case DTV_ATSCMH_TNOG: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_tnog; | 
|  | break; | 
|  | case DTV_ATSCMH_SGN: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_sgn; | 
|  | break; | 
|  | case DTV_ATSCMH_PRC: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_prc; | 
|  | break; | 
|  | case DTV_ATSCMH_RS_FRAME_MODE: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_mode; | 
|  | break; | 
|  | case DTV_ATSCMH_RS_FRAME_ENSEMBLE: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_rs_frame_ensemble; | 
|  | break; | 
|  | case DTV_ATSCMH_RS_CODE_MODE_PRI: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_pri; | 
|  | break; | 
|  | case DTV_ATSCMH_RS_CODE_MODE_SEC: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_rs_code_mode_sec; | 
|  | break; | 
|  | case DTV_ATSCMH_SCCC_BLOCK_MODE: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_sccc_block_mode; | 
|  | break; | 
|  | case DTV_ATSCMH_SCCC_CODE_MODE_A: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_a; | 
|  | break; | 
|  | case DTV_ATSCMH_SCCC_CODE_MODE_B: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_b; | 
|  | break; | 
|  | case DTV_ATSCMH_SCCC_CODE_MODE_C: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_c; | 
|  | break; | 
|  | case DTV_ATSCMH_SCCC_CODE_MODE_D: | 
|  | tvp->u.data = fe->dtv_property_cache.atscmh_sccc_code_mode_d; | 
|  | break; | 
|  |  | 
|  | case DTV_LNA: | 
|  | tvp->u.data = c->lna; | 
|  | break; | 
|  |  | 
|  | /* Fill quality measures */ | 
|  | case DTV_STAT_SIGNAL_STRENGTH: | 
|  | tvp->u.st = c->strength; | 
|  | break; | 
|  | case DTV_STAT_CNR: | 
|  | tvp->u.st = c->cnr; | 
|  | break; | 
|  | case DTV_STAT_PRE_ERROR_BIT_COUNT: | 
|  | tvp->u.st = c->pre_bit_error; | 
|  | break; | 
|  | case DTV_STAT_PRE_TOTAL_BIT_COUNT: | 
|  | tvp->u.st = c->pre_bit_count; | 
|  | break; | 
|  | case DTV_STAT_POST_ERROR_BIT_COUNT: | 
|  | tvp->u.st = c->post_bit_error; | 
|  | break; | 
|  | case DTV_STAT_POST_TOTAL_BIT_COUNT: | 
|  | tvp->u.st = c->post_bit_count; | 
|  | break; | 
|  | case DTV_STAT_ERROR_BLOCK_COUNT: | 
|  | tvp->u.st = c->block_error; | 
|  | break; | 
|  | case DTV_STAT_TOTAL_BLOCK_COUNT: | 
|  | tvp->u.st = c->block_count; | 
|  | break; | 
|  | default: | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: FE property %d doesn't exist\n", | 
|  | __func__, tvp->cmd); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Allow the frontend to override outgoing properties */ | 
|  | if (fe->ops.get_property) { | 
|  | r = fe->ops.get_property(fe, tvp); | 
|  | if (r < 0) | 
|  | return r; | 
|  | } | 
|  |  | 
|  | dtv_property_dump(fe, tvp); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dtv_set_frontend(struct dvb_frontend *fe); | 
|  |  | 
|  | static bool is_dvbv3_delsys(u32 delsys) | 
|  | { | 
|  | bool status; | 
|  |  | 
|  | status = (delsys == SYS_DVBT) || (delsys == SYS_DVBC_ANNEX_A) || | 
|  | (delsys == SYS_DVBS) || (delsys == SYS_ATSC); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * emulate_delivery_system - emulate a DVBv5 delivery system with a DVBv3 type | 
|  | * @fe:			struct frontend; | 
|  | * @delsys:			DVBv5 type that will be used for emulation | 
|  | * | 
|  | * Provides emulation for delivery systems that are compatible with the old | 
|  | * DVBv3 call. Among its usages, it provices support for ISDB-T, and allows | 
|  | * using a DVB-S2 only frontend just like it were a DVB-S, if the frontent | 
|  | * parameters are compatible with DVB-S spec. | 
|  | */ | 
|  | static int emulate_delivery_system(struct dvb_frontend *fe, u32 delsys) | 
|  | { | 
|  | int i; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  |  | 
|  | c->delivery_system = delsys; | 
|  |  | 
|  | /* | 
|  | * If the call is for ISDB-T, put it into full-seg, auto mode, TV | 
|  | */ | 
|  | if (c->delivery_system == SYS_ISDBT) { | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: Using defaults for SYS_ISDBT\n", | 
|  | __func__); | 
|  |  | 
|  | if (!c->bandwidth_hz) | 
|  | c->bandwidth_hz = 6000000; | 
|  |  | 
|  | c->isdbt_partial_reception = 0; | 
|  | c->isdbt_sb_mode = 0; | 
|  | c->isdbt_sb_subchannel = 0; | 
|  | c->isdbt_sb_segment_idx = 0; | 
|  | c->isdbt_sb_segment_count = 0; | 
|  | c->isdbt_layer_enabled = 7; | 
|  | for (i = 0; i < 3; i++) { | 
|  | c->layer[i].fec = FEC_AUTO; | 
|  | c->layer[i].modulation = QAM_AUTO; | 
|  | c->layer[i].interleaving = 0; | 
|  | c->layer[i].segment_count = 0; | 
|  | } | 
|  | } | 
|  | dev_dbg(fe->dvb->device, "%s: change delivery system on cache to %d\n", | 
|  | __func__, c->delivery_system); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * dvbv5_set_delivery_system - Sets the delivery system for a DVBv5 API call | 
|  | * @fe:			frontend struct | 
|  | * @desired_system:	delivery system requested by the user | 
|  | * | 
|  | * A DVBv5 call know what's the desired system it wants. So, set it. | 
|  | * | 
|  | * There are, however, a few known issues with early DVBv5 applications that | 
|  | * are also handled by this logic: | 
|  | * | 
|  | * 1) Some early apps use SYS_UNDEFINED as the desired delivery system. | 
|  | *    This is an API violation, but, as we don't want to break userspace, | 
|  | *    convert it to the first supported delivery system. | 
|  | * 2) Some apps might be using a DVBv5 call in a wrong way, passing, for | 
|  | *    example, SYS_DVBT instead of SYS_ISDBT. This is because early usage of | 
|  | *    ISDB-T provided backward compat with DVB-T. | 
|  | */ | 
|  | static int dvbv5_set_delivery_system(struct dvb_frontend *fe, | 
|  | u32 desired_system) | 
|  | { | 
|  | int ncaps; | 
|  | u32 delsys = SYS_UNDEFINED; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | enum dvbv3_emulation_type type; | 
|  |  | 
|  | /* | 
|  | * It was reported that some old DVBv5 applications were | 
|  | * filling delivery_system with SYS_UNDEFINED. If this happens, | 
|  | * assume that the application wants to use the first supported | 
|  | * delivery system. | 
|  | */ | 
|  | if (desired_system == SYS_UNDEFINED) | 
|  | desired_system = fe->ops.delsys[0]; | 
|  |  | 
|  | /* | 
|  | * This is a DVBv5 call. So, it likely knows the supported | 
|  | * delivery systems. So, check if the desired delivery system is | 
|  | * supported | 
|  | */ | 
|  | ncaps = 0; | 
|  | while (ncaps < MAX_DELSYS && fe->ops.delsys[ncaps]) { | 
|  | if (fe->ops.delsys[ncaps] == desired_system) { | 
|  | c->delivery_system = desired_system; | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: Changing delivery system to %d\n", | 
|  | __func__, desired_system); | 
|  | return 0; | 
|  | } | 
|  | ncaps++; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The requested delivery system isn't supported. Maybe userspace | 
|  | * is requesting a DVBv3 compatible delivery system. | 
|  | * | 
|  | * The emulation only works if the desired system is one of the | 
|  | * delivery systems supported by DVBv3 API | 
|  | */ | 
|  | if (!is_dvbv3_delsys(desired_system)) { | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: Delivery system %d not supported.\n", | 
|  | __func__, desired_system); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | type = dvbv3_type(desired_system); | 
|  |  | 
|  | /* | 
|  | * Get the last non-DVBv3 delivery system that has the same type | 
|  | * of the desired system | 
|  | */ | 
|  | ncaps = 0; | 
|  | while (ncaps < MAX_DELSYS && fe->ops.delsys[ncaps]) { | 
|  | if (dvbv3_type(fe->ops.delsys[ncaps]) == type) | 
|  | delsys = fe->ops.delsys[ncaps]; | 
|  | ncaps++; | 
|  | } | 
|  |  | 
|  | /* There's nothing compatible with the desired delivery system */ | 
|  | if (delsys == SYS_UNDEFINED) { | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: Delivery system %d not supported on emulation mode.\n", | 
|  | __func__, desired_system); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: Using delivery system %d emulated as if it were %d\n", | 
|  | __func__, delsys, desired_system); | 
|  |  | 
|  | return emulate_delivery_system(fe, desired_system); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * dvbv3_set_delivery_system - Sets the delivery system for a DVBv3 API call | 
|  | * @fe:	frontend struct | 
|  | * | 
|  | * A DVBv3 call doesn't know what's the desired system it wants. It also | 
|  | * doesn't allow to switch between different types. Due to that, userspace | 
|  | * should use DVBv5 instead. | 
|  | * However, in order to avoid breaking userspace API, limited backward | 
|  | * compatibility support is provided. | 
|  | * | 
|  | * There are some delivery systems that are incompatible with DVBv3 calls. | 
|  | * | 
|  | * This routine should work fine for frontends that support just one delivery | 
|  | * system. | 
|  | * | 
|  | * For frontends that support multiple frontends: | 
|  | * 1) It defaults to use the first supported delivery system. There's an | 
|  | *    userspace application that allows changing it at runtime; | 
|  | * | 
|  | * 2) If the current delivery system is not compatible with DVBv3, it gets | 
|  | *    the first one that it is compatible. | 
|  | * | 
|  | * NOTE: in order for this to work with applications like Kaffeine that | 
|  | *	uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to | 
|  | *	DVB-S, drivers that support both DVB-S and DVB-S2 should have the | 
|  | *	SYS_DVBS entry before the SYS_DVBS2, otherwise it won't switch back | 
|  | *	to DVB-S. | 
|  | */ | 
|  | static int dvbv3_set_delivery_system(struct dvb_frontend *fe) | 
|  | { | 
|  | int ncaps; | 
|  | u32 delsys = SYS_UNDEFINED; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  |  | 
|  | /* If not set yet, defaults to the first supported delivery system */ | 
|  | if (c->delivery_system == SYS_UNDEFINED) | 
|  | c->delivery_system = fe->ops.delsys[0]; | 
|  |  | 
|  | /* | 
|  | * Trivial case: just use the current one, if it already a DVBv3 | 
|  | * delivery system | 
|  | */ | 
|  | if (is_dvbv3_delsys(c->delivery_system)) { | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: Using delivery system to %d\n", | 
|  | __func__, c->delivery_system); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Seek for the first delivery system that it is compatible with a | 
|  | * DVBv3 standard | 
|  | */ | 
|  | ncaps = 0; | 
|  | while (ncaps < MAX_DELSYS && fe->ops.delsys[ncaps]) { | 
|  | if (dvbv3_type(fe->ops.delsys[ncaps]) != DVBV3_UNKNOWN) { | 
|  | delsys = fe->ops.delsys[ncaps]; | 
|  | break; | 
|  | } | 
|  | ncaps++; | 
|  | } | 
|  | if (delsys == SYS_UNDEFINED) { | 
|  | dev_dbg(fe->dvb->device, | 
|  | "%s: Couldn't find a delivery system that works with FE_SET_FRONTEND\n", | 
|  | __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  | return emulate_delivery_system(fe, delsys); | 
|  | } | 
|  |  | 
|  | static int dtv_property_process_set(struct dvb_frontend *fe, | 
|  | struct dtv_property *tvp, | 
|  | struct file *file) | 
|  | { | 
|  | int r = 0; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  |  | 
|  | /* Allow the frontend to validate incoming properties */ | 
|  | if (fe->ops.set_property) { | 
|  | r = fe->ops.set_property(fe, tvp); | 
|  | if (r < 0) | 
|  | return r; | 
|  | } | 
|  |  | 
|  | switch(tvp->cmd) { | 
|  | case DTV_CLEAR: | 
|  | /* | 
|  | * Reset a cache of data specific to the frontend here. This does | 
|  | * not effect hardware. | 
|  | */ | 
|  | dvb_frontend_clear_cache(fe); | 
|  | break; | 
|  | case DTV_TUNE: | 
|  | /* interpret the cache of data, build either a traditional frontend | 
|  | * tunerequest so we can pass validation in the FE_SET_FRONTEND | 
|  | * ioctl. | 
|  | */ | 
|  | c->state = tvp->cmd; | 
|  | dev_dbg(fe->dvb->device, "%s: Finalised property cache\n", | 
|  | __func__); | 
|  |  | 
|  | r = dtv_set_frontend(fe); | 
|  | break; | 
|  | case DTV_FREQUENCY: | 
|  | c->frequency = tvp->u.data; | 
|  | break; | 
|  | case DTV_MODULATION: | 
|  | c->modulation = tvp->u.data; | 
|  | break; | 
|  | case DTV_BANDWIDTH_HZ: | 
|  | c->bandwidth_hz = tvp->u.data; | 
|  | break; | 
|  | case DTV_INVERSION: | 
|  | c->inversion = tvp->u.data; | 
|  | break; | 
|  | case DTV_SYMBOL_RATE: | 
|  | c->symbol_rate = tvp->u.data; | 
|  | break; | 
|  | case DTV_INNER_FEC: | 
|  | c->fec_inner = tvp->u.data; | 
|  | break; | 
|  | case DTV_PILOT: | 
|  | c->pilot = tvp->u.data; | 
|  | break; | 
|  | case DTV_ROLLOFF: | 
|  | c->rolloff = tvp->u.data; | 
|  | break; | 
|  | case DTV_DELIVERY_SYSTEM: | 
|  | r = dvbv5_set_delivery_system(fe, tvp->u.data); | 
|  | break; | 
|  | case DTV_VOLTAGE: | 
|  | c->voltage = tvp->u.data; | 
|  | r = dvb_frontend_ioctl_legacy(file, FE_SET_VOLTAGE, | 
|  | (void *)c->voltage); | 
|  | break; | 
|  | case DTV_TONE: | 
|  | c->sectone = tvp->u.data; | 
|  | r = dvb_frontend_ioctl_legacy(file, FE_SET_TONE, | 
|  | (void *)c->sectone); | 
|  | break; | 
|  | case DTV_CODE_RATE_HP: | 
|  | c->code_rate_HP = tvp->u.data; | 
|  | break; | 
|  | case DTV_CODE_RATE_LP: | 
|  | c->code_rate_LP = tvp->u.data; | 
|  | break; | 
|  | case DTV_GUARD_INTERVAL: | 
|  | c->guard_interval = tvp->u.data; | 
|  | break; | 
|  | case DTV_TRANSMISSION_MODE: | 
|  | c->transmission_mode = tvp->u.data; | 
|  | break; | 
|  | case DTV_HIERARCHY: | 
|  | c->hierarchy = tvp->u.data; | 
|  | break; | 
|  | case DTV_INTERLEAVING: | 
|  | c->interleaving = tvp->u.data; | 
|  | break; | 
|  |  | 
|  | /* ISDB-T Support here */ | 
|  | case DTV_ISDBT_PARTIAL_RECEPTION: | 
|  | c->isdbt_partial_reception = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_SOUND_BROADCASTING: | 
|  | c->isdbt_sb_mode = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_SB_SUBCHANNEL_ID: | 
|  | c->isdbt_sb_subchannel = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_SB_SEGMENT_IDX: | 
|  | c->isdbt_sb_segment_idx = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_SB_SEGMENT_COUNT: | 
|  | c->isdbt_sb_segment_count = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYER_ENABLED: | 
|  | c->isdbt_layer_enabled = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_FEC: | 
|  | c->layer[0].fec = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_MODULATION: | 
|  | c->layer[0].modulation = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_SEGMENT_COUNT: | 
|  | c->layer[0].segment_count = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: | 
|  | c->layer[0].interleaving = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_FEC: | 
|  | c->layer[1].fec = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_MODULATION: | 
|  | c->layer[1].modulation = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_SEGMENT_COUNT: | 
|  | c->layer[1].segment_count = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: | 
|  | c->layer[1].interleaving = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_FEC: | 
|  | c->layer[2].fec = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_MODULATION: | 
|  | c->layer[2].modulation = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_SEGMENT_COUNT: | 
|  | c->layer[2].segment_count = tvp->u.data; | 
|  | break; | 
|  | case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: | 
|  | c->layer[2].interleaving = tvp->u.data; | 
|  | break; | 
|  |  | 
|  | /* Multistream support */ | 
|  | case DTV_STREAM_ID: | 
|  | case DTV_DVBT2_PLP_ID_LEGACY: | 
|  | c->stream_id = tvp->u.data; | 
|  | break; | 
|  |  | 
|  | /* ATSC-MH */ | 
|  | case DTV_ATSCMH_PARADE_ID: | 
|  | fe->dtv_property_cache.atscmh_parade_id = tvp->u.data; | 
|  | break; | 
|  | case DTV_ATSCMH_RS_FRAME_ENSEMBLE: | 
|  | fe->dtv_property_cache.atscmh_rs_frame_ensemble = tvp->u.data; | 
|  | break; | 
|  |  | 
|  | case DTV_LNA: | 
|  | c->lna = tvp->u.data; | 
|  | if (fe->ops.set_lna) | 
|  | r = fe->ops.set_lna(fe); | 
|  | if (r < 0) | 
|  | c->lna = LNA_AUTO; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_ioctl(struct file *file, | 
|  | unsigned int cmd, void *parg) | 
|  | { | 
|  | struct dvb_device *dvbdev = file->private_data; | 
|  | struct dvb_frontend *fe = dvbdev->priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | int err = -EOPNOTSUPP; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s: (%d)\n", __func__, _IOC_NR(cmd)); | 
|  | if (down_interruptible(&fepriv->sem)) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | if (fe->exit != DVB_FE_NO_EXIT) { | 
|  | up(&fepriv->sem); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if ((file->f_flags & O_ACCMODE) == O_RDONLY && | 
|  | (_IOC_DIR(cmd) != _IOC_READ || cmd == FE_GET_EVENT || | 
|  | cmd == FE_DISEQC_RECV_SLAVE_REPLY)) { | 
|  | up(&fepriv->sem); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if ((cmd == FE_SET_PROPERTY) || (cmd == FE_GET_PROPERTY)) | 
|  | err = dvb_frontend_ioctl_properties(file, cmd, parg); | 
|  | else { | 
|  | c->state = DTV_UNDEFINED; | 
|  | err = dvb_frontend_ioctl_legacy(file, cmd, parg); | 
|  | } | 
|  |  | 
|  | up(&fepriv->sem); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_ioctl_properties(struct file *file, | 
|  | unsigned int cmd, void *parg) | 
|  | { | 
|  | struct dvb_device *dvbdev = file->private_data; | 
|  | struct dvb_frontend *fe = dvbdev->priv; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | int err = 0; | 
|  |  | 
|  | struct dtv_properties *tvps = parg; | 
|  | struct dtv_property *tvp = NULL; | 
|  | int i; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if (cmd == FE_SET_PROPERTY) { | 
|  | dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); | 
|  | dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); | 
|  |  | 
|  | /* Put an arbitrary limit on the number of messages that can | 
|  | * be sent at once */ | 
|  | if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) | 
|  | return -EINVAL; | 
|  |  | 
|  | tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL); | 
|  | if (!tvp) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (copy_from_user(tvp, (void __user *)tvps->props, | 
|  | tvps->num * sizeof(struct dtv_property))) { | 
|  | err = -EFAULT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < tvps->num; i++) { | 
|  | err = dtv_property_process_set(fe, tvp + i, file); | 
|  | if (err < 0) | 
|  | goto out; | 
|  | (tvp + i)->result = err; | 
|  | } | 
|  |  | 
|  | if (c->state == DTV_TUNE) | 
|  | dev_dbg(fe->dvb->device, "%s: Property cache is full, tuning\n", __func__); | 
|  |  | 
|  | } else if (cmd == FE_GET_PROPERTY) { | 
|  | dev_dbg(fe->dvb->device, "%s: properties.num = %d\n", __func__, tvps->num); | 
|  | dev_dbg(fe->dvb->device, "%s: properties.props = %p\n", __func__, tvps->props); | 
|  |  | 
|  | /* Put an arbitrary limit on the number of messages that can | 
|  | * be sent at once */ | 
|  | if ((tvps->num == 0) || (tvps->num > DTV_IOCTL_MAX_MSGS)) | 
|  | return -EINVAL; | 
|  |  | 
|  | tvp = kmalloc(tvps->num * sizeof(struct dtv_property), GFP_KERNEL); | 
|  | if (!tvp) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (copy_from_user(tvp, (void __user *)tvps->props, | 
|  | tvps->num * sizeof(struct dtv_property))) { | 
|  | err = -EFAULT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fills the cache out struct with the cache contents, plus | 
|  | * the data retrieved from get_frontend, if the frontend | 
|  | * is not idle. Otherwise, returns the cached content | 
|  | */ | 
|  | if (fepriv->state != FESTATE_IDLE) { | 
|  | err = dtv_get_frontend(fe, NULL); | 
|  | if (err < 0) | 
|  | goto out; | 
|  | } | 
|  | for (i = 0; i < tvps->num; i++) { | 
|  | err = dtv_property_process_get(fe, c, tvp + i, file); | 
|  | if (err < 0) | 
|  | goto out; | 
|  | (tvp + i)->result = err; | 
|  | } | 
|  |  | 
|  | if (copy_to_user((void __user *)tvps->props, tvp, | 
|  | tvps->num * sizeof(struct dtv_property))) { | 
|  | err = -EFAULT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | } else | 
|  | err = -EOPNOTSUPP; | 
|  |  | 
|  | out: | 
|  | kfree(tvp); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int dtv_set_frontend(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | struct dvb_frontend_tune_settings fetunesettings; | 
|  | u32 rolloff = 0; | 
|  |  | 
|  | if (dvb_frontend_check_parameters(fe) < 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Initialize output parameters to match the values given by | 
|  | * the user. FE_SET_FRONTEND triggers an initial frontend event | 
|  | * with status = 0, which copies output parameters to userspace. | 
|  | */ | 
|  | dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); | 
|  |  | 
|  | /* | 
|  | * Be sure that the bandwidth will be filled for all | 
|  | * non-satellite systems, as tuners need to know what | 
|  | * low pass/Nyquist half filter should be applied, in | 
|  | * order to avoid inter-channel noise. | 
|  | * | 
|  | * ISDB-T and DVB-T/T2 already sets bandwidth. | 
|  | * ATSC and DVB-C don't set, so, the core should fill it. | 
|  | * | 
|  | * On DVB-C Annex A and C, the bandwidth is a function of | 
|  | * the roll-off and symbol rate. Annex B defines different | 
|  | * roll-off factors depending on the modulation. Fortunately, | 
|  | * Annex B is only used with 6MHz, so there's no need to | 
|  | * calculate it. | 
|  | * | 
|  | * While not officially supported, a side effect of handling it at | 
|  | * the cache level is that a program could retrieve the bandwidth | 
|  | * via DTV_BANDWIDTH_HZ, which may be useful for test programs. | 
|  | */ | 
|  | switch (c->delivery_system) { | 
|  | case SYS_ATSC: | 
|  | case SYS_DVBC_ANNEX_B: | 
|  | c->bandwidth_hz = 6000000; | 
|  | break; | 
|  | case SYS_DVBC_ANNEX_A: | 
|  | rolloff = 115; | 
|  | break; | 
|  | case SYS_DVBC_ANNEX_C: | 
|  | rolloff = 113; | 
|  | break; | 
|  | case SYS_DVBS: | 
|  | case SYS_TURBO: | 
|  | case SYS_ISDBS: | 
|  | rolloff = 135; | 
|  | break; | 
|  | case SYS_DVBS2: | 
|  | switch (c->rolloff) { | 
|  | case ROLLOFF_20: | 
|  | rolloff = 120; | 
|  | break; | 
|  | case ROLLOFF_25: | 
|  | rolloff = 125; | 
|  | break; | 
|  | default: | 
|  | case ROLLOFF_35: | 
|  | rolloff = 135; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | if (rolloff) | 
|  | c->bandwidth_hz = (c->symbol_rate * rolloff) / 100; | 
|  |  | 
|  | /* force auto frequency inversion if requested */ | 
|  | if (dvb_force_auto_inversion) | 
|  | c->inversion = INVERSION_AUTO; | 
|  |  | 
|  | /* | 
|  | * without hierarchical coding code_rate_LP is irrelevant, | 
|  | * so we tolerate the otherwise invalid FEC_NONE setting | 
|  | */ | 
|  | if (c->hierarchy == HIERARCHY_NONE && c->code_rate_LP == FEC_NONE) | 
|  | c->code_rate_LP = FEC_AUTO; | 
|  |  | 
|  | /* get frontend-specific tuning settings */ | 
|  | memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings)); | 
|  | if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe, &fetunesettings) == 0)) { | 
|  | fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) / 1000; | 
|  | fepriv->max_drift = fetunesettings.max_drift; | 
|  | fepriv->step_size = fetunesettings.step_size; | 
|  | } else { | 
|  | /* default values */ | 
|  | switch (c->delivery_system) { | 
|  | case SYS_DVBS: | 
|  | case SYS_DVBS2: | 
|  | case SYS_ISDBS: | 
|  | case SYS_TURBO: | 
|  | case SYS_DVBC_ANNEX_A: | 
|  | case SYS_DVBC_ANNEX_C: | 
|  | fepriv->min_delay = HZ / 20; | 
|  | fepriv->step_size = c->symbol_rate / 16000; | 
|  | fepriv->max_drift = c->symbol_rate / 2000; | 
|  | break; | 
|  | case SYS_DVBT: | 
|  | case SYS_DVBT2: | 
|  | case SYS_ISDBT: | 
|  | case SYS_DTMB: | 
|  | fepriv->min_delay = HZ / 20; | 
|  | fepriv->step_size = fe->ops.info.frequency_stepsize * 2; | 
|  | fepriv->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1; | 
|  | break; | 
|  | default: | 
|  | /* | 
|  | * FIXME: This sounds wrong! if freqency_stepsize is | 
|  | * defined by the frontend, why not use it??? | 
|  | */ | 
|  | fepriv->min_delay = HZ / 20; | 
|  | fepriv->step_size = 0; /* no zigzag */ | 
|  | fepriv->max_drift = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (dvb_override_tune_delay > 0) | 
|  | fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000; | 
|  |  | 
|  | fepriv->state = FESTATE_RETUNE; | 
|  |  | 
|  | /* Request the search algorithm to search */ | 
|  | fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; | 
|  |  | 
|  | dvb_frontend_clear_events(fe); | 
|  | dvb_frontend_add_event(fe, 0); | 
|  | dvb_frontend_wakeup(fe); | 
|  | fepriv->status = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int dvb_frontend_ioctl_legacy(struct file *file, | 
|  | unsigned int cmd, void *parg) | 
|  | { | 
|  | struct dvb_device *dvbdev = file->private_data; | 
|  | struct dvb_frontend *fe = dvbdev->priv; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | int err = -EOPNOTSUPP; | 
|  |  | 
|  | switch (cmd) { | 
|  | case FE_GET_INFO: { | 
|  | struct dvb_frontend_info* info = parg; | 
|  |  | 
|  | memcpy(info, &fe->ops.info, sizeof(struct dvb_frontend_info)); | 
|  | dvb_frontend_get_frequency_limits(fe, &info->frequency_min, &info->frequency_max); | 
|  |  | 
|  | /* | 
|  | * Associate the 4 delivery systems supported by DVBv3 | 
|  | * API with their DVBv5 counterpart. For the other standards, | 
|  | * use the closest type, assuming that it would hopefully | 
|  | * work with a DVBv3 application. | 
|  | * It should be noticed that, on multi-frontend devices with | 
|  | * different types (terrestrial and cable, for example), | 
|  | * a pure DVBv3 application won't be able to use all delivery | 
|  | * systems. Yet, changing the DVBv5 cache to the other delivery | 
|  | * system should be enough for making it work. | 
|  | */ | 
|  | switch (dvbv3_type(c->delivery_system)) { | 
|  | case DVBV3_QPSK: | 
|  | info->type = FE_QPSK; | 
|  | break; | 
|  | case DVBV3_ATSC: | 
|  | info->type = FE_ATSC; | 
|  | break; | 
|  | case DVBV3_QAM: | 
|  | info->type = FE_QAM; | 
|  | break; | 
|  | case DVBV3_OFDM: | 
|  | info->type = FE_OFDM; | 
|  | break; | 
|  | default: | 
|  | dev_err(fe->dvb->device, | 
|  | "%s: doesn't know how to handle a DVBv3 call to delivery system %i\n", | 
|  | __func__, c->delivery_system); | 
|  | fe->ops.info.type = FE_OFDM; | 
|  | } | 
|  | dev_dbg(fe->dvb->device, "%s: current delivery system on cache: %d, V3 type: %d\n", | 
|  | __func__, c->delivery_system, fe->ops.info.type); | 
|  |  | 
|  | /* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't | 
|  | * do it, it is done for it. */ | 
|  | info->caps |= FE_CAN_INVERSION_AUTO; | 
|  | err = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | case FE_READ_STATUS: { | 
|  | fe_status_t* status = parg; | 
|  |  | 
|  | /* if retune was requested but hasn't occurred yet, prevent | 
|  | * that user get signal state from previous tuning */ | 
|  | if (fepriv->state == FESTATE_RETUNE || | 
|  | fepriv->state == FESTATE_ERROR) { | 
|  | err=0; | 
|  | *status = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (fe->ops.read_status) | 
|  | err = fe->ops.read_status(fe, status); | 
|  | break; | 
|  | } | 
|  |  | 
|  | case FE_READ_BER: | 
|  | if (fe->ops.read_ber) { | 
|  | if (fepriv->thread) | 
|  | err = fe->ops.read_ber(fe, (__u32 *) parg); | 
|  | else | 
|  | err = -EAGAIN; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_READ_SIGNAL_STRENGTH: | 
|  | if (fe->ops.read_signal_strength) { | 
|  | if (fepriv->thread) | 
|  | err = fe->ops.read_signal_strength(fe, (__u16 *) parg); | 
|  | else | 
|  | err = -EAGAIN; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_READ_SNR: | 
|  | if (fe->ops.read_snr) { | 
|  | if (fepriv->thread) | 
|  | err = fe->ops.read_snr(fe, (__u16 *) parg); | 
|  | else | 
|  | err = -EAGAIN; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_READ_UNCORRECTED_BLOCKS: | 
|  | if (fe->ops.read_ucblocks) { | 
|  | if (fepriv->thread) | 
|  | err = fe->ops.read_ucblocks(fe, (__u32 *) parg); | 
|  | else | 
|  | err = -EAGAIN; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_DISEQC_RESET_OVERLOAD: | 
|  | if (fe->ops.diseqc_reset_overload) { | 
|  | err = fe->ops.diseqc_reset_overload(fe); | 
|  | fepriv->state = FESTATE_DISEQC; | 
|  | fepriv->status = 0; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_DISEQC_SEND_MASTER_CMD: | 
|  | if (fe->ops.diseqc_send_master_cmd) { | 
|  | err = fe->ops.diseqc_send_master_cmd(fe, (struct dvb_diseqc_master_cmd*) parg); | 
|  | fepriv->state = FESTATE_DISEQC; | 
|  | fepriv->status = 0; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_DISEQC_SEND_BURST: | 
|  | if (fe->ops.diseqc_send_burst) { | 
|  | err = fe->ops.diseqc_send_burst(fe, (fe_sec_mini_cmd_t) parg); | 
|  | fepriv->state = FESTATE_DISEQC; | 
|  | fepriv->status = 0; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_SET_TONE: | 
|  | if (fe->ops.set_tone) { | 
|  | err = fe->ops.set_tone(fe, (fe_sec_tone_mode_t) parg); | 
|  | fepriv->tone = (fe_sec_tone_mode_t) parg; | 
|  | fepriv->state = FESTATE_DISEQC; | 
|  | fepriv->status = 0; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_SET_VOLTAGE: | 
|  | if (fe->ops.set_voltage) { | 
|  | err = fe->ops.set_voltage(fe, (fe_sec_voltage_t) parg); | 
|  | fepriv->voltage = (fe_sec_voltage_t) parg; | 
|  | fepriv->state = FESTATE_DISEQC; | 
|  | fepriv->status = 0; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_DISHNETWORK_SEND_LEGACY_CMD: | 
|  | if (fe->ops.dishnetwork_send_legacy_command) { | 
|  | err = fe->ops.dishnetwork_send_legacy_command(fe, (unsigned long) parg); | 
|  | fepriv->state = FESTATE_DISEQC; | 
|  | fepriv->status = 0; | 
|  | } else if (fe->ops.set_voltage) { | 
|  | /* | 
|  | * NOTE: This is a fallback condition.  Some frontends | 
|  | * (stv0299 for instance) take longer than 8msec to | 
|  | * respond to a set_voltage command.  Those switches | 
|  | * need custom routines to switch properly.  For all | 
|  | * other frontends, the following should work ok. | 
|  | * Dish network legacy switches (as used by Dish500) | 
|  | * are controlled by sending 9-bit command words | 
|  | * spaced 8msec apart. | 
|  | * the actual command word is switch/port dependent | 
|  | * so it is up to the userspace application to send | 
|  | * the right command. | 
|  | * The command must always start with a '0' after | 
|  | * initialization, so parg is 8 bits and does not | 
|  | * include the initialization or start bit | 
|  | */ | 
|  | unsigned long swcmd = ((unsigned long) parg) << 1; | 
|  | struct timeval nexttime; | 
|  | struct timeval tv[10]; | 
|  | int i; | 
|  | u8 last = 1; | 
|  | if (dvb_frontend_debug) | 
|  | printk("%s switch command: 0x%04lx\n", __func__, swcmd); | 
|  | do_gettimeofday(&nexttime); | 
|  | if (dvb_frontend_debug) | 
|  | tv[0] = nexttime; | 
|  | /* before sending a command, initialize by sending | 
|  | * a 32ms 18V to the switch | 
|  | */ | 
|  | fe->ops.set_voltage(fe, SEC_VOLTAGE_18); | 
|  | dvb_frontend_sleep_until(&nexttime, 32000); | 
|  |  | 
|  | for (i = 0; i < 9; i++) { | 
|  | if (dvb_frontend_debug) | 
|  | do_gettimeofday(&tv[i + 1]); | 
|  | if ((swcmd & 0x01) != last) { | 
|  | /* set voltage to (last ? 13V : 18V) */ | 
|  | fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18); | 
|  | last = (last) ? 0 : 1; | 
|  | } | 
|  | swcmd = swcmd >> 1; | 
|  | if (i != 8) | 
|  | dvb_frontend_sleep_until(&nexttime, 8000); | 
|  | } | 
|  | if (dvb_frontend_debug) { | 
|  | printk("%s(%d): switch delay (should be 32k followed by all 8k\n", | 
|  | __func__, fe->dvb->num); | 
|  | for (i = 1; i < 10; i++) | 
|  | printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); | 
|  | } | 
|  | err = 0; | 
|  | fepriv->state = FESTATE_DISEQC; | 
|  | fepriv->status = 0; | 
|  | } | 
|  | break; | 
|  |  | 
|  | case FE_DISEQC_RECV_SLAVE_REPLY: | 
|  | if (fe->ops.diseqc_recv_slave_reply) | 
|  | err = fe->ops.diseqc_recv_slave_reply(fe, (struct dvb_diseqc_slave_reply*) parg); | 
|  | break; | 
|  |  | 
|  | case FE_ENABLE_HIGH_LNB_VOLTAGE: | 
|  | if (fe->ops.enable_high_lnb_voltage) | 
|  | err = fe->ops.enable_high_lnb_voltage(fe, (long) parg); | 
|  | break; | 
|  |  | 
|  | case FE_SET_FRONTEND: | 
|  | err = dvbv3_set_delivery_system(fe); | 
|  | if (err) | 
|  | break; | 
|  |  | 
|  | err = dtv_property_cache_sync(fe, c, parg); | 
|  | if (err) | 
|  | break; | 
|  | err = dtv_set_frontend(fe); | 
|  | break; | 
|  | case FE_GET_EVENT: | 
|  | err = dvb_frontend_get_event (fe, parg, file->f_flags); | 
|  | break; | 
|  |  | 
|  | case FE_GET_FRONTEND: | 
|  | err = dtv_get_frontend(fe, parg); | 
|  | break; | 
|  |  | 
|  | case FE_SET_FRONTEND_TUNE_MODE: | 
|  | fepriv->tune_mode_flags = (unsigned long) parg; | 
|  | err = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  |  | 
|  | static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struct *wait) | 
|  | { | 
|  | struct dvb_device *dvbdev = file->private_data; | 
|  | struct dvb_frontend *fe = dvbdev->priv; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  |  | 
|  | dev_dbg_ratelimited(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | poll_wait (file, &fepriv->events.wait_queue, wait); | 
|  |  | 
|  | if (fepriv->events.eventw != fepriv->events.eventr) | 
|  | return (POLLIN | POLLRDNORM | POLLPRI); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct dvb_device *dvbdev = file->private_data; | 
|  | struct dvb_frontend *fe = dvbdev->priv; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | struct dvb_adapter *adapter = fe->dvb; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  | if (fe->exit == DVB_FE_DEVICE_REMOVED) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (adapter->mfe_shared) { | 
|  | mutex_lock (&adapter->mfe_lock); | 
|  |  | 
|  | if (adapter->mfe_dvbdev == NULL) | 
|  | adapter->mfe_dvbdev = dvbdev; | 
|  |  | 
|  | else if (adapter->mfe_dvbdev != dvbdev) { | 
|  | struct dvb_device | 
|  | *mfedev = adapter->mfe_dvbdev; | 
|  | struct dvb_frontend | 
|  | *mfe = mfedev->priv; | 
|  | struct dvb_frontend_private | 
|  | *mfepriv = mfe->frontend_priv; | 
|  | int mferetry = (dvb_mfe_wait_time << 1); | 
|  |  | 
|  | mutex_unlock (&adapter->mfe_lock); | 
|  | while (mferetry-- && (mfedev->users != -1 || | 
|  | mfepriv->thread != NULL)) { | 
|  | if(msleep_interruptible(500)) { | 
|  | if(signal_pending(current)) | 
|  | return -EINTR; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_lock (&adapter->mfe_lock); | 
|  | if(adapter->mfe_dvbdev != dvbdev) { | 
|  | mfedev = adapter->mfe_dvbdev; | 
|  | mfe = mfedev->priv; | 
|  | mfepriv = mfe->frontend_priv; | 
|  | if (mfedev->users != -1 || | 
|  | mfepriv->thread != NULL) { | 
|  | mutex_unlock (&adapter->mfe_lock); | 
|  | return -EBUSY; | 
|  | } | 
|  | adapter->mfe_dvbdev = dvbdev; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { | 
|  | if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) | 
|  | goto err0; | 
|  |  | 
|  | /* If we took control of the bus, we need to force | 
|  | reinitialization.  This is because many ts_bus_ctrl() | 
|  | functions strobe the RESET pin on the demod, and if the | 
|  | frontend thread already exists then the dvb_init() routine | 
|  | won't get called (which is what usually does initial | 
|  | register configuration). */ | 
|  | fepriv->reinitialise = 1; | 
|  | } | 
|  |  | 
|  | if ((ret = dvb_generic_open (inode, file)) < 0) | 
|  | goto err1; | 
|  |  | 
|  | if ((file->f_flags & O_ACCMODE) != O_RDONLY) { | 
|  | /* normal tune mode when opened R/W */ | 
|  | fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT; | 
|  | fepriv->tone = -1; | 
|  | fepriv->voltage = -1; | 
|  |  | 
|  | ret = dvb_frontend_start (fe); | 
|  | if (ret) | 
|  | goto err2; | 
|  |  | 
|  | /*  empty event queue */ | 
|  | fepriv->events.eventr = fepriv->events.eventw = 0; | 
|  | } | 
|  |  | 
|  | if (adapter->mfe_shared) | 
|  | mutex_unlock (&adapter->mfe_lock); | 
|  | return ret; | 
|  |  | 
|  | err2: | 
|  | dvb_generic_release(inode, file); | 
|  | err1: | 
|  | if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) | 
|  | fe->ops.ts_bus_ctrl(fe, 0); | 
|  | err0: | 
|  | if (adapter->mfe_shared) | 
|  | mutex_unlock (&adapter->mfe_lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dvb_frontend_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct dvb_device *dvbdev = file->private_data; | 
|  | struct dvb_frontend *fe = dvbdev->priv; | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if ((file->f_flags & O_ACCMODE) != O_RDONLY) { | 
|  | fepriv->release_jiffies = jiffies; | 
|  | mb(); | 
|  | } | 
|  |  | 
|  | ret = dvb_generic_release (inode, file); | 
|  |  | 
|  | if (dvbdev->users == -1) { | 
|  | wake_up(&fepriv->wait_queue); | 
|  | if (fe->exit != DVB_FE_NO_EXIT) | 
|  | wake_up(&dvbdev->wait_queue); | 
|  | if (fe->ops.ts_bus_ctrl) | 
|  | fe->ops.ts_bus_ctrl(fe, 0); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct file_operations dvb_frontend_fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .unlocked_ioctl	= dvb_generic_ioctl, | 
|  | .poll		= dvb_frontend_poll, | 
|  | .open		= dvb_frontend_open, | 
|  | .release	= dvb_frontend_release, | 
|  | .llseek		= noop_llseek, | 
|  | }; | 
|  |  | 
|  | int dvb_frontend_suspend(struct dvb_frontend *fe) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, | 
|  | fe->id); | 
|  |  | 
|  | if (fe->ops.tuner_ops.suspend) | 
|  | ret = fe->ops.tuner_ops.suspend(fe); | 
|  | else if (fe->ops.tuner_ops.sleep) | 
|  | ret = fe->ops.tuner_ops.sleep(fe); | 
|  |  | 
|  | if (fe->ops.sleep) | 
|  | ret = fe->ops.sleep(fe); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_frontend_suspend); | 
|  |  | 
|  | int dvb_frontend_resume(struct dvb_frontend *fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | int ret = 0; | 
|  |  | 
|  | dev_dbg(fe->dvb->device, "%s: adap=%d fe=%d\n", __func__, fe->dvb->num, | 
|  | fe->id); | 
|  |  | 
|  | fe->exit = DVB_FE_DEVICE_RESUME; | 
|  | if (fe->ops.init) | 
|  | ret = fe->ops.init(fe); | 
|  |  | 
|  | if (fe->ops.tuner_ops.resume) | 
|  | ret = fe->ops.tuner_ops.resume(fe); | 
|  | else if (fe->ops.tuner_ops.init) | 
|  | ret = fe->ops.tuner_ops.init(fe); | 
|  |  | 
|  | fe->exit = DVB_FE_NO_EXIT; | 
|  | fepriv->state = FESTATE_RETUNE; | 
|  | dvb_frontend_wakeup(fe); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_frontend_resume); | 
|  |  | 
|  | int dvb_register_frontend(struct dvb_adapter* dvb, | 
|  | struct dvb_frontend* fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv; | 
|  | static const struct dvb_device dvbdev_template = { | 
|  | .users = ~0, | 
|  | .writers = 1, | 
|  | .readers = (~0)-1, | 
|  | .fops = &dvb_frontend_fops, | 
|  | .kernel_ioctl = dvb_frontend_ioctl | 
|  | }; | 
|  |  | 
|  | dev_dbg(dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | if (mutex_lock_interruptible(&frontend_mutex)) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | fe->frontend_priv = kzalloc(sizeof(struct dvb_frontend_private), GFP_KERNEL); | 
|  | if (fe->frontend_priv == NULL) { | 
|  | mutex_unlock(&frontend_mutex); | 
|  | return -ENOMEM; | 
|  | } | 
|  | fepriv = fe->frontend_priv; | 
|  |  | 
|  | sema_init(&fepriv->sem, 1); | 
|  | init_waitqueue_head (&fepriv->wait_queue); | 
|  | init_waitqueue_head (&fepriv->events.wait_queue); | 
|  | mutex_init(&fepriv->events.mtx); | 
|  | fe->dvb = dvb; | 
|  | fepriv->inversion = INVERSION_OFF; | 
|  |  | 
|  | dev_info(fe->dvb->device, | 
|  | "DVB: registering adapter %i frontend %i (%s)...\n", | 
|  | fe->dvb->num, fe->id, fe->ops.info.name); | 
|  |  | 
|  | dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template, | 
|  | fe, DVB_DEVICE_FRONTEND); | 
|  |  | 
|  | /* | 
|  | * Initialize the cache to the proper values according with the | 
|  | * first supported delivery system (ops->delsys[0]) | 
|  | */ | 
|  |  | 
|  | fe->dtv_property_cache.delivery_system = fe->ops.delsys[0]; | 
|  | dvb_frontend_clear_cache(fe); | 
|  |  | 
|  | mutex_unlock(&frontend_mutex); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_register_frontend); | 
|  |  | 
|  | int dvb_unregister_frontend(struct dvb_frontend* fe) | 
|  | { | 
|  | struct dvb_frontend_private *fepriv = fe->frontend_priv; | 
|  | dev_dbg(fe->dvb->device, "%s:\n", __func__); | 
|  |  | 
|  | mutex_lock(&frontend_mutex); | 
|  | dvb_frontend_stop (fe); | 
|  | mutex_unlock(&frontend_mutex); | 
|  |  | 
|  | if (fepriv->dvbdev->users < -1) | 
|  | wait_event(fepriv->dvbdev->wait_queue, | 
|  | fepriv->dvbdev->users==-1); | 
|  |  | 
|  | mutex_lock(&frontend_mutex); | 
|  | dvb_unregister_device (fepriv->dvbdev); | 
|  |  | 
|  | /* fe is invalid now */ | 
|  | kfree(fepriv); | 
|  | mutex_unlock(&frontend_mutex); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(dvb_unregister_frontend); | 
|  |  | 
|  | #ifdef CONFIG_MEDIA_ATTACH | 
|  | void dvb_frontend_detach(struct dvb_frontend* fe) | 
|  | { | 
|  | void *ptr; | 
|  |  | 
|  | if (fe->ops.release_sec) { | 
|  | fe->ops.release_sec(fe); | 
|  | dvb_detach(fe->ops.release_sec); | 
|  | } | 
|  | if (fe->ops.tuner_ops.release) { | 
|  | fe->ops.tuner_ops.release(fe); | 
|  | dvb_detach(fe->ops.tuner_ops.release); | 
|  | } | 
|  | if (fe->ops.analog_ops.release) { | 
|  | fe->ops.analog_ops.release(fe); | 
|  | dvb_detach(fe->ops.analog_ops.release); | 
|  | } | 
|  | ptr = (void*)fe->ops.release; | 
|  | if (ptr) { | 
|  | fe->ops.release(fe); | 
|  | dvb_detach(ptr); | 
|  | } | 
|  | } | 
|  | #else | 
|  | void dvb_frontend_detach(struct dvb_frontend* fe) | 
|  | { | 
|  | if (fe->ops.release_sec) | 
|  | fe->ops.release_sec(fe); | 
|  | if (fe->ops.tuner_ops.release) | 
|  | fe->ops.tuner_ops.release(fe); | 
|  | if (fe->ops.analog_ops.release) | 
|  | fe->ops.analog_ops.release(fe); | 
|  | if (fe->ops.release) | 
|  | fe->ops.release(fe); | 
|  | } | 
|  | #endif | 
|  | EXPORT_SYMBOL(dvb_frontend_detach); |