| /* | 
 |  * Support for the sensor part which is integrated (I think) into the | 
 |  * st6422 stv06xx alike bridge, as its integrated there are no i2c writes | 
 |  * but instead direct bridge writes. | 
 |  * | 
 |  * Copyright (c) 2009 Hans de Goede <hdegoede@redhat.com> | 
 |  * | 
 |  * Strongly based on qc-usb-messenger, which is: | 
 |  * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher | 
 |  *		      Mark Cave-Ayland, Carlo E Prelz, Dick Streefland | 
 |  * Copyright (c) 2002, 2003 Tuukka Toivonen | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include "stv06xx_st6422.h" | 
 |  | 
 | static struct v4l2_pix_format st6422_mode[] = { | 
 | 	/* Note we actually get 124 lines of data, of which we skip the 4st | 
 | 	   4 as they are garbage */ | 
 | 	{ | 
 | 		162, | 
 | 		120, | 
 | 		V4L2_PIX_FMT_SGRBG8, | 
 | 		V4L2_FIELD_NONE, | 
 | 		.sizeimage = 162 * 120, | 
 | 		.bytesperline = 162, | 
 | 		.colorspace = V4L2_COLORSPACE_SRGB, | 
 | 		.priv = 1 | 
 | 	}, | 
 | 	/* Note we actually get 248 lines of data, of which we skip the 4st | 
 | 	   4 as they are garbage, and we tell the app it only gets the | 
 | 	   first 240 of the 244 lines it actually gets, so that it ignores | 
 | 	   the last 4. */ | 
 | 	{ | 
 | 		324, | 
 | 		240, | 
 | 		V4L2_PIX_FMT_SGRBG8, | 
 | 		V4L2_FIELD_NONE, | 
 | 		.sizeimage = 324 * 244, | 
 | 		.bytesperline = 324, | 
 | 		.colorspace = V4L2_COLORSPACE_SRGB, | 
 | 		.priv = 0 | 
 | 	}, | 
 | }; | 
 |  | 
 | /* V4L2 controls supported by the driver */ | 
 | static int setbrightness(struct sd *sd, s32 val); | 
 | static int setcontrast(struct sd *sd, s32 val); | 
 | static int setgain(struct sd *sd, u8 gain); | 
 | static int setexposure(struct sd *sd, s16 expo); | 
 |  | 
 | static int st6422_s_ctrl(struct v4l2_ctrl *ctrl) | 
 | { | 
 | 	struct gspca_dev *gspca_dev = | 
 | 		container_of(ctrl->handler, struct gspca_dev, ctrl_handler); | 
 | 	struct sd *sd = (struct sd *)gspca_dev; | 
 | 	int err = -EINVAL; | 
 |  | 
 | 	switch (ctrl->id) { | 
 | 	case V4L2_CID_BRIGHTNESS: | 
 | 		err = setbrightness(sd, ctrl->val); | 
 | 		break; | 
 | 	case V4L2_CID_CONTRAST: | 
 | 		err = setcontrast(sd, ctrl->val); | 
 | 		break; | 
 | 	case V4L2_CID_GAIN: | 
 | 		err = setgain(sd, ctrl->val); | 
 | 		break; | 
 | 	case V4L2_CID_EXPOSURE: | 
 | 		err = setexposure(sd, ctrl->val); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* commit settings */ | 
 | 	if (err >= 0) | 
 | 		err = stv06xx_write_bridge(sd, 0x143f, 0x01); | 
 | 	sd->gspca_dev.usb_err = err; | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct v4l2_ctrl_ops st6422_ctrl_ops = { | 
 | 	.s_ctrl = st6422_s_ctrl, | 
 | }; | 
 |  | 
 | static int st6422_init_controls(struct sd *sd) | 
 | { | 
 | 	struct v4l2_ctrl_handler *hdl = &sd->gspca_dev.ctrl_handler; | 
 |  | 
 | 	v4l2_ctrl_handler_init(hdl, 4); | 
 | 	v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, | 
 | 			V4L2_CID_BRIGHTNESS, 0, 31, 1, 3); | 
 | 	v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, | 
 | 			V4L2_CID_CONTRAST, 0, 15, 1, 11); | 
 | 	v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, | 
 | 			V4L2_CID_EXPOSURE, 0, 1023, 1, 256); | 
 | 	v4l2_ctrl_new_std(hdl, &st6422_ctrl_ops, | 
 | 			V4L2_CID_GAIN, 0, 255, 1, 64); | 
 |  | 
 | 	return hdl->error; | 
 | } | 
 |  | 
 | static int st6422_probe(struct sd *sd) | 
 | { | 
 | 	if (sd->bridge != BRIDGE_ST6422) | 
 | 		return -ENODEV; | 
 |  | 
 | 	pr_info("st6422 sensor detected\n"); | 
 |  | 
 | 	sd->gspca_dev.cam.cam_mode = st6422_mode; | 
 | 	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int st6422_init(struct sd *sd) | 
 | { | 
 | 	int err = 0, i; | 
 |  | 
 | 	const u16 st6422_bridge_init[][2] = { | 
 | 		{ STV_ISO_ENABLE, 0x00 }, /* disable capture */ | 
 | 		{ 0x1436, 0x00 }, | 
 | 		{ 0x1432, 0x03 },	/* 0x00-0x1F brightness */ | 
 | 		{ 0x143a, 0xf9 },	/* 0x00-0x0F contrast */ | 
 | 		{ 0x0509, 0x38 },	/* R */ | 
 | 		{ 0x050a, 0x38 },	/* G */ | 
 | 		{ 0x050b, 0x38 },	/* B */ | 
 | 		{ 0x050c, 0x2a }, | 
 | 		{ 0x050d, 0x01 }, | 
 |  | 
 |  | 
 | 		{ 0x1431, 0x00 },	/* 0x00-0x07 ??? */ | 
 | 		{ 0x1433, 0x34 },	/* 160x120, 0x00-0x01 night filter */ | 
 | 		{ 0x1438, 0x18 },	/* 640x480 */ | 
 | /* 18 bayes */ | 
 | /* 10 compressed? */ | 
 |  | 
 | 		{ 0x1439, 0x00 }, | 
 | /* anti-noise?  0xa2 gives a perfect image */ | 
 |  | 
 | 		{ 0x143b, 0x05 }, | 
 | 		{ 0x143c, 0x00 },	/* 0x00-0x01 - ??? */ | 
 |  | 
 |  | 
 | /* shutter time 0x0000-0x03FF */ | 
 | /* low value  give good picures on moving objects (but requires much light) */ | 
 | /* high value gives good picures in darkness (but tends to be overexposed) */ | 
 | 		{ 0x143e, 0x01 }, | 
 | 		{ 0x143d, 0x00 }, | 
 |  | 
 | 		{ 0x1442, 0xe2 }, | 
 | /* write: 1x1x xxxx */ | 
 | /* read:  1x1x xxxx */ | 
 | /*        bit 5 == button pressed and hold if 0 */ | 
 | /* write 0xe2,0xea */ | 
 |  | 
 | /* 0x144a */ | 
 | /* 0x00 init */ | 
 | /* bit 7 == button has been pressed, but not handled */ | 
 |  | 
 | /* interrupt */ | 
 | /* if(urb->iso_frame_desc[i].status == 0x80) { */ | 
 | /* if(urb->iso_frame_desc[i].status == 0x88) { */ | 
 |  | 
 | 		{ 0x1500, 0xd0 }, | 
 | 		{ 0x1500, 0xd0 }, | 
 | 		{ 0x1500, 0x50 },	/* 0x00 - 0xFF  0x80 == compr ? */ | 
 |  | 
 | 		{ 0x1501, 0xaf }, | 
 | /* high val-> light area gets darker */ | 
 | /* low val -> light area gets lighter */ | 
 | 		{ 0x1502, 0xc2 }, | 
 | /* high val-> light area gets darker */ | 
 | /* low val -> light area gets lighter */ | 
 | 		{ 0x1503, 0x45 }, | 
 | /* high val-> light area gets darker */ | 
 | /* low val -> light area gets lighter */ | 
 | 		{ 0x1505, 0x02 }, | 
 | /* 2  : 324x248  80352 bytes */ | 
 | /* 7  : 248x162  40176 bytes */ | 
 | /* c+f: 162*124  20088 bytes */ | 
 |  | 
 | 		{ 0x150e, 0x8e }, | 
 | 		{ 0x150f, 0x37 }, | 
 | 		{ 0x15c0, 0x00 }, | 
 | 		{ 0x15c3, 0x08 },	/* 0x04/0x14 ... test pictures ??? */ | 
 |  | 
 |  | 
 | 		{ 0x143f, 0x01 },	/* commit settings */ | 
 |  | 
 | 	}; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(st6422_bridge_init) && !err; i++) { | 
 | 		err = stv06xx_write_bridge(sd, st6422_bridge_init[i][0], | 
 | 					       st6422_bridge_init[i][1]); | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int setbrightness(struct sd *sd, s32 val) | 
 | { | 
 | 	/* val goes from 0 -> 31 */ | 
 | 	return stv06xx_write_bridge(sd, 0x1432, val); | 
 | } | 
 |  | 
 | static int setcontrast(struct sd *sd, s32 val) | 
 | { | 
 | 	/* Val goes from 0 -> 15 */ | 
 | 	return stv06xx_write_bridge(sd, 0x143a, val | 0xf0); | 
 | } | 
 |  | 
 | static int setgain(struct sd *sd, u8 gain) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	/* Set red, green, blue, gain */ | 
 | 	err = stv06xx_write_bridge(sd, 0x0509, gain); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = stv06xx_write_bridge(sd, 0x050a, gain); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	err = stv06xx_write_bridge(sd, 0x050b, gain); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* 2 mystery writes */ | 
 | 	err = stv06xx_write_bridge(sd, 0x050c, 0x2a); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return stv06xx_write_bridge(sd, 0x050d, 0x01); | 
 | } | 
 |  | 
 | static int setexposure(struct sd *sd, s16 expo) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	err = stv06xx_write_bridge(sd, 0x143d, expo & 0xff); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	return stv06xx_write_bridge(sd, 0x143e, expo >> 8); | 
 | } | 
 |  | 
 | static int st6422_start(struct sd *sd) | 
 | { | 
 | 	int err; | 
 | 	struct cam *cam = &sd->gspca_dev.cam; | 
 |  | 
 | 	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv) | 
 | 		err = stv06xx_write_bridge(sd, 0x1505, 0x0f); | 
 | 	else | 
 | 		err = stv06xx_write_bridge(sd, 0x1505, 0x02); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	/* commit settings */ | 
 | 	err = stv06xx_write_bridge(sd, 0x143f, 0x01); | 
 | 	return (err < 0) ? err : 0; | 
 | } | 
 |  | 
 | static int st6422_stop(struct sd *sd) | 
 | { | 
 | 	struct gspca_dev *gspca_dev = (struct gspca_dev *)sd; | 
 |  | 
 | 	PDEBUG(D_STREAM, "Halting stream"); | 
 |  | 
 | 	return 0; | 
 | } |