| /* | 
 |  * Copyright (c) 2000-2005 Silicon Graphics, Inc. | 
 |  * All Rights Reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it would be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write the Free Software Foundation, | 
 |  * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
 |  */ | 
 | #include "xfs.h" | 
 | #include "xfs_fs.h" | 
 | #include "xfs_shared.h" | 
 | #include "xfs_format.h" | 
 | #include "xfs_log_format.h" | 
 | #include "xfs_trans_resv.h" | 
 | #include "xfs_mount.h" | 
 | #include "xfs_da_format.h" | 
 | #include "xfs_da_btree.h" | 
 | #include "xfs_inode.h" | 
 | #include "xfs_trans.h" | 
 | #include "xfs_inode_item.h" | 
 | #include "xfs_bmap.h" | 
 | #include "xfs_bmap_util.h" | 
 | #include "xfs_error.h" | 
 | #include "xfs_dir2.h" | 
 | #include "xfs_dir2_priv.h" | 
 | #include "xfs_ioctl.h" | 
 | #include "xfs_trace.h" | 
 | #include "xfs_log.h" | 
 | #include "xfs_icache.h" | 
 | #include "xfs_pnfs.h" | 
 |  | 
 | #include <linux/dcache.h> | 
 | #include <linux/falloc.h> | 
 | #include <linux/pagevec.h> | 
 | #include <linux/backing-dev.h> | 
 |  | 
 | static const struct vm_operations_struct xfs_file_vm_ops; | 
 |  | 
 | /* | 
 |  * Locking primitives for read and write IO paths to ensure we consistently use | 
 |  * and order the inode->i_mutex, ip->i_lock and ip->i_iolock. | 
 |  */ | 
 | static inline void | 
 | xfs_rw_ilock( | 
 | 	struct xfs_inode	*ip, | 
 | 	int			type) | 
 | { | 
 | 	if (type & XFS_IOLOCK_EXCL) | 
 | 		inode_lock(VFS_I(ip)); | 
 | 	xfs_ilock(ip, type); | 
 | } | 
 |  | 
 | static inline void | 
 | xfs_rw_iunlock( | 
 | 	struct xfs_inode	*ip, | 
 | 	int			type) | 
 | { | 
 | 	xfs_iunlock(ip, type); | 
 | 	if (type & XFS_IOLOCK_EXCL) | 
 | 		inode_unlock(VFS_I(ip)); | 
 | } | 
 |  | 
 | static inline void | 
 | xfs_rw_ilock_demote( | 
 | 	struct xfs_inode	*ip, | 
 | 	int			type) | 
 | { | 
 | 	xfs_ilock_demote(ip, type); | 
 | 	if (type & XFS_IOLOCK_EXCL) | 
 | 		inode_unlock(VFS_I(ip)); | 
 | } | 
 |  | 
 | /* | 
 |  * xfs_iozero clears the specified range supplied via the page cache (except in | 
 |  * the DAX case). Writes through the page cache will allocate blocks over holes, | 
 |  * though the callers usually map the holes first and avoid them. If a block is | 
 |  * not completely zeroed, then it will be read from disk before being partially | 
 |  * zeroed. | 
 |  * | 
 |  * In the DAX case, we can just directly write to the underlying pages. This | 
 |  * will not allocate blocks, but will avoid holes and unwritten extents and so | 
 |  * not do unnecessary work. | 
 |  */ | 
 | int | 
 | xfs_iozero( | 
 | 	struct xfs_inode	*ip,	/* inode			*/ | 
 | 	loff_t			pos,	/* offset in file		*/ | 
 | 	size_t			count)	/* size of data to zero		*/ | 
 | { | 
 | 	struct page		*page; | 
 | 	struct address_space	*mapping; | 
 | 	int			status = 0; | 
 |  | 
 |  | 
 | 	mapping = VFS_I(ip)->i_mapping; | 
 | 	do { | 
 | 		unsigned offset, bytes; | 
 | 		void *fsdata; | 
 |  | 
 | 		offset = (pos & (PAGE_CACHE_SIZE -1)); /* Within page */ | 
 | 		bytes = PAGE_CACHE_SIZE - offset; | 
 | 		if (bytes > count) | 
 | 			bytes = count; | 
 |  | 
 | 		if (IS_DAX(VFS_I(ip))) { | 
 | 			status = dax_zero_page_range(VFS_I(ip), pos, bytes, | 
 | 						     xfs_get_blocks_direct); | 
 | 			if (status) | 
 | 				break; | 
 | 		} else { | 
 | 			status = pagecache_write_begin(NULL, mapping, pos, bytes, | 
 | 						AOP_FLAG_UNINTERRUPTIBLE, | 
 | 						&page, &fsdata); | 
 | 			if (status) | 
 | 				break; | 
 |  | 
 | 			zero_user(page, offset, bytes); | 
 |  | 
 | 			status = pagecache_write_end(NULL, mapping, pos, bytes, | 
 | 						bytes, page, fsdata); | 
 | 			WARN_ON(status <= 0); /* can't return less than zero! */ | 
 | 			status = 0; | 
 | 		} | 
 | 		pos += bytes; | 
 | 		count -= bytes; | 
 | 	} while (count); | 
 |  | 
 | 	return status; | 
 | } | 
 |  | 
 | int | 
 | xfs_update_prealloc_flags( | 
 | 	struct xfs_inode	*ip, | 
 | 	enum xfs_prealloc_flags	flags) | 
 | { | 
 | 	struct xfs_trans	*tp; | 
 | 	int			error; | 
 |  | 
 | 	tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_WRITEID); | 
 | 	error = xfs_trans_reserve(tp, &M_RES(ip->i_mount)->tr_writeid, 0, 0); | 
 | 	if (error) { | 
 | 		xfs_trans_cancel(tp); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	xfs_ilock(ip, XFS_ILOCK_EXCL); | 
 | 	xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); | 
 |  | 
 | 	if (!(flags & XFS_PREALLOC_INVISIBLE)) { | 
 | 		ip->i_d.di_mode &= ~S_ISUID; | 
 | 		if (ip->i_d.di_mode & S_IXGRP) | 
 | 			ip->i_d.di_mode &= ~S_ISGID; | 
 | 		xfs_trans_ichgtime(tp, ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); | 
 | 	} | 
 |  | 
 | 	if (flags & XFS_PREALLOC_SET) | 
 | 		ip->i_d.di_flags |= XFS_DIFLAG_PREALLOC; | 
 | 	if (flags & XFS_PREALLOC_CLEAR) | 
 | 		ip->i_d.di_flags &= ~XFS_DIFLAG_PREALLOC; | 
 |  | 
 | 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); | 
 | 	if (flags & XFS_PREALLOC_SYNC) | 
 | 		xfs_trans_set_sync(tp); | 
 | 	return xfs_trans_commit(tp); | 
 | } | 
 |  | 
 | /* | 
 |  * Fsync operations on directories are much simpler than on regular files, | 
 |  * as there is no file data to flush, and thus also no need for explicit | 
 |  * cache flush operations, and there are no non-transaction metadata updates | 
 |  * on directories either. | 
 |  */ | 
 | STATIC int | 
 | xfs_dir_fsync( | 
 | 	struct file		*file, | 
 | 	loff_t			start, | 
 | 	loff_t			end, | 
 | 	int			datasync) | 
 | { | 
 | 	struct xfs_inode	*ip = XFS_I(file->f_mapping->host); | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	xfs_lsn_t		lsn = 0; | 
 |  | 
 | 	trace_xfs_dir_fsync(ip); | 
 |  | 
 | 	xfs_ilock(ip, XFS_ILOCK_SHARED); | 
 | 	if (xfs_ipincount(ip)) | 
 | 		lsn = ip->i_itemp->ili_last_lsn; | 
 | 	xfs_iunlock(ip, XFS_ILOCK_SHARED); | 
 |  | 
 | 	if (!lsn) | 
 | 		return 0; | 
 | 	return _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, NULL); | 
 | } | 
 |  | 
 | STATIC int | 
 | xfs_file_fsync( | 
 | 	struct file		*file, | 
 | 	loff_t			start, | 
 | 	loff_t			end, | 
 | 	int			datasync) | 
 | { | 
 | 	struct inode		*inode = file->f_mapping->host; | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	int			error = 0; | 
 | 	int			log_flushed = 0; | 
 | 	xfs_lsn_t		lsn = 0; | 
 |  | 
 | 	trace_xfs_file_fsync(ip); | 
 |  | 
 | 	error = filemap_write_and_wait_range(inode->i_mapping, start, end); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	if (XFS_FORCED_SHUTDOWN(mp)) | 
 | 		return -EIO; | 
 |  | 
 | 	xfs_iflags_clear(ip, XFS_ITRUNCATED); | 
 |  | 
 | 	if (mp->m_flags & XFS_MOUNT_BARRIER) { | 
 | 		/* | 
 | 		 * If we have an RT and/or log subvolume we need to make sure | 
 | 		 * to flush the write cache the device used for file data | 
 | 		 * first.  This is to ensure newly written file data make | 
 | 		 * it to disk before logging the new inode size in case of | 
 | 		 * an extending write. | 
 | 		 */ | 
 | 		if (XFS_IS_REALTIME_INODE(ip)) | 
 | 			xfs_blkdev_issue_flush(mp->m_rtdev_targp); | 
 | 		else if (mp->m_logdev_targp != mp->m_ddev_targp) | 
 | 			xfs_blkdev_issue_flush(mp->m_ddev_targp); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * All metadata updates are logged, which means that we just have to | 
 | 	 * flush the log up to the latest LSN that touched the inode. If we have | 
 | 	 * concurrent fsync/fdatasync() calls, we need them to all block on the | 
 | 	 * log force before we clear the ili_fsync_fields field. This ensures | 
 | 	 * that we don't get a racing sync operation that does not wait for the | 
 | 	 * metadata to hit the journal before returning. If we race with | 
 | 	 * clearing the ili_fsync_fields, then all that will happen is the log | 
 | 	 * force will do nothing as the lsn will already be on disk. We can't | 
 | 	 * race with setting ili_fsync_fields because that is done under | 
 | 	 * XFS_ILOCK_EXCL, and that can't happen because we hold the lock shared | 
 | 	 * until after the ili_fsync_fields is cleared. | 
 | 	 */ | 
 | 	xfs_ilock(ip, XFS_ILOCK_SHARED); | 
 | 	if (xfs_ipincount(ip)) { | 
 | 		if (!datasync || | 
 | 		    (ip->i_itemp->ili_fsync_fields & ~XFS_ILOG_TIMESTAMP)) | 
 | 			lsn = ip->i_itemp->ili_last_lsn; | 
 | 	} | 
 |  | 
 | 	if (lsn) { | 
 | 		error = _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, &log_flushed); | 
 | 		ip->i_itemp->ili_fsync_fields = 0; | 
 | 	} | 
 | 	xfs_iunlock(ip, XFS_ILOCK_SHARED); | 
 |  | 
 | 	/* | 
 | 	 * If we only have a single device, and the log force about was | 
 | 	 * a no-op we might have to flush the data device cache here. | 
 | 	 * This can only happen for fdatasync/O_DSYNC if we were overwriting | 
 | 	 * an already allocated file and thus do not have any metadata to | 
 | 	 * commit. | 
 | 	 */ | 
 | 	if ((mp->m_flags & XFS_MOUNT_BARRIER) && | 
 | 	    mp->m_logdev_targp == mp->m_ddev_targp && | 
 | 	    !XFS_IS_REALTIME_INODE(ip) && | 
 | 	    !log_flushed) | 
 | 		xfs_blkdev_issue_flush(mp->m_ddev_targp); | 
 |  | 
 | 	return error; | 
 | } | 
 |  | 
 | STATIC ssize_t | 
 | xfs_file_read_iter( | 
 | 	struct kiocb		*iocb, | 
 | 	struct iov_iter		*to) | 
 | { | 
 | 	struct file		*file = iocb->ki_filp; | 
 | 	struct inode		*inode = file->f_mapping->host; | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	size_t			size = iov_iter_count(to); | 
 | 	ssize_t			ret = 0; | 
 | 	int			ioflags = 0; | 
 | 	xfs_fsize_t		n; | 
 | 	loff_t			pos = iocb->ki_pos; | 
 |  | 
 | 	XFS_STATS_INC(mp, xs_read_calls); | 
 |  | 
 | 	if (unlikely(iocb->ki_flags & IOCB_DIRECT)) | 
 | 		ioflags |= XFS_IO_ISDIRECT; | 
 | 	if (file->f_mode & FMODE_NOCMTIME) | 
 | 		ioflags |= XFS_IO_INVIS; | 
 |  | 
 | 	if ((ioflags & XFS_IO_ISDIRECT) && !IS_DAX(inode)) { | 
 | 		xfs_buftarg_t	*target = | 
 | 			XFS_IS_REALTIME_INODE(ip) ? | 
 | 				mp->m_rtdev_targp : mp->m_ddev_targp; | 
 | 		/* DIO must be aligned to device logical sector size */ | 
 | 		if ((pos | size) & target->bt_logical_sectormask) { | 
 | 			if (pos == i_size_read(inode)) | 
 | 				return 0; | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	n = mp->m_super->s_maxbytes - pos; | 
 | 	if (n <= 0 || size == 0) | 
 | 		return 0; | 
 |  | 
 | 	if (n < size) | 
 | 		size = n; | 
 |  | 
 | 	if (XFS_FORCED_SHUTDOWN(mp)) | 
 | 		return -EIO; | 
 |  | 
 | 	/* | 
 | 	 * Locking is a bit tricky here. If we take an exclusive lock for direct | 
 | 	 * IO, we effectively serialise all new concurrent read IO to this file | 
 | 	 * and block it behind IO that is currently in progress because IO in | 
 | 	 * progress holds the IO lock shared. We only need to hold the lock | 
 | 	 * exclusive to blow away the page cache, so only take lock exclusively | 
 | 	 * if the page cache needs invalidation. This allows the normal direct | 
 | 	 * IO case of no page cache pages to proceeed concurrently without | 
 | 	 * serialisation. | 
 | 	 */ | 
 | 	xfs_rw_ilock(ip, XFS_IOLOCK_SHARED); | 
 | 	if ((ioflags & XFS_IO_ISDIRECT) && inode->i_mapping->nrpages) { | 
 | 		xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED); | 
 | 		xfs_rw_ilock(ip, XFS_IOLOCK_EXCL); | 
 |  | 
 | 		/* | 
 | 		 * The generic dio code only flushes the range of the particular | 
 | 		 * I/O. Because we take an exclusive lock here, this whole | 
 | 		 * sequence is considerably more expensive for us. This has a | 
 | 		 * noticeable performance impact for any file with cached pages, | 
 | 		 * even when outside of the range of the particular I/O. | 
 | 		 * | 
 | 		 * Hence, amortize the cost of the lock against a full file | 
 | 		 * flush and reduce the chances of repeated iolock cycles going | 
 | 		 * forward. | 
 | 		 */ | 
 | 		if (inode->i_mapping->nrpages) { | 
 | 			ret = filemap_write_and_wait(VFS_I(ip)->i_mapping); | 
 | 			if (ret) { | 
 | 				xfs_rw_iunlock(ip, XFS_IOLOCK_EXCL); | 
 | 				return ret; | 
 | 			} | 
 |  | 
 | 			/* | 
 | 			 * Invalidate whole pages. This can return an error if | 
 | 			 * we fail to invalidate a page, but this should never | 
 | 			 * happen on XFS. Warn if it does fail. | 
 | 			 */ | 
 | 			ret = invalidate_inode_pages2(VFS_I(ip)->i_mapping); | 
 | 			WARN_ON_ONCE(ret); | 
 | 			ret = 0; | 
 | 		} | 
 | 		xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL); | 
 | 	} | 
 |  | 
 | 	trace_xfs_file_read(ip, size, pos, ioflags); | 
 |  | 
 | 	ret = generic_file_read_iter(iocb, to); | 
 | 	if (ret > 0) | 
 | 		XFS_STATS_ADD(mp, xs_read_bytes, ret); | 
 |  | 
 | 	xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED); | 
 | 	return ret; | 
 | } | 
 |  | 
 | STATIC ssize_t | 
 | xfs_file_splice_read( | 
 | 	struct file		*infilp, | 
 | 	loff_t			*ppos, | 
 | 	struct pipe_inode_info	*pipe, | 
 | 	size_t			count, | 
 | 	unsigned int		flags) | 
 | { | 
 | 	struct xfs_inode	*ip = XFS_I(infilp->f_mapping->host); | 
 | 	int			ioflags = 0; | 
 | 	ssize_t			ret; | 
 |  | 
 | 	XFS_STATS_INC(ip->i_mount, xs_read_calls); | 
 |  | 
 | 	if (infilp->f_mode & FMODE_NOCMTIME) | 
 | 		ioflags |= XFS_IO_INVIS; | 
 |  | 
 | 	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) | 
 | 		return -EIO; | 
 |  | 
 | 	trace_xfs_file_splice_read(ip, count, *ppos, ioflags); | 
 |  | 
 | 	/* | 
 | 	 * DAX inodes cannot ues the page cache for splice, so we have to push | 
 | 	 * them through the VFS IO path. This means it goes through | 
 | 	 * ->read_iter, which for us takes the XFS_IOLOCK_SHARED. Hence we | 
 | 	 * cannot lock the splice operation at this level for DAX inodes. | 
 | 	 */ | 
 | 	if (IS_DAX(VFS_I(ip))) { | 
 | 		ret = default_file_splice_read(infilp, ppos, pipe, count, | 
 | 					       flags); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	xfs_rw_ilock(ip, XFS_IOLOCK_SHARED); | 
 | 	ret = generic_file_splice_read(infilp, ppos, pipe, count, flags); | 
 | 	xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED); | 
 | out: | 
 | 	if (ret > 0) | 
 | 		XFS_STATS_ADD(ip->i_mount, xs_read_bytes, ret); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine is called to handle zeroing any space in the last block of the | 
 |  * file that is beyond the EOF.  We do this since the size is being increased | 
 |  * without writing anything to that block and we don't want to read the | 
 |  * garbage on the disk. | 
 |  */ | 
 | STATIC int				/* error (positive) */ | 
 | xfs_zero_last_block( | 
 | 	struct xfs_inode	*ip, | 
 | 	xfs_fsize_t		offset, | 
 | 	xfs_fsize_t		isize, | 
 | 	bool			*did_zeroing) | 
 | { | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	xfs_fileoff_t		last_fsb = XFS_B_TO_FSBT(mp, isize); | 
 | 	int			zero_offset = XFS_B_FSB_OFFSET(mp, isize); | 
 | 	int			zero_len; | 
 | 	int			nimaps = 1; | 
 | 	int			error = 0; | 
 | 	struct xfs_bmbt_irec	imap; | 
 |  | 
 | 	xfs_ilock(ip, XFS_ILOCK_EXCL); | 
 | 	error = xfs_bmapi_read(ip, last_fsb, 1, &imap, &nimaps, 0); | 
 | 	xfs_iunlock(ip, XFS_ILOCK_EXCL); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	ASSERT(nimaps > 0); | 
 |  | 
 | 	/* | 
 | 	 * If the block underlying isize is just a hole, then there | 
 | 	 * is nothing to zero. | 
 | 	 */ | 
 | 	if (imap.br_startblock == HOLESTARTBLOCK) | 
 | 		return 0; | 
 |  | 
 | 	zero_len = mp->m_sb.sb_blocksize - zero_offset; | 
 | 	if (isize + zero_len > offset) | 
 | 		zero_len = offset - isize; | 
 | 	*did_zeroing = true; | 
 | 	return xfs_iozero(ip, isize, zero_len); | 
 | } | 
 |  | 
 | /* | 
 |  * Zero any on disk space between the current EOF and the new, larger EOF. | 
 |  * | 
 |  * This handles the normal case of zeroing the remainder of the last block in | 
 |  * the file and the unusual case of zeroing blocks out beyond the size of the | 
 |  * file.  This second case only happens with fixed size extents and when the | 
 |  * system crashes before the inode size was updated but after blocks were | 
 |  * allocated. | 
 |  * | 
 |  * Expects the iolock to be held exclusive, and will take the ilock internally. | 
 |  */ | 
 | int					/* error (positive) */ | 
 | xfs_zero_eof( | 
 | 	struct xfs_inode	*ip, | 
 | 	xfs_off_t		offset,		/* starting I/O offset */ | 
 | 	xfs_fsize_t		isize,		/* current inode size */ | 
 | 	bool			*did_zeroing) | 
 | { | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	xfs_fileoff_t		start_zero_fsb; | 
 | 	xfs_fileoff_t		end_zero_fsb; | 
 | 	xfs_fileoff_t		zero_count_fsb; | 
 | 	xfs_fileoff_t		last_fsb; | 
 | 	xfs_fileoff_t		zero_off; | 
 | 	xfs_fsize_t		zero_len; | 
 | 	int			nimaps; | 
 | 	int			error = 0; | 
 | 	struct xfs_bmbt_irec	imap; | 
 |  | 
 | 	ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL)); | 
 | 	ASSERT(offset > isize); | 
 |  | 
 | 	trace_xfs_zero_eof(ip, isize, offset - isize); | 
 |  | 
 | 	/* | 
 | 	 * First handle zeroing the block on which isize resides. | 
 | 	 * | 
 | 	 * We only zero a part of that block so it is handled specially. | 
 | 	 */ | 
 | 	if (XFS_B_FSB_OFFSET(mp, isize) != 0) { | 
 | 		error = xfs_zero_last_block(ip, offset, isize, did_zeroing); | 
 | 		if (error) | 
 | 			return error; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Calculate the range between the new size and the old where blocks | 
 | 	 * needing to be zeroed may exist. | 
 | 	 * | 
 | 	 * To get the block where the last byte in the file currently resides, | 
 | 	 * we need to subtract one from the size and truncate back to a block | 
 | 	 * boundary.  We subtract 1 in case the size is exactly on a block | 
 | 	 * boundary. | 
 | 	 */ | 
 | 	last_fsb = isize ? XFS_B_TO_FSBT(mp, isize - 1) : (xfs_fileoff_t)-1; | 
 | 	start_zero_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)isize); | 
 | 	end_zero_fsb = XFS_B_TO_FSBT(mp, offset - 1); | 
 | 	ASSERT((xfs_sfiloff_t)last_fsb < (xfs_sfiloff_t)start_zero_fsb); | 
 | 	if (last_fsb == end_zero_fsb) { | 
 | 		/* | 
 | 		 * The size was only incremented on its last block. | 
 | 		 * We took care of that above, so just return. | 
 | 		 */ | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	ASSERT(start_zero_fsb <= end_zero_fsb); | 
 | 	while (start_zero_fsb <= end_zero_fsb) { | 
 | 		nimaps = 1; | 
 | 		zero_count_fsb = end_zero_fsb - start_zero_fsb + 1; | 
 |  | 
 | 		xfs_ilock(ip, XFS_ILOCK_EXCL); | 
 | 		error = xfs_bmapi_read(ip, start_zero_fsb, zero_count_fsb, | 
 | 					  &imap, &nimaps, 0); | 
 | 		xfs_iunlock(ip, XFS_ILOCK_EXCL); | 
 | 		if (error) | 
 | 			return error; | 
 |  | 
 | 		ASSERT(nimaps > 0); | 
 |  | 
 | 		if (imap.br_state == XFS_EXT_UNWRITTEN || | 
 | 		    imap.br_startblock == HOLESTARTBLOCK) { | 
 | 			start_zero_fsb = imap.br_startoff + imap.br_blockcount; | 
 | 			ASSERT(start_zero_fsb <= (end_zero_fsb + 1)); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * There are blocks we need to zero. | 
 | 		 */ | 
 | 		zero_off = XFS_FSB_TO_B(mp, start_zero_fsb); | 
 | 		zero_len = XFS_FSB_TO_B(mp, imap.br_blockcount); | 
 |  | 
 | 		if ((zero_off + zero_len) > offset) | 
 | 			zero_len = offset - zero_off; | 
 |  | 
 | 		error = xfs_iozero(ip, zero_off, zero_len); | 
 | 		if (error) | 
 | 			return error; | 
 |  | 
 | 		*did_zeroing = true; | 
 | 		start_zero_fsb = imap.br_startoff + imap.br_blockcount; | 
 | 		ASSERT(start_zero_fsb <= (end_zero_fsb + 1)); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Common pre-write limit and setup checks. | 
 |  * | 
 |  * Called with the iolocked held either shared and exclusive according to | 
 |  * @iolock, and returns with it held.  Might upgrade the iolock to exclusive | 
 |  * if called for a direct write beyond i_size. | 
 |  */ | 
 | STATIC ssize_t | 
 | xfs_file_aio_write_checks( | 
 | 	struct kiocb		*iocb, | 
 | 	struct iov_iter		*from, | 
 | 	int			*iolock) | 
 | { | 
 | 	struct file		*file = iocb->ki_filp; | 
 | 	struct inode		*inode = file->f_mapping->host; | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	ssize_t			error = 0; | 
 | 	size_t			count = iov_iter_count(from); | 
 | 	bool			drained_dio = false; | 
 |  | 
 | restart: | 
 | 	error = generic_write_checks(iocb, from); | 
 | 	if (error <= 0) | 
 | 		return error; | 
 |  | 
 | 	error = xfs_break_layouts(inode, iolock, true); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	/* For changing security info in file_remove_privs() we need i_mutex */ | 
 | 	if (*iolock == XFS_IOLOCK_SHARED && !IS_NOSEC(inode)) { | 
 | 		xfs_rw_iunlock(ip, *iolock); | 
 | 		*iolock = XFS_IOLOCK_EXCL; | 
 | 		xfs_rw_ilock(ip, *iolock); | 
 | 		goto restart; | 
 | 	} | 
 | 	/* | 
 | 	 * If the offset is beyond the size of the file, we need to zero any | 
 | 	 * blocks that fall between the existing EOF and the start of this | 
 | 	 * write.  If zeroing is needed and we are currently holding the | 
 | 	 * iolock shared, we need to update it to exclusive which implies | 
 | 	 * having to redo all checks before. | 
 | 	 * | 
 | 	 * We need to serialise against EOF updates that occur in IO | 
 | 	 * completions here. We want to make sure that nobody is changing the | 
 | 	 * size while we do this check until we have placed an IO barrier (i.e. | 
 | 	 * hold the XFS_IOLOCK_EXCL) that prevents new IO from being dispatched. | 
 | 	 * The spinlock effectively forms a memory barrier once we have the | 
 | 	 * XFS_IOLOCK_EXCL so we are guaranteed to see the latest EOF value | 
 | 	 * and hence be able to correctly determine if we need to run zeroing. | 
 | 	 */ | 
 | 	spin_lock(&ip->i_flags_lock); | 
 | 	if (iocb->ki_pos > i_size_read(inode)) { | 
 | 		bool	zero = false; | 
 |  | 
 | 		spin_unlock(&ip->i_flags_lock); | 
 | 		if (!drained_dio) { | 
 | 			if (*iolock == XFS_IOLOCK_SHARED) { | 
 | 				xfs_rw_iunlock(ip, *iolock); | 
 | 				*iolock = XFS_IOLOCK_EXCL; | 
 | 				xfs_rw_ilock(ip, *iolock); | 
 | 				iov_iter_reexpand(from, count); | 
 | 			} | 
 | 			/* | 
 | 			 * We now have an IO submission barrier in place, but | 
 | 			 * AIO can do EOF updates during IO completion and hence | 
 | 			 * we now need to wait for all of them to drain. Non-AIO | 
 | 			 * DIO will have drained before we are given the | 
 | 			 * XFS_IOLOCK_EXCL, and so for most cases this wait is a | 
 | 			 * no-op. | 
 | 			 */ | 
 | 			inode_dio_wait(inode); | 
 | 			drained_dio = true; | 
 | 			goto restart; | 
 | 		} | 
 | 		error = xfs_zero_eof(ip, iocb->ki_pos, i_size_read(inode), &zero); | 
 | 		if (error) | 
 | 			return error; | 
 | 	} else | 
 | 		spin_unlock(&ip->i_flags_lock); | 
 |  | 
 | 	/* | 
 | 	 * Updating the timestamps will grab the ilock again from | 
 | 	 * xfs_fs_dirty_inode, so we have to call it after dropping the | 
 | 	 * lock above.  Eventually we should look into a way to avoid | 
 | 	 * the pointless lock roundtrip. | 
 | 	 */ | 
 | 	if (likely(!(file->f_mode & FMODE_NOCMTIME))) { | 
 | 		error = file_update_time(file); | 
 | 		if (error) | 
 | 			return error; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If we're writing the file then make sure to clear the setuid and | 
 | 	 * setgid bits if the process is not being run by root.  This keeps | 
 | 	 * people from modifying setuid and setgid binaries. | 
 | 	 */ | 
 | 	if (!IS_NOSEC(inode)) | 
 | 		return file_remove_privs(file); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * xfs_file_dio_aio_write - handle direct IO writes | 
 |  * | 
 |  * Lock the inode appropriately to prepare for and issue a direct IO write. | 
 |  * By separating it from the buffered write path we remove all the tricky to | 
 |  * follow locking changes and looping. | 
 |  * | 
 |  * If there are cached pages or we're extending the file, we need IOLOCK_EXCL | 
 |  * until we're sure the bytes at the new EOF have been zeroed and/or the cached | 
 |  * pages are flushed out. | 
 |  * | 
 |  * In most cases the direct IO writes will be done holding IOLOCK_SHARED | 
 |  * allowing them to be done in parallel with reads and other direct IO writes. | 
 |  * However, if the IO is not aligned to filesystem blocks, the direct IO layer | 
 |  * needs to do sub-block zeroing and that requires serialisation against other | 
 |  * direct IOs to the same block. In this case we need to serialise the | 
 |  * submission of the unaligned IOs so that we don't get racing block zeroing in | 
 |  * the dio layer.  To avoid the problem with aio, we also need to wait for | 
 |  * outstanding IOs to complete so that unwritten extent conversion is completed | 
 |  * before we try to map the overlapping block. This is currently implemented by | 
 |  * hitting it with a big hammer (i.e. inode_dio_wait()). | 
 |  * | 
 |  * Returns with locks held indicated by @iolock and errors indicated by | 
 |  * negative return values. | 
 |  */ | 
 | STATIC ssize_t | 
 | xfs_file_dio_aio_write( | 
 | 	struct kiocb		*iocb, | 
 | 	struct iov_iter		*from) | 
 | { | 
 | 	struct file		*file = iocb->ki_filp; | 
 | 	struct address_space	*mapping = file->f_mapping; | 
 | 	struct inode		*inode = mapping->host; | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	ssize_t			ret = 0; | 
 | 	int			unaligned_io = 0; | 
 | 	int			iolock; | 
 | 	size_t			count = iov_iter_count(from); | 
 | 	loff_t			pos = iocb->ki_pos; | 
 | 	loff_t			end; | 
 | 	struct iov_iter		data; | 
 | 	struct xfs_buftarg	*target = XFS_IS_REALTIME_INODE(ip) ? | 
 | 					mp->m_rtdev_targp : mp->m_ddev_targp; | 
 |  | 
 | 	/* DIO must be aligned to device logical sector size */ | 
 | 	if (!IS_DAX(inode) && ((pos | count) & target->bt_logical_sectormask)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* "unaligned" here means not aligned to a filesystem block */ | 
 | 	if ((pos & mp->m_blockmask) || ((pos + count) & mp->m_blockmask)) | 
 | 		unaligned_io = 1; | 
 |  | 
 | 	/* | 
 | 	 * We don't need to take an exclusive lock unless there page cache needs | 
 | 	 * to be invalidated or unaligned IO is being executed. We don't need to | 
 | 	 * consider the EOF extension case here because | 
 | 	 * xfs_file_aio_write_checks() will relock the inode as necessary for | 
 | 	 * EOF zeroing cases and fill out the new inode size as appropriate. | 
 | 	 */ | 
 | 	if (unaligned_io || mapping->nrpages) | 
 | 		iolock = XFS_IOLOCK_EXCL; | 
 | 	else | 
 | 		iolock = XFS_IOLOCK_SHARED; | 
 | 	xfs_rw_ilock(ip, iolock); | 
 |  | 
 | 	/* | 
 | 	 * Recheck if there are cached pages that need invalidate after we got | 
 | 	 * the iolock to protect against other threads adding new pages while | 
 | 	 * we were waiting for the iolock. | 
 | 	 */ | 
 | 	if (mapping->nrpages && iolock == XFS_IOLOCK_SHARED) { | 
 | 		xfs_rw_iunlock(ip, iolock); | 
 | 		iolock = XFS_IOLOCK_EXCL; | 
 | 		xfs_rw_ilock(ip, iolock); | 
 | 	} | 
 |  | 
 | 	ret = xfs_file_aio_write_checks(iocb, from, &iolock); | 
 | 	if (ret) | 
 | 		goto out; | 
 | 	count = iov_iter_count(from); | 
 | 	pos = iocb->ki_pos; | 
 | 	end = pos + count - 1; | 
 |  | 
 | 	/* | 
 | 	 * See xfs_file_read_iter() for why we do a full-file flush here. | 
 | 	 */ | 
 | 	if (mapping->nrpages) { | 
 | 		ret = filemap_write_and_wait(VFS_I(ip)->i_mapping); | 
 | 		if (ret) | 
 | 			goto out; | 
 | 		/* | 
 | 		 * Invalidate whole pages. This can return an error if we fail | 
 | 		 * to invalidate a page, but this should never happen on XFS. | 
 | 		 * Warn if it does fail. | 
 | 		 */ | 
 | 		ret = invalidate_inode_pages2(VFS_I(ip)->i_mapping); | 
 | 		WARN_ON_ONCE(ret); | 
 | 		ret = 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If we are doing unaligned IO, wait for all other IO to drain, | 
 | 	 * otherwise demote the lock if we had to flush cached pages | 
 | 	 */ | 
 | 	if (unaligned_io) | 
 | 		inode_dio_wait(inode); | 
 | 	else if (iolock == XFS_IOLOCK_EXCL) { | 
 | 		xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL); | 
 | 		iolock = XFS_IOLOCK_SHARED; | 
 | 	} | 
 |  | 
 | 	trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0); | 
 |  | 
 | 	data = *from; | 
 | 	ret = mapping->a_ops->direct_IO(iocb, &data, pos); | 
 |  | 
 | 	/* see generic_file_direct_write() for why this is necessary */ | 
 | 	if (mapping->nrpages) { | 
 | 		invalidate_inode_pages2_range(mapping, | 
 | 					      pos >> PAGE_CACHE_SHIFT, | 
 | 					      end >> PAGE_CACHE_SHIFT); | 
 | 	} | 
 |  | 
 | 	if (ret > 0) { | 
 | 		pos += ret; | 
 | 		iov_iter_advance(from, ret); | 
 | 		iocb->ki_pos = pos; | 
 | 	} | 
 | out: | 
 | 	xfs_rw_iunlock(ip, iolock); | 
 |  | 
 | 	/* | 
 | 	 * No fallback to buffered IO on errors for XFS. DAX can result in | 
 | 	 * partial writes, but direct IO will either complete fully or fail. | 
 | 	 */ | 
 | 	ASSERT(ret < 0 || ret == count || IS_DAX(VFS_I(ip))); | 
 | 	return ret; | 
 | } | 
 |  | 
 | STATIC ssize_t | 
 | xfs_file_buffered_aio_write( | 
 | 	struct kiocb		*iocb, | 
 | 	struct iov_iter		*from) | 
 | { | 
 | 	struct file		*file = iocb->ki_filp; | 
 | 	struct address_space	*mapping = file->f_mapping; | 
 | 	struct inode		*inode = mapping->host; | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	ssize_t			ret; | 
 | 	int			enospc = 0; | 
 | 	int			iolock = XFS_IOLOCK_EXCL; | 
 |  | 
 | 	xfs_rw_ilock(ip, iolock); | 
 |  | 
 | 	ret = xfs_file_aio_write_checks(iocb, from, &iolock); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	/* We can write back this queue in page reclaim */ | 
 | 	current->backing_dev_info = inode_to_bdi(inode); | 
 |  | 
 | write_retry: | 
 | 	trace_xfs_file_buffered_write(ip, iov_iter_count(from), | 
 | 				      iocb->ki_pos, 0); | 
 | 	ret = generic_perform_write(file, from, iocb->ki_pos); | 
 | 	if (likely(ret >= 0)) | 
 | 		iocb->ki_pos += ret; | 
 |  | 
 | 	/* | 
 | 	 * If we hit a space limit, try to free up some lingering preallocated | 
 | 	 * space before returning an error. In the case of ENOSPC, first try to | 
 | 	 * write back all dirty inodes to free up some of the excess reserved | 
 | 	 * metadata space. This reduces the chances that the eofblocks scan | 
 | 	 * waits on dirty mappings. Since xfs_flush_inodes() is serialized, this | 
 | 	 * also behaves as a filter to prevent too many eofblocks scans from | 
 | 	 * running at the same time. | 
 | 	 */ | 
 | 	if (ret == -EDQUOT && !enospc) { | 
 | 		enospc = xfs_inode_free_quota_eofblocks(ip); | 
 | 		if (enospc) | 
 | 			goto write_retry; | 
 | 	} else if (ret == -ENOSPC && !enospc) { | 
 | 		struct xfs_eofblocks eofb = {0}; | 
 |  | 
 | 		enospc = 1; | 
 | 		xfs_flush_inodes(ip->i_mount); | 
 | 		eofb.eof_scan_owner = ip->i_ino; /* for locking */ | 
 | 		eofb.eof_flags = XFS_EOF_FLAGS_SYNC; | 
 | 		xfs_icache_free_eofblocks(ip->i_mount, &eofb); | 
 | 		goto write_retry; | 
 | 	} | 
 |  | 
 | 	current->backing_dev_info = NULL; | 
 | out: | 
 | 	xfs_rw_iunlock(ip, iolock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | STATIC ssize_t | 
 | xfs_file_write_iter( | 
 | 	struct kiocb		*iocb, | 
 | 	struct iov_iter		*from) | 
 | { | 
 | 	struct file		*file = iocb->ki_filp; | 
 | 	struct address_space	*mapping = file->f_mapping; | 
 | 	struct inode		*inode = mapping->host; | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	ssize_t			ret; | 
 | 	size_t			ocount = iov_iter_count(from); | 
 |  | 
 | 	XFS_STATS_INC(ip->i_mount, xs_write_calls); | 
 |  | 
 | 	if (ocount == 0) | 
 | 		return 0; | 
 |  | 
 | 	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) | 
 | 		return -EIO; | 
 |  | 
 | 	if ((iocb->ki_flags & IOCB_DIRECT) || IS_DAX(inode)) | 
 | 		ret = xfs_file_dio_aio_write(iocb, from); | 
 | 	else | 
 | 		ret = xfs_file_buffered_aio_write(iocb, from); | 
 |  | 
 | 	if (ret > 0) { | 
 | 		ssize_t err; | 
 |  | 
 | 		XFS_STATS_ADD(ip->i_mount, xs_write_bytes, ret); | 
 |  | 
 | 		/* Handle various SYNC-type writes */ | 
 | 		err = generic_write_sync(file, iocb->ki_pos - ret, ret); | 
 | 		if (err < 0) | 
 | 			ret = err; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | #define	XFS_FALLOC_FL_SUPPORTED						\ | 
 | 		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |		\ | 
 | 		 FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE |	\ | 
 | 		 FALLOC_FL_INSERT_RANGE) | 
 |  | 
 | STATIC long | 
 | xfs_file_fallocate( | 
 | 	struct file		*file, | 
 | 	int			mode, | 
 | 	loff_t			offset, | 
 | 	loff_t			len) | 
 | { | 
 | 	struct inode		*inode = file_inode(file); | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	long			error; | 
 | 	enum xfs_prealloc_flags	flags = 0; | 
 | 	uint			iolock = XFS_IOLOCK_EXCL; | 
 | 	loff_t			new_size = 0; | 
 | 	bool			do_file_insert = 0; | 
 |  | 
 | 	if (!S_ISREG(inode->i_mode)) | 
 | 		return -EINVAL; | 
 | 	if (mode & ~XFS_FALLOC_FL_SUPPORTED) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	xfs_ilock(ip, iolock); | 
 | 	error = xfs_break_layouts(inode, &iolock, false); | 
 | 	if (error) | 
 | 		goto out_unlock; | 
 |  | 
 | 	xfs_ilock(ip, XFS_MMAPLOCK_EXCL); | 
 | 	iolock |= XFS_MMAPLOCK_EXCL; | 
 |  | 
 | 	if (mode & FALLOC_FL_PUNCH_HOLE) { | 
 | 		error = xfs_free_file_space(ip, offset, len); | 
 | 		if (error) | 
 | 			goto out_unlock; | 
 | 	} else if (mode & FALLOC_FL_COLLAPSE_RANGE) { | 
 | 		unsigned blksize_mask = (1 << inode->i_blkbits) - 1; | 
 |  | 
 | 		if (offset & blksize_mask || len & blksize_mask) { | 
 | 			error = -EINVAL; | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * There is no need to overlap collapse range with EOF, | 
 | 		 * in which case it is effectively a truncate operation | 
 | 		 */ | 
 | 		if (offset + len >= i_size_read(inode)) { | 
 | 			error = -EINVAL; | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		new_size = i_size_read(inode) - len; | 
 |  | 
 | 		error = xfs_collapse_file_space(ip, offset, len); | 
 | 		if (error) | 
 | 			goto out_unlock; | 
 | 	} else if (mode & FALLOC_FL_INSERT_RANGE) { | 
 | 		unsigned blksize_mask = (1 << inode->i_blkbits) - 1; | 
 |  | 
 | 		new_size = i_size_read(inode) + len; | 
 | 		if (offset & blksize_mask || len & blksize_mask) { | 
 | 			error = -EINVAL; | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		/* check the new inode size does not wrap through zero */ | 
 | 		if (new_size > inode->i_sb->s_maxbytes) { | 
 | 			error = -EFBIG; | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		/* Offset should be less than i_size */ | 
 | 		if (offset >= i_size_read(inode)) { | 
 | 			error = -EINVAL; | 
 | 			goto out_unlock; | 
 | 		} | 
 | 		do_file_insert = 1; | 
 | 	} else { | 
 | 		flags |= XFS_PREALLOC_SET; | 
 |  | 
 | 		if (!(mode & FALLOC_FL_KEEP_SIZE) && | 
 | 		    offset + len > i_size_read(inode)) { | 
 | 			new_size = offset + len; | 
 | 			error = inode_newsize_ok(inode, new_size); | 
 | 			if (error) | 
 | 				goto out_unlock; | 
 | 		} | 
 |  | 
 | 		if (mode & FALLOC_FL_ZERO_RANGE) | 
 | 			error = xfs_zero_file_space(ip, offset, len); | 
 | 		else | 
 | 			error = xfs_alloc_file_space(ip, offset, len, | 
 | 						     XFS_BMAPI_PREALLOC); | 
 | 		if (error) | 
 | 			goto out_unlock; | 
 | 	} | 
 |  | 
 | 	if (file->f_flags & O_DSYNC) | 
 | 		flags |= XFS_PREALLOC_SYNC; | 
 |  | 
 | 	error = xfs_update_prealloc_flags(ip, flags); | 
 | 	if (error) | 
 | 		goto out_unlock; | 
 |  | 
 | 	/* Change file size if needed */ | 
 | 	if (new_size) { | 
 | 		struct iattr iattr; | 
 |  | 
 | 		iattr.ia_valid = ATTR_SIZE; | 
 | 		iattr.ia_size = new_size; | 
 | 		error = xfs_setattr_size(ip, &iattr); | 
 | 		if (error) | 
 | 			goto out_unlock; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Perform hole insertion now that the file size has been | 
 | 	 * updated so that if we crash during the operation we don't | 
 | 	 * leave shifted extents past EOF and hence losing access to | 
 | 	 * the data that is contained within them. | 
 | 	 */ | 
 | 	if (do_file_insert) | 
 | 		error = xfs_insert_file_space(ip, offset, len); | 
 |  | 
 | out_unlock: | 
 | 	xfs_iunlock(ip, iolock); | 
 | 	return error; | 
 | } | 
 |  | 
 |  | 
 | STATIC int | 
 | xfs_file_open( | 
 | 	struct inode	*inode, | 
 | 	struct file	*file) | 
 | { | 
 | 	if (!(file->f_flags & O_LARGEFILE) && i_size_read(inode) > MAX_NON_LFS) | 
 | 		return -EFBIG; | 
 | 	if (XFS_FORCED_SHUTDOWN(XFS_M(inode->i_sb))) | 
 | 		return -EIO; | 
 | 	return 0; | 
 | } | 
 |  | 
 | STATIC int | 
 | xfs_dir_open( | 
 | 	struct inode	*inode, | 
 | 	struct file	*file) | 
 | { | 
 | 	struct xfs_inode *ip = XFS_I(inode); | 
 | 	int		mode; | 
 | 	int		error; | 
 |  | 
 | 	error = xfs_file_open(inode, file); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	/* | 
 | 	 * If there are any blocks, read-ahead block 0 as we're almost | 
 | 	 * certain to have the next operation be a read there. | 
 | 	 */ | 
 | 	mode = xfs_ilock_data_map_shared(ip); | 
 | 	if (ip->i_d.di_nextents > 0) | 
 | 		xfs_dir3_data_readahead(ip, 0, -1); | 
 | 	xfs_iunlock(ip, mode); | 
 | 	return 0; | 
 | } | 
 |  | 
 | STATIC int | 
 | xfs_file_release( | 
 | 	struct inode	*inode, | 
 | 	struct file	*filp) | 
 | { | 
 | 	return xfs_release(XFS_I(inode)); | 
 | } | 
 |  | 
 | STATIC int | 
 | xfs_file_readdir( | 
 | 	struct file	*file, | 
 | 	struct dir_context *ctx) | 
 | { | 
 | 	struct inode	*inode = file_inode(file); | 
 | 	xfs_inode_t	*ip = XFS_I(inode); | 
 | 	size_t		bufsize; | 
 |  | 
 | 	/* | 
 | 	 * The Linux API doesn't pass down the total size of the buffer | 
 | 	 * we read into down to the filesystem.  With the filldir concept | 
 | 	 * it's not needed for correct information, but the XFS dir2 leaf | 
 | 	 * code wants an estimate of the buffer size to calculate it's | 
 | 	 * readahead window and size the buffers used for mapping to | 
 | 	 * physical blocks. | 
 | 	 * | 
 | 	 * Try to give it an estimate that's good enough, maybe at some | 
 | 	 * point we can change the ->readdir prototype to include the | 
 | 	 * buffer size.  For now we use the current glibc buffer size. | 
 | 	 */ | 
 | 	bufsize = (size_t)min_t(loff_t, 32768, ip->i_d.di_size); | 
 |  | 
 | 	return xfs_readdir(ip, ctx, bufsize); | 
 | } | 
 |  | 
 | /* | 
 |  * This type is designed to indicate the type of offset we would like | 
 |  * to search from page cache for xfs_seek_hole_data(). | 
 |  */ | 
 | enum { | 
 | 	HOLE_OFF = 0, | 
 | 	DATA_OFF, | 
 | }; | 
 |  | 
 | /* | 
 |  * Lookup the desired type of offset from the given page. | 
 |  * | 
 |  * On success, return true and the offset argument will point to the | 
 |  * start of the region that was found.  Otherwise this function will | 
 |  * return false and keep the offset argument unchanged. | 
 |  */ | 
 | STATIC bool | 
 | xfs_lookup_buffer_offset( | 
 | 	struct page		*page, | 
 | 	loff_t			*offset, | 
 | 	unsigned int		type) | 
 | { | 
 | 	loff_t			lastoff = page_offset(page); | 
 | 	bool			found = false; | 
 | 	struct buffer_head	*bh, *head; | 
 |  | 
 | 	bh = head = page_buffers(page); | 
 | 	do { | 
 | 		/* | 
 | 		 * Unwritten extents that have data in the page | 
 | 		 * cache covering them can be identified by the | 
 | 		 * BH_Unwritten state flag.  Pages with multiple | 
 | 		 * buffers might have a mix of holes, data and | 
 | 		 * unwritten extents - any buffer with valid | 
 | 		 * data in it should have BH_Uptodate flag set | 
 | 		 * on it. | 
 | 		 */ | 
 | 		if (buffer_unwritten(bh) || | 
 | 		    buffer_uptodate(bh)) { | 
 | 			if (type == DATA_OFF) | 
 | 				found = true; | 
 | 		} else { | 
 | 			if (type == HOLE_OFF) | 
 | 				found = true; | 
 | 		} | 
 |  | 
 | 		if (found) { | 
 | 			*offset = lastoff; | 
 | 			break; | 
 | 		} | 
 | 		lastoff += bh->b_size; | 
 | 	} while ((bh = bh->b_this_page) != head); | 
 |  | 
 | 	return found; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine is called to find out and return a data or hole offset | 
 |  * from the page cache for unwritten extents according to the desired | 
 |  * type for xfs_seek_hole_data(). | 
 |  * | 
 |  * The argument offset is used to tell where we start to search from the | 
 |  * page cache.  Map is used to figure out the end points of the range to | 
 |  * lookup pages. | 
 |  * | 
 |  * Return true if the desired type of offset was found, and the argument | 
 |  * offset is filled with that address.  Otherwise, return false and keep | 
 |  * offset unchanged. | 
 |  */ | 
 | STATIC bool | 
 | xfs_find_get_desired_pgoff( | 
 | 	struct inode		*inode, | 
 | 	struct xfs_bmbt_irec	*map, | 
 | 	unsigned int		type, | 
 | 	loff_t			*offset) | 
 | { | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	struct pagevec		pvec; | 
 | 	pgoff_t			index; | 
 | 	pgoff_t			end; | 
 | 	loff_t			endoff; | 
 | 	loff_t			startoff = *offset; | 
 | 	loff_t			lastoff = startoff; | 
 | 	bool			found = false; | 
 |  | 
 | 	pagevec_init(&pvec, 0); | 
 |  | 
 | 	index = startoff >> PAGE_CACHE_SHIFT; | 
 | 	endoff = XFS_FSB_TO_B(mp, map->br_startoff + map->br_blockcount); | 
 | 	end = endoff >> PAGE_CACHE_SHIFT; | 
 | 	do { | 
 | 		int		want; | 
 | 		unsigned	nr_pages; | 
 | 		unsigned int	i; | 
 |  | 
 | 		want = min_t(pgoff_t, end - index, PAGEVEC_SIZE); | 
 | 		nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index, | 
 | 					  want); | 
 | 		/* | 
 | 		 * No page mapped into given range.  If we are searching holes | 
 | 		 * and if this is the first time we got into the loop, it means | 
 | 		 * that the given offset is landed in a hole, return it. | 
 | 		 * | 
 | 		 * If we have already stepped through some block buffers to find | 
 | 		 * holes but they all contains data.  In this case, the last | 
 | 		 * offset is already updated and pointed to the end of the last | 
 | 		 * mapped page, if it does not reach the endpoint to search, | 
 | 		 * that means there should be a hole between them. | 
 | 		 */ | 
 | 		if (nr_pages == 0) { | 
 | 			/* Data search found nothing */ | 
 | 			if (type == DATA_OFF) | 
 | 				break; | 
 |  | 
 | 			ASSERT(type == HOLE_OFF); | 
 | 			if (lastoff == startoff || lastoff < endoff) { | 
 | 				found = true; | 
 | 				*offset = lastoff; | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * At lease we found one page.  If this is the first time we | 
 | 		 * step into the loop, and if the first page index offset is | 
 | 		 * greater than the given search offset, a hole was found. | 
 | 		 */ | 
 | 		if (type == HOLE_OFF && lastoff == startoff && | 
 | 		    lastoff < page_offset(pvec.pages[0])) { | 
 | 			found = true; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		for (i = 0; i < nr_pages; i++) { | 
 | 			struct page	*page = pvec.pages[i]; | 
 | 			loff_t		b_offset; | 
 |  | 
 | 			/* | 
 | 			 * At this point, the page may be truncated or | 
 | 			 * invalidated (changing page->mapping to NULL), | 
 | 			 * or even swizzled back from swapper_space to tmpfs | 
 | 			 * file mapping. However, page->index will not change | 
 | 			 * because we have a reference on the page. | 
 | 			 * | 
 | 			 * Searching done if the page index is out of range. | 
 | 			 * If the current offset is not reaches the end of | 
 | 			 * the specified search range, there should be a hole | 
 | 			 * between them. | 
 | 			 */ | 
 | 			if (page->index > end) { | 
 | 				if (type == HOLE_OFF && lastoff < endoff) { | 
 | 					*offset = lastoff; | 
 | 					found = true; | 
 | 				} | 
 | 				goto out; | 
 | 			} | 
 |  | 
 | 			lock_page(page); | 
 | 			/* | 
 | 			 * Page truncated or invalidated(page->mapping == NULL). | 
 | 			 * We can freely skip it and proceed to check the next | 
 | 			 * page. | 
 | 			 */ | 
 | 			if (unlikely(page->mapping != inode->i_mapping)) { | 
 | 				unlock_page(page); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			if (!page_has_buffers(page)) { | 
 | 				unlock_page(page); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			found = xfs_lookup_buffer_offset(page, &b_offset, type); | 
 | 			if (found) { | 
 | 				/* | 
 | 				 * The found offset may be less than the start | 
 | 				 * point to search if this is the first time to | 
 | 				 * come here. | 
 | 				 */ | 
 | 				*offset = max_t(loff_t, startoff, b_offset); | 
 | 				unlock_page(page); | 
 | 				goto out; | 
 | 			} | 
 |  | 
 | 			/* | 
 | 			 * We either searching data but nothing was found, or | 
 | 			 * searching hole but found a data buffer.  In either | 
 | 			 * case, probably the next page contains the desired | 
 | 			 * things, update the last offset to it so. | 
 | 			 */ | 
 | 			lastoff = page_offset(page) + PAGE_SIZE; | 
 | 			unlock_page(page); | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * The number of returned pages less than our desired, search | 
 | 		 * done.  In this case, nothing was found for searching data, | 
 | 		 * but we found a hole behind the last offset. | 
 | 		 */ | 
 | 		if (nr_pages < want) { | 
 | 			if (type == HOLE_OFF) { | 
 | 				*offset = lastoff; | 
 | 				found = true; | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		index = pvec.pages[i - 1]->index + 1; | 
 | 		pagevec_release(&pvec); | 
 | 	} while (index <= end); | 
 |  | 
 | out: | 
 | 	pagevec_release(&pvec); | 
 | 	return found; | 
 | } | 
 |  | 
 | STATIC loff_t | 
 | xfs_seek_hole_data( | 
 | 	struct file		*file, | 
 | 	loff_t			start, | 
 | 	int			whence) | 
 | { | 
 | 	struct inode		*inode = file->f_mapping->host; | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	struct xfs_mount	*mp = ip->i_mount; | 
 | 	loff_t			uninitialized_var(offset); | 
 | 	xfs_fsize_t		isize; | 
 | 	xfs_fileoff_t		fsbno; | 
 | 	xfs_filblks_t		end; | 
 | 	uint			lock; | 
 | 	int			error; | 
 |  | 
 | 	if (XFS_FORCED_SHUTDOWN(mp)) | 
 | 		return -EIO; | 
 |  | 
 | 	lock = xfs_ilock_data_map_shared(ip); | 
 |  | 
 | 	isize = i_size_read(inode); | 
 | 	if (start >= isize) { | 
 | 		error = -ENXIO; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Try to read extents from the first block indicated | 
 | 	 * by fsbno to the end block of the file. | 
 | 	 */ | 
 | 	fsbno = XFS_B_TO_FSBT(mp, start); | 
 | 	end = XFS_B_TO_FSB(mp, isize); | 
 |  | 
 | 	for (;;) { | 
 | 		struct xfs_bmbt_irec	map[2]; | 
 | 		int			nmap = 2; | 
 | 		unsigned int		i; | 
 |  | 
 | 		error = xfs_bmapi_read(ip, fsbno, end - fsbno, map, &nmap, | 
 | 				       XFS_BMAPI_ENTIRE); | 
 | 		if (error) | 
 | 			goto out_unlock; | 
 |  | 
 | 		/* No extents at given offset, must be beyond EOF */ | 
 | 		if (nmap == 0) { | 
 | 			error = -ENXIO; | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		for (i = 0; i < nmap; i++) { | 
 | 			offset = max_t(loff_t, start, | 
 | 				       XFS_FSB_TO_B(mp, map[i].br_startoff)); | 
 |  | 
 | 			/* Landed in the hole we wanted? */ | 
 | 			if (whence == SEEK_HOLE && | 
 | 			    map[i].br_startblock == HOLESTARTBLOCK) | 
 | 				goto out; | 
 |  | 
 | 			/* Landed in the data extent we wanted? */ | 
 | 			if (whence == SEEK_DATA && | 
 | 			    (map[i].br_startblock == DELAYSTARTBLOCK || | 
 | 			     (map[i].br_state == XFS_EXT_NORM && | 
 | 			      !isnullstartblock(map[i].br_startblock)))) | 
 | 				goto out; | 
 |  | 
 | 			/* | 
 | 			 * Landed in an unwritten extent, try to search | 
 | 			 * for hole or data from page cache. | 
 | 			 */ | 
 | 			if (map[i].br_state == XFS_EXT_UNWRITTEN) { | 
 | 				if (xfs_find_get_desired_pgoff(inode, &map[i], | 
 | 				      whence == SEEK_HOLE ? HOLE_OFF : DATA_OFF, | 
 | 							&offset)) | 
 | 					goto out; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * We only received one extent out of the two requested. This | 
 | 		 * means we've hit EOF and didn't find what we are looking for. | 
 | 		 */ | 
 | 		if (nmap == 1) { | 
 | 			/* | 
 | 			 * If we were looking for a hole, set offset to | 
 | 			 * the end of the file (i.e., there is an implicit | 
 | 			 * hole at the end of any file). | 
 | 		 	 */ | 
 | 			if (whence == SEEK_HOLE) { | 
 | 				offset = isize; | 
 | 				break; | 
 | 			} | 
 | 			/* | 
 | 			 * If we were looking for data, it's nowhere to be found | 
 | 			 */ | 
 | 			ASSERT(whence == SEEK_DATA); | 
 | 			error = -ENXIO; | 
 | 			goto out_unlock; | 
 | 		} | 
 |  | 
 | 		ASSERT(i > 1); | 
 |  | 
 | 		/* | 
 | 		 * Nothing was found, proceed to the next round of search | 
 | 		 * if the next reading offset is not at or beyond EOF. | 
 | 		 */ | 
 | 		fsbno = map[i - 1].br_startoff + map[i - 1].br_blockcount; | 
 | 		start = XFS_FSB_TO_B(mp, fsbno); | 
 | 		if (start >= isize) { | 
 | 			if (whence == SEEK_HOLE) { | 
 | 				offset = isize; | 
 | 				break; | 
 | 			} | 
 | 			ASSERT(whence == SEEK_DATA); | 
 | 			error = -ENXIO; | 
 | 			goto out_unlock; | 
 | 		} | 
 | 	} | 
 |  | 
 | out: | 
 | 	/* | 
 | 	 * If at this point we have found the hole we wanted, the returned | 
 | 	 * offset may be bigger than the file size as it may be aligned to | 
 | 	 * page boundary for unwritten extents.  We need to deal with this | 
 | 	 * situation in particular. | 
 | 	 */ | 
 | 	if (whence == SEEK_HOLE) | 
 | 		offset = min_t(loff_t, offset, isize); | 
 | 	offset = vfs_setpos(file, offset, inode->i_sb->s_maxbytes); | 
 |  | 
 | out_unlock: | 
 | 	xfs_iunlock(ip, lock); | 
 |  | 
 | 	if (error) | 
 | 		return error; | 
 | 	return offset; | 
 | } | 
 |  | 
 | STATIC loff_t | 
 | xfs_file_llseek( | 
 | 	struct file	*file, | 
 | 	loff_t		offset, | 
 | 	int		whence) | 
 | { | 
 | 	switch (whence) { | 
 | 	case SEEK_END: | 
 | 	case SEEK_CUR: | 
 | 	case SEEK_SET: | 
 | 		return generic_file_llseek(file, offset, whence); | 
 | 	case SEEK_HOLE: | 
 | 	case SEEK_DATA: | 
 | 		return xfs_seek_hole_data(file, offset, whence); | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Locking for serialisation of IO during page faults. This results in a lock | 
 |  * ordering of: | 
 |  * | 
 |  * mmap_sem (MM) | 
 |  *   sb_start_pagefault(vfs, freeze) | 
 |  *     i_mmaplock (XFS - truncate serialisation) | 
 |  *       page_lock (MM) | 
 |  *         i_lock (XFS - extent map serialisation) | 
 |  */ | 
 |  | 
 | /* | 
 |  * mmap()d file has taken write protection fault and is being made writable. We | 
 |  * can set the page state up correctly for a writable page, which means we can | 
 |  * do correct delalloc accounting (ENOSPC checking!) and unwritten extent | 
 |  * mapping. | 
 |  */ | 
 | STATIC int | 
 | xfs_filemap_page_mkwrite( | 
 | 	struct vm_area_struct	*vma, | 
 | 	struct vm_fault		*vmf) | 
 | { | 
 | 	struct inode		*inode = file_inode(vma->vm_file); | 
 | 	int			ret; | 
 |  | 
 | 	trace_xfs_filemap_page_mkwrite(XFS_I(inode)); | 
 |  | 
 | 	sb_start_pagefault(inode->i_sb); | 
 | 	file_update_time(vma->vm_file); | 
 | 	xfs_ilock(XFS_I(inode), XFS_MMAPLOCK_SHARED); | 
 |  | 
 | 	if (IS_DAX(inode)) { | 
 | 		ret = __dax_mkwrite(vma, vmf, xfs_get_blocks_dax_fault, NULL); | 
 | 	} else { | 
 | 		ret = block_page_mkwrite(vma, vmf, xfs_get_blocks); | 
 | 		ret = block_page_mkwrite_return(ret); | 
 | 	} | 
 |  | 
 | 	xfs_iunlock(XFS_I(inode), XFS_MMAPLOCK_SHARED); | 
 | 	sb_end_pagefault(inode->i_sb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | STATIC int | 
 | xfs_filemap_fault( | 
 | 	struct vm_area_struct	*vma, | 
 | 	struct vm_fault		*vmf) | 
 | { | 
 | 	struct inode		*inode = file_inode(vma->vm_file); | 
 | 	int			ret; | 
 |  | 
 | 	trace_xfs_filemap_fault(XFS_I(inode)); | 
 |  | 
 | 	/* DAX can shortcut the normal fault path on write faults! */ | 
 | 	if ((vmf->flags & FAULT_FLAG_WRITE) && IS_DAX(inode)) | 
 | 		return xfs_filemap_page_mkwrite(vma, vmf); | 
 |  | 
 | 	xfs_ilock(XFS_I(inode), XFS_MMAPLOCK_SHARED); | 
 | 	if (IS_DAX(inode)) { | 
 | 		/* | 
 | 		 * we do not want to trigger unwritten extent conversion on read | 
 | 		 * faults - that is unnecessary overhead and would also require | 
 | 		 * changes to xfs_get_blocks_direct() to map unwritten extent | 
 | 		 * ioend for conversion on read-only mappings. | 
 | 		 */ | 
 | 		ret = __dax_fault(vma, vmf, xfs_get_blocks_dax_fault, NULL); | 
 | 	} else | 
 | 		ret = filemap_fault(vma, vmf); | 
 | 	xfs_iunlock(XFS_I(inode), XFS_MMAPLOCK_SHARED); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Similar to xfs_filemap_fault(), the DAX fault path can call into here on | 
 |  * both read and write faults. Hence we need to handle both cases. There is no | 
 |  * ->pmd_mkwrite callout for huge pages, so we have a single function here to | 
 |  * handle both cases here. @flags carries the information on the type of fault | 
 |  * occuring. | 
 |  */ | 
 | STATIC int | 
 | xfs_filemap_pmd_fault( | 
 | 	struct vm_area_struct	*vma, | 
 | 	unsigned long		addr, | 
 | 	pmd_t			*pmd, | 
 | 	unsigned int		flags) | 
 | { | 
 | 	struct inode		*inode = file_inode(vma->vm_file); | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	int			ret; | 
 |  | 
 | 	if (!IS_DAX(inode)) | 
 | 		return VM_FAULT_FALLBACK; | 
 |  | 
 | 	trace_xfs_filemap_pmd_fault(ip); | 
 |  | 
 | 	if (flags & FAULT_FLAG_WRITE) { | 
 | 		sb_start_pagefault(inode->i_sb); | 
 | 		file_update_time(vma->vm_file); | 
 | 	} | 
 |  | 
 | 	xfs_ilock(XFS_I(inode), XFS_MMAPLOCK_SHARED); | 
 | 	ret = __dax_pmd_fault(vma, addr, pmd, flags, xfs_get_blocks_dax_fault, | 
 | 			      NULL); | 
 | 	xfs_iunlock(XFS_I(inode), XFS_MMAPLOCK_SHARED); | 
 |  | 
 | 	if (flags & FAULT_FLAG_WRITE) | 
 | 		sb_end_pagefault(inode->i_sb); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * pfn_mkwrite was originally inteneded to ensure we capture time stamp | 
 |  * updates on write faults. In reality, it's need to serialise against | 
 |  * truncate similar to page_mkwrite. Hence we cycle the XFS_MMAPLOCK_SHARED | 
 |  * to ensure we serialise the fault barrier in place. | 
 |  */ | 
 | static int | 
 | xfs_filemap_pfn_mkwrite( | 
 | 	struct vm_area_struct	*vma, | 
 | 	struct vm_fault		*vmf) | 
 | { | 
 |  | 
 | 	struct inode		*inode = file_inode(vma->vm_file); | 
 | 	struct xfs_inode	*ip = XFS_I(inode); | 
 | 	int			ret = VM_FAULT_NOPAGE; | 
 | 	loff_t			size; | 
 |  | 
 | 	trace_xfs_filemap_pfn_mkwrite(ip); | 
 |  | 
 | 	sb_start_pagefault(inode->i_sb); | 
 | 	file_update_time(vma->vm_file); | 
 |  | 
 | 	/* check if the faulting page hasn't raced with truncate */ | 
 | 	xfs_ilock(ip, XFS_MMAPLOCK_SHARED); | 
 | 	size = (i_size_read(inode) + PAGE_SIZE - 1) >> PAGE_SHIFT; | 
 | 	if (vmf->pgoff >= size) | 
 | 		ret = VM_FAULT_SIGBUS; | 
 | 	else if (IS_DAX(inode)) | 
 | 		ret = dax_pfn_mkwrite(vma, vmf); | 
 | 	xfs_iunlock(ip, XFS_MMAPLOCK_SHARED); | 
 | 	sb_end_pagefault(inode->i_sb); | 
 | 	return ret; | 
 |  | 
 | } | 
 |  | 
 | static const struct vm_operations_struct xfs_file_vm_ops = { | 
 | 	.fault		= xfs_filemap_fault, | 
 | 	.pmd_fault	= xfs_filemap_pmd_fault, | 
 | 	.map_pages	= filemap_map_pages, | 
 | 	.page_mkwrite	= xfs_filemap_page_mkwrite, | 
 | 	.pfn_mkwrite	= xfs_filemap_pfn_mkwrite, | 
 | }; | 
 |  | 
 | STATIC int | 
 | xfs_file_mmap( | 
 | 	struct file	*filp, | 
 | 	struct vm_area_struct *vma) | 
 | { | 
 | 	file_accessed(filp); | 
 | 	vma->vm_ops = &xfs_file_vm_ops; | 
 | 	if (IS_DAX(file_inode(filp))) | 
 | 		vma->vm_flags |= VM_MIXEDMAP | VM_HUGEPAGE; | 
 | 	return 0; | 
 | } | 
 |  | 
 | const struct file_operations xfs_file_operations = { | 
 | 	.llseek		= xfs_file_llseek, | 
 | 	.read_iter	= xfs_file_read_iter, | 
 | 	.write_iter	= xfs_file_write_iter, | 
 | 	.splice_read	= xfs_file_splice_read, | 
 | 	.splice_write	= iter_file_splice_write, | 
 | 	.unlocked_ioctl	= xfs_file_ioctl, | 
 | #ifdef CONFIG_COMPAT | 
 | 	.compat_ioctl	= xfs_file_compat_ioctl, | 
 | #endif | 
 | 	.mmap		= xfs_file_mmap, | 
 | 	.open		= xfs_file_open, | 
 | 	.release	= xfs_file_release, | 
 | 	.fsync		= xfs_file_fsync, | 
 | 	.fallocate	= xfs_file_fallocate, | 
 | }; | 
 |  | 
 | const struct file_operations xfs_dir_file_operations = { | 
 | 	.open		= xfs_dir_open, | 
 | 	.read		= generic_read_dir, | 
 | 	.iterate	= xfs_file_readdir, | 
 | 	.llseek		= generic_file_llseek, | 
 | 	.unlocked_ioctl	= xfs_file_ioctl, | 
 | #ifdef CONFIG_COMPAT | 
 | 	.compat_ioctl	= xfs_file_compat_ioctl, | 
 | #endif | 
 | 	.fsync		= xfs_dir_fsync, | 
 | }; |