|  | /* | 
|  | Conexant cx24117/cx24132 - Dual DVBS/S2 Satellite demod/tuner driver | 
|  |  | 
|  | Copyright (C) 2013 Luis Alves <ljalvs@gmail.com> | 
|  | July, 6th 2013 | 
|  | First release based on cx24116 driver by: | 
|  | Steven Toth and Georg Acher, Darron Broad, Igor Liplianin | 
|  | Cards currently supported: | 
|  | TBS6980 - Dual DVBS/S2 PCIe card | 
|  | TBS6981 - Dual DVBS/S2 PCIe card | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/firmware.h> | 
|  |  | 
|  | #include "tuner-i2c.h" | 
|  | #include "dvb_frontend.h" | 
|  | #include "cx24117.h" | 
|  |  | 
|  |  | 
|  | #define CX24117_DEFAULT_FIRMWARE "dvb-fe-cx24117.fw" | 
|  | #define CX24117_SEARCH_RANGE_KHZ 5000 | 
|  |  | 
|  | /* known registers */ | 
|  | #define CX24117_REG_COMMAND      (0x00)      /* command buffer */ | 
|  | #define CX24117_REG_EXECUTE      (0x1f)      /* execute command */ | 
|  |  | 
|  | #define CX24117_REG_FREQ3_0      (0x34)      /* frequency */ | 
|  | #define CX24117_REG_FREQ2_0      (0x35) | 
|  | #define CX24117_REG_FREQ1_0      (0x36) | 
|  | #define CX24117_REG_STATE0       (0x39) | 
|  | #define CX24117_REG_SSTATUS0     (0x3a)      /* demod0 signal high / status */ | 
|  | #define CX24117_REG_SIGNAL0      (0x3b) | 
|  | #define CX24117_REG_FREQ5_0      (0x3c)      /* +-freq */ | 
|  | #define CX24117_REG_FREQ6_0      (0x3d) | 
|  | #define CX24117_REG_SRATE2_0     (0x3e)      /* +- 1000 * srate */ | 
|  | #define CX24117_REG_SRATE1_0     (0x3f) | 
|  | #define CX24117_REG_QUALITY2_0   (0x40) | 
|  | #define CX24117_REG_QUALITY1_0   (0x41) | 
|  |  | 
|  | #define CX24117_REG_BER4_0       (0x47) | 
|  | #define CX24117_REG_BER3_0       (0x48) | 
|  | #define CX24117_REG_BER2_0       (0x49) | 
|  | #define CX24117_REG_BER1_0       (0x4a) | 
|  | #define CX24117_REG_DVBS_UCB2_0  (0x4b) | 
|  | #define CX24117_REG_DVBS_UCB1_0  (0x4c) | 
|  | #define CX24117_REG_DVBS2_UCB2_0 (0x50) | 
|  | #define CX24117_REG_DVBS2_UCB1_0 (0x51) | 
|  | #define CX24117_REG_QSTATUS0     (0x93) | 
|  | #define CX24117_REG_CLKDIV0      (0xe6) | 
|  | #define CX24117_REG_RATEDIV0     (0xf0) | 
|  |  | 
|  |  | 
|  | #define CX24117_REG_FREQ3_1      (0x55)      /* frequency */ | 
|  | #define CX24117_REG_FREQ2_1      (0x56) | 
|  | #define CX24117_REG_FREQ1_1      (0x57) | 
|  | #define CX24117_REG_STATE1       (0x5a) | 
|  | #define CX24117_REG_SSTATUS1     (0x5b)      /* demod1 signal high / status */ | 
|  | #define CX24117_REG_SIGNAL1      (0x5c) | 
|  | #define CX24117_REG_FREQ5_1      (0x5d)      /* +- freq */ | 
|  | #define CX24117_REG_FREQ4_1      (0x5e) | 
|  | #define CX24117_REG_SRATE2_1     (0x5f) | 
|  | #define CX24117_REG_SRATE1_1     (0x60) | 
|  | #define CX24117_REG_QUALITY2_1   (0x61) | 
|  | #define CX24117_REG_QUALITY1_1   (0x62) | 
|  | #define CX24117_REG_BER4_1       (0x68) | 
|  | #define CX24117_REG_BER3_1       (0x69) | 
|  | #define CX24117_REG_BER2_1       (0x6a) | 
|  | #define CX24117_REG_BER1_1       (0x6b) | 
|  | #define CX24117_REG_DVBS_UCB2_1  (0x6c) | 
|  | #define CX24117_REG_DVBS_UCB1_1  (0x6d) | 
|  | #define CX24117_REG_DVBS2_UCB2_1 (0x71) | 
|  | #define CX24117_REG_DVBS2_UCB1_1 (0x72) | 
|  | #define CX24117_REG_QSTATUS1     (0x9f) | 
|  | #define CX24117_REG_CLKDIV1      (0xe7) | 
|  | #define CX24117_REG_RATEDIV1     (0xf1) | 
|  |  | 
|  |  | 
|  | /* arg buffer size */ | 
|  | #define CX24117_ARGLEN       (0x1e) | 
|  |  | 
|  | /* rolloff */ | 
|  | #define CX24117_ROLLOFF_020  (0x00) | 
|  | #define CX24117_ROLLOFF_025  (0x01) | 
|  | #define CX24117_ROLLOFF_035  (0x02) | 
|  |  | 
|  | /* pilot bit */ | 
|  | #define CX24117_PILOT_OFF    (0x00) | 
|  | #define CX24117_PILOT_ON     (0x40) | 
|  | #define CX24117_PILOT_AUTO   (0x80) | 
|  |  | 
|  | /* signal status */ | 
|  | #define CX24117_HAS_SIGNAL   (0x01) | 
|  | #define CX24117_HAS_CARRIER  (0x02) | 
|  | #define CX24117_HAS_VITERBI  (0x04) | 
|  | #define CX24117_HAS_SYNCLOCK (0x08) | 
|  | #define CX24117_STATUS_MASK  (0x0f) | 
|  | #define CX24117_SIGNAL_MASK  (0xc0) | 
|  |  | 
|  |  | 
|  | /* arg offset for DiSEqC */ | 
|  | #define CX24117_DISEQC_DEMOD  (1) | 
|  | #define CX24117_DISEQC_BURST  (2) | 
|  | #define CX24117_DISEQC_ARG3_2 (3)   /* unknown value=2 */ | 
|  | #define CX24117_DISEQC_ARG4_0 (4)   /* unknown value=0 */ | 
|  | #define CX24117_DISEQC_ARG5_0 (5)   /* unknown value=0 */ | 
|  | #define CX24117_DISEQC_MSGLEN (6) | 
|  | #define CX24117_DISEQC_MSGOFS (7) | 
|  |  | 
|  | /* DiSEqC burst */ | 
|  | #define CX24117_DISEQC_MINI_A (0) | 
|  | #define CX24117_DISEQC_MINI_B (1) | 
|  |  | 
|  |  | 
|  | #define CX24117_PNE	(0) /* 0 disabled / 2 enabled */ | 
|  | #define CX24117_OCC	(1) /* 0 disabled / 1 enabled */ | 
|  |  | 
|  |  | 
|  | enum cmds { | 
|  | CMD_SET_VCOFREQ    = 0x10, | 
|  | CMD_TUNEREQUEST    = 0x11, | 
|  | CMD_GLOBAL_MPEGCFG = 0x13, | 
|  | CMD_MPEGCFG        = 0x14, | 
|  | CMD_TUNERINIT      = 0x15, | 
|  | CMD_GET_SRATE      = 0x18, | 
|  | CMD_SET_GOLDCODE   = 0x19, | 
|  | CMD_GET_AGCACC     = 0x1a, | 
|  | CMD_DEMODINIT      = 0x1b, | 
|  | CMD_GETCTLACC      = 0x1c, | 
|  |  | 
|  | CMD_LNBCONFIG      = 0x20, | 
|  | CMD_LNBSEND        = 0x21, | 
|  | CMD_LNBDCLEVEL     = 0x22, | 
|  | CMD_LNBPCBCONFIG   = 0x23, | 
|  | CMD_LNBSENDTONEBST = 0x24, | 
|  | CMD_LNBUPDREPLY    = 0x25, | 
|  |  | 
|  | CMD_SET_GPIOMODE   = 0x30, | 
|  | CMD_SET_GPIOEN     = 0x31, | 
|  | CMD_SET_GPIODIR    = 0x32, | 
|  | CMD_SET_GPIOOUT    = 0x33, | 
|  | CMD_ENABLERSCORR   = 0x34, | 
|  | CMD_FWVERSION      = 0x35, | 
|  | CMD_SET_SLEEPMODE  = 0x36, | 
|  | CMD_BERCTRL        = 0x3c, | 
|  | CMD_EVENTCTRL      = 0x3d, | 
|  | }; | 
|  |  | 
|  | static LIST_HEAD(hybrid_tuner_instance_list); | 
|  | static DEFINE_MUTEX(cx24117_list_mutex); | 
|  |  | 
|  | /* The Demod/Tuner can't easily provide these, we cache them */ | 
|  | struct cx24117_tuning { | 
|  | u32 frequency; | 
|  | u32 symbol_rate; | 
|  | enum fe_spectral_inversion inversion; | 
|  | enum fe_code_rate fec; | 
|  |  | 
|  | enum fe_delivery_system delsys; | 
|  | enum fe_modulation modulation; | 
|  | enum fe_pilot pilot; | 
|  | enum fe_rolloff rolloff; | 
|  |  | 
|  | /* Demod values */ | 
|  | u8 fec_val; | 
|  | u8 fec_mask; | 
|  | u8 inversion_val; | 
|  | u8 pilot_val; | 
|  | u8 rolloff_val; | 
|  | }; | 
|  |  | 
|  | /* Basic commands that are sent to the firmware */ | 
|  | struct cx24117_cmd { | 
|  | u8 len; | 
|  | u8 args[CX24117_ARGLEN]; | 
|  | }; | 
|  |  | 
|  | /* common to both fe's */ | 
|  | struct cx24117_priv { | 
|  | u8 demod_address; | 
|  | struct i2c_adapter *i2c; | 
|  | u8 skip_fw_load; | 
|  | struct mutex fe_lock; | 
|  |  | 
|  | /* Used for sharing this struct between demods */ | 
|  | struct tuner_i2c_props i2c_props; | 
|  | struct list_head hybrid_tuner_instance_list; | 
|  | }; | 
|  |  | 
|  | /* one per each fe */ | 
|  | struct cx24117_state { | 
|  | struct cx24117_priv *priv; | 
|  | struct dvb_frontend frontend; | 
|  |  | 
|  | struct cx24117_tuning dcur; | 
|  | struct cx24117_tuning dnxt; | 
|  | struct cx24117_cmd dsec_cmd; | 
|  |  | 
|  | int demod; | 
|  | }; | 
|  |  | 
|  | /* modfec (modulation and FEC) lookup table */ | 
|  | /* Check cx24116.c for a detailed description of each field */ | 
|  | static struct cx24117_modfec { | 
|  | enum fe_delivery_system delivery_system; | 
|  | enum fe_modulation modulation; | 
|  | enum fe_code_rate fec; | 
|  | u8 mask;	/* In DVBS mode this is used to autodetect */ | 
|  | u8 val;		/* Passed to the firmware to indicate mode selection */ | 
|  | } cx24117_modfec_modes[] = { | 
|  | /* QPSK. For unknown rates we set hardware to auto detect 0xfe 0x30 */ | 
|  |  | 
|  | /*mod   fec       mask  val */ | 
|  | { SYS_DVBS, QPSK, FEC_NONE, 0xfe, 0x30 }, | 
|  | { SYS_DVBS, QPSK, FEC_1_2,  0x02, 0x2e }, /* 00000010 00101110 */ | 
|  | { SYS_DVBS, QPSK, FEC_2_3,  0x04, 0x2f }, /* 00000100 00101111 */ | 
|  | { SYS_DVBS, QPSK, FEC_3_4,  0x08, 0x30 }, /* 00001000 00110000 */ | 
|  | { SYS_DVBS, QPSK, FEC_4_5,  0xfe, 0x30 }, /* 000?0000 ?        */ | 
|  | { SYS_DVBS, QPSK, FEC_5_6,  0x20, 0x31 }, /* 00100000 00110001 */ | 
|  | { SYS_DVBS, QPSK, FEC_6_7,  0xfe, 0x30 }, /* 0?000000 ?        */ | 
|  | { SYS_DVBS, QPSK, FEC_7_8,  0x80, 0x32 }, /* 10000000 00110010 */ | 
|  | { SYS_DVBS, QPSK, FEC_8_9,  0xfe, 0x30 }, /* 0000000? ?        */ | 
|  | { SYS_DVBS, QPSK, FEC_AUTO, 0xfe, 0x30 }, | 
|  | /* NBC-QPSK */ | 
|  | { SYS_DVBS2, QPSK, FEC_NONE, 0x00, 0x00 }, | 
|  | { SYS_DVBS2, QPSK, FEC_1_2,  0x00, 0x04 }, | 
|  | { SYS_DVBS2, QPSK, FEC_3_5,  0x00, 0x05 }, | 
|  | { SYS_DVBS2, QPSK, FEC_2_3,  0x00, 0x06 }, | 
|  | { SYS_DVBS2, QPSK, FEC_3_4,  0x00, 0x07 }, | 
|  | { SYS_DVBS2, QPSK, FEC_4_5,  0x00, 0x08 }, | 
|  | { SYS_DVBS2, QPSK, FEC_5_6,  0x00, 0x09 }, | 
|  | { SYS_DVBS2, QPSK, FEC_8_9,  0x00, 0x0a }, | 
|  | { SYS_DVBS2, QPSK, FEC_9_10, 0x00, 0x0b }, | 
|  | { SYS_DVBS2, QPSK, FEC_AUTO, 0x00, 0x00 }, | 
|  | /* 8PSK */ | 
|  | { SYS_DVBS2, PSK_8, FEC_NONE, 0x00, 0x00 }, | 
|  | { SYS_DVBS2, PSK_8, FEC_3_5,  0x00, 0x0c }, | 
|  | { SYS_DVBS2, PSK_8, FEC_2_3,  0x00, 0x0d }, | 
|  | { SYS_DVBS2, PSK_8, FEC_3_4,  0x00, 0x0e }, | 
|  | { SYS_DVBS2, PSK_8, FEC_5_6,  0x00, 0x0f }, | 
|  | { SYS_DVBS2, PSK_8, FEC_8_9,  0x00, 0x10 }, | 
|  | { SYS_DVBS2, PSK_8, FEC_9_10, 0x00, 0x11 }, | 
|  | { SYS_DVBS2, PSK_8, FEC_AUTO, 0x00, 0x00 }, | 
|  | /* | 
|  | * 'val' can be found in the FECSTATUS register when tuning. | 
|  | * FECSTATUS will give the actual FEC in use if tuning was successful. | 
|  | */ | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int cx24117_writereg(struct cx24117_state *state, u8 reg, u8 data) | 
|  | { | 
|  | u8 buf[] = { reg, data }; | 
|  | struct i2c_msg msg = { .addr = state->priv->demod_address, | 
|  | .flags = 0, .buf = buf, .len = 2 }; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d i2c wr @0x%02x=0x%02x\n", | 
|  | __func__, state->demod, reg, data); | 
|  |  | 
|  | ret = i2c_transfer(state->priv->i2c, &msg, 1); | 
|  | if (ret < 0) { | 
|  | dev_warn(&state->priv->i2c->dev, | 
|  | "%s: demod%d i2c wr err(%i) @0x%02x=0x%02x\n", | 
|  | KBUILD_MODNAME, state->demod, ret, reg, data); | 
|  | return ret; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_writecmd(struct cx24117_state *state, | 
|  | struct cx24117_cmd *cmd) | 
|  | { | 
|  | struct i2c_msg msg; | 
|  | u8 buf[CX24117_ARGLEN+1]; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d i2c wr cmd len=%d\n", | 
|  | __func__, state->demod, cmd->len); | 
|  |  | 
|  | buf[0] = CX24117_REG_COMMAND; | 
|  | memcpy(&buf[1], cmd->args, cmd->len); | 
|  |  | 
|  | msg.addr = state->priv->demod_address; | 
|  | msg.flags = 0; | 
|  | msg.len = cmd->len+1; | 
|  | msg.buf = buf; | 
|  | ret = i2c_transfer(state->priv->i2c, &msg, 1); | 
|  | if (ret < 0) { | 
|  | dev_warn(&state->priv->i2c->dev, | 
|  | "%s: demod%d i2c wr cmd err(%i) len=%d\n", | 
|  | KBUILD_MODNAME, state->demod, ret, cmd->len); | 
|  | return ret; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_readreg(struct cx24117_state *state, u8 reg) | 
|  | { | 
|  | int ret; | 
|  | u8 recv = 0; | 
|  | struct i2c_msg msg[] = { | 
|  | { .addr = state->priv->demod_address, .flags = 0, | 
|  | .buf = ®, .len = 1 }, | 
|  | { .addr = state->priv->demod_address, .flags = I2C_M_RD, | 
|  | .buf = &recv, .len = 1 } | 
|  | }; | 
|  |  | 
|  | ret = i2c_transfer(state->priv->i2c, msg, 2); | 
|  | if (ret < 0) { | 
|  | dev_warn(&state->priv->i2c->dev, | 
|  | "%s: demod%d i2c rd err(%d) @0x%x\n", | 
|  | KBUILD_MODNAME, state->demod, ret, reg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d i2c rd @0x%02x=0x%02x\n", | 
|  | __func__, state->demod, reg, recv); | 
|  |  | 
|  | return recv; | 
|  | } | 
|  |  | 
|  | static int cx24117_readregN(struct cx24117_state *state, | 
|  | u8 reg, u8 *buf, int len) | 
|  | { | 
|  | int ret; | 
|  | struct i2c_msg msg[] = { | 
|  | { .addr = state->priv->demod_address, .flags = 0, | 
|  | .buf = ®, .len = 1 }, | 
|  | { .addr = state->priv->demod_address, .flags = I2C_M_RD, | 
|  | .buf = buf, .len = len } | 
|  | }; | 
|  |  | 
|  | ret = i2c_transfer(state->priv->i2c, msg, 2); | 
|  | if (ret < 0) { | 
|  | dev_warn(&state->priv->i2c->dev, | 
|  | "%s: demod%d i2c rd err(%d) @0x%x\n", | 
|  | KBUILD_MODNAME, state->demod, ret, reg); | 
|  | return ret; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_set_inversion(struct cx24117_state *state, | 
|  | enum fe_spectral_inversion inversion) | 
|  | { | 
|  | dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n", | 
|  | __func__, inversion, state->demod); | 
|  |  | 
|  | switch (inversion) { | 
|  | case INVERSION_OFF: | 
|  | state->dnxt.inversion_val = 0x00; | 
|  | break; | 
|  | case INVERSION_ON: | 
|  | state->dnxt.inversion_val = 0x04; | 
|  | break; | 
|  | case INVERSION_AUTO: | 
|  | state->dnxt.inversion_val = 0x0C; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | state->dnxt.inversion = inversion; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_lookup_fecmod(struct cx24117_state *state, | 
|  | enum fe_delivery_system d, enum fe_modulation m, enum fe_code_rate f) | 
|  | { | 
|  | int i, ret = -EINVAL; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s(demod(0x%02x,0x%02x) demod%d\n", | 
|  | __func__, m, f, state->demod); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(cx24117_modfec_modes); i++) { | 
|  | if ((d == cx24117_modfec_modes[i].delivery_system) && | 
|  | (m == cx24117_modfec_modes[i].modulation) && | 
|  | (f == cx24117_modfec_modes[i].fec)) { | 
|  | ret = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cx24117_set_fec(struct cx24117_state *state, | 
|  | enum fe_delivery_system delsys, | 
|  | enum fe_modulation mod, | 
|  | enum fe_code_rate fec) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s(0x%02x,0x%02x) demod%d\n", | 
|  | __func__, mod, fec, state->demod); | 
|  |  | 
|  | ret = cx24117_lookup_fecmod(state, delsys, mod, fec); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | state->dnxt.fec = fec; | 
|  | state->dnxt.fec_val = cx24117_modfec_modes[ret].val; | 
|  | state->dnxt.fec_mask = cx24117_modfec_modes[ret].mask; | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d mask/val = 0x%02x/0x%02x\n", __func__, | 
|  | state->demod, state->dnxt.fec_mask, state->dnxt.fec_val); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_set_symbolrate(struct cx24117_state *state, u32 rate) | 
|  | { | 
|  | dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n", | 
|  | __func__, rate, state->demod); | 
|  |  | 
|  | state->dnxt.symbol_rate = rate; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d symbol_rate = %d\n", | 
|  | __func__, state->demod, rate); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_load_firmware(struct dvb_frontend *fe, | 
|  | const struct firmware *fw); | 
|  |  | 
|  | static int cx24117_firmware_ondemand(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | const struct firmware *fw; | 
|  | int ret = 0; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d skip_fw_load=%d\n", | 
|  | __func__, state->demod, state->priv->skip_fw_load); | 
|  |  | 
|  | if (state->priv->skip_fw_load) | 
|  | return 0; | 
|  |  | 
|  | /* check if firmware is already running */ | 
|  | if (cx24117_readreg(state, 0xeb) != 0xa) { | 
|  | /* Load firmware */ | 
|  | /* request the firmware, this will block until loaded */ | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: Waiting for firmware upload (%s)...\n", | 
|  | __func__, CX24117_DEFAULT_FIRMWARE); | 
|  | ret = request_firmware(&fw, CX24117_DEFAULT_FIRMWARE, | 
|  | state->priv->i2c->dev.parent); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: Waiting for firmware upload(2)...\n", __func__); | 
|  | if (ret) { | 
|  | dev_err(&state->priv->i2c->dev, | 
|  | "%s: No firmware uploaded " | 
|  | "(timeout or file not found?)\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Make sure we don't recurse back through here | 
|  | * during loading */ | 
|  | state->priv->skip_fw_load = 1; | 
|  |  | 
|  | ret = cx24117_load_firmware(fe, fw); | 
|  | if (ret) | 
|  | dev_err(&state->priv->i2c->dev, | 
|  | "%s: Writing firmware failed\n", __func__); | 
|  | release_firmware(fw); | 
|  |  | 
|  | dev_info(&state->priv->i2c->dev, | 
|  | "%s: Firmware upload %s\n", __func__, | 
|  | ret == 0 ? "complete" : "failed"); | 
|  |  | 
|  | /* Ensure firmware is always loaded if required */ | 
|  | state->priv->skip_fw_load = 0; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Take a basic firmware command structure, format it | 
|  | * and forward it for processing | 
|  | */ | 
|  | static int cx24117_cmd_execute_nolock(struct dvb_frontend *fe, | 
|  | struct cx24117_cmd *cmd) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | int i, ret; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | /* Load the firmware if required */ | 
|  | ret = cx24117_firmware_ondemand(fe); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | /* Write the command */ | 
|  | cx24117_writecmd(state, cmd); | 
|  |  | 
|  | /* Start execution and wait for cmd to terminate */ | 
|  | cx24117_writereg(state, CX24117_REG_EXECUTE, 0x01); | 
|  | i = 0; | 
|  | while (cx24117_readreg(state, CX24117_REG_EXECUTE)) { | 
|  | msleep(20); | 
|  | if (i++ > 40) { | 
|  | /* Avoid looping forever if the firmware does | 
|  | not respond */ | 
|  | dev_warn(&state->priv->i2c->dev, | 
|  | "%s() Firmware not responding\n", __func__); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_cmd_execute(struct dvb_frontend *fe, struct cx24117_cmd *cmd) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&state->priv->fe_lock); | 
|  | ret = cx24117_cmd_execute_nolock(fe, cmd); | 
|  | mutex_unlock(&state->priv->fe_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cx24117_load_firmware(struct dvb_frontend *fe, | 
|  | const struct firmware *fw) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct cx24117_cmd cmd; | 
|  | int i, ret; | 
|  | unsigned char vers[4]; | 
|  |  | 
|  | struct i2c_msg msg; | 
|  | u8 *buf; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d FW is %zu bytes (%02x %02x .. %02x %02x)\n", | 
|  | __func__, state->demod, fw->size, fw->data[0], fw->data[1], | 
|  | fw->data[fw->size - 2], fw->data[fw->size - 1]); | 
|  |  | 
|  | cx24117_writereg(state, 0xea, 0x00); | 
|  | cx24117_writereg(state, 0xea, 0x01); | 
|  | cx24117_writereg(state, 0xea, 0x00); | 
|  |  | 
|  | cx24117_writereg(state, 0xce, 0x92); | 
|  |  | 
|  | cx24117_writereg(state, 0xfb, 0x00); | 
|  | cx24117_writereg(state, 0xfc, 0x00); | 
|  |  | 
|  | cx24117_writereg(state, 0xc3, 0x04); | 
|  | cx24117_writereg(state, 0xc4, 0x04); | 
|  |  | 
|  | cx24117_writereg(state, 0xce, 0x00); | 
|  | cx24117_writereg(state, 0xcf, 0x00); | 
|  |  | 
|  | cx24117_writereg(state, 0xea, 0x00); | 
|  | cx24117_writereg(state, 0xeb, 0x0c); | 
|  | cx24117_writereg(state, 0xec, 0x06); | 
|  | cx24117_writereg(state, 0xed, 0x05); | 
|  | cx24117_writereg(state, 0xee, 0x03); | 
|  | cx24117_writereg(state, 0xef, 0x05); | 
|  |  | 
|  | cx24117_writereg(state, 0xf3, 0x03); | 
|  | cx24117_writereg(state, 0xf4, 0x44); | 
|  |  | 
|  | cx24117_writereg(state, CX24117_REG_RATEDIV0, 0x04); | 
|  | cx24117_writereg(state, CX24117_REG_CLKDIV0, 0x02); | 
|  |  | 
|  | cx24117_writereg(state, CX24117_REG_RATEDIV1, 0x04); | 
|  | cx24117_writereg(state, CX24117_REG_CLKDIV1, 0x02); | 
|  |  | 
|  | cx24117_writereg(state, 0xf2, 0x04); | 
|  | cx24117_writereg(state, 0xe8, 0x02); | 
|  | cx24117_writereg(state, 0xea, 0x01); | 
|  | cx24117_writereg(state, 0xc8, 0x00); | 
|  | cx24117_writereg(state, 0xc9, 0x00); | 
|  | cx24117_writereg(state, 0xca, 0x00); | 
|  | cx24117_writereg(state, 0xcb, 0x00); | 
|  | cx24117_writereg(state, 0xcc, 0x00); | 
|  | cx24117_writereg(state, 0xcd, 0x00); | 
|  | cx24117_writereg(state, 0xe4, 0x03); | 
|  | cx24117_writereg(state, 0xeb, 0x0a); | 
|  |  | 
|  | cx24117_writereg(state, 0xfb, 0x00); | 
|  | cx24117_writereg(state, 0xe0, 0x76); | 
|  | cx24117_writereg(state, 0xf7, 0x81); | 
|  | cx24117_writereg(state, 0xf8, 0x00); | 
|  | cx24117_writereg(state, 0xf9, 0x00); | 
|  |  | 
|  | buf = kmalloc(fw->size + 1, GFP_KERNEL); | 
|  | if (buf == NULL) { | 
|  | state->priv->skip_fw_load = 0; | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* fw upload reg */ | 
|  | buf[0] = 0xfa; | 
|  | memcpy(&buf[1], fw->data, fw->size); | 
|  |  | 
|  | /* prepare i2c message to send */ | 
|  | msg.addr = state->priv->demod_address; | 
|  | msg.flags = 0; | 
|  | msg.len = fw->size + 1; | 
|  | msg.buf = buf; | 
|  |  | 
|  | /* send fw */ | 
|  | ret = i2c_transfer(state->priv->i2c, &msg, 1); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | kfree(buf); | 
|  |  | 
|  | cx24117_writereg(state, 0xf7, 0x0c); | 
|  | cx24117_writereg(state, 0xe0, 0x00); | 
|  |  | 
|  | /* Init demodulator */ | 
|  | cmd.args[0] = CMD_DEMODINIT; | 
|  | cmd.args[1] = 0x00; | 
|  | cmd.args[2] = 0x01; | 
|  | cmd.args[3] = 0x00; | 
|  | cmd.len = 4; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto error; | 
|  |  | 
|  | /* Set VCO frequency */ | 
|  | cmd.args[0] = CMD_SET_VCOFREQ; | 
|  | cmd.args[1] = 0x06; | 
|  | cmd.args[2] = 0x2b; | 
|  | cmd.args[3] = 0xd8; | 
|  | cmd.args[4] = 0xa5; | 
|  | cmd.args[5] = 0xee; | 
|  | cmd.args[6] = 0x03; | 
|  | cmd.args[7] = 0x9d; | 
|  | cmd.args[8] = 0xfc; | 
|  | cmd.args[9] = 0x06; | 
|  | cmd.args[10] = 0x02; | 
|  | cmd.args[11] = 0x9d; | 
|  | cmd.args[12] = 0xfc; | 
|  | cmd.len = 13; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto error; | 
|  |  | 
|  | /* Tuner init */ | 
|  | cmd.args[0] = CMD_TUNERINIT; | 
|  | cmd.args[1] = 0x00; | 
|  | cmd.args[2] = 0x01; | 
|  | cmd.args[3] = 0x00; | 
|  | cmd.args[4] = 0x00; | 
|  | cmd.args[5] = 0x01; | 
|  | cmd.args[6] = 0x01; | 
|  | cmd.args[7] = 0x01; | 
|  | cmd.args[8] = 0x00; | 
|  | cmd.args[9] = 0x05; | 
|  | cmd.args[10] = 0x02; | 
|  | cmd.args[11] = 0x02; | 
|  | cmd.args[12] = 0x00; | 
|  | cmd.len = 13; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto error; | 
|  |  | 
|  | /* Global MPEG config */ | 
|  | cmd.args[0] = CMD_GLOBAL_MPEGCFG; | 
|  | cmd.args[1] = 0x00; | 
|  | cmd.args[2] = 0x00; | 
|  | cmd.args[3] = 0x00; | 
|  | cmd.args[4] = 0x01; | 
|  | cmd.args[5] = 0x00; | 
|  | cmd.len = 6; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto error; | 
|  |  | 
|  | /* MPEG config for each demod */ | 
|  | for (i = 0; i < 2; i++) { | 
|  | cmd.args[0] = CMD_MPEGCFG; | 
|  | cmd.args[1] = (u8) i; | 
|  | cmd.args[2] = 0x00; | 
|  | cmd.args[3] = 0x05; | 
|  | cmd.args[4] = 0x00; | 
|  | cmd.args[5] = 0x00; | 
|  | cmd.args[6] = 0x55; | 
|  | cmd.args[7] = 0x00; | 
|  | cmd.len = 8; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | cx24117_writereg(state, 0xce, 0xc0); | 
|  | cx24117_writereg(state, 0xcf, 0x00); | 
|  | cx24117_writereg(state, 0xe5, 0x04); | 
|  |  | 
|  | /* Get firmware version */ | 
|  | cmd.args[0] = CMD_FWVERSION; | 
|  | cmd.len = 2; | 
|  | for (i = 0; i < 4; i++) { | 
|  | cmd.args[1] = i; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto error; | 
|  | vers[i] = cx24117_readreg(state, 0x33); | 
|  | } | 
|  | dev_info(&state->priv->i2c->dev, | 
|  | "%s: FW version %i.%i.%i.%i\n", __func__, | 
|  | vers[0], vers[1], vers[2], vers[3]); | 
|  | return 0; | 
|  | error: | 
|  | state->priv->skip_fw_load = 0; | 
|  | dev_err(&state->priv->i2c->dev, "%s() Error running FW.\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cx24117_read_status(struct dvb_frontend *fe, enum fe_status *status) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | int lock; | 
|  |  | 
|  | lock = cx24117_readreg(state, | 
|  | (state->demod == 0) ? CX24117_REG_SSTATUS0 : | 
|  | CX24117_REG_SSTATUS1) & | 
|  | CX24117_STATUS_MASK; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d status = 0x%02x\n", | 
|  | __func__, state->demod, lock); | 
|  |  | 
|  | *status = 0; | 
|  |  | 
|  | if (lock & CX24117_HAS_SIGNAL) | 
|  | *status |= FE_HAS_SIGNAL; | 
|  | if (lock & CX24117_HAS_CARRIER) | 
|  | *status |= FE_HAS_CARRIER; | 
|  | if (lock & CX24117_HAS_VITERBI) | 
|  | *status |= FE_HAS_VITERBI; | 
|  | if (lock & CX24117_HAS_SYNCLOCK) | 
|  | *status |= FE_HAS_SYNC | FE_HAS_LOCK; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_read_ber(struct dvb_frontend *fe, u32 *ber) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | int ret; | 
|  | u8 buf[4]; | 
|  | u8 base_reg = (state->demod == 0) ? | 
|  | CX24117_REG_BER4_0 : | 
|  | CX24117_REG_BER4_1; | 
|  |  | 
|  | ret = cx24117_readregN(state, base_reg, buf, 4); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | *ber = (buf[0] << 24) | (buf[1] << 16) | | 
|  | (buf[1] << 8) | buf[0]; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d ber=0x%04x\n", | 
|  | __func__, state->demod, *ber); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_read_signal_strength(struct dvb_frontend *fe, | 
|  | u16 *signal_strength) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct cx24117_cmd cmd; | 
|  | int ret; | 
|  | u16 sig_reading; | 
|  | u8 buf[2]; | 
|  | u8 reg = (state->demod == 0) ? | 
|  | CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1; | 
|  |  | 
|  | /* Read AGC accumulator register */ | 
|  | cmd.args[0] = CMD_GET_AGCACC; | 
|  | cmd.args[1] = (u8) state->demod; | 
|  | cmd.len = 2; | 
|  | ret = cx24117_cmd_execute(fe, &cmd); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | ret = cx24117_readregN(state, reg, buf, 2); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  | sig_reading = ((buf[0] & CX24117_SIGNAL_MASK) << 2) | buf[1]; | 
|  |  | 
|  | *signal_strength = -100 * sig_reading + 94324; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d raw / cooked = 0x%04x / 0x%04x\n", | 
|  | __func__, state->demod, sig_reading, *signal_strength); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_read_snr(struct dvb_frontend *fe, u16 *snr) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | int ret; | 
|  | u8 buf[2]; | 
|  | u8 reg = (state->demod == 0) ? | 
|  | CX24117_REG_QUALITY2_0 : CX24117_REG_QUALITY2_1; | 
|  |  | 
|  | ret = cx24117_readregN(state, reg, buf, 2); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | *snr = (buf[0] << 8) | buf[1]; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d snr = 0x%04x\n", | 
|  | __func__, state->demod, *snr); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cx24117_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | enum fe_delivery_system delsys = fe->dtv_property_cache.delivery_system; | 
|  | int ret; | 
|  | u8 buf[2]; | 
|  | u8 reg = (state->demod == 0) ? | 
|  | CX24117_REG_DVBS_UCB2_0 : | 
|  | CX24117_REG_DVBS_UCB2_1; | 
|  |  | 
|  | switch (delsys) { | 
|  | case SYS_DVBS: | 
|  | break; | 
|  | case SYS_DVBS2: | 
|  | reg += (CX24117_REG_DVBS2_UCB2_0 - CX24117_REG_DVBS_UCB2_0); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = cx24117_readregN(state, reg, buf, 2); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  | *ucblocks = (buf[0] << 8) | buf[1]; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d ucb=0x%04x\n", | 
|  | __func__, state->demod, *ucblocks); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Overwrite the current tuning params, we are about to tune */ | 
|  | static void cx24117_clone_params(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | state->dcur = state->dnxt; | 
|  | } | 
|  |  | 
|  | /* Wait for LNB */ | 
|  | static int cx24117_wait_for_lnb(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | int i; | 
|  | u8 val, reg = (state->demod == 0) ? CX24117_REG_QSTATUS0 : | 
|  | CX24117_REG_QSTATUS1; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d qstatus = 0x%02x\n", | 
|  | __func__, state->demod, cx24117_readreg(state, reg)); | 
|  |  | 
|  | /* Wait for up to 300 ms */ | 
|  | for (i = 0; i < 10; i++) { | 
|  | val = cx24117_readreg(state, reg) & 0x01; | 
|  | if (val != 0) | 
|  | return 0; | 
|  | msleep(30); | 
|  | } | 
|  |  | 
|  | dev_warn(&state->priv->i2c->dev, "%s: demod%d LNB not ready\n", | 
|  | KBUILD_MODNAME, state->demod); | 
|  |  | 
|  | return -ETIMEDOUT; /* -EBUSY ? */ | 
|  | } | 
|  |  | 
|  | static int cx24117_set_voltage(struct dvb_frontend *fe, | 
|  | enum fe_sec_voltage voltage) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct cx24117_cmd cmd; | 
|  | int ret; | 
|  | u8 reg = (state->demod == 0) ? 0x10 : 0x20; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d %s\n", | 
|  | __func__, state->demod, | 
|  | voltage == SEC_VOLTAGE_13 ? "SEC_VOLTAGE_13" : | 
|  | voltage == SEC_VOLTAGE_18 ? "SEC_VOLTAGE_18" : | 
|  | "SEC_VOLTAGE_OFF"); | 
|  |  | 
|  | /* Prepare a set GPIO logic level CMD */ | 
|  | cmd.args[0] = CMD_SET_GPIOOUT; | 
|  | cmd.args[2] = reg; /* mask */ | 
|  | cmd.len = 3; | 
|  |  | 
|  | if ((voltage == SEC_VOLTAGE_13) || | 
|  | (voltage == SEC_VOLTAGE_18)) { | 
|  | /* power on LNB */ | 
|  | cmd.args[1] = reg; | 
|  | ret = cx24117_cmd_execute(fe, &cmd); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | ret = cx24117_wait_for_lnb(fe); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | /* Wait for voltage/min repeat delay */ | 
|  | msleep(100); | 
|  |  | 
|  | /* Set 13V/18V select pin */ | 
|  | cmd.args[0] = CMD_LNBDCLEVEL; | 
|  | cmd.args[1] = state->demod ? 0 : 1; | 
|  | cmd.args[2] = (voltage == SEC_VOLTAGE_18 ? 0x01 : 0x00); | 
|  | cmd.len = 3; | 
|  | ret = cx24117_cmd_execute(fe, &cmd); | 
|  |  | 
|  | /* Min delay time before DiSEqC send */ | 
|  | msleep(20); | 
|  | } else { | 
|  | /* power off LNB */ | 
|  | cmd.args[1] = 0x00; | 
|  | ret = cx24117_cmd_execute(fe, &cmd); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cx24117_set_tone(struct dvb_frontend *fe, | 
|  | enum fe_sec_tone_mode tone) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct cx24117_cmd cmd; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s(%d) demod%d\n", | 
|  | __func__, state->demod, tone); | 
|  | if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { | 
|  | dev_warn(&state->priv->i2c->dev, "%s: demod%d invalid tone=%d\n", | 
|  | KBUILD_MODNAME, state->demod, tone); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Wait for LNB ready */ | 
|  | ret = cx24117_wait_for_lnb(fe); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | /* Min delay time after DiSEqC send */ | 
|  | msleep(20); | 
|  |  | 
|  | /* Set the tone */ | 
|  | cmd.args[0] = CMD_LNBPCBCONFIG; | 
|  | cmd.args[1] = (state->demod ? 0 : 1); | 
|  | cmd.args[2] = 0x00; | 
|  | cmd.args[3] = 0x00; | 
|  | cmd.len = 5; | 
|  | switch (tone) { | 
|  | case SEC_TONE_ON: | 
|  | cmd.args[4] = 0x01; | 
|  | break; | 
|  | case SEC_TONE_OFF: | 
|  | cmd.args[4] = 0x00; | 
|  | break; | 
|  | } | 
|  |  | 
|  | msleep(20); | 
|  |  | 
|  | return cx24117_cmd_execute(fe, &cmd); | 
|  | } | 
|  |  | 
|  | /* Initialise DiSEqC */ | 
|  | static int cx24117_diseqc_init(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  |  | 
|  | /* Prepare a DiSEqC command */ | 
|  | state->dsec_cmd.args[0] = CMD_LNBSEND; | 
|  |  | 
|  | /* demod */ | 
|  | state->dsec_cmd.args[CX24117_DISEQC_DEMOD] = state->demod ? 0 : 1; | 
|  |  | 
|  | /* DiSEqC burst */ | 
|  | state->dsec_cmd.args[CX24117_DISEQC_BURST] = CX24117_DISEQC_MINI_A; | 
|  |  | 
|  | /* Unknown */ | 
|  | state->dsec_cmd.args[CX24117_DISEQC_ARG3_2] = 0x02; | 
|  | state->dsec_cmd.args[CX24117_DISEQC_ARG4_0] = 0x00; | 
|  |  | 
|  | /* Continuation flag? */ | 
|  | state->dsec_cmd.args[CX24117_DISEQC_ARG5_0] = 0x00; | 
|  |  | 
|  | /* DiSEqC message length */ | 
|  | state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = 0x00; | 
|  |  | 
|  | /* Command length */ | 
|  | state->dsec_cmd.len = 7; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Send DiSEqC message */ | 
|  | static int cx24117_send_diseqc_msg(struct dvb_frontend *fe, | 
|  | struct dvb_diseqc_master_cmd *d) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | int i, ret; | 
|  |  | 
|  | /* Dump DiSEqC message */ | 
|  | dev_dbg(&state->priv->i2c->dev, "%s: demod %d (", | 
|  | __func__, state->demod); | 
|  | for (i = 0; i < d->msg_len; i++) | 
|  | dev_dbg(&state->priv->i2c->dev, "0x%02x ", d->msg[i]); | 
|  | dev_dbg(&state->priv->i2c->dev, ")\n"); | 
|  |  | 
|  | /* Validate length */ | 
|  | if (d->msg_len > sizeof(d->msg)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* DiSEqC message */ | 
|  | for (i = 0; i < d->msg_len; i++) | 
|  | state->dsec_cmd.args[CX24117_DISEQC_MSGOFS + i] = d->msg[i]; | 
|  |  | 
|  | /* DiSEqC message length */ | 
|  | state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] = d->msg_len; | 
|  |  | 
|  | /* Command length */ | 
|  | state->dsec_cmd.len = CX24117_DISEQC_MSGOFS + | 
|  | state->dsec_cmd.args[CX24117_DISEQC_MSGLEN]; | 
|  |  | 
|  | /* | 
|  | * Message is sent with derived else cached burst | 
|  | * | 
|  | * WRITE PORT GROUP COMMAND 38 | 
|  | * | 
|  | * 0/A/A: E0 10 38 F0..F3 | 
|  | * 1/B/B: E0 10 38 F4..F7 | 
|  | * 2/C/A: E0 10 38 F8..FB | 
|  | * 3/D/B: E0 10 38 FC..FF | 
|  | * | 
|  | * databyte[3]= 8421:8421 | 
|  | *              ABCD:WXYZ | 
|  | *              CLR :SET | 
|  | * | 
|  | *              WX= PORT SELECT 0..3    (X=TONEBURST) | 
|  | *              Y = VOLTAGE             (0=13V, 1=18V) | 
|  | *              Z = BAND                (0=LOW, 1=HIGH(22K)) | 
|  | */ | 
|  | if (d->msg_len >= 4 && d->msg[2] == 0x38) | 
|  | state->dsec_cmd.args[CX24117_DISEQC_BURST] = | 
|  | ((d->msg[3] & 4) >> 2); | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d burst=%d\n", | 
|  | __func__, state->demod, | 
|  | state->dsec_cmd.args[CX24117_DISEQC_BURST]); | 
|  |  | 
|  | /* Wait for LNB ready */ | 
|  | ret = cx24117_wait_for_lnb(fe); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | /* Wait for voltage/min repeat delay */ | 
|  | msleep(100); | 
|  |  | 
|  | /* Command */ | 
|  | ret = cx24117_cmd_execute(fe, &state->dsec_cmd); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  | /* | 
|  | * Wait for send | 
|  | * | 
|  | * Eutelsat spec: | 
|  | * >15ms delay          + (XXX determine if FW does this, see set_tone) | 
|  | *  13.5ms per byte     + | 
|  | * >15ms delay          + | 
|  | *  12.5ms burst        + | 
|  | * >15ms delay            (XXX determine if FW does this, see set_tone) | 
|  | */ | 
|  | msleep((state->dsec_cmd.args[CX24117_DISEQC_MSGLEN] << 4) + 60); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Send DiSEqC burst */ | 
|  | static int cx24117_diseqc_send_burst(struct dvb_frontend *fe, | 
|  | enum fe_sec_mini_cmd burst) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s(%d) demod=%d\n", | 
|  | __func__, burst, state->demod); | 
|  |  | 
|  | /* DiSEqC burst */ | 
|  | if (burst == SEC_MINI_A) | 
|  | state->dsec_cmd.args[CX24117_DISEQC_BURST] = | 
|  | CX24117_DISEQC_MINI_A; | 
|  | else if (burst == SEC_MINI_B) | 
|  | state->dsec_cmd.args[CX24117_DISEQC_BURST] = | 
|  | CX24117_DISEQC_MINI_B; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int cx24117_get_priv(struct cx24117_priv **priv, | 
|  | struct i2c_adapter *i2c, u8 client_address) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&cx24117_list_mutex); | 
|  | ret = hybrid_tuner_request_state(struct cx24117_priv, (*priv), | 
|  | hybrid_tuner_instance_list, i2c, client_address, "cx24117"); | 
|  | mutex_unlock(&cx24117_list_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void cx24117_release_priv(struct cx24117_priv *priv) | 
|  | { | 
|  | mutex_lock(&cx24117_list_mutex); | 
|  | if (priv != NULL) | 
|  | hybrid_tuner_release_state(priv); | 
|  | mutex_unlock(&cx24117_list_mutex); | 
|  | } | 
|  |  | 
|  | static void cx24117_release(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | dev_dbg(&state->priv->i2c->dev, "%s demod%d\n", | 
|  | __func__, state->demod); | 
|  | cx24117_release_priv(state->priv); | 
|  | kfree(state); | 
|  | } | 
|  |  | 
|  | static struct dvb_frontend_ops cx24117_ops; | 
|  |  | 
|  | struct dvb_frontend *cx24117_attach(const struct cx24117_config *config, | 
|  | struct i2c_adapter *i2c) | 
|  | { | 
|  | struct cx24117_state *state = NULL; | 
|  | struct cx24117_priv *priv = NULL; | 
|  | int demod = 0; | 
|  |  | 
|  | /* get the common data struct for both demods */ | 
|  | demod = cx24117_get_priv(&priv, i2c, config->demod_address); | 
|  |  | 
|  | switch (demod) { | 
|  | case 0: | 
|  | dev_err(&i2c->dev, | 
|  | "%s: Error attaching frontend %d\n", | 
|  | KBUILD_MODNAME, demod); | 
|  | goto error1; | 
|  | break; | 
|  | case 1: | 
|  | /* new priv instance */ | 
|  | priv->i2c = i2c; | 
|  | priv->demod_address = config->demod_address; | 
|  | mutex_init(&priv->fe_lock); | 
|  | break; | 
|  | default: | 
|  | /* existing priv instance */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* allocate memory for the internal state */ | 
|  | state = kzalloc(sizeof(struct cx24117_state), GFP_KERNEL); | 
|  | if (state == NULL) | 
|  | goto error2; | 
|  |  | 
|  | state->demod = demod - 1; | 
|  | state->priv = priv; | 
|  |  | 
|  | dev_info(&state->priv->i2c->dev, | 
|  | "%s: Attaching frontend %d\n", | 
|  | KBUILD_MODNAME, state->demod); | 
|  |  | 
|  | /* create dvb_frontend */ | 
|  | memcpy(&state->frontend.ops, &cx24117_ops, | 
|  | sizeof(struct dvb_frontend_ops)); | 
|  | state->frontend.demodulator_priv = state; | 
|  | return &state->frontend; | 
|  |  | 
|  | error2: | 
|  | cx24117_release_priv(priv); | 
|  | error1: | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(cx24117_attach); | 
|  |  | 
|  | /* | 
|  | * Initialise or wake up device | 
|  | * | 
|  | * Power config will reset and load initial firmware if required | 
|  | */ | 
|  | static int cx24117_initfe(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct cx24117_cmd cmd; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | mutex_lock(&state->priv->fe_lock); | 
|  |  | 
|  | /* Set sleep mode off */ | 
|  | cmd.args[0] = CMD_SET_SLEEPMODE; | 
|  | cmd.args[1] = (state->demod ? 1 : 0); | 
|  | cmd.args[2] = 0; | 
|  | cmd.len = 3; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto exit; | 
|  |  | 
|  | ret = cx24117_diseqc_init(fe); | 
|  | if (ret != 0) | 
|  | goto exit; | 
|  |  | 
|  | /* Set BER control */ | 
|  | cmd.args[0] = CMD_BERCTRL; | 
|  | cmd.args[1] = (state->demod ? 1 : 0); | 
|  | cmd.args[2] = 0x10; | 
|  | cmd.args[3] = 0x10; | 
|  | cmd.len = 4; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto exit; | 
|  |  | 
|  | /* Set RS correction (enable/disable) */ | 
|  | cmd.args[0] = CMD_ENABLERSCORR; | 
|  | cmd.args[1] = (state->demod ? 1 : 0); | 
|  | cmd.args[2] = CX24117_OCC; | 
|  | cmd.len = 3; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  | if (ret != 0) | 
|  | goto exit; | 
|  |  | 
|  | /* Set GPIO direction */ | 
|  | /* Set as output - controls LNB power on/off */ | 
|  | cmd.args[0] = CMD_SET_GPIODIR; | 
|  | cmd.args[1] = 0x30; | 
|  | cmd.args[2] = 0x30; | 
|  | cmd.len = 3; | 
|  | ret = cx24117_cmd_execute_nolock(fe, &cmd); | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&state->priv->fe_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Put device to sleep | 
|  | */ | 
|  | static int cx24117_sleep(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct cx24117_cmd cmd; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | /* Set sleep mode on */ | 
|  | cmd.args[0] = CMD_SET_SLEEPMODE; | 
|  | cmd.args[1] = (state->demod ? 1 : 0); | 
|  | cmd.args[2] = 1; | 
|  | cmd.len = 3; | 
|  | return cx24117_cmd_execute(fe, &cmd); | 
|  | } | 
|  |  | 
|  | /* dvb-core told us to tune, the tv property cache will be complete, | 
|  | * it's safe for is to pull values and use them for tuning purposes. | 
|  | */ | 
|  | static int cx24117_set_frontend(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | struct cx24117_cmd cmd; | 
|  | enum fe_status tunerstat; | 
|  | int i, status, ret, retune = 1; | 
|  | u8 reg_clkdiv, reg_ratediv; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | switch (c->delivery_system) { | 
|  | case SYS_DVBS: | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | /* Only QPSK is supported for DVB-S */ | 
|  | if (c->modulation != QPSK) { | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d unsupported modulation (%d)\n", | 
|  | __func__, state->demod, c->modulation); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Pilot doesn't exist in DVB-S, turn bit off */ | 
|  | state->dnxt.pilot_val = CX24117_PILOT_OFF; | 
|  |  | 
|  | /* DVB-S only supports 0.35 */ | 
|  | state->dnxt.rolloff_val = CX24117_ROLLOFF_035; | 
|  | break; | 
|  |  | 
|  | case SYS_DVBS2: | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d DVB-S2\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | /* | 
|  | * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, | 
|  | * but not hardware auto detection | 
|  | */ | 
|  | if (c->modulation != PSK_8 && c->modulation != QPSK) { | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d unsupported modulation (%d)\n", | 
|  | __func__, state->demod, c->modulation); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | switch (c->pilot) { | 
|  | case PILOT_AUTO: | 
|  | state->dnxt.pilot_val = CX24117_PILOT_AUTO; | 
|  | break; | 
|  | case PILOT_OFF: | 
|  | state->dnxt.pilot_val = CX24117_PILOT_OFF; | 
|  | break; | 
|  | case PILOT_ON: | 
|  | state->dnxt.pilot_val = CX24117_PILOT_ON; | 
|  | break; | 
|  | default: | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d unsupported pilot mode (%d)\n", | 
|  | __func__, state->demod, c->pilot); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | switch (c->rolloff) { | 
|  | case ROLLOFF_20: | 
|  | state->dnxt.rolloff_val = CX24117_ROLLOFF_020; | 
|  | break; | 
|  | case ROLLOFF_25: | 
|  | state->dnxt.rolloff_val = CX24117_ROLLOFF_025; | 
|  | break; | 
|  | case ROLLOFF_35: | 
|  | state->dnxt.rolloff_val = CX24117_ROLLOFF_035; | 
|  | break; | 
|  | case ROLLOFF_AUTO: | 
|  | state->dnxt.rolloff_val = CX24117_ROLLOFF_035; | 
|  | /* soft-auto rolloff */ | 
|  | retune = 3; | 
|  | break; | 
|  | default: | 
|  | dev_warn(&state->priv->i2c->dev, | 
|  | "%s: demod%d unsupported rolloff (%d)\n", | 
|  | KBUILD_MODNAME, state->demod, c->rolloff); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | dev_warn(&state->priv->i2c->dev, | 
|  | "%s: demod %d unsupported delivery system (%d)\n", | 
|  | KBUILD_MODNAME, state->demod, c->delivery_system); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | state->dnxt.delsys = c->delivery_system; | 
|  | state->dnxt.modulation = c->modulation; | 
|  | state->dnxt.frequency = c->frequency; | 
|  | state->dnxt.pilot = c->pilot; | 
|  | state->dnxt.rolloff = c->rolloff; | 
|  |  | 
|  | ret = cx24117_set_inversion(state, c->inversion); | 
|  | if (ret !=  0) | 
|  | return ret; | 
|  |  | 
|  | ret = cx24117_set_fec(state, | 
|  | c->delivery_system, c->modulation, c->fec_inner); | 
|  | if (ret !=  0) | 
|  | return ret; | 
|  |  | 
|  | ret = cx24117_set_symbolrate(state, c->symbol_rate); | 
|  | if (ret !=  0) | 
|  | return ret; | 
|  |  | 
|  | /* discard the 'current' tuning parameters and prepare to tune */ | 
|  | cx24117_clone_params(fe); | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: delsys      = %d\n", __func__, state->dcur.delsys); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: modulation  = %d\n", __func__, state->dcur.modulation); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: frequency   = %d\n", __func__, state->dcur.frequency); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: pilot       = %d (val = 0x%02x)\n", __func__, | 
|  | state->dcur.pilot, state->dcur.pilot_val); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: retune      = %d\n", __func__, retune); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: rolloff     = %d (val = 0x%02x)\n", __func__, | 
|  | state->dcur.rolloff, state->dcur.rolloff_val); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: FEC         = %d (mask/val = 0x%02x/0x%02x)\n", __func__, | 
|  | state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val); | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s: Inversion   = %d (val = 0x%02x)\n", __func__, | 
|  | state->dcur.inversion, state->dcur.inversion_val); | 
|  |  | 
|  | /* Prepare a tune request */ | 
|  | cmd.args[0] = CMD_TUNEREQUEST; | 
|  |  | 
|  | /* demod */ | 
|  | cmd.args[1] = state->demod; | 
|  |  | 
|  | /* Frequency */ | 
|  | cmd.args[2] = (state->dcur.frequency & 0xff0000) >> 16; | 
|  | cmd.args[3] = (state->dcur.frequency & 0x00ff00) >> 8; | 
|  | cmd.args[4] = (state->dcur.frequency & 0x0000ff); | 
|  |  | 
|  | /* Symbol Rate */ | 
|  | cmd.args[5] = ((state->dcur.symbol_rate / 1000) & 0xff00) >> 8; | 
|  | cmd.args[6] = ((state->dcur.symbol_rate / 1000) & 0x00ff); | 
|  |  | 
|  | /* Automatic Inversion */ | 
|  | cmd.args[7] = state->dcur.inversion_val; | 
|  |  | 
|  | /* Modulation / FEC / Pilot */ | 
|  | cmd.args[8] = state->dcur.fec_val | state->dcur.pilot_val; | 
|  |  | 
|  | cmd.args[9] = CX24117_SEARCH_RANGE_KHZ >> 8; | 
|  | cmd.args[10] = CX24117_SEARCH_RANGE_KHZ & 0xff; | 
|  |  | 
|  | cmd.args[11] = state->dcur.rolloff_val; | 
|  | cmd.args[12] = state->dcur.fec_mask; | 
|  |  | 
|  | if (state->dcur.symbol_rate > 30000000) { | 
|  | reg_ratediv = 0x04; | 
|  | reg_clkdiv = 0x02; | 
|  | } else if (state->dcur.symbol_rate > 10000000) { | 
|  | reg_ratediv = 0x06; | 
|  | reg_clkdiv = 0x03; | 
|  | } else { | 
|  | reg_ratediv = 0x0a; | 
|  | reg_clkdiv = 0x05; | 
|  | } | 
|  |  | 
|  | cmd.args[13] = reg_ratediv; | 
|  | cmd.args[14] = reg_clkdiv; | 
|  |  | 
|  | cx24117_writereg(state, (state->demod == 0) ? | 
|  | CX24117_REG_CLKDIV0 : CX24117_REG_CLKDIV1, reg_clkdiv); | 
|  | cx24117_writereg(state, (state->demod == 0) ? | 
|  | CX24117_REG_RATEDIV0 : CX24117_REG_RATEDIV1, reg_ratediv); | 
|  |  | 
|  | cmd.args[15] = CX24117_PNE; | 
|  | cmd.len = 16; | 
|  |  | 
|  | do { | 
|  | /* Reset status register */ | 
|  | status = cx24117_readreg(state, (state->demod == 0) ? | 
|  | CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1) & | 
|  | CX24117_SIGNAL_MASK; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d status_setfe = %02x\n", | 
|  | __func__, state->demod, status); | 
|  |  | 
|  | cx24117_writereg(state, (state->demod == 0) ? | 
|  | CX24117_REG_SSTATUS0 : CX24117_REG_SSTATUS1, status); | 
|  |  | 
|  | /* Tune */ | 
|  | ret = cx24117_cmd_execute(fe, &cmd); | 
|  | if (ret != 0) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Wait for up to 500 ms before retrying | 
|  | * | 
|  | * If we are able to tune then generally it occurs within 100ms. | 
|  | * If it takes longer, try a different rolloff setting. | 
|  | */ | 
|  | for (i = 0; i < 50; i++) { | 
|  | cx24117_read_status(fe, &tunerstat); | 
|  | status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); | 
|  | if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { | 
|  | dev_dbg(&state->priv->i2c->dev, | 
|  | "%s() demod%d tuned\n", | 
|  | __func__, state->demod); | 
|  | return 0; | 
|  | } | 
|  | msleep(20); | 
|  | } | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d not tuned\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | /* try next rolloff value */ | 
|  | if (state->dcur.rolloff == 3) | 
|  | cmd.args[11]--; | 
|  |  | 
|  | } while (--retune); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int cx24117_tune(struct dvb_frontend *fe, bool re_tune, | 
|  | unsigned int mode_flags, unsigned int *delay, enum fe_status *status) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  |  | 
|  | dev_dbg(&state->priv->i2c->dev, "%s() demod%d\n", | 
|  | __func__, state->demod); | 
|  |  | 
|  | *delay = HZ / 5; | 
|  | if (re_tune) { | 
|  | int ret = cx24117_set_frontend(fe); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  | return cx24117_read_status(fe, status); | 
|  | } | 
|  |  | 
|  | static int cx24117_get_algo(struct dvb_frontend *fe) | 
|  | { | 
|  | return DVBFE_ALGO_HW; | 
|  | } | 
|  |  | 
|  | static int cx24117_get_frontend(struct dvb_frontend *fe) | 
|  | { | 
|  | struct cx24117_state *state = fe->demodulator_priv; | 
|  | struct dtv_frontend_properties *c = &fe->dtv_property_cache; | 
|  | struct cx24117_cmd cmd; | 
|  | u8 reg, st, inv; | 
|  | int ret, idx; | 
|  | unsigned int freq; | 
|  | short srate_os, freq_os; | 
|  |  | 
|  | u8 buf[0x1f-4]; | 
|  |  | 
|  | /* Read current tune parameters */ | 
|  | cmd.args[0] = CMD_GETCTLACC; | 
|  | cmd.args[1] = (u8) state->demod; | 
|  | cmd.len = 2; | 
|  | ret = cx24117_cmd_execute(fe, &cmd); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | /* read all required regs at once */ | 
|  | reg = (state->demod == 0) ? CX24117_REG_FREQ3_0 : CX24117_REG_FREQ3_1; | 
|  | ret = cx24117_readregN(state, reg, buf, 0x1f-4); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | st = buf[5]; | 
|  |  | 
|  | /* get spectral inversion */ | 
|  | inv = (((state->demod == 0) ? ~st : st) >> 6) & 1; | 
|  | if (inv == 0) | 
|  | c->inversion = INVERSION_OFF; | 
|  | else | 
|  | c->inversion = INVERSION_ON; | 
|  |  | 
|  | /* modulation and fec */ | 
|  | idx = st & 0x3f; | 
|  | if (c->delivery_system == SYS_DVBS2) { | 
|  | if (idx > 11) | 
|  | idx += 9; | 
|  | else | 
|  | idx += 7; | 
|  | } | 
|  |  | 
|  | c->modulation = cx24117_modfec_modes[idx].modulation; | 
|  | c->fec_inner = cx24117_modfec_modes[idx].fec; | 
|  |  | 
|  | /* frequency */ | 
|  | freq = (buf[0] << 16) | (buf[1] << 8) | buf[2]; | 
|  | freq_os = (buf[8] << 8) | buf[9]; | 
|  | c->frequency = freq + freq_os; | 
|  |  | 
|  | /* symbol rate */ | 
|  | srate_os = (buf[10] << 8) | buf[11]; | 
|  | c->symbol_rate = -1000 * srate_os + state->dcur.symbol_rate; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct dvb_frontend_ops cx24117_ops = { | 
|  | .delsys = { SYS_DVBS, SYS_DVBS2 }, | 
|  | .info = { | 
|  | .name = "Conexant CX24117/CX24132", | 
|  | .frequency_min = 950000, | 
|  | .frequency_max = 2150000, | 
|  | .frequency_stepsize = 1011, /* kHz for QPSK frontends */ | 
|  | .frequency_tolerance = 5000, | 
|  | .symbol_rate_min = 1000000, | 
|  | .symbol_rate_max = 45000000, | 
|  | .caps = FE_CAN_INVERSION_AUTO | | 
|  | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | | 
|  | FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | | 
|  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | | 
|  | FE_CAN_2G_MODULATION | | 
|  | FE_CAN_QPSK | FE_CAN_RECOVER | 
|  | }, | 
|  |  | 
|  | .release = cx24117_release, | 
|  |  | 
|  | .init = cx24117_initfe, | 
|  | .sleep = cx24117_sleep, | 
|  | .read_status = cx24117_read_status, | 
|  | .read_ber = cx24117_read_ber, | 
|  | .read_signal_strength = cx24117_read_signal_strength, | 
|  | .read_snr = cx24117_read_snr, | 
|  | .read_ucblocks = cx24117_read_ucblocks, | 
|  | .set_tone = cx24117_set_tone, | 
|  | .set_voltage = cx24117_set_voltage, | 
|  | .diseqc_send_master_cmd = cx24117_send_diseqc_msg, | 
|  | .diseqc_send_burst = cx24117_diseqc_send_burst, | 
|  | .get_frontend_algo = cx24117_get_algo, | 
|  | .tune = cx24117_tune, | 
|  |  | 
|  | .set_frontend = cx24117_set_frontend, | 
|  | .get_frontend = cx24117_get_frontend, | 
|  | }; | 
|  |  | 
|  |  | 
|  | MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24117/cx24132 hardware"); | 
|  | MODULE_AUTHOR("Luis Alves (ljalvs@gmail.com)"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION("1.1"); | 
|  | MODULE_FIRMWARE(CX24117_DEFAULT_FIRMWARE); | 
|  |  |