|  | /* | 
|  | * Atheros CARL9170 driver | 
|  | * | 
|  | * mac80211 interaction code | 
|  | * | 
|  | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; see the file COPYING.  If not, see | 
|  | * http://www.gnu.org/licenses/. | 
|  | * | 
|  | * This file incorporates work covered by the following copyright and | 
|  | * permission notice: | 
|  | *    Copyright (c) 2007-2008 Atheros Communications, Inc. | 
|  | * | 
|  | *    Permission to use, copy, modify, and/or distribute this software for any | 
|  | *    purpose with or without fee is hereby granted, provided that the above | 
|  | *    copyright notice and this permission notice appear in all copies. | 
|  | * | 
|  | *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
|  | *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
|  | *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | 
|  | *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
|  | *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/random.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include "hw.h" | 
|  | #include "carl9170.h" | 
|  | #include "cmd.h" | 
|  |  | 
|  | static bool modparam_nohwcrypt; | 
|  | module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); | 
|  | MODULE_PARM_DESC(nohwcrypt, "Disable hardware crypto offload."); | 
|  |  | 
|  | int modparam_noht; | 
|  | module_param_named(noht, modparam_noht, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(noht, "Disable MPDU aggregation."); | 
|  |  | 
|  | #define RATE(_bitrate, _hw_rate, _txpidx, _flags) {	\ | 
|  | .bitrate	= (_bitrate),			\ | 
|  | .flags		= (_flags),			\ | 
|  | .hw_value	= (_hw_rate) | (_txpidx) << 4,	\ | 
|  | } | 
|  |  | 
|  | struct ieee80211_rate __carl9170_ratetable[] = { | 
|  | RATE(10, 0, 0, 0), | 
|  | RATE(20, 1, 1, IEEE80211_RATE_SHORT_PREAMBLE), | 
|  | RATE(55, 2, 2, IEEE80211_RATE_SHORT_PREAMBLE), | 
|  | RATE(110, 3, 3, IEEE80211_RATE_SHORT_PREAMBLE), | 
|  | RATE(60, 0xb, 0, 0), | 
|  | RATE(90, 0xf, 0, 0), | 
|  | RATE(120, 0xa, 0, 0), | 
|  | RATE(180, 0xe, 0, 0), | 
|  | RATE(240, 0x9, 0, 0), | 
|  | RATE(360, 0xd, 1, 0), | 
|  | RATE(480, 0x8, 2, 0), | 
|  | RATE(540, 0xc, 3, 0), | 
|  | }; | 
|  | #undef RATE | 
|  |  | 
|  | #define carl9170_g_ratetable	(__carl9170_ratetable + 0) | 
|  | #define carl9170_g_ratetable_size	12 | 
|  | #define carl9170_a_ratetable	(__carl9170_ratetable + 4) | 
|  | #define carl9170_a_ratetable_size	8 | 
|  |  | 
|  | /* | 
|  | * NB: The hw_value is used as an index into the carl9170_phy_freq_params | 
|  | *     array in phy.c so that we don't have to do frequency lookups! | 
|  | */ | 
|  | #define CHAN(_freq, _idx) {		\ | 
|  | .center_freq	= (_freq),	\ | 
|  | .hw_value	= (_idx),	\ | 
|  | .max_power	= 18, /* XXX */	\ | 
|  | } | 
|  |  | 
|  | static struct ieee80211_channel carl9170_2ghz_chantable[] = { | 
|  | CHAN(2412,  0), | 
|  | CHAN(2417,  1), | 
|  | CHAN(2422,  2), | 
|  | CHAN(2427,  3), | 
|  | CHAN(2432,  4), | 
|  | CHAN(2437,  5), | 
|  | CHAN(2442,  6), | 
|  | CHAN(2447,  7), | 
|  | CHAN(2452,  8), | 
|  | CHAN(2457,  9), | 
|  | CHAN(2462, 10), | 
|  | CHAN(2467, 11), | 
|  | CHAN(2472, 12), | 
|  | CHAN(2484, 13), | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_channel carl9170_5ghz_chantable[] = { | 
|  | CHAN(4920, 14), | 
|  | CHAN(4940, 15), | 
|  | CHAN(4960, 16), | 
|  | CHAN(4980, 17), | 
|  | CHAN(5040, 18), | 
|  | CHAN(5060, 19), | 
|  | CHAN(5080, 20), | 
|  | CHAN(5180, 21), | 
|  | CHAN(5200, 22), | 
|  | CHAN(5220, 23), | 
|  | CHAN(5240, 24), | 
|  | CHAN(5260, 25), | 
|  | CHAN(5280, 26), | 
|  | CHAN(5300, 27), | 
|  | CHAN(5320, 28), | 
|  | CHAN(5500, 29), | 
|  | CHAN(5520, 30), | 
|  | CHAN(5540, 31), | 
|  | CHAN(5560, 32), | 
|  | CHAN(5580, 33), | 
|  | CHAN(5600, 34), | 
|  | CHAN(5620, 35), | 
|  | CHAN(5640, 36), | 
|  | CHAN(5660, 37), | 
|  | CHAN(5680, 38), | 
|  | CHAN(5700, 39), | 
|  | CHAN(5745, 40), | 
|  | CHAN(5765, 41), | 
|  | CHAN(5785, 42), | 
|  | CHAN(5805, 43), | 
|  | CHAN(5825, 44), | 
|  | CHAN(5170, 45), | 
|  | CHAN(5190, 46), | 
|  | CHAN(5210, 47), | 
|  | CHAN(5230, 48), | 
|  | }; | 
|  | #undef CHAN | 
|  |  | 
|  | #define CARL9170_HT_CAP							\ | 
|  | {									\ | 
|  | .ht_supported	= true,						\ | 
|  | .cap		= IEEE80211_HT_CAP_MAX_AMSDU |			\ | 
|  | IEEE80211_HT_CAP_SUP_WIDTH_20_40 |		\ | 
|  | IEEE80211_HT_CAP_SGI_40 |			\ | 
|  | IEEE80211_HT_CAP_DSSSCCK40 |			\ | 
|  | IEEE80211_HT_CAP_SM_PS,			\ | 
|  | .ampdu_factor	= IEEE80211_HT_MAX_AMPDU_64K,			\ | 
|  | .ampdu_density	= IEEE80211_HT_MPDU_DENSITY_8,			\ | 
|  | .mcs		= {						\ | 
|  | .rx_mask = { 0xff, 0xff, 0, 0, 0x1, 0, 0, 0, 0, 0, },	\ | 
|  | .rx_highest = cpu_to_le16(300),				\ | 
|  | .tx_params = IEEE80211_HT_MCS_TX_DEFINED,		\ | 
|  | },								\ | 
|  | } | 
|  |  | 
|  | static struct ieee80211_supported_band carl9170_band_2GHz = { | 
|  | .channels	= carl9170_2ghz_chantable, | 
|  | .n_channels	= ARRAY_SIZE(carl9170_2ghz_chantable), | 
|  | .bitrates	= carl9170_g_ratetable, | 
|  | .n_bitrates	= carl9170_g_ratetable_size, | 
|  | .ht_cap		= CARL9170_HT_CAP, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_supported_band carl9170_band_5GHz = { | 
|  | .channels	= carl9170_5ghz_chantable, | 
|  | .n_channels	= ARRAY_SIZE(carl9170_5ghz_chantable), | 
|  | .bitrates	= carl9170_a_ratetable, | 
|  | .n_bitrates	= carl9170_a_ratetable_size, | 
|  | .ht_cap		= CARL9170_HT_CAP, | 
|  | }; | 
|  |  | 
|  | static void carl9170_ampdu_gc(struct ar9170 *ar) | 
|  | { | 
|  | struct carl9170_sta_tid *tid_info; | 
|  | LIST_HEAD(tid_gc); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(tid_info, &ar->tx_ampdu_list, list) { | 
|  | spin_lock_bh(&ar->tx_ampdu_list_lock); | 
|  | if (tid_info->state == CARL9170_TID_STATE_SHUTDOWN) { | 
|  | tid_info->state = CARL9170_TID_STATE_KILLED; | 
|  | list_del_rcu(&tid_info->list); | 
|  | ar->tx_ampdu_list_len--; | 
|  | list_add_tail(&tid_info->tmp_list, &tid_gc); | 
|  | } | 
|  | spin_unlock_bh(&ar->tx_ampdu_list_lock); | 
|  |  | 
|  | } | 
|  | rcu_assign_pointer(ar->tx_ampdu_iter, tid_info); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | synchronize_rcu(); | 
|  |  | 
|  | while (!list_empty(&tid_gc)) { | 
|  | struct sk_buff *skb; | 
|  | tid_info = list_first_entry(&tid_gc, struct carl9170_sta_tid, | 
|  | tmp_list); | 
|  |  | 
|  | while ((skb = __skb_dequeue(&tid_info->queue))) | 
|  | carl9170_tx_status(ar, skb, false); | 
|  |  | 
|  | list_del_init(&tid_info->tmp_list); | 
|  | kfree(tid_info); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void carl9170_flush(struct ar9170 *ar, bool drop_queued) | 
|  | { | 
|  | if (drop_queued) { | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * We can only drop frames which have not been uploaded | 
|  | * to the device yet. | 
|  | */ | 
|  |  | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | while ((skb = skb_dequeue(&ar->tx_pending[i]))) { | 
|  | struct ieee80211_tx_info *info; | 
|  |  | 
|  | info = IEEE80211_SKB_CB(skb); | 
|  | if (info->flags & IEEE80211_TX_CTL_AMPDU) | 
|  | atomic_dec(&ar->tx_ampdu_upload); | 
|  |  | 
|  | carl9170_tx_status(ar, skb, false); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Wait for all other outstanding frames to timeout. */ | 
|  | if (atomic_read(&ar->tx_total_queued)) | 
|  | WARN_ON(wait_for_completion_timeout(&ar->tx_flush, HZ) == 0); | 
|  | } | 
|  |  | 
|  | static void carl9170_flush_ba(struct ar9170 *ar) | 
|  | { | 
|  | struct sk_buff_head free; | 
|  | struct carl9170_sta_tid *tid_info; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | __skb_queue_head_init(&free); | 
|  |  | 
|  | rcu_read_lock(); | 
|  | spin_lock_bh(&ar->tx_ampdu_list_lock); | 
|  | list_for_each_entry_rcu(tid_info, &ar->tx_ampdu_list, list) { | 
|  | if (tid_info->state > CARL9170_TID_STATE_SUSPEND) { | 
|  | tid_info->state = CARL9170_TID_STATE_SUSPEND; | 
|  |  | 
|  | spin_lock(&tid_info->lock); | 
|  | while ((skb = __skb_dequeue(&tid_info->queue))) | 
|  | __skb_queue_tail(&free, skb); | 
|  | spin_unlock(&tid_info->lock); | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&ar->tx_ampdu_list_lock); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | while ((skb = __skb_dequeue(&free))) | 
|  | carl9170_tx_status(ar, skb, false); | 
|  | } | 
|  |  | 
|  | static void carl9170_zap_queues(struct ar9170 *ar) | 
|  | { | 
|  | struct carl9170_vif_info *cvif; | 
|  | unsigned int i; | 
|  |  | 
|  | carl9170_ampdu_gc(ar); | 
|  |  | 
|  | carl9170_flush_ba(ar); | 
|  | carl9170_flush(ar, true); | 
|  |  | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | spin_lock_bh(&ar->tx_status[i].lock); | 
|  | while (!skb_queue_empty(&ar->tx_status[i])) { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = skb_peek(&ar->tx_status[i]); | 
|  | carl9170_tx_get_skb(skb); | 
|  | spin_unlock_bh(&ar->tx_status[i].lock); | 
|  | carl9170_tx_drop(ar, skb); | 
|  | spin_lock_bh(&ar->tx_status[i].lock); | 
|  | carl9170_tx_put_skb(skb); | 
|  | } | 
|  | spin_unlock_bh(&ar->tx_status[i].lock); | 
|  | } | 
|  |  | 
|  | BUILD_BUG_ON(CARL9170_NUM_TX_LIMIT_SOFT < 1); | 
|  | BUILD_BUG_ON(CARL9170_NUM_TX_LIMIT_HARD < CARL9170_NUM_TX_LIMIT_SOFT); | 
|  | BUILD_BUG_ON(CARL9170_NUM_TX_LIMIT_HARD >= CARL9170_BAW_BITS); | 
|  |  | 
|  | /* reinitialize queues statistics */ | 
|  | memset(&ar->tx_stats, 0, sizeof(ar->tx_stats)); | 
|  | for (i = 0; i < ar->hw->queues; i++) | 
|  | ar->tx_stats[i].limit = CARL9170_NUM_TX_LIMIT_HARD; | 
|  |  | 
|  | for (i = 0; i < DIV_ROUND_UP(ar->fw.mem_blocks, BITS_PER_LONG); i++) | 
|  | ar->mem_bitmap[i] = 0; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(cvif, &ar->vif_list, list) { | 
|  | spin_lock_bh(&ar->beacon_lock); | 
|  | dev_kfree_skb_any(cvif->beacon); | 
|  | cvif->beacon = NULL; | 
|  | spin_unlock_bh(&ar->beacon_lock); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | atomic_set(&ar->tx_ampdu_upload, 0); | 
|  | atomic_set(&ar->tx_ampdu_scheduler, 0); | 
|  | atomic_set(&ar->tx_total_pending, 0); | 
|  | atomic_set(&ar->tx_total_queued, 0); | 
|  | atomic_set(&ar->mem_free_blocks, ar->fw.mem_blocks); | 
|  | } | 
|  |  | 
|  | #define CARL9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop)		\ | 
|  | do {									\ | 
|  | queue.aifs = ai_fs;						\ | 
|  | queue.cw_min = cwmin;						\ | 
|  | queue.cw_max = cwmax;						\ | 
|  | queue.txop = _txop;						\ | 
|  | } while (0) | 
|  |  | 
|  | static int carl9170_op_start(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | int err, i; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  |  | 
|  | carl9170_zap_queues(ar); | 
|  |  | 
|  | /* reset QoS defaults */ | 
|  | CARL9170_FILL_QUEUE(ar->edcf[AR9170_TXQ_VO], 2, 3,     7, 47); | 
|  | CARL9170_FILL_QUEUE(ar->edcf[AR9170_TXQ_VI], 2, 7,    15, 94); | 
|  | CARL9170_FILL_QUEUE(ar->edcf[AR9170_TXQ_BE], 3, 15, 1023,  0); | 
|  | CARL9170_FILL_QUEUE(ar->edcf[AR9170_TXQ_BK], 7, 15, 1023,  0); | 
|  | CARL9170_FILL_QUEUE(ar->edcf[AR9170_TXQ_SPECIAL], 2, 3, 7, 0); | 
|  |  | 
|  | ar->current_factor = ar->current_density = -1; | 
|  | /* "The first key is unique." */ | 
|  | ar->usedkeys = 1; | 
|  | ar->filter_state = 0; | 
|  | ar->ps.last_action = jiffies; | 
|  | ar->ps.last_slept = jiffies; | 
|  | ar->erp_mode = CARL9170_ERP_AUTO; | 
|  |  | 
|  | /* Set "disable hw crypto offload" whenever the module parameter | 
|  | * nohwcrypt is true or if the firmware does not support it. | 
|  | */ | 
|  | ar->disable_offload = modparam_nohwcrypt | | 
|  | ar->fw.disable_offload_fw; | 
|  | ar->rx_software_decryption = ar->disable_offload; | 
|  |  | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | ar->queue_stop_timeout[i] = jiffies; | 
|  | ar->max_queue_stop_timeout[i] = 0; | 
|  | } | 
|  |  | 
|  | atomic_set(&ar->mem_allocs, 0); | 
|  |  | 
|  | err = carl9170_usb_open(ar); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_init_mac(ar); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_set_qos(ar); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | if (ar->fw.rx_filter) { | 
|  | err = carl9170_rx_filter(ar, CARL9170_RX_FILTER_OTHER_RA | | 
|  | CARL9170_RX_FILTER_CTL_OTHER | CARL9170_RX_FILTER_BAD); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = carl9170_write_reg(ar, AR9170_MAC_REG_DMA_TRIGGER, | 
|  | AR9170_DMA_TRIGGER_RXQ); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | /* Clear key-cache */ | 
|  | for (i = 0; i < AR9170_CAM_MAX_USER + 4; i++) { | 
|  | err = carl9170_upload_key(ar, i, NULL, AR9170_ENC_ALG_NONE, | 
|  | 0, NULL, 0); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_upload_key(ar, i, NULL, AR9170_ENC_ALG_NONE, | 
|  | 1, NULL, 0); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | if (i < AR9170_CAM_MAX_USER) { | 
|  | err = carl9170_disable_key(ar, i); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STARTED); | 
|  |  | 
|  | ieee80211_queue_delayed_work(ar->hw, &ar->stat_work, | 
|  | round_jiffies(msecs_to_jiffies(CARL9170_STAT_WORK))); | 
|  |  | 
|  | ieee80211_wake_queues(ar->hw); | 
|  | err = 0; | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ar->mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void carl9170_cancel_worker(struct ar9170 *ar) | 
|  | { | 
|  | cancel_delayed_work_sync(&ar->stat_work); | 
|  | cancel_delayed_work_sync(&ar->tx_janitor); | 
|  | #ifdef CONFIG_CARL9170_LEDS | 
|  | cancel_delayed_work_sync(&ar->led_work); | 
|  | #endif /* CONFIG_CARL9170_LEDS */ | 
|  | cancel_work_sync(&ar->ps_work); | 
|  | cancel_work_sync(&ar->ping_work); | 
|  | cancel_work_sync(&ar->ampdu_work); | 
|  | } | 
|  |  | 
|  | static void carl9170_op_stop(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  |  | 
|  | carl9170_set_state_when(ar, CARL9170_STARTED, CARL9170_IDLE); | 
|  |  | 
|  | ieee80211_stop_queues(ar->hw); | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | if (IS_ACCEPTING_CMD(ar)) { | 
|  | RCU_INIT_POINTER(ar->beacon_iter, NULL); | 
|  |  | 
|  | carl9170_led_set_state(ar, 0); | 
|  |  | 
|  | /* stop DMA */ | 
|  | carl9170_write_reg(ar, AR9170_MAC_REG_DMA_TRIGGER, 0); | 
|  | carl9170_usb_stop(ar); | 
|  | } | 
|  |  | 
|  | carl9170_zap_queues(ar); | 
|  | mutex_unlock(&ar->mutex); | 
|  |  | 
|  | carl9170_cancel_worker(ar); | 
|  | } | 
|  |  | 
|  | static void carl9170_restart_work(struct work_struct *work) | 
|  | { | 
|  | struct ar9170 *ar = container_of(work, struct ar9170, | 
|  | restart_work); | 
|  | int err = -EIO; | 
|  |  | 
|  | ar->usedkeys = 0; | 
|  | ar->filter_state = 0; | 
|  | carl9170_cancel_worker(ar); | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | if (!ar->force_usb_reset) { | 
|  | err = carl9170_usb_restart(ar); | 
|  | if (net_ratelimit()) { | 
|  | if (err) | 
|  | dev_err(&ar->udev->dev, "Failed to restart device (%d).\n", err); | 
|  | else | 
|  | dev_info(&ar->udev->dev, "device restarted successfully.\n"); | 
|  | } | 
|  | } | 
|  | carl9170_zap_queues(ar); | 
|  | mutex_unlock(&ar->mutex); | 
|  |  | 
|  | if (!err && !ar->force_usb_reset) { | 
|  | ar->restart_counter++; | 
|  | atomic_set(&ar->pending_restarts, 0); | 
|  |  | 
|  | ieee80211_restart_hw(ar->hw); | 
|  | } else { | 
|  | /* | 
|  | * The reset was unsuccessful and the device seems to | 
|  | * be dead. But there's still one option: a low-level | 
|  | * usb subsystem reset... | 
|  | */ | 
|  |  | 
|  | carl9170_usb_reset(ar); | 
|  | } | 
|  | } | 
|  |  | 
|  | void carl9170_restart(struct ar9170 *ar, const enum carl9170_restart_reasons r) | 
|  | { | 
|  | carl9170_set_state_when(ar, CARL9170_STARTED, CARL9170_IDLE); | 
|  |  | 
|  | /* | 
|  | * Sometimes, an error can trigger several different reset events. | 
|  | * By ignoring these *surplus* reset events, the device won't be | 
|  | * killed again, right after it has recovered. | 
|  | */ | 
|  | if (atomic_inc_return(&ar->pending_restarts) > 1) { | 
|  | dev_dbg(&ar->udev->dev, "ignoring restart (%d)\n", r); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_stop_queues(ar->hw); | 
|  |  | 
|  | dev_err(&ar->udev->dev, "restart device (%d)\n", r); | 
|  |  | 
|  | if (!WARN_ON(r == CARL9170_RR_NO_REASON) || | 
|  | !WARN_ON(r >= __CARL9170_RR_LAST)) | 
|  | ar->last_reason = r; | 
|  |  | 
|  | if (!ar->registered) | 
|  | return; | 
|  |  | 
|  | if (!IS_ACCEPTING_CMD(ar) || ar->needs_full_reset) | 
|  | ar->force_usb_reset = true; | 
|  |  | 
|  | ieee80211_queue_work(ar->hw, &ar->restart_work); | 
|  |  | 
|  | /* | 
|  | * At this point, the device instance might have vanished/disabled. | 
|  | * So, don't put any code which access the ar9170 struct | 
|  | * without proper protection. | 
|  | */ | 
|  | } | 
|  |  | 
|  | static void carl9170_ping_work(struct work_struct *work) | 
|  | { | 
|  | struct ar9170 *ar = container_of(work, struct ar9170, ping_work); | 
|  | int err; | 
|  |  | 
|  | if (!IS_STARTED(ar)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | err = carl9170_echo_test(ar, 0xdeadbeef); | 
|  | if (err) | 
|  | carl9170_restart(ar, CARL9170_RR_UNRESPONSIVE_DEVICE); | 
|  | mutex_unlock(&ar->mutex); | 
|  | } | 
|  |  | 
|  | static int carl9170_init_interface(struct ar9170 *ar, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath_common *common = &ar->common; | 
|  | int err; | 
|  |  | 
|  | if (!vif) { | 
|  | WARN_ON_ONCE(IS_STARTED(ar)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | memcpy(common->macaddr, vif->addr, ETH_ALEN); | 
|  |  | 
|  | /* We have to fall back to software crypto, whenever | 
|  | * the user choose to participates in an IBSS. HW | 
|  | * offload for IBSS RSN is not supported by this driver. | 
|  | * | 
|  | * NOTE: If the previous main interface has already | 
|  | * disabled hw crypto offload, we have to keep this | 
|  | * previous disable_offload setting as it was. | 
|  | * Altough ideally, we should notify mac80211 and tell | 
|  | * it to forget about any HW crypto offload for now. | 
|  | */ | 
|  | ar->disable_offload |= ((vif->type != NL80211_IFTYPE_STATION) && | 
|  | (vif->type != NL80211_IFTYPE_AP)); | 
|  |  | 
|  | /* While the driver supports HW offload in a single | 
|  | * P2P client configuration, it doesn't support HW | 
|  | * offload in the favourit, concurrent P2P GO+CLIENT | 
|  | * configuration. Hence, HW offload will always be | 
|  | * disabled for P2P. | 
|  | */ | 
|  | ar->disable_offload |= vif->p2p; | 
|  |  | 
|  | ar->rx_software_decryption = ar->disable_offload; | 
|  |  | 
|  | err = carl9170_set_operating_mode(ar); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int carl9170_op_add_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct carl9170_vif_info *vif_priv = (void *) vif->drv_priv; | 
|  | struct ieee80211_vif *main_vif, *old_main = NULL; | 
|  | struct ar9170 *ar = hw->priv; | 
|  | int vif_id = -1, err = 0; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | rcu_read_lock(); | 
|  | if (vif_priv->active) { | 
|  | /* | 
|  | * Skip the interface structure initialization, | 
|  | * if the vif survived the _restart call. | 
|  | */ | 
|  | vif_id = vif_priv->id; | 
|  | vif_priv->enable_beacon = false; | 
|  |  | 
|  | spin_lock_bh(&ar->beacon_lock); | 
|  | dev_kfree_skb_any(vif_priv->beacon); | 
|  | vif_priv->beacon = NULL; | 
|  | spin_unlock_bh(&ar->beacon_lock); | 
|  |  | 
|  | goto init; | 
|  | } | 
|  |  | 
|  | /* Because the AR9170 HW's MAC doesn't provide full support for | 
|  | * multiple, independent interfaces [of different operation modes]. | 
|  | * We have to select ONE main interface [main mode of HW], but we | 
|  | * can have multiple slaves [AKA: entry in the ACK-table]. | 
|  | * | 
|  | * The first (from HEAD/TOP) interface in the ar->vif_list is | 
|  | * always the main intf. All following intfs in this list | 
|  | * are considered to be slave intfs. | 
|  | */ | 
|  | main_vif = carl9170_get_main_vif(ar); | 
|  |  | 
|  | if (main_vif) { | 
|  | switch (main_vif->type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (vif->type == NL80211_IFTYPE_STATION) | 
|  | break; | 
|  |  | 
|  | /* P2P GO [master] use-case | 
|  | * Because the P2P GO station is selected dynamically | 
|  | * by all participating peers of a WIFI Direct network, | 
|  | * the driver has be able to change the main interface | 
|  | * operating mode on the fly. | 
|  | */ | 
|  | if (main_vif->p2p && vif->p2p && | 
|  | vif->type == NL80211_IFTYPE_AP) { | 
|  | old_main = main_vif; | 
|  | break; | 
|  | } | 
|  |  | 
|  | err = -EBUSY; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | goto unlock; | 
|  |  | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | case NL80211_IFTYPE_AP: | 
|  | if ((vif->type == NL80211_IFTYPE_STATION) || | 
|  | (vif->type == NL80211_IFTYPE_WDS) || | 
|  | (vif->type == NL80211_IFTYPE_AP) || | 
|  | (vif->type == NL80211_IFTYPE_MESH_POINT)) | 
|  | break; | 
|  |  | 
|  | err = -EBUSY; | 
|  | rcu_read_unlock(); | 
|  | goto unlock; | 
|  |  | 
|  | default: | 
|  | rcu_read_unlock(); | 
|  | goto unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | vif_id = bitmap_find_free_region(&ar->vif_bitmap, ar->fw.vif_num, 0); | 
|  |  | 
|  | if (vif_id < 0) { | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | err = -ENOSPC; | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | BUG_ON(ar->vif_priv[vif_id].id != vif_id); | 
|  |  | 
|  | vif_priv->active = true; | 
|  | vif_priv->id = vif_id; | 
|  | vif_priv->enable_beacon = false; | 
|  | ar->vifs++; | 
|  | if (old_main) { | 
|  | /* We end up in here, if the main interface is being replaced. | 
|  | * Put the new main interface at the HEAD of the list and the | 
|  | * previous inteface will automatically become second in line. | 
|  | */ | 
|  | list_add_rcu(&vif_priv->list, &ar->vif_list); | 
|  | } else { | 
|  | /* Add new inteface. If the list is empty, it will become the | 
|  | * main inteface, otherwise it will be slave. | 
|  | */ | 
|  | list_add_tail_rcu(&vif_priv->list, &ar->vif_list); | 
|  | } | 
|  | rcu_assign_pointer(ar->vif_priv[vif_id].vif, vif); | 
|  |  | 
|  | init: | 
|  | main_vif = carl9170_get_main_vif(ar); | 
|  |  | 
|  | if (main_vif == vif) { | 
|  | rcu_assign_pointer(ar->beacon_iter, vif_priv); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (old_main) { | 
|  | struct carl9170_vif_info *old_main_priv = | 
|  | (void *) old_main->drv_priv; | 
|  | /* downgrade old main intf to slave intf. | 
|  | * NOTE: We are no longer under rcu_read_lock. | 
|  | * But we are still holding ar->mutex, so the | 
|  | * vif data [id, addr] is safe. | 
|  | */ | 
|  | err = carl9170_mod_virtual_mac(ar, old_main_priv->id, | 
|  | old_main->addr); | 
|  | if (err) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | err = carl9170_init_interface(ar, vif); | 
|  | if (err) | 
|  | goto unlock; | 
|  | } else { | 
|  | rcu_read_unlock(); | 
|  | err = carl9170_mod_virtual_mac(ar, vif_id, vif->addr); | 
|  |  | 
|  | if (err) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (ar->fw.tx_seq_table) { | 
|  | err = carl9170_write_reg(ar, ar->fw.tx_seq_table + vif_id * 4, | 
|  | 0); | 
|  | if (err) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | if (err && (vif_id >= 0)) { | 
|  | vif_priv->active = false; | 
|  | bitmap_release_region(&ar->vif_bitmap, vif_id, 0); | 
|  | ar->vifs--; | 
|  | RCU_INIT_POINTER(ar->vif_priv[vif_id].vif, NULL); | 
|  | list_del_rcu(&vif_priv->list); | 
|  | mutex_unlock(&ar->mutex); | 
|  | synchronize_rcu(); | 
|  | } else { | 
|  | if (ar->vifs > 1) | 
|  | ar->ps.off_override |= PS_OFF_VIF; | 
|  |  | 
|  | mutex_unlock(&ar->mutex); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void carl9170_op_remove_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct carl9170_vif_info *vif_priv = (void *) vif->drv_priv; | 
|  | struct ieee80211_vif *main_vif; | 
|  | struct ar9170 *ar = hw->priv; | 
|  | unsigned int id; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  |  | 
|  | if (WARN_ON_ONCE(!vif_priv->active)) | 
|  | goto unlock; | 
|  |  | 
|  | ar->vifs--; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | main_vif = carl9170_get_main_vif(ar); | 
|  |  | 
|  | id = vif_priv->id; | 
|  |  | 
|  | vif_priv->active = false; | 
|  | WARN_ON(vif_priv->enable_beacon); | 
|  | vif_priv->enable_beacon = false; | 
|  | list_del_rcu(&vif_priv->list); | 
|  | RCU_INIT_POINTER(ar->vif_priv[id].vif, NULL); | 
|  |  | 
|  | if (vif == main_vif) { | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (ar->vifs) { | 
|  | WARN_ON(carl9170_init_interface(ar, | 
|  | carl9170_get_main_vif(ar))); | 
|  | } else { | 
|  | carl9170_set_operating_mode(ar); | 
|  | } | 
|  | } else { | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | WARN_ON(carl9170_mod_virtual_mac(ar, id, NULL)); | 
|  | } | 
|  |  | 
|  | carl9170_update_beacon(ar, false); | 
|  | carl9170_flush_cab(ar, id); | 
|  |  | 
|  | spin_lock_bh(&ar->beacon_lock); | 
|  | dev_kfree_skb_any(vif_priv->beacon); | 
|  | vif_priv->beacon = NULL; | 
|  | spin_unlock_bh(&ar->beacon_lock); | 
|  |  | 
|  | bitmap_release_region(&ar->vif_bitmap, id, 0); | 
|  |  | 
|  | carl9170_set_beacon_timers(ar); | 
|  |  | 
|  | if (ar->vifs == 1) | 
|  | ar->ps.off_override &= ~PS_OFF_VIF; | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&ar->mutex); | 
|  |  | 
|  | synchronize_rcu(); | 
|  | } | 
|  |  | 
|  | void carl9170_ps_check(struct ar9170 *ar) | 
|  | { | 
|  | ieee80211_queue_work(ar->hw, &ar->ps_work); | 
|  | } | 
|  |  | 
|  | /* caller must hold ar->mutex */ | 
|  | static int carl9170_ps_update(struct ar9170 *ar) | 
|  | { | 
|  | bool ps = false; | 
|  | int err = 0; | 
|  |  | 
|  | if (!ar->ps.off_override) | 
|  | ps = (ar->hw->conf.flags & IEEE80211_CONF_PS); | 
|  |  | 
|  | if (ps != ar->ps.state) { | 
|  | err = carl9170_powersave(ar, ps); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (ar->ps.state && !ps) { | 
|  | ar->ps.sleep_ms = jiffies_to_msecs(jiffies - | 
|  | ar->ps.last_action); | 
|  | } | 
|  |  | 
|  | if (ps) | 
|  | ar->ps.last_slept = jiffies; | 
|  |  | 
|  | ar->ps.last_action = jiffies; | 
|  | ar->ps.state = ps; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void carl9170_ps_work(struct work_struct *work) | 
|  | { | 
|  | struct ar9170 *ar = container_of(work, struct ar9170, | 
|  | ps_work); | 
|  | mutex_lock(&ar->mutex); | 
|  | if (IS_STARTED(ar)) | 
|  | WARN_ON_ONCE(carl9170_ps_update(ar) != 0); | 
|  | mutex_unlock(&ar->mutex); | 
|  | } | 
|  |  | 
|  | static int carl9170_update_survey(struct ar9170 *ar, bool flush, bool noise) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (noise) { | 
|  | err = carl9170_get_noisefloor(ar); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (ar->fw.hw_counters) { | 
|  | err = carl9170_collect_tally(ar); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (flush) | 
|  | memset(&ar->tally, 0, sizeof(ar->tally)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void carl9170_stat_work(struct work_struct *work) | 
|  | { | 
|  | struct ar9170 *ar = container_of(work, struct ar9170, stat_work.work); | 
|  | int err; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | err = carl9170_update_survey(ar, false, true); | 
|  | mutex_unlock(&ar->mutex); | 
|  |  | 
|  | if (err) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_delayed_work(ar->hw, &ar->stat_work, | 
|  | round_jiffies(msecs_to_jiffies(CARL9170_STAT_WORK))); | 
|  | } | 
|  |  | 
|  | static int carl9170_op_config(struct ieee80211_hw *hw, u32 changed) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | int err = 0; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { | 
|  | /* TODO */ | 
|  | err = 0; | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_PS) { | 
|  | err = carl9170_ps_update(ar); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_SMPS) { | 
|  | /* TODO */ | 
|  | err = 0; | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { | 
|  | enum nl80211_channel_type channel_type = | 
|  | cfg80211_get_chandef_type(&hw->conf.chandef); | 
|  |  | 
|  | /* adjust slot time for 5 GHz */ | 
|  | err = carl9170_set_slot_time(ar); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_update_survey(ar, true, false); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_set_channel(ar, hw->conf.chandef.chan, | 
|  | channel_type); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_update_survey(ar, false, true); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_set_dyn_sifs_ack(ar); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | err = carl9170_set_rts_cts_rate(ar); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_POWER) { | 
|  | err = carl9170_set_mac_tpc(ar, ar->hw->conf.chandef.chan); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ar->mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static u64 carl9170_op_prepare_multicast(struct ieee80211_hw *hw, | 
|  | struct netdev_hw_addr_list *mc_list) | 
|  | { | 
|  | struct netdev_hw_addr *ha; | 
|  | u64 mchash; | 
|  |  | 
|  | /* always get broadcast frames */ | 
|  | mchash = 1ULL << (0xff >> 2); | 
|  |  | 
|  | netdev_hw_addr_list_for_each(ha, mc_list) | 
|  | mchash |= 1ULL << (ha->addr[5] >> 2); | 
|  |  | 
|  | return mchash; | 
|  | } | 
|  |  | 
|  | static void carl9170_op_configure_filter(struct ieee80211_hw *hw, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *new_flags, | 
|  | u64 multicast) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  |  | 
|  | /* mask supported flags */ | 
|  | *new_flags &= FIF_ALLMULTI | ar->rx_filter_caps; | 
|  |  | 
|  | if (!IS_ACCEPTING_CMD(ar)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  |  | 
|  | ar->filter_state = *new_flags; | 
|  | /* | 
|  | * We can support more by setting the sniffer bit and | 
|  | * then checking the error flags, later. | 
|  | */ | 
|  |  | 
|  | if (*new_flags & FIF_ALLMULTI) | 
|  | multicast = ~0ULL; | 
|  |  | 
|  | if (multicast != ar->cur_mc_hash) | 
|  | WARN_ON(carl9170_update_multicast(ar, multicast)); | 
|  |  | 
|  | if (changed_flags & FIF_OTHER_BSS) { | 
|  | ar->sniffer_enabled = !!(*new_flags & FIF_OTHER_BSS); | 
|  |  | 
|  | WARN_ON(carl9170_set_operating_mode(ar)); | 
|  | } | 
|  |  | 
|  | if (ar->fw.rx_filter && changed_flags & ar->rx_filter_caps) { | 
|  | u32 rx_filter = 0; | 
|  |  | 
|  | if (!ar->fw.ba_filter) | 
|  | rx_filter |= CARL9170_RX_FILTER_CTL_OTHER; | 
|  |  | 
|  | if (!(*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))) | 
|  | rx_filter |= CARL9170_RX_FILTER_BAD; | 
|  |  | 
|  | if (!(*new_flags & FIF_CONTROL)) | 
|  | rx_filter |= CARL9170_RX_FILTER_CTL_OTHER; | 
|  |  | 
|  | if (!(*new_flags & FIF_PSPOLL)) | 
|  | rx_filter |= CARL9170_RX_FILTER_CTL_PSPOLL; | 
|  |  | 
|  | if (!(*new_flags & FIF_OTHER_BSS)) { | 
|  | rx_filter |= CARL9170_RX_FILTER_OTHER_RA; | 
|  | rx_filter |= CARL9170_RX_FILTER_DECRY_FAIL; | 
|  | } | 
|  |  | 
|  | WARN_ON(carl9170_rx_filter(ar, rx_filter)); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->mutex); | 
|  | } | 
|  |  | 
|  |  | 
|  | static void carl9170_op_bss_info_changed(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_bss_conf *bss_conf, | 
|  | u32 changed) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | struct ath_common *common = &ar->common; | 
|  | int err = 0; | 
|  | struct carl9170_vif_info *vif_priv; | 
|  | struct ieee80211_vif *main_vif; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | vif_priv = (void *) vif->drv_priv; | 
|  | main_vif = carl9170_get_main_vif(ar); | 
|  | if (WARN_ON(!main_vif)) | 
|  | goto out; | 
|  |  | 
|  | if (changed & BSS_CHANGED_BEACON_ENABLED) { | 
|  | struct carl9170_vif_info *iter; | 
|  | int i = 0; | 
|  |  | 
|  | vif_priv->enable_beacon = bss_conf->enable_beacon; | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(iter, &ar->vif_list, list) { | 
|  | if (iter->active && iter->enable_beacon) | 
|  | i++; | 
|  |  | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | ar->beacon_enabled = i; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BEACON) { | 
|  | err = carl9170_update_beacon(ar, false); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON | | 
|  | BSS_CHANGED_BEACON_INT)) { | 
|  |  | 
|  | if (main_vif != vif) { | 
|  | bss_conf->beacon_int = main_vif->bss_conf.beacon_int; | 
|  | bss_conf->dtim_period = main_vif->bss_conf.dtim_period; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Therefore a hard limit for the broadcast traffic should | 
|  | * prevent false alarms. | 
|  | */ | 
|  | if (vif->type != NL80211_IFTYPE_STATION && | 
|  | (bss_conf->beacon_int * bss_conf->dtim_period >= | 
|  | (CARL9170_QUEUE_STUCK_TIMEOUT / 2))) { | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = carl9170_set_beacon_timers(ar); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_HT) { | 
|  | /* TODO */ | 
|  | err = 0; | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (main_vif != vif) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * The following settings can only be changed by the | 
|  | * master interface. | 
|  | */ | 
|  |  | 
|  | if (changed & BSS_CHANGED_BSSID) { | 
|  | memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); | 
|  | err = carl9170_set_operating_mode(ar); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ASSOC) { | 
|  | ar->common.curaid = bss_conf->aid; | 
|  | err = carl9170_set_beacon_timers(ar); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_SLOT) { | 
|  | err = carl9170_set_slot_time(ar); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BASIC_RATES) { | 
|  | err = carl9170_set_mac_rates(ar); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | WARN_ON_ONCE(err && IS_STARTED(ar)); | 
|  | mutex_unlock(&ar->mutex); | 
|  | } | 
|  |  | 
|  | static u64 carl9170_op_get_tsf(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | struct carl9170_tsf_rsp tsf; | 
|  | int err; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | err = carl9170_exec_cmd(ar, CARL9170_CMD_READ_TSF, | 
|  | 0, NULL, sizeof(tsf), &tsf); | 
|  | mutex_unlock(&ar->mutex); | 
|  | if (WARN_ON(err)) | 
|  | return 0; | 
|  |  | 
|  | return le64_to_cpu(tsf.tsf_64); | 
|  | } | 
|  |  | 
|  | static int carl9170_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | int err = 0, i; | 
|  | u8 ktype; | 
|  |  | 
|  | if (ar->disable_offload || !vif) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | /* Fall back to software encryption whenever the driver is connected | 
|  | * to more than one network. | 
|  | * | 
|  | * This is very unfortunate, because some machines cannot handle | 
|  | * the high througput speed in 802.11n networks. | 
|  | */ | 
|  |  | 
|  | if (!is_main_vif(ar, vif)) { | 
|  | mutex_lock(&ar->mutex); | 
|  | goto err_softw; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * While the hardware supports *catch-all* key, for offloading | 
|  | * group-key en-/de-cryption. The way of how the hardware | 
|  | * decides which keyId maps to which key, remains a mystery... | 
|  | */ | 
|  | if ((vif->type != NL80211_IFTYPE_STATION && | 
|  | vif->type != NL80211_IFTYPE_ADHOC) && | 
|  | !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | switch (key->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | ktype = AR9170_ENC_ALG_WEP64; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | ktype = AR9170_ENC_ALG_WEP128; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | ktype = AR9170_ENC_ALG_TKIP; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | ktype = AR9170_ENC_ALG_AESCCMP; | 
|  | key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | if (cmd == SET_KEY) { | 
|  | if (!IS_STARTED(ar)) { | 
|  | err = -EOPNOTSUPP; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { | 
|  | sta = NULL; | 
|  |  | 
|  | i = 64 + key->keyidx; | 
|  | } else { | 
|  | for (i = 0; i < 64; i++) | 
|  | if (!(ar->usedkeys & BIT(i))) | 
|  | break; | 
|  | if (i == 64) | 
|  | goto err_softw; | 
|  | } | 
|  |  | 
|  | key->hw_key_idx = i; | 
|  |  | 
|  | err = carl9170_upload_key(ar, i, sta ? sta->addr : NULL, | 
|  | ktype, 0, key->key, | 
|  | min_t(u8, 16, key->keylen)); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | if (key->cipher == WLAN_CIPHER_SUITE_TKIP) { | 
|  | err = carl9170_upload_key(ar, i, sta ? sta->addr : | 
|  | NULL, ktype, 1, | 
|  | key->key + 16, 16); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * hardware is not capable generating MMIC | 
|  | * of fragmented frames! | 
|  | */ | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; | 
|  | } | 
|  |  | 
|  | if (i < 64) | 
|  | ar->usedkeys |= BIT(i); | 
|  |  | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  | } else { | 
|  | if (!IS_STARTED(ar)) { | 
|  | /* The device is gone... together with the key ;-) */ | 
|  | err = 0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (key->hw_key_idx < 64) { | 
|  | ar->usedkeys &= ~BIT(key->hw_key_idx); | 
|  | } else { | 
|  | err = carl9170_upload_key(ar, key->hw_key_idx, NULL, | 
|  | AR9170_ENC_ALG_NONE, 0, | 
|  | NULL, 0); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | if (key->cipher == WLAN_CIPHER_SUITE_TKIP) { | 
|  | err = carl9170_upload_key(ar, key->hw_key_idx, | 
|  | NULL, | 
|  | AR9170_ENC_ALG_NONE, | 
|  | 1, NULL, 0); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | err = carl9170_disable_key(ar, key->hw_key_idx); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ar->mutex); | 
|  | return err; | 
|  |  | 
|  | err_softw: | 
|  | if (!ar->rx_software_decryption) { | 
|  | ar->rx_software_decryption = true; | 
|  | carl9170_set_operating_mode(ar); | 
|  | } | 
|  | mutex_unlock(&ar->mutex); | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | static int carl9170_op_sta_add(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct carl9170_sta_info *sta_info = (void *) sta->drv_priv; | 
|  | unsigned int i; | 
|  |  | 
|  | atomic_set(&sta_info->pending_frames, 0); | 
|  |  | 
|  | if (sta->ht_cap.ht_supported) { | 
|  | if (sta->ht_cap.ampdu_density > 6) { | 
|  | /* | 
|  | * HW does support 16us AMPDU density. | 
|  | * No HT-Xmit for station. | 
|  | */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(sta_info->agg); i++) | 
|  | RCU_INIT_POINTER(sta_info->agg[i], NULL); | 
|  |  | 
|  | sta_info->ampdu_max_len = 1 << (3 + sta->ht_cap.ampdu_factor); | 
|  | sta_info->ht_sta = true; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int carl9170_op_sta_remove(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | struct carl9170_sta_info *sta_info = (void *) sta->drv_priv; | 
|  | unsigned int i; | 
|  | bool cleanup = false; | 
|  |  | 
|  | if (sta->ht_cap.ht_supported) { | 
|  |  | 
|  | sta_info->ht_sta = false; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | for (i = 0; i < ARRAY_SIZE(sta_info->agg); i++) { | 
|  | struct carl9170_sta_tid *tid_info; | 
|  |  | 
|  | tid_info = rcu_dereference(sta_info->agg[i]); | 
|  | RCU_INIT_POINTER(sta_info->agg[i], NULL); | 
|  |  | 
|  | if (!tid_info) | 
|  | continue; | 
|  |  | 
|  | spin_lock_bh(&ar->tx_ampdu_list_lock); | 
|  | if (tid_info->state > CARL9170_TID_STATE_SHUTDOWN) | 
|  | tid_info->state = CARL9170_TID_STATE_SHUTDOWN; | 
|  | spin_unlock_bh(&ar->tx_ampdu_list_lock); | 
|  | cleanup = true; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (cleanup) | 
|  | carl9170_ampdu_gc(ar); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int carl9170_op_conf_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, u16 queue, | 
|  | const struct ieee80211_tx_queue_params *param) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | if (queue < ar->hw->queues) { | 
|  | memcpy(&ar->edcf[ar9170_qmap[queue]], param, sizeof(*param)); | 
|  | ret = carl9170_set_qos(ar); | 
|  | } else { | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void carl9170_ampdu_work(struct work_struct *work) | 
|  | { | 
|  | struct ar9170 *ar = container_of(work, struct ar9170, | 
|  | ampdu_work); | 
|  |  | 
|  | if (!IS_STARTED(ar)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | carl9170_ampdu_gc(ar); | 
|  | mutex_unlock(&ar->mutex); | 
|  | } | 
|  |  | 
|  | static int carl9170_op_ampdu_action(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum ieee80211_ampdu_mlme_action action, | 
|  | struct ieee80211_sta *sta, | 
|  | u16 tid, u16 *ssn, u8 buf_size, bool amsdu) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | struct carl9170_sta_info *sta_info = (void *) sta->drv_priv; | 
|  | struct carl9170_sta_tid *tid_info; | 
|  |  | 
|  | if (modparam_noht) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | switch (action) { | 
|  | case IEEE80211_AMPDU_TX_START: | 
|  | if (!sta_info->ht_sta) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | tid_info = kzalloc(sizeof(struct carl9170_sta_tid), | 
|  | GFP_ATOMIC); | 
|  | if (!tid_info) | 
|  | return -ENOMEM; | 
|  |  | 
|  | tid_info->hsn = tid_info->bsn = tid_info->snx = (*ssn); | 
|  | tid_info->state = CARL9170_TID_STATE_PROGRESS; | 
|  | tid_info->tid = tid; | 
|  | tid_info->max = sta_info->ampdu_max_len; | 
|  | tid_info->sta = sta; | 
|  | tid_info->vif = vif; | 
|  |  | 
|  | INIT_LIST_HEAD(&tid_info->list); | 
|  | INIT_LIST_HEAD(&tid_info->tmp_list); | 
|  | skb_queue_head_init(&tid_info->queue); | 
|  | spin_lock_init(&tid_info->lock); | 
|  |  | 
|  | spin_lock_bh(&ar->tx_ampdu_list_lock); | 
|  | ar->tx_ampdu_list_len++; | 
|  | list_add_tail_rcu(&tid_info->list, &ar->tx_ampdu_list); | 
|  | rcu_assign_pointer(sta_info->agg[tid], tid_info); | 
|  | spin_unlock_bh(&ar->tx_ampdu_list_lock); | 
|  |  | 
|  | ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); | 
|  | break; | 
|  |  | 
|  | case IEEE80211_AMPDU_TX_STOP_CONT: | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH: | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: | 
|  | rcu_read_lock(); | 
|  | tid_info = rcu_dereference(sta_info->agg[tid]); | 
|  | if (tid_info) { | 
|  | spin_lock_bh(&ar->tx_ampdu_list_lock); | 
|  | if (tid_info->state > CARL9170_TID_STATE_SHUTDOWN) | 
|  | tid_info->state = CARL9170_TID_STATE_SHUTDOWN; | 
|  | spin_unlock_bh(&ar->tx_ampdu_list_lock); | 
|  | } | 
|  |  | 
|  | RCU_INIT_POINTER(sta_info->agg[tid], NULL); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); | 
|  | ieee80211_queue_work(ar->hw, &ar->ampdu_work); | 
|  | break; | 
|  |  | 
|  | case IEEE80211_AMPDU_TX_OPERATIONAL: | 
|  | rcu_read_lock(); | 
|  | tid_info = rcu_dereference(sta_info->agg[tid]); | 
|  |  | 
|  | sta_info->stats[tid].clear = true; | 
|  | sta_info->stats[tid].req = false; | 
|  |  | 
|  | if (tid_info) { | 
|  | bitmap_zero(tid_info->bitmap, CARL9170_BAW_SIZE); | 
|  | tid_info->state = CARL9170_TID_STATE_IDLE; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (WARN_ON_ONCE(!tid_info)) | 
|  | return -EFAULT; | 
|  |  | 
|  | break; | 
|  |  | 
|  | case IEEE80211_AMPDU_RX_START: | 
|  | case IEEE80211_AMPDU_RX_STOP: | 
|  | /* Handled by hardware */ | 
|  | break; | 
|  |  | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_WPC | 
|  | static int carl9170_register_wps_button(struct ar9170 *ar) | 
|  | { | 
|  | struct input_dev *input; | 
|  | int err; | 
|  |  | 
|  | if (!(ar->features & CARL9170_WPS_BUTTON)) | 
|  | return 0; | 
|  |  | 
|  | input = input_allocate_device(); | 
|  | if (!input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | snprintf(ar->wps.name, sizeof(ar->wps.name), "%s WPS Button", | 
|  | wiphy_name(ar->hw->wiphy)); | 
|  |  | 
|  | snprintf(ar->wps.phys, sizeof(ar->wps.phys), | 
|  | "ieee80211/%s/input0", wiphy_name(ar->hw->wiphy)); | 
|  |  | 
|  | input->name = ar->wps.name; | 
|  | input->phys = ar->wps.phys; | 
|  | input->id.bustype = BUS_USB; | 
|  | input->dev.parent = &ar->hw->wiphy->dev; | 
|  |  | 
|  | input_set_capability(input, EV_KEY, KEY_WPS_BUTTON); | 
|  |  | 
|  | err = input_register_device(input); | 
|  | if (err) { | 
|  | input_free_device(input); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | ar->wps.pbc = input; | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_CARL9170_WPC */ | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_HWRNG | 
|  | static int carl9170_rng_get(struct ar9170 *ar) | 
|  | { | 
|  |  | 
|  | #define RW	(CARL9170_MAX_CMD_PAYLOAD_LEN / sizeof(u32)) | 
|  | #define RB	(CARL9170_MAX_CMD_PAYLOAD_LEN) | 
|  |  | 
|  | static const __le32 rng_load[RW] = { | 
|  | [0 ... (RW - 1)] = cpu_to_le32(AR9170_RAND_REG_NUM)}; | 
|  |  | 
|  | u32 buf[RW]; | 
|  |  | 
|  | unsigned int i, off = 0, transfer, count; | 
|  | int err; | 
|  |  | 
|  | BUILD_BUG_ON(RB > CARL9170_MAX_CMD_PAYLOAD_LEN); | 
|  |  | 
|  | if (!IS_ACCEPTING_CMD(ar) || !ar->rng.initialized) | 
|  | return -EAGAIN; | 
|  |  | 
|  | count = ARRAY_SIZE(ar->rng.cache); | 
|  | while (count) { | 
|  | err = carl9170_exec_cmd(ar, CARL9170_CMD_RREG, | 
|  | RB, (u8 *) rng_load, | 
|  | RB, (u8 *) buf); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | transfer = min_t(unsigned int, count, RW); | 
|  | for (i = 0; i < transfer; i++) | 
|  | ar->rng.cache[off + i] = buf[i]; | 
|  |  | 
|  | off += transfer; | 
|  | count -= transfer; | 
|  | } | 
|  |  | 
|  | ar->rng.cache_idx = 0; | 
|  |  | 
|  | #undef RW | 
|  | #undef RB | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int carl9170_rng_read(struct hwrng *rng, u32 *data) | 
|  | { | 
|  | struct ar9170 *ar = (struct ar9170 *)rng->priv; | 
|  | int ret = -EIO; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | if (ar->rng.cache_idx >= ARRAY_SIZE(ar->rng.cache)) { | 
|  | ret = carl9170_rng_get(ar); | 
|  | if (ret) { | 
|  | mutex_unlock(&ar->mutex); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | *data = ar->rng.cache[ar->rng.cache_idx++]; | 
|  | mutex_unlock(&ar->mutex); | 
|  |  | 
|  | return sizeof(u16); | 
|  | } | 
|  |  | 
|  | static void carl9170_unregister_hwrng(struct ar9170 *ar) | 
|  | { | 
|  | if (ar->rng.initialized) { | 
|  | hwrng_unregister(&ar->rng.rng); | 
|  | ar->rng.initialized = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int carl9170_register_hwrng(struct ar9170 *ar) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | snprintf(ar->rng.name, ARRAY_SIZE(ar->rng.name), | 
|  | "%s_%s", KBUILD_MODNAME, wiphy_name(ar->hw->wiphy)); | 
|  | ar->rng.rng.name = ar->rng.name; | 
|  | ar->rng.rng.data_read = carl9170_rng_read; | 
|  | ar->rng.rng.priv = (unsigned long)ar; | 
|  |  | 
|  | if (WARN_ON(ar->rng.initialized)) | 
|  | return -EALREADY; | 
|  |  | 
|  | err = hwrng_register(&ar->rng.rng); | 
|  | if (err) { | 
|  | dev_err(&ar->udev->dev, "Failed to register the random " | 
|  | "number generator (%d)\n", err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | ar->rng.initialized = true; | 
|  |  | 
|  | err = carl9170_rng_get(ar); | 
|  | if (err) { | 
|  | carl9170_unregister_hwrng(ar); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_CARL9170_HWRNG */ | 
|  |  | 
|  | static int carl9170_op_get_survey(struct ieee80211_hw *hw, int idx, | 
|  | struct survey_info *survey) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | struct ieee80211_channel *chan; | 
|  | struct ieee80211_supported_band *band; | 
|  | int err, b, i; | 
|  |  | 
|  | chan = ar->channel; | 
|  | if (!chan) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (idx == chan->hw_value) { | 
|  | mutex_lock(&ar->mutex); | 
|  | err = carl9170_update_survey(ar, false, true); | 
|  | mutex_unlock(&ar->mutex); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | for (b = 0; b < IEEE80211_NUM_BANDS; b++) { | 
|  | band = ar->hw->wiphy->bands[b]; | 
|  |  | 
|  | if (!band) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < band->n_channels; i++) { | 
|  | if (band->channels[i].hw_value == idx) { | 
|  | chan = &band->channels[i]; | 
|  | goto found; | 
|  | } | 
|  | } | 
|  | } | 
|  | return -ENOENT; | 
|  |  | 
|  | found: | 
|  | memcpy(survey, &ar->survey[idx], sizeof(*survey)); | 
|  |  | 
|  | survey->channel = chan; | 
|  | survey->filled = SURVEY_INFO_NOISE_DBM; | 
|  |  | 
|  | if (ar->channel == chan) | 
|  | survey->filled |= SURVEY_INFO_IN_USE; | 
|  |  | 
|  | if (ar->fw.hw_counters) { | 
|  | survey->filled |= SURVEY_INFO_TIME | | 
|  | SURVEY_INFO_TIME_BUSY | | 
|  | SURVEY_INFO_TIME_TX; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void carl9170_op_flush(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | u32 queues, bool drop) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  | unsigned int vid; | 
|  |  | 
|  | mutex_lock(&ar->mutex); | 
|  | for_each_set_bit(vid, &ar->vif_bitmap, ar->fw.vif_num) | 
|  | carl9170_flush_cab(ar, vid); | 
|  |  | 
|  | carl9170_flush(ar, drop); | 
|  | mutex_unlock(&ar->mutex); | 
|  | } | 
|  |  | 
|  | static int carl9170_op_get_stats(struct ieee80211_hw *hw, | 
|  | struct ieee80211_low_level_stats *stats) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  |  | 
|  | memset(stats, 0, sizeof(*stats)); | 
|  | stats->dot11ACKFailureCount = ar->tx_ack_failures; | 
|  | stats->dot11FCSErrorCount = ar->tx_fcs_errors; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void carl9170_op_sta_notify(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | enum sta_notify_cmd cmd, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct carl9170_sta_info *sta_info = (void *) sta->drv_priv; | 
|  |  | 
|  | switch (cmd) { | 
|  | case STA_NOTIFY_SLEEP: | 
|  | sta_info->sleeping = true; | 
|  | if (atomic_read(&sta_info->pending_frames)) | 
|  | ieee80211_sta_block_awake(hw, sta, true); | 
|  | break; | 
|  |  | 
|  | case STA_NOTIFY_AWAKE: | 
|  | sta_info->sleeping = false; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool carl9170_tx_frames_pending(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ar9170 *ar = hw->priv; | 
|  |  | 
|  | return !!atomic_read(&ar->tx_total_queued); | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_ops carl9170_ops = { | 
|  | .start			= carl9170_op_start, | 
|  | .stop			= carl9170_op_stop, | 
|  | .tx			= carl9170_op_tx, | 
|  | .flush			= carl9170_op_flush, | 
|  | .add_interface		= carl9170_op_add_interface, | 
|  | .remove_interface	= carl9170_op_remove_interface, | 
|  | .config			= carl9170_op_config, | 
|  | .prepare_multicast	= carl9170_op_prepare_multicast, | 
|  | .configure_filter	= carl9170_op_configure_filter, | 
|  | .conf_tx		= carl9170_op_conf_tx, | 
|  | .bss_info_changed	= carl9170_op_bss_info_changed, | 
|  | .get_tsf		= carl9170_op_get_tsf, | 
|  | .set_key		= carl9170_op_set_key, | 
|  | .sta_add		= carl9170_op_sta_add, | 
|  | .sta_remove		= carl9170_op_sta_remove, | 
|  | .sta_notify		= carl9170_op_sta_notify, | 
|  | .get_survey		= carl9170_op_get_survey, | 
|  | .get_stats		= carl9170_op_get_stats, | 
|  | .ampdu_action		= carl9170_op_ampdu_action, | 
|  | .tx_frames_pending	= carl9170_tx_frames_pending, | 
|  | }; | 
|  |  | 
|  | void *carl9170_alloc(size_t priv_size) | 
|  | { | 
|  | struct ieee80211_hw *hw; | 
|  | struct ar9170 *ar; | 
|  | struct sk_buff *skb; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * this buffer is used for rx stream reconstruction. | 
|  | * Under heavy load this device (or the transport layer?) | 
|  | * tends to split the streams into separate rx descriptors. | 
|  | */ | 
|  |  | 
|  | skb = __dev_alloc_skb(AR9170_RX_STREAM_MAX_SIZE, GFP_KERNEL); | 
|  | if (!skb) | 
|  | goto err_nomem; | 
|  |  | 
|  | hw = ieee80211_alloc_hw(priv_size, &carl9170_ops); | 
|  | if (!hw) | 
|  | goto err_nomem; | 
|  |  | 
|  | ar = hw->priv; | 
|  | ar->hw = hw; | 
|  | ar->rx_failover = skb; | 
|  |  | 
|  | memset(&ar->rx_plcp, 0, sizeof(struct ar9170_rx_head)); | 
|  | ar->rx_has_plcp = false; | 
|  |  | 
|  | /* | 
|  | * Here's a hidden pitfall! | 
|  | * | 
|  | * All 4 AC queues work perfectly well under _legacy_ operation. | 
|  | * However as soon as aggregation is enabled, the traffic flow | 
|  | * gets very bumpy. Therefore we have to _switch_ to a | 
|  | * software AC with a single HW queue. | 
|  | */ | 
|  | hw->queues = __AR9170_NUM_TXQ; | 
|  |  | 
|  | mutex_init(&ar->mutex); | 
|  | spin_lock_init(&ar->beacon_lock); | 
|  | spin_lock_init(&ar->cmd_lock); | 
|  | spin_lock_init(&ar->tx_stats_lock); | 
|  | spin_lock_init(&ar->tx_ampdu_list_lock); | 
|  | spin_lock_init(&ar->mem_lock); | 
|  | spin_lock_init(&ar->state_lock); | 
|  | atomic_set(&ar->pending_restarts, 0); | 
|  | ar->vifs = 0; | 
|  | for (i = 0; i < ar->hw->queues; i++) { | 
|  | skb_queue_head_init(&ar->tx_status[i]); | 
|  | skb_queue_head_init(&ar->tx_pending[i]); | 
|  |  | 
|  | INIT_LIST_HEAD(&ar->bar_list[i]); | 
|  | spin_lock_init(&ar->bar_list_lock[i]); | 
|  | } | 
|  | INIT_WORK(&ar->ps_work, carl9170_ps_work); | 
|  | INIT_WORK(&ar->ping_work, carl9170_ping_work); | 
|  | INIT_WORK(&ar->restart_work, carl9170_restart_work); | 
|  | INIT_WORK(&ar->ampdu_work, carl9170_ampdu_work); | 
|  | INIT_DELAYED_WORK(&ar->stat_work, carl9170_stat_work); | 
|  | INIT_DELAYED_WORK(&ar->tx_janitor, carl9170_tx_janitor); | 
|  | INIT_LIST_HEAD(&ar->tx_ampdu_list); | 
|  | rcu_assign_pointer(ar->tx_ampdu_iter, | 
|  | (struct carl9170_sta_tid *) &ar->tx_ampdu_list); | 
|  |  | 
|  | bitmap_zero(&ar->vif_bitmap, ar->fw.vif_num); | 
|  | INIT_LIST_HEAD(&ar->vif_list); | 
|  | init_completion(&ar->tx_flush); | 
|  |  | 
|  | /* firmware decides which modes we support */ | 
|  | hw->wiphy->interface_modes = 0; | 
|  |  | 
|  | ieee80211_hw_set(hw, RX_INCLUDES_FCS); | 
|  | ieee80211_hw_set(hw, MFP_CAPABLE); | 
|  | ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); | 
|  | ieee80211_hw_set(hw, SUPPORTS_PS); | 
|  | ieee80211_hw_set(hw, PS_NULLFUNC_STACK); | 
|  | ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC); | 
|  | ieee80211_hw_set(hw, SUPPORTS_RC_TABLE); | 
|  | ieee80211_hw_set(hw, SIGNAL_DBM); | 
|  | ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES); | 
|  |  | 
|  | if (!modparam_noht) { | 
|  | /* | 
|  | * see the comment above, why we allow the user | 
|  | * to disable HT by a module parameter. | 
|  | */ | 
|  | ieee80211_hw_set(hw, AMPDU_AGGREGATION); | 
|  | } | 
|  |  | 
|  | hw->extra_tx_headroom = sizeof(struct _carl9170_tx_superframe); | 
|  | hw->sta_data_size = sizeof(struct carl9170_sta_info); | 
|  | hw->vif_data_size = sizeof(struct carl9170_vif_info); | 
|  |  | 
|  | hw->max_rates = CARL9170_TX_MAX_RATES; | 
|  | hw->max_rate_tries = CARL9170_TX_USER_RATE_TRIES; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ar->noise); i++) | 
|  | ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */ | 
|  |  | 
|  | return ar; | 
|  |  | 
|  | err_nomem: | 
|  | kfree_skb(skb); | 
|  | return ERR_PTR(-ENOMEM); | 
|  | } | 
|  |  | 
|  | static int carl9170_read_eeprom(struct ar9170 *ar) | 
|  | { | 
|  | #define RW	8	/* number of words to read at once */ | 
|  | #define RB	(sizeof(u32) * RW) | 
|  | u8 *eeprom = (void *)&ar->eeprom; | 
|  | __le32 offsets[RW]; | 
|  | int i, j, err; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(ar->eeprom) & 3); | 
|  |  | 
|  | BUILD_BUG_ON(RB > CARL9170_MAX_CMD_LEN - 4); | 
|  | #ifndef __CHECKER__ | 
|  | /* don't want to handle trailing remains */ | 
|  | BUILD_BUG_ON(sizeof(ar->eeprom) % RB); | 
|  | #endif | 
|  |  | 
|  | for (i = 0; i < sizeof(ar->eeprom) / RB; i++) { | 
|  | for (j = 0; j < RW; j++) | 
|  | offsets[j] = cpu_to_le32(AR9170_EEPROM_START + | 
|  | RB * i + 4 * j); | 
|  |  | 
|  | err = carl9170_exec_cmd(ar, CARL9170_CMD_RREG, | 
|  | RB, (u8 *) &offsets, | 
|  | RB, eeprom + RB * i); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #undef RW | 
|  | #undef RB | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int carl9170_parse_eeprom(struct ar9170 *ar) | 
|  | { | 
|  | struct ath_regulatory *regulatory = &ar->common.regulatory; | 
|  | unsigned int rx_streams, tx_streams, tx_params = 0; | 
|  | int bands = 0; | 
|  | int chans = 0; | 
|  |  | 
|  | if (ar->eeprom.length == cpu_to_le16(0xffff)) | 
|  | return -ENODATA; | 
|  |  | 
|  | rx_streams = hweight8(ar->eeprom.rx_mask); | 
|  | tx_streams = hweight8(ar->eeprom.tx_mask); | 
|  |  | 
|  | if (rx_streams != tx_streams) { | 
|  | tx_params = IEEE80211_HT_MCS_TX_RX_DIFF; | 
|  |  | 
|  | WARN_ON(!(tx_streams >= 1 && tx_streams <= | 
|  | IEEE80211_HT_MCS_TX_MAX_STREAMS)); | 
|  |  | 
|  | tx_params = (tx_streams - 1) << | 
|  | IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; | 
|  |  | 
|  | carl9170_band_2GHz.ht_cap.mcs.tx_params |= tx_params; | 
|  | carl9170_band_5GHz.ht_cap.mcs.tx_params |= tx_params; | 
|  | } | 
|  |  | 
|  | if (ar->eeprom.operating_flags & AR9170_OPFLAG_2GHZ) { | 
|  | ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = | 
|  | &carl9170_band_2GHz; | 
|  | chans += carl9170_band_2GHz.n_channels; | 
|  | bands++; | 
|  | } | 
|  | if (ar->eeprom.operating_flags & AR9170_OPFLAG_5GHZ) { | 
|  | ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = | 
|  | &carl9170_band_5GHz; | 
|  | chans += carl9170_band_5GHz.n_channels; | 
|  | bands++; | 
|  | } | 
|  |  | 
|  | if (!bands) | 
|  | return -EINVAL; | 
|  |  | 
|  | ar->survey = kzalloc(sizeof(struct survey_info) * chans, GFP_KERNEL); | 
|  | if (!ar->survey) | 
|  | return -ENOMEM; | 
|  | ar->num_channels = chans; | 
|  |  | 
|  | regulatory->current_rd = le16_to_cpu(ar->eeprom.reg_domain[0]); | 
|  |  | 
|  | /* second part of wiphy init */ | 
|  | SET_IEEE80211_PERM_ADDR(ar->hw, ar->eeprom.mac_address); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void carl9170_reg_notifier(struct wiphy *wiphy, | 
|  | struct regulatory_request *request) | 
|  | { | 
|  | struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); | 
|  | struct ar9170 *ar = hw->priv; | 
|  |  | 
|  | ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory); | 
|  | } | 
|  |  | 
|  | int carl9170_register(struct ar9170 *ar) | 
|  | { | 
|  | struct ath_regulatory *regulatory = &ar->common.regulatory; | 
|  | int err = 0, i; | 
|  |  | 
|  | if (WARN_ON(ar->mem_bitmap)) | 
|  | return -EINVAL; | 
|  |  | 
|  | ar->mem_bitmap = kzalloc(roundup(ar->fw.mem_blocks, BITS_PER_LONG) * | 
|  | sizeof(unsigned long), GFP_KERNEL); | 
|  |  | 
|  | if (!ar->mem_bitmap) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* try to read EEPROM, init MAC addr */ | 
|  | err = carl9170_read_eeprom(ar); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = carl9170_parse_eeprom(ar); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = ath_regd_init(regulatory, ar->hw->wiphy, | 
|  | carl9170_reg_notifier); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (modparam_noht) { | 
|  | carl9170_band_2GHz.ht_cap.ht_supported = false; | 
|  | carl9170_band_5GHz.ht_cap.ht_supported = false; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ar->fw.vif_num; i++) { | 
|  | ar->vif_priv[i].id = i; | 
|  | ar->vif_priv[i].vif = NULL; | 
|  | } | 
|  |  | 
|  | err = ieee80211_register_hw(ar->hw); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | /* mac80211 interface is now registered */ | 
|  | ar->registered = true; | 
|  |  | 
|  | if (!ath_is_world_regd(regulatory)) | 
|  | regulatory_hint(ar->hw->wiphy, regulatory->alpha2); | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_DEBUGFS | 
|  | carl9170_debugfs_register(ar); | 
|  | #endif /* CONFIG_CARL9170_DEBUGFS */ | 
|  |  | 
|  | err = carl9170_led_init(ar); | 
|  | if (err) | 
|  | goto err_unreg; | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_LEDS | 
|  | err = carl9170_led_register(ar); | 
|  | if (err) | 
|  | goto err_unreg; | 
|  | #endif /* CONFIG_CARL9170_LEDS */ | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_WPC | 
|  | err = carl9170_register_wps_button(ar); | 
|  | if (err) | 
|  | goto err_unreg; | 
|  | #endif /* CONFIG_CARL9170_WPC */ | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_HWRNG | 
|  | err = carl9170_register_hwrng(ar); | 
|  | if (err) | 
|  | goto err_unreg; | 
|  | #endif /* CONFIG_CARL9170_HWRNG */ | 
|  |  | 
|  | dev_info(&ar->udev->dev, "Atheros AR9170 is registered as '%s'\n", | 
|  | wiphy_name(ar->hw->wiphy)); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_unreg: | 
|  | carl9170_unregister(ar); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | void carl9170_unregister(struct ar9170 *ar) | 
|  | { | 
|  | if (!ar->registered) | 
|  | return; | 
|  |  | 
|  | ar->registered = false; | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_LEDS | 
|  | carl9170_led_unregister(ar); | 
|  | #endif /* CONFIG_CARL9170_LEDS */ | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_DEBUGFS | 
|  | carl9170_debugfs_unregister(ar); | 
|  | #endif /* CONFIG_CARL9170_DEBUGFS */ | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_WPC | 
|  | if (ar->wps.pbc) { | 
|  | input_unregister_device(ar->wps.pbc); | 
|  | ar->wps.pbc = NULL; | 
|  | } | 
|  | #endif /* CONFIG_CARL9170_WPC */ | 
|  |  | 
|  | #ifdef CONFIG_CARL9170_HWRNG | 
|  | carl9170_unregister_hwrng(ar); | 
|  | #endif /* CONFIG_CARL9170_HWRNG */ | 
|  |  | 
|  | carl9170_cancel_worker(ar); | 
|  | cancel_work_sync(&ar->restart_work); | 
|  |  | 
|  | ieee80211_unregister_hw(ar->hw); | 
|  | } | 
|  |  | 
|  | void carl9170_free(struct ar9170 *ar) | 
|  | { | 
|  | WARN_ON(ar->registered); | 
|  | WARN_ON(IS_INITIALIZED(ar)); | 
|  |  | 
|  | kfree_skb(ar->rx_failover); | 
|  | ar->rx_failover = NULL; | 
|  |  | 
|  | kfree(ar->mem_bitmap); | 
|  | ar->mem_bitmap = NULL; | 
|  |  | 
|  | kfree(ar->survey); | 
|  | ar->survey = NULL; | 
|  |  | 
|  | mutex_destroy(&ar->mutex); | 
|  |  | 
|  | ieee80211_free_hw(ar->hw); | 
|  | } |