|  | /* | 
|  | * Copyright (C) 2005-2006 Micronas USA Inc. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License (Version 2) as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/videodev2.h> | 
|  | #include <media/v4l2-device.h> | 
|  | #include <media/i2c/uda1342.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | static int write_reg(struct i2c_client *client, int reg, int value) | 
|  | { | 
|  | /* UDA1342 wants MSB first, but SMBus sends LSB first */ | 
|  | i2c_smbus_write_word_data(client, reg, swab16(value)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int uda1342_s_routing(struct v4l2_subdev *sd, | 
|  | u32 input, u32 output, u32 config) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(sd); | 
|  |  | 
|  | switch (input) { | 
|  | case UDA1342_IN1: | 
|  | write_reg(client, 0x00, 0x1241); /* select input 1 */ | 
|  | break; | 
|  | case UDA1342_IN2: | 
|  | write_reg(client, 0x00, 0x1441); /* select input 2 */ | 
|  | break; | 
|  | default: | 
|  | v4l2_err(sd, "input %d not supported\n", input); | 
|  | break; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct v4l2_subdev_audio_ops uda1342_audio_ops = { | 
|  | .s_routing = uda1342_s_routing, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_ops uda1342_ops = { | 
|  | .audio = &uda1342_audio_ops, | 
|  | }; | 
|  |  | 
|  | static int uda1342_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct i2c_adapter *adapter = client->adapter; | 
|  | struct v4l2_subdev *sd; | 
|  |  | 
|  | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) | 
|  | return -ENODEV; | 
|  |  | 
|  | dev_dbg(&client->dev, "initializing UDA1342 at address %d on %s\n", | 
|  | client->addr, adapter->name); | 
|  |  | 
|  | sd = devm_kzalloc(&client->dev, sizeof(*sd), GFP_KERNEL); | 
|  | if (sd == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | v4l2_i2c_subdev_init(sd, client, &uda1342_ops); | 
|  |  | 
|  | write_reg(client, 0x00, 0x8000); /* reset registers */ | 
|  | write_reg(client, 0x00, 0x1241); /* select input 1 */ | 
|  |  | 
|  | v4l_info(client, "chip found @ 0x%02x (%s)\n", | 
|  | client->addr << 1, client->adapter->name); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int uda1342_remove(struct i2c_client *client) | 
|  | { | 
|  | struct v4l2_subdev *sd = i2c_get_clientdata(client); | 
|  |  | 
|  | v4l2_device_unregister_subdev(sd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id uda1342_id[] = { | 
|  | { "uda1342", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, uda1342_id); | 
|  |  | 
|  | static struct i2c_driver uda1342_driver = { | 
|  | .driver = { | 
|  | .name	= "uda1342", | 
|  | }, | 
|  | .probe		= uda1342_probe, | 
|  | .remove		= uda1342_remove, | 
|  | .id_table	= uda1342_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(uda1342_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL v2"); |