| /* | 
 |  * QLogic iSCSI HBA Driver | 
 |  * Copyright (c) 2011 QLogic Corporation | 
 |  * | 
 |  * See LICENSE.qla4xxx for copyright and licensing details. | 
 |  */ | 
 |  | 
 | #include "ql4_def.h" | 
 | #include "ql4_glbl.h" | 
 | #include "ql4_bsg.h" | 
 |  | 
 | static int | 
 | qla4xxx_read_flash(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	uint32_t offset = 0; | 
 | 	uint32_t length = 0; | 
 | 	dma_addr_t flash_dma; | 
 | 	uint8_t *flash = NULL; | 
 | 	int rval = -EINVAL; | 
 |  | 
 | 	bsg_reply->reply_payload_rcv_len = 0; | 
 |  | 
 | 	if (unlikely(pci_channel_offline(ha->pdev))) | 
 | 		goto leave; | 
 |  | 
 | 	if (ql4xxx_reset_active(ha)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	if (ha->flash_state != QLFLASH_WAITING) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: another flash operation " | 
 | 			   "active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	ha->flash_state = QLFLASH_READING; | 
 | 	offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | 
 | 	length = bsg_job->reply_payload.payload_len; | 
 |  | 
 | 	flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, | 
 | 				   GFP_KERNEL); | 
 | 	if (!flash) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " | 
 | 			   "data\n", __func__); | 
 | 		rval = -ENOMEM; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	rval = qla4xxx_get_flash(ha, flash_dma, offset, length); | 
 | 	if (rval) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: get flash failed\n", __func__); | 
 | 		bsg_reply->result = DID_ERROR << 16; | 
 | 		rval = -EIO; | 
 | 	} else { | 
 | 		bsg_reply->reply_payload_rcv_len = | 
 | 			sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | 
 | 					    bsg_job->reply_payload.sg_cnt, | 
 | 					    flash, length); | 
 | 		bsg_reply->result = DID_OK << 16; | 
 | 	} | 
 |  | 
 | 	bsg_job_done(bsg_job, bsg_reply->result, | 
 | 		     bsg_reply->reply_payload_rcv_len); | 
 | 	dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); | 
 | leave: | 
 | 	ha->flash_state = QLFLASH_WAITING; | 
 | 	return rval; | 
 | } | 
 |  | 
 | static int | 
 | qla4xxx_update_flash(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	uint32_t length = 0; | 
 | 	uint32_t offset = 0; | 
 | 	uint32_t options = 0; | 
 | 	dma_addr_t flash_dma; | 
 | 	uint8_t *flash = NULL; | 
 | 	int rval = -EINVAL; | 
 |  | 
 | 	bsg_reply->reply_payload_rcv_len = 0; | 
 |  | 
 | 	if (unlikely(pci_channel_offline(ha->pdev))) | 
 | 		goto leave; | 
 |  | 
 | 	if (ql4xxx_reset_active(ha)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	if (ha->flash_state != QLFLASH_WAITING) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: another flash operation " | 
 | 			   "active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	ha->flash_state = QLFLASH_WRITING; | 
 | 	length = bsg_job->request_payload.payload_len; | 
 | 	offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | 
 | 	options = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; | 
 |  | 
 | 	flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, | 
 | 				   GFP_KERNEL); | 
 | 	if (!flash) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " | 
 | 			   "data\n", __func__); | 
 | 		rval = -ENOMEM; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	sg_copy_to_buffer(bsg_job->request_payload.sg_list, | 
 | 			  bsg_job->request_payload.sg_cnt, flash, length); | 
 |  | 
 | 	rval = qla4xxx_set_flash(ha, flash_dma, offset, length, options); | 
 | 	if (rval) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: set flash failed\n", __func__); | 
 | 		bsg_reply->result = DID_ERROR << 16; | 
 | 		rval = -EIO; | 
 | 	} else | 
 | 		bsg_reply->result = DID_OK << 16; | 
 |  | 
 | 	bsg_job_done(bsg_job, bsg_reply->result, | 
 | 		     bsg_reply->reply_payload_rcv_len); | 
 | 	dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); | 
 | leave: | 
 | 	ha->flash_state = QLFLASH_WAITING; | 
 | 	return rval; | 
 | } | 
 |  | 
 | static int | 
 | qla4xxx_get_acb_state(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	uint32_t status[MBOX_REG_COUNT]; | 
 | 	uint32_t acb_idx; | 
 | 	uint32_t ip_idx; | 
 | 	int rval = -EINVAL; | 
 |  | 
 | 	bsg_reply->reply_payload_rcv_len = 0; | 
 |  | 
 | 	if (unlikely(pci_channel_offline(ha->pdev))) | 
 | 		goto leave; | 
 |  | 
 | 	/* Only 4022 and above adapters are supported */ | 
 | 	if (is_qla4010(ha)) | 
 | 		goto leave; | 
 |  | 
 | 	if (ql4xxx_reset_active(ha)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	if (bsg_job->reply_payload.payload_len < sizeof(status)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: invalid payload len %d\n", | 
 | 			   __func__, bsg_job->reply_payload.payload_len); | 
 | 		rval = -EINVAL; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	acb_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | 
 | 	ip_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; | 
 |  | 
 | 	rval = qla4xxx_get_ip_state(ha, acb_idx, ip_idx, status); | 
 | 	if (rval) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: get ip state failed\n", | 
 | 			   __func__); | 
 | 		bsg_reply->result = DID_ERROR << 16; | 
 | 		rval = -EIO; | 
 | 	} else { | 
 | 		bsg_reply->reply_payload_rcv_len = | 
 | 			sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | 
 | 					    bsg_job->reply_payload.sg_cnt, | 
 | 					    status, sizeof(status)); | 
 | 		bsg_reply->result = DID_OK << 16; | 
 | 	} | 
 |  | 
 | 	bsg_job_done(bsg_job, bsg_reply->result, | 
 | 		     bsg_reply->reply_payload_rcv_len); | 
 | leave: | 
 | 	return rval; | 
 | } | 
 |  | 
 | static int | 
 | qla4xxx_read_nvram(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	uint32_t offset = 0; | 
 | 	uint32_t len = 0; | 
 | 	uint32_t total_len = 0; | 
 | 	dma_addr_t nvram_dma; | 
 | 	uint8_t *nvram = NULL; | 
 | 	int rval = -EINVAL; | 
 |  | 
 | 	bsg_reply->reply_payload_rcv_len = 0; | 
 |  | 
 | 	if (unlikely(pci_channel_offline(ha->pdev))) | 
 | 		goto leave; | 
 |  | 
 | 	/* Only 40xx adapters are supported */ | 
 | 	if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) | 
 | 		goto leave; | 
 |  | 
 | 	if (ql4xxx_reset_active(ha)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | 
 | 	len = bsg_job->reply_payload.payload_len; | 
 | 	total_len = offset + len; | 
 |  | 
 | 	/* total len should not be greater than max NVRAM size */ | 
 | 	if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || | 
 | 	    ((is_qla4022(ha) || is_qla4032(ha)) && | 
 | 	     total_len > QL40X2_NVRAM_SIZE)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" | 
 | 			   " nvram size, offset=%d len=%d\n", | 
 | 			   __func__, offset, len); | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, | 
 | 				   GFP_KERNEL); | 
 | 	if (!nvram) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for nvram " | 
 | 			   "data\n", __func__); | 
 | 		rval = -ENOMEM; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	rval = qla4xxx_get_nvram(ha, nvram_dma, offset, len); | 
 | 	if (rval) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: get nvram failed\n", __func__); | 
 | 		bsg_reply->result = DID_ERROR << 16; | 
 | 		rval = -EIO; | 
 | 	} else { | 
 | 		bsg_reply->reply_payload_rcv_len = | 
 | 			sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | 
 | 					    bsg_job->reply_payload.sg_cnt, | 
 | 					    nvram, len); | 
 | 		bsg_reply->result = DID_OK << 16; | 
 | 	} | 
 |  | 
 | 	bsg_job_done(bsg_job, bsg_reply->result, | 
 | 		     bsg_reply->reply_payload_rcv_len); | 
 | 	dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); | 
 | leave: | 
 | 	return rval; | 
 | } | 
 |  | 
 | static int | 
 | qla4xxx_update_nvram(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	uint32_t offset = 0; | 
 | 	uint32_t len = 0; | 
 | 	uint32_t total_len = 0; | 
 | 	dma_addr_t nvram_dma; | 
 | 	uint8_t *nvram = NULL; | 
 | 	int rval = -EINVAL; | 
 |  | 
 | 	bsg_reply->reply_payload_rcv_len = 0; | 
 |  | 
 | 	if (unlikely(pci_channel_offline(ha->pdev))) | 
 | 		goto leave; | 
 |  | 
 | 	if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) | 
 | 		goto leave; | 
 |  | 
 | 	if (ql4xxx_reset_active(ha)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | 
 | 	len = bsg_job->request_payload.payload_len; | 
 | 	total_len = offset + len; | 
 |  | 
 | 	/* total len should not be greater than max NVRAM size */ | 
 | 	if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || | 
 | 	    ((is_qla4022(ha) || is_qla4032(ha)) && | 
 | 	     total_len > QL40X2_NVRAM_SIZE)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" | 
 | 			   " nvram size, offset=%d len=%d\n", | 
 | 			   __func__, offset, len); | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, | 
 | 				   GFP_KERNEL); | 
 | 	if (!nvram) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " | 
 | 			   "data\n", __func__); | 
 | 		rval = -ENOMEM; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	sg_copy_to_buffer(bsg_job->request_payload.sg_list, | 
 | 			  bsg_job->request_payload.sg_cnt, nvram, len); | 
 |  | 
 | 	rval = qla4xxx_set_nvram(ha, nvram_dma, offset, len); | 
 | 	if (rval) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); | 
 | 		bsg_reply->result = DID_ERROR << 16; | 
 | 		rval = -EIO; | 
 | 	} else | 
 | 		bsg_reply->result = DID_OK << 16; | 
 |  | 
 | 	bsg_job_done(bsg_job, bsg_reply->result, | 
 | 		     bsg_reply->reply_payload_rcv_len); | 
 | 	dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); | 
 | leave: | 
 | 	return rval; | 
 | } | 
 |  | 
 | static int | 
 | qla4xxx_restore_defaults(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	uint32_t region = 0; | 
 | 	uint32_t field0 = 0; | 
 | 	uint32_t field1 = 0; | 
 | 	int rval = -EINVAL; | 
 |  | 
 | 	bsg_reply->reply_payload_rcv_len = 0; | 
 |  | 
 | 	if (unlikely(pci_channel_offline(ha->pdev))) | 
 | 		goto leave; | 
 |  | 
 | 	if (is_qla4010(ha)) | 
 | 		goto leave; | 
 |  | 
 | 	if (ql4xxx_reset_active(ha)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	region = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | 
 | 	field0 = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; | 
 | 	field1 = bsg_req->rqst_data.h_vendor.vendor_cmd[3]; | 
 |  | 
 | 	rval = qla4xxx_restore_factory_defaults(ha, region, field0, field1); | 
 | 	if (rval) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); | 
 | 		bsg_reply->result = DID_ERROR << 16; | 
 | 		rval = -EIO; | 
 | 	} else | 
 | 		bsg_reply->result = DID_OK << 16; | 
 |  | 
 | 	bsg_job_done(bsg_job, bsg_reply->result, | 
 | 		     bsg_reply->reply_payload_rcv_len); | 
 | leave: | 
 | 	return rval; | 
 | } | 
 |  | 
 | static int | 
 | qla4xxx_bsg_get_acb(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	uint32_t acb_type = 0; | 
 | 	uint32_t len = 0; | 
 | 	dma_addr_t acb_dma; | 
 | 	uint8_t *acb = NULL; | 
 | 	int rval = -EINVAL; | 
 |  | 
 | 	bsg_reply->reply_payload_rcv_len = 0; | 
 |  | 
 | 	if (unlikely(pci_channel_offline(ha->pdev))) | 
 | 		goto leave; | 
 |  | 
 | 	/* Only 4022 and above adapters are supported */ | 
 | 	if (is_qla4010(ha)) | 
 | 		goto leave; | 
 |  | 
 | 	if (ql4xxx_reset_active(ha)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); | 
 | 		rval = -EBUSY; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	acb_type = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; | 
 | 	len = bsg_job->reply_payload.payload_len; | 
 | 	if (len < sizeof(struct addr_ctrl_blk)) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: invalid acb len %d\n", | 
 | 			   __func__, len); | 
 | 		rval = -EINVAL; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	acb = dma_alloc_coherent(&ha->pdev->dev, len, &acb_dma, GFP_KERNEL); | 
 | 	if (!acb) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for acb " | 
 | 			   "data\n", __func__); | 
 | 		rval = -ENOMEM; | 
 | 		goto leave; | 
 | 	} | 
 |  | 
 | 	rval = qla4xxx_get_acb(ha, acb_dma, acb_type, len); | 
 | 	if (rval) { | 
 | 		ql4_printk(KERN_ERR, ha, "%s: get acb failed\n", __func__); | 
 | 		bsg_reply->result = DID_ERROR << 16; | 
 | 		rval = -EIO; | 
 | 	} else { | 
 | 		bsg_reply->reply_payload_rcv_len = | 
 | 			sg_copy_from_buffer(bsg_job->reply_payload.sg_list, | 
 | 					    bsg_job->reply_payload.sg_cnt, | 
 | 					    acb, len); | 
 | 		bsg_reply->result = DID_OK << 16; | 
 | 	} | 
 |  | 
 | 	bsg_job_done(bsg_job, bsg_reply->result, | 
 | 		     bsg_reply->reply_payload_rcv_len); | 
 | 	dma_free_coherent(&ha->pdev->dev, len, acb, acb_dma); | 
 | leave: | 
 | 	return rval; | 
 | } | 
 |  | 
 | /** | 
 |  * qla4xxx_process_vendor_specific - handle vendor specific bsg request | 
 |  * @job: iscsi_bsg_job to handle | 
 |  **/ | 
 | int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 |  | 
 | 	switch (bsg_req->rqst_data.h_vendor.vendor_cmd[0]) { | 
 | 	case QLISCSI_VND_READ_FLASH: | 
 | 		return qla4xxx_read_flash(bsg_job); | 
 |  | 
 | 	case QLISCSI_VND_UPDATE_FLASH: | 
 | 		return qla4xxx_update_flash(bsg_job); | 
 |  | 
 | 	case QLISCSI_VND_GET_ACB_STATE: | 
 | 		return qla4xxx_get_acb_state(bsg_job); | 
 |  | 
 | 	case QLISCSI_VND_READ_NVRAM: | 
 | 		return qla4xxx_read_nvram(bsg_job); | 
 |  | 
 | 	case QLISCSI_VND_UPDATE_NVRAM: | 
 | 		return qla4xxx_update_nvram(bsg_job); | 
 |  | 
 | 	case QLISCSI_VND_RESTORE_DEFAULTS: | 
 | 		return qla4xxx_restore_defaults(bsg_job); | 
 |  | 
 | 	case QLISCSI_VND_GET_ACB: | 
 | 		return qla4xxx_bsg_get_acb(bsg_job); | 
 |  | 
 | 	default: | 
 | 		ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: " | 
 | 			   "0x%x\n", __func__, bsg_req->msgcode); | 
 | 		bsg_reply->result = (DID_ERROR << 16); | 
 | 		bsg_reply->reply_payload_rcv_len = 0; | 
 | 		bsg_job_done(bsg_job, bsg_reply->result, | 
 | 			     bsg_reply->reply_payload_rcv_len); | 
 | 		return -ENOSYS; | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * qla4xxx_bsg_request - handle bsg request from ISCSI transport | 
 |  * @job: iscsi_bsg_job to handle | 
 |  */ | 
 | int qla4xxx_bsg_request(struct bsg_job *bsg_job) | 
 | { | 
 | 	struct iscsi_bsg_request *bsg_req = bsg_job->request; | 
 | 	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); | 
 | 	struct scsi_qla_host *ha = to_qla_host(host); | 
 |  | 
 | 	switch (bsg_req->msgcode) { | 
 | 	case ISCSI_BSG_HST_VENDOR: | 
 | 		return qla4xxx_process_vendor_specific(bsg_job); | 
 |  | 
 | 	default: | 
 | 		ql4_printk(KERN_ERR, ha, "%s: invalid BSG command: 0x%x\n", | 
 | 			   __func__, bsg_req->msgcode); | 
 | 	} | 
 |  | 
 | 	return -ENOSYS; | 
 | } |