|  | /* | 
|  | * ATAPI support. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/cdrom.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/ide.h> | 
|  | #include <linux/scatterlist.h> | 
|  | #include <linux/gfp.h> | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  |  | 
|  | #define DRV_NAME "ide-atapi" | 
|  | #define PFX DRV_NAME ": " | 
|  |  | 
|  | #ifdef DEBUG | 
|  | #define debug_log(fmt, args...) \ | 
|  | printk(KERN_INFO "ide: " fmt, ## args) | 
|  | #else | 
|  | #define debug_log(fmt, args...) do {} while (0) | 
|  | #endif | 
|  |  | 
|  | #define ATAPI_MIN_CDB_BYTES	12 | 
|  |  | 
|  | static inline int dev_is_idecd(ide_drive_t *drive) | 
|  | { | 
|  | return drive->media == ide_cdrom || drive->media == ide_optical; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether we can support a device, | 
|  | * based on the ATAPI IDENTIFY command results. | 
|  | */ | 
|  | int ide_check_atapi_device(ide_drive_t *drive, const char *s) | 
|  | { | 
|  | u16 *id = drive->id; | 
|  | u8 gcw[2], protocol, device_type, removable, drq_type, packet_size; | 
|  |  | 
|  | *((u16 *)&gcw) = id[ATA_ID_CONFIG]; | 
|  |  | 
|  | protocol    = (gcw[1] & 0xC0) >> 6; | 
|  | device_type =  gcw[1] & 0x1F; | 
|  | removable   = (gcw[0] & 0x80) >> 7; | 
|  | drq_type    = (gcw[0] & 0x60) >> 5; | 
|  | packet_size =  gcw[0] & 0x03; | 
|  |  | 
|  | #ifdef CONFIG_PPC | 
|  | /* kludge for Apple PowerBook internal zip */ | 
|  | if (drive->media == ide_floppy && device_type == 5 && | 
|  | !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") && | 
|  | strstr((char *)&id[ATA_ID_PROD], "ZIP")) | 
|  | device_type = 0; | 
|  | #endif | 
|  |  | 
|  | if (protocol != 2) | 
|  | printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n", | 
|  | s, drive->name, protocol); | 
|  | else if ((drive->media == ide_floppy && device_type != 0) || | 
|  | (drive->media == ide_tape && device_type != 1)) | 
|  | printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n", | 
|  | s, drive->name, device_type); | 
|  | else if (removable == 0) | 
|  | printk(KERN_ERR "%s: %s: the removable flag is not set\n", | 
|  | s, drive->name); | 
|  | else if (drive->media == ide_floppy && drq_type == 3) | 
|  | printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not " | 
|  | "supported\n", s, drive->name, drq_type); | 
|  | else if (packet_size != 0) | 
|  | printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 " | 
|  | "bytes\n", s, drive->name, packet_size); | 
|  | else | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_check_atapi_device); | 
|  |  | 
|  | void ide_init_pc(struct ide_atapi_pc *pc) | 
|  | { | 
|  | memset(pc, 0, sizeof(*pc)); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_init_pc); | 
|  |  | 
|  | /* | 
|  | * Add a special packet command request to the tail of the request queue, | 
|  | * and wait for it to be serviced. | 
|  | */ | 
|  | int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, | 
|  | struct ide_atapi_pc *pc, void *buf, unsigned int bufflen) | 
|  | { | 
|  | struct request *rq; | 
|  | int error; | 
|  |  | 
|  | rq = blk_get_request(drive->queue, READ, __GFP_WAIT); | 
|  | rq->cmd_type = REQ_TYPE_DRV_PRIV; | 
|  | rq->special = (char *)pc; | 
|  |  | 
|  | if (buf && bufflen) { | 
|  | error = blk_rq_map_kern(drive->queue, rq, buf, bufflen, | 
|  | GFP_NOIO); | 
|  | if (error) | 
|  | goto put_req; | 
|  | } | 
|  |  | 
|  | memcpy(rq->cmd, pc->c, 12); | 
|  | if (drive->media == ide_tape) | 
|  | rq->cmd[13] = REQ_IDETAPE_PC1; | 
|  | error = blk_execute_rq(drive->queue, disk, rq, 0); | 
|  | put_req: | 
|  | blk_put_request(rq); | 
|  | return error; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_queue_pc_tail); | 
|  |  | 
|  | int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk) | 
|  | { | 
|  | struct ide_atapi_pc pc; | 
|  |  | 
|  | ide_init_pc(&pc); | 
|  | pc.c[0] = TEST_UNIT_READY; | 
|  |  | 
|  | return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_do_test_unit_ready); | 
|  |  | 
|  | int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start) | 
|  | { | 
|  | struct ide_atapi_pc pc; | 
|  |  | 
|  | ide_init_pc(&pc); | 
|  | pc.c[0] = START_STOP; | 
|  | pc.c[4] = start; | 
|  |  | 
|  | if (drive->media == ide_tape) | 
|  | pc.flags |= PC_FLAG_WAIT_FOR_DSC; | 
|  |  | 
|  | return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_do_start_stop); | 
|  |  | 
|  | int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on) | 
|  | { | 
|  | struct ide_atapi_pc pc; | 
|  |  | 
|  | if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) | 
|  | return 0; | 
|  |  | 
|  | ide_init_pc(&pc); | 
|  | pc.c[0] = ALLOW_MEDIUM_REMOVAL; | 
|  | pc.c[4] = on; | 
|  |  | 
|  | return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_set_media_lock); | 
|  |  | 
|  | void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) | 
|  | { | 
|  | ide_init_pc(pc); | 
|  | pc->c[0] = REQUEST_SENSE; | 
|  | if (drive->media == ide_floppy) { | 
|  | pc->c[4] = 255; | 
|  | pc->req_xfer = 18; | 
|  | } else { | 
|  | pc->c[4] = 20; | 
|  | pc->req_xfer = 20; | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); | 
|  |  | 
|  | void ide_prep_sense(ide_drive_t *drive, struct request *rq) | 
|  | { | 
|  | struct request_sense *sense = &drive->sense_data; | 
|  | struct request *sense_rq = &drive->sense_rq; | 
|  | unsigned int cmd_len, sense_len; | 
|  | int err; | 
|  |  | 
|  | switch (drive->media) { | 
|  | case ide_floppy: | 
|  | cmd_len = 255; | 
|  | sense_len = 18; | 
|  | break; | 
|  | case ide_tape: | 
|  | cmd_len = 20; | 
|  | sense_len = 20; | 
|  | break; | 
|  | default: | 
|  | cmd_len = 18; | 
|  | sense_len = 18; | 
|  | } | 
|  |  | 
|  | BUG_ON(sense_len > sizeof(*sense)); | 
|  |  | 
|  | if (rq->cmd_type == REQ_TYPE_ATA_SENSE || drive->sense_rq_armed) | 
|  | return; | 
|  |  | 
|  | memset(sense, 0, sizeof(*sense)); | 
|  |  | 
|  | blk_rq_init(rq->q, sense_rq); | 
|  |  | 
|  | err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len, | 
|  | GFP_NOIO); | 
|  | if (unlikely(err)) { | 
|  | if (printk_ratelimit()) | 
|  | printk(KERN_WARNING PFX "%s: failed to map sense " | 
|  | "buffer\n", drive->name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sense_rq->rq_disk = rq->rq_disk; | 
|  | sense_rq->cmd[0] = GPCMD_REQUEST_SENSE; | 
|  | sense_rq->cmd[4] = cmd_len; | 
|  | sense_rq->cmd_type = REQ_TYPE_ATA_SENSE; | 
|  | sense_rq->cmd_flags |= REQ_PREEMPT; | 
|  |  | 
|  | if (drive->media == ide_tape) | 
|  | sense_rq->cmd[13] = REQ_IDETAPE_PC1; | 
|  |  | 
|  | drive->sense_rq_armed = true; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_prep_sense); | 
|  |  | 
|  | int ide_queue_sense_rq(ide_drive_t *drive, void *special) | 
|  | { | 
|  | /* deferred failure from ide_prep_sense() */ | 
|  | if (!drive->sense_rq_armed) { | 
|  | printk(KERN_WARNING PFX "%s: error queuing a sense request\n", | 
|  | drive->name); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | drive->sense_rq.special = special; | 
|  | drive->sense_rq_armed = false; | 
|  |  | 
|  | drive->hwif->rq = NULL; | 
|  |  | 
|  | elv_add_request(drive->queue, &drive->sense_rq, ELEVATOR_INSERT_FRONT); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_queue_sense_rq); | 
|  |  | 
|  | /* | 
|  | * Called when an error was detected during the last packet command. | 
|  | * We queue a request sense packet command at the head of the request | 
|  | * queue. | 
|  | */ | 
|  | void ide_retry_pc(ide_drive_t *drive) | 
|  | { | 
|  | struct request *failed_rq = drive->hwif->rq; | 
|  | struct request *sense_rq = &drive->sense_rq; | 
|  | struct ide_atapi_pc *pc = &drive->request_sense_pc; | 
|  |  | 
|  | (void)ide_read_error(drive); | 
|  |  | 
|  | /* init pc from sense_rq */ | 
|  | ide_init_pc(pc); | 
|  | memcpy(pc->c, sense_rq->cmd, 12); | 
|  |  | 
|  | if (drive->media == ide_tape) | 
|  | drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC; | 
|  |  | 
|  | /* | 
|  | * Push back the failed request and put request sense on top | 
|  | * of it.  The failed command will be retried after sense data | 
|  | * is acquired. | 
|  | */ | 
|  | drive->hwif->rq = NULL; | 
|  | ide_requeue_and_plug(drive, failed_rq); | 
|  | if (ide_queue_sense_rq(drive, pc)) { | 
|  | blk_start_request(failed_rq); | 
|  | ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq)); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_retry_pc); | 
|  |  | 
|  | int ide_cd_expiry(ide_drive_t *drive) | 
|  | { | 
|  | struct request *rq = drive->hwif->rq; | 
|  | unsigned long wait = 0; | 
|  |  | 
|  | debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]); | 
|  |  | 
|  | /* | 
|  | * Some commands are *slow* and normally take a long time to complete. | 
|  | * Usually we can use the ATAPI "disconnect" to bypass this, but not all | 
|  | * commands/drives support that. Let ide_timer_expiry keep polling us | 
|  | * for these. | 
|  | */ | 
|  | switch (rq->cmd[0]) { | 
|  | case GPCMD_BLANK: | 
|  | case GPCMD_FORMAT_UNIT: | 
|  | case GPCMD_RESERVE_RZONE_TRACK: | 
|  | case GPCMD_CLOSE_TRACK: | 
|  | case GPCMD_FLUSH_CACHE: | 
|  | wait = ATAPI_WAIT_PC; | 
|  | break; | 
|  | default: | 
|  | if (!(rq->cmd_flags & REQ_QUIET)) | 
|  | printk(KERN_INFO PFX "cmd 0x%x timed out\n", | 
|  | rq->cmd[0]); | 
|  | wait = 0; | 
|  | break; | 
|  | } | 
|  | return wait; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_cd_expiry); | 
|  |  | 
|  | int ide_cd_get_xferlen(struct request *rq) | 
|  | { | 
|  | switch (rq->cmd_type) { | 
|  | case REQ_TYPE_FS: | 
|  | return 32768; | 
|  | case REQ_TYPE_ATA_SENSE: | 
|  | case REQ_TYPE_BLOCK_PC: | 
|  | case REQ_TYPE_ATA_PC: | 
|  | return blk_rq_bytes(rq); | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); | 
|  |  | 
|  | void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) | 
|  | { | 
|  | struct ide_taskfile tf; | 
|  |  | 
|  | drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT | | 
|  | IDE_VALID_LBAM | IDE_VALID_LBAH); | 
|  |  | 
|  | *bcount = (tf.lbah << 8) | tf.lbam; | 
|  | *ireason = tf.nsect & 3; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); | 
|  |  | 
|  | /* | 
|  | * Check the contents of the interrupt reason register and attempt to recover if | 
|  | * there are problems. | 
|  | * | 
|  | * Returns: | 
|  | * - 0 if everything's ok | 
|  | * - 1 if the request has to be terminated. | 
|  | */ | 
|  | int ide_check_ireason(ide_drive_t *drive, struct request *rq, int len, | 
|  | int ireason, int rw) | 
|  | { | 
|  | ide_hwif_t *hwif = drive->hwif; | 
|  |  | 
|  | debug_log("ireason: 0x%x, rw: 0x%x\n", ireason, rw); | 
|  |  | 
|  | if (ireason == (!rw << 1)) | 
|  | return 0; | 
|  | else if (ireason == (rw << 1)) { | 
|  | printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n", | 
|  | drive->name, __func__); | 
|  |  | 
|  | if (dev_is_idecd(drive)) | 
|  | ide_pad_transfer(drive, rw, len); | 
|  | } else if (!rw && ireason == ATAPI_COD) { | 
|  | if (dev_is_idecd(drive)) { | 
|  | /* | 
|  | * Some drives (ASUS) seem to tell us that status info | 
|  | * is available.  Just get it and ignore. | 
|  | */ | 
|  | (void)hwif->tp_ops->read_status(hwif); | 
|  | return 0; | 
|  | } | 
|  | } else { | 
|  | if (ireason & ATAPI_COD) | 
|  | printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name, | 
|  | __func__); | 
|  |  | 
|  | /* drive wants a command packet, or invalid ireason... */ | 
|  | printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n", | 
|  | drive->name, __func__, ireason); | 
|  | } | 
|  |  | 
|  | if (dev_is_idecd(drive) && rq->cmd_type == REQ_TYPE_ATA_PC) | 
|  | rq->cmd_flags |= REQ_FAILED; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_check_ireason); | 
|  |  | 
|  | /* | 
|  | * This is the usual interrupt handler which will be called during a packet | 
|  | * command.  We will transfer some of the data (as requested by the drive) | 
|  | * and will re-point interrupt handler to us. | 
|  | */ | 
|  | static ide_startstop_t ide_pc_intr(ide_drive_t *drive) | 
|  | { | 
|  | struct ide_atapi_pc *pc = drive->pc; | 
|  | ide_hwif_t *hwif = drive->hwif; | 
|  | struct ide_cmd *cmd = &hwif->cmd; | 
|  | struct request *rq = hwif->rq; | 
|  | const struct ide_tp_ops *tp_ops = hwif->tp_ops; | 
|  | unsigned int timeout, done; | 
|  | u16 bcount; | 
|  | u8 stat, ireason, dsc = 0; | 
|  | u8 write = !!(pc->flags & PC_FLAG_WRITING); | 
|  |  | 
|  | debug_log("Enter %s - interrupt handler\n", __func__); | 
|  |  | 
|  | timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | 
|  | : WAIT_TAPE_CMD; | 
|  |  | 
|  | /* Clear the interrupt */ | 
|  | stat = tp_ops->read_status(hwif); | 
|  |  | 
|  | if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | 
|  | int rc; | 
|  |  | 
|  | drive->waiting_for_dma = 0; | 
|  | rc = hwif->dma_ops->dma_end(drive); | 
|  | ide_dma_unmap_sg(drive, cmd); | 
|  |  | 
|  | if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) { | 
|  | if (drive->media == ide_floppy) | 
|  | printk(KERN_ERR PFX "%s: DMA %s error\n", | 
|  | drive->name, rq_data_dir(pc->rq) | 
|  | ? "write" : "read"); | 
|  | pc->flags |= PC_FLAG_DMA_ERROR; | 
|  | } else | 
|  | rq->resid_len = 0; | 
|  | debug_log("%s: DMA finished\n", drive->name); | 
|  | } | 
|  |  | 
|  | /* No more interrupts */ | 
|  | if ((stat & ATA_DRQ) == 0) { | 
|  | int uptodate, error; | 
|  |  | 
|  | debug_log("Packet command completed, %d bytes transferred\n", | 
|  | blk_rq_bytes(rq)); | 
|  |  | 
|  | pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | 
|  |  | 
|  | local_irq_enable_in_hardirq(); | 
|  |  | 
|  | if (drive->media == ide_tape && | 
|  | (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE) | 
|  | stat &= ~ATA_ERR; | 
|  |  | 
|  | if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) { | 
|  | /* Error detected */ | 
|  | debug_log("%s: I/O error\n", drive->name); | 
|  |  | 
|  | if (drive->media != ide_tape) | 
|  | pc->rq->errors++; | 
|  |  | 
|  | if (rq->cmd[0] == REQUEST_SENSE) { | 
|  | printk(KERN_ERR PFX "%s: I/O error in request " | 
|  | "sense command\n", drive->name); | 
|  | return ide_do_reset(drive); | 
|  | } | 
|  |  | 
|  | debug_log("[cmd %x]: check condition\n", rq->cmd[0]); | 
|  |  | 
|  | /* Retry operation */ | 
|  | ide_retry_pc(drive); | 
|  |  | 
|  | /* queued, but not started */ | 
|  | return ide_stopped; | 
|  | } | 
|  | pc->error = 0; | 
|  |  | 
|  | if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) | 
|  | dsc = 1; | 
|  |  | 
|  | /* | 
|  | * ->pc_callback() might change rq->data_len for | 
|  | * residual count, cache total length. | 
|  | */ | 
|  | done = blk_rq_bytes(rq); | 
|  |  | 
|  | /* Command finished - Call the callback function */ | 
|  | uptodate = drive->pc_callback(drive, dsc); | 
|  |  | 
|  | if (uptodate == 0) | 
|  | drive->failed_pc = NULL; | 
|  |  | 
|  | if (rq->cmd_type == REQ_TYPE_DRV_PRIV) { | 
|  | rq->errors = 0; | 
|  | error = 0; | 
|  | } else { | 
|  |  | 
|  | if (rq->cmd_type != REQ_TYPE_FS && uptodate <= 0) { | 
|  | if (rq->errors == 0) | 
|  | rq->errors = -EIO; | 
|  | } | 
|  |  | 
|  | error = uptodate ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | ide_complete_rq(drive, error, blk_rq_bytes(rq)); | 
|  | return ide_stopped; | 
|  | } | 
|  |  | 
|  | if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | 
|  | pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | 
|  | printk(KERN_ERR PFX "%s: The device wants to issue more " | 
|  | "interrupts in DMA mode\n", drive->name); | 
|  | ide_dma_off(drive); | 
|  | return ide_do_reset(drive); | 
|  | } | 
|  |  | 
|  | /* Get the number of bytes to transfer on this interrupt. */ | 
|  | ide_read_bcount_and_ireason(drive, &bcount, &ireason); | 
|  |  | 
|  | if (ide_check_ireason(drive, rq, bcount, ireason, write)) | 
|  | return ide_do_reset(drive); | 
|  |  | 
|  | done = min_t(unsigned int, bcount, cmd->nleft); | 
|  | ide_pio_bytes(drive, cmd, write, done); | 
|  |  | 
|  | /* Update transferred byte count */ | 
|  | rq->resid_len -= done; | 
|  |  | 
|  | bcount -= done; | 
|  |  | 
|  | if (bcount) | 
|  | ide_pad_transfer(drive, write, bcount); | 
|  |  | 
|  | debug_log("[cmd %x] transferred %d bytes, padded %d bytes, resid: %u\n", | 
|  | rq->cmd[0], done, bcount, rq->resid_len); | 
|  |  | 
|  | /* And set the interrupt handler again */ | 
|  | ide_set_handler(drive, ide_pc_intr, timeout); | 
|  | return ide_started; | 
|  | } | 
|  |  | 
|  | static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf, | 
|  | u16 bcount, u8 dma) | 
|  | { | 
|  | cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO; | 
|  | cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | | 
|  | IDE_VALID_FEATURE | valid_tf; | 
|  | cmd->tf.command = ATA_CMD_PACKET; | 
|  | cmd->tf.feature = dma;		/* Use PIO/DMA */ | 
|  | cmd->tf.lbam    = bcount & 0xff; | 
|  | cmd->tf.lbah    = (bcount >> 8) & 0xff; | 
|  | } | 
|  |  | 
|  | static u8 ide_read_ireason(ide_drive_t *drive) | 
|  | { | 
|  | struct ide_taskfile tf; | 
|  |  | 
|  | drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT); | 
|  |  | 
|  | return tf.nsect & 3; | 
|  | } | 
|  |  | 
|  | static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) | 
|  | { | 
|  | int retries = 100; | 
|  |  | 
|  | while (retries-- && ((ireason & ATAPI_COD) == 0 || | 
|  | (ireason & ATAPI_IO))) { | 
|  | printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing " | 
|  | "a packet command, retrying\n", drive->name); | 
|  | udelay(100); | 
|  | ireason = ide_read_ireason(drive); | 
|  | if (retries == 0) { | 
|  | printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing" | 
|  | " a packet command, ignoring\n", | 
|  | drive->name); | 
|  | ireason |= ATAPI_COD; | 
|  | ireason &= ~ATAPI_IO; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ireason; | 
|  | } | 
|  |  | 
|  | static int ide_delayed_transfer_pc(ide_drive_t *drive) | 
|  | { | 
|  | /* Send the actual packet */ | 
|  | drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12); | 
|  |  | 
|  | /* Timeout for the packet command */ | 
|  | return WAIT_FLOPPY_CMD; | 
|  | } | 
|  |  | 
|  | static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) | 
|  | { | 
|  | struct ide_atapi_pc *uninitialized_var(pc); | 
|  | ide_hwif_t *hwif = drive->hwif; | 
|  | struct request *rq = hwif->rq; | 
|  | ide_expiry_t *expiry; | 
|  | unsigned int timeout; | 
|  | int cmd_len; | 
|  | ide_startstop_t startstop; | 
|  | u8 ireason; | 
|  |  | 
|  | if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { | 
|  | printk(KERN_ERR PFX "%s: Strange, packet command initiated yet " | 
|  | "DRQ isn't asserted\n", drive->name); | 
|  | return startstop; | 
|  | } | 
|  |  | 
|  | if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { | 
|  | if (drive->dma) | 
|  | drive->waiting_for_dma = 1; | 
|  | } | 
|  |  | 
|  | if (dev_is_idecd(drive)) { | 
|  | /* ATAPI commands get padded out to 12 bytes minimum */ | 
|  | cmd_len = COMMAND_SIZE(rq->cmd[0]); | 
|  | if (cmd_len < ATAPI_MIN_CDB_BYTES) | 
|  | cmd_len = ATAPI_MIN_CDB_BYTES; | 
|  |  | 
|  | timeout = rq->timeout; | 
|  | expiry  = ide_cd_expiry; | 
|  | } else { | 
|  | pc = drive->pc; | 
|  |  | 
|  | cmd_len = ATAPI_MIN_CDB_BYTES; | 
|  |  | 
|  | /* | 
|  | * If necessary schedule the packet transfer to occur 'timeout' | 
|  | * milliseconds later in ide_delayed_transfer_pc() after the | 
|  | * device says it's ready for a packet. | 
|  | */ | 
|  | if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { | 
|  | timeout = drive->pc_delay; | 
|  | expiry = &ide_delayed_transfer_pc; | 
|  | } else { | 
|  | timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | 
|  | : WAIT_TAPE_CMD; | 
|  | expiry = NULL; | 
|  | } | 
|  |  | 
|  | ireason = ide_read_ireason(drive); | 
|  | if (drive->media == ide_tape) | 
|  | ireason = ide_wait_ireason(drive, ireason); | 
|  |  | 
|  | if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) { | 
|  | printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while " | 
|  | "issuing a packet command\n", drive->name); | 
|  |  | 
|  | return ide_do_reset(drive); | 
|  | } | 
|  | } | 
|  |  | 
|  | hwif->expiry = expiry; | 
|  |  | 
|  | /* Set the interrupt routine */ | 
|  | ide_set_handler(drive, | 
|  | (dev_is_idecd(drive) ? drive->irq_handler | 
|  | : ide_pc_intr), | 
|  | timeout); | 
|  |  | 
|  | /* Send the actual packet */ | 
|  | if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0) | 
|  | hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len); | 
|  |  | 
|  | /* Begin DMA, if necessary */ | 
|  | if (dev_is_idecd(drive)) { | 
|  | if (drive->dma) | 
|  | hwif->dma_ops->dma_start(drive); | 
|  | } else { | 
|  | if (pc->flags & PC_FLAG_DMA_OK) { | 
|  | pc->flags |= PC_FLAG_DMA_IN_PROGRESS; | 
|  | hwif->dma_ops->dma_start(drive); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ide_started; | 
|  | } | 
|  |  | 
|  | ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) | 
|  | { | 
|  | struct ide_atapi_pc *pc; | 
|  | ide_hwif_t *hwif = drive->hwif; | 
|  | ide_expiry_t *expiry = NULL; | 
|  | struct request *rq = hwif->rq; | 
|  | unsigned int timeout, bytes; | 
|  | u16 bcount; | 
|  | u8 valid_tf; | 
|  | u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT); | 
|  |  | 
|  | if (dev_is_idecd(drive)) { | 
|  | valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL; | 
|  | bcount = ide_cd_get_xferlen(rq); | 
|  | expiry = ide_cd_expiry; | 
|  | timeout = ATAPI_WAIT_PC; | 
|  |  | 
|  | if (drive->dma) | 
|  | drive->dma = !ide_dma_prepare(drive, cmd); | 
|  | } else { | 
|  | pc = drive->pc; | 
|  |  | 
|  | valid_tf = IDE_VALID_DEVICE; | 
|  | bytes = blk_rq_bytes(rq); | 
|  | bcount = ((drive->media == ide_tape) ? bytes | 
|  | : min_t(unsigned int, | 
|  | bytes, 63 * 1024)); | 
|  |  | 
|  | /* We haven't transferred any data yet */ | 
|  | rq->resid_len = bcount; | 
|  |  | 
|  | if (pc->flags & PC_FLAG_DMA_ERROR) { | 
|  | pc->flags &= ~PC_FLAG_DMA_ERROR; | 
|  | ide_dma_off(drive); | 
|  | } | 
|  |  | 
|  | if (pc->flags & PC_FLAG_DMA_OK) | 
|  | drive->dma = !ide_dma_prepare(drive, cmd); | 
|  |  | 
|  | if (!drive->dma) | 
|  | pc->flags &= ~PC_FLAG_DMA_OK; | 
|  |  | 
|  | timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | 
|  | : WAIT_TAPE_CMD; | 
|  | } | 
|  |  | 
|  | ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma); | 
|  |  | 
|  | (void)do_rw_taskfile(drive, cmd); | 
|  |  | 
|  | if (drq_int) { | 
|  | if (drive->dma) | 
|  | drive->waiting_for_dma = 0; | 
|  | hwif->expiry = expiry; | 
|  | } | 
|  |  | 
|  | ide_execute_command(drive, cmd, ide_transfer_pc, timeout); | 
|  |  | 
|  | return drq_int ? ide_started : ide_transfer_pc(drive); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_issue_pc); |