| /* checksum.S: Sparc optimized checksum code. |
| * |
| * Copyright(C) 1995 Linus Torvalds |
| * Copyright(C) 1995 Miguel de Icaza |
| * Copyright(C) 1996 David S. Miller |
| * Copyright(C) 1997 Jakub Jelinek |
| * |
| * derived from: |
| * Linux/Alpha checksum c-code |
| * Linux/ix86 inline checksum assembly |
| * RFC1071 Computing the Internet Checksum (esp. Jacobsons m68k code) |
| * David Mosberger-Tang for optimized reference c-code |
| * BSD4.4 portable checksum routine |
| */ |
| |
| #include <asm/errno.h> |
| |
| #define CSUM_BIGCHUNK(buf, offset, sum, t0, t1, t2, t3, t4, t5) \ |
| ldd [buf + offset + 0x00], t0; \ |
| ldd [buf + offset + 0x08], t2; \ |
| addxcc t0, sum, sum; \ |
| addxcc t1, sum, sum; \ |
| ldd [buf + offset + 0x10], t4; \ |
| addxcc t2, sum, sum; \ |
| addxcc t3, sum, sum; \ |
| ldd [buf + offset + 0x18], t0; \ |
| addxcc t4, sum, sum; \ |
| addxcc t5, sum, sum; \ |
| addxcc t0, sum, sum; \ |
| addxcc t1, sum, sum; |
| |
| #define CSUM_LASTCHUNK(buf, offset, sum, t0, t1, t2, t3) \ |
| ldd [buf - offset - 0x08], t0; \ |
| ldd [buf - offset - 0x00], t2; \ |
| addxcc t0, sum, sum; \ |
| addxcc t1, sum, sum; \ |
| addxcc t2, sum, sum; \ |
| addxcc t3, sum, sum; |
| |
| /* Do end cruft out of band to get better cache patterns. */ |
| csum_partial_end_cruft: |
| be 1f ! caller asks %o1 & 0x8 |
| andcc %o1, 4, %g0 ! nope, check for word remaining |
| ldd [%o0], %g2 ! load two |
| addcc %g2, %o2, %o2 ! add first word to sum |
| addxcc %g3, %o2, %o2 ! add second word as well |
| add %o0, 8, %o0 ! advance buf ptr |
| addx %g0, %o2, %o2 ! add in final carry |
| andcc %o1, 4, %g0 ! check again for word remaining |
| 1: be 1f ! nope, skip this code |
| andcc %o1, 3, %o1 ! check for trailing bytes |
| ld [%o0], %g2 ! load it |
| addcc %g2, %o2, %o2 ! add to sum |
| add %o0, 4, %o0 ! advance buf ptr |
| addx %g0, %o2, %o2 ! add in final carry |
| andcc %o1, 3, %g0 ! check again for trailing bytes |
| 1: be 1f ! no trailing bytes, return |
| addcc %o1, -1, %g0 ! only one byte remains? |
| bne 2f ! at least two bytes more |
| subcc %o1, 2, %o1 ! only two bytes more? |
| b 4f ! only one byte remains |
| or %g0, %g0, %o4 ! clear fake hword value |
| 2: lduh [%o0], %o4 ! get hword |
| be 6f ! jmp if only hword remains |
| add %o0, 2, %o0 ! advance buf ptr either way |
| sll %o4, 16, %o4 ! create upper hword |
| 4: ldub [%o0], %o5 ! get final byte |
| sll %o5, 8, %o5 ! put into place |
| or %o5, %o4, %o4 ! coalese with hword (if any) |
| 6: addcc %o4, %o2, %o2 ! add to sum |
| 1: retl ! get outta here |
| addx %g0, %o2, %o0 ! add final carry into retval |
| |
| /* Also do alignment out of band to get better cache patterns. */ |
| csum_partial_fix_alignment: |
| cmp %o1, 6 |
| bl cpte - 0x4 |
| andcc %o0, 0x2, %g0 |
| be 1f |
| andcc %o0, 0x4, %g0 |
| lduh [%o0 + 0x00], %g2 |
| sub %o1, 2, %o1 |
| add %o0, 2, %o0 |
| sll %g2, 16, %g2 |
| addcc %g2, %o2, %o2 |
| srl %o2, 16, %g3 |
| addx %g0, %g3, %g2 |
| sll %o2, 16, %o2 |
| sll %g2, 16, %g3 |
| srl %o2, 16, %o2 |
| andcc %o0, 0x4, %g0 |
| or %g3, %o2, %o2 |
| 1: be cpa |
| andcc %o1, 0xffffff80, %o3 |
| ld [%o0 + 0x00], %g2 |
| sub %o1, 4, %o1 |
| addcc %g2, %o2, %o2 |
| add %o0, 4, %o0 |
| addx %g0, %o2, %o2 |
| b cpa |
| andcc %o1, 0xffffff80, %o3 |
| |
| /* The common case is to get called with a nicely aligned |
| * buffer of size 0x20. Follow the code path for that case. |
| */ |
| .globl csum_partial |
| csum_partial: /* %o0=buf, %o1=len, %o2=sum */ |
| andcc %o0, 0x7, %g0 ! alignment problems? |
| bne csum_partial_fix_alignment ! yep, handle it |
| sethi %hi(cpte - 8), %g7 ! prepare table jmp ptr |
| andcc %o1, 0xffffff80, %o3 ! num loop iterations |
| cpa: be 3f ! none to do |
| andcc %o1, 0x70, %g1 ! clears carry flag too |
| 5: CSUM_BIGCHUNK(%o0, 0x00, %o2, %o4, %o5, %g2, %g3, %g4, %g5) |
| CSUM_BIGCHUNK(%o0, 0x20, %o2, %o4, %o5, %g2, %g3, %g4, %g5) |
| CSUM_BIGCHUNK(%o0, 0x40, %o2, %o4, %o5, %g2, %g3, %g4, %g5) |
| CSUM_BIGCHUNK(%o0, 0x60, %o2, %o4, %o5, %g2, %g3, %g4, %g5) |
| addx %g0, %o2, %o2 ! sink in final carry |
| subcc %o3, 128, %o3 ! detract from loop iters |
| bne 5b ! more to do |
| add %o0, 128, %o0 ! advance buf ptr |
| andcc %o1, 0x70, %g1 ! clears carry flag too |
| 3: be cpte ! nope |
| andcc %o1, 0xf, %g0 ! anything left at all? |
| srl %g1, 1, %o4 ! compute offset |
| sub %g7, %g1, %g7 ! adjust jmp ptr |
| sub %g7, %o4, %g7 ! final jmp ptr adjust |
| jmp %g7 + %lo(cpte - 8) ! enter the table |
| add %o0, %g1, %o0 ! advance buf ptr |
| cptbl: CSUM_LASTCHUNK(%o0, 0x68, %o2, %g2, %g3, %g4, %g5) |
| CSUM_LASTCHUNK(%o0, 0x58, %o2, %g2, %g3, %g4, %g5) |
| CSUM_LASTCHUNK(%o0, 0x48, %o2, %g2, %g3, %g4, %g5) |
| CSUM_LASTCHUNK(%o0, 0x38, %o2, %g2, %g3, %g4, %g5) |
| CSUM_LASTCHUNK(%o0, 0x28, %o2, %g2, %g3, %g4, %g5) |
| CSUM_LASTCHUNK(%o0, 0x18, %o2, %g2, %g3, %g4, %g5) |
| CSUM_LASTCHUNK(%o0, 0x08, %o2, %g2, %g3, %g4, %g5) |
| addx %g0, %o2, %o2 ! fetch final carry |
| andcc %o1, 0xf, %g0 ! anything left at all? |
| cpte: bne csum_partial_end_cruft ! yep, handle it |
| andcc %o1, 8, %g0 ! check how much |
| cpout: retl ! get outta here |
| mov %o2, %o0 ! return computed csum |
| |
| .globl __csum_partial_copy_start, __csum_partial_copy_end |
| __csum_partial_copy_start: |
| |
| /* Work around cpp -rob */ |
| #define ALLOC #alloc |
| #define EXECINSTR #execinstr |
| #define EX(x,y,a,b) \ |
| 98: x,y; \ |
| .section .fixup,ALLOC,EXECINSTR; \ |
| .align 4; \ |
| 99: ba 30f; \ |
| a, b, %o3; \ |
| .section __ex_table,ALLOC; \ |
| .align 4; \ |
| .word 98b, 99b; \ |
| .text; \ |
| .align 4 |
| |
| #define EX2(x,y) \ |
| 98: x,y; \ |
| .section __ex_table,ALLOC; \ |
| .align 4; \ |
| .word 98b, 30f; \ |
| .text; \ |
| .align 4 |
| |
| #define EX3(x,y) \ |
| 98: x,y; \ |
| .section __ex_table,ALLOC; \ |
| .align 4; \ |
| .word 98b, 96f; \ |
| .text; \ |
| .align 4 |
| |
| #define EXT(start,end,handler) \ |
| .section __ex_table,ALLOC; \ |
| .align 4; \ |
| .word start, 0, end, handler; \ |
| .text; \ |
| .align 4 |
| |
| /* This aligned version executes typically in 8.5 superscalar cycles, this |
| * is the best I can do. I say 8.5 because the final add will pair with |
| * the next ldd in the main unrolled loop. Thus the pipe is always full. |
| * If you change these macros (including order of instructions), |
| * please check the fixup code below as well. |
| */ |
| #define CSUMCOPY_BIGCHUNK_ALIGNED(src, dst, sum, off, t0, t1, t2, t3, t4, t5, t6, t7) \ |
| ldd [src + off + 0x00], t0; \ |
| ldd [src + off + 0x08], t2; \ |
| addxcc t0, sum, sum; \ |
| ldd [src + off + 0x10], t4; \ |
| addxcc t1, sum, sum; \ |
| ldd [src + off + 0x18], t6; \ |
| addxcc t2, sum, sum; \ |
| std t0, [dst + off + 0x00]; \ |
| addxcc t3, sum, sum; \ |
| std t2, [dst + off + 0x08]; \ |
| addxcc t4, sum, sum; \ |
| std t4, [dst + off + 0x10]; \ |
| addxcc t5, sum, sum; \ |
| std t6, [dst + off + 0x18]; \ |
| addxcc t6, sum, sum; \ |
| addxcc t7, sum, sum; |
| |
| /* 12 superscalar cycles seems to be the limit for this case, |
| * because of this we thus do all the ldd's together to get |
| * Viking MXCC into streaming mode. Ho hum... |
| */ |
| #define CSUMCOPY_BIGCHUNK(src, dst, sum, off, t0, t1, t2, t3, t4, t5, t6, t7) \ |
| ldd [src + off + 0x00], t0; \ |
| ldd [src + off + 0x08], t2; \ |
| ldd [src + off + 0x10], t4; \ |
| ldd [src + off + 0x18], t6; \ |
| st t0, [dst + off + 0x00]; \ |
| addxcc t0, sum, sum; \ |
| st t1, [dst + off + 0x04]; \ |
| addxcc t1, sum, sum; \ |
| st t2, [dst + off + 0x08]; \ |
| addxcc t2, sum, sum; \ |
| st t3, [dst + off + 0x0c]; \ |
| addxcc t3, sum, sum; \ |
| st t4, [dst + off + 0x10]; \ |
| addxcc t4, sum, sum; \ |
| st t5, [dst + off + 0x14]; \ |
| addxcc t5, sum, sum; \ |
| st t6, [dst + off + 0x18]; \ |
| addxcc t6, sum, sum; \ |
| st t7, [dst + off + 0x1c]; \ |
| addxcc t7, sum, sum; |
| |
| /* Yuck, 6 superscalar cycles... */ |
| #define CSUMCOPY_LASTCHUNK(src, dst, sum, off, t0, t1, t2, t3) \ |
| ldd [src - off - 0x08], t0; \ |
| ldd [src - off - 0x00], t2; \ |
| addxcc t0, sum, sum; \ |
| st t0, [dst - off - 0x08]; \ |
| addxcc t1, sum, sum; \ |
| st t1, [dst - off - 0x04]; \ |
| addxcc t2, sum, sum; \ |
| st t2, [dst - off - 0x00]; \ |
| addxcc t3, sum, sum; \ |
| st t3, [dst - off + 0x04]; |
| |
| /* Handle the end cruft code out of band for better cache patterns. */ |
| cc_end_cruft: |
| be 1f |
| andcc %o3, 4, %g0 |
| EX(ldd [%o0 + 0x00], %g2, and %o3, 0xf) |
| add %o1, 8, %o1 |
| addcc %g2, %g7, %g7 |
| add %o0, 8, %o0 |
| addxcc %g3, %g7, %g7 |
| EX2(st %g2, [%o1 - 0x08]) |
| addx %g0, %g7, %g7 |
| andcc %o3, 4, %g0 |
| EX2(st %g3, [%o1 - 0x04]) |
| 1: be 1f |
| andcc %o3, 3, %o3 |
| EX(ld [%o0 + 0x00], %g2, add %o3, 4) |
| add %o1, 4, %o1 |
| addcc %g2, %g7, %g7 |
| EX2(st %g2, [%o1 - 0x04]) |
| addx %g0, %g7, %g7 |
| andcc %o3, 3, %g0 |
| add %o0, 4, %o0 |
| 1: be 1f |
| addcc %o3, -1, %g0 |
| bne 2f |
| subcc %o3, 2, %o3 |
| b 4f |
| or %g0, %g0, %o4 |
| 2: EX(lduh [%o0 + 0x00], %o4, add %o3, 2) |
| add %o0, 2, %o0 |
| EX2(sth %o4, [%o1 + 0x00]) |
| be 6f |
| add %o1, 2, %o1 |
| sll %o4, 16, %o4 |
| 4: EX(ldub [%o0 + 0x00], %o5, add %g0, 1) |
| EX2(stb %o5, [%o1 + 0x00]) |
| sll %o5, 8, %o5 |
| or %o5, %o4, %o4 |
| 6: addcc %o4, %g7, %g7 |
| 1: retl |
| addx %g0, %g7, %o0 |
| |
| /* Also, handle the alignment code out of band. */ |
| cc_dword_align: |
| cmp %g1, 16 |
| bge 1f |
| srl %g1, 1, %o3 |
| 2: cmp %o3, 0 |
| be,a ccte |
| andcc %g1, 0xf, %o3 |
| andcc %o3, %o0, %g0 ! Check %o0 only (%o1 has the same last 2 bits) |
| be,a 2b |
| srl %o3, 1, %o3 |
| 1: andcc %o0, 0x1, %g0 |
| bne ccslow |
| andcc %o0, 0x2, %g0 |
| be 1f |
| andcc %o0, 0x4, %g0 |
| EX(lduh [%o0 + 0x00], %g4, add %g1, 0) |
| sub %g1, 2, %g1 |
| EX2(sth %g4, [%o1 + 0x00]) |
| add %o0, 2, %o0 |
| sll %g4, 16, %g4 |
| addcc %g4, %g7, %g7 |
| add %o1, 2, %o1 |
| srl %g7, 16, %g3 |
| addx %g0, %g3, %g4 |
| sll %g7, 16, %g7 |
| sll %g4, 16, %g3 |
| srl %g7, 16, %g7 |
| andcc %o0, 0x4, %g0 |
| or %g3, %g7, %g7 |
| 1: be 3f |
| andcc %g1, 0xffffff80, %g0 |
| EX(ld [%o0 + 0x00], %g4, add %g1, 0) |
| sub %g1, 4, %g1 |
| EX2(st %g4, [%o1 + 0x00]) |
| add %o0, 4, %o0 |
| addcc %g4, %g7, %g7 |
| add %o1, 4, %o1 |
| addx %g0, %g7, %g7 |
| b 3f |
| andcc %g1, 0xffffff80, %g0 |
| |
| /* Sun, you just can't beat me, you just can't. Stop trying, |
| * give up. I'm serious, I am going to kick the living shit |
| * out of you, game over, lights out. |
| */ |
| .align 8 |
| .globl __csum_partial_copy_sparc_generic |
| __csum_partial_copy_sparc_generic: |
| /* %o0=src, %o1=dest, %g1=len, %g7=sum */ |
| xor %o0, %o1, %o4 ! get changing bits |
| andcc %o4, 3, %g0 ! check for mismatched alignment |
| bne ccslow ! better this than unaligned/fixups |
| andcc %o0, 7, %g0 ! need to align things? |
| bne cc_dword_align ! yes, we check for short lengths there |
| andcc %g1, 0xffffff80, %g0 ! can we use unrolled loop? |
| 3: be 3f ! nope, less than one loop remains |
| andcc %o1, 4, %g0 ! dest aligned on 4 or 8 byte boundary? |
| be ccdbl + 4 ! 8 byte aligned, kick ass |
| 5: CSUMCOPY_BIGCHUNK(%o0,%o1,%g7,0x00,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| CSUMCOPY_BIGCHUNK(%o0,%o1,%g7,0x20,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| CSUMCOPY_BIGCHUNK(%o0,%o1,%g7,0x40,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| CSUMCOPY_BIGCHUNK(%o0,%o1,%g7,0x60,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| 10: EXT(5b, 10b, 20f) ! note for exception handling |
| sub %g1, 128, %g1 ! detract from length |
| addx %g0, %g7, %g7 ! add in last carry bit |
| andcc %g1, 0xffffff80, %g0 ! more to csum? |
| add %o0, 128, %o0 ! advance src ptr |
| bne 5b ! we did not go negative, continue looping |
| add %o1, 128, %o1 ! advance dest ptr |
| 3: andcc %g1, 0x70, %o2 ! can use table? |
| ccmerge:be ccte ! nope, go and check for end cruft |
| andcc %g1, 0xf, %o3 ! get low bits of length (clears carry btw) |
| srl %o2, 1, %o4 ! begin negative offset computation |
| sethi %hi(12f), %o5 ! set up table ptr end |
| add %o0, %o2, %o0 ! advance src ptr |
| sub %o5, %o4, %o5 ! continue table calculation |
| sll %o2, 1, %g2 ! constant multiplies are fun... |
| sub %o5, %g2, %o5 ! some more adjustments |
| jmp %o5 + %lo(12f) ! jump into it, duff style, wheee... |
| add %o1, %o2, %o1 ! advance dest ptr (carry is clear btw) |
| cctbl: CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x68,%g2,%g3,%g4,%g5) |
| CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x58,%g2,%g3,%g4,%g5) |
| CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x48,%g2,%g3,%g4,%g5) |
| CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x38,%g2,%g3,%g4,%g5) |
| CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x28,%g2,%g3,%g4,%g5) |
| CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x18,%g2,%g3,%g4,%g5) |
| CSUMCOPY_LASTCHUNK(%o0,%o1,%g7,0x08,%g2,%g3,%g4,%g5) |
| 12: EXT(cctbl, 12b, 22f) ! note for exception table handling |
| addx %g0, %g7, %g7 |
| andcc %o3, 0xf, %g0 ! check for low bits set |
| ccte: bne cc_end_cruft ! something left, handle it out of band |
| andcc %o3, 8, %g0 ! begin checks for that code |
| retl ! return |
| mov %g7, %o0 ! give em the computed checksum |
| ccdbl: CSUMCOPY_BIGCHUNK_ALIGNED(%o0,%o1,%g7,0x00,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| CSUMCOPY_BIGCHUNK_ALIGNED(%o0,%o1,%g7,0x20,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| CSUMCOPY_BIGCHUNK_ALIGNED(%o0,%o1,%g7,0x40,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| CSUMCOPY_BIGCHUNK_ALIGNED(%o0,%o1,%g7,0x60,%o4,%o5,%g2,%g3,%g4,%g5,%o2,%o3) |
| 11: EXT(ccdbl, 11b, 21f) ! note for exception table handling |
| sub %g1, 128, %g1 ! detract from length |
| addx %g0, %g7, %g7 ! add in last carry bit |
| andcc %g1, 0xffffff80, %g0 ! more to csum? |
| add %o0, 128, %o0 ! advance src ptr |
| bne ccdbl ! we did not go negative, continue looping |
| add %o1, 128, %o1 ! advance dest ptr |
| b ccmerge ! finish it off, above |
| andcc %g1, 0x70, %o2 ! can use table? (clears carry btw) |
| |
| ccslow: cmp %g1, 0 |
| mov 0, %g5 |
| bleu 4f |
| andcc %o0, 1, %o5 |
| be,a 1f |
| srl %g1, 1, %g4 |
| sub %g1, 1, %g1 |
| EX(ldub [%o0], %g5, add %g1, 1) |
| add %o0, 1, %o0 |
| EX2(stb %g5, [%o1]) |
| srl %g1, 1, %g4 |
| add %o1, 1, %o1 |
| 1: cmp %g4, 0 |
| be,a 3f |
| andcc %g1, 1, %g0 |
| andcc %o0, 2, %g0 |
| be,a 1f |
| srl %g4, 1, %g4 |
| EX(lduh [%o0], %o4, add %g1, 0) |
| sub %g1, 2, %g1 |
| srl %o4, 8, %g2 |
| sub %g4, 1, %g4 |
| EX2(stb %g2, [%o1]) |
| add %o4, %g5, %g5 |
| EX2(stb %o4, [%o1 + 1]) |
| add %o0, 2, %o0 |
| srl %g4, 1, %g4 |
| add %o1, 2, %o1 |
| 1: cmp %g4, 0 |
| be,a 2f |
| andcc %g1, 2, %g0 |
| EX3(ld [%o0], %o4) |
| 5: srl %o4, 24, %g2 |
| srl %o4, 16, %g3 |
| EX2(stb %g2, [%o1]) |
| srl %o4, 8, %g2 |
| EX2(stb %g3, [%o1 + 1]) |
| add %o0, 4, %o0 |
| EX2(stb %g2, [%o1 + 2]) |
| addcc %o4, %g5, %g5 |
| EX2(stb %o4, [%o1 + 3]) |
| addx %g5, %g0, %g5 ! I am now to lazy to optimize this (question it |
| add %o1, 4, %o1 ! is worthy). Maybe some day - with the sll/srl |
| subcc %g4, 1, %g4 ! tricks |
| bne,a 5b |
| EX3(ld [%o0], %o4) |
| sll %g5, 16, %g2 |
| srl %g5, 16, %g5 |
| srl %g2, 16, %g2 |
| andcc %g1, 2, %g0 |
| add %g2, %g5, %g5 |
| 2: be,a 3f |
| andcc %g1, 1, %g0 |
| EX(lduh [%o0], %o4, and %g1, 3) |
| andcc %g1, 1, %g0 |
| srl %o4, 8, %g2 |
| add %o0, 2, %o0 |
| EX2(stb %g2, [%o1]) |
| add %g5, %o4, %g5 |
| EX2(stb %o4, [%o1 + 1]) |
| add %o1, 2, %o1 |
| 3: be,a 1f |
| sll %g5, 16, %o4 |
| EX(ldub [%o0], %g2, add %g0, 1) |
| sll %g2, 8, %o4 |
| EX2(stb %g2, [%o1]) |
| add %g5, %o4, %g5 |
| sll %g5, 16, %o4 |
| 1: addcc %o4, %g5, %g5 |
| srl %g5, 16, %o4 |
| addx %g0, %o4, %g5 |
| orcc %o5, %g0, %g0 |
| be 4f |
| srl %g5, 8, %o4 |
| and %g5, 0xff, %g2 |
| and %o4, 0xff, %o4 |
| sll %g2, 8, %g2 |
| or %g2, %o4, %g5 |
| 4: addcc %g7, %g5, %g7 |
| retl |
| addx %g0, %g7, %o0 |
| __csum_partial_copy_end: |
| |
| /* We do these strange calculations for the csum_*_from_user case only, ie. |
| * we only bother with faults on loads... */ |
| |
| /* o2 = ((g2%20)&3)*8 |
| * o3 = g1 - (g2/20)*32 - o2 */ |
| 20: |
| cmp %g2, 20 |
| blu,a 1f |
| and %g2, 3, %o2 |
| sub %g1, 32, %g1 |
| b 20b |
| sub %g2, 20, %g2 |
| 1: |
| sll %o2, 3, %o2 |
| b 31f |
| sub %g1, %o2, %o3 |
| |
| /* o2 = (!(g2 & 15) ? 0 : (((g2 & 15) + 1) & ~1)*8) |
| * o3 = g1 - (g2/16)*32 - o2 */ |
| 21: |
| andcc %g2, 15, %o3 |
| srl %g2, 4, %g2 |
| be,a 1f |
| clr %o2 |
| add %o3, 1, %o3 |
| and %o3, 14, %o3 |
| sll %o3, 3, %o2 |
| 1: |
| sll %g2, 5, %g2 |
| sub %g1, %g2, %o3 |
| b 31f |
| sub %o3, %o2, %o3 |
| |
| /* o0 += (g2/10)*16 - 0x70 |
| * 01 += (g2/10)*16 - 0x70 |
| * o2 = (g2 % 10) ? 8 : 0 |
| * o3 += 0x70 - (g2/10)*16 - o2 */ |
| 22: |
| cmp %g2, 10 |
| blu,a 1f |
| sub %o0, 0x70, %o0 |
| add %o0, 16, %o0 |
| add %o1, 16, %o1 |
| sub %o3, 16, %o3 |
| b 22b |
| sub %g2, 10, %g2 |
| 1: |
| sub %o1, 0x70, %o1 |
| add %o3, 0x70, %o3 |
| clr %o2 |
| tst %g2 |
| bne,a 1f |
| mov 8, %o2 |
| 1: |
| b 31f |
| sub %o3, %o2, %o3 |
| 96: |
| and %g1, 3, %g1 |
| sll %g4, 2, %g4 |
| add %g1, %g4, %o3 |
| 30: |
| /* %o1 is dst |
| * %o3 is # bytes to zero out |
| * %o4 is faulting address |
| * %o5 is %pc where fault occurred */ |
| clr %o2 |
| 31: |
| /* %o0 is src |
| * %o1 is dst |
| * %o2 is # of bytes to copy from src to dst |
| * %o3 is # bytes to zero out |
| * %o4 is faulting address |
| * %o5 is %pc where fault occurred */ |
| save %sp, -104, %sp |
| mov %i5, %o0 |
| mov %i7, %o1 |
| mov %i4, %o2 |
| call lookup_fault |
| mov %g7, %i4 |
| cmp %o0, 2 |
| bne 1f |
| add %g0, -EFAULT, %i5 |
| tst %i2 |
| be 2f |
| mov %i0, %o1 |
| mov %i1, %o0 |
| 5: |
| call memcpy |
| mov %i2, %o2 |
| tst %o0 |
| bne,a 2f |
| add %i3, %i2, %i3 |
| add %i1, %i2, %i1 |
| 2: |
| mov %i1, %o0 |
| 6: |
| call __bzero |
| mov %i3, %o1 |
| 1: |
| ld [%sp + 168], %o2 ! struct_ptr of parent |
| st %i5, [%o2] |
| ret |
| restore |
| |
| .section __ex_table,#alloc |
| .align 4 |
| .word 5b,2 |
| .word 6b,2 |
